You are on page 1of 2

SOLENOID VALVES

pilot operated for hot water/steam applications 3/8 to 1 1/2


FEATURES
Reliable control in low pressure, high ow systems Valves do not require a minimum operating pressure The solenoid valves are constructed packless with a one-piece deepdrawn stainless steel core tube, ensuring safe operation of electrical and wetted moving parts The valves have forged brass bodies, compact design, to minimize heat radiation loss Hung diaphragm construction The solenoid valves satisfy all relevant EC Directives
OUT

NC
IN

2/2 222

Series

GENERAL
Differential pressure Response time
uids () hot water, steam

See SPECIFICATIONS [1 bar =100 kPa] 15 - 60 ms


temperature range (TS) - 20C to + 130/150C seal materials () EPDM (ethylene-propylene)

MATERIALS IN CONTACT WITH FLUID


() Ensure that the compatibility of the uids in contact with the materials is veried Body Brass Core tube Stainless steel Core and plugnut Stainless steel Springs Stainless steel Seat Brass Seal, diaphragm & disc EPDM Shading coil Copper

ELECTRICAL CHARACTERISTICS
Coil insulation class Connector Connector specication Electrical safety Electrical enclosure protection Standard voltages (Other voltages and 60 Hz on request)
prex option SC
(1)

F Spade plug (cable 6-10 mm) ISO 4400 / EN 175301-803, form A IEC 335 Moulded IP65 (EN 60529) DC (=) : 24V - 48V AC (~) : 24V - 48V - 115V - 230V / 50 Hz
operator ambient temperature range (TS) (C) -20 to + 40 -20 to + 40 replacement coil ~ = 230 V/50 Hz 24 V DC 400425-117 400525-117 400625-142 type (1) 01 02

inrush ~ (VA) 55 110

power ratings holding hot/cold ~ = (VA) (W) (W) 23 10,5 33,6 15,4 12/16,8

IN

OUT

Refer to the dimensional drawings on the following page.

SPECIFICATIONS
00101GB-2011/R01 Availability, design and specications are subject to change without notice. All rights reserved.

pipe size Rp 3/8 1/2 3/4 1 1 1/4 1 1/2


(2)

orice size (mm) 16 16 19 25 28 32

ow coefcient Kv (m3/h) (l/min) 2,6 3,5 4,3 11,1 12,8 19,3 43,3 58,3 71,1 185 213,3 321,6

operating pressure differential (bar) min. max. (PS) steam () water () (2) ~ = ~ = 3,5 3,5 3,5 2 2 2 3,5 3,5 3,5 9 9 9 -

max. uid temp. (C) ~ 150 150 150 130 130 130 = 150 150 150 130 130 130

power coil (W) ~ =

catalogue number

NC - Normally closed
0 0 0 0 0 0 10,5 16,8 10,5 16,8 10,5 16,8 15,4 15,4 15,4 SCE222B093 SCE222B094 SCE222B095 SCE222B154 SCE222B155 SCE222B156

Water temperature should not exceed 100C.

All leaets are available on: www.asconumatics.eu V901-15-1

SOLENOID VALVES SERIES 222


OPTIONS
Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE-10 Electrical enclosures according to NEMA standards are available Compliance with UL, CSA and other local approvals available on request Mounting brackets (3/8, 1/2 and 3/4 only), sufx MB Other pipe connections are available on request Plug with visual indication and peak voltage suppression or with cable length of 2 m (see Solenoids, Coils & Accessories section)

INSTALLATION
The solenoid valves can be mounted in any position without affecting operation Pipe connection identier is E = Rp (ISO 7/1) Installation/maintenance instructions are included with each valve

SPARE PARTS KIT & ACCESSORIES


catalogue number SCE222B093/094 SCE222B095 SCE222B154/155 SCE222B156
- Not available.

ORDERING EXAMPLES:
mounting bracket no. 038713-000 038713-000 SC SC SC SC prex pipe thread basic number E E E E 222 B 093 222 B 154 222 B 094 222 B 155 230V / 50 Hz 115V / 50 Hz 24V / DC 230V / 50 Hz

spare parts kit no. ~ = C304031 C132654 C123858 C132655 C133839 C133840 -

voltage sufx

ORDERING EXAMPLES KITS:


C304031 C132654 basic number sufx

DIMENSIONS (mm), WEIGHT (kg) TYPE 01-02


Prex SC Solenoid Epoxy moulded IEC 335 / ISO 4400 IP65 Type 01 (AC) : SCE222B093/094/095 Type 02 (DC) : SCE222B093/094/095 (AC) :SCE222B154/155/156

A B C

360

J K

7,1 17,5 Mounting brackets for valves: SCE222B093 SCE222B094 SCE222B095

IN E

OUT H

21 42

type 01

prex option SC

catalogue number SCE222B093/094 SCE222B095 SCE222B093/094 SCE222B095 SCE222B154 SCE222B155 SCE222B156

A 80 80 86 86 86 86 86

B 50 50 56 56 56 56 56

C 30 30 33 33 33 33 33

E 70 71 70 71 95 95 111

F 45 45 50 50 50 50 50

weight 1,2 1,3 1,4 1,5 2,0 2,0 2,6

(1)

02

SC

58 84 96 113 58 87 104 121 58 91 103 105 58 94 111 113 83 110,5 131 132 83 117 141,5 142,5 99 122,5 151 152

(1)

including coil and connector.

All leaets are available on: www.asconumatics.eu V901-15-2

00101GB-2008/R01 Availability, design and specications are subject to change without notice. All rights reserved.

You might also like