You are on page 1of 115

9/29/2011

List of DIN standards - Wikipedia, th

List of DIN standards


From Wikipedia, the free encyclopedia

This is an incomplete list of DIN standards. The "STATUS" column gives the latest known status of the standard. If a standard has been withdrawn and no replacement specification is listed, either the specification was withdrawn without replacement or a replacement specification could not be identified. DIN standards that begin with "DIN V" ("Vornorm", meaning "pre-issue") are the result of standardization work, but because of certain reservations on the content or because of the divergent compared to a standard installation procedure of DIN, they are not yet published standards.

Contents
1 DIN 1 to DIN 999 1.1 DIN 1 to DIN 99 1.2 DIN 100 to DIN 199 1.3 DIN 200 to DIN 299 1.4 DIN 300 to DIN 399 1.5 DIN 400 to DIN 499 1.6 DIN 500 to DIN 599 1.7 DIN 600 to DIN 699 1.8 DIN 700 to DIN 799 1.9 DIN 800 to DIN 899 1.10 DIN 900 to DIN 999 2 DIN 1000 to DIN 9999 2.1 DIN 1000 to DIN 1999 2.2 DIN 2000 to DIN 2999 2.3 DIN 4000 to DIN 4999 2.4 DIN 5000 to DIN 5999 2.5 DIN 6000 to DIN 6999 2.6 DIN 7000 to DIN 7999 2.7 DIN 8000 to DIN 8999 2.8 DIN 9000 to DIN 9999 3 DIN 10000 to DIN 19999 3.1 DIN 10000 to DIN 10999 3.2 DIN 11000 to DIN 11999 3.3 DIN 12000 to DIN 12999 3.4 DIN 13000 to DIN 13999 3.5 DIN 14000 to DIN 14999 3.6 DIN 15000 to DIN 15999 3.7 DIN 16000 to DIN 16999 3.8 DIN 17000 to DIN 17999 3.9 DIN 18000 to DIN 18999 3.10 DIN 19000 to DIN 19999
wikipedia.org//List_of_DIN_stand 1/115

9/29/2011

List of DIN standards - Wikipedia, th

4 DIN 20000 to DIN 29999 4.1 DIN 24000 to DIN 24999 4.2 DIN 28000 to DIN 28999 5 DIN 30000 to DIN 39999 5.1 DIN 31000 to DIN 31999 6 DIN 40000 to DIN 49999 7 DIN 50000 to DIN 59999 8 DIN 60000 to DIN 69999 9 DIN 70000 to DIN 79999 10 See also 11 External links

DIN 1 to DIN 999


DIN 1 to DIN 99
DIN DIN 1 DIN 3 TITLE Cone Pins, untempered STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT ISO 2339

Withdrawn DIN EN 22339

Standard Withdrawn measurements Technical DIN ISO 5456-1, DIN ISO drawings 5456-2, Axonometric Withdrawn DIN ISO 5456-3, DIN ISO projections, 5456-4 Isometric projection Technical drawings projections, terms

DIN 5

ISO 5456-1, ISO 5456-2, ISO 5456-3, ISO 5456-4

DIN 5-10

Withdrawn DIN ISO 10209-2

ISO 10209-2

DIN 6

Projection displays in DIN ISO 128, DIN EN ISO Normal, Withdrawn 128 views and special presentations Parallel Pins Whitworth pipe threads 1/4"-6" Thread diameter, Withdrawn DIN EN ISO 2338

ISO 128

DIN 7

ISO 2338

DIN 11

Withdrawn
2/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

sizes, teaching information ISO general purpose metric screw threads - Part 1: Nominal sizes for Active coarse pitch threads; nominal diameter from 1 mm to 68 mm ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, Active 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm ISO general purpose metric screw threads - Part 3: Nominal sizes for Active 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm ISO general purpose metric screw threads - Part 4: Nominal sizes for Active 0,75 mm fine
3/115

DIN 13-1

DIN 13-2

DIN 13-3

DIN 13-4

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 13-5

pitch threads; nominal diameter from 5 mm to 110 mm ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and Active 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm ISO general purpose metric screw threads - Part 6: Nominal sizes for Active 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm ISO general purpose metric screw threads - Part 7: Nominal sizes for Active 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm ISO general purpose metric screw threads - Part 8: Nominal sizes for

DIN 13-6

DIN 13-7

wikipedia.org//List_of_DIN_stand

4/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 13-8

Active 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm ISO general purpose metric screw threads - Part 9: Nominal sizes for Active 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm ISO general purpose metric screw threads - Part 10: Nominal sizes for Active 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm ISO general purpose metric screw threads - Part 11: Nominal sizes for Active 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm ISO general purpose metric screw threads - Part 12: 1 to

DIN 13-9

DIN 13-10

DIN 13-11

wikipedia.org//List_of_DIN_stand

5/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 13-12

DIN 13-13

300 mm Active diameter coarse and fine pitch threads Selected diameters and pitches ISO general purpose metric screw threads - Part 13: Selected sizes for Active screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes ISO general purpose metric screw Active threads - Part 19: Nominal profiles ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch Active threads with the preferred tolerance classes; nominal sizes from 1 mm to 68 mm ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads

DIN 13-19

DIN 13-20

wikipedia.org//List_of_DIN_stand

6/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 13-21

DIN 13-22

Active with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads Active with the preferred tolerance classes; Nominal diameter from 25 mm to 52 mm ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the Active preferred tolerance classes; Nominal diameter from 53 mm to 110 mm ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads Active with the preferred tolerance
7/115

DIN 13-23

DIN 13-24

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 13-25

classes; Nominal diameter from 112 mm to 180 mm ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads Active with the preferred tolerance classes; Nominal diameter from 182 mm to 250 mm ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the Active preferred tolerance classes; Nominal diameter from 252 mm to 1000 mm ISO general purpose metric screw threads - Part 28: Coarse and Fine Screw Threads from 1 to 250 mm Active Screw Thread Diameter;
8/115

DIN 13-26

DIN 13-28

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 13-50

Root Crosssections, Tensile Stress Crosssections and Pitch Angles ISO general purpose metric screw threads - Part 50: Combination Active of tolerance classes for formed internal screw threads ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: Active screw threads for interference fit); tolerances, limit deviations, limits of sizes ISO general purpose metric screw threads - Part Active 52: Multistart thread tolerances and deviation of profile Thread runouts and thread undercuts for ISO metric Active threads in
9/115

DIN 13-51

DIN 13-52

DIN 76-1

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

accordance with DIN 131 Thread runouts and thread undercuts for Active pipe threads conforming to ISO 228 part 1 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Active Knuckle Threads and other Threads of Coarse Pitch Protrusions of Active bolt ends DIN EN ISO 4753 (governs thread ends for bolts assembled with hexagon slotted nuts)

DIN 76-2

DIN 76-3

DIN 78

ISO 4753

DIN 84

Product grade A Withdrawn DIN EN ISO 1207 slotted cheese head screws Product grade A slotted pan head screws

ISO 1207

DIN 85

Withdrawn DIN EN ISO 1580

ISO 1580

DIN 93 DIN 94

Tab washers Withdrawn DIN EN ISO 1234 with long tab Split pins Withdrawn DIN EN ISO 1234 Slotted Raised Countersunk Active (Oval) Head Wood Screws Slotted Round Head

ISO 1234 ISO 1234

DIN 95

wikipedia.org//List_of_DIN_stand

10/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 96

Wood Screws

Active

DIN 100 to DIN 199


DIN TITLE ISO Metric Trapezoidal Screw Thread; Profiles ISO Metric Trapezoidal Screw Thread; General Plan ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose ISO Metric Trapezoidal Screw Thread; Nominal Dimensions ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm
11/115

STATUS

DIN REPLACEMENT

OTHER ORG REPLACEMENT

DIN 103-1

DIN 103-2

DIN 103-3

DIN 103-4

DIN 103-5

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

Nominal Diameter ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge
12/115

DIN 103-6

DIN 103-7

DIN 103-8

DIN 103-9

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN V 105-1

dimensions and design features Clay masonry units - Part 1: Solid and hollow Withdrawn DIN V 105-100, DIN EN 771-1 bricks with density classes of 1,2 Clay masonry units - Part 2: Solid DIN V 105-100, DIN EN and hollow Withdrawn 771-1 bricks with density classes equal 1.0 Clay masonry units - Part 3: Tile and DIN V 105-100, DIN EN Withdrawn high 771-1 strengthhighstrength clinker Clay DIN V 105-100, DIN EN masonry units - Part Withdrawn 771-1, DIN EN 772-7 4: Ceramic bricks Clay masonry units - Part 5: Lightweight Active long-hole brick and light longhole brick panels Clay

EN 771-1

DIN V 105-2

EN 771-1

DIN 105-3

EN 771-1

DIN 105-4

EN 771-1, EN 772-7

DIN 105-5

wikipedia.org//List_of_DIN_stand

13/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN V 105-6

DIN V 105100

masonry units - Part Active 6: High precision units Clay masonry units - Part 100: Clay Active masonry units with specific properties Washers; medium DIN EN ISO 7089, type, Withdrawn DIN EN ISO 7090 primarily for hexagon bolts Product grade A washers with a hardness DIN EN ISO 7089, up to 250 Withdrawn DIN EN ISO 7090 HV designed for use with hexagon head bolts and nuts Product grade A washers with a hardness DIN EN ISO 7089, up to 300 Withdrawn DIN EN ISO 7090 HV designed for use with hexagon head bolts and nuts Product grade C washers designed

DIN 125

ISO 7089, ISO 7090

DIN 125-1

ISO 7089, ISO 7090

DIN 125-2

ISO 7089, ISO 7090

DIN 126

Withdrawn DIN EN ISO 7091

ISO 7091
14/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 127

for use with hexagon head bolts and nut Spring lock washers with square Withdrawn ends or tang ends Curved and wave spring lock Withdrawn washers Spring washers, curved or wave

DIN 128

DIN 137

Withdrawn

DIN 200 to DIN 299


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 201

Technical drawings; Hatchings; Representation Withdrawn DIN ISO 128-50 of cutting edges and materials Machine Reamers with Active Screwed-on Blades Fasteners Part 1: Technical delivery conditions; General requirements Fasteners Part 2: Technical delivery conditions; Bolts, Screws,

ISO 128-50

DIN 209

DIN 267-1

Withdrawn

wikipedia.org//List_of_DIN_stand

15/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 267-2

DIN 267-3

Active DIN EN ISO 4759-1 Nuts and Similar Threaded and Formed Parts; Types and Dimensional Accuracy Fasteners Part 3: Technical delivery conditions; Property classes for Withdrawn DIN EN ISO 898-1 carbon steel and alloy steel bolts and screws; Conversion of property classes Fasteners Part 4: Technical delivery Withdrawn DIN EN ISO 898-2 conditions; Property classes for nuts (previous classes) Fasteners Part 5: Technical delivery conditions; Withdrawn DIN EN ISO 3269 Acceptance inspection; modified version of ISO 3269, 1984 edition Fasteners Part 6: Technical delivery conditions; Designs and accuracy of

ISO 4759-1

ISO 898-1

DIN 267-4

ISO 898-2

DIN 267-5

ISO 3269

DIN 267-6

Active
16/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

measurement for product grade F Fasteners Part 9: Technical delivery conditions; Withdrawn DIN EN ISO 898-1 Bolts made of unalloyed or low-alloy steels Fasteners Part 9: Technical delivery conditions; Components with Electroplated Coatings Fasteners Part 10: Technical delivery conditions; Hot dip galvanized parts

