Professional Documents
Culture Documents
Lap slices should not be used for bar larger than 36 mm.
Lapping is not allowed for the bars having diameters more than 36 mm.
Minimum number of bars for a square column is 4 and for circular column are 6.
Longitudinal reinforcement should not be less than 0.8% and more than 6% of gross
C/S.
All reinforcement shall be free from mill scales, loose rust & coats of paints, oil or any
other substances.
Main bars in the slabs shall not be less than 8 mm (HYSD) or 10 mm (Plain bars) and
the distributors not less than 8 mm and not more than 1/8 of slab thickness.
salam, knl x org dlm gmbar ni.... xde pape pun... akak aku menanya, die pun ade
org menanya, rase cam org segamat, aku cam knl, tp x cam sape... if kenal roger
ye... tq