Professional Documents
Culture Documents
Ka-52
[p.16]
production grows up
T-50: what we learnt of it at MAKS 2011 [p.24, 30, 32]
November 2011
Editor-in-Chief
Andrey Fomin
Deputy Editor-in-Chief
Vladimir Shcherbakov
Editor
Yevgeny Yerokhin
Columnists
Alexander Velovich Artyom Korenyako George Smirnov
Special correspondents
Alexey Mikheyev, Victor Drushlyakov, Andrey Zinchuk, Valery Ageyev, Natalya Pechorina, Marina Lystseva, Dmitry Pichugin, Sergey Krivchikov, Sergey Popsuyevich, Piotr Butowski, Alexander Mladenov, Miroslav Gyurosi
Dear reader, You are holding the latest issue of Take-off magazine, special Englishlanguage supplement to VZLET Russias national aerospace magazine, dedicated this time to the Dubai Airshow that has been among the major respectable international aerospace exhibitions. Russian participants interest in it grows up as the Middle East and North Africa region becomes one of the leaders in Russian-made aircraft procurement and establishing international aerospace cooperation. Earlier this year two brand-new Ilyushin Il-76MF transport planes were delivered to Jordan while Irkut corporation goes on with Sukhoi Su-30MKI(A) deliveries to Algeria and is to start handing over Yakovlev Yak-130 combat trainers to this country. Russian-made transport and combat helicopters traditionally have a high popularity in the region. Today Russian Helicopters holding company consolidating major Russias rotor-wing aircraft developers and manufacturers offers its new products both military and commercial ones. In this issue you can find information about some recent Russian Helicopters programmes, including new-generation Mil Mi-38 medium transport machine, Mi-34C1 multipurpose light helicopter as well as Kamov Ka-52 and Mil Mi-28N combat helicopters which deliveries to Russian Air Force are growing fast. Just about two months before this Dubai Airshow, the town of Zhukovsky in the Moscow Region saw the completion of the 10th International Aviation and Space Salon MAKS 2011 the aviationrelated event of the year in Russia. According to numerous MAKS 2011 exhibitors and visitors, the show became far more impressive, with the number of exhibitors growing noticeably, number of foreign delegations increasing and infrastructure of the show improving. The status of MAKS as a business event and a place to conduct scientific fora and conferences has been bolstered. Sukhoi T-50 being the Russias PAK FA fifth generation fighter prototype became the main star of the show. Thats why here in this issue we tell our readers what we learnt of the new fighter, its avionics and weapons at MAKS 2011. As usually we also focus our attention on the main events in Russian aerospace industry of recent months, with preference given to those of them that could be of special interest to the current and potential users of Russian aircraft in the Middle East and North Africa. I wish you fruitful work at the Dubai Airshow, useful contacts and lucrative contracts! Sincerely, Andrey Fomin, Editor-in-Chief, Take-off magazine
Translation
Yevgeny Ozhogin
Cover picture
Alexey Mikheyev
Publisher
Director General
Andrey Fomin
Marketing Director
George Smirnov
News items for In Brief columns are prepared by editorial staff based on reports of our special correspondents, press releases of production companies as well as by using information distributed by ITAR-TASS, ARMS-TASS, Interfax-AVN, RIA Novosti, RBC news agencies and published at www.aviaport.ru, www.avia.ru, www.gazeta.ru, www.cosmoworld.ru web sites Items in the magazine placed on this colour background or supplied with a note Commercial are published on a commercial basis. Editorial staff does not bear responsibility for the contents of such items. The magazine is registered by the Federal Service for supervision of observation of legislation in the sphere of mass media and protection of cultural heritage of the Russian Federation. Registration certificate PI FS77-19017 dated 29 November 2004
Aeromedia, 2011
P.O. Box 7, Moscow, 125475, Russia Tel. +7 (495) 644-17-33, 798-81-19 Fax +7 (495) 644-17-33 E-mail: info@take-off.ru http://www.take-off.ru
contents
INDUSTRY
Two Tu-204SMs already in trials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 MC-21 development on schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
November 2011
Ilyushin 476 first flying prototype nearing completion . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Another Be-200 delivered to Russian Emergencies Ministry. . . . . . . . . . . . . . . . . . . . . . 8 Who will bank on the Little Trotter? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Mi-34C1 has taken to the sky!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 MiG unveils 3D simulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MIL helicopters: From light to versatile ones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 "Alligators" homeland Report from Arsenyev. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12 16
MILITARY AVIATION
T-50: What we learnt of it at MAKS 2011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Yuri Bely: PAK FAs AESA radar development is right on schedule . . . . . . . . . . . . . . 30 Forging arms for T-50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
24
RusAF Training Centre got 10 Yak-130s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Russian-made An-140s earmarked for military use? . . . . . . . . . . . . . . . . . . . . . . . . . . 36
30
Tu-214ON: Open Skies without secrets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 RusAF to receive supermanoeuvrable fighters of Su-30MKI family. . . . . . . . . . . . . . . . 37 Six more Mi-28Ns delivered to RusAF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Rostvertol resumes Mi-26 deliveries to Russian Defence Ministry . . . . . . . . . . . . . . . . 38
COMMERCIAL AVIATION
32
Polyot and UIA launch An-148 services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Another Il-114-100 kicks off commercial operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
42
2
take-off november 2011
Construction of new MiG-29K batch kicks off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Russian helicopters for Mistral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
www.take-off.ru
industry | news
64150) in April. As is known, it first flew in Ulyanovsk on 29 December 2010 and was ferried to Tupolevs Zhukovsky Flight Test and Development Facility at Gromov LIIs airfield. Aviastar is manufacturing the third Tu-204SM (No. 64152) now. The certification tests are to be wrapped up in 2012, when deliveries of the first production aircraft may be launched. The Tu-204SM differs from the production Tu-204 and Tu-214 in improved flight and operating characteristics, with the operating experience of its predecessors taken into account during its devel-
opment. The Tu-204SMs features include the advanced PS-90A2 engines from Aviadvigatel JSC in Perm, developed in cooperation with Pratt&Whitney and productionised by the Perm Engine Company, and an advanced avionics suite that has allowed a crew reduction down to two members. Close attention is paid during the Tu-204SMs development to the introduction of an after-sales maintenance system meeting international standards. The aircraft with the 108-tonne maximum takeoff weight takes 215 passengers in the single-class lay-
out out to 4,800 km or 166 in the two-class layout to a distance of 6,100 km. The design life of the Tu-204SM is 60,000 flying hours, 45,000 flights or 25 years in service. At present, UAC and Tupolev are in talks with potential launch customers for the Tu-204SM, particularly, VIM-Avia and some other Russian carriers. In addition, Tupolev late in September reported the signature of the memorandum of understanding with Syrian carrier Syrianair on delivery of three Tu-204SMs starting from 2013 and then setting up a maintenance centre for aircraft of the type on the premises of Syrianair.
www.take-off.ru
Alexey Mikheyev
Aircraft family with expanded operational capabilities and a new level of economic efciency
1215% operational cost reduction in comparison with existing analogues. Innovative design solutions for airframe. Optimal fuselage cross-section to increase the comfort level or to reduce the turnaround time. Cooperation with the world leading suppliers of systems and equipment. Matching future environmental requirements. Expanded operational capabilities.
www.irkut.com
industry | news
2011 in August. The mockup displayed is a stand for testing and debugging avionics and airborne equipment and for training test pilots in flying the upgraded plane. Assembly of the fuselage sections of the first two Il-76TD-90As began in Aviastars assembly shop in 2009. A year later, manufacture of new-design wing panels commenced there. To speed up the construction, some of the airframes assemblies for the first two planes (empennage and wingtips) have been ordered from TAPC in Tashkent. The prototype of the upgraded Il-76 is expected to fly for the first time in Ulyanovsk early in 2012. Aviastar plans to launch production of the upgraded aircraft once the prototypes have completed their test programme. Manufacture of parts
for the first three production planes started as far back as July of last year. The plant is going to make three production aircraft a year at first, with the subsequent output rate to grow up to seven planes per annum. Not only the Il-76MD-90A airlifter and Il-76TD-90A commercial transport versions are planned to be made in Ulyanovsk under the Ilyushin 476 programme, but a number of special variants as well. For instance, Ilyushin 476 is to be used as the platform for a new tanker plane intended to replace the Il-78 and Il-78M built in Tashkent previously. A model of the future AEW&C aircraft based on the Ilyushin 476 airframe was shown during the International Air Transport Forum in Ulyanovsk in April this year, with the aircraft featuring a redesigned wing, PS-90A-76 engines and other design features of future Aviastar-made Il-76s. The plane has all of the accoutrements of the A-50 AEW&C aircraft and its latest versions and upgrades, e.g. a radar
in the spine-mounted rotodome, other extra antenna systems and equipment, cooling air intakes set in various parts of the airframe, metal fuselage nose section instead of the characteristic Il-76 airlifters navigators glass bubble, in-flight refuelling system, etc. That the advanced AEW&C system will be based on the Ulyanovskupgraded Il-76 was told to the media in August by Russian Air Force chief Col.-Gen. Alexandr Zelin: There is full backing by the chief of the General staff, there is financial support. The aircraft is to be developed by 2016, and the platform itself is to be ready about 201314. The Russian Defence Ministry is expected to be the launch customer for the Ulyanovsk-made Ilyushin 476, after which domestic and foreign commercial operators may apply too. Aviastar Director General Sergei Dementyev estimates the overall volume of the 476 programme throughout 2020 at about a hundred aircraft.
Take-off's archive
www.take-off.ru
Yuri Ponomarev
Take-off's archive
industry | news
Beriev
4 October 2011 saw a new Beriev Be-200ChS amphibian named Pyotr Streletsky (registered as RF-31121, c/n 301) take off from the TaganrogYuzhny airfield for its maiden flight. The aircraft is built for the Russian Emergencies Ministry. The crew of
Beriev test pilots Yevgeny Yurasov (commander) and Nikolai Kuleshov (co-pilot) flew the amphibian. According to the pilot, all systems operated normally on a three-hour flight, with the crew pronouncing the stability and controllability of
the version higher than those of the earlier ones were. Due to the shifting of Be-200 amphibian production from the Irkutsk Aircraft Plant (an affiliate of the Irkut corporation) to Taganrog, the Irkutsk-built
Aviation School of Civil Aviation in the first place. However, that the order will be placed is no longer for sure, because the Federal Air Transport Agency complains of the development slipping behind schedule and of the economic terms of the possible deal and subsequent operation. It is an open secret that the flying school in Ulyanovsk has had Austrian-made Diamond DA42 twin-diesel planes bought, with the Diamond DA42s fuel consumption being even less than that of the main flying desk of Russian airline pilots the Yak-18T single-pistonengine primary trainer.