DIN 267-7

ISO 898-1

DIN 267-9

Withdrawn DIN EN ISO 4042

ISO 4042

DIN 267-10

Withdrawn DIN EN ISO 10684

ISO 10684

DIN 267-11

Fasteners Part 11: Technical delivery conditions (with additions Withdrawn to ISO 3506); Corrosionresistant stainless steel fasteners Fasteners Part 12: Technical delivery conditions; Self-tapping

DIN 267-12

Withdrawn DIN EN ISO 2702

ISO 2702

wikipedia.org//List_of_DIN_stand

17/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 267-13

screws Fasteners Part 13: Technical delivery conditions; Components for Bolted Connections Made Mainly from Materials Active Exhibiting a High Impact Strength at Low Temperature or from Materials with a High Temperature Strength Fasteners Part 15: Technical delivery conditions; Prevailing torque type nuts

DIN 267-15

DIN EN ISO 2320, DIN EN ISO 3506-1, Withdrawn DIN EN ISO 3506-2, DIN EN ISO 3506-3

ISO 2320, ISO 3506-1, ISO 3506-2, ISO 3506-3

DIN 267-18

Fasteners Part 18: Technical delivery Withdrawn DIN EN 28839 conditions; Components made of Nonferrous Metals Fasteners Part 19: Technical delivery DIN EN ISO 26157-1, Withdrawn conditions; DIN EN ISO 26157-3 Surface discontinuities on bolts and screws

ISO 8839

DIN 267-19

ISO 6157-1, ISO 6157-3

wikipedia.org//List_of_DIN_stand

18/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 267-20

DIN 267-21

Fasteners Part 20: DIN EN ISO 6157-2, Technical Withdrawn DIN EN ISO 10484, delivery DIN EN ISO 10485 conditions; Surface discontinuities on nuts Fasteners Part 21: Technical DIN EN ISO 6157-2, delivery Withdrawn DIN EN ISO 10484, conditions; DIN EN ISO 10485 Widening test on nuts Fasteners Part 23: Technical delivery conditions; Property classes for nuts with fine thread (ISO classes)

ISO 6157-2, ISO 10484, ISO 10485

ISO 6157-2, ISO 10484, ISO 10485

DIN 267-23

Withdrawn DIN EN ISO 898-6

ISO 898-6

DIN 267-24

Fasteners Part 24: Technical delivery Active conditions; Property classes for nuts (Hardness classes) Fasteners Part 25: Technical delivery Withdrawn DIN EN 20898-7 conditions; Torsion testing of M1 to M10 bolts and screws Fasteners Part 26: Technical delivery

DIN 267-25

EN 20898-7

wikipedia.org//List_of_DIN_stand

19/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 267-26

DIN 267-27

Active conditions; Conical spring washers for bolt/nut assemblies Fasteners Part 27: Technical specifications; Active Steel screws, bolts and studs with adhesive coating Fasteners Part 28: Technical specifications; Steel screws, Active bolts and studs with locking coating Fasteners Part 29: Technical specifications; Product grades for parts for Withdrawn bolted connections for use at temperatures ranging from 200C to +700C Fasteners Part 30: Technical specifications; Active Metric thread rolling screws of property class 10.9 Building costs; Part 1: Active Building construction
20/115

DIN 267-28

DIN 267-29

DIN 267-30

DIN 276-1

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 276-2

DIN 276-3

Building costs; Part 2: Withdrawn Classification of cost Building costs; Part 3: Withdrawn Ascertainment of cost

DIN 300 to DIN 399


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 315

Wing nuts with rounded Active wings Wing screws with rounded Active wings Preferred Numbers and Series of Preferred Numbers; Withdrawn Basic Values, Calculated Values, Rounded Values Preferred Numbers and Series of Active Preferred Numbers; Introduction 60 centre holes; types Active R, A, B, and C Center holes 60 with thread for shaft ends for Active rotating electrical
21/115

DIN 316

DIN 323-1

DIN 323-2

DIN 332-1

DIN 332-2

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 332-4

machines Centre holes for rail Active vehicles axles Machine tools; 60 Active centre holes; dimensioning Centre holes 90, form S; dimensions, Active determination process Center Holes; Indications Withdrawn DIN ISO 6411 on Technical Drawings Parallel shank twist Active drills, jobber series

DIN 332-7

DIN 332-8

DIN 332-10

ISO 6411

DIN 338

DIN 400 to DIN 499


DIN TITLE Slotted capstan screws STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 404

Active

DIN 406-10

Engineering drawing practice; dimensioning; Active concepts and general principles Engineering drawing practice; Active dimensioning; principles of application Engineering drawing practice;

DIN 406-11

wikipedia.org//List_of_DIN_stand

22/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 406-12

dimensioning; tolerancing of linear and Active angular dimensions (modified version of ISO 406:1987) Slotted set screws with Withdrawn DIN EN 27435 long dog point Slotted headless Withdrawn DIN EN ISO 2342 screws with chamfered end Hexagon nuts, Withdrawn DIN EN ISO 4034 Grade C Washers for use with cheese head screws

DIN 417

ISO 7435

DIN 427

ISO 2342

DIN 428

ISO 4034

DIN 433

Withdrawn DIN EN ISO 7092

ISO 7092

DIN 433-1

Product grade A washers with a hardness up to Withdrawn DIN EN ISO 7092 250 HV designed for use with cheese head screws Product grade A washers with a hardness up to Withdrawn DIN EN ISO 7092 300 HV designed for use with cheese head screws Slotted set screws with cup point Hexagon thin nuts Withdrawn DIN EN 27436

ISO 7092

DIN 433-2

ISO 7092

DIN 438

ISO 7436

DIN 439

DIN EN ISO 4035, DIN EN ISO 4035, ISO 4036, Withdrawn ISO 4036, DIN EN ISO ISO 8675 8675
23/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 439-1

DIN 439-2

Unchamfered hexagon thin Withdrawn DIN EN ISO 4036 ISO 4036 nuts - Product grade B Chamfered hexagon thin DIN EN ISO 4035, DIN EN ISO 4035, ISO 8675 nuts - Product Withdrawn ISO 8675 grades A and B Washers for use in timber constructions Eyebolts Withdrawn DIN EN ISO 7094 Active ISO 7094

DIN 440 DIN 444

DIN 461

Graphical Representation Active in Systems of Coordinates Machine Tools; Internal Tab Washers for Slotted Round Nuts Active for Hook Spanner according to DIN 1804 Knurled thumb screws, high Active type Knurled nuts, high type Knurled nuts, low type Active Active

DIN 462

DIN 464

DIN 466 DIN 467

DIN 471

Circlips (retaining rings) for Active shafts; Normal type and heavy type Paper sizes Withdrawn DIN EN ISO 216 ISO 216 Trimmed Sizes of Paper - C Active Series

DIN 476 DIN 476-2 DIN 477

wikipedia.org//List_of_DIN_stand

24/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 479

Square head bolts with short dog point

Active

DIN 500 to DIN 599


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 522

Metal washers; technical Withdrawn DIN EN ISO 4759-3 delivery conditions Round nuts with Active set pin holes in side Slotted set screws with flat point

ISO 4759-3

DIN 548

DIN 551

Withdrawn DIN EN 24766

ISO 4766

DIN 553

Slotted set Withdrawn DIN EN 27434 screws with cone point M5 to M100x6 hexagon Withdrawn DIN EN ISO 4034 nuts Product grade C Hexagon head Withdrawn DIN EN ISO 4018 screws Collar eyebolts Active for lifting purposes

ISO 7434

DIN 555

ISO 4034

DIN 558

ISO 4018

DIN 580

DIN 600 to DIN 699


TITLE STATUS OTHER ORG
25/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN

DIN REPLACEMENT M5 to M52 hexagon Withdrawn DIN EN ISO 4016 head bolts; product grade C Mushroom head Active square neck bolts Hexagon fits bolts with long thread

REPLACEMENT

DIN 601

ISO 4016

DIN 603

DIN 609

Active

DIN 625-1

Rolling bearings; single row Active radial contact ball bearings Rolling bearings; double row radial Active contact ball bearings Rolling bearings; radial contact groove Active ball bearings with flanged outer ring Knurled thumb screws, low type

DIN 625-3

DIN 625-4

DIN 653

Active

DIN 678-1

Envelopes - Part 1: Active Sizes


26/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 678-2

Envelopes - Part 2: Envelopes for Processing Active in Enveloping Machines, Size C6 to C4

DIN 700 to DIN 799


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 763

Tested, noncalibrated, Active long-link round steel chains Calibrated and tested round steel link chains Active for continuous conveyors; grade 2, pitch 3,5d Calibrated and tested round steel link chains Active for continuous conveyors; grade 3, pitch 3,5d Calibrated and tested Active grade 3 round steel link chains Foundation Active Blocks
27/115

DIN 764-1

DIN 764-2

DIN 766

DIN 799-1

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 800 to DIN 899


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

Standards DIN12 820-1 Work - Part 1: Active Principles Standardization - Part 2: Presentation of standards; Active examples for presentation of figures, tables and part lists Standardization - Pdfart 3: Active Concepts Standardization - Part 4: Active Working procedure Standardization - Part 11: Presentation of Standards concerning safety Active regulations which are VDESpecifications or VDEGuidelines Standardization - Part 12: Presentation of Active standards concerning safety regulations Standardization - Part 13: Adoption of European documents of
wikipedia.org//List_of_DIN_stand 28/115

DIN 820-2

DIN 820-3

DIN 820-4

DIN 820-11

DIN 820-12

9/29/2011

List of DIN standards - Wikipedia, th

DIN 820-13

CEN, CENELEC and of ETSI; Concepts and presentation

Active

DIN 820-15

Standardization - Part 15: Implementation of ISO and Active IEC international documents; Concepts and presentation

Standardization - Part 120: Guidelines for the inclusion of DIN 820-120 safety aspects Active in standards (ISO/IEC Guide 51:1999) Technical drawings; Active Folding to filing size Hand Operated Wrenches and Withdrawn DIN ISO 1711-1 Sockets; Technical Specifications

DIN 824

DIN 899

ISO 1711-1

DIN 900 to DIN 999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 908

Hexagon socket screw Active plugs with parallel screw thread Hexagonduty hexagon head screw Active
29/115

DIN 910

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

plugs DIN 911 Hexagon Socket Withdrawn DIN ISO 2936 Screw Keys Hexagon socket head cap screws (modified version of ISO 4762) Hexagon socket set screws with flat point (ISO 4026 modified) Hexagon socket set screws with cone point (ISO 4029 modified) ISO 2936

DIN 912

Withdrawn

DIN EN ISO 4762, DIN EN ISO 21269

ISO 4762, ISO 21269

DIN 913

Withdrawn DIN EN ISO 4026

ISO 4026

DIN 914

Withdrawn DIN EN ISO 4027

ISO 4027

DIN 915

Hexagon socket set Withdrawn DIN EN ISO 4028 screws with full dog point Hexagon socket set screws with cup point (ISO 4029 modified)

ISO 4028

DIN 916

Withdrawn DIN EN ISO 4029

ISO 4029

DIN 918

Fasteners; Terminology; Active Spelling of terms; Abbreviations Overview of European Active Standards for fasteners Technical Drawings; Wood Processing; Principles

DIN 918-3

DIN 919-1

Active

wikipedia.org//List_of_DIN_stand

30/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 921

Slotted pan head screws Active with large head Slotted pan head screws Active with shoulder Hexagon weld nuts Active

DIN 923

DIN 929

DIN 930

Fine thread pitch partially Withdrawn DIN 931-1, DIN 931-2 threaded screws M1,6 to M39 Hexagon Cap Screws Partially Withdrawn DIN EN ISO 4014 Threaded Product grades A and B M42 to M160x6 Hexagon Cap Screws Withdrawn DIN EN ISO 4014 Partially Threaded Product grade B M1,6 to M52 Hexagon Cap Screws Fully Threaded - Withdrawn DIN EN ISO 4017 Product grades A and B Hexagon nuts with metric coarse and DIN EN ISO 4032, fine pitch Withdrawn DIN EN ISO 8673 thread Product classes A and B Hexagon

