You are on page 1of 15

Riadhs Curriculum Vitae

Personal Information:
Name:- Riadh Noaman Mohammed Haider
Date and Place of birth: Yemen, Taiz, 1/1/1986

Nationality: Yemeni
Marital status: Married
Objective: To be one of the best high-level Professionals in my chosen career.
Mobile Number: +967-777679965 OR +967-771839176
E-mail address: RIADH_NOAMAN@YAHOO.COM OR Riadhnoaman@gmail.com
Address: Sanaa- Sawan

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

[2012]

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound Outstandgfd hgdfh dfh df fgh dfghdfhdfhng knowledge of applicable design for Instrument and
Control designs
nowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .
Provide engineering support for procurement activities for instrumentation and control systems
Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:
Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
1) Principals of pressure control valves engineering, types and construction.
2) Sizing of pressure controls valves.
3) Principals of positioners, actuators, its types, construction, and sizing.
4) Principal of pressure regulators, and regulators sizing.

Programmable Logic Controllers and (PLCs) and SCADA Systems course,


[2011]

II

[2009]

English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]
Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:


Excellent skill in both computer software & hardware maintenance.
Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:
Arabic: Mother tongue.
English: Very Good (reading, writing &listening) & Good speaking

Hobbies:
Reading

III

Swimming.
Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)
Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .
Provide engineering support for procurement activities for instrumentation and control systems
Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

IV

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.

[2009]

Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)


[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:
Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
5) Principals of pressure control valves engineering, types and construction.
6) Sizing of pressure controls valves.
7) Principals of positioners, actuators, its types, construction, and sizing.
8) Principal of pressure regulators, and regulators sizing.
Programmable Logic Controllers and (PLCs) and SCADA Systems course,
[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]

Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:


Excellent skill in both computer software & hardware maintenance.
Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:
Arabic: Mother tongue.
English: Very Good (reading, writing &listening) & Good speaking

Hobbies:
Reading
Swimming.

VI

Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)

Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .
Provide engineering support for procurement activities for instrumentation and control systems
Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

VII

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.

[2009]

Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)


[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:
Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
9) Principals of pressure control valves engineering, types and construction.
10) Sizing of pressure controls valves.
11) Principals of positioners, actuators, its types, construction, and sizing.
12) Principal of pressure regulators, and regulators sizing.
Programmable Logic Controllers and (PLCs) and SCADA Systems course,
[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]

VIII

Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:


Excellent skill in both computer software & hardware maintenance.
Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:
Arabic: Mother tongue.
English: Very Good (reading, writing &listening) & Good speaking

Hobbies:
Reading
Swimming.

IX

Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)

Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .
Provide engineering support for procurement activities for instrumentation and control systems
Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.

[2009]

Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)


[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]
Training in the following fields:
Digital Switching Systems
Ground Station
Traffic
Microwave System
Optical System

[ 08/08/2008 To

Practical Training in Yemen Mobile Co. Sanaa (Summer 2007) about


[2007]
CDMA Principle,
Wireless CDMA RF Performance Optimization
Network KPI Analysis
Capacity and coverage Planning
Signaling CCS7
BSC Switch Modules
BSC Service Modules and BTS Types & Configuration
Practical Training Course in Sanaa International Air Port about (ILS, VOR, DME, Localizer,
Beacon Marker and Recording Device) Sanaa
[15/08/2007 To
01/09/2007]

Education:
Theoretical and technical course about Pressure Control valve and pressure regulators for 30 days,
[2011]
(Fisher Emerson processes Management):
13) Principals of pressure control valves engineering, types and construction.
14) Sizing of pressure controls valves.
15) Principals of positioners, actuators, its types, construction, and sizing.
16) Principal of pressure regulators, and regulators sizing.
Programmable Logic Controllers and (PLCs) and SCADA Systems course,
[2011]
English language course for one month in "Business conversation" from Apex institute for training and
consulting Sana'a
[2010]

XI

Training Course ( Practical & theoretical) in (General Telecommunication Institute) about WIMAX
Network Sanaa
[23/08/2008 To 27/08/2008]
Training Course ( Practical & theoretical) in (General Telecommunication Institute). About(PCM-PDHSDH) Sanaa
[ 09/08/2008 To 20/08/2008]
Practical Training Course in (General Telecommunication Institute). About Digital Switching Systems Alcatel
and Huawei. Sanaa
[18/08/2007 To
05/09/2007]
English language course (level three) languages institute in Aden UniversityAden [22/02/2004 To
18/05/2004]
General Secondary School Certificate, Science Section, with Average Grade (V.Good 81.89%)Taiz.
[2003]

Researches:
Graduation Project about WIMAX physical layer with MIMO simulation using MATLAB.
[2009]
Seminar about Smart Antenna Technologies.
[2009]
Course Project about Neural Network by using MATLAB.
[2008]
Course Project about Power Supply Protection for Electronic Devices by using PSPISE.
[2007]

Skills and Abilities:


