Professional Documents
Culture Documents
PS-00371, Rev. H
April 2013
ELITE
ELITE HC
Peak performance
high capacity
meter
F-Series
High performance
compact drainable
Coriolis meter
H-Series
Hygienic compact
drainable Coriolis
meter
Built-in balance bar provides the best single straight tube mass flow
measurement to reduce variability in process control
Superior reliability
Peak
performance
Coriolis meter
T-Series
R-Series
LF-Series
Straight tube
full-bore
Coriolis meter
General purpose
flow-only
Coriolis meter
T-Series Coriolis meters. Our straighttube meter design is based on the ASME
Bioprocessing Equipment Standard. With
optional sanitary fittings, Micro Motion
T-Series meters meet 3-A Sanitary
Standards for Milk and Milk Products, are
EHEDG clean-in-place approved, and
feature a standard surface finish of
32 -inch Ra (0.8 -meter)and
15 -inch Ra (0.38 -meter) is an available option.
TYPE
EL
JANUARY 2002
Contents
Flow performance . . . . . . . . . . . . . . . . . . . . . . . . . 3
Density performance (liquid only) . . . . . . . . . . . . . 4
Temperature specifications . . . . . . . . . . . . . . . . . . 5
Pressure ratings . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Environmental effects . . . . . . . . . . . . . . . . . . . . . 11
Vibration limits . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Sanitary standards . . . . . . . . . . . . . . . . . . . . . . . 11
12
15
15
16
19
27
Flow performance
l/h
25
140
680
3800
3
17
680
3800
500
1100
3200
14,000
30,000
87,000
62
132
383
14,000
30,000
87,000
lb/min
kg/h
gal/min
l/h
0.0038
0.021
0.075
0.165
0.48
0.10
0.57
2.0
4.50
13.0
0.0005
0.0025
0.009
0.02
0.06
0.10
0.57
2.0
4.50
13.0
T025
T050
T075
T100
T150
Repeatability
0.05% of rate
Zero stability
kg/h
Volume (1)
gal/min
Mass
lb/min
T025
T050
T075
T100
T150
(1) Specifications for volumetric flow rate are based on a process-fluid density of 1 g/cc (1000 kg/m3). For fluids with density other than
1 g/cc (1000 kg/m3), the volumetric flow rate equals the maximum mass flow rate divided by the fluids density.
(2) Flow accuracy includes the combined effects of repeatability, linearity, and hysteresis. All specifications for liquids are based on
reference conditions of water at 68 to 77 F (20 to 25 C) and 15 to 30 psig (1 to 2 bar), unless otherwise noted.
(3) When flow rate < (zero stability / 0.0015), then mass flow accuracy = [(zero stability / flow rate) 100]% of rate and
repeatability = [(zero stability / flow rate) 100]% of rate.
(4) When flow rate < (zero stability / 0.0025), then volume flow accuracy = [1.667 (zero stability / flow rate) 100]% of rate, and
repeatability = [(zero stability / flow rate) 100]% of rate.
(5) When flow rate < (zero stability / 0.005), then gas flow accuracy = [(zero stability / flow rate) 100]% of rate, and
repeatability = [(zero stability / flow rate) 100]% of rate.
2.5
100:1
2.0
1:1
20:1
10:1
1.5
Accuracy (%)
1.0
0.5
0
0.5
1.0
1.5
2.0
2.5
0
10
20
30
40
50
60
70
80
90
100
100:1
20:1
10:1
1:1
Accuracy ( %)
1.60
0.31
0.15
0.15
Pressure drop
psi
bar
~0
0.06
0.22
14.3
~0
0.02
0.05
0.99
0.002 g/cc
2.0 kg/m3
Repeatability
0.0005 g/cc
0.5 kg/m3
05000 kg/m3
Range
(1) Density accuracy includes the combined effects of repeatability, linearity, and hysteresis. All specifications for liquids are based on
reference conditions of water at 68 to 77 F (20 to 25 C) and 15 to 30 psig (1 to 2 bar), unless otherwise noted.
Temperature specifications
1.0 C 0.5% of reading in C
Repeatability
0.2 C
Mount transmitter remotely; use junction box
125.5
(52)
140 (60)
122
(50)
100 (38)
60 (16)
20 (7)
20 (29)
40 (40)
300 (149)
320 (160)
280 (138)
240 (116)
200 (93)
140 (60)
100 (38)
60 (16)
20 (7)
20 (29)
60 (51)
60 (51)
Accuracy
(1) Temperature limits may be further restricted by hazardous area approvals. See pages 1213.
(2) When ambient temperature is below 40 F (40 C), a core processor must be heated to bring its local ambient temperature to
between 40 F (40 C) and +140 F (+60 C). Long-term storage of electronics at ambient temperatures below 40 F (40 C) is not
recommended.
