You are on page 1of 20

Mild Steel490MPa High Tensile Strength Steel 570~950MPa High Tensile Strength Steel Low Temperature Service Steel

Heat Resisting Steel Boiler Tube/Pipe Atmospheric Corrosion Resisting Steel Sulphuric Acid Corrosion Resisting Steel Sea Water Corrosion Resisting Steel Stainless Steel Special Alloy SurfacingCast Iron Electroslag Welding Materials Electrogas Welding Materials NITTETSU High Efficiency Welding Process Welding Machine and Equipment Approval List of Welding Materials

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Head Office :

Tsukiji-KY Bldg., 4-7-5 Tsukiji, Chuo-ku, Tokyo 104-0045 Tel: +81-3-3524-3400 Fax: +81-3-3524-3401 E-mail: overseas@nsswelding.co.jp 6-1, 7-chome, Higashi Narashino Narashino City, Chiba Pref,. 275-0001 Tel: 0474-79-1171 Fax: 0474-75-6430 2-1, 4-chome, Asae, Hikari City, Yamaguchi Pref., 743-0021 Tel: 0833-71-3390 Fax: 0833-71-3394 7-1, Shin-Toyohuta, Kashiwa City, Chiba Pref., 277-0804 Tel: 04-7131-3231 Fax: 04-7131-3903

Narashino Plant :

Hikari Plant :

Kashiwa Plant :

Welding Machinery & 6-1, 7-chome, Higashi Narashino Narashino City, Chiba Pref,. 275-0001 Optical Fiber Div. : Tel: 0474-79-4111 Fax: 0474-75-1434 Laboratory : In Joining Research Laboratory, Steel Reseach Laboratories Technical Development Bureau Nippon Steel Corporation 20-1, Shintomi, Futtsu City, Chiba Pref., 293-0011 Tel: 0439-80-2621~2 Fax: 0439-80-2748

Korea Branch Office : B-402, E-Starbill, 323-9 Shin-jung dong, Yang-chun gu, Seoul, Korea 158-070 C.P.O Box 6030 Tel: +82-2-2648-6578 Fax: +82-2-2648-6579

n Please note the following points in the use of this catalog. 1. Classification numbers either by JIS (Japanese Industrial Standards) or AWS (American Welding Society) are given to the products except for some types which are classified into neither of them. There are three different ways in which the classification numbers are given depending on the extent that the products meet the classifications. (1) The classification number without an mark; (i.e. JIS Z 3211 D4301) It means that the product meets the classification requirements and that JIS Mark is usable on the product based on the JIS mark system. (2) The classification number with the mark ; (i.e. JIS Z 3214 DA5003A, AWS 5.1 E7016) It means that the product meets the classification requirements but that the JIS Mark system is not applicable to the classification. (3) The classification number with the mark ; (i.e. JIS Z3312 YGW17, AWS A5.1 E7016) It means that the product meets most of the classification requirements. However, there is for example a partial deviation in chemical composition. 2. The definition of the Weld Metal described in this catalog is a weld metal which has not been diluted by base metal except in the case of SAW. 3. Besides the products listed in this catalog, we will make every effort to manufacture welding consumables and/or machinery tailored to customers' requirements. 4. The status of our ship approvals may change from time to time. Your kind confirmation for up-to-date information will be appreciated. 5. The specifications of the products included in this catalog are subject to change without prior notice.

INDEX
1) Mild Steel490MPa High Tensile Strength Steel
Welding method Brand Name NITTETSU SF-1 NITTETSU SF-3 NITTETSU SF-1A Flux Cord Arc Welding Wires Specification JIS Z 3313 T49J0T1-1CA-UH5 AWS A5.20 E71T-1C Z 3313 T492T1-1CA-N1-UH5 A5.20 E71T-12C Z 3313 T49J0T1-1MA-UH5 A5.20 E71T-1M Z 3313 T492T1-1MA-UH5 Z 3313 T49J0T15-0CA-H5 Z 3313 T49J0T1-0CA-UH5 Z 3313 T49J0T1-CA-U Z 3313 T49J0T1-0CA-U Z 3313 T49J0T1-0CA-UH5 Z 3211 E4916U Z 3211 E4948 Z 3211 E5716U Z 3211 E4303U Z 3211 E4303U Z 3211 E4319U Z 3211 E4319 Z 3211 E4319 Z 3211 E4316 Page 22 23 24 25 26 27 28 29 30 30 32 33 34 36 36 36 36 36 36 38 38 38 38 38 40 40 40 40 40 42 43 43 44 44 44 44 44 44 44 46 46 46 46

