You are on page 1of 2

STOCK LIST

1. Stainless Steel: In Specification : AISI 304, 304L, 316, 316L, 321, 310
410, 420 & 430.
A. Pipes: Seamless, Welded (ERW) with various thickness & in scheduled size.
B. Pipe Fittings: Long Bends, Flanges, Elbows, Tees, Stubends, Reducer, Cap Nut & Bolt etc.
C. Sheet, Plates & Flat in size in forms of coil, cut length & piece with various Swg & thick.
D. Round, Square Hexagonal Bars and also in form of Wires.
E. Circle-Ring-Flange in various Diameter and Thickness.
F. Also, Wire, Wire-mesh, Perforated Sheet, Angle, Channel, Billet, Ingot, Casting.
2. Non Ferrous Metal
A. Haste alloy: Gr. B, C-276, in form of Pipe, Rod, Sheet, Fittings, Nut & Bolts.
B. Nickel: Gr. 201, 205 in form of Pipe, Rod, Wire, Sheet, Fittings, Nut & Bolts.
C. Cupro Nickel: Gr. 90/10, 70/30 in form of Pipe, Rod, Sheet, Fittings, Nut & Bolts.
D. Phosphorus Bronze: Gr. PB-2, 90/10 in form of Bar, Bush, Pipe, Fittings, Nut & Bolts.
E. Inconel: 600 & 800, Monel k 400 & k 500, Alloy 20, Titanium, and Tungsten.
3. Copper: Electrolytic (DOW) & Commercial Quality
A. Copper Tube: Imported and Indigenous seamless drawn straight lengths & Coil form.
B. Copper Sheet: Rolled, Hot and Cold, Electrolytic, Industrial and Commercial Quality.
C. Copper Bar in Round, Square Hexagonal, Rectangle.
D. Copper Flats & Strips: Cold Rolled & Drawn-Electrolytic and Commercial.
E. Copper Wire: Soft-Half-Hard, Tinned Copper Wire, D.CC., Super Enameled Wire.
F. Copper Fittings: Elbow Stubends, Regular, Tee etc.
4. Brass: Commercial & Free cutting Quality
A. Brass Tube: Round, Square, Imported & Indigenous, Seamless, Solid Drawn.
B. Brass Sheet: Rolled, Hot & Cold 60/40, 63/37 & 70/30 in 0.005mm to 25.4mm thk.
C. Brass Rod: Round, Hex, Square free cutting, Naval Brass & High Tensile Brass.
D. Brass Flat & Wire: Rolled & Drawn 60/40, 67/37 & 70/30alloy in 50 Swg. To 40 Swg.
5. Aluminium
A. Aluminum Pipe & Rod: Round & Square, Hex in all shape and size.
B. Aluminium Plate Flat Sheet, Chequered Plate, Foil Strip& Wire in each and every size.
6. Mild Steel: C.S. & M.S. Seamless ERW & Boiler Quality Pipe & Tubes
A. Pipes: Seamless & Welded Pipe in Grade 106, Grade b & is-1239 A, B, C Class.
B. Pipe Fittings: Bends, Tee Reducer, Stubend, Flange, Union, Cap, Nipple, Couplings etc. in
Grade A 105 A 234 wpb in B/W, S/W / SCRD / FORGED.
7. Other Item: Valve, Bearing, Bellow, Tools, Saw, Drill, Electro Rods and Hardware Item etc.

Visit us at www.hareshsteel.com

You might also like