You are on page 1of 1

Activation RT6 2016-1 Europe maps

1. First try to install new RT6 2016-1 maps without activation code :
a. Just FORMAT your at least 4GB or 8GB USB key in FAT32 format and then just
copy all files from map RT6 2016-1 to just formated USB key:

b. Then just insert this USB key in RT6 unit, engine must running and go to
Navigation Map management Mapping and Updating - Update map. If
your navigation system dont required any activation code this mean, that you
dont need activation code for this new maps (just update your region/country
you want look file Region.txt)!

2. If your navigation system required activation code, then follow this


steps :
a. First you must copy all files from folder RT6 Calculator on the empty USB key
and then you must add the two files "CCT.DAT.INF" and "CCT.DAT" from the
folder RT6 2016-1 maps

b. Then insert this USB key in RT6 unit, engine must running and answer "yes" to
the question and you will get your activation key that scrolls across the screen in a
few seconds (this is your activation key for your RT6 for 2016-1 maps)!

c. You can now write this key on paper or in your mind


d. Your activation code is also automatically saved on your USB key into a new file
named License (save) leave this file on your USB key.

e. You can now remove the USB key from car, erase all files from USB key except
the License file, and copy all files from map RT6 2016-1 maps on this USB key
(with License file included).

f. Then simply put this USB key in RT6 unit and wait for the detection OR go to
Navigation Map management Mapping and Updating - Update map and
select region/country you want (it will need around 20 to 25 minutes per
region/country engine must running, you can drive and do the updates, but
NEVER dont turn OFF the engine/car while updating is not completed!!!).

3. Use java generator (here you will need VIN code from your car and file CCT.DAT.INF
from this new 2016-1 maps).

You might also like