DIN 931-1

ISO 4014

DIN 931-2

ISO 4014

DIN 933

ISO 4017

DIN 934

ISO 4032, ISO 8673

wikipedia.org//List_of_DIN_stand

31/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 935-1

slotted nuts and castle nuts with metric coarse Active and fine pitch thread Product grades A and B M42 to M160x6 hexagon head Active bolts; product grade B Hexagon slotted nuts with metric coarse pitch thread Product grade C

DIN 935-2

DIN 935-3

Active

DIN 936

M8 to M52 and M8x1 to M52x3 hexagon thin Withdrawn nuts; product grades A and B Hexagon thin Withdrawn castle nuts Studs with a length of engagement equal to about 1 d

DIN 937

DIN 938

Active

DIN 939

Studs with a length of engagement Active equal to about 1,25 d Determination of coefficient of friction of bolt/nut Withdrawn DIN EN ISO 16047 assemblies under

DIN 946

ISO 16047
32/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 960

specified conditions M8x1 to M100x4 hexagon head DIN EN ISO 8765, bolts with fine Withdrawn DIN EN ISO 8676 pitch thread Product grades A and B M8x1 to M52x3 hexagon head bolts with fine Withdrawn DIN EN ISO 8676 pitch thread Product grades A and B Designation system for fasteners Active

ISO 8765, ISO 8676

DIN 961

ISO 8676

DIN 962

DIN 963

Slotted countersunk head screws (with countersunk Withdrawn DIN EN ISO 2009 heads as specified in ISO 20091972) Slotted raised countersunk Withdrawn DIN EN ISO 2010 oval head screws Cross recessed countersunk flat head screws

ISO 2009

DIN 964

ISO 2010

DIN 965

Withdrawn

DIN EN ISO 7046-1, DIN EN ISO 7046-2

ISO 7046-1, ISO 7046-2

DIN 966

Cross recessed Withdrawn DIN EN ISO 7047 raised countersunk head screws Hexagon nuts; Style 1;

ISO 7047

wikipedia.org//List_of_DIN_stand

33/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 970

DIN 971-1

Metric coarse thread, Withdrawn DIN EN ISO 4032 Product grades A and B; ISO 4032 modified Style 1 hexagon nuts with metric fine pitch Withdrawn DIN EN ISO 8673 thread; property classes 6 and 8 Style 2 hexagon nuts with metric fine pitch Withdrawn DIN EN ISO 8674 thread; property classes 10 and 12 M5 to M39 hexagon nuts; style 1; product Withdrawn DIN EN ISO 4034 grade C (modified version of ISO 4034) Threaded rods Withdrawn

ISO 4032

ISO 8673

DIN 971-2

ISO 8674

DIN 972

ISO 4034

DIN 975 DIN 976-1

Metric thread Active stud bolts Metric interferenceActive fit thread stud bolts Hexagon weld nuts with flange Hexagon thin slotted nuts and castle nuts with metric coarse Withdrawn DIN EN ISO 21670 ISO 21670

DIN 976-2

DIN 977

DIN 979

Active
34/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 980

and fine pitch thread Product grades A and B All-metal DIN EN ISO 7042, prevailing Withdrawn DIN EN ISO 10513 torque type hexagon nuts Locknuts for use with Active rolling bearings Prevailing torque type DIN EN ISO 7040, hexagon nuts Withdrawn DIN EN ISO 10512 with nonmetallic insert Retaining rings with lugs for use on Active shafts (external circlips) Prevailing torque type hexagon thin Withdrawn DIN EN ISO 10511 nuts with nonmetallic insert Shim rings and supporting rings

ISO 7042, ISO 10513

DIN 981

DIN 982

ISO 7040, ISO 10512

DIN 983

DIN 985

ISO 10511

DIN 988

Active

DIN 1000 to DIN 9999


DIN 1000 to DIN 1999
DIN TITLE Hot rolled Isections - Part 1: Narrow flange Iwikipedia.org//List_of_DIN_stand 35/115

STATUS DIN REPLACEMENT

OTHER ORG REPLACEMENT

9/29/2011

List of DIN standards - Wikipedia, th

DIN 1025-1

sections, I-serie Active - Dimensions, masses, sectional properties Hot rolled Ibeams - Part 2: Wide flange Ibeams, IPBActive serie; dimensions, masses, sectional properties Hot rolled Ibeams; wide flange I-beams, light pattern, Active IPBl-serie; dimensions, masses, sectional properties Hot rolled Ibeams; wide flange I-beams heavy pattern, Active IPBv-serie; dimensions, masses, sectional properties Hot rolled Ibeams; medium flange I-beams, IPE-serie; Active dimensions, masses, sectional properties Units - Part 1: Names and Symbols Units - Part 2: Submultiples and Multiples Active

DIN 1025-2

DIN 1025-3

DIN 1025-4

DIN 1025-5

DIN 1301-1

DIN 1301-2

Active
36/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 1301-3

for General Use Units - Part 3: Conversions of Units No Active Longer To Be Used General Mathematical Symbols and Concepts Vectors, matrices, tensors; symbols and concepts

DIN 1302

Active

DIN 1303

Active

DIN 1304-1

Letter symbols for physical quantities - Part Active 1: Symbols for general use Letter symbols for physical quantities - Part 2: Symbols for Active use in meteorology and geophysics Letter symbols for physical quantities - Part 3: Symbols for Active use in electric power engineering Letter symbols for physical quantities - Part Active 5: Symbols for use in fluid mechanics Letter symbols for physical quantities - Part 9: Symbols for use in the field Active of static
37/115

DIN 1304-2

DIN 1304-3

DIN 1304-5

DIN 1304-8

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

converters using semiconductor devices Letter symbols for physical quantities - Part 9: Symbols for Active equivalent circuits of piezoelectric crystals (Mechanical) vibrations, oscillations and vibration Active systems - Part 1: Basic concepts, survey (Mechanical) vibrations, oscillations and vibration systems - Part Active 2: Linear vibration systems with single degree of freedom (Mechanical) vibrations, oscillations and vibration systems - Part 3: Linear timeActive invariant vibration systems with a finite number of degrees of freedom Vibration; Vibrating Continua, Waves

DIN 1304-9

DIN 1311-1

DIN 1311-2

DIN 1311-3

DIN 1311-4

Active

wikipedia.org//List_of_DIN_stand

38/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 1313

DIN 1315 DIN 1318

Physical Quantities and Equation; Concepts, Methods of Writing Angle; Concepts, Units

Active

Active

Loudness Level Active Fundamentals of Metrology Active Part 1: Basic Terminology Basic Concepts in Metrology Part 2: Active Terminology Related To Measuring Equipment Basic Concepts in Metrology Part 3: Terminology Relating To the Uncertainty of Measurement Active and the Assessment of Measuring Instruments and Measuring Equipment Basic Concepts in Metrology Part 4: Treatment of Active Uncertainties in the Evaluation of Measurements Acoustics; Terminology Active

DIN 1319-1

DIN 1319-2

DIN 1319-3

DIN 1319-4

DIN 1320

DIN 1324-1

Electromagnetic Field - Part 1. Active


39/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 1324-2

State Quantities Electromagnetic Field - Part 2. Active Material Quantities Electromagnetic Field - Part 3. Active Electromagnetic Waves Vocabulary for value management, value analysis and functional Active analysis - Part 1: Value analysis and functional analysis Value Management, Value Analysis, Functional Active Analysis Vocabulary Part 2: Value Management Acoustics; Symbols Withdrawn DIN EN ISO 80000-8 ISO 80000-8

DIN 1324-3

DIN 1325-1

DIN 1325-2

DIN 1332 DIN 1333

Presentation of Active Numerical Data Writing and Typesetting of Formulae Active

DIN 1338

DIN 1355-1

Time; Calendar, Numbering of Withdrawn Weeks, Date of Day, (Clock) Time Arrangement and Numbering in Texts; Active Clauses, Paragraphs, Enumerations
40/115

DIN 1421

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 1422-1

Publications in Sciences, Technology, Economy and Administration; Active Presentation of Manuscripts and Typoscripts Publications in Sciences, Technology, Economy and Administration; Active Presentation of Clean Copies for Reprographic Use Publications in Sciences, Technology, Economy and Active Administration; Typographical Presentation Publications in Sciences, Technology, Economy and Administration; Active Presentation of Scientific and Technical Reports Medium type washers for pins Clevis pins without head Withdrawn DIN EN 28738 ISO 8738

DIN 1422-2

DIN 1422-3

DIN 1422-4

DIN 1440

DIN 1443 DIN 1444

Withdrawn DIN EN 22340

ISO 2340 ISO 2341

Clevis pins with Withdrawn DIN EN 22341 head Lettering Linear-Antiqua Active without serifes

DIN 1451-1

wikipedia.org//List_of_DIN_stand

41/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 1451-2

General Typefaces lineal LinearAntiqua; lettering for transportation

Active

DIN 1451-3

Lettering Linear-Antiqua without serifes; Active lettering for printing Typefaces lineal LinearAntiqua; Active stenciled lettering for engraving and other processes Guidelines for the Establishment and Active Development of Thesauri; Monolingual Thesauri Guidelines for the Establishment and Development of Active Thesauri; Multilingual Thesauri Grooved Pins, Full Length Withdrawn DIN EN 8739 Parallelgrooved with Pilot Grooved Pins, Full Length Withdrawn DIN EN 8744 Taper-grooved Grooved Pins, Half Length Withdrawn DIN EN 8745 Taper-grooved Grooved Pins,

DIN 1451-4

DIN 1463-1

DIN 1463-2

DIN 1470

ISO 8739

DIN 1471

ISO 8744

DIN 1472

ISO 8745

wikipedia.org//List_of_DIN_stand

42/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 1473

Full Length Parallelgrooved with Chamfer

Withdrawn DIN EN ISO 8740

ISO 8740

DIN 1474

Grooved Pins, Half Length Withdrawn DIN EN 8741 Reversegrooved Grooved Pins, Third Length Withdrawn DIN EN 8742 Centregrooved Round Head Grooved Pins Withdrawn DIN EN 8746

ISO 8741

DIN 1475

ISO 8742

DIN 1476

ISO 8746

DIN 1477

Countersunk Head Grooved Withdrawn DIN EN 8747 Pins Spring-Type Straight Pins (Roll Pins) Heavy Type Bibliographic references to documents Part 1: Full References to Printed and Published Documents Bibliographic references to documents Part 2: Rules for Citing

ISO 8747

DIN 1481

Withdrawn DIN EN ISO 8752

ISO 8752

DIN 1505-1

Active

DIN 1505-2

Active

DIN 1505-3

Bibliographic references to documents Part 3: Indexes Active of cited documents (bibliographies) Pattern Equipment for Foundries; Withdrawn DIN EN 12890 Production and

DIN 1511

EN 12890
43/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 1530-1

Quality Tools for moulding - Part 1: Ejector pins Active with cylindrical head Tools for moulding - Part Active 2: Shouldered ejector pins Tools for moulding - Part 3: Ejector pins Active with conical head Hexagon Active domed cap nuts Soft Solders; Composition, Technical Delivery Condition

DIN 1530-2

DIN 1530-3

DIN 1587

DIN 1707

Active

DIN EN ISO 9453

ISO 9453

DIN 1712 Part 1

Aluminium and aluminium alloys Unalloyed Withdrawn DIN EN 576 aluminium ingots for remelting Specifications Aluminium; Half-Finished Products Withdrawn DIN EN 573-3

