You are on page 1of 10

DNV SERVICE DOCUMENTS

Summary of Changes and Current Document Status


NOVEMBER 2011

DET NORSKE VERITAS AS

FOREWORD
DET NORSKE VERITAS (DNV) is an autonomous and independent foundation with the objectives of safeguarding life, property and the environment, at sea and onshore. DNV undertakes classification, certification, and other verification and consultancy services relating to quality of ships, offshore units and installations, and onshore industries worldwide, and carries out research in relation to these functions. DNV service documents consist of amongst other the following types of documents: Service Specifications. Procedual requirements. Standards. Technical requirements. Recommended Practices. Guidance. The Standards and Recommended Practices are offered within the following areas: A) Qualification, Quality and Safety Methodology B) Materials Technology C) Structures D) Systems E) Special Facilities F) Pipelines and Risers G) Asset Operation H) Marine Operations J) Cleaner Energy O) Subsea Systems

Det Norske Veritas AS November 2011 Any comments may be sent by e-mail to rules@dnv.com For subscription orders or information about subscription terms, please use distribution@dnv.com Computer Typesetting (Adobe Frame Maker) by Det Norske Veritas

This service document has been prepared based on available knowledge, technology and/or information at the time of issuance of this document, and is believed to reflect the best of contemporary technology. The use of this document by others than DNV is at the user's sole risk. DNV does not accept any liability or responsibility for loss or damages resulting from any use of this document.

Summary of Changes and Current Document Status, November 2011 Contents Page 3

CONTENTS
Sec. 1 Sec. 2 Sec. 3 General ................................................................................................................................................ 4 Current Service Specifications, Standards and Recommended Practices .................................... 5 Summary of Changes ......................................................................................................................... 8

A. Changes to DNV Service Specifications ........................................................................................................................ 8 B. Changes to DNV Standards ............................................................................................................................................ 9 C. Changes to Recommended Practices .............................................................................................................................. 9

DET NORSKE VERITAS AS

Summary of Changes and Current Document Status, November 2011 Page 4 Sec.1

SECTION 1 GENERAL
As of October 2010 all DNV service documents are primarily published electronically and they are made available for free as pdf files through http://www.dnv.com. The electronic pdf versions of the documents found through the same site are the officially binding versions. Readers of documents are encouraged to regularly check for updates in order to ensure that they hold the current updated versions. Updating Scheme These documents are published throughout the year except DNV Offshore Service Specifications and Offshore Standards which are normally published twice yearly, in April and in October, due to updates. If a document has been updated, the document will normally be given a new edition date. The corresponding Adobe PDF file will be made available through http://www.dnv.com and the date of the column A of Table 1 in Sec.2 will be updated. If there is a need for amendments to the document; i.e. editorial and clarification corrections only, the electronic file will be updated, but the edition date will be retained. However, a new Adobe PDF file will be generated and made available through http://www.dnv.com. The date of the PDF file will appear in column B of Table 1 in Sec.2. The updates including amendments to each chapter will be described briefly on page 3 of that document.

DET NORSKE VERITAS AS

Summary of Changes and Current Document Status, November 2011 Sec.2 Page 5

SECTION 2 CURRENT SERVICE SPECIFICATIONS, STANDARDS AND RECOMMENDED PRACTICES


Table 1 Current Documents
A Current Edition Documents B Amendments; i.e. editorial corrections and clarifications only October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 October 2011 November 2010

