You are on page 1of 1

IADC 627

PRODUCT SPECIFICATIONS

SIZE
12 1/4 in
311 mm
TYPE
45QX2

Drilling
Applications

Designed to drill hard and abrasive cherty magnetite and banded iron formations.
Compressive strengths of up to 70,000 psi (482.7 mpa).

Design
Specications

Bearing Type
Inner / Gage Rows
Inner / Gage Inserts
Bit Connection Type

Spinodal Sealed Bearing


8/ 3
81 / 51
6 5/8 Reg

Operating
Parameters

Weight on Bit
Lbs.
Tonnes
Rotary Speed (RPM)

24,500 to 85,500
11.1 to 39
50 to 200

Features

Benets

W Feature

Aproprietary process which adds wear resistant material to cones. This feature reduces cone material wear
which can lead to lost cutting structure and premature failure.

QX Gage Insert

New crest geometry and TCI grades produce ROP that are sustainable throughout the run in abrasive drilling conditions by putting more carbide on the hole wall.

Trucut Gage

Patented gage system using SRT (semi round top) inserts on gage, alternating with either QX sculptured
or QX off gage inserts, maximizes gage wear resistance, but minimizes fatigue and heat checking induced
breakage, equating to longer life and a higher Rate of Penetration.

Sandvik Rotary Tools


Sandvik Mining and Construction
www.smc.sandvik.com

You might also like