NITTETSU SF-3A NITTETSU SM-1 NITTETSU SM-1F

NITTETSU FC-1 NITTETSU FCM-1F NITTETSU SM-1S NITTETSU SM-1A NITTETSU L-55 NITTETSU TW-50 NITTETSU L-53

A5.20 E71T-12M A5.20 E70T-1C A5.20 E70T-1C A5.20 E71T-1C A5.20 E70T-1C A5.20 E70T-1C

NITTETSU-03 NITTETSU NS-03Hi S-03Z NITTETSU G-200 NITTETSU A-200 NITTETSU G-300

A5.20 E70T-1M A5.1 E7016 A5.1 E7048 A5.1 E7016 A5.1 E6013 A5.1 E6013 A5.1 E6013 A5.1 E6019 A5.1 E6019 A5.1 E6019

Covered Arc Welding Electrodes

NITTETSU FI-120G NITTETSU L-43LH NITTETSU-16 NITTETSU-16W

NITTETSU-16V EX-55 NITTETSU-16LH

Z 3211 E4316U Z 3211 E4316 Z 3211 E4916U Z 3211 E4916

A5.1 E6027

EX-50F NITTETSU M-50G NITTETSU LM-55G

NITTETSU YF-15BYDM3 NITTETSU YF-15Y-D NITTETSU YF-15Y-CM NITTETSU NF-45Y-B NITTETSU NF-45Y-D NITTETSU YF-800Y-D NITTETSU YF-800SY-D NITTETSU NF-60Y-DS NITTETSU NF-80Y-DS NITTETSU YF-15AY-D NITTETSU NF-11HY-D NITTETSU NF-1Y-D NITTETSU NF-100Y-DS

Z 3211 E4940-G Z 3211 E4940-G

A5.1 E7016 A5.5 E7016-G A5.1 E7048 A5.1 E7016 A5.1 E7016 A5.1 E7024 A5.1 E7024 A5.1 E7028

A5.23 F7A4-EG-G F7P4-EG-G A5.17 F7A4-EH14 F7P4-EH14

A5.23 F8A2-EG-A3 F7P2-EG-A3 A5.17 F6A2-EM12 A5.17 F7A0-EH14 A5.17 F7A0-EH14 A5.17 F7A0-EH14

Submerged Arc Welding Materials

A5.17 F7A0-EH14 A5.17 F7A4-EH14 F6P4-EH14 A5.17 F7A4-EH14 A5.17 F7A4-EH14 A5.17 F7A4-EH14 F7P4-EH14 A5.17 F7A6-EH14 F7P6-EH14 A5.23 F8A4-EG-G F8P2-EG-G

NITTETSU NF-1Y-E

Welding method

Brand Name NITTETSU NSH-53ZYDL NITTETSU YF-38Y-D NITTETSU NF-80Y-CMS NITTETSU NF-1Y-DM3 NITTETSU YM-26 NITTETSU YM-28 NITTETSU YM-28Z

Specification JIS Z 3312 YGW11 Z 3312 YGW12 Z 3312 G49A0C0 AWS A5.17 F7A0-EH14 A5.23 F72A-EG-A2 F7P2-EG-A2 A5.23 F8A4-EG-G F8P2-EG-G A5.18 ER70S-G A5.18 ER70S-G A5.18 ER70S-3 A5.18 ER70S-G A5.18 ER70S-3 A5.18 ER70S-3 A5.18 ER70S-G A5.18 ER70S-G

Page 46 46 46 48 50 51 52 54 54 54 54 54 54 56 56

Submerged Arc Welding Materials

Gas Metal Arc Welding Wires

NITTETSU YM-SCM NITTETSU YM-28S NITTETSU YM-25 NITTETSU YM-24S NITTETSU YM-22Z NITTETSU YM-25S

Z 3312 G49A0C16 Z 3312 YGW15 Z 3312 YGW16 Z 3312 G43A2M0 Z 3312 YGW16

Gas Tungsten Arc NITTETSU YT-28 Welding Wires NITTETSU YT-28S

2) 570~950MPa High Tensile Strength Steel


Welding method Flux Cord Arc Welding Wires Brand Name NITTETSU SF-60 NITTETSU L-60 NITTETSU L-62CF Specification JIS Z 3313 T59J1T1-1CAN2M1-UH5 Z 3211 E5916-N1M1U Z 3211 E6216-N1M1 AWS A5.29 E81T1-G A5.5 E8016-G A5.5 E9016-G A5.5 E9016-G A5.5 E11016-G A5.5 E11016-G Page 60 62 63 64 65 66 68 68 68 68 68 70 72 73 74 75 76 77 78 80 80 80

Covered Arc Welding Electrodes

NITTETSU L-60LT NITTETSU L-80 NITTETSU L-80SN NITTETSU L-60S NITTETSU L-60W

Z 3211 E6216-G Z 3211 E7816-N5CM3U Z 3211 E7816-N9M3U Z 3211 E5916-N1M1

NITTETSU L-62 NITTETSU L-70 NITTETSU L-80EL

NITTETSU L-100EL NITTETSU YF-15BY-DM NITTETSU NF-820Y-DM NITTETSU NB-250HY204B NITTETSU NF-11HY-E Submerged Arc Welding Materials NITTETSU NB-60LYDM3 NITTETSU NB-250HY80M NITTETSU NB-80Y-80 NITTETSU NF-100YCMS NITTETSU NF-100YDMS NITTETSU NF-250Y204B