(3) For the purposes of selecting electronics options, this graph should be used only as a general guide. If your process conditions are
close to the gray areas, it may be inappropriate to use electronics options other than a junction box. Consult with your Micro Motion
representative.
Pressure ratings
All pressure ratings are based on ASME B31.3.
PED compliance
Sensors comply with council directive 97/23/EC of 29 May 1997 on Pressure Equipment.
psig
bar
1450
725
100
50
(1) Housing is not rated for pressure containment below 20 F (29 C).
Sensor pressure/temperature rating with ASME B16.5 F316/316L socket weld flanges
Models T025T through T150T; Models T075F through T150F
Pressure (psig)
Temperature (F)
Pressure (psig)
Temperature (F)
Pressure (psig)
Temperature (F)
Pressure (bar)
Temperature (C)
Sensor pressure/temperature rating with DIN 11851 Ti Grade 1/304L clad hygienic coupling
Models T025T through T150T; Models T025F through T150F
Pressure (bar)
Temperature (C)
Pressure (bar)
Temperature (C)
Pressure (bar)
Temperature (C)
Pressure (bar)
Temperature (C)
Sensor pressure/temperature rating with EN1092-1 & DIN F316/316L socket weld flanges
Models T025T through T150T; Models T075F through T150F
Pressure (bar)
Temperature (C)
10
Environmental effects
Process temperature effect
Process temperature effect is defined as the worst-case zero offset due to process fluid
temperature change away from the zeroing temperature.
All models
Pressure effect
Pressure effect is defined as the change in sensor flow sensitivity due to process pressure
change away from the calibration pressure. Pressure effect can be corrected.
All models
None
Vibration limits
Meets IEC 68.2.6, endurance sweep, 5 to 2000 Hz, 50 sweep cycles at 1.0 g
Sanitary standards
For sanitary applications, Micro Motion T-Series sensors with sanitary fittings feature a standard 32 -inch Ra (0.8 -meter) tube
surface finish, with 15 -inch Ra (0.38 -meter) surface finish available as an option.
ASME
The Micro Motion T-Series sensor design is based on the ASME Bioprocessing Equipment
Standard 1997. With sanitary fittings, these sensors meet the ASME Bioprocessing
Equipment Standard.
3-A
Micro Motion T-Series sensors with sanitary fittings meet 3-A Sanitary Standards for Milk
and Dairy Products.
USDA
Micro Motion T-Series sensors with sanitary fittings are acceptable for use in dairy plants
and are approved for USDA grading service.
EHEDG
Micro Motion T-Series sensors with sanitary fittings are approved by the European Hygienic
Equipment Design Group. Sensors comply with the hygienic criteria of Machinery Directive
98/37/EC, annex 1 (additional essential health and safety requirements for certain
categories of machinery), section 2.1 (agri-foodstuffs machinery). Test results show that
Micro Motion T-Series sensors can be cleaned in place at least as well as the reference pipe.
11
CSA
Sensors with junction box
12
0575
0575
II 2G Ex ib IIC T1T6 Gb
II 2D Ex ib IIIC T (1) C Db IP66
II 2G Ex ib IIB T1T6 Gb
The maximum surface temperature for dust is as follows: T6:T 80C, T5:T 95C, T4:T 130C,
T3 to T1:T 182C.
Models T025, T050, T075, and T100 with
integral core processor
0575
0575
II 2G Ex ib IIC T1T5 Gb
II 2D ib IIIC T (1) C Db IP66
II 2G Ex ib IIB T1T5 Gb
II 2D ib IIIC T (1) C Db IP66
The maximum surface temperature for dust is as follows: T5:T 95C, T4:T 130C,
T3 to T1:T 182C.
(1) The ATEX "T" rating is defined as the maximum surface temperature of the flowmeter. The "T" rating and the ambient temperature
restrict the maximum allowable temperature of the process fluid (shown in the graphs above).
13
0575
0575
0575
II 2G Ex ib IIB+H2 T1T5
II 2D Ex tD A21 IP66 T (1) C
II 2G Ex ib IIC T1T5
II 2D Ex tD A21 IP66 T (1) C
II 2G Ex ib IIB T1T5
The maximum surface temperature for dust is as follows: T5:T 95C, T4:T 130C, T3 to T1:T 182C.
0575
II 2G Ex ib IIB+H2 T1T4
0575
II 2G Ex ib IIC T1T4
0575
II 2G Ex ib IIB T1T5
The maximum surface temperature for dust is as follows: T5:T 95C, T4:T 130C, T3 to T1:T 182C.
(1) The ATEX "T" rating is defined as the maximum surface temperature of the flowmeter. The "T" rating and the ambient temperature
restrict the maximum allowable temperature of the process fluid (shown in the graphs above).
