Professional Documents
Culture Documents
contents
Series 80
Globe & Angle Irrigation Valves 80-1, 80-3/4 Turf Irrigation Valves
4
4 6
SERIES GAL
Gal Plastic Valves
8
8
SERIES 100
Metal Hydraulic Control Valves Technical Data
12
12 14
SERIES 80
Pressure losses
Pressure loss (3-way valves) 1/ 40mm, 1 50mm, 2 2 Flow gpm 22 44 88 132 176 m3/h 5 10 20 30 40 Angle psi 0.19 0.75 3 6.74 bar 0.01 0.05 0.21 0.46 Straight psi 0.33 1.33 5.33 12 bar 0.02 0.09 0.37 0.83 Angle psi 0.11 0.43 1.72 3.9 6.9 bar 0.01 0.03 0.12 0.27 0.48 Straight psi 0.19 0.75 3 6.74 12 bar 0.01 0.05 0.21 0.46 0.83
Dimensions
mm inch mm inch mm inch kg lbs
1/ 40mm, 1 2 Angle 171 6.73 163 6.42 88 3.46 0.8 1.8 159 6.23 163 6.42 165 6.5 0.9 2
50mm, 2 Straight 166 6.54 163 6.42 165 6.5 0.9 2 171 6.73 163 6.42 88 3.46 0.8 1.8
Straight Angle
1 /1
2A
1 /1
psi mwc
10 10 9 8 7 6 5 4 3 3 8 6 5 4
Operation data
Max. Flow Pressure range Max. Water Temp. Max. Ambient Temp. m3/hr gpm bar psi C F C F
A,
50mm, 2 40 176
1
10 50 6 7 2 8 9 100 3 4 2 5 6 7 3 8 9 100 4
m3/h gpm
Electrical Specications
Standard: 24 VAC 50/60 Hz. 10% Optional: other voltage rating or latching DC operators Current: 0.26 Amp Inrush; 0.12 Amp holding
2-way controlled
3-way controlled
SERIES 80
Solenoid
Manual override
Flow rectier
Technical Data
Pressure losses
ow gpm m3/h 2.2 4.4 8.8 13.2 17.6 22.0 26.4 30.8 0.5 1 2 3 4 5 6 7 psi 1.42 1.60 1.65 2.90 4.35 6.82 Pressure loss 80-3/4 bar 0.10 0.11 0.11 0.20 0.30 0.47 psi 1.42 1.42 1.42 1.65 2.61 3.63 4.83 6.09 80-1 bar 0.10 0.10 0.10 0.11 0.18 0.25 0.33 0.42 Height Width Length - Straight Center to outlet-Angle Weight mm inch mm inch mm inch kg lbs
Dimensions
Operation data
mwc
7 6 5 4 3 2 0.1 0.5 0.4
/4 25mm
psi
1 25mm
25mm, 1 10 44
0.3
1 5
2 10
4 2
7 8 9 10 3 4
m 3/h gpm
Electrical Specications
Standard: 24 VAC 50/60 Hz. 10% Optional: other voltage rating or latching DC operators Current: 0.26 Amp Inrush; 0.12 Amp holding
SERIES GAL
Model 95
Opened Valve
Model 96-6
Closed Valve
Advantages
Structural simplicity Superb hydraulic performance Reliable control of corrosive liquids Light-weight, cost-saving Minimum maintenance - maximum dependability
Model 75-1-E/D2
Model 75-2-T-E/D2
This graph provides a guide, based on ow rate and pressure, for the proper selection of valve size.
95/96-3
95/96-4
75-2 1 2
75-1
75-2
75-11 2
75-3
50 40 30 20
Line Pressure
60 40 30 20
#1
75- 3 4
#1
#95
#95
#96
3w
10 8 7 6 5 4 1 5 6 7 2 8 9 10 3 4 20 5 6 7 8 9 10 30 40 50
#22 #21
#22 #21
#22
15
10 7
2w
96-6
60
20 60 70 80 90 100
30
40
50 200
60 70 80 90 100 300
200
300
Locate the ow rate on the horizontal axis and draw a line upwards. Locate the line pressure on the vertical axis and draw a line to the right. The intersection point of the two lines marks the appropriate valve size. Example: line pressure 28m (40 psi), ow rate 23 m3/h (100 gpm), appropriate valve = model 75-2.
Principle of Operation
1) 3-Way Control
This control device admits pressure into the control chamber, closing the valve, or relieves pressure to the atmosphere, fully opens the valve.