Z 3211 E6216-G Z 3211 E6916-N4M3U

A5.5 E8016-G A5.5 E8016-G A5.5 E9016-G A5.5 E10016-G A5.5 E11016-G A5.23 F9A6-EA3-A3 F8P2-EA3-A3 A5.23 F8A0-EA3-A3 A5.23 F9A8-EG-G A5.23 F8A4-EG-G A5.23 F8A8-EG-G F8P8-EG-G A5.23 F11A10-EG-M3 A5.23 F11A4-EG-G A5.23 F8A6-EG-A4 F8P6-EG-A4 A5.23 F9A2-EA3-A3 F9P2-EA3-A3 A5.23 F9A6-EG-G F8P6-EG-G

Welding method

Brand Name NITTETSU YF-15BY70M NITTETSU NB-250HY70M NITTETSU YF-15BY80M NITTETSU YM-60C NITTETSU YM-60A NITTETSU YM-80C NITTETSU YM-80A NITTETSU YM-60CS NITTETSU YM-60AS NITTETSU YM-70C NITTETSU YM-70CS NITTETSU YM-70A NITTETSU YM-80AS

Specification JIS Z 3312 G59JA1UC3M1T Z 3312 G59JA1UM3M1T AWS A5.23 F10A4-EG-G A5.23 F10A8-EG-G F10PB-EG-G A5.23 F11A2-EG-M3 A5.28 ER80S-G A5.28 ER80S-G A5.28 ER110S-G A5.28 ER110S-G A5.28 ER90S-G A5.28 ER90S-G

Page 80 80 80 82 83 84 85 86 86 86 86 86 86 88 88 88

Submerged Arc Welding Materials

Gas Metal Arc Welding Wires

Z 3312 G78A2UCN5M3T Z 3312 G78A4UMN5C1M3T Z 3312 G59JA1UC3M1T Z 3312 G59JA1UM3M1T Z 3312 G69A2UCN4M3T Z 3312 G69A2UCN1M2T

Gas Tungsten Arc Welding Wires

NITTETSU YT-60 NITTETSU YT-70S NITTETSU YT-80S

Z 3312 G69A3UMN4M3T Z 3312 G78JA2UMN6CM3T

A5.28 ER100S-G A5.28 ER100S-G A5.28 ER100S-G A5.28 ER110S-G A5.28 ER80S-G A5.28 ER100S-G A5.28 ER110S-G

3) Low Temperature Service Steel


Welding method Brand Name NITTETSU SF-36E Flux Cord Arc Welding Wires Specification JIS AWS Z 3313 T496T1-1CA-N3-H5 A5.29 E81T1-Ni2 A5.20 E70T-1J A5.29 E81T1-G Z 3313 T494T1-1MA-N1-UH5 A5.29 E81T1-Ni1M A5.5 E7016-G A5.5 E7016-C2L A5.1 E7016 A5.5 E8016-G A5.5 E8016-G A5.5 E8016-C1 A5.5 E8016-C2 Page 92 93 94 96

NITTETSU SF-36F NITTETSU SF-3AM NITTETSU SF-36EA NITTETSU L-55SN NITTETSU N-13NM NITTETSU L-55S

Covered Arc Welding Electrodes

NITTETSU N-5F NITTETSU N-11

98 99 100 100 100 100 100 100 100 102 103 103 104 105 106 107 108

NITTETSU N-11V NITTETSU N-12 NITTETSU N-13 NITTETSU N-16 NITTETSU NB-55Y-DS NITTETSU NB-55LY-C NITTETSU NB-55LY-D

Submerged Arc Welding Materials

NITTETSU NB-55EY-D NITTETSU NB-55EYDM3 NITTETSU NB-60LYDM3

A5.5 E8016-G A5.17 F7A8-EH14 F7P8-EH14 A5.23 F8A8-EG-G F8P8-EG-G A5.23 F8A8-EG-G F8P8-EG-G A5.17 F7A8-EH14 A5.23 F8A4-EG-G A5.23 F8A8-EG-G F8P8-EG-G A5.23 F7A10-EG-Ni3 A5.23 F8A8-EG-G F8P4-EG-G

NITTETSU NB-55LSY3NI

NITTETSU NF-310Y-E

Welding method

Brand Name NITTETSU NF-310YDM3 NITTETSU NB-55EY-CM NITTETSU NB-55Y-CMS NITTETSU NB-55Y-DM NITTETSU NB-3NLT-3N NITTETSU YM-28E NITTETSU YM-55H NITTETSU YM-36E NITTETSU YM-1N NITTETSU YM-3N NITTETSU YT-28E

Specification JIS Z 3312 G49AP3UM12 AWS A5.23 F8A8-EG-G F8P4-EG-G A5.23 F8A8-EG-A4 F8P8-EG-A4 A5.23 F8A8-EA3-G A5.23 F7P15-ECNi3-Ni3 A5.18 ER70S-G A5.28 ER80S-G A5.18 ER70S-G A5.28 ER80S-G A5.28 ER80S-G A5.18 ER70S-G

Page 108 108 108 108 108 110 110 110 110 110 112

Submerged Arc Welding Materials

Gas Metal Arc Welding Wires Gas Tungsten Arc Welding Wires

Z 3312 G55AP4C0 Z 3312 G49AP6M17 Z 3312 G57AP6MN2M1T Z 3312 G49AP6UMN7

4) Heat Resisting Steel


Welding method Brand Name NITTETSU N-0S NITTETSU N-1S Specification JIS AWS A5.5 E7016-A1 A5.5 E8016-B2 A5.5 E9016-B3 A5.5 E8016-B2 A5.5 E9016-B3 A5.5 E9016-B3 A5.5 E9016-G A5.5 E8016-B6 A5.5 E8016-B6 A5.5 E9016-G Page 116 117

