Professional Documents
Culture Documents
CAT NO.
ALI - 04
PRECISION
ROLLER CHAIN
roller chain is a series of roller links and pin links alternately arranged, and joined throughout the length of the chain.
Each roller link consists of two rollers, slipped into bushings,
then press-tted into (inner) side plates. The pin links are made
up of two pins press-tted into two (outer) side plates. When assembled, the two pins of the pin link slip into the bushings of the
adjacent roller links. The bushings pivot on the pins while the
rollers turn on the outside of the bushings, allowing smooth,
free-moving operation, and access of lubrication to the various
parts of the chain.
Roller chain sizes are determined by four primary dimensions:
pitch, inside width of the roller link, roller diameter, and plate
thickness. Pitch, the distance in inches between centers of adjacent exing joints, forms the proportional basis for the remaining
dimensions. Chain size is designated by the pitch dimension, and
chain length is expressed in terms of pitch, or in feet and inches.
The selection of either riveted or cottered construction depends on the size of the roller chain. Riveted construction is
available for chain sizes 25-160, and cottered construction for
chain sizes 60 and larger. Multiple strands are also available.
Roller chain varies in assembly according to the kind of conguration and the number of pitches required. If chain is furnished
endless, it may be ordered riveted endless (a permanent connection) or assembled endless with a connecting link.
A connecting link, either spring clip or cottered style, is supplied with chain lengths having an even number of pitches.
Spring clip connecting links are used for 25-80 size chain, while
cottered connecting links are recommended for 100 size chain
and larger. The slip-t assembly of the cover plate on the pins of
the connecting link is appropriate for most applications involving
low to moderate chain speeds and loads.
For roller chain measuring an odd number of pitches, an offset
link is required. One-pitch offset links have a slip-t pin milled at
on one end to prevent it from turning in the side plate. One-pitch
offset links are available for all chain sizes, except number 25,
which requires a two-pitch offset link. Two-pitch offset links consist of an offset link and a roller link. The pin is press-tted in the
offset side plate and riveted. This type of assembly increases the
strength and rigidity of the two-pitch offset, making it especially
suitable for heavy-duty service. Two-pitch offsets are available for
all chain sizes.
PRECISION
ROLLER CHAIN
R
Pin link
Roller link
Roller
Bushing
press-tted
in the inner
link plate
Pin press-tted
in the outer link
plate
Service Durability
The even distribution of load-bearing roller chain over the
sprocket teeth and the low surface friction and exing joint
pressure between lubricated chain and sprocket parts give
roller chain substantial load-handling capacity and a long, reliable service life. Protected by oil, roller chain is minimally
affected by adverse environmental conditions, such as high
temperature, dust, and dirt. Roller chain manufactured with
specialty materials or coatings resists moisture and corrosion.
Application Versatility
The efciency and durability of roller chain suit it for a wide
range of purposes, speeds, and load sizes. Roller chain
drives are easily assembled, conserve space, and can be
readily adapted to design changes.
Connector link
Offset link
Economical Choice
Taking into consideration the strength, reliability, and versatility
of roller chain, the purchase price and maintenance costs are
economical. Certain kinds of roller chain drives can be repaired
or replaced as needed without disturbing the other components
in the drive assembly. If stored in a reasonably protected environment, roller chain does not deteriorate with age.
HOW TO ORDER
Roller Chain with Connecting Link
When the number of pitches is even, a connecting link is included.
To order roller chain, the following information is needed: quantity, size, type
cottered or riveted, and chain length. The
style and spacing of attachments must be
specied when ordering attachment chain.
www.alliedlocke.com
ANSI
Chain
No.
25*
35*
40
41
50
Pitch
P
14
38
12
12
58
34
Roller
Width
Dia.
W
D
Riv. End
to Center
Line
A
Dimensions In Inches
Conn. End
Link Plate
to Center
Line
Height
Thickness
B
H
T
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
0.125
0.188
0.312
0.250
0.375
0.130*
0.200*
0.312
0.306
0.400
0.153
0.228
0.321
0.261
0.397
0.189
0.276
0.368
0.314
0.455
0.228
0.356
0.475
0.390
0.594
0.029
0.050
0.058
0.050
0.079
0.091
0.141
0.156
0.141
0.200
930
2,320
3,970
2,760
6,620
0.09
0.22
0.42
0.28
0.68
60
80
100
120
140
1
114
112
134
0.500
0.625
0.750
1.000
1.000
0.469
0.625
0.750
0.875
1.000
0.497
0.645
0.789
0.983
1.066
0.551
0.724
0.941
1.219
1.259
0.712
0.950
1.188
1.425
1.663
0.093
0.125
0.157
0.189
0.219
0.234
0.312
0.375
0.437
0.500
9,270
16,540
25,360
32,640
45,210
0.97
1.71
2.65
3.79
4.96
160
180
200
240
2
214
212
3
1.250
1.406
1.500
1.875
1.125
1.406
1.562
1.875
1.282
1.404
1.580
1.886
1.469
1.675
1.764
2.184
1.901
2.130
2.376
2.850
0.255
0.283
0.312
0.375
0.563
0.687
0.782
0.937
57,780
80,480
109,150
152,140
6.32
9.04
10.31
16.40
ANSI
Chain
No.
Pitch
P
Roller
Width
Dia.
W
D
Riv. End
to Center
Line
A
Dimensions In Inches
Conn. End
Link Plate
to Center
Line
Height
Thickness
B
H
T
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
35 MULTIPLE STRAND
35-2
35-3
38
38
.188
.188
.200
.200
.438
.631
.468
.675
.356
.356
.050
.050
.141
.141
4,640
6,950
0.42
0.63
.312
.312
.312
.312
.312
.312
.606
.888
1.171
.661
.947
1.242
.475
.475
.475
.058
.058
.058
.156
.156
.156
7,500
11,250
15,000
0.82
1.22
1.63
.375
.375
.375
.400
.400
.400
.752
1.111
1.481
.807
1.178
1.532
.594
.594
.594
.079
.079
.079
.200
.200
.200
13,230
19,850
26,460
1.34
2.00
2.67
.500
.500
.500
.469
.469
.469
.945
1.397
1.845
1.000
1.452
1.901
.712
.712
.712
.093
.093
.093
.234
.234
.234
18,530
27,790
37,050
1.93
2.88
3.83
.625
.625
.625
.625
.625
.625
1.220
1.791
2.388
1.303
1.882
2.451
.950
.950
.950
.125
.125
.125
.312
.312
.312
33,080
49,620
66,150
3.39
5.07
6.76
40 MULTIPLE STRAND
40-2
40-3
40-4
12
12
12
50 MULTIPLE STRAND
50-2
50-3
50-4
58
58
58
60 MULTIPLE STRAND
60-2
60-3
60-4
34
34
34
80 MULTIPLE STRAND
80-2
80-3
80-4
1
1
1
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
ANSI
Chain
No.
Pitch
P
Roller
Width
Dia.
W
D
Riv. End
to Center
Line
A
Dimensions In Inches
Conn. End
Link Plate
to Center
Line
Height
Thickness
B
H
T
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
114
114
114
.750
.750
.750
.750
.750
.750
1.493
2.198
2.903
1.662
2.367
3.068
1.188
1.188
1.188
.157
.157
.157
.375
.375
.375
50,720
76,080
101,430
5.28
7.90
10.52
.875
.875
.875
1.888
2.773
3.668
2.060
2.969
3.849
1.425
1.425
1.425
.189
.189
.189
.437
.437
.437
65,270
97,910
130,540
7.53
11.24
14.97
1.000
1.000
2.029
3.005
2.236
3.174
1.663
1.663
.219
.219
.500
.500
90,410
135,610
9.85
14.74
1.125
1.125
2.450
3.606
2.631
3.786
1.901
1.901
.255
.255
.563
.563
115,550
173,320
12.53
18.74
1.406
2.707
2.967
2.130
.283
.687
160,960
17.82
1.562
1.562
2.990
4.399
3.173
4.583
2.376
2.376
.312
.312
.782
.782
218,300
327,450
21.08
31.78
1.875
1.875
3.618
5.348
3.913
5.636
2.850
2.850
.375
.375
.937
.937
304,280
456,420
32.32
48.11
112
112
112
1.000
1.000
1.000
134
134
1.000
1.000
2
2
1.250
1.250
214
1.406
212
212
1.501
1.501
3
3
1.875
1.875
SINGLE STRAND
ANSI
Chain
No.
50H-1
60H-1
80H-1
100H-1
120H-1
140H-1
160H-1
200H-1
Pitch
P
58
34
1
114
112
134
2
212
Roller
Width
Dia.
W
D
Riv. End
to Center
Line
A
Dimensions In Inches
Conn. End
Link Plate
to Center
Line
Height
Thickness
B
H
T
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.375
.500
.625
.750
1.000
1.000
1.250
1.500
.400
.469
.625
.750
.875
1.000
1.125
1.562
.432
.570
.720
.845
1.070
1.138
1.337
1.689
.487
.625
.783
1.002
1.259
1.303
1.514
1.894
.374
.712
.950
1.188
1.425
1.663
1.901
2.376
.093
.125
.157
.189
.219
.250
.281
.375
.200
.234
.312
.375
.437
.500
.563
.782
7,940
12,130
19,850
30,870
36,390
48,510
60,630
103,630
0.77
1.16
2.00
3.02
4.21
5.54
7.35
12.33
.500
.625
.750
1.000
1.000
1.250
1.501
.469
.625
.750
.875
1.000
1.125
1.562
1.090
1.360
1.630
2.014
2.163
2.555
3.230
1.140
1.420
1.736
2.171
2.343
2.736
3.437
.712
.950
1.188
1.425
1.663
1.901
2.376
.125
.157
.187
.219
.250
.281
.375
.234
.312
.375
.437
.500
.563
.782
24,260
39,690
52,920
71,880
94,370
121,260
207,260
2.31
3.97
6.07
8.67
11.01
14.64
24.51
DOUBLE STRAND
60H-2
80H-2
100H-2
120H-2
140H-2
160H-2
200H-2
34
1
114
112
134
2
212
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
Dimensions In Inches
Roller
Pitch
P
Chain
No.
12
40HP
50HP
60HP
80HP
C2040HP
C2042HP
C2050HP
C2052HP
C2060HP
C2062HP
C2080HP
C2082HP
58
3 4
1
1
1
114
114
112
112
2
2
Pin
Link Plate
Height
Thickness
H
T
Width
W
Dia.
R
Out Dia.
D
Ins. Dia.
d
Length
A
.312
.375
.500
.625
.312
.312
.375
.375
.500
.500
.625
.625
.312
.400
.469
.625
.312
.625
.400
.750
.469
.875
.625
1.126
.224
.287
.331
.449
.224
.224
.287
.287
.331
.331
.449
.449
.157
.201
.235
.318
.161
.161
.201
.201
.235
.235
.318
.318
.327
.404
.508
.638
.326
.326
.403
.403
.508
.508
.655
.655
.362
.453
.555
.758
.353
.353
.427
.427
.548
.548
.693
.693
.475
.594
.712
.950
.475
.475
.594
.594
.712
.712
.950
.950
.058
.079
.073
.125
.058
.058
.079
.079
.093
.093
.125
.125
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
2,867
4,631
5,754
11,466
2,870
2,870
4,640
4,640
5,960
5,960
11,470
11,470
.35
.55
.67
1.41
0.28
0.56
0.48
0.86
0.68
1.24
1.71
2.41
ANSI
Chain
No.
40SB
50SB
60SB
80SB
Pitch
P
12
58
34
Roller
Width
Dia.
W
D
.312
.375
.500
.625
Riv. End
to Center
Line
A
.312
.400
.469
.621
.333
.420
.523
.676
Dimensions In Inches
Conn. End
Link Plate
to Center
Line
Height
Thickness
B
H
T
.391
.475
.578
.731
.475
.594
.712
.950
.058
.079
.093
.125
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.156
.200
.234
.312
3,270
5,430
7,610
12,790
0.41
0.67
0.96
1.70
www.alliedlocke.com
9
ROLLERLESS CHAIN
SELF-LUBE CHAIN
SELF-LUBE
SINGLE STRAND
Self-lube roller chain (sintered bushing) assures
seizure-free, long life when normal lubrication is
not possible or restricted in cases such as textiles,
packing, and printing machines. Self lube roller
chain is interchangeable with ANSI roller chain and
workable on standard ANSI sprockets.
SL is added for identication.
ANSI
Chain
No.
40SL
50SL
60SL
80SL
C2040SL
C2050SL
C2060SL
C2060HSL
C2080HSL
Roller
Pitch
P
Width
W
Dia.
D
12
.312
.375
.500
.625
.312
.375
.500
.500
.625
.312
.400
.469
.625
.312
.400
.469
.469
.625
58
34
1
1
114
112
112
2
Dimensions In Inches
Riv. End
Conn. End
Link Plate
to Center
to Center
Line
Line
Height
Thickness
A
B
H
T
.321
.399
.497
.645
.321
.399
.497
.570
.720
.368
.455
.551
.724
.368
.455
.551
.625
.873
.475
.594
.712
.950
.475
.594
.712
.712
.950
.058
.079
.093
.125
.058
.079
.093
.125
.157
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.156
.200
.234
.312
.156
.200
.234
.234
.312
2,760
4,640
5,960
11,470
2,760
4,640
5,960
7,060
11,800
0.40
0.65
0.91
1.63
0.30
0.50
0.73
0.79
1.34
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.200
.234
.312
.375
6,620
9,270
15,880
25,360
0.56
0.79
1.40
2.24
ANSI
Chain
No.
55
65
85
105
Pitch
P
58
34
1
114
Bushing
Width
Dia.
W
D
.375
.500
.625
.750
.278
.330
.443
.535
Dimensions In Inches
Riv. End
Conn. End
Link Plate
to Center
to Center
Line
Line
Height
Thickness
A
B
H
T
.400
.497
.645
.789
.455
.551
.724
.941
.594
.712
.950
1.190
.079
.093
.125
.157
www.alliedlocke.com
ANSI
Chain
No.
Pitch
P
12
C40
C50
C60
C80
58
34
Roller
Width
Dia.
W
D
.312
.375
.500
.625
Riv. End
to Center
Line
A
.312
.400
.469
.625
.321
.399
.497
.645
Dimensions In Inches
Conn. End
Link Plate
to Center
Line
Height
Thickness
B
H
T
.368
.455
.551
.724
.475
.594
.712
.950
.058
.079
.093
.125
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.156
.200
.234
.312
3,970
6,620
9,270
15,880
0.44
0.73
1.03
1.82
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.142
.142
.165
.156
.175
.175
.175
.200
.200
2,210
2,210
3,750
3,970
4,080
4,080
5,080
6,620
6,620
.19
.22
.33
.38
.40
.44
.52
.60
.68
NON-STANDARD
ANSI
Chain
No.
410(43)(65)
415(42)
415H
420
423
428
428H
520
530
Pitch
P
12
12
12
12
12
12
12
58
58
Roller
Width
Dia.
W
D
.125
.187
.187
.250
.250
.312
.312
.250
.375
Riv. End
to Center
Line
A
.305
.305
.305
.305
.335
.335
.335
.400
.400
.182
.212
.299
.328
.285
.361
.406
.371
.444
Dimensions In Inches
Conn. End
Link Plate
to Center
Line
Height
Thickness
B
H
T
.226
.256
.299
.328
.328
.361
.406
.371
.444
.390
.390
.451
.457
.456
.456
.456
.594
.594
.040
.040
.058
.058
.058
.058
.079
.079
.079
www.alliedlocke.com
11
Roller
ANSI
Chain
No.
Pitch
P
Width
W
Dia.
D
04B-1
05B-1
06B-1
08B-1
10B-1
12B-1
16B-1
20B-1
24B-1
32B-1
06B-2
08B-2
10B-2
12B-2
16B-2
20B-2
24B-2
06B-3
08B-3
10B-3
12B-3
16B-3
20B-3
.236
.315
38
12
58
34
1
114
112
2
38
12
58
34
1
114
112
38
12
58
34
1
114
.110
.118
.225
.305
.380
.460
.670
.770
1.000
1.220
.225
.305
.380
.460
.670
.770
1.000
.225
.305
.380
.460
.670
.770
.157
.197
.250
.335
.400
.475
.625
.750
1.000
1.150
.250
.335
.400
.475
.625
.750
1.000
.250
.335
.400
.475
.625
.750
12
Dimensions In Inches
Riv. End
Conn. End
Link Plate
to Center
to Center
Line
Line
Height
Thickness
A
B
H
T
.124
.152
.253
.321
.385
.440
.702
.786
1.059
1.327
.453
.606
.717
.833
1.326
1.493
1.989
.655
.868
1.044
1.215
1.959
2.216
.179
.189
.291
.361
.440
.483
.819
.955
1.256
1.556
.488
.642
.776
.873
1.418
1.670
2.219
.690
.908
1.103
1.254
2.058
2.413
.198
.280
.325
.465
.580
.635
.830
1.040
1.315
1.662
.325
.465
.580
.635
.830
1.040
1.315
.325
.465
.580
.635
.830
1.040
.024
.030
.050
.058
.067
.073
.157
.175
.219
.275
.050
.058
.067
.073
.157
.175
.219
.050
.058
.067
.073
.157
.175
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.072
.091
.129
.175
.200
.225
.326
.401
.576
.703
.129
.175
.200
.225
.326
.401
.576
.129
.175
.200
.225
.326
.401
730
1,150
2,250
4,080
5,850
7,060
15,880
22,050
36,830
57,330
4,190
8,160
11,680
14,120
31,980
44,100
64,390
6,620
12,130
17,640
21,170
47,410
66,150
0.09
0.11
0.28
0.44
0.62
0.81
1.79
2.43
4.47
6.59
0.50
0.87
1.22
1.61
3.54
4.81
8.86
0.74
1.31
1.81
2.41
5.30
7.22
DOUBLE PITCH
ROLLER CHAIN
DRIVE SERIES
Roller
ANSI
Chain
No.
Pitch
P
Width
W
Dia.
D
A2040
A2050
A2060
A2080
1
114
112
2
.312
.375
.500
.625
.312
.400
.469
.625
CONVEYOR SERIES
ANSI
Chain
No.
.321
.399
.497
.725
.368
.455
.551
.873
.475
.594
.712
.950
.058
.079
.093
.157
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.156
.200
.234
.312
3,970
6,620
9,270
12,460
0.28
0.46
0.64
1.24
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
Standard Roller
Oversize Roller
Roller
Pitch
P
Dimensions In Inches
Riv. End
Conn. End
Link Plate
to Center
to Center
Line
Line
Height
Thickness
A
B
H
T
Dimensions In Inches
Riv. End
Conn. End
Link Plate
to Center
to Center
Line
Line
Height
Thickness
A
B
H
T
Width
W
Dia.
D
.312
.375
.500
.500
.625
.750
1.000
1.250
.312
.400
.469
.469
.625
.750
.875
1.125
.321
.399
.497
.570
.720
.845
1.066
1.339
.368
.455
.551
.625
.873
1.002
1.259
1.536
.475
.594
.712
.712
.950
1.188
1.425
1.901
.058
.079
.093
.125
.157
.189
.219
.281
.156
.200
.234
.234
.312
.375
.437
.563
3,970
6,620
9,270
12,130
19,850
30,870
36,390
61,740
0.32
0.54
0.76
0.95
1.60
2.46
3.48
5.75
.312
.375
.500
.625
.750
1.000
1.250
.625
.750
.875
1.125
1.562
1.751
2.251
.321
.399
.570
.720
.845
1.066
1.339
.368
.455
.625
.873
1.002
1.259
1.536
.475
.594
.712
.950
1.188
1.425
1.901
.058
.079
.125
.157
.189
.219
.281
.156
.200
.234
.312
.375
.437
.563
3,970
6,620
12,130
19,850
30,870
36,390
61,740
0.56
0.85
1.42
2.31
3.95
5.44
8.79
1
114
112
112
2
212
3
4
1
114
112
2
212
3
4
13
SOLID BUSHED/
SOLID ROLLER CHAIN
ANSI
Chain
No.
40
50
60
80
100
120
140
160
60H
80H
100H
40-2
50-2
60-2
80-2
C2060H
C2080H
Roller
Pitch
P
Width
W
Dia.
D
12
.312
.375
.500
.625
.750
1.000
1.000
1.250
.500
.625
.750
.312
.375
.500
.625
.500
.625
.312
.400
.469
.625
.750
.875
1.000
1.125
.469
.625
.750
.312
.400
.469
.625
.469
.625
58
34
1
114
112
134
2
34
1
114
12
58
34
1
112
2
Dimensions In Inches
Riv. End
Conn. End
Link Plate
to Center
to Center
Line
Line
Height
Thickness
A
B
H
T
.321
.399
.497
.645
.789
.983
1.066
1.282
.570
.720
.845
.606
.752
.945
1.220
.570
.720
.368
.455
.551
.724
.941
1.219
1.259
1.469
.625
.783
1.002
.661
.807
1.000
1.303
.625
.873
.475
.594
.712
.950
1.188
1.425
1.663
1.901
.712
.950
1.188
.475
.594
.712
.950
.712
.950
.058
.079
.093
.125
.157
.189
.219
.255
.125
.157
.189
.058
.079
.093
.125
.125
.157
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.156
.200
.234
.312
.375
.437
.500
.563
.234
.312
.375
.156
.200
.234
.312
.234
.312
3,970
6,620
9,270
16,540
25,360
32,640
45,210
57,780
12,130
19,850
30,870
7,500
13,230
18,530
33,080
12,130
19,850
0.42
0.68
0.97
1.71
2.65
3.79
4.96
6.32
1.16
2.00
3.02
0.82
1.34
1.93
3.39
0.95
1.60
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
ANSI
Chain
No.
25 NP
35 NP
40 NP
41 NP
410(43)NP
50 NP
60 NP
80 NP
100 NP
35-2 NP
40-2 NP
50-2 NP
60-2 NP
80-2 NP
A2040 NP
A2050 NP
A2060 NP
C2040 NP
C2050 NP
C2060H NP
C2080H NP
Roller
Pitch
P
14
38
12
12
12
58
34
1
114
38
12
58
34
1
1
114
112
1
114
112
2
Width
W
Dia.
D
.125
.187
.312
.250
.125
.375
.500
.625
.750
.187
.312
.375
.500
.625
.312
.375
.500
.312
.375
.500
.625
.130
.200
.312
.306
.305
.400
.469
.625
.750
.200
.312
.400
.469
.625
.312
.400
.469
.312
.400
.469
.625
Dimensions In Inches
Riv. End
Conn. End
Link Plate
to Center
to Center
Line
Line
Height
Thickness
A
B
H
T
.153
.228
.321
.261
.182
.399
.497
.645
.789
.438
.606
.752
.945
1.220
.321
.399
.497
.321
.399
.570
.720
.189
.276
.368
.314
.226
.455
.551
.724
.941
.468
.661
.807
1.000
1.303
.368
.455
.551
.368
.455
.625
.873
.228
.356
.475
.390
.390
.594
.712
.950
1.188
.356
.475
.594
.712
.950
.475
.594
.712
.475
.594
.712
.950
.029
.050
.058
.050
.040
.079
.093
.125
.157
.050
.058
.079
.093
.125
.058
.079
.093
.058
.079
.125
.157
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.091
.141
.156
.141
.142
.200
.234
.312
.375
.141
.156
.200
.234
.312
.156
.200
.234
.156
.200
.234
.312
930
2,320
3,970
2,760
2,210
6,620
9,270
16,540
25,360
4,640
7,500
13,230
18,530
33,080
3,970
6,620
9,270
3,970
6,620
12,130
19,850
0.09
0.22
0.42
0.28
0.19
0.68
0.97
1.71
2.65
0.42
0.82
1.34
1.93
3.39
0.28
0.46
0.64
0.32
0.54
0.95
1.60
15
ANSI
Chain
No.