EN 576

DIN 1712 Part 3

EN 573-3

DIN 1783

Strips, Plates and Sheets of Withdrawn DIN EN 485-4 Aluminium and Wrought Seamless Drawn Copper Withdrawn DIN EN 1057 Tubes for Piping Systems Round Rod of Aluminium Withdrawn DIN EN 754-3 (Highest Grade Aluminium)

EN 485-4

DIN 1786

EN 1057

DIN 1798

EN 754-3

wikipedia.org//List_of_DIN_stand

44/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 1804

DIN 1810

Slotted Round Nut for Hook Active Spanner; ISO Metric Fine Thread Hook wrenches Active Round Nut with Set Pin Holes Active Inside; ISO Metric Fine Thread Graphical Representation Withdrawn DIN EN ISO 17659 of Welded, Soldered and Brazed Joints Graphical Representation Withdrawn DIN EN ISO 6947 of Welded, Soldered and Brazed Joints Graphical Representation of Welded, Soldered and Brazed Joints; Active Concepts and Terms for Soldered and Brazed Joints and Seams Symbolic Representation on Drawings of Withdrawn DIN EN 22553 Welded, Soldered and Brazed Joints Construction contract procedures (VOB) - Part A: General provisions relating to the award of construction contracts

DIN 1816

DIN 1912-1

ISO 17659

DIN 1912-2

ISO 6947

DIN 1912-4

DIN 1912-5

ISO 2553

DIN 1960

Active

wikipedia.org//List_of_DIN_stand

45/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 1961

Construction contract procedures (VOB) - Part B: General Active conditions of contract relating to the execution of construction work

DIN 2000 to DIN 2999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 2112

Alphanumeric office machines Alphanumeric keyboards, Withdrawn DIN 2137-6, DIN 2137-10 keyboard arrangement for manually operated typewriters Alphanumeric office machines; alphanumeric keyboards, Withdrawn DIN 2137-6, DIN 2137-10 keyboard arrangement for electromechanical operated typewriters Text and office systems Keyboards Part 1: German keyboard for Active typewriters; key arrangement and allocation
46/115

DIN 2127

DIN 2137-1

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 2137-2

of characters to keys Text and office systems Keyboards Part 2: German keyboard for data and text Active processing; Key arrangement and allocation of graphic characters to keys Text and office systems Keyboards Part 6: German keyboard for data and text Active processing as well as for typewriters; Key arrangement and allocation of functions to keys Text and office systems Keyboards Part 10: German keyboard for data and text Active processing as well as for typewriters; Arrangement of key positions and key distances
47/115

DIN 2137-6

DIN 2137-10

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 2137-11

Text and office systems Keyboards Part 11: German keyboard for data and text processing as well as for typewriters; Active Principles governing the allocation of characters or functions to keys and the placement of their symbols on the keys Text and office systems Keyboards Part 12: German keyboard for Active data and text processing; Key arrangement and allocation for portable computers Vocabulary of terminology; Active basic concepts Seamless precision steel tubes Part 1: Dimensions Seamless precision steel tubes -

DIN 2137-12

DIN 2342-1

DIN 2391-1

Canceled

DIN EN 10305-1

EN 10305-1

wikipedia.org//List_of_DIN_stand

48/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 2391-2

Part 2: Technical delivery conditions

Canceled

DIN EN 10305-1

EN 10305-1

DIN 2448

Seamless Steel Pipes and Tubes Dimensions, Canceled Conventional Masses per Unit Length

DIN EN 10220

EN 10220

DIN 2527

Blank flanges - Nominal Withdrawn DIN EN 1092-1 pressure 6 to 100 Capillary Fittings; Bends 180 of Copper

EN 1092-1

DIN 2860

Withdrawn

DIN 2999-1

Pipe threads for tubes and fittings; parallel Withdrawn DIN EN 10226-1 internal thread and taper external thread; tread dimensions Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Internal Thread and Withdrawn DIN EN 10226-3 Conical External Thread, Gauging System and Use of Gauges Whitworth Pipe Threads for Tubes Withdrawn DIN EN 10226-3 and Fittings;

EN 10226-1

DIN 2999-2

EN 10226-3

DIN 2999-3

EN 10226-3
49/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 2999-4

Gauge Dimensions Pipe threads for tubes and fittings; sizes for taper screw limit Withdrawn DIN EN 10226-3 plug gauges for parallel internal thread Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Screw Limit Withdrawn DIN EN 10226-3 Ring Gauges for Gauging Conical External Threads, Sizes Whitworth Pipe Threads for Tubes and Fittings; Withdrawn DIN EN 10226-3 Conical Screw Check Plugs, Sizes

EN 10226-3

DIN 2999-5

EN 10226-3

DIN 2999-6

EN 10226-3

DIN 4000 to DIN 4999


DIN TITLE Water engineering, terms - Part 1: Dam plants Water engineering, terms - Part 2: Waterpower plants STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 4048-1

Active

DIN 4048-2

Active

DIN 4054

Correction of Active waterways, terms


50/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 4094-1

DIN 4102-1

Subsoil, Field Active investigations Part 1: Cone penetration tests Fire behaviour of building materials and elements Part 1: Active Classification of building materials - Requirements and testing Fire Behaviour of Building Materials and Building Components Active Part 2: Building Components; Definitions, Requirements and Tests Fire Behaviour of Building Materials and Building Components Part 3: Fire Walls Active and Non-loadbearing External Walls; Definitions, Requirements and Tests Fire behaviour of building materials and elements Part 4: Overview Active and design of classified building materials, elements and components Fire Behaviour of Building Materials and Building Components -

DIN 4102-2

DIN 4102-3

DIN 4102-4

wikipedia.org//List_of_DIN_stand

51/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 4102-5

Part 5: Fire Barriers, Barriers Active in Lift Wells and Glazings Resistant against Fire; Definitions, Requirements and Tests Fire Behaviour of Building Materials and Building Components Active Part 6: Ventilation Ducts; Definitions, Requirements and Tests Fire behaviour of building materials and elements Part 7: Roofing - Active Concepts, requirements and testing Fire behaviour of building materials and components Active - Part 8: Small scale test furnace Fire behaviour of building materials and elements Part 9: seals for Active cable penetrations; concepts, requirements and testing Fire behaviour of building materials and building components Part 10: pipe encasements, pipe bushings,

DIN 4102-6

DIN 4102-7

DIN 4102-8

DIN 4102-9

wikipedia.org//List_of_DIN_stand

52/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 4102-11 service shafts and Active ducts, and barriers across inspection openings; terminology, requirements and testing Fire behaviour of building materials and elements Part 12: Fire resistance of Active DIN 4102-12 electric cable systems required to maintain circuit integrity Requirements and testing Fire behaviour of building materials and elements Part 13: Fire Active DIN 4102-13 resistant glazing; concepts, requirements and testing Fire behaviour of building materials and elements Part 14: Determination of Active DIN 4102-14 the burning behaviour of floor covering systems using a radiant heat source Fire behaviour of building materials Active DIN 4102-15 and elements Part 15: "Brandschacht" Fire behaviour of building materials and elements Active DIN 4102-16 Part 16:
wikipedia.org//List_of_DIN_stand 53/115

9/29/2011

List of DIN standards - Wikipedia, th

"Brandschacht" tests Fire behaviour of building materials and elements Part 17: determination of melting point of Active DIN 4102-17 mineral fibre insulating materials; concepts, requirements and testing Fire behaviour of building materials and components - Part 18: fire Active DIN 4102-18 barriers, verification of automatic closure (continuous performance test) Fire behaviour of building materials and building components Part 22: Active DIN 4102-22 Application standard for DIN 4102-4 based on the design of partial safety factors Thermal protection and energy economy Active in buildings - Part 1: Quantities and units Thermal protection and energy economy in buildings - Part Active 2: Minimum requirements to
54/115

DIN 4108-1

DIN 4108-2

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 4108-3

thermal insulation Thermal protection and energy economy in buildings - Part 3: Protection against moisture Active subject to climate conditions; Requirements and directions for design and construction Thermal insulation and energy economy of buildings Part 7: Airtightness of Active building, requirements, recommendations and examples for planning and performance

DIN 4108-7

Thermal insulation and energy economy in buildings - Part 10: ApplicationActive DIN 4108-10 related requirements for thermal insulation materials Factory made products Structural vibration - Part 1: Active Prediction of vibration parameters Structural vibration - Part 2: Human exposure Active to vibration in buildings Structural
wikipedia.org//List_of_DIN_stand 55/115

DIN 4150-1

DIN 4150-2

9/29/2011

List of DIN standards - Wikipedia, th

DIN 4150-3

DIN 4420-1

vibration - Part 3: Active Effects of vibration on structures Service and working scaffolds - Part 1: Service scaffolds Active Performance requirements, general design, structural design Photographic sensitometry, determination of DIN 4512-1:1971-04, DIN optical density: 4512-3:1973-01, DIN "Photographische Withdrawn 4512-4:1977-06, DIN Sensitometrie, 4512-5:1977-10, DIN Bestimmung der 4512-6:1980-07 optischen Dichte" (1934-01, 195711, 1961-10) Photographic sensitometry, determination of the speed of black and white Withdrawn negative materials (2000-09) DIN ISO 6:1996-02 for pictorial photography (1971-04, 199305) Photographic sensitometry, DIN 4512-7:1993-01, DIN determination of Withdrawn 4512-8:1993-01, DIN diffuse 4512-9:1993-01 transmission density (197301) Photographic sensitometry; determination of Withdrawn DIN ISO 2240:1998-06 the speed of (2002-06) colour reversal films (1977-06, 1985-08)

DIN 4512

DIN 4512-1

ISO 6

DIN 4512-3

DIN 4512-4

ISO 2240

wikipedia.org//List_of_DIN_stand

56/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 4512-5

DIN 4512-6

Photographic sensitometry; determination of Withdrawn DIN ISO 5800:1998-06 (2002-06) the speed of colour negative films (1977-10, 1990-11) Photographic sensitometry; sensitometric Withdrawn illuminants and light sources (1980-07) Photographic sensitometry, determination of optical density; Active concepts, symbols and notations (199301) Photographic sensitometry, determination of optical density; geometric Active conditions for transmission density (199301) Photographic sensitometry, determination of optical density; Active spectral conditions (1993-01)

ISO 5800

DIN 4512-7

DIN 4512-8

DIN 4512-9

Photographic sensitometry, determination of optical density; Active DIN 4512-10 geometric conditions for reflection density (1993-01) Energy efficiency of heating and
wikipedia.org//List_of_DIN_stand 57/115

9/29/2011

List of DIN standards - Wikipedia, th

ventilation systems in DIN V 4701buildings - Part 10 10: Heating, domestic hot water supply, ventilation

Active

Energetic evaluation of heating and ventilation DIN V 4701- systems in Active existing buildings 12 - Part 12: Heat generation and domestic hot water generation Statistics on German meteorological data for calculating the Active energy requirements for heating and air conditioning equipment

DIN 4710

DIN 5000 to DIN 5999


DIN DIN 5008 TITLE Rules for text presentation STATUS DIN REPLACEMENT Active OTHER ORG REPLACEMENT

DIN 5031-1

Physics of radiation in the field of optics and illuminating engineering - Part Active 1: Quantities, symbols and units of radiation physics Physics of radiation in the field of optics and illuminating

wikipedia.org//List_of_DIN_stand

58/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 5031-2

engineering - Part Active 2: Evaluation of radiation by different detectors Physics of radiation in the field of optics and illuminating engineering - Part Active 3: Quantities, symbols and units of illuminating engineering Physics of radiation in the field of optics Active and illuminating engineering - Part 4: Efficiencies Physics of radiation in the field of optics and illuminating Active engineering - Part 5: Definitions for temperatures Physics of radiation in the field of optics and illuminating Active engineering - Part 6: Pupil intensity as a measure of retinal illumination Physics of radiation in the field of optics and illuminating Active engineering - Part 7: Terms for wavebands Physics of radiation in the field of optics and illuminating