NITTETSU N-2S NITTETSU CM-1A Covered Arc Welding Electrodes

NITTETSU N-2SM NITTETSU CM-2A NITTETSU N-2SV NITTETSU N-3SV NITTETSU N-55 NITTETSU N-5S NITTETSU N-3

118 120 120 120 120 120 120 120 120 120 120 122 123 124 125 126 126 126 128 128 128 128 128 130 130 130 130 130

NITTETSU N-P31 NITTETSU N-P32 NITTETSU NF-250Y-511 NITTETSU NB-250MY521H NITTETSU NB2CMY-521 NITTETSU NF-1Y-DM NITTETSU NB1CMY-511 NITTETSU NB-56Y-CMS NITTETSU YM-505 Gas Metal Arc Welding Wires NITTETSU YM-511 NITTETSU YM-511A NITTETSU YM-521

A5.5 E9016-G A5.5 E9016-G A5.23 F9P4-EG-B2 A5.23 F9P2-EG-B3 A5.23 F9P2-EB3-B3 A5.23 F9P6-EG-G A5.23 F9A2-EA3-A3 F9P0-EA3-A3 A5.23 F9P2-EB2-B2 A5.23 F9P6-EG-G A5.28 ER80S-G A5.28 ER80S-G A5.28 ER80S-G A5.28 ER90S-G A5.28 ER90S-G A5.28 ER80S-G A5.28 ER80S-G A5.28 ER80S-G A5.28 ER90S-G A5.28 ER90S-G

Submerged Arc Welding Materials

NITTETSU NF-250Y-204

NITTETSU YM-521A NITTETSU YT-505 Gas Tungsten Arc Welding Wires NITTETSU YT-511 NITTETSU YT-511S NITTETSU YT-521

NITTETSU YT-521S

5) Boiler Tube/Pipe Steel


Welding method Brand Name NITTETSU N-0S Covered Arc Welding Electrodes NITTETSU N-1S NITTETSU N-2S Specification JIS AWS A5.5 E7016-A1 A5.5 E8016-B2 A5.5 E9016-B3 Page 134 134 134 134 134 134 136 136 136 136 136

NITTETSU N-HCM2S NITTETSU N-9S NITTETSU N-HCM12A

Gas Tungsten Arc Welding Wires

NITTETSU YT-HCM2S NITTETSU YT-9ST NITTETSU YT-HCM12A NITTETSU YT-304H NITTETSU YT-HR3C

6) Atmospheric Corrosion Resisting Steel


Welding method Flux Cord Arc Welding Wires Brand Name NITTETSU SF-50W Specification JIS AWS Page 140 141 142 142 142 142 142 142 142 144 144 144 144 144 146 146 146 146 146

NITTETSU SF-60W NITTETSU CT-03Cr

Covered Arc Welding Electrodes

NITTETSU CT-16Cr NITTETSU CT-16VCr NITTETSU CT-26MCr NITTETSU CT-26GCr NITTETSU CT-60Cr NITTETSU CT-60GCr NITTETSU NF-820 Y-CNCW NITTETSU YF-15B Y-CNCW NITTETSU NF-310 Y-CNCW NITTETSU NF-820 Y-60W NITTETSU YF-15B Y-60W NITTETSU YM-55W NITTETSU YM-60W NITTETSU FGC-55

A5.5 E7016-G A5.5 E7016-G

A5.1 E7028 A5.5 E8016-G A5.5 E8018-W A5.23 F7A0-EG-G A5.23 F7A4-EG-G A5.23 F7A4-EG-G A5.23 F8A0-EG-G A5.23 F8A2-EG-G A5.28 ER80S-G A5.28 ER70S-G A5.28 EG80S-G

Submerged Arc Welding Materials

Gas Metal Arc Welding Wires

NITTETSU YM-W4 Gas Tungsten Arc NITTETSU YT-W4 Welding Wires

7) Sulphuric Acid Corrosion Resisting Steel


Welding method Flux Cord Arc Welding Wires Covered Arc Welding Electrodes Gas Metal Arc Welding Wires Brand Name NITTETSU SF-1ST NITTETSU FC-23ST NITTETSU ST-16M NITTETSU ST-03Cr NITTETSU ST-16Cr Specification JIS AWS Page 150 151 152 154 154 154 154 156 156 156

NITTETSU YM-W4 Gas Tungsten Arc NITTETSU YT-W4 Welding Wires

NITTETSU ST-03CrA NITTETSU ST-16CrA NITTETSU FGC-55

A5.1 E7016 A5.5 E7016-G A5.5 E7016-G A5.28 ER80S-G

8) Sea Water Corrosion Resisting Steel


Welding method Flux Cord Arc Welding Wires Covered Arc Welding Electrodes Submerged Arc Welding Materials Gas Metal Arc Welding Wires Brand Name NITTETSU SF-55RS NITTETSU RS-55 NITTETSU RS-55G NITTETSU NF-100 Y-CR4B NITTETSU YM-W4 Specification JIS AWS A5.5 E8016-G A5.5 E8016-G A5.23 F7A2-EG-G Page 160 162 162 162 162 164 164