In addition to its primary purpose, the Rysachok powered by two M-601F turboprops rated at 750 hp each can carry 10 passengers or 1,570 kg of cargo on commuter lines, or 15 parachutists, or six casualties on stretchers, accompanied by a medic. It also can conduct patrol, search and rescue (SAR) and air surveillance operations, etc. It will be clear pretty soon whether the plane will be needed in any of these capacities or the programme, which is rather attractive, albeit loosing the support of the Ministry of Transport, will have to be discontinued.
www.take-off.ru
Alexey Mikheyev
Mi-34C1
more at www.rus-helicopters.ru
E X P E R I E N C E & I N N O VAT I O N
29 bld. 141, Vereyskaya st., Moscow,121357, Russian Federation Tel: +7 (495) 627-5545 +7 (495) 981-6395 E-mail: info@rus-helicopters.com
industry | news
10
www.take-off.ru
Alexey Mikheyev
United Engine Corporation Bldg. 141, 29 Vereyskaya str., Moscow, 121357, Russia Tel./fax: +7 (495) 232-91-63 www.uk-odk.ru
industry | interview
Alexey Mikheyev
MIL HELICOPTERS
FROM LIGHT TO VERSATILE ONES
Russian international air show MAKS 2011 became a venue of numerous helicopter debuts, e.g. the Russian Helicopters holding company unveiled several helicopter types in the form of full-scale examples, with experts noting the Mil Mi-38 medium helicopters version powered by Russian engines TV7-117V and the upgraded Mi-34C1 light helicopter from the Mil Moscow Helicopter Plant. Take-offs Deputy Editor-in-Chief Vladimir Shcherbakov asked Mil Designer General Alexei Samusenko for comment on these and other programmes. A top priority among Russian helicopter development programmes is that of the Mi-38 multirole helicopter. We saw its new version, the Mi-382, at MAKS 2011. What has been done under the programme and when will the market be able to get its production-standard variant? The Mi-38 development programme is important not only to our company, but also to Russia as a whole. Moreover, I am certain that the Mi-38 will be in demand on the global market as well. The programme has been given high priority and support by the government. Having met some of potential buyers, we have seen their positive response. Representatives of air carriers have familiarised themselves with a live machine and the advanced technical solutions embodied in it to make it easier for flying and ground crews to operate it. Mention also should be made that according to our estimates, the innovation introduced as part of the programme can influence the advanced helicopters flight hour cost heavily. This is a considerable competitive factor under the current economic conditions. The Mi-38 is in trials now. It is the second prototype, the OP-2, that virtually reflects the configuration sought. We plan that the OP-2 will have completed the factory flight tests in 2011, and we will launch the certification check trials. At the same time, the OP-1 powered by TV7-117Vs (it was designated as Mi-382) is going to complete the developmental tests and, in 2012, will begin its certification trials. In addition, the Kazan Helicopters is completing the construction of the third prototype (OP-3) powered by Russian engines and fitted with a Russian avionics suite; the OP-4, the fourth prototype, will follow it during 201213 to become the standard for Mi-38 production. Overall, we plan to complete the whole of flight test programme during 201213 and switch to full-scale production of the helicopter in 2014. What might be the Mi-38s flight hour cost as planned by Mil? How superior of the in-service Mi-8 and Mi-17 will the advanced
helicopter have to be to prompt keen interest of potential buyers? The issue of flight hour cost is not as simple as it may seem on the face of it. The flight hour cost is generated mostly by the cost of the remuneration of flying and ground crews and the cost of fuel. The influence of the share of the aircraft maintenance cost on the flight hour cost is insignificant. As for the second part of your question, the Mi-38 should be similar to the Mi-8 in terms of flight hour cost, which will prompt potential customers opt for the Mi-38, considering the strengths of the advanced helicopter. Strictly speaking, the Mi-38s service entry with operators may result in a drastic change in their approach to operation. While present-day Mi-8s have to have their main rotor blades replaced every seven to eight years, this will have to be done far less
www.take-off.ru
12
industry | interview
often, if all goes to plan. Under the Mi-38 programme, a new service life policy is being implemented along with introduction of other up-to-date engineering and technological solutions. Will the twin-powerplant Mi-38 concept persist and how can this influence its demand by Russian and foreign customers? The Mi-38 programme is double-track, using a Pratt& Whitney Canada engine and the Russian-made Klimov TV7-117V. This is the philosophy of the programme. In the outcome, the Mi-38 will have two variants of powerplant. We believe this can influence the price of the production machine and cause the interest of foreign operators, on the one hand, and woo Russian customers (both civilian and uniformed one), on the other. I would like to stress that Russian uniformed services have been keen on the Mi-38 due to their need in aircraft like that. Foreign companies have shown interest too. The advanced helicopter is among the best in terms of carrying capacity. Unlike the Mi-8, it hauls 6 t of internal cargo, rather than 4 t, and up to 7 t slung under belly. In addition, the Mi-38 features low vibration and reduced noise and can be flown by a reduced crew of two. What other features, do you think, will attract potential customers? I believe the Mi-38 is a 21st-century helicopter, because we have succeeded in implementing cutting-edge design solutions in it, including up-to-date electronics and materials. By the way, composites make up over 30% of the total volume of materials used in the machine. Such key structural elements as the main and tail rotor blades and fuselage parts are made of composites. We plan that the helicopter will have an extended service life. We assume the Mi-38 will, possibly, have no service life limits, but will be operated on condition instead. In addition, we have equipped it with the Aerosila TA-14 auxiliary power unit (APU), which allowed easier engine start-up and enhanced the quality of ground maintenance. The reason is that the APU will feed power to the heating or air conditioning system and cargo handling equipment on the ground when ambient temperature is too high or too low. The need for an APU like that has been proven by practice; hence, operators require it, especially in case of operations from austere helipads. The helicopter also has been furnished with the third auxiliary hydraulic system enhancing the ease of cargo handling in terms of ground clearance alteration and variation of the ramp position for rolling hardware on and off. Thus, the onboard cargo handling mechanisation system got a generation system of its own and can operate round the clock without excessive noise and emissions. Special mention should be made of the advanced flight navigation system from the Transas company, which we have mounted on the Mi-38. The system is state-of-the-art in terms of automation of helicopter navigation, flight and route modes. The flight navigation system makes it much easier for the pilot to fly, especially in limited weather minimum, in atmospheric precipitations and stiff wind. In addition, Transas has been vested with developing a Mi-38 simulator. Probably, it is the first time in this country when a simulator is being developed at the same time with the development of a helicopter. The simulator we plan to offer to potential customers will imitate the cockpit and agility of the helicopter, responding to the controls and simulating surrounding environment. Transas and we are looking into the feasibility of developing of a separate Mi-38 simulator centre. What is the prospect for the Mi-8/17 family? The Mi-8/17 family has undergone several modernisations, but we believe that its upgradeability has not been exhausted yet and, which is more, they are still in demand throughout the world. Therefore, we are running the so-called reverse upgrade of the family, i.e. use some of the solutions featured by the advanced Mi-38 in older machines. In the near future, most modifications can be applied to the main rotor that we are going to borrow from the Mi-38. We expect it to enable the Mi-38 to fly faster and higher and ensure a new approach to the service life of the rotor system, though no substantial modernisation of the airframe is planned. The Russian Helicopters holding company is running a heavy upgrade programme for the helicopters of the family, with the upgraded machine dubbed Mi-171A2. The Mi-171A1 version, which holds an up-todate airworthiness certificate and international recognition, is to be upgraded. A key objective of the upgrade is to retain the current slice of the market in the niche and enhance the machines safety. The latest model will have a main rotor with allcomposite blades, with the tail rotor to be made of composites too. The main and tail rotors are to feature advanced aerodynamic configurations based on the latest scientific advances and TsAGIs wealth of experience. All the above will facilitate long-term calendar-time operation a considerable increase in service life. At the modelling stage, we managed to produce a speed of 280 km/h with power and control margins remaining. The advanced aircraft also will feature extended range 800 km in
Andrey Fomin
Mi-38 fist flying prototype re-engined by Klimov TV7-117V turboshafts got Mi-382 designation
www.take-off.ru
13
industry | interview
Mil Moscow Helicopter Plant
the baseline configuration. The upgraded helicopter also is to carry a flight navigation system handling the same functions its counterpart on the Mi-38 does. During MAKS 2011, we demonstrated the upgraded Mi-17-1V, for which development we paid out of pocket. It is fitted with the IBKV-17 flight navigation system from Transas. Once the machines test programme had been complete, we offered the aircraft to the Russian Defence Ministry and foreign customers. Not long ago, Russian Vice-Premier Sergei Ivanov said 800 light helicopters would be needed throughout 2020 to renovate the civil aviation aircraft fleet. Light helicopters have been in special demand abroad of late owing to their ability to shoulder some of the functions handled by medium helicopters at
far lower unit and operating costs. In this connection, could you tell us of the work Mil is doing in the light helicopter field and what has been emphasised in this segment of the Russian helicopter industry? Right, light helicopters are an important thing Mil has been dealing with for quite a while. Today, the Mi-34 is our priority in this class, it was developed from the outset to ensure basic training of helicopter pilots and participation of Russian helicopter sports teams in competitions. The development of the Mi-34 was launched as far back as the Soviet times with the use of the specifications requirement from the Soviet Defence Ministry. The machine cleared its official trials milestone in 1986, its compliance with the specifications requirement was confirmed and a
report recommending its full-scale production was issued. Actually, the helicopter proved to be a success, with a takeoff weight of 1,450 kg. Its design enabled its crew to pull of aerobatics more inherent in fixed-wing aircraft than in helicopters, e.g. the loop and roll. On the other hand, the Mi-34, which later found itself in a different country under different economic conditions in fact, could not always rival some of the foreign helicopters in the class, e.g. those from Robinson or Schweitzer. Given request from civilian customers, however, we have had the helicopter certificated and we have dubbed it Mi-34C. The next phase of the Mi-34 programme kicked off several years ago. As part of working out an advanced helicopter family by Russian Helicopters holding, we took due account of the high demand of up-to-date light helicopters, and the Mi-34 then got its second wind, in fact. The latest helicopter has been designated as Mi-34C1. It has retained all of the advantages of the baseline sports version, but has gained commercial traits that are so important to operators. In particular, we have managed to extended its range out to 450 km, its engine has been replaced with a more powerful one, the degree of comfort has grown and the appearance of the machine has improved, i.e. we have implemented what normally stems from successful sales of any advanced aircraft. This summer, we made two prototypes dubbed OP-1 and OP-2 a trainer variant for Russian Defence Ministry flight schools and a commercial version respectively. Early in August, the OP-2 conducted its maiden flight on the premises of the Mil Moscow Helicopter Plant in Tomilino, Moscow Region. The advanced machine was demonstrated as part of MAKS 2011s flight programme, evoking keen interest on the part of civilian and military potential customers. To date, tentative agreement has been achieved or orders for dozens of machines have been awarded by a number of Russian and foreign helicopter users, particularly, the UTair company. Foreign customers have shown interest in the Mi-34C1 too. We expect the Mi-34C1 to meet the requirements of most exacting consumers. The Mi-34C1 certification programme is slated for completion by year-end 2011. This will allow the machine to enter fullscale production at the Progress plant in Arsenyev and kick off its deliveries in 2012. In our opinion, the Mi-34C1 will be in high demand as an initial training helicopter. Now, it will be more comfortable to both the instructor-pilot and the rookie. What are the features of the latest Mi-34 version?