14
Materials of construction
Wetted parts (1)
Flow tubes
Sanitary fittings (2)
Socket-weld flanges (2)
Sensor housing
Sensor
Core processor
Junction box
(1) General corrosion guides do not account for cyclical stress, and therefore should not be relied upon when choosing a wetted material
for your Micro Motion sensor. Please refer to Micro Motions corrosion guide for material compatibility information.
(2) Flanges are stainless steel; wetted parts are titanium. Only titanium is in contact with process flow.
Weight
Approximate weight with ANSI CL150 socket weld raised face flange
T025
lb
kg
T050
lb
kg
T075
lb
kg
T100
lb
kg
T150
lb
kg
14
15
20
7
7
9
16
17
22
7
8
10
33
34
39
15
16
18
58
59
64
27
27
29
137
138
143
63
63
65
32
33
15
15
57
58
26
27
136
137
62
63
T025
lb
kg
T050
lb
kg
T075
lb
kg
T100
lb
kg
T150
lb
kg
12
13
18
6
6
8
14
15
20
7
7
9
33
34
39
15
16
18
55
56
60
25
25
28
131
132
137
60
60
62
32
33
15
15
54
55
25
25
130
131
59
60
(1) Add 4 lbs (2 kg) for stainless steel core processor housing option (electronics interface codes A, B, D, and E).
15
Dimensions
Sensor with core processor
Dimensions in
inches
(mm)
4 3/8
(111)
1/214 NPT
or M20 1.5
female
2 5/8
(67)
Dim. P
Dim. Q
1 1/4
(32)
5.66
(144)
Dim. M
Dim. N
Dim. C
Dim. B
Dim. R
Dim. E
Dim. A
1/8 (3 mm)
No. of
flow tubes
T025
T050
T075
T100
T150
Tube ID
C (case
diameter)
0.180
(4.57)
0.360
(9.14)
0.619
(15.72)
0.870
(22.10)
1.360
(34.54)
3 1/8
(79)
3 1/8
(79)
4 1/8
(105)
5 1/8
(130)
7 1/8
(181)
4 1/8
(105)
5 1/2
(140)
6 1/8
(156)
11
(279)
11
(279)
5 1/4
(133)
5 1/4
(133)
5 3/4
(147)
6 1/4
(159)
7 1/4
(185)
3 1/2
(89)
3 1/2
(89)
4 1/16
(103)
4 9/16
(116)
5 9/16
(141)
10 5/8
(269)
10 5/8
(269)
11 1/8
(283)
11 5/8
(296)
12 5/8
(321)
8.88
(225)
8.88
(225)
9.44
(240)
9.94
(252)
10.94
(278)
2 11/16
(68)
2 11/16
(68)
3 3/16
(81)
3 11/16
(93)
4 11/16
(119)
(1) For dimensions A and B, see process fittings tables, pages 1926.
16
Dimensions continued
Sensor with integrally mounted Model 1700/2700 transmitter
Dimensions in
inches
(mm)
6 13/16
(174)
2 1/214 NPT or
M20 1.5 female
4 11/16
(119)
2.69
(68)
Optional 2 1/214 NPT
female purge connection
with male hex plug
Dim. F
Dim. N
Dim. C
Dim. B
Dim. R
Dim. E
Dim. A
1/8 (3 mm)
7.27
(185)
No. of
flow tubes
Tube ID
C (case
diameter)
T025
T050
T075
T100
T150
1
1
1
1
1
0.180 (4.57)
0.360 (9.14)
0.619 (15.72)
0.870 (22.10)
1.360 (34.54)
3 1/8 (79)
3 1/8 (79)
4 1/8 (105)
5 1/8 (130)
7 1/8 (181)
4 1/8 (105)
5 1/2 (140)
6 1/8 (156)
11 (279)
11 (279)
9 3/16 (233)
9 3/16 (233)
9 3/4 (247)
10 1/4 (260)
11 1/4 (285)
5.5 (139)
5.5 (139)
6.03 (153)
6.54 (166)
7.53 (191)
2 11/16 (68)
2 11/16 (68)
3 3/16 (81)
3 11/16 (93)
4 11/16 (119)
(1) For dimensions A and B, see process fittings tables, pages 1926.
17
Dimensions continued
Sensor with junction box
Dimensions in
inches
(mm)
Extended
mount option
Optional 2 1/214
NPT female purge
connection with male
hex plug
3 3/4
(95)
3/414 NPT
female
3 1/2
(89)
1 1/4
(32)
Dim. Q
Dim. H
5.66
(144)
Dim. F
Dim. N
Dim. C
Dim. B
Dim. R
Dim. E
Dim. A
1/8 (3 mm)
No. of
flow tubes Tube ID
C (case
diameter)
T075
T100
T150
4 1/8
(105)
5 1/8
(130)
7 1/8
(181)
6 1/8
(156)
11
(279)
11
(279)
4 1/2
(114)
5
(127)
6
(152)
9 7/8
(251)
10 3/8
(264)
11 3/8
(289)
8 9/16
(217)
9 1/16
(230)
10 1/16
(256)
3.19
(81)
3.69
(94)
4.69
(119)
8.56
(217)
9.06
(230)
10.06
(256)
3 3/16
(81)
3 11/16
(93)
4 11/16
(119)
0.619
(15.72)
0.870
(22.10)
1.360
(34.54)
(1) Models T025 and T050 are not available with junction box.
