You are on page 1of 1

OMT The OMT port is used to communicate with the Operation and Maintenance Terminal.

The OMT is connected through a 9-pin D-sub female connector. The OMT connection is galvanically separated. All signals use RS 232 levels. Table 6 The OMT Connector Pins and their Functions

Pin 1 2 3 4 5 6 7 8 9

Table 6 Name DCD RXD TXD DTR SG DSR RTS CTS NC

The OMT Connector Pins and their Functions Function Connected internally to DTR and DSR Receive data Pin 6 RJ45 Transmit data Pin 3 RJ45 Connected internally to DCD and DSR Earth ground Pin 4,5 RJ45 Connected internally to DTR and DCD Connected internally to CTS Connected internally to RTS No connection

DB9 to RJ45 serial DTE adapter wiring

RJ45 DB9 3 2 2 3 1 5

You might also like