DIN 5031-3

DIN 5031-4

DIN 5031-5

DIN 5031-6

DIN 5031-7

DIN 5031-8

Active
59/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 5031-9

engineering - Part 8: Definitions and constants of radiation physics Physics of radiation in the field of optics and illuminating Active engineering - Part 9: Definitions in the field of luminescence

Physics of radiation in the field of optics and illuminating engineering - Part 10: Active DIN 5031-10 Photobiologically effective radiation, quantities, symbols and actions Artificial lighting Part 3: Lighting Active of health care premises Artificial lighting Part 6: Active Measurement and evaluation Artificial lighting Part 7: Lighting of interiors with Active visual displays work stations Artificial lighting Part 8: Workplace Active luminaries Requirements, recommendations and proofing Plane irons for wood smooth and for planes Active
60/115

DIN 5035-3

DIN 5035-6

DIN 5035-7

DIN 5035-8

DIN 5145

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 5146

Curved irons for Active jack planes Lockwashers and locking plates for use with rolling bearings Splined joints, calculation of load capacity Part 1: general basis Logic and set theory; symbols and concepts Signs in mathematical logic Complex quantities; nomenclature

DIN 5406

Active

DIN 5466-1

Active

DIN 5473

Active

DIN 5474

Withdrawn DIN 5473

DIN 5475-1

Withdrawn DIN 5483-3

DIN 5483-1

Time-dependent quantities - Part Active 1: Terms for the time-dependency Time-dependent quantities - Part Active 2: Letter symbols Time-dependent quantities - Part 3: Complex representation of Active sinusoidal timedependent quantities Notation of matrices Withdrawn DIN 1303

DIN 5483-2

DIN 5483-3

DIN 5486

DIN 5487

Fourier-, Laplace- and Ztransformation; Active symbols and concepts Directions and signs in electrical

wikipedia.org//List_of_DIN_stand

61/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 5489

engineering; rules for electric and Withdrawn DIN EN 60375 magnetic circuits, equivalent circuit diagrams Logarithmic quantities and units - Part 2: Logarithmic ratios, levels in nepers and decibels

EN 60375

DIN 5493-2

Active

DIN 6000 to DIN 6999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 6319

Spherical washers Active and conical seats Parallel Pins, Hardened; Withdrawn DIN EN ISO 8734 Tolerance Zone m6 Washers for clamping devices Paper and paper board Lifespan classes Technical drawings, labeling Toothed lock washers Serrated lock washers Lock

DIN 6325

ISO 8734

DIN 6340

Active

DIN 6738

Active

DIN 6776

Withdrawn DIN EN ISO 3098

ISO 3098

DIN 6797

Withdrawn

DIN 6798

Withdrawn

wikipedia.org//List_of_DIN_stand

62/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 6799

DIN 6880

washers Active (retaining washers) for shafts Bright Key Steel; Dimensions, Active Permissible Variations, Weights Drive Type Fastenings without Taper Action Active Part 1: Parallel Keys, Keyways, Deep Pattern Drive Type Fastenings without Taper Action Part 2: Parallel Keys, Active Keyways, Deep Pattern for Machine Tools, Dimensions and Application Drive Type Fastenings without Taper Action Part 3: Active Parallel Keys, Shallow Pattern, Dimensions
63/115

DIN 6885-1

DIN 6885-2

DIN 6885-3

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 6900

and Application Screw and Washer Withdrawn DIN EN 10644 Assemblies Tapping screw and Withdrawn DIN EN 10510 washer assemblies Plain washers for screw and Withdrawn DIN EN 10673 washer assemblies Plain washers for tapping Withdrawn DIN EN 10669 screw and washer assemblies Hexagon socket thin Active head cap screws with pilot recess Highstrength hexagon head bolts with large Withdrawn DIN EN 14399-4 widths across flats for structural steel bolting Round washers for highWithdrawn strength structural steel bolting Hexagon Withdrawn DIN EN 1665 flange bolts Hexagon flange bolts

EN 10644

DIN 6901

EN 10510

DIN 6902

EN 10673

DIN 6903

EN 10669

DIN 6912

DIN 6914

EN 14399-4

DIN 6916

DIN 6921

EN 1665

wikipedia.org//List_of_DIN_stand

64/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 6922

DIN 6923

with reduced shank Hexagon nuts with flange

Withdrawn DIN EN 1665

EN 1665

Withdrawn DIN EN 1661

EN 1661

DIN 6924

Prevailing torque type hexagon DIN EN ISO 7040, Withdrawn nuts with DIN EN ISO 10512 nonmetallic insert Prevailing torque type DIN EN ISO 7042, Withdrawn all-metal DIN EN ISO 10513 hexagon nuts

ISO 7040, ISO 10512

DIN 6925

ISO 7042, ISO 10513

DIN 6926

Prevailing torque type hexagon ISO 7043 (modified), ISO nuts with Withdrawn DIN EN 1663, DIN EN 1666 12125 (modified) flange and with nonmetallic insert Prevailing torque type ISO 7044 (modified), Withdrawn DIN EN 1664, DIN EN 1667 all-metal ISO 12126 (modified) nuts with flange

DIN 6927

DIN 7000 to DIN 7999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 7045

Pan head screws with type H or type Z cross Active recess product grade A Saw blades for web Active saws DIN EN ISO 14589, DIN EN

DIN 7245

wikipedia.org//List_of_DIN_stand

65/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 7337

Break mandrel blind rivets

ISO 15977, DIN EN ISO 15978, DIN EN ISO 15979, DIN EN ISO 15980, DIN EN Withdrawn ISO 15981, DIN EN ISO 15982, DIN EN ISO 15983, DIN EN ISO 15984, DIN EN ISO 16582, DIN EN ISO 16583, DIN EN ISO 16584

ISO 14589, ISO 15977, ISO 15978, ISO 15979, ISO 15980, ISO 15981, ISO 15982, ISO 15983, ISO 15984, ISO 16582, ISO 16583, ISO 16584

DIN 7343

Spiral Pins; Normal Withdrawn DIN EN ISO 8750 Type Spiral Pins; Heavy Duty Withdrawn DIN EN ISO 8748 Type Spring-Type Straight Pins; (Roll Withdrawn DIN EN ISO 13337 Pins) Lightweight Type Plain Washers for Bolts with Active Heavy Clamping Sleeves Thread rolling screws for metric ISO Withdrawn thread - Part 1: Types, designation, requirements Thread rolling screws for ISO metric thread; guideline values for hole diameters

ISO 8750

DIN 7344

ISO 8748

DIN 7346

ISO 13337

DIN 7349

DIN 7500-1

ISO 7085

DIN 7500-2

Active

Withdrawn DIN EN ISO 10666,


wikipedia.org//List_of_DIN_stand 66/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 7504

Self-drilling screws with tapping screw thread Dimensions, requirements and testing

DIN EN ISO ISO 10666, ISO 15480, ISO 15480, 15481, ISO 15482, ISO DIN EN 15483 ISO 15481, DIN EN ISO 15482, DIN EN ISO 15483

DIN 7513

Hexagon head and slotted head thread Active cutting screws Dimensions, requirements and testing Cross recessed head thread cutting Active screws Dimensions, requirements and testing Ring seals Active and gaskets Diving accessories Withdrawn for skin divers; terminology Diving accessories for skin divers; Withdrawn flippers. dimensions. requirements and testing) Diving accessories for skin divers;

DIN 7516

DIN 7603

DIN 7875

DIN 7876

wikipedia.org//List_of_DIN_stand

67/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 7877

Withdrawn diver"s masks. requirements and testing Cross recesses for screws; Withdrawn DIN EN ISO 4757 (modified version of ISO 4757) Threads and thread ends for tapping Withdrawn DIN EN ISO 1478 screws (modified version of ISO 1478) Slotted pan head tapping Withdrawn DIN ISO 1481 screws Slotted countersunk Withdrawn DIN ISO 1482 head tapping screws Slotted raised countersunk Withdrawn DIN ISO 1483 head tapping screws Taper Pins with Thread Ends and Withdrawn DIN EN 28737 Constant Point Lengths Taper Pins with Internal Withdrawn DIN EN 28737 Thread Parallel Pins DIN EN ISO 8733, with Internal Withdrawn DIN EN ISO 8735 Thread Spring lock washers with square Withdrawn ends for
68/115

DIN 7962

ISO 4757

DIN 7970

ISO 1478

DIN 7971

ISO 1481

DIN 7972

ISO 1482

DIN 7973

ISO 1483

DIN 7977

ISO 8737

DIN 7978

ISO 8736

DIN 7979

ISO 8733, ISO 8735

DIN 7980

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 7981

cheese head screws Cross recessed pan head Withdrawn DIN ISO 7049 tapping screws Cross recessed countersunk Withdrawn DIN ISO 7050 head tapping screws Countersunk (Flat) Head Tapping Withdrawn DIN ISO 7051 Screws with Cross Recess Hexagon socket thin head cap screws

ISO 7049

DIN 7982

ISO 7050

DIN 7983

ISO 7051

DIN 7984

Active

DIN 7985

Cross recessed Withdrawn DIN EN ISO 7045 raised cheese head screws Hexagon socket countersunk Withdrawn DIN EN ISO 10642 head cap screws

ISO 7045

DIN 7991

ISO 10642

DIN 8000 to DIN 8999


DIN TITLE Polyethylene (PE) pipes Dimensions STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 8074

Active

DIN 8075

Polyethylene (PE) pipes PE 63, PE 80, PE 100, PEHD - General Active quality
69/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

requirements, testing Brazing and Braze Weld Filler Metals; Copper Base Brazing Withdrawn DIN EN 1044 Alloys; Composition, Use, Technical Conditions of Delivery Brazing and Braze Weld Filler Metals; Silver-bearing Brazing Alloys with less than 20% by wt. Withdrawn DIN EN 1044 Silver; Composition, Use, Technical Conditions of Delivery Brazing filler metals; silver brazing filler metals containing not less than 20 % Withdrawn DIN EN 1044 of silver; composition, application, technical delivery conditions Brazing and Braze Weld Filler Metals; AluminiumBase Brazing Alloys; Withdrawn DIN EN 1044 Composition, Use,

DIN 8513-1

EN 1044

DIN 8513-2

EN 1044

DIN 8513-3

EN 1044

DIN 8513-4

EN 1044

wikipedia.org//List_of_DIN_stand

70/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 8513-5

Technical Conditions of Delivery Brazing filler metals; Nickel base filler metals for high temperature Withdrawn DIN EN 1044 brazing; Application, composition, technical delivery conditions Manufacturing processes Active Terms and definitions, division Narrow band saw blades for Active woodworking; dimensions

EN 1044

DIN 8580

DIN 8806-1

DIN 9000 to DIN 9999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 9021

Plain washers DIN EN ISO 7093-1, DIN EN with ISO 7093-1, ISO 7093-2 Withdrawn ISO 7093-2 large outside diameter

DIN 10000 to DIN 19999


DIN 10000 to DIN 10999
DIN TITLE STATUS Food hygiene - Lamps for the lighting Withdrawn of meat
71/115

DIN REPLACEMENT

OTHER ORG REPLACEMENT

DIN 10504

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

and meat products

DIN 11000 to DIN 11999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 11850

Tubes for the food, chemical and pharmaceutical Active industry Stainless steel tubes Dimensions, materials