40 AC
50 AC
60 AC
80 AC
100 AC
A2040 AC
A2050 AC
C2040 AC
C2042 AC
C2050 AC
C2052 AC
C2060H AC
C2062H AC
Roller
Pitch
P
12
58
34
1
114
1
114
1
1
114
114
112
112
Width
W
Dia.
D
.312
.375
.500
.625
.750
.312
.375
.312
.312
.375
.375
.500
.500
.312
.400
.469
.625
.750
.312
.400
.312
.625
.400
.750
.469
.875
Dimensions In Inches
Riv.
Conn.
End to
End to
Center Line Center Line
A
B
.321
.399
.497
.645
.789
.321
.399
.321
.321
.399
.399
.570
.570
.368
.455
.551
.724
.941
.368
.455
.368
.368
.455
.455
.625
.625
Pin
Dia.
E
Link Plate
Height
Thickness
H
T
.156
.200
.234
.312
.375
.156
.200
.156
.156
.200
.200
.234
.234
.475
.594
.712
.950
1.188
.475
.594
.475
.475
.594
.594
.712
.712
.058
.079
.093
.125
.157
.058
.079
.058
.058
.079
.079
.125
.125
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
3,970
6,620
9,270
16,540
25,360
3,970
6,620
3,970
3,970
6,620
6,620
12,130
12,130
0.42
0.68
0.97
1.71
2.65
0.28
0.46
0.32
0.56
0.54
0.85
0.95
1.42
304 STAINLESS
STEEL CHAIN
Stainless roller chain is made of 304 stainless steel
having superior corrosion and heat resistance
properties. Stainless steel attachment chain is also
available.
ANSI
Chain
No.
25 SS
35 SS
40 SS
41 SS
50 SS
60 SS
80 SS
100 SS
35-2 SS
40-2 SS
50-2 SS
60-2 SS
80-2 SS
A2040 SS
A2050 SS
A2060 SS
C2040 SS
C2042 SS
C2050 SS
C2052 SS
C2060 SS
C2060H SS
C2062H SS
C2080H SS
C2082H SS
Roller
Pitch
P
14
38
12
12
58
34
1
114
38
12
58
34
1
1
114
112
1
1
114
114
112
112
112
2
2
Width
W
Dia.
D
.125
.187
.312
.250
.375
.500
.625
.750
.187
.312
.375
.500
.625
.312
.375
.500
.312
.312
.375
.375
.500
.500
.500
.625
.625
.130
.200
.312
.306
.400
.469
.625
.750
.200
.312
.400
.469
.625
.312
.400
.469
.312
.625
.400
.750
.469
.469
.875
.625
1.130
Dimensions In Inches
Riv. End
Conn. End
Link Plate
to Center
to Center
Line
Line
Height
Thickness
A
B
H
T
.153
.228
.321
.261
.399
.497
.645
.789
.438
.606
.752
.945
1.220
.321
.399
.497
.321
.321
.399
.399
.497
.570
.570
.720
.720
.189
.276
.368
.314
.455
.551
.724
.941
.468
.661
.807
1.000
1.303
.368
.455
.551
.368
.368
.455
.455
.551
.625
.625
.873
.873
.228
.356
.475
.390
.594
.712
.950
1.188
.356
.475
.594
.712
.950
.475
.594
.712
.475
.475
.594
.594
.712
.712
.712
.950
.950
.029
.050
.058
.050
.079
.093
.125
.157
.050
.058
.079
.093
.125
.058
.079
.093
.058
.058
.079
.079
.093
.125
.125
.157
.157
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.091
.141
.156
.141
.200
.234
.312
.375
.141
.156
.200
.234
.312
.156
.200
.234
.156
.156
.200
.200
.234
.234
.234
.312
.312
670
1,550
2,760
1,550
4,970
6,620
10,590
18,500
3,400
6,000
9,390
13,540
24,030
2,760
4,970
6,620
2,760
3,970
4,970
4,970
6,620
6,620
6,620
10,590
10,590
0.09
0.22
0.42
0.28
0.68
0.97
1.71
2.80
0.44
0.84
1.40
2.10
3.40
0.32
0.54
0.76
0.32
0.56
0.54
0.85
0.76
0.95
1.42
1.60
2.31
17
ANSI
Chain
No.
35 PHSS
40 PHSS
50 PHSS
60 PHSS
80 PHSS
C2040 PHSS
C2042 PHSS
C2050 PHSS
C2052 PHSS
C2060 PHSS
C2060H PHSS
C2062H PHSS
C2080H PHSS
C2082H PHSS
Roller
Pitch
P
38
12
58
34
1
1
1
114
114
112
112
112
2
2
Width
W
Dia.
D
.187
.312
.375
.500
.625
.312
.312
.375
.375
.500
.500
.500
.625
.625
.200
.312
.400
.469
.625
.312
.625
.400
.750
.469
.469
.875
.625
1.130
Dimensions In Inches
Riv. End
Conn. End
Link Plate
to Center
to Center
Line
Line
Height
Thickness
A
B
H
T
.228
.321
.399
.497
.645
.321
.321
.399
.399
.497
.570
.570
.720
.720
.276
.368
.455
.551
.724
.368
.368
.455
.455
.551
.625
.625
.873
.873
.356
.475
.594
.712
.950
.475
.475
.594
.594
.712
.712
.712
.950
.950
.050
.058
.079
.093
.125
.058
.058
.079
.079
.093
.125
.125
.157
.157
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.041
.156
.200
.234
.312
.156
.156
.200
.200
.234
.234
.234
.312
.312
1,550
2,760
4,970
6,620
10,590
2,760
2,760
4,970
4,970
6,620
6,620
6,620
10,590
10,590
0.22
0.42
0.68
0.97
1.71
0.32
0.56
0.54
0.85
0.76
0.95
1.42
1.60
2.31
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
LEAF CHAIN
AL SERIES
Leaf chain consists of link plates and pins, and is used for suspension, counterweight, and transmission at low speed.
Light duty leaf chain is best suited for applications where chain joints are not articulated frequently. AL series leaf chain pin
link plates have the contour, pitch, and thickness of the pin link plates of the corresponding ANSI standard roller chain.
Dimensions In Inches
ANSI
Chain
No.
AL322
AL422
AL444
AL466
AL522
AL523
AL544
AL566
AL622
AL623
AL644
AL666
AL688
AL822
AL844
AL866
AL888
AL1022
AL1044
AL1066
AL1088
AL1222
AL1244
AL1266
Pitch
P
38
12
12
12
58
58
58
58
34
34
34
34
34
1
1
1
1
114
114
114
114
112
112
112
Lacing
Pin
Length
Link Plate
Height
Thickness
H
T
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
22
22
44
66
22
23
44
66
22
23
44
66
88
22
44
66
88
22
44
66
88
22
44
66
.343
.411
.665
.920
.520
.622
.853
1.188
.609
.667
.985
1.375
1.766
.823
1.320
1.849
2.377
.789
1.627
2.261
2.899
.953
1.910
2.680
.307
.409
.409
.409
.513
.513
.513
.513
.615
.615
.615
.615
.615
.820
.820
.820
.820
1.025
1.025
1.025
1.025
1.230
1.230
1.230
.141
.156
.156
.156
.200
.200
.200
.200
.234
.234
.234
.234
.234
.312
.312
.312
.312
.375
.375
.375
.375
.437
.437
.437
2,320
3,970
7,940
11,910
6,620
6,620
13,230
19,850
9,270
9,270
18,530
18,530
37,050
15,880
31,760
47,630
63,510
22,000
50,720
74,970
101,430
31,700
65,270
97,910
0.14
0.24
0.46
0.69
0.39
0.45
0.77
1.14
0.53
0.60
1.03
1.54
2.05
0.97
1.89
2.82
3.74
1.80
3.15
4.70
6.24
2.39
4.19
6.25
.050
.058
.058
.058
.079
.079
.079
.079
.093
.093
.093
.093
.093
.125
.125
.125
.125
.157
.157
.157
.157
.189
.189
.189
www.alliedlocke.com
19
LEAF CHAIN
BL SERIES
Heavy-duty leaf chain has the contour and pitch of the roller link plates of the equivalent ANSI standard
roller chain, but the side plates have the thickness of the next larger pitch ANSI standard roller chain.
Dimensions In Inches
ANSI
Chain
No.
BL423
BL434
BL444
BL446
BL466
BL522
BL523
BL534
BL544
BL546
BL566
BL622
BL623
BL634
BL644
BL646
BL666
BL822
BL823
BL834
BL844
BL846
BL866
20
Pitch
P
12
12
12
12
12
58
58
58
58
58
58
34
34
34
34
34
34
1
1
1
1
1
1
Lacing
Pin
Length
L
23
34
44
46
66
22
23
34
44
46
66
22
23
34
44
46
66
22
23
34
44
46
66
.603
.770
.854
1.021
1.188
.609
.699
.893
.985
1.180
1.375
.823
.930
1.189
1.320
1.584
1.849
.965
1.134
1.445
1.627
1.922
2.261
Link Plate
Height
Thickness
H
T
.475
.475
.475
.475
.475
.594
.594
.594
.594
.594
.594
.713
.713
.713
.713
.713
.713
.950
.950
.950
.950
.950
.950
.079
.079
.079
.079
.079
.093
.093
.093
.093
.093
.093
.125
.125
.125
.125
.125
.125
.157
.157
.157
.157
.157
.157
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.200
.200
.200
.200
.200
.234
.234
.234
.234
.234
.234
.312
.312
.312
.312
.312
.312
.375
.375
.375
.375
.375
.375
5,960
8,930
11,910
11,910
17,870
9,380
9,380
14,120
18,750
18,750
28,120
14,450
14,450
22,050
29,110
29,110
43,660
23,160
23,160
34,180
46,310
46,310
66,150
0.48
0.67
0.76
0.95
1.14
0.58
0.71
1.00
1.14
1.41
1.69
0.97
1.19
1.65
1.88
2.33
2.79
1.55
1.92
2.66
3.04
3.77
4.52
www.alliedlocke.com
LEAF CHAIN
BL SERIES
Heavy-duty leaf chain has the contour and pitch of the roller link plates of the equivalent ANSI standard
roller chain, but the side plates have the thickness of the next larger pitch ANSI standard roller chain.
Dimensions In Inches
ANSI
Chain
No.
BL1023
BL1034
BL1046
BL1066
BL1088
BL1223
BL1234
BL1244
BL1246
BL1266
BL1434
BL1446
BL1466
BL1623
BL1634
BL1646
BL1666
BL1688
Pitch
P
114
114
114
114
114
112
112
112
112
112
134
134
134
2
2
2
2
2
Lacing
Pin
Length
L
Link Plate
Height
Thickness
H
T
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
23
34
46
66
88
23
34
44
46
66
34
46
66
23
34
46
66
88
1.366
1.744
2.305
2.680
3.419
1.549
1.990
2.212
2.653
3.112
2.231
2.980
3.493
1.703
2.299
3.191
3.785
5.045
1.189
1.189
1.189
1.189
1.189
1.425
1.425
1.425
1.425
1.425
1.663
1.663
1.663
1.898
1.898
1.898
1.898
1.898
.437
.437
.437
.437
.437
.500
.500
.500
.500
.500
.563
.563
.563
.687
.687
.687
.687
.687
33,080
49,620
66,150
99,230
132,300
44,100
66,150
88,200
88,200
132,300
79,380
105,840
158,760
79,300
124,500
158,600
238,300
313,110
3.05
4.23
6.01
7.18
7.49
4.20
5.84
6.66
8.29
9.93
7.86
11.17
13.39
8.17
11.39
16.19
19.31
20.17
.189
.189
.189
.189
.189
.219
.219
.219
.219
.219
.255
.255
.255
.281
.281
.281
.281
.281
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
21
HOIST CHAIN
O-RING CHAIN
CHAIN DETACHERS
Manufactured with special pins of carbon alloy
steel and through hardened, giving these chains a
higher working load capacity and offering additional resistance to fatigue. Hoist chains work well
for extra-capacity and slow speed hoist applications dimensionally equal to standard 50 and 60
ANSI chains, but will give less wear life than the
standard equivalent size.
HOIST CHAIN
SINGLE STRAND
Dimensions In Inches
Riv. End
Conn. End
Link Plate
to Center
to Center
Line
Line
Height
Thickness
A
B
H
T
Roller
ANSI
Chain
No.
Pitch
P
Width
W
Dia.
D
58
.375
.500
.400
.469
50 HOIST (625)
60 HOIST (750)
34
.397
.497
.455
.551
.594
.712
.079
.093
Pin
Dia.
E
Avg.
Ultimate
Strength
Lbs.
Avg.
Weight
Lbs./Ft.
.200
.234
7,500
10,500
.68
.97
Avg.
Weight
Lbs./Ft.
0.45
0.73
1.09
1.90
O-RING CHAIN
Dimensions In Inches
ANSI
Chain
No.
40
50
60
80
F
(max.)
Avg.
Ultimate
Strength
Lbs.
12
.313
.375
.500
.625
.312
.400
.469
.625
.156
.200
.234
.312
.788
.921
1.134
1.442
.788
.933
1.174
1.532
.059
.078
.094
.126
.472
.591
.713
.949
.409
.512
.614
.819
4,080
6,770
9,640
16,320
Pitch
58
34
Roller
Pin
Link Plate
CHAIN DETACHERS
Model
Chain Sizes
CB 35-50
CB 60-100
#35 to #50
#60 to #100
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
22
CITRUS CHAIN
SORTING CHAIN
CATERPILLAR CHAIN
ANSI
No.
Attachment
C2060H
D-5 (1 215 8)
1.500
C2060H
D-5 (9 1615 8)
1.500
(1 215 8)
C2060H SS
D-5
C2060H SS
D-5 (9 1615 8)
Weight
Lbs/Ft.
1.626
.500
.310
1.60
1.626
.563
.310
1.62
1.500
1.626
.500
.310
1.60
1.500
1.626
.563
.310
1.62
ATTACHMENT
Hole Diam.
Weight
Lbs./Ft.
C2060H
G1
1.500
.312
.96
ANSI No.
Description
Dimensions In Inches
Attach.
Pitch
Length
P
X
Attach.
Height
Y
Weight
Lbs/Ft.
2.000
3.888
2.139
7.30
2.000
3.876
2.391
8.30
2.000
5.129
3.021
8.92
2.000
5.129
3.021
ATTACHMENTS
STANDARD BENT,
ONE SIDE/TWO SIDES
ANSI
Chain
No.
35*
40
50
60
80
100**
120**
140**
160**
Pitch
P
38
12
58
34
1
114
112
134
2
A-1
From Hole
From
C.L. to
End to
Chain C.L. Chain C.L.
A
F
Dimensions In Inches
K-1
From
From
C.L. to
End to
Chain C.L. Chain C.L.
A
F
Hole
Dia.
D
Attach
Extension
Width
H
Thickness
T
.375
.500
.625
.750
1.000
.516
.688
.969
1.094
1.548
.375
.500
.625
.750
1.000
.516
.688
.969
1.094
1.548
.250
.312
.406
.469
.625
.109
.140
.203
.203
.265
.312
.375
.562
.625
.750
.050
.058
.079
.093
.125
1.250
1.501
1.750
2.000
1.694
2.088
2.437
2.812
1.250
1.501
1.750
2.000
1.694
2.088
2.437
2.812
.781
.906
1.125
1.250
.328
.390
.448
.516
1.000
1.126
1.375
1.500
.157
.189
.218
.250
24
From
Top to
Pin C.L.
C
ATTACHMENTS
STANDARD STRAIGHT,
ONE SIDE, TWO SIDES
EXTENDED PIN
Dimensions In Inches
ANSI
Chain
No.
From Hole
C.L. to
Pin C.L.
C
Hole
Dia.
D
From
Top to
Pin C.L.
F
Extension
Width
H
Thickness
T
.375
.500
.625
.719
.969
.109
.140
.203
.203
.265
.531
.687
.963
1.031
1.339
.312
.375
.562
.625
.750
.050
.058
.079
.093
.125
114
112
134
2
1.250
1.439
1.750
2.000
.328
.390
.448
.516
1.649
1.959
2.437
2.750
1.000
1.126
1.375
1.500
.157
.189
.218
.250
Pitch
P
38
35*
40
50
60
80
12
58
34
100
120
140
160
*Chain is rollerless.
D-1, Single Pin
One Side
Dimensions In Inches
Pin
Pitch
Dia.
P
D
38
Pin
Projection
L
58
.141
.156
.200
.234
.312
.375
.375
.469
.562
.750
114
112
134
2
.375
.437
.500
.562
.938
1.126
1.312
1.500
12
34
*Chain is rollerless.
www.alliedlocke.com
25
ATTACHMENTS
WIDE CONTOUR
STRAIGHT, ONE SIDE
WM-35-1, One Side
One Hole
WM-35-2, One Side
Two Holes
WM-1
WM-35-1
WM-35-2
Two Sides
One Hole
Two Sides
Two Holes
WM-2
Dimensions In Inches
ANSI
Chain
No.
From Hole
C.L. to
Pin C.L.
C
Hole
Dia.
D
From
Top to
Pin C.L.
F
Extension
Width
H
Thickness
T
38
12
.375
.500
.625
.109
.140
.203
.578
.681
.969
.722
.910
1.131
.050
.058
.079
34
.719
.969
.203
.265
1.028
1.349
1.428
1.916
.093
.125
Pitch
P
35*
40
50
58
60
80
*Chain is rollerless.
WA-2
ANSI
Chain
No.
Pitch
P
35*
40
50
38
12
60
80
34
58
WK-2
Dimensions In Inches
From
Top to
Pin C.L.
C
Hole
Dia.
D
Extension
Width
H
Thickness
T
.375
.500
.625
.250
.312
.406
.109
.140
.203
.722
.910
1.131
.050
.058
.079
.750
1.000
.469
.625
.203
.265
1.428
1.916
.093
.125
From Hole
C.L. to
Chain C.L.
A
*Chain is rollerless.
26
www.alliedlocke.com
ATTACHMENTS
DOUBLE PITCH BENT,
ONE SIDE/TWO SIDES
BENT, ONE SIDE
A-1
A-2
Dimensions In Inches
ANSI
Chain No.
Pitch
P
From Hole
C.L. to
Chain C.L.
A
From Hole
C.L. to
Hole C.L.
B
From
Top to
Pin C.L.
C
Hole
Dia.
D
From
End to
Chain C.L.
F*
Extension
Width
H
Thickness
T
C2042
C2052
C2062H
1
114
112
.500
.625
.844
.375
.469
.562
.359
.438
.578
.140
.203
.203
.742
.945
1.204
.750
1.000
1.126
.058
.079
.125
C2082H
C2102H
C2122H
C2162H
2
212
3
4
1.094
1.312
1.562
2.063
.750
.938
1.126
1.501
.750
.922
1.094
1.439
.265
.328
.390
.521
1.516
1.966
2.391
3.159
1.501
1.876
2.251
2.966
.157
.189
.219
.281
Large
Size
Roller
C2040
C2050
C2060H
C2080H
C2100H*
C2120H*
C2160H*
Standard
Roller
C2042
C2052
C2062H
1
114
112
.500
.625
.844
.375
.469
.562
.359
.438
.578
.140
.203
.203
.742
.945
1.204
.750
1.000
1.126
.058
.079
.125
C2080H
C2100H*
C2120H*
C2160H*
C2082H
C2102H
C2122H
C2162H
2
212
3
4
1.094
1.312
1.562
2.063
.750
.938
1.126
1.501
.750
.922
1.094
1.439
.265
.328
.390
.521
1.516
1.966
2.391
3.159
1.501
1.876
2.251
2.966
.157
.189
.219
.281
www.alliedlocke.com
27
ATTACHMENTS
DOUBLE PITCH
STRAIGHT, ONE SIDE
ANSI
Chain No.
Standard
Roller
C2040
C2050
C2060H
C2080H
C2100H
C2120H
C2160H
28
Large
Size
Roller
C2042
C2052
C2062H
C2082H
C2102H
C2122H
C2162H
Pitch
P
1
114
112
2
212
3
4
Dimensions In Inches
M-35-1
M-35-2
From Hole
From Hole
From
C.L. to
Hole
C.L. to
C.L. to
Pin C.L.
Dia.
Hole C.L.
Pin C.L.
C
D
B
C
.438
.203
.375
.531
.562
.250
.469
.625
.688
.328
.562
.750
.875
.390
.750
1.000
1.126
.516
.938
1.250
1.312
.578
1.126
1.470
1.751
.766
1.501
2.001
Hole
Dia.
D
.140
.203
.203
.265
.328
.390
.521
From
Top to
Pin C.L.
F
.759
.969
1.172
1.501
1.985
2.361
3.027
Extension
Width
H
.750
1.000
1.126
1.501
1.876
2.251
2.966
Thickness
T
.058
.079
.125
.157
.189
.219
.281
ATTACHMENTS
DOUBLE PITCH STRAIGHT,
TWO SIDES EXTENDED PIN
STRAIGHT, TWO SIDES
M-1, Two Sides
One Hole
M-2, Two Sides
Two Holes
Dimensions In Inches
ANSI
Chain No.
Large
Standard
Size
Roller
Roller
C2040
C2042
C2050
C2052
C2060H
C2062H
C2080H
C2082H
C2100H
C2102H
C2120H
C2122H
C2160H
C2162H
Pitch
P
1
114
112
2
212
3
4
M-1
From Hole
C.L. to
Pin C.L.
C
.438
.562
.688
.875
1.126
1.312
1.751
Hole
Dia.
D
.203
.250
.328
.390
.516
.578
.766
From Hole
C.L. to
Hole C.L.
B
.375
.469
.562
.750
.938
1.126
1.501
M-2
From
C.L. to
Pin C.L.
C
.531
.625
.750
1.000
1.250
1.470
2.001
Hole
Dia.
D
.140
.203
.203
.265
.328
.390
.521
From
Top to
Pin C.L.
F
.759
.969
1.172
1.501
1.985
2.361
3.027
Extension
Width
H
.750
1.000
1.126
1.501
1.876
2.251
2.966
Thickness
T
.058
.079
.125
.157
.189
.219
.281
EXTENDED PIN
Dimensions In Inches
ANSI
Chain No.
Large
Standard
Size
Roller
Roller
Pitch
P
Pin
Dia.
D
Pin
Projection
L
C2040
C2050
C2060H
C2080H
C2100H
C2120H
C2160H
1
114
112
2
212
3
4
.156
.200
.234
.312
.375
.437
.563
.375
.469
.562
.750
.930
1.126
1.501
C2042
C2052
C2062H
C2082H
C2102H
C2122H
C2162H
29
GENERAL PRACTICES
Fig. 1
Drive Arrangements
Solution No. 1: (middle diagram) Make one shaft position adjustable, to allow wear compensation.
Before considering individual drive components, it is necessary to select the overall drive
arrangement. The accompanying diagrams show
various arrangements, starting with the most desirable horizontal setup (Figure 1).
For maximum chain life, provisions should be
made to take up slack caused by normal chain
wear.
Solution No. 2: (lower diagram) Add idler sprocket for wear compensation.
www.alliedlocke.com
DRIVE
ARRANGEMENTS
The following depictions are arrangements that
may be necessary due to application realities (restricted installation space, xed positions of driving and driven members, etc.). Each setup has
its drawbacks, which should be recognized.
Fig. 2
Fig. 2
Setup: Inclined; slack lower strand.
Problem: Possible insufcient engagement at
lower sprocket.
Solution: Increase initial chain tension.
Fig. 3
Fig. 3
Setup: Horizontal; slack upper strand; sprockets
far apart.
Problem: Upper strand may drag on lower.
Solution: Support slack strand with idler sprockets.
Fig. 4
Fig. 4
Setup: Horizontal; high-speed drive; sprockets far
apart.
Problem: Slack strand may pulsate or whip.
Solution: Dampen whip with idler sprockets.
Fig. 5
Fig. 5
Setup: Horizontal; slack upper strand.
Problem: Drive sprocket may kick out of engagement.
Solution: Increase chain wrap and tension with
idler sprocket.
