Professional Documents
Culture Documents
2004-41.U/C
Marketing Strategy Caterpillar announces the 772 off-highway truck. With a nominal
payload of 50-tons, the 772 is a new edition to the Q&CT product line-up. This truck
provides an excellent 4-pass match to a 988H and a 4-5 pass match to the 385 ME. In
addition, this new model fills a 50-ton gap left when the 773B grew to 60 tons.
The features on the 772 include a revolutionary center-mounted cab, a new C18 engine
with ACERT Technology, and greatly improved access and egress. The 772 was
designed to lower customers cost per ton, meet regulatory requirements, and provide
the operator with a safe, comfortable, and more productive work environment.
Enhancements
C18 Engine
The 772 has the CAT C18 Engine with
ACERT Technology, which will deliver
the performance, reliability and durability
customers have come to expect from
Caterpillar. The C18 engine is designed to
extend the service intervals from 250
hours to 500 hours. A newly designed
block adds structural strength, while a
reengineered cylinder head delivers
improved airflow.
Page 2 of 7
CONFIDENTIAL
The 772 has an all-new operator station, designed to provide superior operator comfort
and control. The operator station delivers:
All new center-mounted cab, provides additional room and vast improvements in
operator comfort
Operator seat moved to center and trainer seat to left for walk-in access
Increased storage room
52 percent more glass area
14 in wider cab and provides 8 percent more interior volume
A new ergonomic design and layout of controls to provide increased productivity and
reduced operator fatigue.
Caterpillar Comfort Seat with improved comfort, support and durability.
Integrated stairway access system allows the operator to easily enter and exit the
truck.
An optional camera system, which provides visibility to the rear of the truck through
a 7-inch LCD color monitor in the cab. (Will not be offered at 1st production.)
Optional Heated mirror
Page 3 of 7
CONFIDENTIAL
Page 4 of 7
CONFIDENTIAL
Entirely redesigned gauge cluster which is easier to read and is more informative. The
772 comes standard with Cat Messenger, providing real-time machine performance and
diagnostic data. Optional payload monitoring available through the standard Messenger
display.
Other Changes
All hydraulic brakes replace air brakes from previous model. Brake actuation use to
be air, it is now hydraulic which allowed for the removal of the air compressor as well
as the air lines to the brakes.
Product Link On Board Communications will be available from the factory
Five liner options for both dual-slope and flat-floor bodies to match application
specific customer needs
Caterpillar will now offer a rubber liner option, which provides superior wear
resistance and operator comfort through reduced impact and noise.
Body structural improvements such as a stronger floor structure, front wall
improvements, and improved sidewall-floor joint
Three - Point operator restraint
Electrical lockouts at ground level
Standard on-board QuickEvac system for simpler, faster oil changes
AC is standard
Page 5 of 7
CONFIDENTIAL
Specifications - 772
Gross Vehicle Weight
181,000 lb
Body Hoists
Chassis
55,171 lb
136 gal/min
Nominal Payload
50 tons
2,500 psi
Engine Model
C18
500 psi
Gross Power
598 hp
Net Power
535 hp
Suspension
Number of Cylinders
9.2 in
Peak Torque
1,988 lb ft
5.9 in
Bore
5.7 in
5.4 0
Stroke
7.2 in
Standard Tires
21.00R33 (E4)
Displacement
1,105 in
Steering
Steering Standards
Transmission (speeds)
SAE J1511
Forward 1
8.0 mph
ISO 5010
Forward 2
11.0 mph
Forward 3
14.9 mph
Forward 4
20.0 mph
Forward 5
27.1 mph
Forward 6
36.5 mph
216 in2
Forward 7
49.5 mph
7,794 in2
Reverse
10.5 mph
Steer Angle
36.0 degrees
Brakes
48%
140 gal
Rear Axle
52%
Cooling System
30 gal
Crankcase
16 gal
Front Axle
34%
22 gal
Rear Axle
66%
Steering Tank
9 gal
15 gal
31.7 yds
35 gal
40.8 yds
73 gal
30.5 yds
14 gal
41.0 yds
19 gal
CONFIDENTIAL
Ordering Guide
Serial Number Prefix The new serial number prefix for the 772 is RLB.
Production - The source of the 772 is Decatur, Illinois. Initial production of the 772 is
expected to begin in January 2007.
Pricing Trade discount on this model will be 41.0%. A 2% cash discount is
applicable, if earned.
Sales Support and Training Materials
Title
Media Number
Available
772 Specalog
AEHQ
11/1/2006
Product Support Materials and Training - Service Manual, Parts Book, Operation and
Maintenance Manual will be available at first production, June 2006.
New tooling required - No new tooling is required.
Parts availability - At shipment, Caterpillar will have a 30-day supply of 95% of the
serviceable part numbers, and at least one of each serviceable part number will be in
the parts system.
Warranty The standard Caterpillar warranty applies; 6 months, unlimited hours.
Additional Information
NACD / Product Group contacts For product or application questions, contact one
of the following:
Jason Rhoades
309-675-1026
Dave Ellington
217-475-4592
Page 7 of 7
CONFIDENTIAL