You are on page 1of 1

Tech Note

Publication Title: Publication No.

Headshok Damper Cartridge Castle Tools 115923.PDF


October 2003

Cannondale Tool
Fits cartridges:
P/N
HDTL176/ • DD10
• DD15
HDTL145/
• DD25
• FT50 • DD50 • FT70 • DD60
HDTL146/ • FT80 • DD80 • DL70 • DL80
• DD60
• MOTO 120 • FT100 • MC80
HDTL147/
• MC60 • MC25

CAUTION: Always carefully insert the castle tool. Scratch marks or


nicks to the damper shaft will result in oil leaks. Avoid touching the
damper shaft with the tool. Trim and glue and old tire tube or duct
tape to line the tool.

Contact Us: Cannondale Australia Cannondale Japan Cannondale Europe


Cannondale Bicycle Corporation Unit 6, 4 Prosperity Parade 12-5 Harayamadai mail: Postbus 5100
172 Friendship Road Warriewood N.S.W 2102 5-cho Sakai City visits: Hanzepoort 27
Bedford, Pennsylvania 15522 Australia Osaka, Japan 590-0132 7570 GC Oldenzaal
(Voice): 1-800-BIKEUSA Phone(02)9979 5851 (Voice): 011.81.722.99.9399 Netherlands
(Fax): 814-623-6173 Fax(02)9979 5688 (Fax): 0722-93-6166 (Voice): +31 541 573580
custserv@cannondale.com cannondaleaustralia@cannondale.com cjcustserv@cannondale.com (Fax): 31-5415-14240
servicedeskeurope@cannondale.com

This document online at: http://www.cannondale.com/bikes/tech/


© 2003 Cannondale Bicycle Corporation - All Rights Reserved

You might also like