Excellent skill in both computer software & hardware maintenance.
Excellent skill in surfing internet.
Work professionally on Windows XP & Windows ME operating systems.
Good skill in dealing with modern computer operating systems(Windows Vista & Windows 7)
Good skill in dealing with Microsoft Office 2003 (Word, Excel, PowerPoint& Outlook)
Good knowledge in C++ Language
Good skill in dealing with the language of technical computing (MATLAB)
V. Good knowledge in electronic control, electrical materials and instrumentation equipment.
Ability to work very well for a long time under any circumstances.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA).
Good knowledge of international codes and standards.
Ability to effectively work as a team member or leader: Works as an effective member of a team, with
an understanding of how own team interacts with other within the area in order to achieve the objectives of
the function, Successful at working on multidisciplinary teams and Committed to quality workmanship and
ethical conduct.
Solving Problems: Demonstrates ability to solve problems and carry out assignments that may require a
certain degree of variation and adaptation, Identifies the key elements of a problem and its root cause.
Ability to learn more and develop my knowledge.
Ability to deal and contact with people.
Active thinking, creative and cooperative person.
Ability to review engineering documents

Languages:
Arabic: Mother tongue.
English: Very Good (reading, writing &listening) & Good speaking

Hobbies:
Reading
Swimming.

XII

Travelling.

References:
Dr. Adnan Abdullah Zain (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen).
TEL.NO: +967-733721476 E-MAIL: ADNAN_ZAIN2003@YAHOO.COM
Dr. Abdullah Bin Goth (Department of Electronics & Communication, Faculty of Engineering,
Aden University, Aden, Republic of Yemen)
TEL.NO: +967-777342609 E-MAIL: ABOYASSER_A@YAHOO.COM

Qualification:
Bachelor degree in (Electrical) Electronic & Communications Engineering
Faculty of Engineering, University Of Aden, Republic of Yemen
General evaluation: Very Good (84%) [July, 2009]

Work Experience:
Application Engineer in Fisher Controls-Emerson Process Management- in YTCC (YEMEN TRADING AND
CONSTRUCTION COMPANY LTD.), (LP of Emerson Process Management in Yemen)

Vivid Understanding of technical specifications.

Sizing calculations (control valves, actuators , positioners, level controller, and pressure regulators).

Profound knowledge of field instruments and specifications

Outstanding knowledge of applicable design for Instrument and Control designs

[2012]

About two year as Technical and sales engineer (Electrical, Mechanical, Instrumentation and Control Engineer)in
YTCC (YEMEN TRADING AND CONSTRUCTION COMPANY LTD.), Oil and Gas Division. [2010-2012]
Achievements:
Moved from Technical Role to Marketing to get more experience and interact with more people to make
participate and exhibits the product through the market.
Wide knowledge of different control and safety systems (DCS, SIS, BMS, SCADA)

Determined all calibrated materials and submitted requirements to shop.

Determined instruments and their specifications for instrument and control systems

Worked as electrical and instrumentation engineer for most electrical and instrumentation equipment.

Improve my technical acknowledgment in electrical and instrumentation engineering (Pressure Control Valves ,
Actuators, Positioners, Pressure Regulators, Pressure Safety valves, Sensors, Pressure and Temp. Transmitters,
Pressure & Temperature Gauges ,Manifolds ,Level Switches, Ultrasonic Flow-meter, Orifice Plate Flow-meter,
Turbine Flow-meter, ESDV, Motors, Generators, Transformers, etc).
Improve my technical acknowledgment in most mechanical and electrical equipments (Stationary Air
Compressors Portable Air Compressors ,Gas Compressors ,Pumps ,Mechanical Seals ,Gaskets ,Instrumentations
Valve and Fittings ,Hoses ,Industrial Manual Valves, Motors, Generators ,Transformers, UPS, Electrical and
Electronics circuits) .
Provide engineering support for procurement activities for instrumentation and control systems
Preparing the technical and commercial offers for the clients with specific specifications.

Follow up the tenders technically and commercially for all explorations and production companies in Yemen
(Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).
Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

XIII

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.

[2009]

Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)


[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


[ 08/08/2008 To
27/08/2008]
Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Total, SAFER, OMV, OXY, Dove Energy, DNO, Calvalley, YLNG and Junnah Hunt oil CO.).

Flow up the payments and back office work.

Logistics, timely deliveries and clearing of goods.

I have good dealing with engineers, logistics and supply team in all oil and gas Companies in Yemen.

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

XIV

[ 08/08/2008 To

[2009]

Training During University Study:


Graduation Project under title WIMAX Physical layer with MIMO Simulation using MATLAB.
Yemen Mobile Corporation for Mobile Communications Sanaa (Summer 2008)
[2008]
Training in the following fields:
CDMA Principle
CDMA1X Handoff Algorithm
CDMA1X Power Control Algorithm

Laboratory Practice

Practical Training Course in Public Telecommunication Corporation Sanaa


27/08/2008]

XV

[ 08/08/2008 To

[2009]

You might also like