Fig. 6
Fig. 6
Setup: Vertical; small sprocket at bottom.
Problem: Through normal wear and elongation,
chain disengages from bottom sprocket.
Solution: Increase chain wrap and tension with
idler sprocket.
31
Stress Corrosion
Fatigue Failure
Bushing Fatigue
32
Galling
(Abnormal Wear)
Pin Galling
Importance of Lubrication
One of the most important, but
overlooked, factors affecting chain
life is proper lubrication. Besides
minimizing metal-to-metal contact,
lubrication provides cooling and impact damping at high speeds. It also
reduces corrosion and carries away
foreign matter, which is vital in abrasive environments.
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
33
Lubrication plays an important role for chain life because chain wear and its stretch results from friction
in the area between pin and bushing.
Proper lubrication is necessary to reduce metal to
metal contact and interference at chain joints.
Method and amount of lubrication
Type
Method
Amount
Drip lubrication
Use simple casing and apply oil drops
from a drip cup.
Forced lubrication
Oil pump is used to force continuous
spray of oil after cooling to chain within a
leak-proof casing. No. of spray oil holes
should be N1 if the number of chain
strand is N.
In all types of lubrication, roller chain should be cleaned periodically using light oil or gasoline.
In order to see if lubrication is performed satisfactorily, remove chain from drive and check its pin and
bushing. If pin and bushing show aking or being colored to red or dark brown, poor lubrication
generally exists.
34
www.alliedlocke.com
Excessive Wear
Normal Wear
Example 2001.8%
N
35
Possible Causes
What To Do
Excessive noise
I
I
I
I
I
I
Chain vibration
I Misalignment
I Inadequate lubrication
I Chain or sprocket corrosion
I Lubricate properly
I Install anti-corrosive chain or sprockets
I
I
I
I
I
I
I
I
Misalignment of sprocket
Loose casings or bearings
Too little or too much slack
Chain and/or sprocket wear
Inadequate lubrication or no lubrication
Chain pitch size too large
Misalignment
Inadequate lubrication
Corrosion
Excessive load
36
I
I
I
I
I
I
www.alliedlocke.com
AGRICULTURAL
CHAIN
38
All agricultural roller chain manufactured in the United States with solid roller & solid bushings
AGRICULTURAL
ROLLER CHAIN
DRIVE CHAINA550, A555, A557 & A620
Chain Size
DRIVE SERIES A
A550
A555
A557
A620
Roller
Pitch
P
1.63
1.63
1.63
1.654
CONVEYOR SERIES CA
CA550
1.63
CA550HD
1.63
CA555
1.63
CA557
1.63
CA620
1.654
W
Width
51 64
1 2
51 64
63 64
51 64
D
Diam.
.656
.656
.700
.696
.656
51 64
21 32
63 64
.656
.700
.696
1 2
51 64
Overall
Width
C
Riv.
1 3 8
1 11 64
1 15 32
1 41 64
Cott.
1 9 16
1 1 4
1 19 32
1 27 32
1 3 8
1 33 64
1 11 64
1 15 32
1 41 64
1 9 16
1 19 32
1 1 4
1 19 32
1 27 32
Link Plate
Height
Thick
H
T
3 4
.105
3 4
.125
29 32
.125
3 4
.125
3 4
13 16
3 4
29 32
3 4
.105
.120
.125
.125
.125
Pin
Diam.
E
.281
.281
.315
.281
Adv.
Ultimate
Strength
Lbs.
11,250
11,250
16,500
12,000
.281
.316
.281
.315
.281
11,250
15,250
11,250
16,500
12,000
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
All agricultural roller chain manufactured in the United States with solid roller & solid bushings
39
AGRICULTURAL ROLLER
CHAIN ATTACHMENTS
A1-A1S-A1W-A29
Dimensions
Chain Size
Attachment No.
27 64
M
7 8
17 64
.105
CA550
A1
1 31 64
CA620
A1
1 31 64
1 9 16
29 64
7 8
17 64
.125
CA620
A1S
1 31 64
1 9 16
29 64
7 8
21 64
.125
CA620
*A1W
1 5 8
2 3 32
5 8
2 3 8
25 64
.125
1 47 64
9 16
1 1 8
25 64
.125
CA557
A29
*Weld on attachment
A1D
Dimensions
Chain Size
Attachment No.
CA550
A1D
1 15 32
1 7 8
1 4
3 4
11 32
.105
Chain Size
Attachment No.
CA550
A4
1 15 32
2 1 8
5 8
1 1 2
13 32
.187
CA557
A4
1 1 2
2 5 32
5 8
1 1 2
13 32
.187
A4
Dimensions
K
A12
Dimensions
Chain Size
Attachment No.
CA620
A12
5 8
1 3 8
2 1 2
17 32
13 16
17 64
.125
All agricultural roller chain manufactured in the United States with solid roller & solid bushings
AGRICULTURAL ROLLER
CHAIN ATTACHMENTS
A18-A19-A25-A27-A29
Dimensions
Chain Size
Attachment No.
CA550
A18
1 1 16
1 17 32
1 2
7 8
17 64
.105
A550
A19*
1 13 32
1 2
7 8
17 64
.105
1 19 32
1 2
7 8
17 64
.105
1 2
7 8
21 64
.105
CA550
A19*
A550
A25*
1 13 32
CA550
A27
1 1 16
1 13 32
1 2
7 8
21 64
.105
1 13 32
1 2
7 8
25 64
.105
CA550
A29
AH
Dimensions
Chain Size
Attachment No.
CA550
AH
1 15 32
1 7 8
1 4
3 4
11 32
.105
AHM
Dimensions
Chain Size
Attachment No.
CA550
AHM
1 15 32
1 7 8
1 4
11 32
3 4
.105
All agricultural roller chain manufactured in the United States with solid roller & solid bushings
41
AGRICULTURAL ROLLER
CHAIN ATTACHMENTS
C5E
Att.
No.
C5E
C5E
Chain
No.
CA550
CA555
C
1 15 64
1 3 64
R
15
15
S
2 1 4
2 1 4
T
.105
.125
Chain
No.
CA550
1 31 64
15
2 1 4
.105
Chain
No.
CA555
1 3 64
15
2 5 8
.125
C5EB
Att.
No.
C5EB
C6E
Att.
No.
C6E
All agricultural roller chain manufactured in the United States with solid roller & solid bushings
AGRICULTURAL ROLLER
CHAIN ATTACHMENTS
C11E, C14E
Att.
No.
Chain
No.
C11E
CA550
1 17 64
C14E
CA620
1 17 32
Chain
No.
CA550
1 17 64
Chain
No.
CA550
1 17 64
CA620
1 17 32
17
2 1 2
.105
25
2 21 32
.125
2 3 8
.105
15
3 5 8
.105
15
3 5 8
.125
C12E
Att.
No.
C12E
C13E
Att.
No.
C13E
43
AGRICULTURAL ROLLER
CHAIN ATTACHMENTS
Att.
No.
C17E
C19E
CPE
Chain
No.
CA550
CA550
CA550
C
117 64
1 17 64
1 17 64
R
15
15
20
S
3
2
35
2 64
T
.105
.105
.105
Chain
No.
CA620
1 17 32
221 2
2 5 16
.125
C30E
Att.
No.
C30E
IMPORT
D1
Att.
No.
Chain
No.
D-1
CA550
Dimension (inches)
K
M
2
1 2
All agricultural roller chain manufactured in the United States with solid roller & solid bushings
AGRICULTURAL ROLLER
CHAIN ATTACHMENTS
F1
Att.
No.
Chain
No.
F1
CA550
2 7 16
3 7 16
1 1 2
1 1 4
17 64
3 4
.105
F4-F4S-F4A
Att.
No.
F4
F4A
F4S
Chain
No.
CA550
CA550
CA550
1 7 8
2 11 16
1 11 16
1 29 64
21 64
1 7 32
1 7 8
2 1 8
2 11 16
2 31 32
1 11 16
1 11 16
1 29 64
1 29 64
13 32
1 7 32
1 13 32
.105
.105
.105
13 32
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
All agricultural roller chain manufactured in the United States with solid roller & solid bushings
45
AGRICULTURAL ROLLER
CHAIN ATTACHMENTS
F5-F5S-F14-F14S-F17
Att.
No.
Chain
No.
4
4
4
1 1 4
51 64
15 64
5 8
1 1 4
1 1 4
51 64
17 64
5 8
51 64
21 64
5 8
.105
.105
.105
51 64
13 32
5 8
.105
CA550
CA550
CA550
3 1 8
F14S
CA550
3 1 8
1 1 4
F16
CA550
2 1 2
3 3 4
1 3 8
29 32
9 32
9 16
.105
CA550
4 1 2
5 37 64
1 5 8
1 3 8
25 64
13 16
.105
F5
F5S
F14
F17
3 1 8
3 1 8
G17-2
Att.
No.
Chain
No.
G17-2
CA550
2 1 2
3 21 64
3 4
1 1 4
9 32
1 2
.105
46
Att.
No.
Chain
No.
G50A
CA550
1 9 16
2 5 32
5 8
3 4
25 64
3 32
.125
All agricultural roller chain manufactured in the United States with solid roller & solid bushings
AGRICULTURAL ROLLER
CHAIN ATTACHMENTS
K1
Att.
No.
Chain
No.
2 21 32
27 64
7 8
17 64
K1
CA550
CA620
2
2 15 32
3 5 32
29 64
7 8
17 64
.105
.125
K1S
CA620
2 15 32
3 5 32
29 64
7 8
21 64
.125
2 29 32
9 16
1 1 8
25 64
.125
K29
CA557
K12
Att.
No.
K12
Chain
No.
CA620
5 8
2 3 4
5 1 8
15 16
7 8
17 64
.125
Att.
No.
Chain
No.
K18
CA550
2 1 8
2 13 16
1 2
7 8
17 64
.105
K19
A550*
CA550*
2
2
2 13 16
3 1 16
1 2
7 8
17 64
1 2
7 8
17 64
.105
.105
K25
A550*
2 13 16
1 2
7 8
21 64
.105
K27
CA550
2 1 8
2 13 16
1 2
7 8
21 64
.105
K27S
CA550
A557
2 1 8
2 1 4
2 13 16
3 1 8
1 2
7 8
25 64
9 16
1 1 8
33 64
.105
.125
K29
CA550
2 13 16
1 2
7 8
25 64
.105
All agricultural roller chain manufactured in the United States with solid roller & solid bushings
47
AGRICULTURAL ROLLER
CHAIN ATTACHMENTS
K39-K39M-K35-K35M
Att.
No.
Chain
No.
K39
A550
2.00
2.813
.474
2.38
.328
.105
K39M
A550
2.00
2.813
.484
2.38
.390
.105
K35
A557
2.00
2.894
.555
2.67
.343
.125
K35M
A557
2.00
2.894
.555
2.67
.406
.125
K39
A557
2.25
2.91
.555
2.67
.343
.125
K39M
A557
2.25
3.110
.555
2.670
.390
.125
Chain
No.
CA550
1 9 16
M25
Att.
No.
M25
.808
1.183
7 8
21 64
.105
U16
48
Att.
No.
Chain
No.
N1
N2
U16
CA557
1.187
1 9 32
1 23 32
19 32
2 5 8
21 64
25 64
.120
All agricultural roller chain manufactured in the United States with solid roller & solid bushings
AGRICULTURAL
ROLLER CHAIN
ASSEMBLIES, APRONS, FLIGHTS & SLATS
Allied-Locke maintains complete stocks on all standard Corn Picker Gathering Chains and Flight Assemblies. Ask for
our separate catalog page listing all Corn Head Gathering Chains. In addition, our engineering department will assist
you in developing new designs for any special or experimental applications.
SLAT
ALLIED-LOCKE
Steel Pintle Chain
Allied-Locke Steel Pintle Chain is designed
for dependability, quality, and economy. The
Allied-Locke Steel Pintle Chain is well
suited for a wide range of applications, such
as salt-sand-fertilizer spreaders, bunk feeders, hay handling equipment and other similar conveying systems.
Allied-Locke Steel Pintle Chains feature
all heat treated parts with quad staked pins.
The open barrel construction minimizes pin
surface contact with the barrel, eliminating
freezing due to corrosion. The open barrel
design eliminates material build up in the
roots of sprockets. This assures smoother
operation, uniform link wear, greater resistance to fatigue and longer service life.
www.alliedlocke.com
Chain Size
Links
Per 10
Wt.
Per 10
Min. Avg.
Tensile
Strength
AL662
72
10.5 lbs.
8,500 lbs.
AL667H
AL667X
AL667XH
AL88K
AL88XH
AL58
52
53
53
46
46
30
11.7 lbs.
18.6 lbs.
28.0 lbs.
23.0 lbs.
33.2 lbs.
55.0 lbs.
9,500 lbs.
15,000 lbs.
26,000 lbs.
20,000 lbs.
30,000 lbs.
50,000 lbs.
Pitch
P
Overall
Width
B
Inside
Width
C
Pin Dia.
D
Height
H
Thickness
T
Connector
Length
A
B
1.664
1 5 8
29 32
.281
.720
.125
.797
.883
2.313
1 47 64
.312
.875
.125
.891
.998
2.250
1 61 64
1 1 16
.437
.937
.170
1.010
1.140
2.250
2 5 16
1 5 64
.469
1.062
.224
1.200
1.340
2.609
2 1 8
1 5 64
.437
1.062
.200
1.090
1.270
2.609
4.000
2 41 64
1 1 4
3 23 64
2 1 32
.500
.625
1.125
1.500
.250
.310
1.350
1.870
1.520
2.090
51
Attachment
Chain No.
AS
AS
AS
AS
AS
AS
AES
AES
AES
AES
AES
AE
AC
AL662
AL667H
AL667X
AL667XH
AL88K
AL88XH
AL662
AL667H
AL667X
AL667XH
AL88XH
AL667XH
AL88XH
1 3 8
2 1 32
2 1 32
2 1 32
2 1 32
2 1 32
1 3 8
2 1 32
2 1 32
2 1 32
2 1 32
2 1 32
2 1 32
17 64
3 16
1 1 8
1 1 8
1 1 4
1 1 4
1 1 4
15 16
1 1 8
1 1 8
1 1 4
1 1 4
1 1 4
1 1 4
21 64
1 4
21 64
5 16
25 64
3 8
25 64
3 8
25 64
3 8
21 64
3 16
25 64
1 4
25 64
5 16
29 64
3 8
29 64
3 8
21 64
3 8
9 16
3 8
Chain No.
AK1
AL662
7 16
2 15 16
3 1 2
1 3 8
17 64
.125
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
52
M
15 16
Attachment
1 57 64
2 19 32
2 11 16
2 3 4
2 3 4
2 13 16
1 57 64
2 19 32
2 11 16
2 3 4
2 13 16
2 3 4
2 13 16
FS5
Att. No.
FS5
Dimensions
N
R
Chain No.
AL88K
4 1 8
5 5 8
25 64
Chain No.
5 8
1 1 4
1 4
1.81
1 4
F50
Att. No.
F50
AL88XH
8.00
9.38
1.25
Chain No.
AL662
1 5 16
1 57 64
Dimensions
N
.410
1.25
G30S
Att. No.
G30S
Dimensions
N
R
11 32
3 4
1 5 16
1 4
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
53
G38
Att. No.
G38
Dimensions
M
N
Chain No.
AL662
1 15 16
2 35 64
1 1 8
21 64
Chain No.
Dimensions
N
AL662
AL667X
1 9 16
2 35 64
2 1 16
2 43 64
Chain No.
AL667X
AL88K
19 32
3 4
15 32
.125
G50
Att. No.
G50
1
1
25 64
7 8
25 64
7 8
.148
.148
7 16
15 32
HB4
Att. No.
HB4
54
19 32
3 4
Dimensions
R
0.00
0.35
2.160
2 17 32
3 16
3 16
KS
Dimensions
M
Att. No.
Chain No.
KS
KS
KS
KS
KS
AL662
AL667H
AL667X
AL667XH
AL88XH
2 3 4
4 1 16
4 1 16
4 1 16
4 1 16
3 25 32
5 3 16
5 3 8
5.456
5 3 4
15 16
17 64
3 16
1 1 8
1 1 8
1 1 4
1 1 4
21 64
21 64
1 4
5 16
25 64
3 8
25 64
3 8
Att. No.
Chain No.
K1
K1
K1
K1
AL662
AL667H
AL667X
AL667XH
2 15 32
3 9 32
1 9 32
17 64
1 8
2 15 32
2 15 32
2 15 32
3 9 32
3 9 32
3 9 32
1 9 32
1 9 32
1 9 32
17 64
1 8
17 64
1 8
17 64
1 8
Att. No.
Chain No.
M2
AL88K
1 1 2
7 8
K1
Dimensions
M
M2
Dimensions
R
2 13 32
3 9 32
5 16
55
KG30S
Dimensions
M
Att. No.
Chain No.
KG30S
AL662
2 5 8
3 13 16
Chain No.
AL667XH
3 3 4
AL88XH
3 3 4
Att. No.
Chain No.
KSB
AL667X
4 1 16
5 3 8
1 1 8
21 64
57 64
5 16
KSB
AL667XH
4 1 16
5.456
1 1 4
25 64
57 64
3 8
AL88XH
4 1 16
5 3 4
1 1 4
25 64
61 64
3 8
3 16
11 32
1 4
K1S
Att. No.
K1S
K1S
Dimensions
M
4.658
1 1 8
3 8
1 4
4.762
1 1 8
3 8
1 4
KSB
KSB
Dimensions
M
N
SFE LINK
56
Att. No.
Chain No.
SFE
AL667H
3 1 2
8 3 8
Dimensions
N
21 64
1 1 4
2 7 32
.125
ALLIED-LOCKE
57
Average
Ultimate
Strength
Lbs.
Minimum
Tensile
Strength
Lbs.
Chain
Number
Links in
10 Feet
Approx.
Wt. Lbs.
Per 100 Ft.
25
133
20
950
760
.904
45 64
.438
.422
.073.006
32
104
32
1650
1320
1.157
15 16
.610
.594
.090.006
32W
104
39
1650
1320
1.157
1 1 16
.610
.594
.079.006
33
86
39
1650
1320
1.402
1 1 16
.627
.610
.095.006
42
87
50
2300
1680
1.375
1 7 32
.800
.781
.105.006
50H
87
63
2600
2240
1.375
1 9 32
.798
.781
.125.006
51
106
40
2100
1680
1.133
1 3 32
.720
.703
.105.006
52
80
66
2700
2160
1.508
1 13 32
.760
.840
.125.006
55
74
62
2800
2240
1.630
1 9 32
.813
.796
.125.006
62
73
90
4200
3520
1.654
1 9 16
1.002
.984
.148.007
62A
72
131
5500
4000
1.664
1 15 16
1.002
.984
.172.007
62H
73
112
4400
3600
1.654
1 7 8
1.002
.984
.148.007
67H
52
137
5500
4400
2.313
1 7 8
1.110
1.093
.185.007
67XH
52
145
6800
5500
2.313
1 7 8
1.110
1.093
.200.010
67W
52
144
4800
3800
2.313
2 3 8
1.110
1.093
.148.007
70
60
130
4800
4000
2.013
1 15 16
1.110
1.093
.172.007
72
59
131
4800
4000
2.025
1 15 16
1.110
1.093
.172.007
41
130
4800
3840
2.906
1 15 16
1.116
1.093
172.007
72 1 2
73
115
4500
3600
1.643
1.172
1.156
.148.007
Att. No.
Chain No.
AE
67H
2 1 32
29 32
9 16
21 64
.185
67H
2 1 32
29 32
9 16
25 64
.185
67XH
2 1 32
29 32
9 16
25 64
.200
AE3
Att. No.
Chain No.
AS
67H
2 1 32
1 3 32
9 16
21 64
.185
AS
67XH
2 1 32
1 3 32
9 16
21 64
.200
Att. No.
A1
Chain No.
42
13 32
29 32
29 64
17 64
.105
55
11 8
1 1 16
17 32
17 64
.125
62
13 8
1 3 8
11 16
17 64
.148
Att. No.
A2
Chain No.
55
1 29 64
1 1 4
5 8
17 64
.125
62
1 9 16
1 1 4
5 8
17 64
.148
Att. No.
Chain No.
A2W
67H
2 1 32
1 3 16
35 64
21 64
.125
59
K1
Att. No.
Chain No.
7 8
7 16
3 4
17 64
2 3 4
.125
1 15 64
5 7 8
7 16
37 64
17 64
31 4
.148
K1
55
5 8
K1
62
4 2 15 32
5 8
Att. No.
Chain No.
1 5 8
1 5 16
21 32
21 64
.170
SFS1
Att. No.
Chain No.
SFS1
62
4 5 16
7 8
5 1 4
1 1 2
21 64
.148
Att. No.
Chain No.
CO
55
1 3 8
5 8
.125
CO
62
1 39 64
5 8
.148
Att.
No.
Chain
No.
55
1 1 4
1 3 16
7 16
1 3 4
17 64
.105
62
1 7 16
1 9 32
15 32
1 25 32
17 64
.105
55
1 1 4
1 3 16
7 16
1 3 4
21 64
.105
62
1 7 16
1 9 32
15 32
1 25 32
21 64
.105
62
1 7 16
1 3 16
7 16
1 25 32
17 64
.105
C1
C11
C15
Att.
No.
Chain
No.
55
1 1 4
62
1 5 16
G27
13 16
1 5 16
17 64
.125
1 1 16
11 16
1 1 16
17 64
.148
HB4
Att.
No.
Chain
No.
55
7 8
1 11 16
2 3 16
.125
62
7 8
1 61 64
2 3 16
.148
HB4
SD-SE-SH
Att.
No.
Chain
No.
TS
SD
32W
2 1 8
1 3 16
5 8
13 64
2 13 16
.095
SD
55
2 1 4
1 1 8
25 32
15 64
3 1 4
.125
62
2 1 2
1 1 8
25 32
17 64
3 5 8
.148
SE
55
2 7 16
1 1 8
25 32
5 16
3 1 4
.125
SH
55
2 1 4
1 1 8
25 32
9 32
3 1 4
.125
62
2 3 4
1 1 8
25 32
17 64
3 5 8
.148
Chain
No.
1 5 8
1 3 16
1 3 4
1 7 8
9 32
.155
SD
SH
SHW
Att.
No.
SHW
67H
61
HEAVY DUTY
CHAIN LINKS
T-BAR
16000 pounds minimum tensile strength.
Made of 5/16 thick Hi-strength steel materialuniformly heat treated in
atmospherically controlled furnaces.
Designed to be used on regular #67 sprocketsmanufctured to pitch of 2.560
inches during articulation over sprockets.
Clean design prevents clogging or binding.
Longer wear life than steel detachable or pintle chains due to thickness of
material.
Easily assembled or disassembledtwist link approximately 45 and lift or
insert.
Design of unit attachment links is offset at lug extension allowing slat to ride
on surface of ooring giving best cleaning action.
Chain
Size
P
Pitch
(inch)
Links
In
10
Adv.
Ult.
Strength
AL67 T-Bar
2.55
47
16,000 lbs.
Att.
No.
Chain
No.
AS
A1
A2
AL67 T-Bar
AL67 T-Bar
AL67 T-Bar
2 1 32
2 1 32
2 1 32
3 3 4
3 3 4
3 3 4
Dimensions (inches)
Inside
Width
Width
Thickness
Overall
D
T
W
1.093
Dimensions
M
1 1 8
1 1 8
1 1 8
.312
2.000
21 64
.312
.312
.312
25 64
29 64
DIRECTION OF TRAVEL
T-ROD
Developed for use in spreaders, its unique design increases fatigue life, reduces stretching, increases wear life, and
runs smoothly and quietly on standard #67 sprockets.
DIRECTION OF TRAVEL
Chain
Size
P
Pitch
(inch)
Links
In
10
Adv.
Ult.
Strength
AL67 T-Rod
2.388
50
16,000 lbs.