Gas Tungsten Arc NITTETSU YT-55RS Welding Wires NITTETSU YT-W4

9) Stainless Steel
Welding method Brand Name NITTETSU SF-308L NITTETSU SF-309L Specification JIS Z3323 TS308L-FB0 Z3323 TS309L-FB0 AWS A5.22 E308L T0-1 A5.22 E309L T0-1 A5.22 E308T0-1 A5.22 E308T0-1 A5.22 E308LT0-1 A5.22 E308LT1-4 A5.22 E308LT1-1 A5.22 E308LT0-1 A5.22 E309T0-1 A5.22 E309LT0-1 A5.22 E309LT1-1 A5.22 E309LT1-1 A5.22 E309LT1-4 Page 168 169 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170

NITTETSU SF-308 NITTETSU FC-308H NITTETSU FC-308L

NITTETSU FC-308LP NITTETSU FC-308LV NITTETSU FC-308LT Flux Cord Arc Welding Wires NITTETSU SF-309 NITTETSU FC-309L

Z3323 TS308-FB0 Z3323 TS308H-BiF-FC0 Z3323 TS308L-FB0 Z3323 TS308L-FB1 Z3323 TS309-FB0 Z3323 TS309L-FB0 Z3323 TS309L-FB1

NITTETSU SF-309LP NITTETSU FC-309LV NITTETSU FC-309LP

NITTETSU SF-309MoL NITTETSU FC-309MoL NITTETSU SF-309MoLP

NITTETSU FC-309MoLV NITTETSU FC-309MoLP

Z3323 TS309LMo-FB0 Z3323 TS309LMo-FB0

A5.22 E309LMo T0-1 A5.22 E309LMo T0-1 A5.22 E309LMoT1-1 A5.22 E309LMoT1-1 A5.22 E309LMoT1-4

Welding method

Brand Name NITTETSU SF-316 NITTETSU SF-316L NITTETSU FC-316L

Specification JIS Z3323 TS316L-FB0 Z3323 TS316L-FB0 Z3323 TS316L-FB1 Z3323 TS347-FC0 AWS A5.22 E316 T0-1 A5.22 E316L T0-1 A5.22 E316LT0-1 A5.22 E316LT1-1 A5.22 E316LT1-1 A5.22 E316LT1-4 A5.22 E317T0-1 A5.22 E347T0-1 A5.22 E347T0-1 A5.22 E347T0-1 A5.22 E317LT0-1 A5.22 E317LT0-1 A5.22 E2209T0-1 A5.22 E2209T0-1

Page 170 170 170 170 170 170 170 170 170 170 170 170 172 172 172 172 172 172 172 172 174 175 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 178 178 178 178

NITTETSU SF-316LP NITTETSU FC-316LV

NITTETSU FC-316LP NITTETSU SF-347 NITTETSU FC-347 Flux Cord Arc Welding Wires NITTETSU FC-347H NITTETSU FC-347L NITTETSU SF-317L

NITTETSU FC-317L NITTETSU SF-329J3L

Z3323 TS347L-BiF-FC0 Z3323 TS317L-FB0

NITTETSU FC-DP8 NITTETSU SF-329J3LP NITTETSU SF-329J4L

NITTETSU FC-DP3 NITTETSU SF-DP3 NITTETSU FCM-430NL

Z3323 TS2209-FC0 Z3323 TS329J4L-FC0 Z3323 TS329J4L-FC0 Z3323 TS329J4L-FB0 Z3221 ES308-16 Z3221 ES309-16

NITTETSU FCM-430NCL NITTETSU-308R NITTETSU-309R NITTETSU-308LR NITTETSU-308LRB

NITTETSU-308ULR NITTETSU-309LR

Z3221 ES308L-16 Z3221 ES308L-16 Z3221 ES309L-16

A5.4 E308-16 A5.4 E309-16 A5.4 E308L-16 A5.4 E308L-16 A5.4 E308L-16 A5.4 E309L-16

NITTETSU-309ULR NITTETSU-309MR NITTETSU-309MLR NITTETSU-310R NITTETSU-312R NITTETSU-316R Covered Arc Welding Electrodes

Z3221 ES309Mo-16 Z3221 ES309LMo-16 Z3221 ES316-16

A5.4 E309L-16 A5.4 E309Mo-16 A5.4 E309Mo-16 A5.4 E310-16 A5.4 E312-16 A5.4 E316-16

NITTETSU-316LR NITTETSU-316ULR NITTETSU-316LNR NITTETSU-316CLR NITTETSU-317LR NITTETSU-317LNR NITTETSU-347R NITTETSU-347LR NITTETSU-347APR NITTETSU-170 NITTETSU-DP8 NITTETSU-DP3 NITTETSU-DP3W