Service Specifications DNV-DSS-314 Verification of Hydrocarbon Refining and Petrochemical Facilities DNV-DSS-315 Verification of Onshore LNG and Gas Facilities Offshore Service Specifications DNV-OSS-101 Rules for Classification of Offshore Drilling and Support Units DNV-OSS-102 Rules for Classification of Floating Production, Storage and Loading Units DNV-OSS-103 Rules for Classification of LNG/LPG Floating Production and Storage Units or Installations DNV-OSS-121 Classification based on Performance Criteria Determined from Risk Assessment Methodology DNV-OSS-201 Verification for Compliance with Norwegian Shelf Legislation DNV-OSS-202 Verification for Compliance with UK Shelf Regulations DNV-OSS-300 Risk Based Verification DNV-OSS-301 Certification and Verification of Pipelines DNV-OSS-302 Offshore Riser Systems DNV-OSS-304 Risk Based Verification of Offshore Structures DNV-OSS-305 Rules for Certification and Verification of Diving Systems DNV-OSS-306 Verification of Subsea Facilities DNV-OSS-307 Verification of Process Facilities DNV-OSS-308 Verification of Lifting Appliances for the Oil and Gas Industry DNV-OSS-312 Certification of Tidal and Wave Energy Converters DNV-OSS-313 Pipe Mill and Coating Yard - Qualification DNV-OSS-401 Technology Qualification Management Standards DNV-DS-J102 Design and Manufacture of Wind Turbine Blades, Offshore and Onshore Wind Turbines Safety Principles and Arrangement Metallic Materials Design of Offshore Steel Structures, General (LRFD method) Structural Design of Offshore Ships Structural Design of Column Stabilised Units (LRFD method) Structural Design of Self-elevating Units (LRFD method) Structural Design of TLPs (LRFD method) Structural Design of Deep Draught Floating Units/Spars (LRFD and WSD Method) Structural Design of Offshore Units (WSD method) Stability and Watertight Integrity Fabrication and Testing of Offshore Structures Composite Components Offshore Concrete Structures Concrete LNG Terminal Structures and Containment Systems Marine and Machinery Systems and Equipment October 2010 October 2011 October 2011 June 2011 October 2008 April 2010 April 2011 April 2004 October 2000 October 2010 October 2006 October 2010 June 2004 June 2004 October 2010 October 2008 April 2009 October 2010 October 2010 October 2010

Offshore Standards DNV-OS-A101 DNV-OS-B101 DNV-OS-C101 DNV-OS-C102 DNV-OS-C103 DNV-OS-C104 DNV-OS-C105 DNV-OS-C106 DNV-OS-C201 DNV-OS-C301 DNV-OS-C401 DNV-OS-C501 DNV-OS-C502 DNV-OS-C503 DNV-OS-D101 April 2011 April 2009 April 2011 October 2011 October 2008 October 2008 April 2011 October 2008 April 2011 April 2011 October 2010 October 2010 October 2010 October 2010 October 2011 October 2009 April 2009 October 2009

DET NORSKE VERITAS AS

Summary of Changes and Current Document Status, November 2011 Page 6 Sec.2

Table 1 Current Documents (Continued)


Documents B Amendments; i.e. editorial corrections and clarifications only April 2011 October 2008 May 2011 June 2011 October 2008 October 2009 October 2009 October 2010 October 2010 October 2008 October 2009 October 2010 April 2009 October 2009 April 2011 October 2010 October 2008 April 2010 October 2010 October 2010 October 2011 September 2011 October 2011 October 2009 April 2011 April 2011 A Current Edition

DNV-OS-D201 DNV-OS-D202 DNV-OS-D203 DNV-OS-D301 DNV-OS-E101 DNV-OS-E201 DNV-OS-E301 DNV-OS-E302 DNV-OS-E303 DNV-OS-E304 DNV-OS-E401 DNV-OS-E402 DNV-OS-E403 DNV-OS-E406 DNV-OS-F101 DNV-OS-F201 DNV-OS-H101 DNV-OS-J101 DNV-OS-J201 DNV-OS-J301

Electrical Installations Automation, Safety, and Telecommunication Systems Integrated Software-Dependent System (ISDS) Fire Protection Drilling Plant Oil and Gas Processing Systems Position Mooring Offshore Mooring Chain Offshore Mooring Fibre Ropes Offshore Mooring Steel Wire Ropes Helicopter Decks Offshore Standard for Diving Systems Offshore Loading Buoys Design of Free Fall Lifeboats Submarine Pipeline Systems Dynamic Risers Marine Operations, General Design of Offshore Wind Turbine Structures Offshore Substations for Wind Farms Standard for Classification of Wind Turbine Installation Units