www.take-off.ru
14
industry | interview
Mi-34C1 second flying prototype (OP-2) in commercial version
Mil Moscow Helicopter Plant
The Mi-34C1 features a modified configuration, the upgraded M9FV engine and improved flight performance, as well as an advanced control system. As is known, the simplicity and cost of the first version of the Mi-34 were maximised; in particular, its control system was mechanical and required that the pilot should make a lot of physical effort in certain operating modes. The helicopter has been furnished with the hydraulic system, so even a woman will be able to control it without too much effort. We have used foreign-made components. The Goodrich company is our partner in
Andrey Fomin
terms of components. It has provided the hydraulic actuators it has developed and made. Now, the machine will surpass the popular Robinson R44 in terms of performance, in particular, the Mi-34C1 will have a higher static ceiling. The helicopter seats three passengers and a pilot or 400 kg of cargo. With the 1,450-kg maximal takeoff weight, it flies at a maximum speed of 220 km/h out to 450 km (as far as 910 km on extra tanks). Special mention should be made that the traditional steam-gauge type instruments can be replaced at the customers request with the
Mi-34C1 first flying prototype (OP-1) in a trainer version for Russian Air Force
glass cockpit, where all data are shown on colour multifunction liquid-crystal displays. We have scrutinised the major foreignbuilt helicopters in the class, introduced modifications and got a well-designed machine with high design flight and operating characteristics that, hopefully, will be fully proven during the trials. Throw a rather attractive price in for good measure. Could you give us more detail on the Mi-34C1s advantages over the R44? As is known, full-fledged competition requires the best or comparable economic efficiency and flight hour cost in addition to top-rate flight performance and streamlined maintenance. Probably, UTair has preferred the Mi-34C1 to the R44 for a reason, hasnt it? Under the Mi-34 modernisation specifications requirement, we needed a considerable service life extension we intend to achieve a helicopter service life of 15,000 flight hours and the 5,000-flight-hour service life of the assemblies as well as ensure a 1,0001,500-h increase in the time between overhauls at first and then extend it even further up to 1,700 flight hours. It will be a helicopter on a par with Western analogues or even better in terms of service life. As far as the Mi-34C1s service life and flight hour cost are concerned, the machine will be rather competitive. To my mind, its flight hour cost will be at least 1.5 times lower than that of its foreign rivals. Therefore, we are optimistic about the future of our machine both in Russia and abroad.
take-off november 2011
www.take-off.ru
15
industry | report
"ALLIGATORS" HOMELAND
Report from Arsenyev
Alexey Mikheyev
Early September marked the 75th anniversary of the Arsenyev-based Progress aircraft company named after N.I. Sazykin, a subsidiary of the Russian Helicopters holding company. Over three quarters of the century, the company has made almost 9,500 Yakovlev trainer and aerobatic planes, built Antonovs light transports and sports gliders and, for the past half a century, missiles for the Soviet and Russian Navy. However, helicopters have become the best-known product of the plant. The famous Mi-24 had been in production here for two decades before it was succeeded by Kamov machines first the Ka-50 and then the Ka-52. Serious changes began at the plant after it had become a subsidiary of Russian Helicopters holding: a radical production facility modernisation kicked off, governmental orders for Ka-52 construction have been awarded and work on resuming the production of the upgraded Mi-34C1 and productionising the Ka-62 new-generation multirole medium helicopter is underway. Owing to the kind invitation by Russian Helicopters, the Take-off magazine editor has been to the company and seen how advanced technologies and cutting-edge manufacturing equipment are being phased in and how Progresss current product, the Ka-52 combat helicopter, is assembled.
16
www.take-off.ru
New times
The Oboronprom corporations establishing its Russian Helicopters subsidiary in 2006 launched a consolidation of the Russian helicopter industry and its reaching a new stage of evolution. During 200810, Russian Helicopters became the managing company for all key Russian helicopter developers and manufacturers, including Progress, made up its mind on its future product line and started ramping up the helicopter output and deliveries. Progress was tasked with launching production of the Ka-52 combat helicopter and resuming production of the lightweight Mi-34 in upgraded Mi-34C1 version as well as productionising the new-generation Ka-62 medium multirole helicopter. In addition, Russian Helicopters not only launched a proactive campaign of negotiations with the government and potential commercial customers about rotorcraft promotion and new orders, but began to invest heavily in renovating the production facilities, buying cutting-edge manufacturing equipment and building advanced helicopters as well. Thus, the things looked up following almost a decade and a half of Progresss stagnation, and new helicopters started rolling out of the shops at an everincreasing rate in 2008.
Aircraft production by Progress plant
Aircraft type Years of production UT-2 19411948 Yak-18 19481955 Yak -18U 19551957 Yak -18A 19571961 Yak-18P 19611962 Yak-18PM 19701972 Yak-50 19731986 Yak-55 19861991 Yak-55M 19911994 Yak-54 since 2008 An-14 19651970 Mi-24 (A, V, P, VP) 19701990 Mi-34 since 1993 Ka-50 19912009 Ka-52 since 2008 * Production is going on Output rate 3,818 3,063 940 927 125 25 314 108 110 5* 330 2,443 13* 12 20*
Andrey FOMIN
www.take-off.ru
17
industry | report
Since Kamov built its Ka-52 prototype as far back as 1996 and the helicopters design had been upgraded several times since then, several prototypes more were required in support of completing the official test programme and honing all advanced avionics. Making them was how Progress began to work under the programme. In 2008, Progress used the remaining Ka-50 backlog to make the second and third Ka-52 prototypes (serials 062 and 063) handed over to Kamov for trials. By late 2009, the plant had made the first production batch of three helicopters (side numbers 51, 52 and 53) that entered the official test programme too. Under the late 2009 governmentawarded order, Progress was manufacturing more production-standard machines without
Andrey Fomin
waiting for the tests completion. According to the media, the order stipulated the delivery of 36 production-configuration Ka-52s. However, that was only the beginning In December 2010, four production Ka-52s were brought to the Army Aviation Combat and Conversion Training Centre (CCTC) in Torzhok for opeval, with the machines given serials 92, 93, 94 and 95. In May of this year, the first eight-ship production-configuration Ka-52 batch was delivered to the Army Aviation air base in Chernigovka in the Russian Far East, near the manufacturing plant.
Thus, Progress has built and delivered 15 production Ka-52s over less than three years. As of early September, the assembly shop contained nine more machines of the fourth, fifth and sixth production batches at different degrees of completion, with three more aircraft having been handed over to the flight test facility by then. One of them flew under the demonstration flight programme on 3 September on the occasion of the companys 75th anniversary. Attending the companys anniversary celebration at the time, Oboronprom Director General Andrey Reus and Russian
Helicopters holding Director General Dmitry Petrov officially announced to the media the signature of a new long-term contract for over 140 Ka-52s for the Russian Defence Ministry throughout 2020. According to Dmitry Petrov, the contract was signed on 31 August, e.g. right in the run-up to the 75th anniversary of Progress, having become the best anniversary present to the team of the plant. It is important that the Russian Navy, too, plans to order helicopters of the type in the near future. As is known, the Ka-52K shipborne multirole combat helicopter is
www.take-off.ru
18
Andrey Fomin
industry | report
to become the main strike capability of the air groups to be deployed on Mistral-class amphibious assault ships. Kamov is developing a shipborne variant of the machine to be furnished with folding main rotor blades and folding wings as well as a number of other modifications. Progress Managing Director Yuri Denisenko told the media that the Ka-52K was planned to enter fullrate production in 2014. In addition, proactive efforts are being made in cooperation with the Rosoboronexport company to promote the Ka-52A export version on the global market. Several countries showed keen interest in buying such a helicopter several years ago. Orders for the Ka-52 will have a considerable influence on the workload of Progress in the near future. However, the manufacturer will not limit itself to making the Ka-52 alone. Next year is supposed to see the kickoff of production of the upgraded Mi-34C1 light helicopter. Initially, the manufacture of the early production-standard Mi-34C1s will have to rely on the Mi-34C backlog preserved, with five airframes of the third and fourth production batches sitting in the assembly shop now. The Mil Moscow Helicopter Plant launched the flight tests of the Mi-34C1 prototypes in August. The type certificate supplement is expected to be obtained by early 2012, which may be followed by the first deliveries next year. The UTair company has ordered 10 aircraft, and a preliminary agreement has been reached with a French company to promote the Mi-34C1 on the West European market. In addition, possible deliveries to the Russian Defence Ministry for use as a primary training light helicopter look rather promising too. Another high-profile programme for Progress to run is development and production of the Ka-62 medium multirole helicopter designed to carry 14 passengers or 2,0002,700 kg of cargo. Kamov is finishing the design, working out the design documentation and handing it over to the manufacturing plant. According to Russian Helicopters Director General Dmitry Petrov, the first Ka-62 prototype can be built in Arsenyev as soon as 2012. Probably, he meant the airframe of the prototype. Turbomeca is expected to deliver its first several Ardiden engines by late 2012 under the contract signed this spring. The Ka-62 prototype will be able to take to the air in 2013 after it has been assembled and fitted with the powerplant and avionics. The same year, Progress is to make two more flying prototypes and a static-test one. The certification trials are set to be completed in 2015, with deliveries of production Ka-62s
Andrey Fomin
Andrey Reus, Oboronprom Director General, and Dmitry Petrov, Russian Helicopters Director General, announced the signature of a new long-term contract for over 140 Ka-52s for the Russian Defence Ministry
anticipated to begin in 2016. From the outset, the helicopter has been developed to meet stringent EASA requirements, which is to ensure its success on the Russian and global markets owing to its performance being similar to that of its foreign rivals and its price being less expensive. According to Dmitry Petrov, the Ka-62 is to be cheaper than its AgustaWestland and Eurocopter competitors by about a quarter. In addition, the 2020 Governmental Armament Programme stipulates delivery of a militarised Ka-62 version to the Russian Defence Ministry.