A solenoid operator plugs the control chamber outlet. A permanent connection from the upstream to the control chamber ensures line pressure in the chamber and thus valve closure. Energizing the solenoid operator causes the control chamber to drain to downstream, opening the valve.
VALVE CLOSED
VALVE OPENED
20
1 25
75 GRP TH 1 1 /2 40
2 50
2 1 /2 65
3 80
95 uPVC TH 3 80
3 90
96 uPVC SW 4 110
6 160
* Non - Integral Solenoid Abbreviations: GRP = Glass - Reinforced Polyamide uPVC = Unplasticized Polyvinil Chloride TH = Threaded SW = Solvent Welded * For Non-Return Feature, please add N - E/D2-N
Headloss Chart
95/96 -3
75-11 /2
75-2 75-2
75-3
96-4
96-6
6 5 4 3
4 3
1
8 7 6 5
8 7
6 5 4 3
" 1"
2 1.5 1 .9 .8 1 .7
4 3
10 50 60
20 80 100
30 150
40
50 60 200 300
80
300
1300
1700 gpm
400 m3/h
m /h
gpm
psi mwc
Pressure Rating
Model 75 Model 75 Model 95/96 Model 96
gpm
3/4, 1 - 80m (115 psi) 11/2, 3 - 100m (145 psi) 3, 4 - 80m (115 psi) 6 - 80m (115 psi)
Specifications
Materials
Model 75: 30% Glass Reinforced Polyamide Models 95, 96: uPVC Bonnet 30% Glass Reinforced Polyamide Diaphragm Natural Rubber Spring SST 302 Spring Seat Polyamide Nuts And Bolts Coated Steel or SST 304 Solenoid Operator: Coil Polyester-coated Steel Plunger SST Seal BUNA-N or NR Valve: Body
Connections
Thread: Female ISO (BSP), ANSI (NPT) Solvent Welding: BS 4346.1/ASTM D2467/AS 1477 ISO 727, DIN 8063
Electrical Data
8 Watt Operator: Voltage 24vac 50hz, Others On Request, Inrush Current 1.1a, Holding 0.66a 3 Watt Operator: Voltage 24vac, 50hz/60hz, Others On Request, Inrush Current 0.3 A, Holding 0.15a
Note: The Standard Coil is 24 Vac, 50hz. Others On Request The factory reserves the right to modify specifications without prior notice.
Dimensions
Model 75 75 75 75 75 75 95/96 96 96 mm 20 25 40 50 65 80 80 110 160
Size inch 3/ 4 1 1 1 /2 2 2 1 /2 3 3 4 6 mm 113 124 188 199 228 236 258 278 360
L L
inch 4 1 /2 4 7 /8 7 3 /8 7 7 /8 9 9 1 /4 101/8 11 14
inch 2 3 /4 2 7 /8 4 3 /8 4 3 /8 4 5 /8 4 3 /4 7 5 /8 8 15
10
SERIES GAL
11
SERIES 100
12
Technical Data
1
Series 100
Technical Data
5 Flexible reinforoed Creating low losses diaphragm-no at high ow rates bearing, guides or intemal seals used Unique Sesign
Intemal SST spring: superb regulation at high reliability allows the use of wide range 2 Pilot valves for of diaphragm superb regulation rubber types
Unique Sesign
at high reliability Intemal SST spring: allows the use of wide range Polymeric coating, of diaphragm UV and corrosion Intemal 3 SST spring: rubber types resistant allows the use of wide range of diaphragm rubber types Polymeric coating, UV and corrosion resistant Polymeric coating, UV and corrosion resistant
Creating low losses at high ow rates Flexible reinforoed diaphragm-no Wide materials bearing, guides or 6 variety intemal seals used Flexible reinforoed diaphragm-no bearing, guides or intemal seals used Wide materials variety Wide materials variety
Components
Component No. Components Description
Description
Bonnet Body Bonnet Diaphragm Diaphragm Description Spring Spring Body Spring Disc Disc Bonnet Spring Bolt Diaphragm Bolt Short Bolt Spring Washer Spring DiscBolt Short Nut Bolt WasherRing (Hook) Suspension Short Bolt Nut Washer Nut Suspension Ring (Hook) Suspension Ring (Hook)
Body
10
5 1
10
5 1
9 10
9 8
3 3
3 3
Dorot Dorot
CONTROL VALVES