Dimensions (inches)
Inside
Width
Width
Thickness
Overall
D
T
W
1.125
.437
2.50
PINTLE CHAIN
T-BAR CHAIN
ALLIED-LOCKE
REPLACEMENT CHAINS FOR THE AG INDUSTRY
Feeder House Chains
Corn Gathering Chains
Most Makes
and Models
Available
Elevator Chains
Forage Harvester Chains
www.alliedlocke.com
SS CLASS
BUSHED STEEL CHAIN
Available Nos.: SS 102B, SS 110, SS 111,
SS 131, SS 150, SS 188, SS 856, SS 857,
SS 859, SS 864
Available Pitches: 2.609 to 6.050
Available Average Ultimate Strengths:
25,000 to 200,000 Lbs.
66
X TYPE
Available Nos.: X 348, X 458, X 658, X 678
Available Pitches: 3.041 to 6.031
Available Average Ultimate Strengths:
24,000 to 85,000 Lbs.
COMBINATION CHAIN
H CLASS REFUSE
DRAG CHAIN
Available Nos.: H 102, H 104,
H 110, H 112, H 116, H 120, H 480
Available Pitches: 5.000 to 8.000
Available Average Ultimate
Strengths: 36,400 to 52,000 Lbs.
COMBINATION REFUSE
DRAG CHAIN
Available Nos.: 6104, 6110, 8480
Available Pitches: 6.000 to 8.000
Available Average Ultimate
Strengths: 54,500 to 73,000 Lbs.
www.alliedlocke.com
700 CLASS
PINTLE CHAIN
Available Nos.:
720, 720S, MS 720S, 730,
MS 730, 788
Available Pitches: 2.609 to 6.000
Available Average Ultimate Strengths:
22,750 to 42,000 Lbs.
COMBINATION
TRANSFER CHAIN
Available Nos.: C 55A, C 55B, C 55D
Available Pitches: 1.631
Available Average Ultimate Strength:
11,700 Lbs.
DETACHABLE CHAIN
Available Nos.:
25, 32, 42, 45, 51, S 51, 52,
55, 57, 62, S 62, 67, 75,
77, 78, 88, 103, 124
Available Pitches: .902 to 4.063
Available Average
Ultimate Strengths:
880 to 21,250 Lbs.
SPECIAL PURPOSE MC 33
PINTLE CHAIN
Available Nos.: MC 33, DF 3498,
DF 3500, DF 3910
Available Pitches: 1.750-3.000
Available Average
Ultimate Strength:
12,000 to 48,000 Lbs.
www.alliedlocke.com
67
ATTACHMENT
SELECTION CHART
TYPE A
TYPE E
Available for:
SS Class Bushed
Steel Chain
MSR Class Bushed Roller
Steel Chain
Combination Chain
H Class Mill Chain
400 Class Pintle Chain
700 Class Pintle Chain
Detachable Chain
Available for:
400 Class Pintle Chain
900 Class Pintle Chain
TYPE F
TYPE AM
Available for: 700 Class Pintle Chain
Available for:
Combination Chain
H Class Mill Chain
400 Class Pintle Chain
700 Class Pintle Chain
Detachable Chain
TYPE G
TYPE D
Available for:
MSR Class Bushed Roller Steel Chain
400 Class Pintle Chain
Detachable Chain
Available for:
SS Class Bushed
Steel Chain
MSR Class Bushed Roller
Steel Chain
Combination Chain
H Class Mill Chain
400 Class Pintle Chain
Detachable Chain
www.alliedlocke.com
ATTACHMENT
SELECTION CHART
TYPE H
Available for:
H Class Mill Chain
TYPE M
Available for:
700 Class Mill Chain
TYPE S
Available for:
SS Class Bushed Steel
Chain
Combination Chain
TYPE K
Available for:
SS Class Bushed
Steel Chain
MSR Class Bushed Roller
Steel Chain
Combination Chain
H Class Mill Chain
400 Class Pintle Chain
700 Class Pintle Chain
Detachable Chain
BUCKETS
Styles Available:
AC
MD
Plastic
Fab Steel
Manganese
Chain & belt
punchings available
69
CHAIN DATA
DIRECTION OF TRAVEL
Although some chain types may be run in either
direction, most chain used in conveyor systems
has a preferred direction of travel for optimum
chain life. The descriptive text introducing each
chain type in this catalog explains the direction of
travel for the class. However, below is presented
an easy reference for the direction of travel of
each type of Moline Chain available:
HOW TO IDENTIFY
RIGHT AND LEFT HAND
ATTACHMENTS
STEEL CHAIN
SS Class Bushed and MSR Class Bushed Roller Steel Chain may
be run in either direction. MXS Class Offset Steel Drive Chain
should be operated in the direction of the closed ends of the links.
RIVETLESS DROP FORGED CHAIN
May be operated in either direction.
COMBINATION CHAIN
May be operated in either direction.
70
www.alliedlocke.com
ENGINEERING DATA
MOLINE CONVEYOR
AND ELEVATOR CHAIN
SELECTION DATA
HORSEPOWER RATINGS
When: HP Horsepower
P Chain Pitch in inches
T Number of teeth in the
driving sprocket
Working Load x P x T x R
HP
396,000 x Fs
WL
driving sprocket in
revolutions per minute
Fs Speed Factor (Table 2)
WL Working Load
HP x 396,000 x Fs
PxTxR
CONDITIONS AFFECTING
CHAIN LIFE EXPECTANCY
SERVICE
FACTORS
Frequency of
Shock
Infrequent Shock . . . . . . . . . . . . . . . . . . . . . . . . .1
Frequent Shock . . . . . . . . . . . . . . . . . . . . . . . . . .1.2
Character of
Chain Loading
Atmospheric
Conditions
Daily Operating
Range
8 to 10 Hours . . . . . . . . . . . . . . . . . . . . . . . . . .1
12 to 24 Hours . . . . . . . . . . . . . . . . . . . . . . . . . .1.2
NUMBER
OF
TEETH
6
7
8
9
10
11
12
14
16
18
20
24
125
2.40
1.61
1.37
1.26
1.16
1.09
1.05
.980
.935
.909
.893
.847
150
2.91
1.81
1.49
1.36
1.24
1.15
1.10
1.02
.971
.943
.917
.877
175
3.57
2.04
1.63
1.45
1.31
1.22
1.16
1.07
1.01
.980
.952
.901
200
4.41
2.29
1.76
1.55
1.37
1.28
1.21
1.11
1.05
1.01
.980
.935
225
5.65
2.60
1.93
1.65
1.45
1.34
1.26
1.15
1.08
1.04
1.01
.962
250
7.35
2.96
2.10
1.76
1.53
1.40
1.32
1.19
1.12
1.08
1.04
.980
www.alliedlocke.com
71
ENGINEERING DATA
SELECTING THE PROPER LAYOUT
From the layouts presented here, select the one
which best typies the conveyor system you wish to
install. The following symbols are used in the formulas which accompany the layouts:
C average weight of chain, slats, buckets, etc. per
conveyor foot in pounds
PA
chain pull in pounds (at points indicated in
PB diagram)
f5 friction coefcient for rolling chain.45 dry, .35 lubricatedcored bore, .40 dry, .25 lubricatedmachine
bore
CHAIN
TYPE
SS CLASS
BUSHED STEEL
LAYOUT
NO. 1
HORIZONTAL
CONVEYOR
LAYOUT
NO. 2
HORIZONTAL
CONVEYOR
LAYOUT
NO. 3
HORIZONTAL
CONVEYOR
LAYOUT
NO. 4
HORIZONTAL
CONVEYOR
LAYOUT
NO. 5
INCLINED
CONVEYOR
LAYOUT
NO. 6
INCLINED
CONVEYOR
LAYOUT
NO. 7
INCLINED
CONVEYOR
LAYOUT
NO. 8
INCLINED
CONVEYOR
LAYOUT
NO. 9
VERTICAL
CONVEYOR
Material
Being Carried
Chain Sliding
Material
Being Carried
Chain Rolling
Material
Sliding
Chain Sliding
Material
Sliding
Chain Rolling
Material
Being Carried
Chain Sliding
Material
Being Carried
Chain Rolling
Material
Sliding
Chain Sliding
Material
Sliding
Chain Rolling
Material
Being Carried
MSR CLASS
BUSHED ROLLER
COMBINATION
H CLASS MILL
REFUSE-DRAG
X
X
X
COMBINATION
TYPE REFUSE
TRANSFER
ROLLER TOP
400 CLASS PINTLE
700 CLASS PINTLE
900 CLASS PINTLE
DETACHABLE
MC-33 CLASS
PINTLE
X
X
X
X
X
X
72
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
www.alliedlocke.com
ENGINEERING DATA
MOLINE CONVEYOR
AND ELEVATOR CHAIN
SELECTION DATA
TABLE AM VALUES
AVERAGE
f2
WEIGHT
Vertical
MATERIAL
Per Cubic Foot Factor
(dry)
3540
.50
Ashes
(wet)
4550
.60
(clinker)
7580
.70
Cement
(Portland)
7585
.65
(Anthracite)
5257
.38
Coal
(Bituminous)
4050
.60
Coke (Breeze)
2535
.65
Grain
3845
.40
Gravel
90100
.60
(wet)
90110
.60
Sand (dry)
110130
.85
(foundry)
90110
.85
Sawdust
1013
.40
Stone (crushed)
9095
.60
Wood Chips
1220
.40
M FACTORS
CENTRIFUGAL
CONTINUOUS
ELEVATOR
ELEVATOR
1.70
.50
2.00
.84
2.30
1.18
(Service
factors)
(Speed
correction
factor)
Corrected
chain
pull
SERVICE FACTORS
The result is a corrected chain pull which approximates actual operating conditions. The selected chain should have a
working load in excess of the corrected chain pull to assure
long, trouble-free chain life.
Service factors are used to compensate for unfavorable operating conditions, such as shock,
characteristics of loading, conditions of operation, and daily operating periods. They are listed
in Table E.
Number of
Teeth in
Driving
Wheel 10
6
1.05
7
.97
8
.93
9
.91
10
.89
11
.87
12
.85
14
.84
16
.83
18
.82
20
.82
24
.81
50
1.57
1.29
1.19
1.12
1.07
1.02
.99
.95
.92
.91
.90
.87
75
1.92
1.46
1.32
1.23
1.16
1.10
1.06
1.01
.97
.95
.94
.91
100
2.28
1.64
1.44
1.34
1.25
1.18
1.13
1.06
1.02
1.00
.98
.94
125
2.75
1.84
1.57
1.44
1.33
1.25
1.20
1.12
1.07
1.04
1.02
.97
150
3.31
2.07
1.71
1.55
1.41
1.32
1.26
1.17
1.11
1.08
1.05
1.00
f3
Horizontal
Factor
.026
.018
.082
.086
.050
.049
.028
.044
.084
.135
.165
.068
.005
.112
.005
175
4.08
2.34
1.86
1.66
1.49
1.39
1.32
1.22
1.15
1.12
1.09
1.03
200
5.03
2.62
2.02
1.77
1.57
1.46
1.38
1.27
1.20
1.15
1.12
1.06
225
2.98
2.20
1.89
1.66
1.53
1.45
1.32
1.24
1.19
1.16
1.09
250
3.39
2.40
2.01
1.75
1.60
1.51
1.37
1.28
1.23
1.19
1.12
275
3.92
2.62
2.15
1.84
1.68
1.56
1.42
1.33
1.27
1.23
1.16
300
4.52
2.85
2.29
1.92
1.74
1.62
1.46
1.37
1.30
1.26
1.19
SERVICE
CONDITIONS OF OPERATION
FACTOR
Shock Frequency
Infrequent . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.0
Frequent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2
Type of Loading
Uniform or Steady . . . . . . . . . . . . . . . . . . . . . . .1.0
Moderate Shock Load . . . . . . . . . . . . . . . . . . . . .1.2
Heavy Shock Load . . . . . . . . . . . . . . . . . . . . . . .1.5
Ambient Conditions
Clean and Moderate Temperature . . . . . . . . . . . .1.0
Moderately Abrasive . . . . . . . . . . . . . . . . . . . . . .1.2
Abrasive, High Temperature, Unprotected . . . . . .1.4
Length of Operation
8 to 10 hours per day . . . . . . . . . . . . . . . . . . . .1.0
10 to 24 hours per day . . . . . . . . . . . . . . . . . . . .1.2
www.alliedlocke.com
73
ENGINEERING DATA
MOLINE CONVEYOR AND ELEVATOR
CHAIN SELECTION DATA
LAYOUT NO. 1 HORIZONTAL CONVEYOR
74
www.alliedlocke.com
ENGINEERING DATA
LAYOUT NO. 6 INCLINED CONVEYOR
SPROCKET
SPROCKET
75
WELDED DRAG
CHAIN
DRAG CHAINS
Welded steel drag chains are of all-steel, welded rugged construction for most
drag applications. With their large, wide pushing area, they provide a sizeable
carrying capacity when operated at moderate speeds and also keep the chain
from riding over the top of the material. Can be used in the same troughs and
over the same sprockets as their cast chain counterparts.
CHAIN
NUMBER
WD104
WD110
WDH110
WD120
WD122
WD480
WDH480
PITCH
6.000
6.000
6.000
6.000
8.000
8.000
8.000
AVERAGE
RATED
ULTIMATE WORKING APPROX.
STRENGTH
LOAD
LINKS IN
LBS.
LBS.
10 FEET
51,000
8,500
20
51,000
8,500
20
60,000
10,000
20
70,000
11,700
20
70,000
11,700
15
70,000
11,700
15
90,000
15,000
15
AVERAGE
WEIGHT OVERALL
PER
WIDTH
FOOT
JK
8.7
6.88
12.0
11.88
12.0
11.88
19.4
12.00
16.0
12.00
18.1
14.62
18.1
14.62
LENGTH
OF
RIVET
SIDE BAR
BEARING DIAMETER THICKNESS
X
A
E
5.38
.75
.38
10.38
.75
.38
10.38
.75
.38
10.12
.88
.50
10.12
.88
.50
12.75
.88
.50
12.75
.88
.50
MAX.
SPKT.
FACE
D
4.12
9.00
9.00
8.50
8.50
11.00
11.00
SIDE BAR
WIDTH
F
1.50
1.50
1.50
2.00
2.00
2.00
2.00
76
CHAIN
NUMBER
WD104
WDH110
WD104
WDH110
WD120
WDH480
S
4.12
9.12
12
17
17
22
B
.38
.38
1.88
1.88
1.75
2.50
G
2.25
2.25
T
.38
.38
.38
.38
.50
.50
www.alliedlocke.com
WELDED MILL
CHAIN
OFFSET MILL TYPE CHAINS
Welded steel mill chains are recommended for most conveying, driving, and elevating applications where a high-strength steel rollerless chain is required. These
chains will operate on the same sprockets as those of the replaceable cast chains.
A complete line of attachments and optional heat treatment make them easily
adaptable to a wide variety of applications.
CHAIN
NO.
PITCH
WH188
2.609
WH78
2.609
WH78-4
4.000
WH82
3.075
WH124
4.000
WH124HD
4.063
WH111
4.760
WH106
6.000
WH106HD
6.000
WH106XHD 6.000
WH110
6.000
WH132
6.050
WH132HD
6.050
WH150
6.050
WH150HD
6.050
WH150XHD 6.050
AVERAGE
RATED
ULTIMATE WORKING APPROX.
STRENGTH
LOAD
LINKS IN
LBS.
LBS.
10 FEET
30,000
2,850
46
30,000
3,500
46
30,000
3,500
30
36,000
4,400
39
69,000
7,200
30
100,000
10,500
30
91,000
8,850
26
69,000
7,200
20
92,500
7,875
20
115,000
10,500
20
69,000
7,875
20
115,000
15,300
20
139,500
16,200
20
116,000
15,300
20
168,000
16,200
20
161,000
18,200
20
LENGTH
SIDE
SIDE
MAX.
AVERAGE OVERALL
OF
RIVET
BAR
BAR BARREL SPKT.
WEIGHT
WIDTH BEARING DIAMETER THICKNESS WIDTH DIAM. FACE
PER FOOT
JK
X
D
T
F
H
A
3.8
2.69
1.62
.50
.25
1.12
.88
.88
4.0
3.00
2.00
.50
.25
1.12
.88
1.12
4.0
3.00
2.00
.50
.25
1.12
.88
1.12
4.8
3.25
2.25
.56
.25
1.25
1.06
1.25
8.3
4.25
2.75
.75
.38
1.50
1.25
1.50
14.7
4.75
3.00
1.00
.50
2.00
1.62
1.62
9.5
4.88
3.38
.75
.38
1.75
1.25
2.00
7.0
4.25
2.75
.75
.38
1.50
1.25
1.62
9.0
4.75
3.00
.75
.50
1.50
1.25
1.62
11.8
4.88
3.00
1.00
.50
2.00
1.62
1.62
7.2
4.62
3.00
.75
.38
1.50
1.25
1.88
14.2
6.25
4.38
1.00
.50
2.00
1.62
2.88
16.4
6.75
4.62
1.00
.62
2.00
1.62
2.88
16.8
6.25
4.38
1.00
.50
2.50
1.62
2.88
19.3
6.75
4.62
1.00
.62
2.50
1.62
2.88
19.7
6.75
4.62
1.12
.62
2.50
1.62
2.88
www.alliedlocke.com
77
ATTACHMENT
NUMBER
A1
A1
A1
A2
A2
A2
A2
A225
F10
F30
F659
WEIGHT
CHAIN PER FOOT
NUMBER
LBS.
WH78
4.97
WH82
6.50
WH124
8.40
WH78
4.50
WH82
6.00
WH124 10.00
WH132 17.00
WH124
8.90
WH82
4.80
WH78
9.90
WH124 13.10
A
2.00
2.13
2.62
2.00
2.13
2.62
3.75
4.00
F10 ATTACHMENT
A2 ATTACHMENT
D
.38
.38
.62
.38
.38
.38
.50
E
1.25
1.75
2.00
2.13
2.25
3.00
4.00
2.00
1.25
1.00
1.75
G
.81
.94
1.13
.78
.94
1.13
1.50
2.69
4.75
H
1.25
1.50
1.81
.41
.50
.88
1.62
2.00
.94
.81
.50
F30 ATTACHMENT
F
.50
.62
.62
.50
.62
.88
.75
1.94
A225 ATTACHMENT
1.13
1.25
1.94
2.75
R
.56
.62
.75
.56
.62
.75
1.00
.75
.63
.56
.75
T
.25
.25
.38
.25
.31
.38
.50
.50
.25
2.13
10.25
3.00
6.59
2.25
.88
F659 ATTACHMENT
We are able to
custom manufacture
attachments per your
specic request.
ATTACHMENT
NUMBER
H2
H2
K1
K1
K1
K2
K2
K2
K2
RR
RR
RR
A11-Cradle
C-Cradle
Side Lift Chair
WEIGHT
CHAIN PER FOOT
NUMBER
LBS.
WH78
4.75
WH82
9.00
WH78
4.97
WH82
6.50
WH124 11.70
WH78
5.00
WH82
8.00
WH124 12.00
WH132 19.00
WH78
4.70
WH82
7.00
WH124 10.00
WH132 26.00
WH132 29.00
WH132 17.50
RR ATTACHMENT
K1 ATTACHMENT
2.00
2.13
2.62
2.00
2.13
2.62
3.75
.38
.38
.62
.38
.38
.38
.50
1.25
1.75
2.00
2.13
2.25
3.00
4.00
2.50
3.50
.50
.62
.62
.50
.62
.62
.75
G
3.56
3.62
.81
.94
1.13
.78
.94
1.13
1.50
1.50
1.75
1.88
2.00
2.00
11.00
H
.31
.62
1.25
1.50
1.81
.41
.50
.88
1.62
.75
.81
1.50
2.35
2.62
K
1.10
1.13
K2 ATTACHMENT
1.13
1.25
1.94
2.75
R
.56
.62
.56
.62
.75
.56
.62
.75
1.00
.56
.62
.75
1.00
1.00
1.00
T
.25
.19
.25
.25
.38
.25
.31
.38
.50
.25
.25
.38
.50
1.00
9.25
11.00
11.00
C CRADLE ATTACHMENT
SS CLASS BUSHED
STEEL CHAIN
SS CLASS
BUSHED STEEL CHAIN
MOLINE
CHAIN NO.
SS 102B
SS 110
SS 111
SS 131
SS 150
SS 188
SS 856
SS 857
SS 859
SS 864
PINS
Alloy Steel,
Case Hardened
Alloy Steel,
Case Hardened
Alloy Steel,
Case Hardened
Alloy Steel,
Case Hardened
Alloy Steel,
Case Hardened
Alloy Steel,
Case Hardened
Alloy Steel,
Induction Hardened
Alloy Steel,
Induction Hardened
Alloy Steel,
Induction Hardened
Alloy Steel,
Induction Hardened
BUSHINGS
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Alloy Steel,
Case Hardened
Alloy Steel,
Case Hardened
Alloy Steel,
Case Hardened
Alloy Steel,
Case Hardened
80
SIDEBARS
Carbon Steel,
Heat Treated
Carbon Steel,
Heat Treated
Carbon Steel,
Heat Treated
Carbon Steel,
Heat Treated
Carbon Steel,
Heat Treated
Carbon Steel,
Heat Treated
Carbon Steel,
Heat Treated
Carbon Steel,
Heat Treated
Carbon Steel,
Heat Treated
Carbon Steel,
Heat Treated
Moline SS Bushed Steel Chain is ideal for operating under extremely gritty or abrasive conditions and for elevators where centers are widely
spaced. This chain is often referred to as Steel
Bushed or Rollerless.
The parts are machined and heat treated with
the goal of maximum strength and wear per
pitch. Accurately manufactured sidebars assure
tight pins and bushings and close pitch control.
Sidebars are produced to accommodate the
ends of the pins and bushings* which lock into
position in the sidebars and will not rotate during
chain operation.
The materials used are carefully selected. For
example, the pins are alloy steel that contain
nickel, chrome, and molybdenum which improves the chain life through its greater fatigue
resistance, improved abrasive resistance, and increased tensile strength at both high and low
temperatures. All of these factors result in a premium product for conveyor and elevator service
for gritty, abrasive, and dusty ne particle materials such as ashes, crushed coal, soda ash, cement, crushed stone, and gravel.
These chains are available in pitch sizes:
2.609 to 6.050 inches; Average Ultimate
Strengths from 25,000 to 200,000 pounds; Recommended Working Loads from 2,750 to 21,800
pounds.
Assorted attachments are offered.
SS Chain is offered in riveted and cottered
construction except Nos. SS 856, SS 857 and
SS 859, which are furnished in cottered construction only. All of the cottered construction
chain uses T-head cotters. Cottered construction
will be furnished unless Riveted is requested.
Moline SS Bushed Steel Chain is made in accordance with manufacturers standards and
may be interchanged with standard bushed steel
chain of other manufacturers.
Sprockets are available in Brutaloy, cast steel,
and ame cut when required.
*NOTE: Bushing with milled ends used on
SS188. Balance of SS Class Bushed
Steel Chain manufactured with round
bushing press tted into side bars.
SS CLASS
BUSHED STEEL
CHAIN
MOLINE
CHAIN
NO.
SS 188*
SS 131
SS 102B
SS 111
SS 110
SS 856
SS 857
SS 859
SS 150
SS 864
ATTACHMENTS
AVAILABLE
A1/A2, A22, GI9, K1/K2, S1
A1, A2, K1, K2, S1
A2, K2, S1
A2, K2, S1
A2, K2
K2, K3, K6, K24, K35
K44
K44
K2, K3, S1
K443
*NOTE: Bushing with milled ends used on SS188. Balance of SS Class Bushed Steel Chain manufactured with round bushing press tted into side
bars.