(2) For dimensions A and B, see process fittings tables, pages 1926.
18
Fitting options
Fittings listed here are standard options. Other types of fittings are available. The face to face dimensions for any custom fittings
ordered using a 998 or 999 fitting code are not represented in this table. It is necessary to confirm face to face dimensions of these
fittings at time of ordering. Contact your local Micro Motion representative.
Model T025T
Code
525
526
613
Description
DN15
PN40 EN 1092-1
DN15
PN100 EN 1092-1
1/2-inch CL150 ASME B16.5
F316/F316L
F316/F316L
F316/F316L
614
1/2-inch
CL300
ASME B16.5
F316/F316L
615
1/2-inch
CL600
ASME B16.5
F316/F316L
616
DN15
PN40
DIN 2526
F316/F316L
617
DN15
F316/F316L
621
1/2-inch
636
#8
637
#8
650
DN15
PN40
654
670
DN15
DN10
PN40
671
DN15
676
DN15
781
15mm
20K
Form B1
Form B2
Raised face
Dim. A
13.65 (347)
13.97 (355)
13.31 (338)
Dim. B
3 3/4 (95)
4 1/8 (105)
3 1/2 (89)
Raised face
13.83 (351)
3 3/4 (95)
Raised face
13.95 (351)
3 3/4 (95)
Type C face
13.65 (347)
3 3/4 (95)
Type E face
13.97 (355)
4 1/8 (105)
13.92 (354)
1 (25)
18.67 (474)
15.13 (384)
13.65 (347)
3 3/4 (95)
13.65 (347)
13.93 (354)
3 3/4 (95)
Rd 28 1/8
13.93 (354)
Rd 34 1/8
13.89 (353)
Rd 34 1/8
13.64 (346)
3 3/4 (95)
Dim. A
13.92 (354)
Dim. B
1 (25)
Hygienic
coupling
Hygienic
coupling
13.93 (354)
Rd 28 1/8
13.93 (354)
Rd 34 1/8
13.89 (353)
Rd 34 1/8
Socket weld
flange
Tri-Clamp
Ti grade 1 clad to Hygienic fitting
compatible
304L backing
VCO
Ti grade 1 clad to Swagelok
304L backing
compatible fitting
VCO
Ti grade 1 clad to Swagelok
304L backing
compatible fitting
DIN 2512
F316/F316L
Socket weld
flange
EN 1092-1
F316/F316L
Weld neck flange
DIN11851
Ti grade 1 clad to Hygienic
304L backing
coupling
DIN11851
Ti grade 1 clad to Hygienic
304L backing
coupling
DIN11864-1A Ti grade 1 clad to Hygienic
304L backing
coupling
JIS B 2220
F316/F316L
Socket weld
flange
1/2-inch NPT
female adapter
Type N grooved
face
Form D
Model T025F
Code Description
621
1/2-inch
670
DN10
Tri-Clamp
compatible
DIN11851
Ti grade 1 clad to
304L backing
Ti grade 1 clad to
304L backing
Ti grade 1 clad to
304L backing
Hygienic fitting
671
DN15
DIN11851
676
DN15
19
Description
DN15
PN40 EN 1092-1
DN15
PN100 EN 1092-1
1/2-inch CL150 ASME B16.5
614
1/2-inch
615
1/2-inch
616
DN15
617
DN15
621
1/2-inch
638
#12
639
#12
650
DN15
654
671
DN15
DN15
676
DN15
781
15mm
F316/F316L
F316/F316L
F316/F316L
Form B1
Form B2
Raised face
Dim. A
16.09 (409)
16.41 (417)
15.75 (400)
Dim. B
3 3/4 (95)
4 1/8 (105)
3 1/2 (89)
Raised face
16.27 (413)
3 3/4 (95)
Raised face
16.39 (417)
3 3/4 (95)
Type C face
16.09 (409)
3 3/4 (95)
Type E face
16.41 (417)
4 1/8 (105)
16.37 (416)
1 (25)
21.60 (549)
17.74 (451)
16.09 (409)
3 3/4 (95)
16.09 (409)
16.37 (416)
3 3/4 (95)
Rd 34 1/8
16.37 (416)
Rd 34 1/8
16.08 (409)
3 3/4 (95)
Dim. A
16.37 (416)
Dim. B
1 (25)
16.37 (416)
Rd 34 1/8
16.37 (416)
Rd 34 1/8
3/4-inch NPT
female adapter
Type N grooved
face
Form D
Model T050F
Code Description
621
1/2-inch
671
DN15
676
DN15
20
Tri-Clamp
compatible
DIN11851
Ti grade 1 clad to
304L backing
Ti grade 1 clad to
304L backing
DIN11864-1A Ti grade 1 clad to
304L backing
Hygienic fitting
Hygienic
coupling
Hygienic
coupling
Description