Z3221 ES316L-16

A5.4 E316L-16 A5.4 E316L-16 A5.4 E317L16 A5.4 E34716 A5.4 E347L16 A5.4 E220916 A5.9 ER308 A5.9 ER308L A5.9 ER309

Z3221 ES2209-16

NITTETSU-410Nb NITTETSU-430Nb NITTETSU Y-308 BF-300M Submerged Arc Welding Materials

Z3221 ES329J4L-16 Z3221 ES329J4L-16 Z3221 ES409Nb-16 Z3221 ES409Nb-16

10

NITTETSU Y-308L BF-300M NITTETSU Y-304N BF-304M NITTETSU Y-309 BF-300M

Welding method

Brand Name NITTETSU Y-309 BF-300F NITTETSU Y-309LBF-21 NITTETSU Y-309L BF-24CL NITTETSU Y-316 BF-300M NITTETSU Y-316 BF-300F NITTETSU Y-316L BF-300M NITTETSU Y-316L BF-300F NITTETSU Y-316L BF-29T NITTETSU Y-317LBF-24 NITTETSU Y-347 BF-300M NITTETSU Y-170 BF-300M NITTETSU Y-DP8BF-30 NITTETSU Y-DP3BF-30 NITTETSU Y-410 BF-300M NITTETSU YM-308 NITTETSU YM-309

Specification JIS AWS A5.9 ER309 A5.9 ER309L A5.9 ER309L A5.9 ER316 A5.9 ER316 A5.9 ER316L A5.9 ER316L A5.9 ER316L A5.9 ER317L A5.9 ER347 A5.9 ER410 A5.9 ER308 A5.9 ER309 A5.9 ER316 A5.9 ER308Si

Page 178 178 178 178 178 178 178 178 178 178 178 178 178 178 180 181 182 184 184 184 184 184 184 184 184 184 184 184 184 184 184 184 184 184 184 184 184 184 184 186 186 186 186 186 186 186

Submerged Arc Welding Materials

NITTETSU YM-316 NITTETSU YM-308Si

NITTETSU YM-308L NITTETSU YM-308LSi NITTETSU YM-308UL NITTETSU YM-309Si NITTETSU YM-309L NITTETSU YM-309LSi Gas Metal Arc Welding Wires

A5.9 ER308 A5.9 ER308LSi A5.9 ER308L A5.9 ER309Si A5.9 ER309L A5.9 ER309LSi

NITTETSU YM-309Mo NITTETSU YM-309MoL NITTETSU YM-310 NITTETSU YM-316L NITTETSU YM-316LSi NITTETSU YM-316UL NITTETSU YM-317L NITTETSU YM-347 NITTETSU YM-347L NITTETSU YM-190 NITTETSU YM-410

A5.9 ER309Mo A5.9 ER309LMo A5.9 ER310 A5.9 ER316L A5.9 ER316LSi A5.9 ER316L A5.9 ER317L A5.9 ER347 A5.9 ER347 A5.9 ER410 A5.9 ER430 A5.9 ER430 A5.9 ER308

NITTETSU YM-410Nb NITTETSU YM-430 NITTETSU YM-430L NITTETSU YM-160 NITTETSU YT-308 Gas Tungsten Arc Welding Wires

NITTETSU YT-308L NITTETSU YT-308UL NITTETSU YT-309

NITTETSU YT-309L NITTETSU YT-309Mo NITTETSU YT-309MoL

A5.9 ER308L A5.9 ER308L A5.9 ER309

A5.9 ER309L A5.9 ER309Mo A5.9 ER309LMo

11

Welding method

Brand Name NITTETSU YT-310 NITTETSU YT-316

Specification JIS AWS A5.9 ER310 A5.9 ER316 A5.9 ER316L A5.9 ER316L A5.9 ER317L A5.9 ER320 A5.9 ER312 A5.9 ER347

Page 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186

NITTETSU YT-316L NITTETSU YT-316UL NITTETSU YT-317L NITTETSU YT-320 NITTETSU YT-312 NITTETSU YT-347 Gas Tungsten Arc Welding Wires

NITTETSU YT-347AP NITTETSU YT-DP8 NITTETSU YT-DP3 NITTETSU YT-DP3W NITTETSU YT-410

NITTETSU YT-410Nb NITTETSU YT-430 NITTETSU YT-430L NITTETSU YT-430Nb NITTETSU YT-190 NITTETSU YT-444 NITTETSU YT-630

A5.9 ER2205

A5.9 ER630

10) Special Alloy


Welding method Brand Name NITTETSU YAWATA WELD B(M) Specification JIS AWS A5.11 ENiCrFe-4 A5.11 ENiMo-9 A5.11 ENi-1 A5.11 ENiCrFe-2 A5.11 ENiCrFe-3 A5.11 ENiCrFe-3 A5.11 ENiCrMo-6 A5.11 ENiCrMo-3 A5.11 ENiCrMo-3 A5.11 ENiCu-7 A5.11 ENiCrMo-4 A5.14 ERNi-1 A5.14 ERNiCu-7 A5.14 ERNiCr-3 Page 190 191 192 192 192 192 192 192 192 192 192 192 192 194 196 196 196 196 196 196 196 196 196

Covered Arc Welding Electrodes

NITTETSU WELD 196 NITTETSU NI 141AC NITTETSU YAWATA WELD B NITTETSU YAWATA WELD 182 NITTETSU YAWATA WELD 182AC NITTETSU NI 9 NITTETSU WELD 42