SS CLASS
BUSHED STEEL
CHAIN
RIVETED
COTTERED
OVER-A
L
RIVETE L WIDTHD
HEIGHT
O
SIDEBA F
RS
DIAMET
E
BUSHIN R OF
G
HEAD O
F
TO CEN PIN
TER
LINE
END OF
P
TO CEN IN
T
COTTER ER LINEED
END OF
P
TO CEN IN
T
RIVETE ER LINED
THICKN
ES
SIDEBA S OF
RS
DISTAN
CE BET
W
INNER
SIDEBA EEN
RS
OVER-A
L
LENGTH L
BUSHIN OF
GS
PITCH
2.609
3.075
4.000
4.760
6.000
6.000
6.000
6.000
6.050
7.000
DIAMET
ER OF
PIN
MOLINE
CHAIN
NO.
SS 188*
SS 131
SS 102B
SS 111
SS 110
SS 856
SS 857
SS 859
6.050 SS 150
7.000 SS 864
CHAIN
PITCH
2.609
3.075
4.000
4.760
6.000
OVER-A
L
COTTER L WIDTHED
C
2.69
3.75
4.53
5.44
4.53
6.31
#5.94
#7.25
6.62
#7.25
D
0.500
0.625
0.625
0.750
0.625
1.000
1.000
1.250
1.000
1.250
E
2.50
3.50
4.38
5.00
4.38
6.00
6.50
F
1.12
1.50
1.50
2.00
1.50
2.50
**3.25
4.00
2.50
4.00
H
0.88
1.25
1.00
1.44
1.25
1.75
1.75
2.38
1.75
2.38
J
1.25
1.62
2.05
2.38
2.05
2.91
2.81
3.44
3.06
3.44
K
1.34
1.88
2.27
2.72
2.27
3.16
3.12
3.81
3.31
3.81
L
1.25
1.75
2.19
2.50
2.19
3.00
3.25
T
0.25
0.38
0.38
0.38
0.38
0.50
0.50
0.62
0.50
0.62
W
1.06
1.31
2.12
2.62
2.12
3.00
3.00
3.75
3.31
3.75
X
1.56
2.06
2.88
3.38
2.88
4.00
4.00
5.00
4.31
5.00
**Inside sidebar, outside sidebar2.50; Inside sidebar, outside sidebar3.00; # Pin Heads same side
*NOTE: Bushings with milled ends used on SS188. Balance of SS Class Bushed Steel Chain manufactured with round
bushings press tted into side bars.
82
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
SS CLASS
BUSHED STEEL
CHAIN ATTACHMENTS
A1 ATTACHMENT
MOLINE
ATTACHMENT
NO.
SS 131-A1
MOLINE
ATTACHMENT
NO.
SS 188-A1/A2
PITCH
3.075
A
2.06
B
1.54
C
0.81
E
2.50
G
2.78
H
2.69
T
0.38
PITCH
2.609
A
1.88
B
1.31
G
2.53
H
2.56
J
0.62
M
2.09
T
0.25
AVERAGE
WEIGHT
PER FT.
LBS.
8.9
AVERAGE
WEIGHT
PER FT.
LBS.
4.8
A1/A2
ATTACHMENT
83
SS CLASS
BUSHED STEEL
CHAIN ATTACHMENTS
A2 ATTACHMENT
MOLINE
ATTACHMENT
NO.
SS 131-A2
SS 102B-A2
SS 111-A2
SS 110-A2
MOLINE
ATTACHMENT
NO.
SS 188-A22
PITCH
3.075
4.000
4.760
6.000
PITCH
2.609
A
2.06
2.66
3.12
2.66
A
1.78
B
0.79
1.12
1.23
2.12
C
1.00
1.00
1.50
1.00
B
1.31
F
1.50
1.75
2.31
1.75
E
1.25
G
2.78
3.20
3.75
3.19
H
2.38
A22
ATTACHMENT
H
2.69
3.36
3.90
3.36
T
0.38
0.38
0.38
0.38
T
0.38
AVERAGE
WEIGHT
PER FT.
LBS.
8.9
8.0
12.4
7.5
AVERAGE
WEIGHT
PER FT.
LBS.
4.8
SS CLASS
BUSHED STEEL
CHAIN ATTACHMENTS
K1 ATTACHMENT
MOLINE
ATTACHMENT
NO.
SS 131-K1
MOLINE
ATTACHMENT
NO.
SS 131-K2
SS 102B-K2
SS 111-K2
SS 110-K2
SS 856-K2
SS150K2
PITCH
3.075
PITCH
3.075
4.000
4.760
6.000
6.000
6.050
A
4.12
A
4.12
5.31
6.25
5.31
6.31
7.50
B
1.54
B
0.79
1.12
1.23
2.12
1.88
1.65
C
1.00
1.00
1.50
1.00
1.88
1.88
E
2.50
F
1.50
1.75
2.31
1.75
2.25
2.75
G
5.56
G
5.56
6.41
7.50
6.38
9.00
9.31
H
5.38
H
5.38
6.72
7.81
6.72
9.06
9.38
T
0.38
AVERAGE
WEIGHT
PER FT.
LBS.
10.2
T
0.38
0.38
0.38
0.38
0.50
0.50
AVERAGE
WEIGHT
PER FT.
LBS.
10.2
9.0
15.2
8.6
23.0
23.0
K2 ATTACHMENT
SS CLASS
BUSHED STEEL
CHAIN ATTACHMENTS
K1/K2
ATTACHMENT
MOLINE
ATTACHMENT
NO.
SS 188-K1/K2
MOLINE
ATTACHMENT
NO.
SS188-G19
SS102B-G19
PITCH
2.609
PITCH
2.609
4.000
A
3.75
B
1.30
A
2.25
3.06
C
0.81
B
1.00
1.50
G
5.06
H
5.12
K
2.62
3.25
J
0.62
L
3.50
4.50
G19
ATTACHMENT
86
M
4.19
T
0.25
T
0.25
0.38
AVERAGE
WEIGHT
PER FT.
LBS.
5.7
AVERAGE
WEIGHT
PER FT.
LBS.
5.1
9.8
SS CLASS
BUSHED STEEL
CHAIN ATTACHMENTS
K3
ATTACHMENT
SS 856-K3
MOLINE
ATTACHMENT
NO.
SS 856-K3
SS 150K3
MOLINE
ATTACHMENT
NO.
SS 856-K6
PITCH
6.000
6.050
PITCH
6.000
A
6.56
7.50
A
6.56
SS 150-K3
B
3.00
3.02
B
3.00
C
1.88
1.88
AVERAGE
WEIGHT
PER FT.
LBS.
27.3
26.9
C
1.88
AVERAGE
WEIGHT
PER FT.
LBS.
27.3
M
N
T
6.94 10.94 0.50
K6
ATTACHMENT
87
SS CLASS
BUSHED STEEL
CHAIN ATTACHMENTS
K24
ATTACHMENT
MOLINE
ATTACHMENT
NO.
SS 856-K24
MOLINE
ATTACHMENT
NO.
SS 856-K35
PITCH
6.000
PITCH
6.000
A
7.25
A
7.25
B
1.75
B
3.00
C
1.88
C
1.88
F
2.50
G
9.00
G
H
13.50 13.56
J
1.25
K35
ATTACHMENT
88
H
9.06
M
11.75
T
0.50
AVERAGE
WEIGHT
PER FT.
LBS.
23.0
T
0.50
AVERAGE
WEIGHT
PER FT.
LBS.
27.3
SS CLASS
BUSHED STEEL
CHAIN ATTACHMENTS
K44
ATTACHMENT
SS 859-K44
SS 857-K44
SS 864-K443
MOLINE
ATTACHMENT
NO.
SS 857-K44
SS 859-K44
SS 864-K443
PITCH
6.000
6.000
7.000
A
7.00
9.00
9.00
B
1.25
0.75
0.75
C
2.50
3.00
3.00
H
13.81
15.06
15.00
0.88
0.88
M
12.00
13.00
13.00
4.50
5.50
T
0.50
0.62
0.62
AVERAGE
WEIGHT
PER FT.
LBS.
42.0
68.0
55.0
89
SS CLASS
BUSHED STEEL
CHAIN ATTACHMENTS
S1
ATTACHMENT
MOLINE
ATTACHMENT
NO.
SS 188-S1
SS 131-S1
SS 102B-S1
SS 111-S1
SS 150S1
B
0.62
0.78
0.81
1.00
1.28
C
2.06
2.50
3.00
3.25
3.75
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
90
H
2.12
2.88
3.72
4.19
5.38
K
2.62
3.25
3.75
4.25
5.00
T
0.25
0.38
0.38
0.38
0.50
AVERAGE
WEIGHT
PER FT.
LBS.
6.2
11.3
9.7
13.0
21.7
MSR CLASS
BUSHED ROLLER
STEEL CHAIN
Accurately Pitched
Straight Sidebars
T-Head Cotters
Hardened Bushings
Locked Into Sidebars
91
MSR CLASS
BUSHED ROLLER
STEEL CHAIN
MOLINE CHAIN NO.
ROLLERS
PINS
BUSHINGS
SIDEBARS
81 X
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Heat Treated
81 XH
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Heat Treated
81 XHD
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Heat Treated
MSR 149
Carbon Steel,
Case Hardened
Carbon Steel,
Thru Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Heat Treated
MSR 303
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Heat Treated
MSR 944
Carbon Steel,
Case Hardened
Carbon Steel,
Thru Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Heat Treated
MSR 996
Carbon Steel,
Case Hardened
Carbon Steel,
Thru Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Heat Treated
MSR 1114
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Alloy Steel,
Case Hardened
Carbon Steel
MSR 1116
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel
MSR 1317
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel
MSR 1539
Alloy Steel,
Thru Hardened
Alloy Steel,
Case Hardened
Alloy Steel,
Case Hardened
Carbon Steel,
Heat Treated
MSR 2184P
Carbon Steel,
Case Hardened
Alloy Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Heat Treated
MSR 2188
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Alloy Steel,
Case Hardened
Carbon Steel
MSR 2198
Carbon Steel,
Case Hardened
Alloy Steel,
Thru Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Heat Treated
MSR 3013
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel
MSR 4013
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel
MSR 4019
Carbon Steel,
Case Hardened
Carbon Steel,
Thru Hardened
Carbon Steel,
Case Hardened
Carbon Steel
MSR 4119
Carbon Steel,
Case Hardened
Carbon Steel,
Thru Hardened
Carbon Steel,
Case Hardened
Carbon Steel
MSR 4216
Carbon Steel,
Case Hardened
Alloy Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel
MSR 4328
Carbon Steel,
Case Hardened
Alloy Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Heat Treated
MSR 6018
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel,
Case Hardened
Carbon Steel
MSR 6238
Carbon Steel,
Case Hardened
Carbon Steel,
Thru Hardened
Carbon Steel,
Case Hardened
Carbon Steel
MSR 9063
Carbon Steel,
Case Hardened
Alloy Steel,
Thru Hardened
Carbon Steel,
Case Hardened
Alloy Steel,
Heat Treated
www.alliedlocke.com
MSR CLASS
BUSHED ROLLER
STEEL CHAIN
MOLINE
CHAIN
NO.
Style 1
Style 1
Style 2
Cottered
Riveted
Cottered
STYLE
PITCH
IN
INCHES
AVERAGE
WEIGHT
PER FT.
LBS.
AVERAGE
ULTIMATE
STRENGTH
LBS.
RECOMMENDED
MAXIMUM
WORKING
LOAD-LBS.
CHAIN AND
ATTACHMENT
CONSTRUCTION
46
46
46
2.4
4.2
4.6
24,000
42,000
42,000
2,100
2,100
2,100
Cottered or Riveted
Riveted
Riveted
H
None
None
40
40
40
1.9
4.0
4.5
10,000
13,000
13,000
1,800
2,100
2,100
Riveted Only
Cottered or Riveted
Cottered or Riveted
D5
A1/A2, A42, D5, K1-K2
None
39
7.0
40,000
4,650
Cottered or Riveted
A2
30
30
30
30
30
30
30
10.2
7.0
3.4
4.1
4.5
4.9
10.2
40,000
28,000
13,000
19,000
19,000
16,000
40,000
4,500
4,200
2,100
2,450
2,450
2,300
4,500
Cottered or Riveted
Cottered or Riveted
Cottered or Riveted
Cottered or Riveted
Cottered or Riveted
Cottered or Riveted
Cottered or Riveted
G19
A2, K2
A1/A2, A42, K1/K2
A1/A2, K1/K2
D5
A1/A2
A1, K1
20
20
20
20
20
20
20
20
9.3
11.8
6.3
5.0
18.2
18.7
4.6
10.9
60,000
70,000
28,000
21,000
100,000
140,000
18,000
38,000
5,900
5,900
4,200
3,450
7,650
7,400
2,500
5,600
Cottered or Riveted
Cottered or Riveted
Cottered or Riveted
Cottered or Riveted
Cottered Only
Cottered Only
Cottered or Riveted
Cottered Only
None
K2
A2, A42
A2, A42, K2
K2 only ev. 1
K2 only ev. 1
A1/A2, K1/K2
A2, K2
20
12.3
75,000
6,500
Cottered Only
A42
LINKS
PER
10 FEET
ATTACHMENTS
AVAILABLE
2
2
2
2.609
2.609
2.609
2
1
4
3.000
3.000
3.000
3.075
1
1
1
1
1
1
1
4.000
4.000
4.000
4.000
4.000
4.000
4.000
2
1
1
1
1
1
1
1
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
www.alliedlocke.com
93
MSR CLASS
BUSHED ROLLER
STEEL CHAIN
Style 2
Style 3
Style 4
Riveted
Cottered
Cottered
OVER-A
L
RIVETE L WIDTHD
HEIGHT
O
SIDEBA F
R
DIAMET
E
ROLLER R OF
HEAD O
F
TO CEN PIN
TER
LINE
COTTER
E
OF PIN D END
TO
CENTER
LINE
RIVETE
D
OF PIN END
T
CENTER O
LINE
THICKN
ES
SIDEBA S OF
R
DISTAN
CE
SIDEBA BETWEEN
RS
LENGTH
BUSHIN OF
GS
PITCH
IN
STYLE INCHES
DIAMET
ER OF
PIN
MOLINE
CHAIN
NO.
OVER-A
L
COTTER L WIDTHED
0.438
0.438
0.438
2.00
2.38
2.62
1.12
1.27
1.27
0.91
0.91
0.91
1.00
1.19
1.31
1.08
1.31
1.44
1.00
1.19
1.31
0.16
*.31/.22
0.31
1.07
1.07
1.07
1.38
1.72
1.72
1.65
2.16
2.16
1.00
1.12
1.50
0.88
1.50
1.50
0.84
1.03
1.03
1.22
1.22
0.81
1.12
1.12
0.19
0.19
0.19
0.50
1.00
1.00
0.88
1.38
1.38
3.28
1.50
1.25
1.59
1.91
1.69
0.31
1.50
2.12
3.38
3.12
2.16
2.31
2.31
2.28
3.38
1.50
1.50
1.12
1.25
1.25
1.25
1.50
2.25
1.75
1.50
1.50
1.75
2.00
2.25
1.62
1.50
1.03
1.16
1.16
1.09
1.62
1.88
1.75
1.22
1.28
1.28
1.28
1.88
1.75
1.62
1.12
1.16
1.16
1.19
1.75
0.38
0.31
0.19
0.25
0.25
0.19
0.38
1.31
1.31
1.00
0.88
0.88
1.12
1.31
2.06
1.94
1.38
1.38
1.38
1.50
2.06
0.750
0.750
0.625
0.562
0.875
0.438
0.750
0.938
3.75
3.75
3.12
2.81
2.53
2.00
2.00
1.50
1.50
2.25
1.25
2.00
2.50
1.88
2.75
2.00
2.00
2.75
2.00
2.50
3.00
1.81
1.81
1.50
1.31
2.06
1.22
1.72
1.78
2.16
2.16
1.75
1.62
2.38
1.41
2.03
2.16
1.94
1.94
1.62
1.50
1.31
0.38
0.38
0.31
0.25
0.50
0.25
0.38
0.38
1.50
1.50
1.31
1.25
1.50
1.12
1.38
1.50
2.25
2.25
1.94
1.75
2.50
1.62
2.12
2.25
0.875
2.00
3.00
1.75
2.09
0.38
1.38
2.12
2
2
2
2.609
2.609
2.609
2.08
2.50
2.75
2
1
4
3.000
3.000
3.000
2.25
2.25
0.438
0.438
0.438
3.075
3.50
0.625
1
1
1
1
1
1
1
4.000
4.000
4.000
4.000
4.000
4.000
4.000
3.50
3.25
2.25
2.44
2.44
2.37
3.50
0.625
0.625
0.438
0.500
0.500
0.438
0.625
2
1
1
1
1
1
1
1
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
3.97
3.97
3.25
2.94
4.44
2.62
3.75
3.98
6.000
3.84
* inner S/B
outer S/B
www.alliedlocke.com
MSR CLASS
BUSHED ROLLER STEEL
CHAIN ATTACHMENTS
A1
ATTACHMENT
MOLINE
ATTACHMENT
NO.
MSR 4328-A1
MOLINE
ATTACHMENT
NO.
MSR 1114-A2
MSR 1116-A2
MSR 1539-A2
MSR 2188-A2
MSR 6238-A2
PITCH
4.000
PITCH
6.000
6.000
3.075
4.000
6.000
A
2.00
A
2.00
2.00
2.00
1.81
2.12
B
2.00
B
2.00
2.00
0.59
1.12
1.69
C
1.12
1.12
1.25
1.00
1.62
E
2.00
F
2.00
2.00
1.88
1.75
2.62
G
2.78
G
2.56
2.56
2.50
2.66
2.94
H
2.94
H
2.92
2.62
2.59
2.75
2.84
T
0.38
AVERAGE
WEIGHT
PER FT.
LBS.
11.2
T
0.31
0.25
0.31
0.31
0.38
AVERAGE
WEIGHT
PER FT.
LBS.
8.5
6.0
8.0
7.9
12.0
A2
ATTACHMENT
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
95
MSR CLASS
BUSHED ROLLER STEEL
CHAIN ATTACHMENTS
A1/A2
ATTACHMENT
MOLINE
ATTACHMENT
NO.
MSR 3013-A1/A2
MSR 4013-A1/A2
MSR 4019-A1/A2
MSR 4216-A1/A2
MSR 6018-A1/A2
PITCH
3.000
4.000
4.000
4.000
6.000
MOLINE
ATTACHMENT
NO.
MSR 1114-A42
MSR 1116-A42
MSR 3013-A42
MSR 4013-A42
MSR 2184P-A42
A
1.47
1.38
1.38
2.00
2.00
PITCH
6.000
6.000
3.000
4.000
6.000
A
2.34
2.34
1.56
1.62
2.62
B
3.00
3.00
1.50
2.00
3.00
MSR2184P-A42
ATTACHMENT
96
E
2.00
2.50
2.50
3.25
3.00
F
1.06
1.19
1.50
2.00
2.00
E
2.00
2.00
1.25
1.25
2.00
G
1.97
1.97
1.88
2.62
2.50
H
2.16
2.16
1.91
2.83
2.53
H
3.16
3.16
2.22
2.12
3.62
J
0.53
0.59
0.75
1.00
1.00
T
0.19
0.19
0.25
0.19
0.25
T
0.50
0.50
0.25
0.38
0.50
AVERAGE
WEIGHT
PER FT.
LBS.
4.5
3.9
4.7
6.5
5.4
AVERAGE
WEIGHT
PER FT.
LBS.
6.8
6.2
4.3
3.7
12.9
A42
ATTACHMENT
www.alliedlocke.com
MSR CLASS
BUSHED ROLLER STEEL
CHAIN ATTACHMENTS
D5
ATTACHMENT
MOLINE
ATTACHMENT
NO.
MSR 303-D5 1/2
MSR 303-D5 9/16
MSR 3013-D5 5/8
MOLINE
ATTACHMENT
NO.
MSR 149-G19
PITCH
4.000
PITCH
3.000
3.000
3.000
A
2.62
B
1.50
D
0.50
0.56
0.62
H
2.09
2.09
2.41
AVERAGE
WEIGHT
PER FT.
LBS.
2.2
2.4
4.7
L
1.44
1.44
1.50
K
3.25
L
4.50
T
0.38
AVERAGE
WEIGHT
PER FT.
LBS.
11.7
G19
ATTACHMENT
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
97
MSR CLASS
BUSHED ROLLER STEEL
CHAIN ATTACHMENTS
K1
ATTACHMENT
MOLINE
ATTACHMENT
NO.
MSR 4328-K1
MOLINE
ATTACHMENT
NO.
MSR 996-K2
MSR 1116-K2
MSR 6238-K2
PITCH
4.000
PITCH
6.000
6.000
6.000
A
4.00
A
4.38
4.00
4.25
B
2.00
B
1.50
2.00
1.69
C
1.62
1.12
1.62
E
2.00
F
3.00
2.00
2.62
G
5.56
G
6.00
5.12
5.88
K2
ATTACHMENT
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
98
H
5.88
H
5.81
5.19
5.69
T
0.38
AVERAGE
WEIGHT
PER FT.
LBS.
12.2
T
0.38
0.25
0.38
AVERAGE
WEIGHT
PER FT.
LBS.
15.8
7.0
15.8
MSR CLASS
BUSHED ROLLER STEEL
CHAIN ATTACHMENTS
K1/K2
ATTACHMENT
MOLINE
ATTACHMENT
NO.
MSR 3013-K1/K2
MSR 4013-K1/K2
MSR 4019-K1/K2
MSR 2188-K1/K2
MSR 6018-K1/K2
D
PITCH
3.000
4.000
4.000
4.000
6.000
A
2.94
2.75
2.75
3.62
4.00
B
1.50
2.00
2.00
1.12
3.00
C
0.81
0.81
0.88
1.00
1.25
BOLT
DIA.
0.25
0.31
0.38
0.50
0.38
E
2.00
2.50
2.50
3.00
3.00
F
1.06
1.19
1.50
1.75
2.00
G
3.88
3.88
3.75
5.31
5.00
H
4.31
4.31
3.81
5.50
5.06
J
0.53
0.59
0.25
0.88
1.00
T
0.19
0.19
0.25
0.31
0.25
AVERAGE
WEIGHT
PER FT.
LBS.
5.1
4.4
5.3
8.8
6.2
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
99
MSR CLASS
BUSHED ROLLER STEEL
MEAT PACKING CHAIN
K2 ATTACHMENT
EVERY PITCH PLATED
PLASTIC-LINED ROLLERS
Stainless Steel
Wire Cotter
Carbon Steel
Case Hardened
Electro-Galvanized
Roller With
Plastic Insert
ElectroGalvanized
Sidebar
MSR CLASS
BUSHED ROLLER STEEL
MEAT PACKING CHAIN
K2 ATTACHMENT
EVERY PITCH PLATED
PLASTIC-LINED ROLLERS
MOLINE
PITCH
CHAIN
IN
NO.
INCHES
MSR 3420-K2 4.040
MSR 6272-K2 6.000
AVERAGE
WEIGHT
PER FT.
LBS.
11.4
9.2
LINKS
PER
10 FEET
30
20
OVER-ALL DIAMETER
WIDTH
OF
COTTERED
PIN
PITCH
C
D
MOLINE
CHAIN
NO.
AVERAGE
ULTIMATE
STRENGTH
LBS.
28,000
28,000
RECOMMENDED
MAXIMUM
WORKING
LOAD-LBS.
3,150
3,150
CHAIN AND
ATTACHMENT
CONSTRUCTION
Cottered Only
Cottered Only
ATTACHMENT
AVAILABLE
K2 Only
K2 Only
4.040
3.25
0.625
1.50
2.00
1.50
1.75
0.31
1.31
1.94
6.000
3.25
0.625
1.50
2.25
1.50
1.75
0.31
1.31
1.94
MOLINE
ATTACHMENT
NO.