DIN 12000 to DIN 12999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

Laboratory furniture; safety cabinets for microbiological Withdrawn DIN 12950-1 and biotechnological work; safety requirements, tests Laboratory furniture; safety cabinets for microbiological and biotechnological Withdrawn DIN 12950-2 work; containment of class 1 and class 2 cabinets, microbiological test Laboratory furniture; safety
wikipedia.org//List_of_DIN_stand 72/115

9/29/2011

List of DIN standards - Wikipedia, th

cabinets for microbiological DIN 12950- and biotechnological Withdrawn 10 and biotechnological work; requirements and testing Thermal solar systems and components DIN 12975-1 Solar collectors - Part 1: General requirements Thermal solar systems and components DIN 12975-2 Solar collectors - Part 2: Test methods Thermal solar systems and components DIN 12976-1 Factory made systems - Part 1: General requirements Thermal solar systems and components DIN 12976-2 Factory made systems - Part 2: Test methods

DIN 13000 to DIN 13999


DIN TITLE Division of hospitals into functional areas and functional sections STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 13080

Active

wikipedia.org//List_of_DIN_stand

73/115

9/29/2011

List of DIN standards - Wikipedia, th

Supply systems for medical gases - Part 2: Dimensions and allocation of probes and Active DIN 13260-2 gas-specific connection points for terminal units for compressed medical gases and vacuum Packaging Requirements for packaging recoverable through composting and Active biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging Workpiece cornes and edges Active

DIN 13432

DIN EN 13432

DIN 13715

DIN ISO 13715(200012)

DIN 14000 to DIN 14999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 14090

Areas for the fire brigade Active on premises Fire precaution regulation Part 1: General and Active part A (placard);
74/115

DIN 14096-1

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 14096-2

rules for drafting and placarding Fire precaution regulation Part 2: Part B (for persons without Active special tasks of fire prevention and fire fighting); rules for drafting Fire precaution regulation Part 3: Part C (for persons with special tasks Active of fire prevention and fire fighting); rules for drafting Water pool for firefighting Active

DIN 14096-3

DIN 14210

DIN 14406-4

Portable fire extinguishers Active - Part 4: Maintenance Trailers for firefighting purposes, Withdrawn DIN 14521 twowheeled; general requirements Firefighting and rescue service

DIN 14503

wikipedia.org//List_of_DIN_stand

75/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 14505

vehicles Vehicles for Active roller containers General requirements Rescue service vehicles Vehicles for Active roller containers General requirements Trailers for portable fire Withdrawn pumps Firefighting Trailer with Active removable foam-water monitor Fire fighting vehicles Part 5: Group pumping appliance LF Active 10/6, Group pumping appliance for rescue operations HLF 10/6

DIN 14507

DIN 14520

DIN 14521

DIN 14530-5

Fire fighting vehicles Part 11: Group pumping appliance LF Active DIN 14530-11 20/16, Group pumping appliance for rescue operations HLF 20/16
wikipedia.org//List_of_DIN_stand 76/115

9/29/2011

List of DIN standards - Wikipedia, th

Fire fighting vehicles Part 16: DIN 14530-16 Pumping appliance TSF Fire fighting vehicles Part 17: DIN 14530-17 Pumping appliance TSF-W

Active

Active

Fire fighting vehicles Part 21: Pump water DIN 14530-21 tanker TLF Active 20/40, Pump water tanker TLF 20/40SL Fire fighting vehicles Active DIN 14530-22 Part 22: TLF 16/24-TR Fire fighting vehicles Part 24: DIN 14530-24 Small pumping appliance KLF Fire fighting vehicles Part 25: DIN 14530-25 Pumping appliance STLF 10/6

Active

Active

DIN 14555-1

Vehicles carrying tools and gears Active Part 1: General requirements Vehicles carrying tools

wikipedia.org//List_of_DIN_stand

77/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 14555-3 and gears - Active Part 3: Emergency tender RW Vehicles carrying tools and gears Part 12: Active DIN 14555-12 Damage control tender GWG Vehicles carrying tools and gears Active DIN 14555-21 Part 21: GW-L1 for logistic tasks Vehicles carrying tools and gears Active DIN 14555-22 Part 22: GW-L2 for logistic tasks Fire hose tender; Type Withdrawn SW 2000TR Turntable ladders and similar fire fighting vehicles; Withdrawn DIN EN 1777 Purpose, concepts, safety equipment, requirements Turntable ladders and similar fire DIN EN 14043, DIN EN fighting Withdrawn 14044 vehicles; Turn table ladders, engine driven

DIN 14565

DIN 14701-1

EN 1777

DIN 14701-2

EN 14043, EN 14044

wikipedia.org//List_of_DIN_stand

78/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 14701-3

DIN 14702

Turntable ladders and similar fire fighting vehicles; Rescue baskets Turntable ladder DL 16-4, hand operating Trailer Ladder AL 16-4

Withdrawn DIN EN 1777

EN 1777

Active

DIN 14703

Active

DIN 14710-1

Hook ladder, manufactured using wood; Withdrawn DIN EN 1147 with hinged hook Hook light metal ladder Withdrawn Scaling ladder; made Withdrawn DIN EN 1147 from wood Scaling ladder; made Withdrawn DIN EN 1147 from light metal Scaling ladder; socket rungs Withdrawn DIN EN 1147 and socket parts Folding ladder Withdrawn DIN EN 1147

EN 1147

DIN 14710-3

DIN 14711-1

EN 1147

DIN 14711-2

EN 1147

DIN 14711-3

EN 1147

DIN 14713

EN 1147

DIN 14715-1

Three piece extension Withdrawn DIN EN 1147 ladder made from wood Three piece extension Withdrawn DIN EN 1147 ladder; made of light metal

EN 1147

DIN 14715-2

EN 1147

DIN 15000 to DIN 15999


wikipedia.org//List_of_DIN_stand 79/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN

TITLE

STATUS DIN REPLACEMENT

OTHER ORG REPLACEMENT

Cranes; steel structures; Active DIN 15018-2 principles of design and construction Warehouse systems with guided industrial trucks; Active DIN 15185-1 requirements on the ground, the warehouse and other requirements Warehousesystems with powered industrials trucks; code of practice for the protection DIN 15185-2 of persons when Active operating with trucks in narrow aisles; safety requirements, testing DIN 15721 Film 70 mm; projection reel Active

DIN 16000 to DIN 16999


DIN DIN 16518 TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

Classification Active of types Cross-linked high-density polyethylene (PE-X) Active pipes General quality requirements and testing Cross-linked high-density polyethylene

DIN 16892

wikipedia.org//List_of_DIN_stand

80/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 16893

(PE-X) pipes Dimensions

Active

DIN 17000 to DIN 17999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 17410

Materials for permanent Active magnets: Technical conditions Resistance Active alloys

DIN 17471

DIN 18000 to DIN 18999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 18012

House service connections Active facilities Principles for planning Recesses for meter boards Active (electric meters) Foundation earth electrode General planning criteria

DIN 18013

DIN 18014

Active

DIN 18015-1

Electrical installations in residential Active buildings Part 1: Planning principles Electrical

wikipedia.org//List_of_DIN_stand

81/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 18015-2

installations in residential buildings Active Part 2: Nature and extent of minimum equipment Electrical installations in residential buildings Active Part 3: Wiring and disposition of electrical equipment Domestic kitchens, bathrooms and WCs; design principles

DIN 18015-3

DIN 18022

Withdrawn

DIN 18024-1

Barrier-free built environment - Part 1: Streets, squares, paths, public Active transport, recreation areas and playgrounds - Design principles Construction of accessible buildings Part 2: Publicly Active accessible buildings and workplaces, design principles Stairs in
82/115

DIN 18024-2

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 18065

buildings Terminology, Active measuring rules, main dimensions Construction contract procedures (VOB) Part C: General technical specifications Active in construction contracts (ATV) Installation of air conditioning systems Contract procedures for building works - Part C: General technical specifications for building works; LowActive voltage installation and mediumvoltage installation with nominal voltages up to including 36 kV Construction contract procedures (VOB) Part C: General technical specifications

DIN 18379

DIN 18382

wikipedia.org//List_of_DIN_stand

83/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 18384

DIN 18800-1

Active in construction contracts (ATV); Installation of lightning protection systems Steel structures Withdrawn DIN EN 1993 Part 1: DIN EN 1090 Design and construction Steel structures Part 2: Analysis of safety against Withdrawn DIN EN 1993 buckling of linear members and frames Steel structures Part 3: Analysis of Withdrawn DIN EN 1993 safety against buckling of plates Steel structures Part 4: Analysis of Withdrawn DIN EN 1993 safety against buckling of shells Steel structures Part 5: Composite structures of Withdrawn DIN EN 1994 steel and concrete Design and construction Steel

DIN 18800-2

DIN 18800-3

DIN 18800-4

DIN 18800-5

wikipedia.org//List_of_DIN_stand

84/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 18800-7

structures Part 7: Active Execution and constructor's qualification

EN 1090-2

DIN 19000 to DIN 19999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN V 19222

Control technology Active Terminology Measurement and control; terminology Active and classification of controllers Control technology Part 1: Active General terms and definitions Control technology Part 2: Terms and Active definitions; dynamic systems behaviour Control technology Part 3: Terms and Active definitions of switching systems behaviour Control technology Part 4: Terms and Active definitions of
85/115

DIN 19225

DIN 19226-1

DIN 19226-2

DIN 19226-3

DIN 19226-4

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

control systems Control technology Part 5: Functional terms

DIN 19226-5

Active

DIN 19226-6

Control technology Part 6: Terms and Active definitions of functional and constructional units Control technology; graphical symbols and identifying letters for Active process control engineering; symbolic representation for functions Control technology; graphical symbols and identifying Active letters for process control engineering; representation of details Measurement and control; DIN 19226-3, DIN 19226-4, Withdrawn control DIN 19226-5, DIN 19226-6 engineering vocabulary Control technology; graphical

DIN 19227-1

DIN 19227-2

DIN 19237

wikipedia.org//List_of_DIN_stand

86/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 19227-1

symbols and identifying letters for Active process control engineering; symbolic representation for functions Control technology; graphical symbols and identifying Active letters for process control engineering; representation of details Pipe-lines of high-density PE (highdensity polyethylene) and lowDIN EN 12201-1, density PE DIN EN 12201-2, (low density Withdrawn DIN EN 12201-3, polyethylene) DIN EN 12201-5 for drinking water supply; pipes, pipe connections and fittings for pipe-lines Hydraulic steel structures Part 1: Criteria for design and calculation

DIN 19227-2

DIN 19533

EN 12201-1, EN 12201-2, EN 12201-3, EN 12201-5

DIN 19704-1

Active

DIN 19704-2

Hydraulic steel structures Active Part 2: Design and


87/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 19704-3

manufacturing Hydraulic steel structures Active Part 3: Electrical equipment

DIN 20000 to DIN 29999


DIN 24000 to DIN 24999
DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 24190

Ventilation and air conditioning - folded Withdrawn and welded rectangular sheet metal ducts Hydraulic valves; mounting surfaces and Active connecting plates for directional control valves

DIN 24340-2

DIN 28000 to DIN 28999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 28610-1

Ductile iron pressure pipes with socket with cementmortar Withdrawn DIN EN 545, DIN EN 969 lining for

EN 545, EN 969
88/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 28610-2

gas and water pipelines; dimensions and masses Ductile iron pressure pipes with socket for gas and water pipelines rated for Withdrawn DIN EN 969 pressures over 4 bar up to and including 16 bar; dimensions and masses

EN 969

DIN 30000 to DIN 39999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 30722-1