Recommended Practices DNV-RP-A201 Plan Approval Documentation Types Definitions October 2011 DNV-RP-A203 Qualification of New Technology July 2011 DNV-RP-A204 Quality Survey Plan (QSP) for Offshore Class New-building September 2011 Surveys DNV-RP-B101 Corrosion Protection of Floating Production and Storage Units April 2007 DNV-RP-B401 Cathodic Protection Design October 2010 DNV-RP-C101 Allowable Thickness Diminution for Hull Structure of Offshore April 2007 Ships DNV-RP-C102 Structural Design of Offshore Ships February 2002 DNV-RP-C103 Column Stabilised Units October 2010 DNV-RP-C104 Self-elevating Units April 2011 DNV-RP-C201 Buckling Strength of Plated Structures October 2010 DNV-RP-C202 Buckling Strength of Shells October 2010 DNV-RP-C203 Fatigue Design of Offshore Steel Structures October 2011 DNV-RP-C204 Design against Accidental Loads October 2010 DNV-RP-C205 Environmental Conditions and Environmental Loads October 2010 DNV-RP-C206 Fatigue Methodology of Offshore Ships October 2010 DNV-RP-C207 Statistical Representation of Soil Data October 2010 DNV-RP-D101 Structural Analysis of Piping Systems October 2008 DNV-RP-D201 Integrated Software Dependent Systems October 2009 DNV-RP-E101 Recertification of Well Control Equipment October 2008 DNV-RP-E102 Recertification of Blowout Preventers and Well Control June 2010 Equipment for the US Outer Continental Shelf DNV-RP-E301 Design and Installation of Fluke Anchors in Clay May 2000 DNV-RP-E302 Design And Installation of Plate Anchors in Clay December 2002 DNV-RP-E303 Geotechnical Design and Installation of Suction Anchors in Clay October 2005 DNV-RP-E304 Damage Assessment of Fibre Ropes for Offshore Mooring April 2005 DNV-RP-E307 Dynamic Positioning Systems - Operation Guidance January 2011 DNV-RP-E401 Survey of Diving Systems April 2007

DET NORSKE VERITAS AS

Summary of Changes and Current Document Status, November 2011 Sec.2 Page 7

Table 1 Current Documents (Continued)


A Current Edition Documents B Amendments; i.e. editorial corrections and clarifications only

DNV-RP-E402 DNV-RP-E403 DNV-RP-F101 DNV-RP-F102 DNV-RP-F103 DNV-RP-F105 DNV-RP-F106 DNV-RP-F107 DNV-RP-F108 DNV-RP-F109 DNV-RP-F110 DNV-RP-F111 DNV-RP-F112 DNV-RP-F113 DNV-RP-F116 DNV-RP-F118 DNV-RP-F201 DNV-RP-F202 DNV-RP-F203 DNV-RP-F204 DNV-RP-F205 DNV-RP-F206 DNV-RP-F301 DNV-RP-F302 DNV-RP-G101 DNV-RP-G103 DNV-RP-H101 DNV-RP-H102 DNV-RP-H103 DNV-RP-H104 DNV-RP-J101 DNV-RP-J201 DNV-RP-J202 DNV-RP-O401 DNV-RP-O501

Naval Rescue Submersibles October 2010 Hyperbaric Evacuation Systems October 2010 Corroded Pipelines October 2010 Pipeline Field Joint Coating and Field Repair of Linepipe Coating May 2011 Cathodic Protection of Submarine Pipelines by Galvanic Anodes October 2010 Free Spanning Pipelines February 2006 Factory Applied External Pipeline Coatings for Corrosion Control May 2011 Risk Assessment of Pipeline Protection October 2010 Fracture Control for Pipeline Installation Methods Introducing January 2006 Cyclic Plastic Strain On-Bottom Stability Design of Submarine Pipelines October 2010 November 2011 Global Buckling of Submarine Pipelines October 2007 Structural Design due to High Temperature/High Pressure Interference Between Trawl Gear and Pipelines October 2010 Design of Duplex Stainless Steel Subsea Equipment Exposed to October 2008 Cathodic Protection Pipeline Subsea Repair October 2007 Integrity Management of Submarine Pipeline Systems October 2009 Pipe Girth Weld Aut System Qualification and Project Specific October 2010 Procedure Validation Design of Titanium Risers October 2002 Composite Risers October 2010 Riser Interference April 2009 Riser Fatigue October 2010 Global Performance Analysis of Deepwater Floating Structures October 2010 Riser Integrity Management April 2008 Subsea Separator Structural Design April 2007 Selection and Use of Subsea Leak Detection Systems April 2010 Risk Based Inspection of Offshore Topsides Static Mechanical October 2010 Equipment Non-intrusive Inspection January 2011 Risk Management in Marine and Subsea Operations January 2003 Marine operations during Removal of Offshore Installations April 2004 Modelling and Analysis of Marine Operations April 2011 Ballast, Stability, and Watertight Integrity - Planning and September 2011 Operating Guidance Use of Remote Sensing for Wind Energy Assessments April 2011 November 2011 Qualification Procedures for CO2 Capture Technology April 2010 April 2010 Design and Operation of CO2 Pipelines Safety and Reliability of Subsea Systems April 1985 Erosive Wear in Piping Systems 2005 November 2007