NITTETSU WELD 112 NITTETSU WELD 112AC NITTETSU WELD 112M NITTETSU MON NITTETSU HST-C2

Submerged Arc Welding Materials

NITTETSU FLUX 10H NITTETSU FILLER 196 NITTETSU YT-NIC NITTETSU YT-MON YAWATA FILLER 82

Gas Tungsten Arc Welding Wires

NITTETSU FILLER 196 NITTETSU FILLER 92 NITTETSU YT-NC718 NITTETSU FILLER 625 NITTETSU YT-HSTC2 NITTETSU YT-HSTG2

A5.14 ERNiMo-9 A5.14 ERNiCrFe-6 A5.14 ERNiFeCr-2 A5.14 ERNiCrMo-3 A5.14 ERNiCrMo-4 A5.14 ERNiCrMo-8

12

Welding method Gas Tungsten Arc Welding Wires

Brand Name NITTETSU YT-NC622 NITTETSU YT-NC617

Specification JIS AWS A5.14 ERNiCrMo-10 A5.14 ERNiCrCoMo-1

Page 196 196

11) SurfacingCast Iron


Welding method Brand Name NITTETSU H-250B NITTETSU H-250C NITTETSU H-270C NITTETSU H-300C NITTETSU H-350C NITTETSU H-500 NITTETSU H-600 NITTETSU H-650 NITTETSU H-700 NITTETSU H-750 Specification JIS AWS Page 200 200 200 200 200 200 202 202 202 202 202 202 204 204 204 204 204 204 206 206 208 208

Covered Arc Welding Electrodes

NITTETSU H-800 NITTETSU H-1000

NITTETSU H-13Cr NITTETSU H-13M NITTETSU H-13MN

NITTETSU H-13CrM NITTETSU H-MCr NITTETSU H-11Cr NITTETSU H-30Cr NITTETSU H-30CrM NITTETSU C-1N NITTETSU C-5N

A5.15 ENi-CI A5.15 ENiFe-CI

12) Electroslag Welding Materials


Welding method Electroslag Welding Materials Brand Name NITTETSU YM-55SYF-15I NITTETSU YM-60EYF-15I Specification JIS AWS Page 212 212

13) Electrogas Welding Materials


Welding method Electrogas Welding Materials Brand Name NITTETSU EG-1 NITTETSU EG-3 NITTETSU EG-60 Specification JIS AWS A5.26 EG7Z T-G A5.26 EG70 T-G Page 216 216 216

13

14) NITTETSU High Efficiency Welding Process


Welding Process Subnap Welding Process Cut Wire Submerged Arc Welding Process One Side Welding Process NITTETSU SB-30/SB-31 Application High Quality and Low Cost Welding Process for Thick Steel Plate High Efficiency Submerged Arc Welding Process One-Side Welding Process to Shorten Welding Time Using Various Kind of Backing Materials and Fluxs Page 220 222 224 225

NITTETSU SB-41

SOFT BACKING SUBMERGED ARC WELDING PROCESS NITTETSU FLUX COPPER BACKING SUBMERGED ARC WELDING PROCESS

1. It is small and light and consequently is easily set up by sticking adhesive face of aluminium foil to steel plate. 2. It can be used by cutting to the desired length and bending up or down since solid fluxes are tile-like and flexible. 3. It can be used for uranami (sound penetration bead) welding with a wide range of welding conditions since solid fluxes have high fire resistance. 4. I nventory control is easy since it rarely absorb moisture and, therefore, redrying is not necessary. One-side welding where backing jigs cannot be used like welding of curved plates in shipbuilding and site welding of bridges. Welding of large plates for ships, bridges and structures.

226

228 230

15) Welding Machine and Equipment


Machine and Equipment CARRYBOY Series(Simplified traveling carriage) CARRYBOY Series(Simplified traveling carriage) CARRYBOY Series(Simplified traveling carriage) CARRYBOY Series(Simplified traveling carriage) Brand Name CARRYBOY Series CARRYBOY ACE NSCarry Auto CARRYBOY K TRACK AUTO SY-mini NAVI-21 SESNET-W VEGA NS-Oneside MAG NH-HISAW NW-150AH-III NW-350AH-III NW-300ARS NW-150ACG Application Horizontal Fillet Welding Horizontal Fillet Welding Flat and horizontal Fillet Welding Horizontal Fillet Welding All position Welding All position Welding Vertical Butt welding Vertical Butt welding Page 236 238 239 240 241 242 243 244 246 248 249 250 252 255 256 257 259 259 261 262

Gravity Welder Versatile Arc Welding Equipment Portable Type Arc Welding Robot SESNET Welder Electrogas Welding Machine High Heat Input Submerged Arc Welding Equipment Diaphragm Welding Equipment NS-Oneside MAG Welding Equipment PANEL Welding Equipment Multi-electrode Automatic Welding Equipment One-Side SAW Welding Equipment High Speed FCuB Welding Equipment Inverter Plasma Welder Inverter Plasma Welder AC/DC Plasma Welder Plasma Gouging Machine

