You are on page 1of 10

Ericsson KPI Formulas

Accessibility
Call Setup Success Rate
CSSR_Voice(%)
100 * ([ReqCsSucc] / [ReqCs] * [pmNoNormalNasSignReleaseCs] / ([pmNoNormalNasSignReleaseCs] + [pmNoSystemNasSignReleaseCs]) * [pmNoRabEstablishSuccessSpeech] / [pmNoRabEstablishAttemptSpeech]) Not sure why NAS signaling Release Success Rate is multiplied in CS CSSR? Suggest to use the following formula: 100 * [pmTotNoRrcConnectReqCsSucc] / [pmTotNoRrcConnectReqCs][pmNoLoadSharingRrcConnCs] * [pmNoRabEstablishSuccessSpeech] / [pmNoRabEstablishAttemptSpeech]

CSSR_Video(%)
Same as CSSR_Voice, NAS Signaling Release Success Rate is multiplied in the formula? Suggest to use the following formula: 100 * [pmTotNoRrcConnectReqCsSucc] / [pmTotNoRrcConnectReqCs][pmNoLoadSharingRrcConnCs] * [pmNoRabEstablishSuccessCs64] / [pmNoRabEstablishAttemptCs64]

Accessibility (Continue)
PDP Context Activation Success Rate (R99 PS)
CSSR_PS_R99(%)
100 * [ReqPsSucc] / [ReqPs] * [pmNoNormalNasSignReleasePs] / ([pmNoNormalNasSignReleasePs] + [pmNoSystemNasSignReleasePs]) * [pmNoRabEstSuccessPsIntNonHs] / [pmNoRabEstAttemptPsIntNonHs] The formula is actually used to calculate the PS Call Success Rate May need to check if SGSN/GGSN can generate the relevant counters to compute this KPI and differentiate between R99 PS and HSDPA by QoS metrics or collect by driving test. Otherwise, need to revise the KPI name to PS Call Setup Success Rate (R99). If so, suggest to use the following formula 100 * [pmTotNoRrcConnectReqPsSucc] / [pmTotNoRrcConnectReqPs][pmNoLoadSharingRrcConnPs]) * [pmNoRabEstSuccessPsIntNonHs] / [pmNoRabEstAttemptPsIntNonHs]

Accessibility (Continue)
PS Setup Success Rate (HSDPA)
CSSR_PS_HSDPA(%)
100 * [ReqPsSucc] / [ReqPs] * [pmNoNormalNasSignReleasePs] / ([pmNoNormalNasSignReleasePs] + [pmNoSystemNasSignReleasePs]) * [pmNoRabEstablishSuccessPacketInteractiveHs] / [pmNoRabEstablishAttempPacketInteractiveHs] Same situation as CSSR_PS_R99, suggest to use the following formula 100 * [pmTotNoRrcConnectReqPsSucc] / ([pmTotNoRrcConnectReqPs] [pmNoLoadSharingRrcConnPs]) * [pmNoRabEstablishSuccessPacketInteractiveHs] / [pmNoRabEstablishAttempPacketInteractiveHs]

Retainability
CS Call Drop Rate
CDR_CS(%)
100 * [pmNoSystemRabReleaseSpeech] / ([pmNoNormalRabReleaseSpeech] + [pmNoSystemRabReleaseSpeech]) The formula only accounts speech service which does not match with the KPI name. Either change the KPI name or change the formula as below 100 * ([pmNoSystemRabReleaseSpeech] + pmNoSystemRabReleaseCs64]) / ([pmNoNormalRabReleaseSpeech] + [pmNoSystemRabReleaseSpeech] + [pmNoNormalRabReleaseCs64] + [pmNoSystemRabReleaseCs64])

Retainability (Continue)
PS Call Drop Rate
CDR_PS_R99(%)
100 * ([pmNoSystemRabReleasePacket] - [pmNoSystemRabReleaseHs] [pmNoSystemRabReleasePacketUra]) / ([pmNoNormalRabReleasePacket] + [pmNoSystemRabReleasePacket] - [pmNoNormalRabReleaseHs] [pmNoSystemRabReleaseHs] [pmNoNormalRabReleasePacketUra] [pmNoSystemRabReleasePacketUra] + [pmChSwitchSuccFachUra] + [pmNoSuccRbReconfOrigPsIntDCH]) The formula exclude Rab release under URA state. The formula considered to be OK if URA state is not used. Otherwise, it should not be excluded in the formula.

Retainability (Continue)
PS Call Drop Rate
CDR_PS_HSDPA(%)
100 * [pmNoSystemRabReleaseHs] / ([pmNoSystemRabReleaseHs] + [pmNoNormalRabReleaseHs] + [pmNoSuccRbReconfOrigPSIntHs] + [pmNoSuccRbReconfOrigPsIntEul] + [pmPsIntHsToFachSucc]) OK, no problem.

Mobility
Soft handover Success Rate
SHO SR(%)
100 * ([pmSofterHoSuccessNonIur] + [pmSoftHoSuccessNonIur] + [pmSoftSofterHoSuccessIur]) / ([pmSofterHoAttemptNonIur] + [pmSoftHoAttemptNonIur] + [pmSoftSofterHoAttemptIur] OK.

Inter RAT handover Success Rate (2G/3G)


ISHO_CS_3Gto2G(%)
100 * ([pmNoSuccessOutIratHoSpeech] + [pmNoSuccessOutIratHoMulti]) / ([pmNoAttOutIratHoSpeech] + [pmNoAttOutIratHoMulti]) OK.

ISHO_PS_3Gto2G(%)
100 * [pmNoOutIratCcSuccess] / [pmNoOutIratCcAtt] OK.

Mobility (Continue)
Hard handover Success Rate
Single formula for Interfrequency Hard handover that includes all services So, it is suggest to have the same definition of KPI across different network vendor. 100 * ([InterFreqHoCsSpeech12] + [InterFreqHoCsConversational] + [InterFreqHoPsInteractiveLess64] + [InterFreqHoPsInteractiveGreater64] + [InterFreqHoStreamingOther] + [pmSuccNonBlindIfhoPsIntHs] + [pmsuccNonBlindIfhoPsIntEul] + [pmSuccNonBlindIfhoPsStrHs]) / ([CsSpeech12] + [CsConversational] + [PsInteractiveLess64] + [PsInteractiveGreater64] + [StreamingOther] + [pmAttNonBlindIfhoPsIntHs] + [pmAttNonBlindIfhoPsIntEul] + [pmAttNonBlindIfhoPsStrHs])

Traffic
No Problem on Traffic KPI Formula
Counters in KPI formula has been updated with latest counters.

You might also like