MSR 3420-K2
MSR 6272-K2
PITCH
4.040
6.000
A1
4.12
4.00
B1
1.27
2.00
C1
1.25
1.38
E1
2.88
3.50
F1
1.50
2.00
G1
5.38
5.12
H1
5.56
5.31
www.alliedlocke.com
101
K2 ATTACHMENT
MEASUREMENTSMSR 3420
AND MSR 6272FURNISHED
EVERY LINK ONLY
MOLINE MSR CLASS
MEAT PACKING
CHAIN MATERIALS
ROLLER: Carbon Steel Case Hardened
Electro-galvanized
ROLLER INSERT: Plastic
PIN: Carbon Steel Case Hardened
Electro-galvanized
SIDEBARS:
No. MSR 3420Carbon Steel, Electro-galvanized
No. MSR 6272Carbon Steel, Electro-galvanized
BUSHINGS: Stainless Steel Heat Treated
COTTER: Stainless Steel Wire Cotter
OFFSET STEEL
DRIVE CHAINMXS
Class & MSS Class
Roller
Offset Sidebars
Solid
Bushing
Pin
T-Head Cotter
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
102
OFFSET STEEL
DRIVE CHAINMXS
Class & MSS Class
MOLINE OFFSET STEEL
DRIVE CHAIN MATERIALS
MXS CLASS & MSS CLASS
MOLINE
CHAIN NO.
ROLLERS
PINS
BUSHINGS
SIDEBARS
STYLE
PITCHES
IN
INCHES
STANDARD
ANSI B29.10
NUMBER
LINKS
PER
10 FEET
WEIGHT
PER FOOT
LBS.
AVERAGE
ULTIMATE
STRENGTH
LBS.
RECOMMENDED
MAXIMUM
WORKING
LOAD-LBS.
73
60
46
46
39
39
39
34
30
30
27
24
24
22
21
20
18.5
3.5
7.6
3.0
3.6
13.2
7.3
9.0
16.0
15.6
18.6
25.0
36.0
38.1
49.1
49.0
46.5
78.5
20,000
70,000
20,000
26,000
110,000
48,000
75,000
140,000
140,000
170,000
220,000
310,000
350,000
420,000
420,000
420,000
600,000
2,100
3,890
2,300
2,500
6,100
4,650
5,100
7,650
9,000
10,050
12,300
17,500
19,600
23,700
23,700
23,700
30,600
20
51.7
600,000
27,600
18.5
72.0
600,000
30,600
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.654
2.000
2.609
2.609
3.067
3.075
3.075
3.500
4.063
4.073
4.500
5.000
5.000
5.500
5.750
6.000
6.500
2,512
2,814
3,315
3,618
4,020
4,824
6.000
6.500
www.alliedlocke.com 103
OFFSET STEEL
DRIVE CHAINMXS
Class & MSS Class
AVAILABLE IN COTTERED
CONSTRUCTION ONLY
Style 1
MOLINE
CHAIN
NO.
STYLE
Style 2
PITCH
IN
INCHES
OVER-ALL DIAMETER
WIDTHOF
COTTERED
PIN
C
D
Style 3
Style 4
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.654
2.000
2.609
2.609
3.067
3.075
3.075
3.500
4.063
4.073
4.500
5.000
5.000
5.500
5.750
6.000
6.500
2.28
3.22
2.38
2.62
3.94
3.38
3.69
4.44
4.88
5.12
5.25
6.25
6.62
7.12
7.12
7.12
8.06
0.438
0.593
0.438
0.438
0.750
0.625
0.648
0.875
0.875
0.938
1.100
1.250
1.375
1.500
1.500
1.500
1.750
1.12
1.62
1.12
1.12
2.25
1.50
1.75
2.25
2.25
2.38
3.00
3.50
3.50
4.00
4.00
4.00
5.00
0.88
1.12
0.88
0.88
1.62
1.25
1.25
1.75
1.75
1.78
2.25
2.50
2.50
3.00
3.00
3.00
3.50
1.02
1.47
1.09
1.22
1.81
1.59
1.72
2.06
2.25
2.38
2.44
2.91
3.12
3.28
3.28
3.28
3.81
1.26
1.75
1.28
1.41
2.12
1.84
1.97
2.38
2.62
2.75
2.81
3.34
3.50
3.84
3.84
3.84
4.25
0.19
0.31
0.19
0.25
0.38
0.31
0.38
0.50
0.50
0.56
0.56
0.62
0.75
0.75
0.75
0.75
0.88
1.00
1.25
1.12
1.12
1.56
1.50
1.50
1.50
1.94
1.94
2.06
2.75
2.56
3.00
3.00
3.00
3.25
1.38
1.88
1.50
1.62
2.31
2.12
2.25
2.50
2.94
3.06
3.19
4.00
4.06
4.50
4.50
4.50
5.00
4.75
3.00
3.44
3.88
0.75
3.00
4.50
5.00
3.50
3.81
4.25
0.88
3.25
5.00
6.000
7.32
1.750
6.500
8.06
1.750
www.alliedlocke.com
RIVETLESS DROP
FORGED CHAIN
BAR LOOP CHAIN
Sidebar
Center Link
Connecting T-Head Pin
REGULAR TYPE
Regular Type is furnished with only the T-head pins
heat treated. These pins are symmetrical and may be
reversed when worn.
Center Link
Sidebar
X-TYPE
X-Type is furnished with all components heat treated,
and is designed to have increased exibility, transverse strength, and better operating performance.
Sidebar
Center Link
MOLINE
CHAIN
NO.
X348
X458
468
X658
X678
698
998
9118
9148
S348
S458
S468
S698
S998
S9118
PITCH
IN
INCHES
3.031
4.031
4.031
6.031
6.031
6.031
9.031
9.031
9.031
3.031
4.031
4.031
6.031
9.031
9.031
S-TYPE
S-Type is furnished with all components heat treated.
LINKS
PER
10 FEET
40
30
30
20
20
20
13.3
13.3
13.3
40
30
30
20
13.3
13.3
WEIGHT
PER FOOT
LBS.
2.2
3.2
7.5
2.6
6.7
11.4
9.0
16.0
27.0
2.4
3.5
7.9
12.1
10.4
20.4
AVERAGE ULTIMATE
STRENGTHLBS.
Head Treated Steel*
24,000
48,000
70,000
48,000
85,000
130,000
130,000
220,000
300,000
24,000
48,000
80,000
130,000
130,000
220,000
CHAIN
CONSTRUCTION
Special Pin
Special Pin
Special Pin
Special Pin
Special Pin
Special Pin
Special Pin
Special Pin
Special Pin
*Rivetless Drop Forge chain with alloy steel construction is also available on special order.
www.alliedlocke.com
105
RIVETLESS DROP
FORGED CHAIN
BAR LOOP CHAIN
AVAILABLE IN THREE TYPES
REGULAR TYPE
Regular Type is furnished with only the T-head pins
heat treated. These pins are symmetrical and may be
reversed when worn.
Regular Type
X-TYPE
X-Type is furnished with all components heat treated,
and is designed to have increased exibility, transverse strength, and better operating performance.
X-Type
S-TYPE
Barloop chain is manufactured with a standard rivetless block link and fabricated steel sidebars. Barloop
chains offer the advantage of a at steel sidebar for
welding attachments. The pins are a riveted style to
keep the sidebars locked, eliminating the chance of
chain coming apart when slack is present and the
wear between the pin and sidebar.
S-Type
MOLINE
CHAIN
NO.
X348
X458
468
X658
X678
698
998
9118
9148
S348
S458
S468
S698
S998
S9118
B
0.53
0.69
0.88
0.69
1.00
1.25
1.12
1.50
1.50
0.53
0.69
0.88
1.25
1.25
1.50
D
0.500
0.625
0.750
0.620
0.880
1.120
1.120
1.380
1.750
0.500
0.625
0.750
1.125
1.125
1.375
E
1.75
2.19
3.31
2.19
3.03
3.75
3.88
4.88
5.84
1.75
2.06
2.94
3.25
3.25
4.38
F
1.06
1.44
1.88
1.41
2.00
2.69
2.52
3.12
3.78
1.06
1.38
1.88
2.69
2.69
3.06
T
0.41
0.48
0.45
0.33
0.72
0.59
0.62
0.75
0.81
0.41
0.31
0.38
0.50
0.50
0.75
T1
0.50
0.66
1.16
0.66
0.84
1.03
1.00
1.38
1.62
0.50
0.63
1.13
1.00
1.00
1.31
X
0.75
1.02
1.62
1.02
1.31
1.56
1.56
2.00
2.50
0.75
1.02
1.63
1.56
1.56
1.97
www.alliedlocke.com
CASE CONVEYOR
CHAIN FLIGHTS
CONVEYOR
SIZE
ULTIMATE
STRENGTH
38,000 Lbs
17,275 Kg
73,000 Lbs
33,180 Kg
99,000 Lbs
45,000 Kg
150,000 Lbs
68,180 Kg
WORKING
LOAD
6,900
3,135
13,000
5,910
18,000
8,182
27,270
12,390
WEIGHT
.99
.45
2.45
1.11
3.74
1.7
14.0
6.4
A
1.375
35mm
1.97
50mm
1.97
50mm
2.95
75mm
9.88
250
11.88
300
13.88
352
15.63
397
1.375
35
1.375
35
1.375
35
1.375
35
2.22 Lbs
1 Kg
2.5 Lbs
1.14 Kg
2.8 Lbs
1.27 Kg
3.1 Lbs
1.41 Kg
10.94
278
14.88
378
18.81
178
24.69
627
29.81
757.2
2.00
50
2.00
50
2.00
50
2.00
50
2.00
50
2.36
1.07
3.41
1.55
4.45
2.02
6.01
2.73
7.39
3.36
B
1.26
32
1.65
42
2.44
62
2.76
70
C
.55
14
.75
19
1.14
29
1.18
30
D
.354
9
.47
12
.63
16
.79
20
E
.709
18
.98
25
.98
25
1.26
32
102 SERIES
10
254mm
12
305mm
14
356mm
16
406mm
142 STD SERIES
11
280mm
15
380mm
19
480mm
25
635mm
30
762mm
107
COMBINATION CHAIN
Accurately Proportioned
Pin Manufactured
Elliptical Barrels
to Exact Diameter,
Fits Accurately
Proportioned
Into Cored Barrel Block Link
Clean-Cored
Holes
Moline Combination Chain is used extensively in the cement, paper and pulp, quarrying, and mining industries for
elevating and conveying a wide variety of abrasive and
non-abrasive materials. It is also nding many uses in
general industrial assembly conveyors. It is not recommended for drive chain.
The construction of Moline Combination Chain can be
either cottered or riveted. Cottered is normally considered
standard. Pins have at areas at their ends, which lock
into the appropriately punched sidebars, preventing pin rotation during chain operation. All pin holes are clean-cored
for smooth bearing surfaces and are dimensioned for
proper pin clearance. Industry dimensional standards are
rigidly maintained and this chain may be interchanged
with links of other manufacturers.
Pitch sizes range from 1.631 to 6.050 inches; tensile
strength range extends from 12,150 to 67,500 pounds. All
Moline Combination block links except C55 and C55L
have elliptical barrels. This adds extra metal where the
sprocket to chain contact causes most chain wear.
MBP 132C has chambered barrels containing grease
which lubricates pins, helps to avoid joint freezing, and
prohibits entry of corrosive and abrasive material into the
barrel core.
Attachments are available in many of the pitch sizes for
a wide range of applications.
Combination links are symmetrical and may therefore
be operated in either direction of travel.
Brutaloy and cast steel sprockets are available for each
pitch size.
MATERIALS
MOLINE
CHAIN
BLOCK LINKS
SIDEBARS
NO.
(Inside Links)
(Outside Links)
PINS
C55
Carbon Steel, Heat Treated
C 55L
Carbon Steel, Heat Treated
C 60
Carbon Steel, Heat Treated
C 77
Carbon Steel, Heat Treated
C 102B
Carbon Steel, Heat Treated
C 1021/2
Carbon Steel, Heat Treated
C 110
Carbon Steel, Heat Treated
ALL
ALL
C 111
Carbon Steel, Heat Treated
NUMBERS
NUMBERS
C 111C
Carbon Steel, Heat Treated
C 131
Carbon Steel, Heat Treated
C 132
Carbon Steel, Heat Treated
Carbon
MBP 132
Carbon Steel, Heat Treated
MOLINE
Steel,
MBP 132C
Carbon Steel, Heat Treated
PROMAL
Heat
PW 132
Carbon Steel, Heat Treated
Treated
C 133
Carbon Steel, Heat Treated
C 188
Carbon Steel, Heat Treated
BRH 188
Carbon Steel, Heat Treated
Steel Sidebars
WEIGHTS OF COMBINATION CHAIN PARTS
108
Exposed Plain
Barrel
MOLINE
CHAIN
NO.
C 55
C 77
C 102B
C 110
C 111
C 132
MBP 132
MBP 132C
PW 132
C 188
BRH 188
STEEL
RIVETS
0.1
0.1
0.4
0.4
0.7
1.5
1.5
1.5
1.5
0.2
0.2
www.alliedlocke.com
COMBINATION CHAIN
MOLINE
CHAIN
NO.
C 55
C 55L
C 60
C 77
C 188
BRH 188
C 131
C 102B
C 102 1/2
C 111
C 111C
C 110
C 133
C 132
PW 132
MBP 132
MBP 132C
PITCH
IN
INCHES
1.631
1.631
2.307
2.308
2.609
2.609
3.075
4.000
4.040
4.760
4.760
6.000
6.000
6.050
6.050
6.050
6.050
LINKS
PER
10 FEET
74
74
52
52
46
46
39
30
30
25.5
25.5
20
20
20
20
20
20
WEIGHT
PER FOOT
LBS.
2.2
2.5
3.0
2.3
3.6
4.8
6.8
6.8
9.5
9.4
9.4
6.3
8.8
13.4
16.1
15.7
15.7
AVERAGE
ULTIMATE
STRENGTH
LBS.
12,150
12,150
25,300
14,850
18,900
18,900
32,400
32,400
48,600
48,600
48,600
32,400
60,000
67,500
67,500
67,500
67,500
RECOMMENDED
MAXIMUM
WORKING
LOAD
LBS.
1,400
1,400
2,620
1,640
2,350
2,350
3,880
5,400
6,530
7,590
7,590
5,380
5,900
11,250
11,250
11,250
11,250
CHAIN
CONSTRUCTION
Riveted or Cottered*
Riveted or Cottered*
Riveted or Cottered*
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
AVAILABLE
ATTACHMENTS
A22, G19, F30, K1
None
None
F2 K1
F2, G6, K1, K2, S1
None
F2, G6, K2
K2
K2, S1
K2, S1
K2, S1
K2
None
K2, S1
S1
S1
S1
*Furnished with pin heads all on same side. Alternating pin heads are standard; can be supplied same side if specied.
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
109
COMBINATION CHAIN
Cottered
Riveted
Cottered
Riveted
Cottered
Riveted
Chambered Barrel
Grease in chambers
keeps pin lubricated to
avoid freezing. Prevents
entry of corrosive materials which cause pin and
barrel wear.
Cottered
110
Elliptical Barrel
Out of Contact
with Tooth
Added Metal
Reduces Chain Wear
Block Link
Riveted
www.alliedlocke.com
COMBINATION CHAIN
HEAD O
F
TO CEN PIN
TER LIN
E
END OF
P
LINE IN TO CENTER
COTTER
ED
END OF
P
LINE IN TO CENTER
RIVETE
D
WIDTH
O
WEARIN F
G
THICKN
ESS SID
EBAR
OVER-A
L
OF BAR L LENGTH
REL
0.69
0.69
2.06
2.06
0.375
0.375
1.97
1.97
0.75
0.75
0.72
0.72
0.97
0.97
1.09
1.09
1.00
1.00
0.19
0.19
1.25
1.25
0.88
2.94
0.500
2.88
1.00
0.75
1.31
1.44
1.31
0.25
1.69
0.69
2.38
0.437
2.25
0.88
0.72
0.97
1.19
1.12
0.19
1.25
0.94
0.94
2.69
2.69
0.500
0.500
2.50
2.50
1.12
1.12
0.88
0.88
1.25
1.25
1.44
1.44
1.25
1.25
3.12
0.25
0.25
1.56
1.56
1.12
3.75
0.625
3.50
1.50
1.22
1.62
1.88
1.75
0.38
2.06
2.00
4.56
0.625
4.38
1.50
0.97
2.06
2.28
2.19
0.38
2.91
2.00
5.00
0.750
4.38
1.75
1.38
2.12
2.50
2.19
0.38
2.91
2.38
2.38
5.44
5.44
0.750
0.750
5.00
5.00
1.75
1.75
1.44
1.44
2.38
2.38
2.72
2.72
2.50
2.50
0.38
0.38
3.38
3.38
1.94
1.25
4.56
4.31
0.625
0.875
4.38
4.00
1.50
2.00
1.25
1.75
2.06
1.81
2.28
2.16
2.19
2.00
0.38
0.38
2.88
2.88
3.04
3.04
3.04
3.04
6.75
6.75
6.75
6.75
1.000
1.000
1.000
1.000
6.50
6.50
6.50
6.50
2.00
2.00
2.00
2.00
1.72
1.72
1.72
1.72
3.06
3.06
3.06
3.06
3.38
3.38
3.38
3.38
3.25
3.25
3.25
3.25
5.88
5.88
5.88
0.50
0.50
0.50
0.50
4.31
4.31
4.31
4.31
DIAMET
ER
SHOE
HEIGHT
OF SIDE
BAR
OF BAR
REL
OVERAL
L
RIVETE -WIDTH
D
OF PIN
DIAMET
ER
PITCH
OVER-A
L
COTTER L WIDTH
ED
MOLINE
CHAIN NO.
MAXIM
UM ALL
O
SPROC
KET FAC WABLE
E
1.631
1.631
2.307
2.308
2.609
2.609
3.075
4.000
4.040
4.760
4.760
6.000
6.000
6.050
6.050
6.050
6.050
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
111
COMBINATION
CHAIN ATTACHMENTS
A22
ATTACHMENT
A22 Attachments for
Chain No. C 55 are
Sidebar Attachments.
A22 Attachments for
Chain No. C 188 are
Block Link
Attachments as
illustrated.
T
0.25
0.38
AVERAGE
WEIGHT
PER FOOT
LBS.*
2.9
3.8
W
2.56
6.12
2.75
AVERAGE
WEIGHT
PER FOOT
LBS.*
3.0
9.0
4.5
D
BOLT
DIAMETER
0.31
0.38
PITCH
1.631
2.609
HOLE
DIAMETER
0.34
0.41
G
1.94
1.88
H
0.44
0.44
K
0.81
1.31
N
1.50
1.44
R
0.75
0.88
D
PITCH
2.308
3.075
2.609
BOLT
DIAMETER
0.31
0.38
0.31
HOLE
DIAMETER
0.34
0.44
0.34
J
1.94
2.75
2.19
K
1.31
0.94
1.25
M
1.75
4.69
2.00
C 131-F2
F2
ATTACHMENT
112
C 77-F2
C 188-F2
N
0.88
2.34
1.00
P
1.50
2.00
1.62
T
0.25
0.31
0.31
U
1.38
1.69
1.50
COMBINATION
CHAIN ATTACHMENTS
F30
ATTACHMENT
D
SLOT
LENGTH
0.78
PITCH
1.631
D1
SLOT
WIDTH
0.41
J
1.12
K
0.75
L
1.81
M
3.31
M1
0.50
P
0.75
T
0.19
W
5.31
AVERAGE
WEIGHT
PER FOOT
LBS.*
2.8
T
0.28
0.25
AVERAGE
WEIGHT
PER FOOT
LBS.*
7.7
4.5
D
PITCH
3.075
2.609
BOLT
DIAMETER
0.38
0.25
HOLE
DIAMETER
0.41
0.28
G
2.00
1.12
J
2.03
1.91
M
3.06
3.06
M1
1.75
1.75
M2
0.56
0.56
P
4.06
3.81
R
2.00
1.38
www.alliedlocke.com
113
COMBINATION
CHAIN ATTACHMENTS
G19 ATTACHMENT
D
PITCH
1.631
2.609
BOLT
DIAMETER
0.31
0.31
HOLE
DIAMETER
0.34
0.34
G
2.25
2.44
J
0.88
1.31
K
1.03
1.88
L
1.66
1.66
M
0.88
1.50
N
1.69
1.94
P
1.75
2.62
T
0.25
0.28
AVERAGE
WEIGHT
PER FOOT
LBS.*
2.7
4.2
D
PITCH
1.631
2.308
2.609
BOLT
DIAMETER
0.25
0.38
0.38
HOLE
DIAMETER
0.28
0.41
0.41
J
0.50
0.66
0.81
K
0.81
1.16
1.31
M
2.03
3.00
3.75
R
0.81
1.19
1.19
R1
1.19
2.12
T
1.16
0.22
0.22
T1
0.19
0.25
W
2.91
4.12
4.81
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
114
W1
4.19
5.12
AVERAGE
WEIGHT
PER FOOT
LBS.*
2.4*
2.4*
4.8
COMBINATION
CHAIN ATTACHMENTS
K2 ATTACHMENT
K1/K2 ATTACHMENT
D
PITCH
4.000
4.040
6.000
4.760
4.760
3.075
6.050
BOLT
DIAMETER
0.38
0.38
0.38
0.50
0.50
0.50
0.50
HOLE
DIAMETER
0.41
0.44
0.41
0.56
0.56
0.56
0.56
J
1.00
1.00
1.00
1.12
1.12
1.00
1.25
K
2.00
2.02
3.00
2.38
2.38
1.53
3.03
M
5.31
5.31
5.31
6.25
6.25
4.12
7.50
M1
1.75
1.75
1.75
2.31
2.31
1.50
2.75
R
2.81
2.81
2.88
3.50
3.50
2.62
4.00
R1
2.62
2.88
2.88
3.56
3.56
2.50
4.00
T
0.22
0.31
0.31
0.31
0.31
0.31
0.50
T1
0.38
0.38
0.38
0.38
0.38
0.38
0.50
W
6.31
6.50
6.69
7.50
7.50
5.25
9.00
W1
6.75
6.50
6.75
7.69
7.69
5.38
9.62
AVERAGE
WEIGHT
PER FOOT
LBS.
8.0
11.4
7.9
12.3
12.3
8.1
16.8
MOLINE
ATTACHMENT
NO.
C 102 1/2-S1
C 111-S1
C 111C-S1
C 132-S1
PW 132-S1
MBP 132-S1
MBP 132C-S1
C 188-S1
HOLE
DIA.
0.34
PITCH
4.040
4.760
4.760
6.050
6.050
6.050
6.050
2.609
BOLT
DIA.
0.38
D1
HOLE
DIA.
0.41
J
3.75
4.38
4.38
5.00
5.00
5.00
5.00
2.62
J
K
M M1 N
.81 1.31 4.19 1.25 .62
K
1.00
1.00
1.00
1.28
1.28
1.28
1.28
0.62
AVERAGE
WEIGHT
PER FOOT
O
R
R1
T
T1
W W1
LBS.
3.75 2.12 2.12 0.25 0.25 5.06 5.12
5.2
P
2.88
3.50
3.50
4.00
4.00
4.00
4.00
2.19
T
0.38
0.38
0.38
0.50
0.50
0.50
0.50
0.25
W
3.72
4.19
4.19
5.44
5.44
5.44
5.44
2.12
AVERAGE
WEIGHT
PER FOOT
LBS.*
12.2
12.5
12.5
18.8
21.5
21.1
21.1
4.7
115
H CLASS
MILL CHAIN
LINKS
T-Head Pin
Reinforcing
Wearing
Shoes
Accurately Cored
Pin Holes
PINS
ALL
NUMBERS
ALL
NUMBERS
Moline
Promal
Carbon Steel,
Heat-Treated
116
www.alliedlocke.com
H CLASS
MILL CHAIN
Cottered
Riveted
MOLINE
CHAIN
NO.
H 60
H 74
H 78
H 79
H 82
H 87
H 124
PITCH
IN
INCHES
2.308
2.609
2.609
2.609
3.075
4.000
4.000
LINKS
PER
10 FEET
52
46
46
46
39
30
30
WEIGHT
PER FOOT
LBS.