DN15
PN40
DN15
PN100
DN25
PN40
DN25
PN100
1/2-inch CL150
EN 1092-1
EN 1092-1
EN 1092-1
EN 1092-1
ASME B16.5
614
1/2-inch
CL300
ASME B16.5
615
1/2-inch
CL600
ASME B16.5
616
DN15
PN40
DIN 2526
617
DN15
618
DN25
PN40
619
DN25
622
3/4-inch
623
1-inch
628
1-inch
CL150
Tri-Clamp
compatible
Tri-Clamp
compatible
ASME B16.5
629
1-inch
CL300
ASME B16.5
630
1-inch
CL600
ASME B16.5
650
DN15
PN40
DIN 2512
651
DN25
PN40
DIN 2512
654
655
662
DN15
DN25
DN25
PN40
PN40
672
DN25
EN 1092-1
EN 1092-1
ISO 2853
(IDF)
DIN11851
677
DN25
692
DN25
781
15mm
20K
JIS B 2220
F316/F316L
782
25mm
20K
JIS B 2220
F316/F316L
DIN 2526
F316/F316L
F316/F316L
F316/F316L
F316/F316L
F316/F316L
F316/F316L
F316/F316L
Ti grade 1 clad to
304L backing
Ti grade 1 clad to
304L backing
DIN11864-1A Ti grade 1 clad to
304L backing
SMS 1145
Ti grade 1 clad to
304L backing
Socket weld
flange
Weld neck flange
Weld neck flange
Hygienic
coupling
Hygienic
coupling
Hygienic
coupling
Hygienic
coupling
Socket weld
flange
Socket weld
flange
Form B1
Form B2
Form B1
Form B2
Raised face
Dim. A
21.15 (537)
21.47 (545)
21.75 (552)
22.23 (565)
20.81 (529)
Dim. B
3 3/4 (95)
4 1/8 (105)
4 1/2 (115)
5 1/2 (140)
3 1/2 (89)
Raised face
21.33 (542)
3 3/4 (95)
Raised face
21.45 (545)
3 3/4 (95)
Type C face
21.15 (537)
3 3/4 (95)
Type E face
21.47 (545)
4 1/8 (105)
Type C face
21.75 (552)
4 1/2 (115)
Type E face
22.23 (565)
5 1/2 (140)
21.57 (548)
1 (25)
21.43 (544)
2 (50)
Raised face
21.07 (535)
4 1/4 (108)
Raised face
21.81 (554)
4 7/8 (124)
Raised face
21.81 (554)
4 7/8 (124)
Type N grooved
face
21.15 (537)
3 3/4 (95)
Type N grooved
face
Form D
Form D
21.75 (552)
4 1/2 (115)
21.15 (537)
21.75 (552)
21.47 (545)
3 3/4 (95)
4 1/2 (115)
DN25
21.47 (545)
Rd 52 1/6
21.47 (545)
Rd 52 1/6
21.47 (545)
Rd 40 1/6
21.14 (537)
3 3/4 (95)
21.57 (548)
4 15/16 (125)
21
1/2-inch
CL300
615
1/2-inch
CL600
616
DN15
PN40
617
DN15
PN100
618
DN25
PN40
619
DN25
PN100
622
3/4-inch
623
1-inch
628
1-inch
CL150
629
1-inch
CL300
630
1-inch
CL600
650
DN15
PN40
651
DN25
PN40
662
DN25
672
DN25
677
DN25
692
DN25
781
15mm
20K
782
25mm
20K
22
ASME B16.5
F316/F316L
Socket weld
flange
ASME B16.5 F316/F316L
Socket weld
flange
ASME B16.5 F316/F316L
Socket weld
flange
DIN 2526
F316/F316L
Socket weld
flange
DIN 2526
F316/F316L
Socket weld
flange
DIN 2526
F316/F316L
Socket weld
flange
DIN 2526
F316/F316L
Socket weld
flange
Tri-Clamp
Ti grade 1 clad to Hygienic fitting
compatible
304L backing
Tri-Clamp
Ti grade 1 clad to Hygienic fitting
compatible
304L backing
ASME B16.5 F316/F316L
Socket weld
flange
ASME B16.5 F316/F316L
Socket weld
flange
ASME B16.5 F316/F316L
Socket weld
flange
DIN 2512
F316/F316L
Socket weld
flange
DIN 2512
F316/F316L
Socket weld
flange
ISO 2853
Ti grade 1 clad to Hygienic
(IDF)
304L backing
coupling
DIN11851
Ti grade 1 clad to Hygienic
304L backing
coupling
DIN11864-1A Ti grade 1 clad to Hygienic
304L backing
coupling
SMS 1145
Ti grade 1 clad to Hygienic
304L backing
coupling
JIS B 2220
F316/F316L
Socket weld
flange
JIS B 2220
F316/F316L
Socket weld
flange
Raised face
Dim. A
20.81 (529)
Dim. B
3 1/2 (89)
Raised face
21.33 (542)
3 3/4 (95)
Raised face
21.45 (545)
3 3/4 (95)
Type C face
21.15 (537)
3 3/4 (95)
Type E face
21.47 (545)
4 1/8 (105)