Remaining production backlog of Mi-34C airframes will be used for manufacturing of the new Mi-34C1 helicopters initial batch
www.take-off.ru
19
industry | report
Alexey Mikheyev
Yuri Denisenko, Progress company Managing Director, told media that the plant will be ready to start production of the Ka-52K ship-borne helicopters in 2014
single spacious shop housing Russias only Italian-made integrated mechanised manufacturing to make aluminium, magnesium and cast iron/steel moulds and casts. The advanced technology allows enhanced precision casts, improvements in their characteristics and manufacture of moulds for magnesium, aluminium, steel and cast iron
with the use of the same equipment. With the introduction of an advanced foundry, Progress will make cases for helicopter main and accessory gearboxes for both the Ka-52 and other machines made by the subsidiaries of Russian Helicopters holding. Since 2009, the machining facility has been upgraded heavily too. It has been beefed up with a software-controlled machining shop using the latest lathes and five-coordinate turn-mill machining centres from Germanys DMG and Japans MAZAK as well as lathes from CTX. This has boosted the precision of machining of odd-shaped parts and the labour productivity. Sophisticated instrumentation systems acquired by the company are used for quality assurance. The upgrade of Progresss foundry and machining facilities has been a cause of its output rate increase under contracts made of late. According to the annual report published at the companys website, the marketable output revenue grew fivefoldplus between 2007 and 2010. An almost
twofold increase over last years showings is expected this year, with the revenue to account for 14.2 billion rubles, of which about 67% are to fall on Ka-52 helicopters and 27% on naval missiles. The output rate growth has resulted in more jobs created, which number has increased by 1.5 times over the past five years from 3,700 in 2007 to 5,500 in 2011. The company hires 300500 personnel annually. According to Progress Managing Director Yuri Denisenko, the workforce exceeds 6,000 personnel, of whom a third are young people aged up to 35. The average age of workers has diminished from 48 to 43 years in the last four years. The recently-landed lucrative governmental order for Ka-52s and upcoming productionising of the Mi-34C1 to be followed by the Ka-62 indicates that Progresss output rate will keep on increasing and the company, which used to build a hundred Mi-24s a year during the 70s and 80s, will reclaim the status of a major helicopter maker in the country.
Alexey Mikheyev
20
www.take-off.ru
industry | report
Alexey Mikheyev
17th production Ka-52 took part at the airshow dedicated to the Progress company 75th anniversary on 3 September 2011
www.take-off.ru
21
industry | company
other passenger and transport airplanes powered by engines of D-436 family. It ensures starting of propulsion engines and supply of compressed air and electric power to on-board systems of airplane when propulsion engines are not operating. High effectiveness of utilization of AI-450-S auxiliary gas turbine unit is achieved due to low specific fuel consumption resulted from high parameters of thermo-dynamic cycle, high efficiency of components and selection of a scheme with air bleed from service compressor, as well as due to low operational expenses. Nowadays, small aircraft are in big demand in the world, and for that reason MOTOR SICH JSC aside from participating in the works of building up small-size turbo-shaft engines of AI-450 family with 450 to 600 hp capacity carried out by IVCHENKO-PROGRESS SE, carries out itself R&D work related to similar family of MS-500V engines of 600 to 1,000 hp capacity class. Now, the efforts of these two enterprises are concentrated on AI-450 version intended for replacement of GTD-350 engines in Mi-2 helicopters manufactured earlier. Turboshaft engines of S-500V family are intended to be installed in helicopters for various purposes with take-off weight of 3.5 to 6 tons. At present time, MOTOR SICH JSC carries out test bench finalizing of gas-dynamic parameters and finishing work for single-shaft gas generators and full-size engines. In the course of developing MS-500V, such design solutions were used that allow future creation of its turboprop and turbofan versions, as well as auxiliary engines. AI-222 family engines are capable to provide maximum thrust from 2,200 to 3,000 kgf, and up to 5,000 kgf with afterburner installed. Batch production of AI-222-25 engine with maximum thrust of 2,500 kgf has begun for Yak-130 combat trainers that already started to arrive to Air Force pilot training centers in Russia and Algeria. AI-222-25 (without afterburner) and AI-222-25F (with afterburner) versions are designed for L-15 twin-engined combat trainer built up by Hongdu Aviation Industrial (Group) Corporation from China. AI-222-25F became the first afterburner engine designed and manufactured in Ukraine. Now it is in the process of flight testing in L-15 LIFT (Lead-In Fighter Trainer) airplane. It is possible that in future this engine will be installed in combat versions of Yak-130 aircraft. On 23rd of June, 2011, at MOTOR SICH JSC facilities, the first starting of MS-14 turboprop engine of 1,500 hp capacity class was performed. It is intended to be used as replacement engine for An-2 airplane and also can be installed in other aircraft of similar class. TV3-117VMA-SBM1 turboprop, the predecessor of MS-14, is installed in An-140 passenger regional airplanes which perform regular ar flights in Ukrainian and foreign airlines. Its ts operation in severe conditions of Yakutia is especially intensive.
MOTOR SICH
AT DUBAI AIRSHOW
MOTOR SICH JSC is a multi-profile science intensive company dedicated to engineering, production, testing, support in operation and repair of up-to-date airplane and helicopter engines for various purposes. Aircraft powered by aeroengines manufactured by MOTOR SICH JSC are operated in more than 120 countries of the world. Many of the engines became world leaders in their class. So, AI-25TL engine lifts to the sky the L-39 trainer from Czech Republic which is operated in 41countries. Turboshaft engines of TV3-117 family ensure flights in 63 countries of virtually all middle capacity helicopters made in Russia. D-18 engine is designed for Ruslan and Mriya transport airplanes, and D-136 engine, the most powerful in the world, for i-26 helicopters. Today, production of D-436-148 engine for new regional airplanes of An-148 family is one of the priorities of MOTOR SICH JSC activity. This engine complies with modern requirements of ICAO to pollutant emissions and ensures noise level of n-148 airplanes below established standards. I-450-MS two-shaft auxiliary gas turbine unit is created at MOTOR SICH JSC for various versions of An-148 and
An-158
D-436-148
22
commercial
www.take-off.ru
i r y | c |o m p n ndust a y
In year 2007, MOTOR SICH JSC received certificate for TV3-117VMA-SBM1V a new helicopter engine designed by the company. This engine was built up bearing in mind the purpose of enhancement of helicopters flight performance and their combat effectiveness, especially when operated in high mountain areas of hot climate countries. By its characteristics, it meets contemporary technical requirements. It has total service life of 12,000 hours or 12,000 cycles and time till first overhaul of 4,000 hours or 4,000 cycles. Engine power conditions are appropriately adapted to operational conditions of various types of helicopters. Its automatic control system allows to set up one of the following take-off power ratings: 2,500, 2,400, 2,200 or 2,000 hp and ensures keeping it flat to higher ambient air temperature and flight altitude, if compared with existing versions of TV3-117V family engines including VK-2500 installed in Mil's and Kamov's helicopters. In order to increase safety of flight with one engine inoperative, 2.5-min power rating equal to 2,800 hp and 30-min power rating equal to take-off power were introduced. The possibility was also confirmed to use two variations of continuous power rating equal to 2,800 hp with one engine inoperative during 60 minutes. Installation of TV3-117VMA-SBM1V engines in helicopter allows to increase its climbing capacity and practical ceiling altitude, as well as to maintain high flight performance characteristics of helicopters with dust protection and exhaust shield devices installed. In the course of flight testing, Mi-24 helicopter powered by TV3-117VMA-SBM1V engines demonstrated record climbing capacity: it climbed the altitude of 5 km in 9 minutes only, while Mi-8MTV helicopter powered by TV3-117VMA-SBM1V engines reached the record altitude of 8.1 km.