2.1
3.0
4.2
4.8
5.5
6.5
8.8
AVERAGE
ULTIMATE
STRENGTH
LBS.
9,450
13,500
22,200
24,300
27,000
33,750
40,500
RECOMMENDED
MAXIMUM
WORKING
LOAD
LBS.
1,560
1,850
2,810
2,810
3,580
4,450
6,180
CHAIN
CONSTRUCTION
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
Riveted or Cottered
AVAILABLE
ATTACHMENTS
H2, K1
F4
A1, F4, F8, G19, H1, H2, K1, K2
None
K2
None
K2
MOLINE
CHAIN
NO.
H 60
H 74
H 78
H 79
H 82
H 87
H 124
PITCH
2.308
2.609
2.609
2.609
3.075
4.000
4.000
MAXIMUM
ALLOWABLE OVER-ALL DIAMETER
SPROCKET
WIDTH
OF
FACE
COTTERED
PIN
A
C
D
0.75
2.62
0.312
1.00
3.12
0.375
1.12
3.31
0.500
1.12
3.31
0.500
1.25
3.88
0.562
1.50
4.38
0.625
1.62
4.88
0.750
OVER-ALL
WIDTH
RIVETED
E
2.62
2.88
3.19
3.19
3.88
4.19
4.75
HEIGHT
OF
SIDEBARS
F
0.75
1.00
1.12
1.12
1.25
1.38
1.56
END OF
HEAD OF
PIN TO
DIAMETER PIN TO
CENTER
OF
CENTER
LINE
BARREL
LINE
COTTERED
H
J
K
0.75
1.25
1.38
0.88
1.50
1.62
0.88
1.56
1.62
0.88
1.56
1.62
1.22
1.88
2.00
1.38
2.06
2.12
1.44
2.25
2.50
END OF
PIN TO
CENTER
LINE
RIVETED
L
1.38
1.62
1.62
1.62
2.00
2.12
2.50
BEARING
LENGTH
X
1.50
1.66
1.88
1.88
2.12
2.38
2.75
www.alliedlocke.com
117
H CLASS
MILL CHAIN
ATTACHMENTS
A1 ATTACHMENT
D
BOLT
DIAMETER
0.38
0.38
PITCH
2.609
2.609
MOLINE
ATTACHMENT
NO.
PITCH
H 74-F4
2.609
H 78-F4
2.609
HOLE
DIAMETER
0.41
0.41
D
BOLT
DIA.
0.31
0.38
HOLE
DIA.
0.34
0.41
BOLT
DIA.
0.38
0.38
J
0.56
0.56
K
1.31
1.31
M
3.00
3.00
N
2.19
2.19
R
1.62
1.62
F4 ATTACHMENT
118
T
0.31
0.31
AVERAGE
WEIGHT
PER FOOT
LBS.
4.8
4.8
AVERAGE
WEIGHT
PER FOOT
LBS.
6.0
8.1
H CLASS
MILL CHAIN
ATTACHMENTS
F8 ATTACHMENT
W
3.00
AVERAGE
WEIGHT
PER FOOT
LBS.
10.0
T
0.25
AVERAGE
WEIGHT
PER FOOT
LBS.
5.9
D
PITCH
2.609
BOLT
DIAMETER
0.44
HOLE
DIAMETER
0.47
J
1.75
K
1.50
M
2.19
P
1.19
T
0.62
D
PITCH
2.609
BOLT
DIAMETER
0.38
HOLE
DIAMETER
0.41
G
2.75
J
1.75
K
1.62
L
1.25
M
2.62
N
2.19
P
3.50
G19 ATTACHMENT
119
H CLASS
MILL CHAIN
ATTACHMENTS
H1 ATTACHMENT
MOLINE
ATTACHMENT
NO.
H 78-H1
MOLINE
ATTACHMENT
NO.
H 60-H2
H 78-H2
J
3.62
K
0.50
P
3.06
T
0.12
W1
1.12
AVERAGE
WEIGHT
PER FOOT
LBS.
6.8
W1
1.00
1.06
AVERAGE
WEIGHT
PER FOOT
LBS.
3.4
6.5
J
2.44
3.50
K
2.12
2.31
P
2.06
2.94
T
0.09
0.12
H2 ATTACHMENT
120
H CLASS
MILL CHAIN
ATTACHMENTS
K1 ATTACHMENT
W
4.00
5.00
AVERAGE
WEIGHT
PER FOOT
LBS.
2.8
5.6
W
5.00
5.50
6.38
AVERAGE
WEIGHT
PER FOOT
LBS.
6.0
7.6
11.3
D
PITCH
2.308
2.609
BOLT
DIAMETER
0.31
0.38
HOLE
DIAMETER
0.34
0.41
J
0.75
0.81
K
1.06
1.25
M
3.00
4.00
R
1.12
1.38
T
0.19
0.22
D
PITCH
2.609
3.075
4.000
K2 ATTACHMENT
BOLT
DIAMETER
0.38
0.38
0.38
HOLE
DIAMETER
0.41
0.41
0.41
J
0.81
0.88
1.19
K
1.08
1.00
1.19
M
4.00
4.25
5.25
M1
1.12
1.31
1.94
R
2.12
2.19
2.88
T
0.25
0.31
0.31
121
H CLASS REFUSE
DRAG CHAIN
Grease Chambers
Keep Pin Lubricated
To Reduce Abrasive Wear
Vertical Members
Protect Pins,
Act As Side Scrapers
Rear Of Barrel
Rounded For Good
Sprocket Contact
Cast Lugs
Prevent Pin
Rotation
Lubrication Pore
T-Head Pin
Heavy, Wide
Wearing Shoes
MOLINE
CHAIN
NO.
H 102
H 104
H 110
H 112
H 116
H 120
H 480
CAST
LINKS
PINS
ALL
NUMBERS
ALL
NUMBERS
Moline
Promal
Carbon Steel,
Heat-Treated
www.alliedlocke.com
H CLASS REFUSE
DRAG CHAIN
MOLINE
CHAIN
NO.
H 102
H 104
H 110
H 112
H 116
H 120
H 480
PITCH
IN
INCHES
5.000
6.000
6.000
8.000
8.000
6.000
8.000
LINKS
PER
10 FEET
24
20
20
15
15
20
15
WEIGHT
PER FOOT
LBS.
10.7
8.0
12.9
10.8
14.6
18.5
18.1
RECOMMENDED
MAXIMUM
WORKING
LOAD
LBS.
6,100
6,100
6,100
6,100
6,100
8,200
8,650
AVERAGE
ULTIMATE
STRENGTH
LBS.
36,400
36,400
36,400
36,400
36,400
49,400
52,000
CHAIN
CONSTRUCTION
Riveted Only
Riveted Only
Riveted Only
Riveted Only
Riveted Only
Riveted Only
Riveted Only
PITCH
IN
INCHES
5.000
6.000
6.000
8.000
8.000
6.000
8.000
MAXIMUM
ALLOWABLE
SPROCKET
FACE
A
6.38
4.12
9.00
9.00
13.00
8.75
11.12
DIAMETER
OF
PIN
D
0.625
0.625
0.625
0.625
0.625
0.750
0.750
HEIGHT
OF
SIDEBAR
F
1.50
1.50
1.50
1.50
1.62
2.00
2.00
OVER-ALL
WIDTH
N
9.75
7.50
12.50
12.50
16.38
12.88
16.00
OVER-ALL
LENGTH
OF
BARREL
X
7.75
5.31
10.62
10.62
14.44
10.19
12.69
www.alliedlocke.com
123
COMBINATION REFUSE
DRAG CHAIN
Symmetrically
Designed
Block Link
Holes To
Factory Packed
Grease Chambers
Heavy Steel,
Accurately
Machined
Sidebars
Curved Rear
Of Barrel
Offers Proper
Sprocket Contact
Vertical Members
Protect Pins,
Act As Side Scrapers
124
Grease chambers cored into the block link barrels are factory lled. This lubrication method
prevents freezing of chain joints and reduces
barrel wear, thereby requiring little attention.
Combination Refuse Drag Chain is available
in riveted construction only.
Chain should operate in the direction of the
scraper faces; barrel sides which make
sprocket contact are curved for efcient
sprocket operation. Brutaloy sprockets are
available in both 6 and 8 inch pitch sizes.
MOLINE
NO.
6104
6110
8480
BLOCK LINKS
ALL NUMBERS
Moline Promal
PINS
Carbon Steel, Heat Treated
Carbon Steel, Heat Treated
Alloy, Heat Treated
SIDEBARS
ALL NUMBERS
Carbon Steel,
Heat Treated
COMBINATION REFUSE
DRAG CHAIN
MOLINE
CHAIN
NO.
6104
6110
8480
PITCH
IN
INCHES
6.000
6.000
8.000
LINKS
PER
10 FEET
20
20
15
WEIGHT
PER FOOT
LBS.
10.0
12.2
20.6
RECOMMENDED
MAXIMUM
WORKING
LOAD
LBS.
9,000
9,000
12,000
AVERAGE
ULTIMATE
STRENGTH
LBS.
54,500
54,500
73,000
CHAIN
CONSTRUCTION
Riveted Only
Riveted Only
Riveted Only
PITCH
6.000
6.000
8.000
MAXIMUM
ALLOWABLE
SPROCKET
FACE
A
3.75
9.00
11.12
DIAMETER
OF
PIN
D
0.750
0.750
0.875
HEIGHT
OF
SIDEBAR
F
1.50
1.50
2.00
OVER-ALL
WIDTH
N
7.50
12.75
16.00
THICKNESS
OF
SIDEBAR
T
0.38
0.38
0.50
OVER-ALL
LENGTH
OF
BARREL
X
5.50
10.50
12.75
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
125
TRANSFER CHAIN
H CLASS TRANSFER CHAIN
H78A
H78B
H138
H130
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
126
H CLASS
TRANSFER CHAIN
H78A
H130
H131
MOLINE
CHAIN
NO.
H 78 A
H 78 B
H 130
H 131
H 138
H78B
H138
MOLINE
CHAIN
NO.
H 78A
H 78B
H 130
H 131
H 138
PITCH
IN
INCHES
2.609
2.609
4.000
4.000
4.000
STYLE
OF
TOP
A
B
A
A
B
LINKS
PER
10 FEET
46
46
30
30
30
CAST LINKS
PINS
ALL NUMBERS
Moline Promal
ALL NUMBERS
Carbon Steel,
Heat-Treated
AVERAGE
ULTIMATE
STRENGTH
LOAD
LBS.
20,800
20,800
18,200
29,900
19,500
WEIGHT
PER FOOT
LBS.
5.6
6.1
5.2
8.4
5.8
RECOMMENDED
MAXIMUM
WORKING
LOAD
LBS.
2,820
2,820
2,440
4,700
2,440
CHAIN
CONSTRUCTION
Riveted Only
Riveted Only
Riveted Only
Riveted Only
Riveted Only
WIDTH
F
1.00
1.00
1.06
1.56
1.06
J
1.12
1.12
1.16
1.47
1.16
P
1.69
1.69
1.69
2.25
1.69
W
2.81
2.81
2.81
3.44
2.81
OF TOP
HT
E1
1.88
1.88
1.62
2.50
1.62
E
1.12
1.12
1.00
1.62
1.00
LL HEIG
CE
Dp
0.500
0.500
0.500
0.625
0.500
MAXIM
UM
ALLOW
AB
SPROC LE
KET FA
DIAMET
E
OF PIN R
DIAMET
E
BARREL R OF
Db
0.88
0.88
1.00
1.25
1.00
OVER-A
C
1.56
1.56
1.62
1.94
1.62
CENTER
O
PIN TO F
TOP
Br
1.62
1.62
1.62
2.06
1.62
HEIGHT
O
SIDEBA F
R
Ar
3.25
3.25
3.25
4.00
3.25
OVER-A
LL
OF BAR LENGTH
REL
PITCH
2.609
2.609
4.000
4.000
4.000
HEAD O
F
CENTER PIN TO
LINE
STYLE
OF
TOP
A
B
A
A
B
END OF
P
CENTER IN TO
L
RIVETE INED
CHAIN
NO.
H 78A
H 78B
H 130
H 131
H 138
OVER-A
L
RIVETE L WIDTHD
www.alliedlocke.com
127
COMBINATION
TRANSFER CHAIN
BLOCK LINKS
ALL NUMBERS
Moline Promal
PINS
ALL NUMBERS
Carbon Steel,
Heat-Treated
C55A
TOP VIEW
C55A
BOTTOM VIEW
C55B
C55D
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
128
SIDEBARS
Carbon Steel
COMBINATION
TRANSFER CHAIN
ORDERING AND APPLICATION DATA
C55A
C55B
C55D
MOLINE
CHAIN
NO.
C 55 A
C 55 B
C 55 D
STYLE
OF
TOP
A
B
D
PITCH
IN
INCHES
1.631
1.631
1.631
LINKS
PER
10 FEET
74
74
74
CHAIN
CONSTRUCTION
Riveted Only
Riveted Only
Riveted Only
E1
1.25
1.25
1.25
THICKN
ES
SIDEBA S OF
R
E
0.69
0.69
0.69
OVER-A
L
OF BAR L LENGTH
REL
MAX. A
LL
SPROC OWANCE
KET FAC
E
DIAMET
ER OF
PIN
D
0.375
0.375
0.375
OVER-A
L
HEIGHT L
Db
0.72
0.72
0.72
CENTER
O
TO TOP F PIN
C
1.00
1.00
1.00
HEIGHT
O
SHOUL F
DER
A
2.00
2.00
2.00
HEIGHT
O
SIDEBA F
R
PITCH
1.631
1.631
1.631
DIAMET
E
BARREL R OF
STYLE
OF
TOP
A
B
D
HEAD O
F
LINE - R PIN TO CENTE
R
IVETED
MOLINE
CHAIN
NO.
C 55 A
C 55 B
C 55 D
OVER-A
L
RIVETE L WIDTHD
F
0.75
0.75
0.88
F1
0.75
0.75
0.88
J
0.88
0.88
0.88
P
1.25
1.25
1.25
T
0.19
0.19
0.19
www.alliedlocke.com
129
400 CLASS
PINTLE CHAIN
Barrel
Sidebar
LINKS
PINS
ALL NUMBERS
Moline Promal
ALL NUMBERS
Carbon Steel,
Heat-Treated
MOLINE
CHAIN
NO.
0442
0445
0452
0455
0462
0477
0488
4103
130
PITCH
IN
INCHES
1.375
1.630
1.506
1.630
1.634
2.308
2.609
3.075
LINKS
PER
10 FEET
88
74
80
74
73
52
46
39
WEIGHT
PER FOOT
LBS.
1.4
1.5
2.0
1.9
2.5
2.0
2.9
5.7
AVAILABLE
ATTACHMENTS
None
A1, F2, K1
A88, D5, E1, K1
D15, F2, K1
A12, F2, K1
A22, D5, F2, F16, G1, G19, K1, K2
F2, G19, K1, K2
F2, F29, K2
400 CLASS
PINTLE CHAIN
Cottered
Riveted
MOLINE
CHAIN
NO.
0442
0445
0452
0455
0462
0477
0488
4103
PITCH
1.375
1.630
1.506
1.630
1.634
2.308
2.609
3.075
MAXIMUM
ALLOWABLE OVER-ALL
SPROCKET
WIDTH
FACE
COTTERED
A
C
0.62
2.03
0.69
2.03
0.62
2.22
0.69
2.22
0.88
2.56
0.69
2.38
0.94
2.94
1.12
3.56
DIAMETER OVER-ALL
OF
WIDTH
PIN
RIVETED
D
E
0.31
1.88
0.31
1.88
0.38
2.06
0.38
2.06
0.44
2.38
0.44
2.25
0.44
2.75
0.75
3.25
HEIGHT
OF
SIDEBARS
F
0.75
0.75
0.84
0.84
0.94
1.00
0.94
1.50
END OF
HEAD OF
PIN TO
DIAMETER PIN TO
CENTER
OF
CENTER
LINE
BARREL
LINE
COTTERED
H
J
K
0.56
0.97
1.06
0.62
0.97
1.06
0.69
1.03
1.19
0.62
1.03
1.19
0.72
1.25
1.31
0.72
1.16
1.22
0.88
1.44
1.50
1.25
1.75
1.81
END OF
PIN TO
CENTER
LINE
RIVETED
L
0.91
0.91
1.03
1.03
1.12
1.09
1.31
1.50
BEARING
LENGTH
X
1.06
1.06
1.09
1.12
1.44
1.25
1.62
1.88
www.alliedlocke.com
131
400 CLASS
PINTLE CHAIN
ATTACHMENTS
A1 ATTACHMENT
T
0.19
0.19
AVERAGE
WEIGHT
PER FOOT
LBS.
1.8
1.8
T
0.19
0.19
AVERAGE
WEIGHT
PER FOOT
LBS.
3.0
3.0
D
BOLT
DIAMETER
0.25
0.25
PITCH
1.630
1.630
HOLE
DIAMETER
0.28
0.28
G
1.59
1.59
J
0.38
0.38
K
0.75
0.75
N
1.16
1.16
R
0.88
0.88
A12 ATTACHMENT
D
PITCH
1.634
1.634
BOLT
DIAMETER
0.25
0.25
HOLE
DIAMETER
0.28
0.28
G
2.44
2.44
J
0.44
0.44
K
0.78
0.78
N
2.00
2.00
N1
1.38
1.38
R
0.88
0.88
A22 ATTACHMENT
132
D
PITCH
2.308
BOLT
DIAMETER
0.31
HOLE
DIAMETER
0.34
G
1.94
K
1.12
N
1.50
R
0.88
T
0.25
AVERAGE
WEIGHT
PER FOOT
LBS.
2.5
www.alliedlocke.com
400 CLASS
PINTLE CHAIN
ATTACHMENTS
A88 ATTACHMENT
D
BOLT
DIAMETER
0.19
PITCH
1.506
HOLE
DIAMETER
0.22
G
2.25
K
0.75
N
1.78
R
0.94
T
0.19
PITCH
1.506
2.308
G
2.50
2.75
J
0.38
0.62
K
0.75
1.12
L
1.59
1.50
R
0.56
0.62
AVERAGE
WEIGHT
PER FOOT
LBS.
3.0
3.1
R
0.50
AVERAGE
WEIGHT
PER FOOT
LBS.
3.4
PITCH
1.630
G
2.62
J
0.38
K
0.75
L
1.75
AVERAGE
WEIGHT
PER FOOT
LBS.
2.6
133
400 CLASS
PINTLE CHAIN
ATTACHMENTS
F16 ATTACHMENT
PITCH
2.308
J
1.38
K
1.25
T
0.19
AVERAGE
WEIGHT
PER FOOT
LBS.
3.3
W
4.12
F2 ATTACHMENT
D
PITCH
1.630
1.630
1.634
2.308
2.609
3.075
BOLT
DIAMETER
0.19
0.19
0.19
0.31
0.31
0.38
HOLE
DIAMETER
0.22
0.22
0.22
0.34
0.34
0.41
J
1.28
1.25
1.31
2.00
1.97
2.66
K
0.62
0.62
0.62
0.75
1.06
1.25
M
1.06
1.06
1.06
1.75
2.03
2.22
N
0.94
0.94
1.00
1.44
1.38
2.00
P
0.91
0.81
0.81
1.50
1.50
1.91
T
0.16
0.16
0.16
0.25
0.28
0.31
W
1.50
1.81
2.09
2.62
2.88
3.12
AVERAGE
WEIGHT
PER FOOT
LBS.
2.0
2.7
2.5
3.7
4.5
8.1
www.alliedlocke.com
400 CLASS
PINTLE CHAIN
ATTACHMENTS
F29 ATTACHMENT
W
3.12
AVERAGE
WEIGHT
PER FOOT
LBS.
9.6
T
0.25
AVERAGE
WEIGHT
PER FOOT
LBS.
3.7
T
0.19
0.22
AVERAGE
WEIGHT
PER FOOT
LBS.
3.3
4.4
D
PITCH
3.075
BOLT
DIAMETER
0.38
HOLE
DIAMETER
0.41
J
2.69
K
2.62
M
2.22
P
1.25
T
0.41
G1 ATTACHMENT
D
PITCH
2.308
BOLT
DIAMETER
0.31
HOLE
DIAMETER
0.34
G
1.44
J
1.75
K
1.12
M
2.62
P
3.50
R
1.31
G19 ATTACHMENT
D
PITCH
2.308
2.609
BOLT
DIAMETER
0.38
0.31
HOLE
DIAMETER
0.41
0.34
G
2.28
2.69
K
1.31
1.38
L
1.12
1.38
M
2.25
2.62
N
1.72
2.00
P
3.25
3.62
www.alliedlocke.com
135
400 CLASS
PINTLE CHAIN
ATTACHMENTS
K1 ATTACHMENT
W
2.81
2.75
2.88
3.25
3.94
4.75
AVERAGE
WEIGHT
PER FOOT
LBS.
2.1
2.5
2.3
3.2
2.9
3.9
W
4.00
4.50
5.25
AVERAGE
WEIGHT
PER FOOT
LBS.
2.9
4.6
8.0
D
PITCH
1.630
1.506
1.630
1.634
2.308
2.609
BOLT
DIAMETER
0.19
0.19
0.25
0.25
0.25
0.31
HOLE
DIAMETER
0.22
0.22
0.28
0.28
0.28
0.34
J
0.44
0.44
0.44
0.50
0.66
0.66
K
0.72
0.75
0.81
0.81
1.16
1.31
M
2.06
2.06
2.00
2.38
3.00
3.81
R
0.94
0.72
0.81
0.94
1.38
1.38
T
0.12
0.16
0.16
0.16
0.16
0.19
D
PITCH
2.308
2.609
3.075
BOLT
DIAMETER
0.25
0.31
0.50
HOLE
DIAMETER
0.28
0.34
0.56
J
0.66
0.66
0.84
K
1.16
1.28
1.53
M
3.00
3.62
4.12
M1
0.81
1.25
1.50
R
1.56
2.12
2.62
T
0.12
0.19
0.31
K2 ATTACHMENT
136
700 CLASS
PINTLE CHAIN
RIVETED
Plain
Straight
S/B
MS
Curved
S/B
Plain
Straight
S/B
MS
Curved
S/B
COTTERED
MOLINE
CHAIN
NO.
720
720S
MS 720S
730
MS 730
788
PITCH
6.000
6.000
6.000
6.000
6.000
2.609
END OF
MAXIMUM
HEAD OF
PIN TO
ALLOWABLE OVER-ALL DIAMETER OVER-ALL
HEIGHT DIAMETER PIN TO
CENTER
SPROCKET WIDTH
OF
WIDTH
OF
OF
CENTER
LINEFACE
COTTERED
PIN
RIVETED SIDEBARS BARREL
LINE
COTTERED
A
C
D
E
F
H
J
K
1.12
3.44
0.69
3.31
1.50
1.38
1.62
1.81
1.12
3.81
0.75
3.69
1.56
1.44
1.75
2.06
1.12
3.81
0.75
3.69
1.56
1.44
1.75
2.06
1.12
3.81
0.75
3.69
1.75
1.50
1.81
2.00
1.12
3.81
0.75
3.69
1.75
1.50
1.81
2.00
0.94
3.31
0.56
3.19
1.19
0.88
1.56
1.75
END OF
PIN TO
CENTER
LINE- BEARING
RIVETED LENGTH
L
X
1.69
1.81
1.94
1.88
1.94
1.88
1.88
2.00
1.88
2.00
1.62
1.62
www.alliedlocke.com
700 CLASS
PINTLE CHAIN
ATTACHMENTS
AD474
ATTACHMENT
A2
ATTACHMENT
Attachment No.
730-A2, available
without bosses only
Attachment Nos.
720-A2 and
MS 720S-A2, available
with bosses only
T
0.62
0.62
0.44
AVERAGE
WEIGHT
PER FOOT
LBS.
6.5
8.8
8.6
T
0.50
AVERAGE
WEIGHT
PER FOOT
LBS.
6.5
T
0.62
1.56
AVERAGE
WEIGHT
PER FOOT
LBS.