Roller contact tipper vehicles, roller containers - Part 1: Roller contact Active tipper vehicles up to 26 t, roller containers type 1570 made from steel Roller

wikipedia.org//List_of_DIN_stand

89/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 30722-2

DIN 30722-3

contact tipper vehicles, roller containers - Part 2: Roller contact Active tipper vehicles up to 32 t, roller containers type 1570 made from steel Roller contact tipper vehicles, roller containers - Part 3: Roller contact Active tipper vehicles up to 12 t, roller containers type 900 made from steel Roller containers for the Active transport on road and rail

DIN 30722-4

DIN 31000 to DIN 31999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 31635

Conversion of the Active Arabic


90/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

alphabet

DIN 40000 to DIN 49999


DIN DIN 40015 TITLE Frequency and wave bands STATUS Active DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 40020

Guidelines for the user interface in multimedia Active equipment for general purpose use (IEC/TR 61997:2001)

Road vehicles; degrees of protection (IPDIN 40050- code); protection against foreign 9 objects; water and contact; electrical equipment Graphical symbols DIN 40101for use on 1 equipment

Active

Withdrawn

Graphical symbols for use on equipment; DIN 40101graphical symbols Active 2 from ISO 7000 for electrical engineering Electric power technology Current systems Concepts, quantities, letter symbols

DIN 40108

Active

Quantities used in DIN 40110- alternating current theory - Part 2: 1 Two-line circuits Quantities used in DIN 40110- alternating current
wikipedia.org//List_of_DIN_stand

Active

91/115

9/29/2011

List of DIN standards - Wikipedia, th

theory - Part 2: Multi-line circuits

Active

Telecommunications DIN 40146Active - Part 1: Basic 1 concepts Transmission DIN 40148- systems and twoActive ports; concepts and 1 quantities Transmission systems and twoDIN 40148ports; symmetry 2 characteristics of linear two-ports

Active

Transmission DIN 40148- systems and twoActive ports; measures for 3 attenuation Nominal value, limiting value, rated Active value, rating concepts Electrical communication engineering; electromagnetic relays, definitions

DIN 40200

DIN 41215

Withdrawn

DIN 41301

Electro Sheets; Magnetic Materials Withdrawn for Transformers

Small transformers and chokes; stripwound cut cores; DIN 41309types SM, SE, SU, Withdrawn 1 SG and S3U; dimensions materials Small transformers and chokes; stripwound cut cores; DIN 41309- technical conditions Withdrawn of delivery for one 2 phase applications; types SM, SE, SU and SG
wikipedia.org//List_of_DIN_stand 92/115

9/29/2011

List of DIN standards - Wikipedia, th

Small transformers and chokes; stripDIN 41309- wound cut cores; Withdrawn 3 technical conditions of delivery for three phase applications; type S3U Nominal values of Withdrawn DIN IEC 60063 DIN 41426 resistors and capacitors DIN 41429 Colour code for fixed resistors Withdrawn DIN EN 60062

IEC 60063

EN 60062

DIN 41524

Circular connectors for radio and associated sound Withdrawn equipment three and five-pole connectors

Two-part connectors for DIN 41612- printed board, grid Withdrawn DIN 41612-1 S1 2,54 mm; common 1 mounting features; survey of types Two piece connectors for DIN 41612printed circuits, grid Withdrawn DIN EN 60603-2 1 S1 2,54 mm (0,1 in); general allusions Two-part connectors for DIN 41612- printed boards; grid Withdrawn DIN EN 60603-2 2,54mm; 2 dimensions of types B, C and D Two part connectors for DIN 41612- printed boards; grid Withdrawn DIN EN 60603-2 2,54mm; 3 dimensions of types F and G Two-part connectors for DIN 41612- printed boards; grid Withdrawn DIN EN 60603-2 2,54mm, 4 dimensions of type
wikipedia.org//List_of_DIN_stand

EN 60603-2

EN 60603-2

EN 60603-2

EN 60603-2

93/115

9/29/2011

List of DIN standards - Wikipedia, th

H Two-part connectors for DIN 41612printed boards; grid Withdrawn DIN EN 60603-2 5 2,54mm; ratings, requirements, tests Two-part connection for DIN 41612- printed boards; grid Withdrawn DIN EN 60603-2 2.54mm; 6 dimensions of types Q, R and S Two-part connectors for DIN 41612- printed boards; grid Withdrawn DIN EN 60603-2 2,54 mm; 7 dimensions of types U and V Two-part connectors for DIN 41612- printed boards; grid Withdrawn DIN EN 60603-2 2.54 mm; 8 dimensions of type M Two-part connectors for printed boards; grid DIN 41612- 2.54 mm; Withdrawn DIN EN 60603-2 dimensions of type 8 S1 M; survey of special contracts for use with type M Two-part connectors for DIN 41612- printed boards; grid Withdrawn DIN EN 60603-2 2,54 mm; 9 dimensions of type E Two-part DIN 41612- connectors for Withdrawn DIN EN 60603-2 printed boards; grid 10 2,54mm; gauges Two-part connectors for DIN 41612Withdrawn DIN 41612-9 printed boards; 102 dimensions for type X
wikipedia.org//List_of_DIN_stand

EN 60603-2

EN 60603-2

EN 60603-2

EN 60603-2

EN 60603-2

EN 60603-2

EN 60603-2

94/115

9/29/2011

List of DIN standards - Wikipedia, th

Two-part connectors for DIN 41612printed boards; 103 dimensions of type M

Withdrawn DIN 41612-8

Rack and panel connectors, trapezoidal, round DIN 41652- contacts 1 mm; Active common mounting 1 features and dimensions; survey of types Rack and panel connectors; DIN 41652- trapezoidal, round contacts 1 mm; 2 ratings, requirements, tests

Active

Rack and panel connectors, trapezoidal, round DIN 41750- contacts 1 mm; Active 1 common mounting features and dimensions; survey of types Rack and panel connectors, DIN 41750- trapezoidal, round contacts 1 mm; 2 ratings, requirements, tests

Active

Rack and panel connectors, trapezoidal, round DIN 41750- contacts 1 mm; Active dimensions of type 3 A; solder termination for free wiring Rack and panel connectors, trapezoidal, round DIN 41750- contacts 1 mm; dimensions of type 5
wikipedia.org//List_of_DIN_stand

Active
95/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 41782

C; crimp termination for free wiring Guidelines for the presentation of Withdrawn DIN IEC 60747-2 published data Thyristors, definitions Semiconductor devices and integrated circuits; kinds of devices and general terms Withdrawn

IEC 60747-2

DIN 41786

DIN 41855

Withdrawn

Semiconductor devices and integrated circuits; DIN 41855optoelectronic 2 semiconductor devices; terms and definitions Cases 10 A 3 and 10 B 3 for semiconductor devices; main dimensions

Withdrawn

DIN 41868

Withdrawn

Case 23 A 3 for DIN 41869- semiconductor devices; main 1 dimensions Cases 34 A 2 and 34 A 3 for DIN 41869semiconductor 2 devices; main dimensions Case 11 A 3 and 11 B 3 for DIN 41869semiconductor 3 devices; main dimensions Case 12 A 3 for DIN 41869- semiconductor devices; main 4 dimensions Case 13 A 3 for DIN 41869- semiconductor
wikipedia.org//List_of_DIN_stand

Withdrawn

Withdrawn

Withdrawn

Withdrawn

Withdrawn
96/115

9/29/2011

List of DIN standards - Wikipedia, th

devices; main dimensions Case 14 A 3 for DIN 41869- semiconductor devices; main 6 dimensions Case type 15 for DIN 41869- semiconductor devices; main 7 dimensions Cases type 5 for semiconductor devices and integrated circuits

Withdrawn

Withdrawn

DIN 41873

Withdrawn

DIN 41876

Cases 18 A, B and C with 2 up to 4 terminals for Withdrawn semiconductor devices; main dimensions Terminal markings for electrical equipment; general Withdrawn DIN EN 60445 rules, alphanumeric system Terminal markings for power transformers and reactors Terminal markings for power converters

DIN 42400

EN 60445

DIN 42402

Active

DIN 42403

Withdrawn DIN IEC 61148

IEC 61148

Totally enclosed fan-cooled threephase induction motors squirrelDIN 42673- cage, type IM B 3, Withdrawn with rolling bearing; 1 mounting dimensions and relationship frame sizes-output ratings Totally enclosed fan-cooled threephase induction motors with
wikipedia.org//List_of_DIN_stand 97/115

9/29/2011

List of DIN standards - Wikipedia, th

squirrel-cage, type DIN 42673- IM B 3, with rolling Active 2 bearings; relationship frame sizes - output ratings for type of protection increased safety "e" Totally enclosed fan-cooled threephase induction motors with squirrel-cage, type IM B 3, with rolling DIN 42673Active bearings; 3 relationship frame sizes - output ratings for type of protection flameproof enclosure "d" Totally-enclosed fan-cooled alternating-current polyphase motors DIN 42673with squirrel-cage, Active 4 design B3, with ball bearings, maximum envelope dimensions DIN 42961 Rating plates for rotating electrical machinery; design Active

DIN 42973

Rated output values for rotating Active electrical machinery for continuous duty Measurement and control Measurement and control instruments Withdrawn DIN IEC 61554 for panel mounting Nominal front- and cut-out-dimensions Electrical measuring instruments; direct acting indicating

DIN 43700

IEC 61554

wikipedia.org//List_of_DIN_stand

98/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 43780

electrical measuring Withdrawn DIN EN 60051-1 instruments and their accessories

EN 60051-1

Line scales and pointers for DIN 43802- indicating electrical Active measuring 2 instruments; general requirements Line scales and pointers for DIN 43802- indicating electrical Active measuring 3 instruments; designs and dimensions Line scales and pointers for indicating electrical DIN 43802Active measuring 4 instruments; scale graduation and numbering Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, Active panel meters and measuring transducers for the measurement of power and power factor Electricity meters, tariff time switches and ripple control receivers; connection diagrams, terminal marking, circuit diagrams

DIN 43807

DIN 43856

Active

Electricity meters Part 2: Marking of DIN 43856- auxiliary terminals for tariff devices 2
wikipedia.org//List_of_DIN_stand

Active
99/115

9/29/2011

List of DIN standards - Wikipedia, th

according to IECReport 61354:1995 Meter mounting DIN 43870- boards; dimensions Active based on a grid 1 system Meter mounting DIN 43870boards; functional 2 area DIN 43870- Meter panels; 3 wirings Active

Active

Meter mounting DIN 44070- boards; dimensions Active based on a grid 1 system Meter mounting DIN 44070boards; functional 2 area DIN 44070- Meter panels; 3 wirings Active

Active

DIN 44070- Meter panels; cover Active 4 for wiring DIN 44080 Thermistors; PTC, technical terms and Withdrawn tests Information processing; vocabulary Withdrawn

DIN 44300

Information DIN 44300- processing Withdrawn Concepts - General 1 terms Information processing DIN 44300Concepts 2 Representation of data Information DIN 44300- processing Concepts - Data 3 structures Information DIN 44300- processing Concepts 4
wikipedia.org//List_of_DIN_stand

Withdrawn

Withdrawn

Withdrawn
100/115

9/29/2011

List of DIN standards - Wikipedia, th

Programming Information processing DIN 44300- Concepts Components of 5 digital computer systems

Withdrawn

Information DIN 44300processing Withdrawn 6 Concepts Storage Information DIN 44300processing 7 Concepts Times Withdrawn

Information DIN 44300- processing Withdrawn Concepts 8 Processing functions Information processing DIN 44300Concepts - Process Withdrawn 9 relations and modes of operation Circular connectors for radio and Withdrawn DIN EN 60130-9 associated sound equipment; six-pole connectors Connectors for coupling an external low-voltage power to portable Active entertainment equipment (describes at least two DC coaxial power plugs)