AI-222-25
Official bench tests of TV3-117VMA-SBM1V engine according to program approved by Russian Air Force Commander-in-Chief and agreed with Mil Moscow Helicopter Plant and Kamov JSC were successfully completed in June this year at the Russian Ministry of Defence aircraft repair plant in Gatchina. The work is in progress to upgrade the engine as a result of implementation of new technical solutions. First of all, they deal with engine Automatic Control System which will be replaced with a digital system (FADEC) built up by STAR JSC (Perm). Utilization of this ACS shall result in further enhancement of engine and helicopter performance. TV3-117VMA-SBM1V series 4 and 4 versions (with air and electrical starting systems) are intended to be used as replacement
Yak-130
engines for Mi-8T helicopters produced earlier with TV2-117 engines in order to enhance their flight performance, particularly when they are operated in hot climate conditions and high mountain take-off platforms. They inherited the best design solutions aimed to ensure higher parameters and life time which were worked through in TV3-117VMA-SBM1V base engine. This allowed to set total life time of 15,000 hours/ cycles and introduce 2.5-min and 30-min emergency power ratings for operation with one engine inoperative. This year, during Dubai Airshow 2011 exhibition, on the basis of MOTOR SICH JSC center in UAE, the 2nd international scientific and technical conference Improvement of After-sale Service of Aeroengines will be carried out. We sure are su that such kind of conferences shall in result i establishment of mutual understanding trust and tru between operators and engine manufacturer facture and contribute to the solution of our principal princip task to ensure trouble-free operation planes of plan and helicopters. Today Tod MOTOR SICH JSC carries out active consistent searching of reliable partners, and co extends extend existing and discovers new segments of market of aeroengines. We hope that these world m efforts shall materialize in absolutely concrete results of cooperation with aviation industry of countries. MOTOR SICH JSC is capable other c offer to offe a large variety of state-of-the-art engines for new airplanes, helicopters and UAVs development. opmen
Motor Sich JSC 15, M Motorostroiteley av. Zapor Zaporozhye 69068, Ukraine Tel.: + (061) 720-48-14 +38 Fax: + (061) 720-50-05 +38 E-mai E-mail: motor@motorsich.com, eo.vtf eo.vtf@motorsich.com http:// http://www.motorsich.com
Ka-52
TV3-117VMA-SBM1V
www.take-off.ru
commercial
23
T-50
24
take-off november 2011
Andrey FOMIN
Aircraft
Actually, no surprises concerning the T-50s design were expected from its debut demonstration at MAKS 2011. The customer did not allow static display of the fighter, and its takeoffs and landings even had to be performed at a distance from the crowd. To this end, every day, early in the morning, the tarpaulin-clad prototypes would be towed from the Sukhoi flight test facilitys apron to a spot in a taxiway near the end of the runway and be towed back at night. Takeoffs would be performed far away from the crowd too, with the run commencing from about the middle of the runway, which length, thankfully, exceeds 5,400 m. By the way, given todays advances in photographic gear, this did not prevent numerous reporters and aviation spotters from taking many quality pictures of the fighter from all aspects possible both on takeoff and
www.take-off.ru
No doubt, the spice of the MAKS 2011 air show in Zhukovsky, Moscow Region, in August was the long-awaited unveiling of prototypes of the Future Tactical Fighter (Russian acronym PAK FA) Russian fifth-generation fighter T-50 the Sukhoi company is developing in cooperation with its engine, aircraft material, avionics, airborne systems and weapons subcontractors. The PAK FA made its debut on the second day of the show, when both flying T-50 prototypes were demonstrated in flight to Russian Premier Vladimir Putin. They flew as a pair, after which the Sukhoi design bureaus test pilot Sergey Bogdan flew aerobatics on the T-50-1. On the following days of MAKS 2011, the second T-50 prototype, the T-50-2, was used in the flight demonstration programme. It would first lead a Sukhoi aircraft troika with a Su-34 and a Su-35 as its wingmen and then perform solo aerobatics. Although no characteristics of the plane have been published officially, many interesting things related to the PAK FA programme to a certain degree could be seen in the pavilions of MAKS 2011. So, what did we learn about the Russian fifthgeneration fighter during the air show?
PAK FAs second flying prototype airlifted from Komsomolsk-on-Amur in early April is flying in Zhukovsky since 10 August 2011
landing, on the one hand, and during its flypasts and aerobatics. Again, the T-50s demonstration did not serve any surprise as its design and layout features had been known in advance owing to the official pictures published by Sukhoi since the maiden flight of the T-50-1 on 29 January 2010 and to numerous photos on the Internet, which were taken during the demonstrations to Russian and Indian national and military leaders in 201011. A rather large T-50 model was on display for the first time at Sukhois stand in the UAC pavilion, but it was impossible to see in it anything capable of adding to what had been known from the pictures. A full-scale exhibit on display at the stand of the ORPE Tekhnologiya company a composite fuselage midsection panel. As is known, a sizeable part of the T-50s structure is made of composites, including the
www.take-off.ru
large-size load-bearing panels, and this is a feature of the plane, setting it apart from the previous-generation Russian fighters. According to Sukhoi, both PAK FA flying prototypes had logged 84 sorties by the beginning of MAKS 2011. Following another demonstration to an Indian delegation on 14 June, the T-50-1 was being given scheduled improvements, in the course of which it was fitted, inter alia, with the antispin chute in a special container housed by the tip of the central tail boom. This may be an indication of the planes preparedness for operating envelope expansion tests, including flying at high alpha. With the improvements introduced, the plane was flown out on 4 August. The aircraft flew several missions more as part of preparations for the show, pulled off aerobatics with certain g-load and speed limitations after the flypast with the T-50-2 and then was not demonstrated at the show any longer.
The second flying prototype that first flew in Komsomolsk-on-Amur on 3 March this year was airlifted by an An-124 to Sukhois flight test facility in Zhukovsky on 3 April, but it had been flown out here only a week before the show, on 10 August. For four months, it had been subjected to the debugging and improvement programme too. The T-50-2 (side number 52, or 052), is similar to the first prototype, including in terms of the paintjob. It differs only in minor details. For instance, it carries several sensors of the integrated electro-optical system instead of the mockups equipping the T-50-1, and the design of the movable section of the cockpit canopy has been modified. During the two-ship flypast at the official opening of MAKS 2011 on the afternoon of 17 August, the T-50-2 was flown by Sukhois test pilot Roman Kondratyev, with the programme
take-off november 2011
25
Yuri Stepanov
Andrey Fomin
K-36D-5 ejection seat with a dummy pilot in PPK-7 g-suit and ZSh-10 helmet
by thousands of onlookers and filmed by TV cameras on 21 August made quite a stir among the public. The aircraft and engine developers, however, assured that it was no drama, rather a routine thing in the trials of a prototype and that the plane would return to flight in the near future. Indeed, the T-50-2 flew under the flight test programme with a swing in September. KnAAPO is to complete the assembly of the third flying prototype and launch its testing this summer. The T-50-3 is planned to be fitted with the main forward looking AESA radar and a complete integrated electro-optical system as well as other advanced avionics system making it more like the future production-standard aircraft. The fourth flying prototype and assemblies for subsequent aircraft are being manufactured too.
chief test pilot, Hero of Russia Sergey Bogdan, flying on the remaining days. On the final day of the show, the T-50-2 experienced a right engine surge while taking off in difficult weather conditions. The surge was caused by FADEC malfunction with a large flame exiting the nozzle. Sergei Bogdan had to abort the takeoff. Having deployed the drag chute and applied the brakes in an emergency manner, he stopped the plane before the end of the runway and taxied in to the apron. The incident seen
Engine
The so-called first-stage engine to equip the PAK FA is in the preliminary trials now, Yevgeny Marchukov, General Designer, Lyulka Scientific and Technical Centre (Moscow affiliate of NPO Saturn Scientific and Production Association), said at MAKS 2011. The preliminary stage includes bench and flight tests. It is the most labour-intensive period in terms of both time and money. Some of the elements of what has been implemented in the advanced
first-stage engine had built upon the solutions developed for the 117S engine to fit the Su-35 fighter, particularly, the designing techniques and technologies of processing most sophisticated structural elements. A cutting-edge automatic control system has been developed for the engine and it has been based on Russian-made componentry for the first time. The systems architecture and control algorithm are Russian too, Yevgeny Marchukov said, adding that more than 20 engines were built to date. The engines performance has been proven beyond any doubt through bench tests. Its flying performance will have been evaluated by year-end, and we should be ready to launch the official test programme by 2013, he specified. The engine itself, known as 117, was not shown at MAKS 2011. The same time, United Engine Corp.s exposition at Oboronproms pavilion sported the known 117S afterburning turbofan powering the Su-35 and Su-35S fighters now. First-stage engines will not only power all T-50 prototypes and LRIP aircraft, but, probably, the early production planes as well. In the future, the fighter is going to be fitted with the so-called second-stage engine now under development by NPO Saturn as part of the United Engine Corporation. The work has begun. We will fulfil it on schedule, Oboronprom Director General
www.take-off.ru
26
T-50-1 got an antispin chute in its fuselage tail section during scheduled improvements held since mid-June through early August 2011 for operation envelope expansion tests
Ejection seat
During the air show, many interesting things could be seen at the stand of the Zvezda Scientific and Production Association named after Guy Severin. There, the new K-36D-5 ejection seat for the fifth-generation fighter was unveiled, as was the pilots equipment comprising the PPK-7 g-suit, ZSh-10 helmet and KM-36M oxygen mask. The K-36D-5 ejection seat is a next spiral of the evolution of the K-36D-3.5
ejection seat fitting the advanced versions of the MiG-29 and Su-27 (Su-30) fighters. According to Zvezda, it differs from the baseline model in the extended pilot weight and operating temperature brackets, enhanced minimal ejection altitude characteristics and reduced maintenance time. It was reported that, combined with the pilots protective gear, the K-36D-5 ejection seat enables the aircrew to withstand manoeuvring g-load from -4 g to +9g, longitudinal g-load from -6g to +6g and lateral g-load from -4g to +4g. Safe ejection is ensured for the 020,000-m altitude
bracket and 01,300-km/h IAS bracket, including the 00 mode, with an ambient temperature from -60 to +74 deg. C and pilots weight of 55125 kg.