DET NORSKE VERITAS AS

Summary of Changes and Current Document Status, November 2011 Page 8 Sec.3

SECTION 3 SUMMARY OF CHANGES


A. Changes to DNV Service Specifications
DNV Offshore Service Specifications Main changes
Document number DNV-OSS-101 October 2011 Document title Rules for Classification of Offshore Drilling and Support Units Main changes A restricted use legal clause has been added on the front page. The description of documentation requirements has been updated/simplified. Class scope for temporary equipment has been clarified in Ch.1 Sec.5 A100. New class notation DRILL(US) has been added in Ch.2 Sec.6 D. Class notation DSV-BOUNCE has been deleted. Requirements for ageing self-elevating units have been updated and clarified in Ch.3 Sec.2 D. The description of survey requirements in Ch.3 Sec.6 D related to class notation DRILL has been updated in order to improve transparency and guidance. The description of Offshore CM alternative survey arrangement (Condition Monitoring) has been updated in Ch.3 Sec.7 H. Rules for Classification of A restricted use legal clause has been added on the front page. Floating Production, Storage The description of documentation requirements has been and Loading Units updated/simplified. The societies role and relation to other parties' role and obligations has been further clarified in Ch.1 Sec.2 A1001 and Sec.4 A502. The societies basis and procedures to assess compliance with the rules has been further clarified. As part of this the Quality Survey Plan - QSP has been introduced; Ch.1 Sec.4 A205, A600, A700 and Ch.3 App.B B502. Class scope for temporary equipment has been clarified in Ch.1 Sec.5 A100. Requirements for ageing self-elevating units have been updated and clarified in Ch.3 Sec.2 D. The description of Offshore CM alternative survey arrangement (Condition Monitoring) has been updated in Ch.3 Sec.7 H.

DNV-OSS-102 October 2011

DET NORSKE VERITAS AS

Summary of Changes and Current Document Status, November 2011 Sec.3 Page 9

B. Changes to DNV Standards


DNV Standards Main changes
Document number DNV-OS-C102 October 2011 Document title Structural Design of Offshore Ships Main changes Sec.2 Material Selection and Inspection Principles Table B1 has been amended substructure for derrick categorized as special in DNV-OS-C101. Sec.3 Design Principles A new item B603 regarding short term analysis has been added and subsequent items have been renumbered. The terminology "Survival condition" is introduced in accordance with DNV OS-C101. Operation condition is clarified and tables are updated. Sec.6 Strength of Topside Structures A new column Global design has been added in Table B1 - Local static loads. Derric/not Derric removed from Table I1 Usage factor coefficients. Sec.9 Accidental Conditions A new sub-section element B800, Loss of heading control, has been added. Sec.11 Additional Provisions for Well Service and Drilling Units DNV-OS-C107 DNV-OS-D101 October 2011 Structural Design of Ship-shaped Drilling and Well Service Units Marine and Machinery Systems and Equipment Reference to requirements for corrosion protection changed. This Offshore Standard has been withdrawn and replaced by DNV-OS-C102 Alignment with MODU Code 2009 wrt inclination angles, Ch.2 Sec.1 B. Clarified conditions which apply for inert and vent system reference to Ship Rules Pt.5 Ch.3. Standardised certification classes in Ch.3 Table A1 with other Offshore Standards. Corrected certification requirements in Table C5 in Ch.3 and added new Table C6. Corrected Table A1 in Ch.3 Sec.1 with number and name of new OSS. Corrected printing errors and faulty references. This Offshore Standard is new

DNV-OS-H101 October 2011

Marine Operations, General

DET NORSKE VERITAS AS

Summary of Changes and Current Document Status, November 2011 Page 10 Sec.3

C. Changes to Recommended Practices


DNV Recommended Practices Main changes
Document number DNV-RP-A201 October 2011 Document title Main changes Plan Approval Sec.2 Documentation Types Documentation Types A new documentation type H220 Container safe access plan has Definitions been added. Added reference to coating system requirements from IMO in M042. Deleted documentation type Z020. New title and text in Z030 which now includes all types of arrangement plans (local and system). References to Z020 are substituted by Z030. Fatigue Design of Offshore Steel Structures In this revision minor corrections of printing errors have been made. An update of Section 10 References has been made. In addition the following changes are made: Addition of a new Section 2.3.6 on fillet welds at doubling plates. Addition of text and figures in section 3.3.7 on stress concentration factors for tubular butt welds. Equations for stress concentration factors for tubular butt welds with machined sections are included. Derivation of hot spot stress in tubular joints is included in Section 4.2. Some more information of effect of hammer peening is included in Section 7.5. In addition a new Section D.15 on alternative S-N curves for improved welds by grinding and peening is added in Appendix D Commentary.

DNV-RP-C203 October 2011

DET NORSKE VERITAS AS

You might also like