E V E R Y T H I N G
I S
U N D E R
C O N T R O L
11
CONTROL VALVES
13
11
SERIES 100
Technical Data
Available Models:
Pattern Connection Material Max. Pressure mm inch 20 3/4 25 1 40 11/2 50 2 65 21/2 80 323 80 3 100 4 150 6 200 868 200 8 250 10 300 12 350 14 400 16 450 18 500 20 600 24 Threaded Cast Iron Threaded Bronze Victaulic Cast Iron Flanged Cast Iron Flanged Bronze Flanged Flanged Threaded Cast Iron Victaulic Cast Iron Threaded Bronze Flanged Threaded
Available Sizes
Design Specifications:
Materials Body and Bonnet Diaphragm Spring Nuts and Bolts Coating * Others Upon Request Standard Cast Iron, Ductile Iron, Bronze Natural Rubber SST 302 Coated Steel Polyester Optional* Cast Steel, Stainless Steel NBR, EPDM, Neoprene SST 316 SST Epoxy, Nylon, Rubber Threads Control Bores F-BSP 1/8,1/4,1/2 NPT Connections Standard Optional* ANSI B16 JIS B22 AS 10 F-NPT Epoxy, Nylon, Rubber Flanges ISO 2084, 2441, 5752
Throttling Bonnet
14
Type Standard Low Pressure Standard S. Low Pressure Standard Low Pressure S. Low Pressure Extreme High Pressure Standard Low Pressure Extreme High Pressure High Pressure Standard Low Pressure S. Low Pressure Extreme High Pressure Standard Low Pressure Extreme High Pressure Standard Low Pressure High Pressure Low Pressure
No. 18 85 13 82 03 02 12 60 69 32 05 61 70 71 62 09 91 35 72 36 37 63 73 40 50 78 92 mwc 12-160 5-100 12-160 5-50 15-160 7-100 4-50 20-160 10-250 12-160 4-100 20-160 10-250 10-250 15-160 5-100 2-60 20-160 10-250 7-160 2-100 20-160 10-250 7-160 2-100 10-250 2-100
Pressure Range psi 17-230 7-140 17-230 7-70 21-230 10-140 6-70 28-230 15-360 17-230 6-140 28-230 15-360 15-360 21-230 7-140 3-85 28-230 15-360 10-230 3-140 28-230 15-360 10-230 3-140 15-360 3-140
1 1 /2
50, 65 50HP 80, 100 80HP 100HP 150 150HP 200, 300, 350 200HP 250 250HP, 400HP, 500HP, 600HP
2, 21/2, 323 2HP 3, 4 3HP 4HP 6, 868 6HP 8, 12, 14 8HP 10 10HP, 16HP, 20HP, 24HP,
* Standard Diaphragm: Nylon Reinforced Natural Rubber. Optional Materials: Nitrile, EPDM, Neoprene Available Upon Request. ** HP = High Pressure
Pressure Rating
Pressure rating of series 100 valves is body strength, connection standard and diaphragm type. Pressure rating of valve body of standard models: 16 Bar / 230 psi. Pressure rating of valve body of high pressure models: 25 Bar / 360 psi. Connection standard is marked on the identication plate, assembled on the valve body. Diaphragms operation pressure range is presented at the above table.
15
SERIES 100
Technical Data
Dimensions and Weights
Straight Flow, Threaded Connection
Valve Size mm 20 25 40 50 65 80LF* 80 * LF = Low Flow inch 3/ 4 1 1 1 /2 2 2 1 /2 323 3 L Cast Iron mm 115 120 170 188 219 225 316 inch 4.53 4.72 6.69 7.4 8.62 8.86 12.44 Bronze mm 112 119 149 184 212 221 316 inch 4.41 4.69 5.87 7.24 8.35 8.7 12.44 Cast Iron mm 43 52 93 115 118 126 135 inch 1.69 2.05 3.66 4.53 4.65 4.96 5.31 H Bronze mm 43 52 86 101 109 116 135 inch 1.69 2.05 3.39 3.98 4.29 4.57 5.31 mm 20 24 33 42 46 54 53 D inch 0.79 0.94 1.3 1.65 1.81 2.13 2.09 mm 68 68 93 112 112 112 200 W inch 2.68 2.68 3.66 4.41 4.41 4.41 7.87 Weight Cast Iron kg 1 1 2.2 3.2 3.6 4.5 11 lbs 2.2 2.2 4.9 7 7.9 9.9 24 Bronze kg 1 1 1.8 2.6 3.4 3.9 lbs 2.2 2.2 4 5.7 7.5 8.5
L w D H
Weight kg lbs 1.7 3.7 2.4 5.3 3.6 7.9 10.8 23.8
16
Straight Flow, Flanged Connection - High Pressure Models 25 Bar / 360 psi