Welding of Box column corner joints Welding of Box column diaphragms Joining of steel plates Horizontal Fillet Welding of bridge ribs and stiffeners Horizontal Fillet Welding of longitudinals and stiffeners Joining of large steel plates Joining of large steel plates Welding of various metals Welding of various metals Welding of all metals Gouging of various metals

14

Machine and Equipment Plasma Gouging Machine Circumferential Fillet Welding Equipment

Brand Name NW-300ACG

Application Gouging of various metals Welding of automotive parts, etc Welding of electromagnetic valves,sensor parts,etc Seam Welding of flat plates and pipes Butt welding of flat plates Seam Welding of various pipes Welding of box corner sections Spot welding of OA machines

Page 262 263 264 265 266 267 268 269

Pipe Overlap Eillet Welding Equipment Flat Plate Butt Welding Equipment Flat Plate and Pipe Seam Welding Equipment Pipe Welding Equipment Box Corner Welding Equipment Plasma Robot Spot Welding Equipment

16) Approval List of Welding Materials


Welding Process 1.Covered Arc Welding Materials 2.Gas shielded Arc Welding Materials 3.Submerged Arc Welding Materials Page 272 278 284 286 286

4.One-side Submerged Arc Welding Materials 5.Electrogas Arc Welding Materials

15

Warning for Safety in Welding

WARNING

Be sure to follow the safety practices stated in the following in order to protect welders, operators and accompanied workers from a serious accident resulting in injury or death.

Be sure to follow the safety practices stated in the following when you use welding consumables. Be sure to follow the safety practices stated in the instruction manual when you use welding equipment.

WARNING
Electric shock can kill.

Do not touch live electrical parts. (A covered electrode held with an electrode holder and a wire in welding are electrically live.) Wear dry, insulated gloves. Do not wear teared and wet gloves. Use an electric shock prevenling device (open-circuil-voltage-reducing device) when welders or operalors work in confined or high-level paces. Use also a lileline when a welder or operator conducts welding at a highlevel spaces. Follow the safety practice stated in the instruction manual of the welding machine before you use. Do not use a welding machine case or cover of which is removed. welding cables must be of a size adequale for the capacity expected. Welding cables must be maintained, and a damaged cable must be repaired or replaced new.

16

CAUTION

Fumes and gases generated in welding. can be dangerous to your health. Welding in conlined spaces can be dangerous to suffocation because of oxygen deficient atmospheres.

Keep your head out of the source of fumes or gases to prevent you from directly breathing high density fumes or gases. Use local exhaust ventilation, or wear respirators in order to prevent you from breathing fumes and toxic gases Use general ventilation for welding in the workshop. Particularly in welding in confined spaces, be sure to use adequate ventilation, or wear respirators in the presence of a trained supervisor. Do not weld where operations of degreasing, cleaning, spraying, and painting are present nearby. Welding work close to these operations may cause a generation of harmful gases. Use adequate ventilation or respirators with special attention in welding plated and coated steel. Use respirators, eye safety glasses and safety leather gloves when handling welding fluxes in order to prevent you from the flux dust.

CAUTION
Arc rays can injure eyes and burn skin.

Wear hand shields with an adequate grade of shade in welding and in supervising the welding work. Select the correct grade of shade for filter lenses and filter plates suitable for exact welding work by referring to the standard of JIS T8141. Wear protectors suitable for preventing you from the arc rays such as safety leather gloves for welding, long sleeve shirts, foot covers, Ieather aprons, etc. Use, at need, shade curtains for welding by surrounding the welding areas in order to prevent accompanied workers from the arc rays.

17

CAUTION
Fire and explosion can take place.

Never weld at areas adjacent to highly inflammable materials. Remove combustibles so that spatter cannot ignite them. If combustibles cannot be removed, cover them with a noninflammable material. Do not weld a vessel or pipe which contains combustibles or being sealed. Do not put a hot weldment close to combustibles right after welding finished. When welding cellings, floors, walls, etc. remove combustibles at the other side of them. Any part of welding wire, with exception of wire extended at the tip of the torch, must be free from touching on the electrical circuit of the base metal side. Fasten the cable joints and seal them in a insulation tape. The cable for the base metal side should be connected closer to the part of welding. Be ready to cope with a possible accident by equipping fire-extingushing equipment adjacent to the welding areas.

CAUTION

Flying spatters and slags can injure eyes and cause skin burns. High temperature heat in welding can cause skin burns.

Wear safety glasses, safety leather gloves for welding, long sleeve shirts, foot covers, leather aprons, etc. Do not touch weldments while hot.

18

CAUTION

The tips of the welding wires and filler wires can injure eyes, faces, etc.

Do not loose your hold on the tip of the wire when take off the tip of the wire. Do not direct the welding torch to your face when check the wire feeding condition.

CAUTION

Falling down and dropping welding consumables can injure you.

Wear safety shoes, and pay your attention not to drop welding consumables on your body when you carry and handle them. Keep your posture correct not to cause a crick in your back while handling them. Follow the handling instructions shown on the surface of the pail pack wire packages when handle them. Pile up welding consumables so that falling down and dropping cannot take palce while being stored and carried.

19

You might also like