You are on page 1of 3

Vignan University

Staff Name:
YSV,PRR

Regd.No
Year

Semester

Branch

II

ECE

II

Department: ECE

Subject: STLD

Course
Name:B.Tech

DATE:2-5-13

Section
Common for C, D
Mid-3
Maxmarks:30

Set-1
Answer all the questions
1. a) what do you mean by PLA and PAL?
b) Define Moore machine?
c) Define synchronous counter?
d) List the all the types of shift registers?
e) Define sequential circuit?
f) Write any two applications of flip-flops?
g) Write excitation table of T flip-flop?
h) Write the truth table of JK flip-flop?
i)Define Race around condition?
j) Which flip-flop is used in shift registers?
Answer any of the two questions
2. a) Distinguish between Mealy and Moore machines.
b) Explain capabilities and limitations of finite state machine.
3. Design a MOD-12 synchronous counter using JK flip flops.
4. Design a combinational circuit using PAL by considering the Boolean functions.
W (A, B, C) = (2, 12, 13),

x(A,B,C,D) = (7,8,9,10,11,12,13,14,15)

y(A,B,C) = (0,2,3,4,5,6,7,8,10,11,15),

Z (A, B, C) = (1, 2, 8, 12, 13)

Regd.No

Vignan University

Year

Staff Name:
YSV,PRR

Semester

Branch

II

ECE

II

Department: ECE

Subject: STLD

Course
Name:B.Tech

DATE:2-5-13

Section
Common for C, D
Mid-3
Maxmarks:30

Set-2
Answer all the questions
1. a) which flip-flops can be used in counters?
b) Which gates are programmable in PAL?
c) Write the excitation table of D flip-flop?
d) Write the truth table of RS flip-flop?
e) Define Mealy machine?
f) What do you mean by excitation table?
g) Define asynchronous counter?
h) Define Register?
i) List out the different types of ROMS?
j)Define Finite state machine?
Answer any of the two questions
2. a) Design a asynchronous 3-bit ripple counter and explain the operation with the help of
waveforms.
b) Design a counter with the following repeated binary sequence 0, 1,2,4,6 using D flipflops.
3. a) Draw the diagram of a 4-bit bidirectional shift register and explain its operation.
b) Explain capabilities and limitations of finite state machine.
4. a) A combinational circuit is defined by the functions F1 (A, B, C) =

(3, 5, 6, 7)

F2 (A, B, C) =

(0, 2, 4, 7) Implement the circuit with a PLA?

You might also like