7.3
9.0
D
PITCH
6.000
6.000
6.000
BOLT
DIAMETER
0.62
0.62
0.62
HOLE
DIAMETER
0.69
0.69
0.69
G
3.56
3.56
3.56
K
1.50
1.94
1.94
M
2.12
2.12
2.12
N
2.72
2.75
2.75
R
4.00
3.75
3.81
D
PITCH
6.000
BOLT
DIAMETER
0.62
HOLE
DIAMETER
0.66
G
7.00
K
2.25
M
2.50
N
3.38
R
2.75
D
PITCH
6.000
6.000
BOLT
DIAMETER
0.62
0.62
HOLE
DIAMETER
0.69
0.66
G
3.25
3.88
J
0.31
0.78
K
3.00
3.00
N
2.44
3.00
R
3.88
3.88
A42
ATTACHMENT
139
700 CLASS
PINTLE CHAIN
ATTACHMENTS
A53 ATTACHMENT
D
PITCH
6.000
6.000
BOLT
DIAMETER
0.50
0.50
HOLE
DIAMETER
0.56
0.56
G
2.69
2.69
K
3.00
3.00
N
1.94
1.94
R
3.75
3.00
T
0.31
0.31
D
PITCH
6.000
6.000
BOLT
DIAMETER
0.62
0.62
HOLE
DIAMETER
0.66
0.66
G
3.38
3.38
K
3.00
3.00
N
2.75
2.69
P
1.94
1.88
R
1.38
1.38
AM116 ATTACHMENT
140
T
1.00
1.00
AVERAGE
WEIGHT
PER FOOT
LBS.
6.3
7.3
AVERAGE
WEIGHT
PER FOOT
LBS.
7.8
8.8
700 CLASS
PINTLE CHAIN
ATTACHMENTS
F2 ATTACHMENT
D
PITCH
6.000
6.000
6.000
6.000
6.000
BOLT
DIAMETER
0.50
0.38
0.38
0.38
0.38
HOLE
DIAMETER
0.56
0.44
0.44
0.44
0.44
J
3.88
3.88
3.88
3.84
3.84
K
3.00
3.00
3.00
3.00
3.00
M
4.25
4.25
4.25
4.25
4.25
M1
1.94
1.94
1.94
1.94
1.94
M2
1.31
1.31
1.31
1.31
1.31
T
0.25
0.25
0.25
0.38
0.38
U
2.00
2.00
2.00
2.00
2.00
W
5.31
5.31
5.31
5.31
5.31
AVERAGE
WEIGHT
PER FOOT
LBS.
6.4
7.7
7.7
7.5
7.5
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
141
700 CLASS
PINTLE CHAIN
ATTACHMENTS
F22 ATTACHMENT
W
5.50
5.50
5.50
5.50
5.50
AVERAGE
WEIGHT
PER FOOT
LBS.
12.8
13.8
13.8
13.8
13.8
W
5.50
5.50
5.50
5.50
5.50
AVERAGE
WEIGHT
PER FOOT
LBS.
13.6
14.6
14.6
14.6
14.6
D
PITCH
6.000
6.000
6.000
6.000
6.000
BOLT
DIAMETER
0.38
0.38
0.38
0.38
0.38
HOLE
DIAMETER
0.44
0.44
0.44
0.44
0.44
J
6.00
6.00
6.00
6.00
6.00
K
3.00
3.00
3.00
3.00
3.00
M
3.75
3.75
3.75
3.75
3.75
M1
2.62
2.62
2.62
2.62
2.62
T
0.31
0.31
0.31
0.31
0.31
U
2.38
2.38
2.38
2.38
2.38
D
PITCH
6.000
6.000
6.000
6.000
6.000
BOLT
DIAMETER
0.38
0.38
0.38
0.38
0.38
HOLE
DIAMETER
0.44
0.44
0.44
0.44
0.44
J
8.00
8.00
8.00
8.00
8.00
K
3.00
3.00
3.00
3.00
3.00
M
3.75
3.75
3.75
3.75
3.75
M1
4.50
4.50
4.50
4.50
4.50
T
0.31
0.31
0.31
0.31
0.31
U
2.38
2.38
2.38
2.38
2.38
www.alliedlocke.com
700 CLASS
PINTLE CHAIN
ATTACHMENTS
K2 ATTACHMENT
D
PITCH
6.000
6.000
BOLT
DIAMETER
0.50
0.50
HOLE
DIAMETER
0.56
0.56
J
0.94
1.00
K
1.69
1.69
M
6.00
6.00
M1
2.62
2.62
R
4.12
4.00
T
0.31
0.31
W
7.50
7.31
AVERAGE
WEIGHT
PER FOOT
LBS.
8.5
8.6
143
700 CLASS
PINTLE CHAIN
ATTACHMENTS
M-1 ATTACHMENT
D
BOLT
DIAMETER
0.75
0.75
0.75
0.75
0.75
PITCH
6.000
6.000
6.000
6.000
6.000
HOLE
DIAMETER
0.81
0.81
0.81
0.81
0.81
D1
1.50
1.50
1.50
1.50
1.50
J
1.50
1.50
1.50
1.62
1.62
K
3.00
3.00
3.00
3.00
3.00
P
3.00
3.00
3.00
3.25
3.25
T
0.75
0.75
0.75
0.75
0.75
W
3.00
3.00
3.00
3.00
3.00
AVERAGE
WEIGHT
PER FOOT
LBS.
6.0
6.9
6.9
7.9
7.9
PDF2 ATTACHMENT
MOLINE
ATTACHMENT
NO.
PDF2
BOLT
DIAMETER
0.50
D1
HOLE
DIAMETER
0.56
M3
P
T
U
1.31 3.12 0.38 0.50
W
5.50
AVERAGE
WEIGHT
EACH
LBS.
5.0
W
5.50
5.50
AVERAGE
WEIGHT
EACH
LBS.
6.0
7.8
PDF22 ATTACHMENT
MOLINE
ATTACHMENT
NO.
PDF22-6
PDF22-8
144
BOLT
DIAMETER
0.38
0.38
D1
HOLE
DIAMETER
0.44
0.44
M3
2.62
4.50
P
5.38
7.38
T
0.38
0.38
U
0.88
0.88
www.alliedlocke.com
SS-715
MSS78
SS715-F22
Pitch
in
Inches
Links
Per
10
Feet
Weight
Per
Foot
in Lbs.
Average
Ultimate
Strength
in Lbs.
Over-All
Width Detachable
Cottered
C
Pin
Dia.
D
SS715
6.00
20
3.9
33,000
2.82
.562
MSS78
2.609
46
4.2
24,000
2.70
.500
1.25
ALI
Catalog
No.
.88
1.28
1.42
Thickness
of
Side
Bar
T
Distance
Between
Side
Bars
W
Over-All
Length
of
Bushing
X
.25
1.19
1.69
.25
1.19
1.62
ALI
Attachment
No.
Pitch
in
Inches
Bolt
Diameter
Hole
Diameter
SS715-F226
SS715-F228
6.0
6.0
0.38
0.38
0.44
0.44
6.21
7.88
3.00
3.00
3.75
3.75
M1
2.62
4.50
Weight
Each
Lbs.
0.31
0.31
2.38
2.38
5.50
5.50
4.5
5.4
NCS720S
ALI
Catalog
No.
Pitch
in
Inches
NCS720S
NH78
6.00
2.609
Links
Per
10
Feet
20
46
Weight
Per
Foot
in Lbs.
1.5
1.5
Average
Ultimate
Strength
in Lbs.
6,000
3,100
Maximum Over-All
Allowable
Width
Sprocket Detachable Pin
Face
Cottered Dia.
A
C
D
1.12
4.29
.93
.94
.38
NH78-F2
NH78
NCS720S-F22
Over-All Height
Head of End of Pin to End of Pin to
Width
of
Dia. Pin to Center Line
Center Line
Fixed Side
of
Center Detachable
Fixed
Bearing
Riveted Bar Barrel Line
Cottered
Riveted
Length
E
F
H
J
K
L
X
1.81
3.19 1.12
.88
1.59
1.62
ALI
Attachment
No.
NCS720S-F226
NCS720S-F228
Pitch
in
Inches
6.000
6.000
Bolt
Diameter
0.50
0.50
ALI
Attachment
No.
NH78-F2
Pitch
in
Inches
2.609
Bolt
Diameter
0.38
Hole
Diameter
0.56
0.56
J
6.14
7.50
K
3.00
3.00
M
3.75
3.75
M1
2.62
4.50
T
0.25
0.25
U
2.38
2.38
W
5.50
5.50
Hole
Diameter
0.41
J
4.44
K
1.50
M
2.38
M1
2.38
T
0.25
U
1.62
W
3.12
www.alliedlocke.com 145
900 CLASS
PINTLE CHAIN
One
Accurately
Machined
Hole
Renewable
Bushings
Large
Sliding
Surface
Lugs To
Prevent
Pin Rotation
Cotter
Protecting
Lugs
Cast-Rib
Reinforcement
Wearing Shoe
Moline 900 Class Pintle Chain, sometimes referred to as sugar mill or intermediate carrier
chain is used extensively
in sugar mills. Multiple strands of 900 Pintle
Chain, available with one or two holes per link,
can be tted with overlapping beaded carrier slats
to form a continuous apron conveyor for intermediate carrier service.
The pin holes at the closed end of the 900
Class link are provided with smooth bushings
which are press-tted into the links and keyed into
place. The bushings are renewable and can be
driven out and replaced when they become worn.
900 Class Pintle Chain is designed with dual
barrels, one on each side of the open end of the
links, to accommodate double sprockets. The purpose of this driving method is to eliminate the
possibility of material build-up in the sprocket contact area, which often causes the chain to jump
the sprocket. Heavy ribs rigidly reinforce these driving barrels.
Moline Promal links, with tensile strength of
32,500 pounds, are available with large sliding
surfaces to reduce chain wear and prolong chain
life. Broad wearing surfaces and heavy cross sections team up to provide a substantial link which is
made according to manufacturers standards and
can perfectly replace links made by other manufacturers.
Brutaloy sprockets for Moline 900 Class Pintle
Chain are readily available in 3.170 inches. 900
Class Pintle Chain should only be allowed to
travel in one direction; links should always run in
the direction of their closed narrow end.
Available in cottered construction only, 900
Class Chain is assembled with T-headed pins
which are locked into place by two lugs cast on
the ends of the driving barrels to prevent pin rotation. Pin rotation during operation would result in
wear on the inside of the bushing. Both the head
of the pin and the cottered end of the pin are protected by cast lugs on the barrel end of the links.
Moline 900 Class Pintle Chain is furnished with
carbon steel heat treated pins and carbon steel
case hardened bushings as standard. However,
stainless steel pins and bushings can be provided
when specied.
MOLINE
CHAIN
NO.
907
LINKS
Moline Promal
PINS
Carbon Steel,
Heat Treated
Stainless Steel
BUSHINGS
Carbon Steel,
Case Hardened
Stainless Steel
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
146
PITCH
IN
INCHES
LINKS
PER
10
FEET
WEIGHT
PER
FOOT
LBS.
AVERAGE ULTIMATE
STRENGTH LBS.
Moline
Promal
RECOMMENDED
MAXIMUM
WORKING LOAD LBS.
Moline
Promal
CHAIN AND
ATTACHMENT
CONSTRUCTION
3.170
38
12.2
32,500
5,000
Cottered Only
900 CLASS
PINTLE CHAIN
ATTACHMENTS
E51 ATTACHMENT
D
PITCH Ac
Bc
C
3.170 5.62 2.94 2.69
BOLT
DIA.
0.63
HOLE
DIA.
0.69
Dp
Db
E
E1
F
J
K
R
R1
T
0.62 1.44 1.12 2.31 1.66 0.72 1.69 1.31 0.69 0.36
AVERAGE
WEIGHT
PER FOOT
LBS.
12.2
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
147
DETACHABLE
CHAIN
side of the hook riding next to the sprocket
wheel. For drive applications, the direction of
travel is in the direction of the hook; for conveyor
and elevator applications, the direction of travel is
in the direction of the end bar.
Moline Detachable is manufactured in Moline
Promal. Tensile strengths of Promal links range
from 880 to 21,250 pounds.
Two link styles are also available: Style A has
a plain hook and fullls standard service requirements; Style B has a ribbed hook more suitable
for heavy-duty service. All Detachable links are
precision made to standard chain industry specications and are interchangeable with other
manufacturers chain links.
The pitch range of Molines Detachable Chain,
0.902 to 4.063 inches, satises a wide variety of
detachable applications. A complete range of attachment styles is offered. Brutaloy or cast steel
sprockets are available for every detachable pitch
size.
WEIGHT
PITCH LINKS PER 10
IN
PER
FEET
INCHES 10 FEET LBS.
0.902
133
2.4
1.154
104
3.5
1.375
88
5.5
1.630
74
5.2
1.155
104
7.7
1.136
105
7.6
1.506
80
8.0
1.631
74
7.0
AVERAGE
ULTIMATE
STRENGTH
LBS.
880
1,380
2,000
2,130
2,380
2,380
2,880
2,880
RECOMMENDED
MAXIMUM
WORKING
LOAD
LBS.
150
230
330
360
400
400
480
480
MOLINE
CHAIN
NO.
025
32
42
45
51
S51
52
55
HOOK
STYLE
A OR B
A
A
A
A
A
A
A
A
57
62
A
A
2.308
1.654
52
73
9.0
11.1
3,630
4,000
600
670
S62
67
75
77
78
88
103
124
A
B
A
B
B
B
B
B
1.654
2.308
2.609
2.297
2.609
2.609
3.075
4.063
73
52
46
52
46
46
39
030
16.0
11.2
11.3
11.4
11.9
22.4
40.0
66.6
3,880
4,250
5,130
4,500
6,880
8,000
12,500
21,250
650
710
860
750
1,150
1,330
2,090
3,540
AVAILABLE COUPLERS
WEIGHT
PER
AVAILABLE
PART
PAIR
ATTACHMENTS
NO.
LBS.
A1-R, A1-L
None
A1-R, A1-L, K1
None
A1-R, A1-L, K1
None
A1-R, A1-L, K1
None
K1
None
None
None
A1, D5, K1
52-Coupler
0.3
A1-R,A1-L,D5 9/16-R,D5 9/16-L, 55-Coupler
0.3
C1, F2,G27-R,G27-L,K1
A1-R,A1-L,F2
57-Coupler
0.5
A1-R,A1-L,A12-R,A12-L,D5-R,
62-Coupler
0.4
D5-L,K1
None
None
None
None
D5-R,D5-L
75-Coupler
0.7
A1-R,A1-L,D5,F2,K1
77-Coupler
0.7
K1
78-Coupler
1.1
F2,K1
88-Coupler
1.3
F2,F8
103-Coupler
2.7
F8
124-Coupler
5.8
www.alliedlocke.com
DETACHABLE
CHAIN
Style A
Style B
End Bar
End Bar
Sidebar
Ribbed Hook
Plain Hook
MOLINE
CHAIN
25
32
42
45
51
S51
52
55
57
62
S62
67
75
77
78
88
103
124
PITCH
0.902
1.154
1.375
1.630
1.155
1.136
1.506
1.631
2.308
1.654
1.654
2.308
2.609
2.297
2.609
2.609
3.075
4.063
Sidebar
MAXIMUM
ALLOWABLE
SPROCKET
FACE
A
0.38
0.50
0.62
0.69
0.56
0.56
0.62
0.69
0.75
0.81
0.81
0.69
0.94
0.69
0.94
0.94
1.12
1.25
0.20
0.17
0.25
0.22
0.28
0.22
0.30
0.27
0.36
0.27
0.30
0.27
0.34
0.27
0.36
0.27
0.41
0.31
0.41
0.31
0.41
0.31
0.53
0.41
0.41
0.44
0.39
0.61
0.36
0.42
0.66
0.44
0.48
0.78
0.44
0.58
1.00
0.61
0.77
1.31
0.68
OVER-ALL
WIDTH
L
0.78
0.97
1.28
1.31
1.25
1.06
1.53
1.41
1.81
1.66
1.53
2.03
2.09
2.22
2.62
2.75
3.28
4.06
BEARING
LENGTH
X
0.41
0.58
0.77
0.80
0.67
0.64
0.83
0.81
1.09
0.97
0.97
1.36
1.12
1.42
1.62
1.78
2.03
2.30
www.alliedlocke.com
149
DETACHABLE
CHAIN
ATTACHMENTS
A1 ATTACHMENT
T
0.09
0.09
0.12
0.12
0.12
0.12
0.16
0.16
0.12
0.12
0.16
0.16
0.19
0.19
0.19
0.19
0.22
0.22
AVERAGE
WEIGHT
PER 10
FOOT LBS.
3.9
3.9
5.0
5.0
7.0
7.0
7.5
7.5
11.0
11.0
9.0
9.0
13.0
13.0
15.0
15.0
18.0
18.0
T
0.22
0.22
AVERAGE
WEIGHT
PER 10
FOOT LBS.
18.0
18.0
D
PITCH
0.902
0.902
1.154
1.154
1.375
1.375
1.630
1.630
1.506
1.506
1.631
1.631
2.308
2.308
1.654
1.654
2.297
2.297
BOLT
DIAMETER
0.19
0.19
0.19
0.19
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
HOLE
DIAMETER
0.22
0.22
0.22
0.22
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
G
1.22
1.22
1.22
1.22
1.56
1.56
1.66
1.66
1.62
1.62
1.69
1.69
2.38
2.38
2.03
2.03
2.44
2.44
J
0.09
0.09
0.09
0.09
0.09
0.09
0.88
0.88
0.12
0.12
0.12
0.12
0.19
0.19
0.16
0.16
0.19
0.19
K
0.44
0.44
0.62
0.62
0.66
0.66
0.81
0.81
0.78
0.78
0.88
0.88
1.12
1.12
0.84
0.84
1.25
1.25
N
0.88
0.88
0.88
0.88
1.09
1.09
1.12
1.12
1.19
1.19
1.12
1.12
1.50
1.50
1.44
1.44
1.56
1.56
R
0.72
0.72
0.72
0.72
1.03
1.03
1.12
1.12
1.06
1.06
1.16
1.16
1.72
1.72
1.25
1.25
1.59
1.59
A12 ATTACHMENT
150
D
PITCH
1.654
1.654
BOLT
DIAMETER
0.25
0.25
HOLE
DIAMETER
0.28
0.28
G
2.56
2.56
J
0.16
0.16
K
0.84
0.84
M
0.56
0.56
N
1.38
1.38
R
1.25
1.25
www.alliedlocke.com
DETACHABLE
CHAIN
ATTACHMENTS
C1 ATTACHMENT
D
PITCH
1.631
BOLT
DIAMETER
0.25
HOLE
DIAMETER
0.28
H
0.59
H1
0.50
J
1.12
K
1.34
P
0.94
U
0.69
W
1.19
AVERAGE
WEIGHT
PER 10
FOOT-LBS.
12.2
D5 ATTACHMENT
PITCH
1.506
1.506
1.631
1.631
1.654
1.654
2.609
2.609
2.297
G
2.47
2.47
2.19
2.19
2.62
2.62
2.69
2.69
2.69
K
0.75
0.75
0.81
0.81
0.81
0.81
1.19
1.19
1.12
L
1.62
1.62
1.31
1.31
1.75
1.75
1.44
1.44
1.50
R
0.56
0.56
0.44
0.44
0.50
0.50
0.88
0.88
0.50
R1
0.94
0.94
0.94
0.94
1.00
1.00
1.75
1.75
1.19
AVERAGE
WEIGHT
PER 10
FOOT-LBS.
21.0
21.0
14.0
14.0
20.0
20.0
25.0
25.0
22.0
F2 ATTACHMENT
D
PITCH
1.631
2.297
2.609
3.075
BOLT
DIAMETER
0.19
0.31
0.31
0.38
HOLE
DIAMETER
0.22
0.34
0.34
0.41
J
1.31
1.94
2.00
2.47
K
0.69
1.19
1.25
1.31
M
1.06
1.75
2.00
2.12
P
1.03
1.50
1.50
1.91
T
0.16
0.25
0.25
0.28
U
0.91
1.38
1.38
1.81
W
1.56
2.53
2.72
3.00
AVERAGE
WEIGHT
PER 10
FOOT-LBS.
13.0
31.0
42.0
63.0
www.alliedlocke.com
151
DETACHABLE
CHAIN
ATTACHMENTS
W
3.00
3.94
AVERAGE
WEIGHT
PER 10
FOOT-LBS.
68.3
116.4
T
0.16
0.16
AVERAGE
WEIGHT
PER 10
FOOT-LBS.
12.0
12.0
D
PITCH
3.075
4.063
BOLT
DIAMETER
0.38
0.50
HOLE
DIAMETER
0.41
0.56
J
2.62
2.88
K
2.34
2.44
M
2.12
2.50
P
2.06
2.22
T
0.44
0.53
U
2.00
2.09
G27
ATTACHMENT
D
PITCH
1.631
1.631
BOLT
DIAMETER
0.25
0.25
HOLE
DIAMETER
0.28
0.28
G
2.00
2.00
J
0.94
0.94
K
1.00
1.00
N
1.31
1.31
N1
0.38
0.38
P
1.06
1.06
K1 ATTACHMENT
152
D
PITCH
1.154
1.375
1.630
1.155
1.506
1.631
1.654
2.297
2.609
2.609
BOLT
DIAMETER
0.19
0.19
0.19
0.19
0.19
0.19
0.25
0.25
0.25
0.31
HOLE
DIAMETER
0.22
0.22
0.22
0.22
0.22
0.22
0.28
0.28
0.28
0.34
J
0.38
0.38
0.41
0.44
0.44
0.41
0.47
0.66
0.62
0.75
K
0.59
0.69
0.78
0.62
0.72
0.78
0.84
1.12
1.25
1.25
M
1.75
2.00
2.00
1.75
2.38
2.00
2.38
3.00
3.38
3.81
R
0.59
0.75
0.84
0.62
0.88
0.88
0.94
1.28
1.38
1.38
T
0.09
0.12
0.12
0.12
0.12
0.12
0.16
0.16
0.16
0.19
W
2.31
2.69
2.69
2.06
2.81
2.62
3.31
3.88
3.84
4.25
AVERAGE
WEIGHT
PER FOOT
LBS.
7.9
12.2
8.9
11.4
13.0
11.0
19.0
31.0
25.0
33.0
MC 33 DOUBLE
FLEX CHAIN
Molines MC-33 Chain is a detachable-type
chain with a rugged, double ex design for both
horizontal turning and conventional articulation.
It retains its pulling power around the curves
with center line radii as small as 18 inches. Its
wide-web top design provides more than ample
carrying surface. Available in Moline File-Hard
Promal, MC-33 Chain is interchangeable with
similar 2.500 inch chain of other manufacturers.
MC-33 Chains exibility provides a wide variety of applications in dairy, bottling, and related
industries. It operates in the direction of its
links open ends on Brutaloy sprockets.
Flexible Joints
Removable Pin
MOLINE
CHAIN
NO.
MC-33
LINKS
Moline File-Hard Promal
PINS
Moline File-Hard Promal
MOLINE
CHAIN
NO.
MC-33
MOLINE
CHAIN
NO.
MC-33
PITCH
IN INCHES
2.500
PITCH
2.500
WEIGHT PER
FOOT
LBS.
3.3
LINKS PER
10 FEET
48
OVER-ALL
WIDTH
A
1.56
DIAMETER
OF BARREL
Db
1.25
AVERAGE
ULTIMATE
STRENGTH
LBS.
12,000
RECOMMENDED
MAXIMUM
WORKING
LOAD
LBS.
900
BEARING
LENGTH
E1
0.69
CHAIN
CONSTRUCTION
Special Pin
HEIGHT
OF
SIDEBAR
F
1.25
THICKNESS
OF
SIDEBAR
T
0.31
Local:
Phone: 815-288-1471
Fax: 815-288-7945
www.alliedlocke.com
153