Valve Size mm 50 50TH 80 100 150 200 250 400 450 500 600 * TH = Threaded inch 2 2TH 3 4 6 8 10 16 18 20 24 mm 228 250 310 356 436 530 636 715 715 900 900 L inch 8.98 8.98 12.2 14.02 17.17 20.87 25.04 28.15 28.15 35.43 35.43 mm 169 120 237 263 378 481 546 830 830 970 970 H inch 6.65 6.65 9.33 10.35 14.88 18.94 21.5 32.68 32.68 38.19 38.19 mm 85 42 105 120 150 180 215 310 340 490 490 D inch 3.35 1.65 4.13 4.72 5.91 7.09 8.46 12.2 13.39 19.29 19.29 mm 175 175 200 260 320 400 495 830 830 980 980 W inch 6.9 6.9 7.87 10.24 12.6 15.75 19.49 32.68 32.68 38.58 38.58 kg 10 6 30 38 75 123 190 433 460 674 696 Weight lbs 22 13 66.1 83.8 165.3 271 419 955 1014 1486 1534
17
SERIES 100
Technical Data
Hydraulic Performance
mm 20 3/ inch 4 m3/hr 6 Max. Flow Continuance gpm 26.4 m3/hr 16 Max. Flow Intermittent gpm 72 m3/hr Minimal Flow gpm Kv m3/hr @ 1 bar 17 Cv gpm @ 1 psi 20 Kv* m3/hr @ 1 bar Cv* gpm @ 1 psi Valve Size 25 1 10 44 27 120 40 1 1 /2 25 110 68 300 50 2 40 176 109 480 65 2 1 /2 40 176 109 480 80 323 40 176 109 480 80LF 3 90 396 245 1080 100 4 100 440 273 1200 150 200LF 6 868 350 350 1540 1540 955 955 4200 4200 <1 <5 600 670 700 780 550 640 200 250 8 10 480 970 2112 4268 1309 2645 5760 11640 300 12 1400 6160 3818 16800 350 14 1400 6160 3818 16800 400 16 2500 11000 6818 30000 450 18 2500 11000 6818 30000 500 20 3890 17116 10609 46680 600 24 5500 24200 10609 46680
17 20 -
64 75 -
95 110 78 91
95 110 -
95 110 -
1900 2220 -
1900 2220 -
Q[ hr ] Kv
P(Psi) =
Q[gpm] Cv
1/2
Headloss Chart
1 1 1/2 3/4
, 323
2, 2
6, 8
68
14
18
psi mwc 10 9 8 10 7 9 8 6 7 5 6 4 5 4 3 2 3 2
1 10
10 100
100 1000
10
12,
16,
1000 10000
Cavitation Data
350 psi bar 25
20,
24
Upstream Pressure
Cavitation zone Safe zone for Bronze valves Safe operation zone
8 bar psi
Downstream Pressure
18
SERIES 100
Typical Applications
PR Pressure Reducing Valve
Description
The valve maintains a preset downstream pressure, regardless of upstream pressure or ow rate uctuation. The main valve is controlled by either a 3-way pilot valve (allowing full opening when upstream pressure drops below the pressure set-point), or by a 2-way pilot valve (creating a minimal differential in open position).
Features
Accurate, stable control from no-ow to full ow Simple and reliable design Exceptionally low losses at high ow WRAS Approval no. 04251
1 2 3 4
Main valve Self-ushing lter Cock valve* Manual over-ride selector valve* 5 3-way pilot valve (other types are optional) * Optional component
The valve maintains upstream pressure, regardless of ow rate variations. The valve will be in the closed position if the upstream pressure drops below the set-point and will fully open when the upstream pressure exceeds the set-point.
Features
Accurate, stable control from no-ow to full ow Simple and reliable design Exceptionally low losses at high ow
1 2 3 4
Main valve Self-ushing lter Cock valve* Manual over-ride selector valve* 5 3-way pilot valve (other types are optional) * Optional component
Features
Accurate and repeatable level control Simple and reliable design Easy installation and maintenance Adjusts the inlet ow to the reservoirs outlet ow WRAS Approval no. 0009092
1 2 3 4 5
Main valve Self-ushing lter Cock valve* Needle valve Modulating oat pilot valve
* Optional component
1
Optional Control System Components:
19