Type C face
21.75 (552)
4 1/2 (115)
Type E face
22.23 (565)
5 1/2 (140)
21.57 (548)
1 (25)
21.43 (544)
2 (50)
Raised face
21.07 (535)
4 1/4 (108)
Raised face
21.81 (554)
4 7/8 (124)
Raised face
21.81 (554)
4 7/8 (124)
Type N grooved
face
Type N grooved
face
21.15 (537)
3 3/4 (95)
21.75 (552)
4 1/2 (115)
21.47 (545)
DN25
21.47 (545)
Rd 52 1/6
21.47 (545)
Rd 52 1/6
21.47 (545)
Rd 40 1/6
21.14 (537)
3 3/4 (95)
21.57 (548)
4 15/16 (125)
Description
DN25
PN40 EN 1092-1
DN25
PN100 EN 1092-1
DN25
PN40 DIN 2526
619
DN25
623
1-inch
624
628
1-1/2inch
1-inch
629
1-inch
630
1-inch
641
651
1-1/2inch
1-1/2inch
1-1/2inch
DN25
652
DN40
655
656
658
659
672
DN25
DN40
DN40
DN40
DN25
677
DN25
681
DN40
682
DN40
782
25mm
783
40mm
642
643
F316/F316L
F316/F316L
F316/F316L
Form B1
Form B2
Type C face
Dim. A
26.19 (665)
26.67 (677)
26.19 (665)
Dim. B
4 1/2 (115)
5 1/2 (140)
4 1/2 (115)
Type E face
26.55 (674)
5 1/2 (140)
26.23 (666)
2 (50)
26.23 (666)
2 (50)
Raised face
25.51 (648)
4 1/4 (108)
Raised face
26.25 (667)
4 7/8 (124)
Raised face
26.37 (670)
4 7/8 (124)
Raised face
25.77 (655)
5 (127)
Raised face
26.39 (670)
6 1/8 (155)
Raised face
26.51 (673)
6 1/8 (155)
Type N grooved
face
Type N grooved
face
Form D
Form D
Form B1
Form B2
26.19 (665)
4 1/2 (115)
26.29 (668)
5 15/16 (150)
26.19 (665)
26.29 (668)
26.29 (668)
27.11 (689)
26.23 (666)
4 1/2 (115)
5 15/16 (150)
5 15/16 (150)
6 11/16 (170)
Rd 52 1/6
26.23 (666)
Rd 52 1/6
Type C face
26.29 (668)
5 15/16 (150)
Type E face
26.69 (678)
6 11/16 (170)
26.13 (664)
4 15/16 (125)
26.19 (665)
5 1/2 (140)
23
DN25
623
1-inch
624
628
1-1/2inch
1-inch
629
1-inch
630
1-inch
641
651
1-1/2inch
1-1/2inch
DN25
652
DN40
672
DN25
677
DN25
681
DN40
682
DN40
782
25mm
783
40mm
642
24
DIN 2526
F316/F316L
Socket weld
flange
PN100 DIN 2526
F316/F316L
Socket weld
flange
Tri-Clamp
Ti grade 1 clad to Hygienic fitting
compatible
304L backing
Tri-Clamp
Ti grade 1 clad to Hygienic fitting
compatible
304L backing
CL150 ASME B16.5 F316/F316L
Socket weld
flange
CL300 ASME B16.5 F316/F316L
Socket weld
flange
CL600 ASME B16.5 F316/F316L
Socket weld
flange
CL150 ASME B16.5 F316/F316L
Socket weld
flange
CL300 ASME B16.5 F316/F316L
Socket weld
flange
PN40 DIN 2512
F316/F316L
Socket weld
flange
PN40 DIN 2512
F316/F316L
Socket weld
flange
DIN11851
Ti grade 1 clad to Hygienic
304L backing
coupling
DIN11864-1A Ti grade 1 clad to Hygienic
304L backing
coupling
PN40 DIN 2526
F316/F316L
Socket weld
flange
PN100 DIN 2526
F316/F316L
Socket weld
flange
20K
JIS B 2220
F316/F316L
Socket weld
flange
20K
JIS B 2220
F316/F316L
Socket weld
flange
Type C face
Dim. A
Dim. B
26 3/16 (665) 4 1/2 (115)
Type E face
2 (50)
26 1/4 (666)
2 (50)
Raised face
25 1/2 (648)
4 1/4 (108)
Raised face
26 1/4 (667)
4 7/8 (124)
Raised face
26 3/8 (670)
4 7/8 (124)
Raised face
25 3/4 (655)
5 (127)
Raised face
26 3/8 (670)
6 1/8 (155)
Type N grooved
face
Type N grooved
face
Rd 52 1/6
26 1/4 (667)
Rd 52 1/6
Type C face
Type E face
4 15/16 (125)
Tri-Clamp
compatible
Tri-Clamp
compatible
ASME B16.5
CL300
ASME B16.5
CL600
ASME B16.5
CL150
ASME B16.5
2-inch
CL300
ASME B16.5
646
2-inch
CL600
ASME B16.5
652
DN40
PN40
DIN 2512
653
DN50
PN40
DIN 2512
656
657
658
659
660
661
663
DN40
DN50
DN40
DN40
DN50