www.take-off.ru
27
Ivan Kirillov
Yevgeny Yerokhin
demonstrated the second AESA prototype embodying a number of improvements stemming from the lab bench tests. The array is an ellipse measuring about 0.9x0.7 m. In addition to the AESA, the developer displayed during MAKS 2011 a full-scale multichannel T-R module the AESA is made up of and an L-band AESA to be housed in the wing leading edge. According to Tikhomirov-NIIP Director General Yuri Bely, the third AESA example, which has passed its bench tests, will have been delivered to Sukhoi and mounted on the third T-50 flying prototype this year. More AESAs are being manufactured (for more detail on the AESA radar for the PAK FA, see Yuri Belys interview in this issue). Tikhomirov-NIIPs old-time partner, State Ryazan Instrument Plant (GRPZ), demonstrated at the airshow the units of the N-036EVS computer system supporting the operation of the AESA radar and designed to receive and process high-capacity analoguedigital signals and control and automate complex processes in real time. The N-036EVS computer system comprises two high-performance digital computers based on the united switching computing environment and united
Andrey Fomin
Tikhomirov-NIIP X-band AESA and one of its multichannel T-R modules (upper left)
into a single computer system by means of high-performance optical interfaces. Other novelties from GRPZ at MAKS 2011 were the 4283E AESA two-band digital IFF interrogator and 4280MSE multifunction integrated IFF responder. A surprise sensation at the airshow was made by the Urals Optical and Mechanical Plant (UOMZ), which demonstrated the basic mod-
ules of the integrated optronic system displayed at MAKS 2011 as Product 101KS. According to the materials disseminated during the show, the T-50s optronic system will comprise the 101KS-V IRST for aerial target acquisition, identification, pinpointing and tracking, the 101KS-U aerial and ground situation awareness subsystem, the 101KS-O optronic defensive aids suite and the 101KS-N podded IRST
Andrey Fomin
Top: 101KS-V air-to-air IRST station (left) and 101KS-N podded air-to-ground optronic system (right) Bottom: 101KS-U missile launch detection system (left) and 101KS-O optronic defensive suite (right)
Andrey Fomin Andrey Fomin
28
www.take-off.ru
ensures multichannel data exchange via highcapacity enhanced frequency band channels and implementation of the reprogrammable radio concept, flexible comms gear architecture software/hardware rearrangement and quick adaptation to simultaneous operation in different comms systems and networks. Tidbits of information on the weapons suite of the future PAK FA were avail-
able at the stand of the Tactical Missiles Corporation, which showcased, inter alia, internal carriage missiles with the export designations Kh-38MLE and Kh-58UShKE and the advanced KAB-250 smart bomb as well (for detail on latest weapons from Tactical Missiles Corp., which could make their way to the fighters weapons suite, see further in the issue).
T-50-2 rolls after another demo flight at MAKS 2011. On 3 November 2011 it performed the 100th PAK FAs test flight
www.take-off.ru
29
Alexey Mikheyev
Sergey Lysenko
YURI BELY
take-off november 2011
Mr. Bely, let us start with the main innovative programme of Tikhomirov-NIIP, the AESA radar for the fifth-generation fighter. What is the status of the programme? What did you achieve? PAK FAs AESA radar system development is right on schedule approved by the prime contractor for the plane, the Sukhoi company. Under the schedule, two prototypes are being rig-tested, with one more being ready for installation on a PAK FA prototype. This, third, AESA radar prototype will be handed over to Sukhoi, and it will begin to work on board the third flying PAK FA aircraft. Manufacture of more radars is under way, e.g. the fourth set is being assembled to fit another PAK FA prototype and the fifth ones manufacture has begun. The first AESA radar has logged two years on our test rig, most of its issues have been ironed out and its software is being refined now. The second AESA complete set has been placed on a test rig earlier this year and will soon be handed over to Sukhoi as part of the PAK FA avionics suite for rig testing. The third example has completed its rig tests and now is ready for mounting on a plane. The fourth set is to be made before year-end. Our institute performs the assembly, adjustment and rig testing of the AESA radars so far, and at the same time, its productionising is underway at the State Ryazan Instrument Plant (GRPZ) that is setting up new manufacturing lines and buying advanced equipment and has erected a special shop to this end. The plant also has taken part in the manufacture of the AESA radar since its early examples had been made; in particular, it has been making the distribution system, waveguide
www.take-off.ru
30
While working on the AESA, you do not neglect passive phased-array radars either, do you? Certainly, we have developed the unique phased-array radar, the Irbis-E, with an airborne target acquisition range of 400 km. Three prototypes of the radar have been undergoing their flight trials on two Su-35 prototypes and a Su-30MK2 flying testbed for several years now. This year, the first production Su-35S fighter built by KnAAPO Komsomolsk-on-Amur Aircraft Production Association under the Russian Defence Ministry-awarded contract has entered its trials. It carries a full production-standard Irbis set made by GRPZ plant at its production line. Tikhomirov-NIIP staff has been proactive in supporting the radars flight tests, its productionising by GRPZ and settling all issues cropping up in the process. Mention should be made that the radar has a good prospect not only on board the Su-35. We have received inquiries as to the feasibility of using Irbis-E derivatives on board ships and as part of ground-based radar systems. We have not neglected the Irbiss predeces-
sor, the Bars phased-array radar, which is in mass production and exported extensively as part of the Su-30MKI fighters and its versions to India, Malaysia and Algeria. As is known, the Russian Defence Ministry, too, has recently decided to buy a batch of aircraft like that, designated as Su-30SM, in the near future. We have got a contract with the Sukhoi company for development of a Bars version to fit these fighters. We also are taking part in the programme on upgrade of the Indian Air Force Su-30MKIs. Provision has been made for enhancing the performance of the Bars radar and its current phased array and, possibly, fitting the radar with an AESA further down the road. However, we believe that such an upgrade of the Bars should be conditioned on the programme for development of an AESA radar for the Fifth-Generation Fighter Aircraft (FGFA) being co-developed by Russia and India, so that our experience in developing the AESA can be used in subsequent upgrade of in-service Su-30MKI fighters. Do you continue to upgrade other airborne radars you developed? We certainly do. We are further honing our first phased-array radar, the Zaslon, used on the MiG-31 interceptor. The upgraded MiG-31BM has kicked off the second phase of its official trials recently. Advanced operating modes are being implemented into its Zaslon radar, to which new long- and medium-range missiles are being adapted as well. The MiG-31s tactical capabilities will grow by far owing to the ongoing upgrade. In addition, Su-27SM(3) fighters have been fielded with Russian Air Force combat units this year. We have upgraded their N001 fire control radar again, with advanced operating modes introduced and modified medium-range missile application ensured. The work is going on.
take-off november 2011
Tikhomirov-NIIP
www.take-off.ru
31
Andrey Fomin
The organisers of the Tactical Missiles Corp.s exposition at the MAKS 2011 air show in Zhukovsky last August altered their approach to demonstrating their advances to a more pragmatic one. During the news conference in the course of the show, Tactical Missiles Corp.s Director General Boris Obnosov noted that the companys exposition displayed only the new weapon systems that were in the final stages of the official trials or had passed them this year. All of the displays are to be manufactured both in the export version and in the configuration designed for the Russian Air Force, with some of them being prototypes of the weapons to fit the star of the air show the Future Tactical Fighter, or the Sukhoi T-50 fifth-generation fighter.
The Raduga Kh-58UShKE antiradiation missile displayed at MAKS 2011 is designed for both internal and external carriage. Its weight is 650 kg and its range measures 76245 km when launched externally. It differs from the venerable Kh-58E in a shorter length, a pop-up wing, shorter-span vanes and a single wideband passive radar homer acquiring all known air defence radar bands. A big TV screen at Tactical Missiles Corp.s stand at MAKS 2011 displayed an animation clip showing how four missiles of the type would be housed by the inner bay of the fifthgeneration fighter. According to Mr. Obnosov, the official tests of the Kh-58UShKE are to be wrapped up next year. Another missile to be used as part of the fifth-generation fighters weapons suit and fit its internal bays is the Tactical Missiles Corp.s parent companys Kh-38ME newgeneration modular multipurpose air-tosurface missile weighing up to 520 kg with a reach of up to 40 km. It is designed to wipe out a wide spectrum of armoured, hardened and exposed ground single or multiple tar-
gets and waterborne targets in the littorals. During the previous MAKS 2009 show in Zhukovsky, where the Kh-38ME missile family made its debut, it was reported that the missiles of the family could carry various guidance packages a semiactive laser homer on the Kh-38MLE, an active radar homer on the Kh-38MAE, a thermalimaging heat-seeker on the Kh-38MTE and a satnav-guided one on the Kh-38MKE cluster-type missile. The Kh-38MLE laser beam rider was displayed at MAKS 2011. According to Boris Obnosov, its development is on schedule and is expected to be completed in a couple of years. A spice of the show was the 250-kg KAB-250 smart bomb from the Region company. Owing to its compact dimensions, it can be not only mounted on the PAK FAs external weapons stations, but carried internally as well. The KAB-250 is an internalcarriage weapon designed for the PAK FA but capable of being used by other planes as well. Only the basic dimensional parameters of the advanced 250-kg bomb were offered at
www.take-off.ru
32