DIN 45322

EN 60130-9

DIN 45323

High fidelity audio equipment and DIN 45500- systems; minimum performance 1 requirements; Part 1: general High fidelity audio equipment and DIN 45500systems; 2 requirements for
wikipedia.org//List_of_DIN_stand

Withdrawn DIN EN 61305-1

EN 61305-1

Withdrawn DIN EN 61305-2

EN 61305-2
101/115

9/29/2011

List of DIN standards - Wikipedia, th

tuner equipments High fidelity audio equipment and systems; DIN 45500requirements for 3 disk record reproducing equipments

Withdrawn

High fidelity audio equipment and systems; minimum DIN 45500- performance Withdrawn requirements for 4 magnetic recording and reproducing equipment High fidelity audio equipment and DIN 45500- systems; minimum performance 5 requirements for microphones High fidelity audio equipment and DIN 45500- systems; minimum performance 6 requirements for amplifiers High fidelity audio equipment and DIN 45500systems; 7 requirements for loudspeakers High fidelity audio DIN 45500- equipment and systems; for sets 8 and systems High fidelity audio equipment and DIN 45500- systems; minimum performance 10 requirements for headphones Measuring apparatus for frequency variations
wikipedia.org//List_of_DIN_stand 102/115

Withdrawn

Withdrawn DIN EN 61305-3

EN 61305-3

Withdrawn DIN EN 61305-5

EN 61305-5

Withdrawn

Withdrawn

9/29/2011

List of DIN standards - Wikipedia, th

DIN 45507

in sound recording equipment

Withdrawn DIN IEC 60386

IEC 60386

DIN 45539

Disk record reproducing equipment; directives for measurements, markings and audio Withdrawn DIN IEC 60098 frequency connections, dimensions of interchangeable pickups, requirements of play back amplifiers Microphones; phantom powering Withdrawn

IEC 60098

DIN 45596

Steel flats with special magnetic properties cold rolled, non DIN 46400- oriented, finally annealed magnetic 1 sheet and strip hysteresis loss at frequencies above 100 Hz Grain-oriented DIN 46400- magnetic steel and strip technical 3 conditions

Withdrawn DIN EN 10106

EN 10106

Withdrawn DIN EN 10107

EN 10107

DIN 47100

Cords for telecommunication; Withdrawn code of insulated conductors, colour of sheath Active Active

DIN 47301Terms of HF-lines 1 DIN 47301Terms of HF-lines 2

Definition of radio frequency DIN 47301- transmission lines Active mean characteristic 3 impedance - mean
wikipedia.org//List_of_DIN_stand 103/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 48803

standing wave ratio Lightning protection system; Arrangement of Withdrawn components and dimensions for mounting Lightning protection Withdrawn system; Description

DIN 48830

DIN 50000 to DIN 59999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 51097

Testing of floor coverings; determination of the anti-slip Withdrawn DIN 51130 properties: wet-loaded barefoot areas; walking method; ramp test Testing of floor coverings; determination of the anti-slip properties: Withdrawn DIN 51097 workrooms and fields of activities with slip danger, walking method - ramp test Lubricants; Lubricating Withdrawn Oils L-AN; Minimum Requirements Testing of particleboards; determination of Withdrawn DIN EN 717-2

DIN 51130

DIN 51501

DIN 52368

EN 717-2
104/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

formaldehyde emission by gas analysis Paints and varnishes Determination of the drying stage of Active coatings (modified BandowWolff method) Testing of combustible materials; response to ignition by small flame Testing of Plastics; Flexural Test

DIN 53150

DIN 53438

Active

DIN 53452

Withdrawn DIN EN ISO 178

ISO 178

DIN 53575

Flexible Cellular Polymeric Withdrawn DIN EN ISO 8067 Materials Determination of Tear Strength Testing of combustible materials; Active determination of ignition temperature Determination of burning Active behaviour using a gas burner

ISO 8067

DIN 54836

DIN 54837

Machine tools; symbols; Withdrawn DIN 55003-3 numerically controlled machine tools Surgical implants;
wikipedia.org//List_of_DIN_stand 105/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 58810

threads for bone screws and nuts

Withdrawn

DIN 58888

Thread connection for Withdrawn DIN ISO 8038-1 microscope objectives

ISO 8038-1

DIN ISO 53438

DIN 60000 to DIN 69999


DIN TITLE STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 66000

Information processing; switching algebra, Active mathematical signs and symbols Information processing; graphical symbols Active and their application Information processing; handwriting of the Active digit 0 and of the upper case letter O Information technology - 7-bit Active code

DIN 66001

DIN 66002

DIN 66003

Information processing Coding on data media - Part 1: Active DIN 66004-1 Representation of 7-bit code character sets on punched tape 25 Information processing Coding on data
wikipedia.org//List_of_DIN_stand 106/115

9/29/2011

List of DIN standards - Wikipedia, th

media - Part 2: Active DIN 66004-2 Representation of 7-bit coded and 8-bit coded character sets on punched cards Information processing Coding on data media - Part 3: DIN 66004-3 Representation of Active 7-bit coded and 8-bit coded character sets on magnetic tape 12 Information processing Coding on data media - Part 4: Representation of Active DIN 66004-4 7-bit coded and 8-bit coded character sets on magnetic tape cassette 3,8 Information processing Coding on data media - Part 5: DIN 66004-5 Representation of Active 7-bit coded and 8-bit coded set on media-flexible disk cartridge Information processing; representation of packed numerics Active and binary data recorded on 9 tracks on magnetic tape 12 Presentation of ALGOL/ALCOR programs on Withdrawn paper tape and punch cards
107/115

DIN 66005

DIN 66006

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 66007

Font CMC 7 for magnetic ink character Withdrawn DIN ISO 1004 recognition; characters and nominal dimensions

ISO 1004

Font A for optical character recognition; Active DIN 66008-1 characters and nominal dimensions Font A for optical character recognition; characters and Active DIN 66008-6 nominal dimensions; extension of the character set Font A for optical character recognition; DIN 66008-7 representation of Active characters by dots in a 9 9 matrix Font B for optical character Withdrawn recognition; character

DIN 66009

Functional requirements for the interface between data terminal Active DIN 66020-1 equipment and data circuitterminating equipment - Part 1: General application List of definitions for interchange circuits between
wikipedia.org//List_of_DIN_stand 108/115

9/29/2011

List of DIN standards - Wikipedia, th

data terminal DIN 66020-2 equipment (DTE) Active and data circuitterminating equipment (DCE) in public data networks Data transmission; interface between data circuitActive DIN 66020-4 terminating equipment (DCE) and data terminal equipment (DTE) Interface between data terminal equipment (DTE) and data circuitterminating DIN 66020-9 equipment (DCE) Active for synchronous transmission on group band circuits at 48000 bits per second Data transmission; interface between data circuitActive DIN 66021-1 terminating equipment (DCE) and data terminal equipment (DTE) Interface between data terminal equipment (DTE) and data circuitterminating DIN 66021-2 equipment (DCE) Active for synchronous transmission on group band circuits at 48000 bits per second Numerical control of machines, Active DIN 66025-1 format; general
wikipedia.org//List_of_DIN_stand 109/115

9/29/2011

List of DIN standards - Wikipedia, th

requirements Industrial automation; numerical control of machines; Active DIN 66025-2 format, preparatory and miscellaneous functions Information processing; programming language FORTRAN

DIN 66027

Withdrawn

Programming of numerically controlled Active DIN 66215-1 machines; CLDATA, general structure and record types Programming of numerically controlled machines; DIN 66215-2 CLDATA; minor Active elements of type 2000 records (post-processor commands) Information processing; 1998 DIN 66253-2 programming language PEARL Information processing; programming language PL/I Information processing; programming language PL/I Information processing; programming

DIN 66234

Active

DIN 66255

Active

DIN 66256

Withdrawn
110/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

DIN 66257

language Pascal Numerical control of machines; Withdrawn DIN ISO 2806 concepts

ISO 2806

Interfaces and basic data link control procedures for Withdrawn DIN 66258-1 data communication; C S-interface, V Sinterface Interface and basic data link control procedures for data communication; balanced interface Withdrawn DIN 66258-2 for start-stop transmission using basic data link control procedures on point-to-point connection Information processing; NassiActive Shneiderman flowchart symbols

DIN 66261

Industrial automation systems and integration Multiprocessor Active DIN 66264-1 Control System for Industrial Machines (MPST) - Part 1: Parallel bus Multiprocessor control system for industrial machines Active DIN 66264-2 (MPST);
wikipedia.org//List_of_DIN_stand 111/115

9/29/2011

List of DIN standards - Wikipedia, th

DIN 66303

industrial automatics; rules for information interchange Information technology - 8 bit Active code

Industrial automation; Computer Aided DIN V 66304 Design; format for Active the exchange of standard parts data Local and Metropolitan Area Networks; DIN 66325-2 LLC; identical with ISO 88022:1989

Withdrawn

ISO 8802-2

Local and Metropolitan Area Networks; token-passing bus Withdrawn DIN 66325-4 access method; identical with ISO/IEC 88024:1990 Project controlling; project management; concepts

ISO/IEC 8802-4

DIN 69901

Active

DIN 70000 to DIN 79999


DIN TITLE Lubricating nipples; cone type STATUS DIN REPLACEMENT OTHER ORG REPLACEMENT

DIN 71412

Active

Lead storage batteries; starter batteries for DIN 72311-1 motorcycles,

Active
112/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

nominal capacities, main dimensions Lead storage batteries; starter Active DIN 72311-4 batteries, terminals, vent plugs and filler openings Lead storage batteries; starter Active DIN 72311-8 batteries for motor cycles and passenger cars Lead storage batteries; starter batteries for starting, Active DIN 72311-13 lighting and ignition, 12 V, 27, 36, 45 and 54 Ah, for lateral basic fastening 10,5 Lead storage batteries; starter batteries for starting, Active DIN 72311-16 lighting and ignition, 12 V, 27, 36, 45, 54 and 63 Ah, for lateral basic fastening 19 Lead storage batteries; starter DIN 72311-17 batteries, protective covering for terminal

Active

wikipedia.org//List_of_DIN_stand

113/115

9/29/2011

List of DIN standards - Wikipedia, th

Lead storage batteries; starter batteries with basic fastening 10,5 for passenger cars Active DIN 72311-18 and commercial vehicles; nominal capacities, main dimensions Lead storage batteries; starter batteries for commercial Active DIN 72311-20 vehicles; nominal capacities and main dimensions Lead storage batteries; starter batteries with 10,5 basic fastening lugs Active DIN 72311-21 for commercial vehicles; nominal capacities and main dimensions Terminal markings for motor DIN 72552-1 vehicles; scope, principles, requirements Terminal markings for DIN 72552-2 motor vehicles;

Active

Active
114/115

wikipedia.org//List_of_DIN_stand

9/29/2011

List of DIN standards - Wikipedia, th

codes Terminal markings for motor vehicles; Active DIN 72552-3 examples for application on circuit diagrams Terminal markings for DIN 72552-4 motor vehicles; summary

Active

DIN 75490

Radio communication devices in motor Active vehicles; installation space, general requirements

See also
List of ASTM standards List of EN standards List of IEC standards List of ISO standards

External links
DIN Website, in English (http://www.din.de/cmd?level=tpl-home&languageid=en) DIN Fasteners in Details (http://www.deepri.com/din_specifications/index.html) Retrieved from "http://en.wikipedia.org/wiki/List_of_DIN_standards" Categories: DIN standards | DIN This page was last modified on 27 September 2011 at 13:50. Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. See Terms of use for details. Wikipedia is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.

wikipedia.org//List_of_DIN_stand

115/115

You might also like