DN50
DN51
PN40
PN40
PN40
PN100
PN40
PN100
673
DN40
EN 1092-1
EN 1092-1
EN 1092-1
EN 1092-1
EN 1092-1
EN 1092-1
ISO 2853
(IDF)
DIN11851
674
DN50
DIN11851
678
DN50
681
DN40
682
DN40
683
DN50
684
DN50
693
DN51
783
40mm
20K
JIS B 2220
784
50mm
20K
JIS B 2220
641
644
1-1/2inch
1-1/2inch
1-1/2inch
2-inch
645
642
643
Dim. A
32.04 (814)
Dim. B
2 (50)
32.04 (814)
2 1/2 (64)
Raised face
31.46 (799)
5 (127)
Raised face
32.08 (815)
6 1/8 (155)
Raised face
32.32 (821)
6 1/8 (155)
Raised face
31.68 (805)
6 (152)
Raised face
32.30 (820)
6 1/2 (165)
Raised face
32.56 (827)
6 1/2 (165)
Type N grooved
face
Type N grooved
face
Form D
Form D
Form B1
Form B2
Form B1
Form B2
31.74 (806)
5 7/8 (150)
32.02 (813)
6 1/2 (165)
31.74 (806)
32.02 (813)
31.74 (806)
32.56 (827)
32.02 (813)
32.84 (834)
32.04 (814)
5 7/8 (150)
6 1/2 (165)
5 7/8 (150)
6 11/16 (170)
6 1/2 (165)
7 11/16 (195)
DN51
32.60 (828)
Rd 65 1/6
32.04 (814)
Rd 78 1/6
32.04 (814)
Rd 78 1/6
Type C face
31.74 (806)
5 7/8 (150)
Type E face
32.38 (822)
6 11/16 (170)
Type C face
32.02 (813)
6 1/2 (165)
Type E face
32.66 (829)
7 11/16 (195)
32.04 (814)
Rd 70 1/6
31.88 (810)
5 1/2 (140)
31.89 (810)
6 1/8 (155)
25
644
1-1/2inch
1-1/2inch
1-1/2inch
2-inch
645
2-inch
646
2-inch
652
DN40
653
DN50
663
DN51
673
DN40
674
DN50
678
DN50
681
DN40
682
DN40
683
DN50
684
DN50
693
DN51
783
40mm
784
50mm
642
643
26
Tri-Clamp
compatible
Tri-Clamp
compatible
ASME B16.5
Dim. A
32.04 (814)
Dim. B
2 (50)
32.04 (814)
2 1/2 (64)
Raised face
31.46 (799)
5 (127)
Raised face
32.08 (815)
6 1/8 (155)
Raised face
32.32 (821)
6 1/8 (155)
Raised face
31.68 (805)
6 (152)
Raised face
32.30 (820)
6 1/2 (165)
Raised face
32.56 (827)
6 1/2 (165)
Type N grooved
face
Type N grooved
face
31.74 (806)
5 7/8 (150)
32.02 (813)
6 1/2 (165)
32.04 (814)
DN51
32.60 (828)
Rd 65 1/6
32.04 (814)
Rd 78 1/6
32.04 (814)
Rd 78 1/6
Type C face
31.74 (806)
5 7/8 (150)
Type E face
32.38 (822)
6 11/16 (170)
Type C face
32.02 (813)
6 1/2 (165)
Type E face
32.66 (829)
7 11/16 (195)
32.04 (814)
Rd 70 1/6
31.88 (810)
5 1/2 (140)
31.89 (810)
6 1/8 (155)
Ordering information
Model
Product description
Standard sensor models
T025T
Micro Motion Coriolis T-Series sensor; 1/4-inch; straight tube; titanium; 32 Ra (0.8 m) surface finish
T050T
Micro Motion Coriolis T-Series sensor; 1/2-inch; straight tube; titanium; 32 Ra (0.8 m) surface finish
T075T
Micro Motion Coriolis T-Series sensor; 3/4-inch; straight tube; titanium; 32 Ra (0.8 m) surface finish
T100T
Micro Motion Coriolis T-Series sensor; 1-inch; straight tube; titanium; 32 Ra (0.8 m) surface finish
T150T
Micro Motion Coriolis T-Series sensor; 1 1/2-inch; straight tube; titanium; 32 Ra (0.8 m) surface finish
Improved surface finish sensor models
T025F
Micro Motion Coriolis T-Series sensor; 1/4-inch; straight tube; titanium; 15 Ra (0.38 m) surface finish
T050F
Micro Motion Coriolis T-Series sensor; 1/2-inch; straight tube; titanium; 15 Ra (0.38 m) surface finish
T075F
Micro Motion Coriolis T-Series sensor; 3/4-inch; straight tube; titanium; 15 Ra (0.38 m) surface finish
T100F
Micro Motion Coriolis T-Series sensor; 1-inch; straight tube; titanium; 15 Ra (0.38 m) surface finish
T150F