the show, e.g. a length of 3.2 m, a diameter of 255 mm and a wingspan of 550 m. It is too early to go into detail on the KAB-250, Mr. Obnosov said. The type of guidance used has not been unveiled yet either. When speaking about using GPS and GLONASS receivers for cuing smart bombs to their targets, however, the Tactical Missiles Director General said, There are 500-kg bombs like that, namely the KAB-500S-E, and the satnav capability has been provided for virtually all next-generation bombs in the 1,500, 500 and 250-kg class. Thus, the KAB-250 will presumably carry a combined guidance package comprising the satnav system and one of the homing heads. Other advanced and upgraded air-tosurface missiles from the Tactical Missiles Corporation, which export versions were displayed at MAKS 2011 could be also carried by PAK FA, albeit externally. For instance, they include the Kh-31PD highvelocity antiradiation missile and heavily upgraded Kh-31AD and Kh-35UE antiship missiles. All of them are made by Tactical Missiles Corp.s parent company. The Kh-31AD supersonic antiship missile, for which development the company is paying out of pocket, is in the final stages of development. It features an extended range, enhanced ECM immunity and a cutting-edge active radar homing head. Its test programme is expected to be wrapped up in 2013 or 2014. The Kh-35UEs official trials are slated for completion as soon as the end of this year. Boris Obnosov noted that the Kh-35UE development was no cakewalk because the missile, albeit a dead-ringer for the Kh-35E baseline model outwardly, is equipped with an advanced short-burn turbojet engine, a sophisticated homer and a satnav system in addition to the inertial navigation system, which has improved the weapons basic characteristics much. For instance, its maximal range has doubled from 130 km to 260 km, with an insignifiwww.take-off.ru
cant increase in its air-launched versions launch weight from 520 to 550 kg. The Kh-35UE is a versatile weapon for use, among other things, by the upgraded Uran and Bal shipborne and coastal defence missile systems. It also has been adapted for use by virtually all tactical warplanes and naval helicopters. Also displayed at MAKS 2011 were the latest members of the Kh-59ME subsonic missile family under development by the Raduga design bureau the Kh-59MK
Kh-38MLE
with the active radar homing head to kill a wide range of radio-contrast targets, Kh-59M2E with TV-command guidance and Kh-59MK2 with a combined guidance system. Depending on the version, their launch weight varies from 900 kg to 960 kg and their max range is up to 285 km (115140 km for the Kh-59M2E). According to Boris Obnosov, the launch of the Kh-59MKs production is slated for early next year. The missile of the type is designed for application by the Sukhoi
Kh-58UShKE
33
competition, Boris Obnosov reminisces about the competition during MAKS 2011. I hold products from Novator in high esteem. But it looks like the tender ended not in favour of Novators weapon. According to Mr. Obnosov, Tactical Missiles Corps work on the long-range missile is on schedule, a production-standard version has been selected, and its tests are to be finalised before year-end. The missile has been productionised for the past two year. This is a formidable weapon with nothing to rival it either in country or abroad. It flies with a swing and hits its targets, added the Director General proudly. According to the official information disseminated during the air show, the new missiles performance is far more advanced over that of the well-known long-range R-33E. It is not easy to compare the RVV-BD and R-33E, however. It is clear at first sight that they are utterly different. Presumably, the RVV-BD is likely to be a derivative of the long-range missile prototype Vympel developed in 1980 1990s to equip latest versions of the MiG-31 interceptor (for instance, at MAKS 1997, six missiles like that were seen on the underbelly hardpoints of the MiG-31M No. 057 at the static display ground). Mention should be made that the lateral dimensions of the MAKS 2011-displayed RVV-BD are unlikely to allow its internal carriage by the PAK FA. The missiles pamphlet disseminated during the show indicated that only the external AKU-410-1 and AKU-620 ejectors were to be used to attach it to and launch it. Judging by the example displayed at the show, only the vanes of the RVV-BD were foldable for conformal carriage, but the
wing remained fixed, to boot. Also, specifying the weapons designed for internal carriage, Boris Obnosov did not mention the RVV-BD. Most probably, the RVV-BD is an export version of the advanced longrange missile being developed under the programme of MiG-31 interceptor upgrade in service with the Russian Air Force (an upgraded MiG-31BM was shown at a static display during MAKS 2011). Nonetheless, the lessons learnt from the programme are certainly to be relevant to the development of a long-range missile for internal carriage on the fifth-generation fighter. The RVV-BD is taken to the target area by the inertial guidance system with radio-frequency updates and subsequent active terminal radar homing. According to adverts circulated, the RVV-BD will be able to destroy various air threats (fighters, attack aircraft, bombers, airlifters, helicopters, cruise missiles) from any aspect at long range round the clock despite heavy ECM, including multiple-channel launch-andleave capability. Owing to the missiles top-notch aerodynamics and high-performance bi-pulse solid-fuel rocket motor, its range may well be several hundred kilometres. Speaking at MAKS 2011, Boris Obnosov said the RVV-BDs export version would have a range of up to 200 km. To date, no missile in the class can boast a range like that, Mr. Obnosov concluded. The missile can eliminate threats jinking hard at 8 g at an altitude of 1525,000 m. The RVV-BDs launch weight stands at 510 kg. The weapon packs a 60-kg HE/ fragmentation warhead with proximity and impact fuses.
www.take-off.ru
34
Alexey Mikheyev
36
www.take-off.ru
Alexey Mikheyev
Marina Lystseva
Mikhail Zherdev
all of the surveillance equipment cleared by the agreement, namely four airborne photo cameras, three TV cameras, a synthetic aperture radar and an infrared linear scanner. The mission equipment
is housed behind special fuselage hatches and fairings, with operator and observer workstations in the cabin. At MAKS 2011, the Tu-214ON (serial RA-64519) was both shown
as a static display and demonstrated in flight, and the media were given an opportunity to familiarise with its airborne surveillance system equipment and the operator workstations.
warplanes of the type have been delivered, including knockdown kits for licence production in India. The Su-30MKI orderbook has swelled up to 292 aircraft and expected to hike up to 374, once the anticipated new order for 42 extra Su-30MKIs has been awarded by India and the Russian Defence Ministry has placed its order for 40 Su-30SMs.
To date, Irkut has fulfilled the contracts for 90 Su-30MKIs for India (the first deal was made in 1996, with two more in 2007), 28 Su-30MKI(A) for Algeria under the 2006 contract and 18 Su-30MKMs for Malaysia under the 2003 contract. Deliveries of Su-30MKI knockdown kits to India carry on under the contract for 140 fighters, and a new batch of Su-30MKI(A) aircraft is being prepared for shipping to
Algeria under the second contract for 16 aircraft, which was signed in 2010. The manufacturing plants Director General Alexander Veprev told the media that the company had made 38 Sukhoi aircraft and knockdown kits of the type last year. Taking into account the orderbook, the Su-30MKI production will have continued in Irkutsk until the second half of this decade at the least.
www.take-off.ru
37
Andrey Fomin
Mikhail Zherdev
Alexey Mikheyev
Take-off's archive
October through December 2010). The Budyonnovsk-based aircraft feature blue serials from 01 through 17 and the Korenovsk-stationed ones red serials from 01 through 08. In September this year, six Mi-28Ns from both units were involved in large-scale combined exercise Union Shield 2011 at the Ashuluk training range in the Astrakhan Region. To date, Rostvertol has delivered as many as almost 40 productionstandard Mi-28Ns. Recently, Russian Helicopters holding and Russian Defence Ministry have signed a new long-term contract for more helicopters of the type for the period
throughout the decade. Meeting the media this spring, Rostvertol Director General Boris Slyusar said the company would have productionised the Mi-28NM upgraded version by 2015. Probably, the derivative will mount the long-awaited radar, cutting-edge defensive aids suite and advanced weapons. The Mi-28UB fitted with twin sets of controls is being prepared for construction too. In addition, RusAF has ordered more than two dozen Mi-35M attack helicopters that have been built only for export until recently. The first Mi-35Ms earmarked for RusAF are already in trials at Rostvertol.
Rostvertol
38
www.take-off.ru
Rostvertol
Take-off's archive
to launch tourist services to Egypt, Spain, Italy, the UAE, Israel, etc. Under the contract signed by Polyot, Sberbank-Leasing and VASO plant last year, the carrier shall lease 10 An-148-100Es. They shall be in the 68-seat layout (8 seats in the business class and 60 in the economy class) but will be able to be converted quickly to the 75-seat single-class layout. Unlike the six
An-148-100Bs made in Voronezh, the Polyot-intended planes feature an extended range. The first An-148-100E (c/n 41-04, RA-61709) first flew in Voronezh in early June of this year and was delivered to Polyot on 20 July 2011. The second aircraft (c/n 41-06, RA-61710) flew for the first time on 6 July and its acceptance report was signed on 31 August 2011. In September, VASO completed another Polyot-destined plane (c/n 41-07, its registration number will be RA-61711) that performed its first flight on 4 October. According to Anatoly Karpov, the company is going to have it on services before year-end and receive the fourth aircraft from VASO in the first quarter of 2012. Meanwhile, a new An-148 operator appeared in Ukraine as well. On
3 August, Antonov handed over a new production An-148-100B built earlier this year in Kiev to the new customer, Ukraine International Airlines (UIA). The carriers aircraft fleet, which has been made up of Boeing planes only (according to UIAs official website, it comprises 19 Boeing 737s in various versions), was extended by the second production-standard An-148 built in Kiev (reg. UR-NTD, c/n 01-10). It first flew in Kiev on 13 January 2011. In September, UIA received another An-148 (reg. UR-NTA, c/n 01-01) that had been flown by the Aerosvit airline from June 2009 to August 2011. Aerosvit also operated the first production An-148 made in Kiev (c/n 01-09, reg. UR-NTC) since May 2010 till September 2011. This plane is seemed to start its operations with UIA too.