Micro Motion Coriolis T-Series sensor; 1 1/2-inch; straight tube; titanium; 15 Ra (0.38 m) surface finish
Code
Fitting options
###
Code
Case options
(1)
Purge fittings (two 1/2-inch NPT female); 725 psig (50 bar) containment
Code
Electronics interface
4-wire polyurethane-painted aluminum integral core processor for remotely mounted transmitter with MVD Technology
4-wire stainless steel integral core processor for remotely mounted transmitter with MVD Technology
4-wire polyurethane-painted aluminum integral core processor with extended mount for remotely mounted transmitter with
MVD Technology
4-wire stainless steel integral core processor with extended mount for remotely mounted transmitter with MVD Technology
9-wire polyurethane-painted junction box not available with Models T025 or T050
9-wire polyurethane-painted junction box with extended mount not available with Models T025 or T050
Code
Conduit connections
M20 no gland
Brass/nickel cable gland (cable diameter 0.335 to 0.394 inches [8.5 to 10 mm])
Stainless steel cable gland (cable diameter 0.335 to 0.394 inches [8.5 to 10 mm])
No gland
27
Approval
U (1)
UL
V (2)
3 (2)
IECEx Zone 2
(2)
Code
Language
Code
Future option 1
Code
Future option 2
Code
Code
Factory options
Standard product
ETO product
T025T 613 S Q B M E Z Z Z Z
28
29
30
31
Technology leadership
Micro Motion introduced the first reliable Coriolis meter in 1977. Since
that time, our ongoing product development has enabled us to
provide the highest performing measurement devices available.
Product breadth
From compact, drainable process control to high flow rate fiscal
transferlook no further than Micro Motion for the widest range of
measurement solutions.
Unparalleled value
Benefit from expert phone, field, and application service and
support made possible by more than 750,000 meters installed
worldwide and over 30 years of flow and density measurement
experience.
WWW.micromotion.com
2013 Micro Motion, Inc. All rights reserved.
The Micro Motion and Emerson logos are trademarks and service marks of Emerson Electric Co. Micro Motion, ELITE, MVD, ProLink, MVD Direct
Connect, and PlantWeb are marks of one of the Emerson Process Management family of companies. All other trademarks are property of their
respective owners.
Micro Motion supplies this publication for informational purposes only. While every effort has been made to ensure accuracy, this publication is not
intended to make performance claims or process recommendations. Micro Motion does not warrant, guarantee, or assume any legal liability for the
accuracy, completeness, timeliness, reliability, or usefulness of any information, product, or process described herein. We reserve the right to modify
or improve the designs or specifications of our products at any time without notice. For actual product information and recommendations, please
contact your local Micro Motion representative.
!"" #"
$% !" !"
& $% ! '!(
) *
!" !! !( !
+
!' '
,
!! ! " !"
- ,
! "# (" !
0 1 1
2 ' ' ##
.
/
( '
( " #( "
/
./
&
( (
< 7;
" !'
5 ;
'
6
'(! !!!
+
7
" " #
2
' ( !#
838
"' (
9
:5
'(! ( (
Australia
China
India
Japan
South Korea
Singapore
For a complete list of contact information and web sites, please visit: www.emersonprocess.com/home/contacts/global