Vyacheslav Smigunov
40
www.take-off.ru
Andrew Dyubin
Alexey Borisov
CIVIL
DEFENCE
SP ACE
UAS
SECURITY
FUTURES
Superjet in Armavia
Made in September 2007, the order of two SSJ100s by Armenian airline Armavia with three more options did not turn many heads at first. By then, 110 advanced airliners had been ordered (in the form of both firm orders and options) by several air carriers, including the foreign launch customer in Italy. A considerable discount to the list price was offered to Armavia, as it was offered to other early customers. Besides, Armavia ordered the configuration close to the baseline one, i.e. lacking expensive trimmings. The planes were leased through Russian company VTBLeasing. Under the contract, the first aircraft was to be delivered as far back as late 2008, but the delivery slipped by far just like the
delivery to Aeroflot did. Some of the orders considered to be firm were put on the back burner or cancelled altogether, as the SSJ programme was slipping further behind schedule. Suddenly, Armavia, along with Aeroflot, found itself the launch customer, probably, to its own surprise. The first production SSJ100-95B (c/n 95007) first flew on 4 November 2010 and then underwent the certification check test programme held for the first time as part of certification by the Interstate Aviation Committees Aircraft Registry. During the tests, a production-standard aircraft had to log at least 150 flight hours on standard routes. The Superjet certification check tests commenced in December 2010, following
Aircraft 95007 ferry flight from Komsomolskon-Amur to Zhukovsky in the Moscow Region. With the tests completed, the plane returned to Komsomolsk-on-Amur, where it was subjected to final improvements before its delivery. Participation in a long-term certification check test programme, which lasted for almost two months, came as a very useful breaking-in to the advanced plane. It allowed the troubleshooting of the most obvious teething troubles inherent to the first production aircraft and benefited the beginning of its operation further down the road. On 19 April 2011, the aircraft flew from the manufacturers airfield in Komsomolskon-Amur to the customers base airport, Zvartnots in the city of Yerevan. In Armenia, the SSJ100 registered as EK-95015 and named Yuri Gagarin was given the red-carpet treatment. The first commercial flight of the new aircraft took place as soon as the next day after its delivery, 21 April. In the very beginning of its operation, it was clear that the carrier was not going to go easy on its first Superjet 100 just because it was a new plane. The aircraft had conducted services to seven
www.take-off.ru
42
The first production Sukhoi Superjet 100 (c/n 95007) started its commercial operations with Armavia airline as EK-95015 on 21 April 2011
aircports in five nations (Moscow, Aleppo, Athens, Donetsk, Odessa, Simferopol and Tehran), which became a mini-pattern of its subsequent operation, during which it flies to Russia, Ukraine, other European countries and the Middle East. The SSJ100s hour of triumph in service with Armavia came in mid-June when the airline decommissioned as many as two A320s. Coupled with the seasonal hike in the number of the carriers flights, this stepped up the operational tempo for its remaining aircraft up to an average of two return flights a day. Many remote European destinations, which had been handled by the airbuses before that, fell on the SSJ100. As a result, 45-hour flights to Europe out to 2,5003,500 km became a routine, virtually daily job to the plane. The services to Amsterdam, Barcelona, Lyon, Marseille, Rome, Venice and Zurich became the Armenian Superjets standard routes. The advanced Russian-built airliners first three months in the commercial operation by Armavia were very fruitful. The diversified route network enabled the plane to be tested not only on short regional services, but on long ones as well. The Superjet flew to 20 airports. It mastered its European lines that proved the range stated by the manufacturer. The aircraft also proved its ability to operate in the adverse climatic conditions of Armenias
www.take-off.ru
hot mountainous terrain. The aircraft logged 200-plus flight hours as soon as its third month of operation, which is good for a new aircraft in the class. In October, the Armenian Superjet flew from Yerevan to Moscows Vnukovo and Domodedovo, to Samara, Ufa, Tbilisi and over 10 cities in the far abroad Amsterdam, Athens, Berlin, Lyon, Marseille, Venice, Aleppo, Beirut, Dubai, Tehran and Tel Aviv. It had conducted more than 450 operations with a total of 1,100 flight hours by early
November. In the first six months of its operation, its average monthly flying time has accounted for about 180 flying hours (the maximal flying time 205 hours was logged in July 2011) with an average flight slightly exceeding 2.5 h and an average daily flying time being slightly less than 6 h (an average of five services are flown every two days). Armavias SSJ100 did not fly only five days in October, which indicates a rather high degree of operability and reliability of the carriers only aircraft of the type. The second Superjet
Armavias SSJ100 passenger cabin interior
Andrey Fomin
43
and Aeroflot
The Russian flag carrier, Aeroflot, got the first of the 30 SSJ100s, ordered in December 2005, in mid-June 2011. New regional jet with c/n 95008 and registration number RA-89001 named after Mikhail Vodopyanov conducted its first commercial service from Moscow to St. Petersburg on 16 June and then launched operations to Nizhny Novgorod, Yekaterinburg and then Ufa. Unlike the first production SSJ100, which was delivered to Armavia and had been debugged during its 150-hour certification check tests, despite the fact that Aeroflots first SSJ100 did not get to the customer soon after its maiden flight on 30 January 2011, it had completed only a limited number of acceptance tests. Possibly, this was a reason for the carrier having to ground its new plane several times in the initial stages of operation to fix problems. For instance, following an aggressive start in June (46 flights performed during the first 12 days, with almost 80 flight hours logged), RA-89001 flew only for 14 days in July. Nevertheless, it has no longer encountered considerable technical problems since later July, which has enabled it to fly up to eight services a day without any delays worth mentioning. The intensity of operation of the new-type aircraft by Aeroflot increased further in the wake of the delivery of its second Superjet late in August. The aircraft with c/n 95010
The first Aeroflots Sukhoi Superjet 100 (c/n 95008, RA-89001) entered regular services on 16 June 2011
ing time per plane in Aeroflot stands at a bit less than 6 h (on the average, each of the aircraft flies four operations a day). The first SSJ100s average monthly flying time has accounted for about 180 flying hours over the four months in service, and the second airliners average flying time during the first two months of its scheduled operations equalled about 210 h (the average monthly flying time per two-aircraft fleet is slightly less than 200 h per plane).
44
www.take-off.ru
The third Aeroflot-ordered airliner (c/n 95011) made its maiden flight in Komsomolsk-on-Amur on 11 September. As with the second airliner, it was painted in Ulyanovsk. RA-89003s delivery and operational debut was slated for later October. Aeroflot will have been able to receive several more Superjets before year-end. In October, there were seven more Aeroflot-destined aircraft in final assembly, with four of them
(c/n 95012, 95015, 95013, 95016) earmarked for delivery before the end of the year. The fuselage of the 13th production aircraft (c/n 95019) was brought to SCACs final assembly shop in Komsomolsk-on-Amur on 1 October. SCAC is making efforts to step up the output rate hampered so far by delayed deliveries of production-standard SaM146 engines. In September, Igor Vinogradov, SCAC first vicepresident for development and certification, said that extra jobs would be created in the final assembly shop, which would allow 10 aircraft to be assembled there instead of six. In addition, aircraft components will be brought to the
www.take-off.ru
shop pre-assembled, part of wing panel assembly will be handled by KAPO plant in Kazan while the assembly of the cabin interior will be carried out in Ulyanovsk starting with the ninth production aircraft (c/n 95015). Owing to the measures being taken, 28 SSJ100 planes are planned for production next year, Igor Vinogradov said. Along with the continued Superjet deliveries to Aeroflot and Armavia in 2012, SCAC and the Superjet International joint venture plan to start deliveries to new customers that might include Russian carriers Yakutiya and UTair and the SSJ100s first foreign operators from Mexico, Indonesia, Laos, etc
take-off november 2011
45
The first Il-76MF (c/n 96-02), designed for Jordan and issued side number 76954 for the duration of the trials, conducted its maiden flight in Tashkent on 30 September 2010 and was ferried to Zhukovsky a month later for remaining equipment to be fitted and special flight trials conducted. The other aircraft (c/n
94-01, side number 76953) first flew on 12 May this year and moved to the airfield of the Gromov Flight Research Institute on 31 May. Painted in the colours of the customer and given the insignia of Jordan carriers Royal Falcon and JIAC, the planes were issued their registration numbers JY-JID and
JY-JIC. Their tests were completed during the spring and early summer, and their flying and ground crews were trained on them in Zhukovsky. Finally, the Il-76MF (76953 or JY-JIC) departed from Gromov LIIs airfield for Jordan on 29 June, followed by the other Il-76MF (76954 or JY-JID) on the next day.
Andrey Fomin
46
www.take-off.ru
Sergey Lysenko
be supplied to MiGs Production Complex 2. Here, the rest fuselage assemblies, including the basic loadbearing element the central fuel tank, are made and the fuselage is assembled to be then sent to MiGs Production Complex 1 in the town of Lukhovitsy out of Moscow, which manufactures the wings, empennage and composite structural elements and performs the final assembly and tests of the planes. In addition to the work under the MiG-29K/KUB programme, MiG is fulfilling another major order placed by the Indian Defence Ministry, the one for upgrading 62 MiG-29 fighters in service with IAF. The first four aircraft are being upgraded by MiG Corp. while the two MiG-29UBs by Sokol plant. Initial MiG-29UPG made its maiden flight after upgrade
on 4 February 2011 to be followed by the second one and the first MiG-29UPG-UM in May. Two more IAF singleseaters were upgraded at MiGs Production Complex 1 this summer and the second twinseater at Sokols facility in Nizhny Novgorod. The remaining 56 aircraft will be upgraded in India using parts and units supplied by Russia. An IAF pilot flew the first upgraded MiG-29UPG-UB fighter in Zhukovsky on 7 October. The sortie lasted for an hour and a half and was smooth. The Indian pilot appreciated the new capabilities of the upgraded aircraft. On the same day, two MiG-29UPG singleseaters upgraded by MiG Corp. flew from Zhukovsky to the airfield of the Russian Defence Ministry State Flight Test Centre in Akhtubinsk for continued tactical trials.
Another contract being fulfilled by MiGs Moscow-based facility is the construction of MiG-29 fighters for the Republic of Myanmar. According to MiGs Production Complex 2 Director Vyacheslav Artemyev, the first three aircraft were delivered this spring and three more were flight-tested in Lukhovitsy in August, after which they were headed for Myanmar too. The plant is assembling a next batch of MIG-29s for the Myanmarese. The line production method is used for assembly, ensuring higher effectiveness and quicker work. The production line set up in Production Complex 2 comprises six stations where fuselages are beefed up consecutively with the rest of structural components and systems. Recurring to the MiG-29K/KUB carrierborne fighters, mention should be made that MiG expects the Russian government to award an order in the near future for a batch of aircraft like that for the Russian Defence Ministry. The aircraft are to be fielded with the independent carrierborne fighter regiment of the Russian Navys Northern Fleet. Talks also are under way on MiG-35 fighters for the Russian Air Force. Besides, MiGs Engineering Centre Director Vladimir Barkovsky said in August that the first MiG-29M/M2 multirole fighter prototypes were to be completed by year-end, with the fighters being manufactured under a contract with foreign customer. They will be heavily commonised with the production-standard MiG-29K/KUB carrierborne fighters in terms of design, avionic and weapons.
Andrey Fomin
www.take-off.ru
47
Andrey Fomin
The air groups of the Mistralclass amphibious assault ships in the Russian Navys inventory will comprise Kamov Ka-52K, Ka-29 and Ka-27PS helicopters. Each of
the ships is expected to accommodate up to eight Ka-52K multirole combat helicopters as well as up to eight Ka-29 combat transport and Ka-27PS search-andrescue helicopters. Both types of the helicopters have been tested for Mistral basing feasibility during a Mistrals visit to Russia in November 2009. The height of the deck near the elevators on the Mistrals designed for the Russian Navy will be increased a little to ensure safe basing of the Ka-29 and Ka-27PS on the hangar deck. No structural modifications are required for the Ka-52K shipborne version under development by Kamov to be based there. A model of the Ka-52K was unveiled in late June at the IMDS 2011 in St. Petersburg. The navalised version will differ from the Ka-52 baseline model entering service with the Russian Air Force mostly in the folding main rotor blades and folding stub wing panels.
Victor Drushlyakov
48
www.take-off.ru
Alexey Mikheyev