You are on page 1of 231

Valve terminal systems Valve terminal systems according to stan-

ISO 5599-1, size 1, Series 581


Brochure

dard

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581

Valve terminal systems


Valve terminal system, Series 581 Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

12

Valve terminal system, Series 581 Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs Manual override: without detent Valve terminal system, Series 581 Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, electronic connection module and multiple cable Manual override: without detent

16

20

Valve terminal system, Series 581 Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: D-Sub plug, 25-pin, top Manual override: without detent

24

Valve terminal system, Series 581, size 1 Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

28

Valve terminal system, Series 581, size 1 Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

32

Valve terminal system, Series 581 Qn=1100 l/min Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Electrical connector without standard (form B industry) Manual override: with detent

36

Valve terminal system, Series 581 Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: with detent

40

Valve terminal system, Series 581 Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: without detent, without

44

Valve terminal system, Series 581 Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs Manual override: with detent

48

Valve terminal system, Series 581, size 1 Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: with detent

52

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics


Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581

Valve terminal system, Series 581 Qn=1100 l/min compressed air connection output: Base plate ISO 5599-1

56

Single valves, electrically operated, 15 mm pilot valve width


2x3/2-way valve, Series 581, size 1 Qn=950 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent 5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent 2x3/2-way valve, Series 581, size 1 Qn=950 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

60

62

64

66

69

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

71

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

73

5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

75

Single valves, electrically operated, 22 mm pilot valve width


2x3/2-way valve, Series 581, size 1 Qn=950 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

78

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

80

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

83

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent with differential piston

86

5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent closed center

89

5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent exhausted center

92

5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent pressurized center

95

Single valves, electrically operated, 30 mm pilot valve width


2x3/2-way valve, Series 581, size 1 Qn=950 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent with differential piston 5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent 2x3/2-way valve, Series 581, size 1 Qn=950 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent

98

100

102

104

106

109

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics


Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent with differential piston 5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent 2x3/2-way valve, Series 581, size 1 Qn=950 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without with differential piston 5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without 2x3/2-way valve, Series 581, size 1 Qn=950 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent 5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent with differential piston

111

113

115

117

120

122

124

126

128

130

132

134

136

5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent

138

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581

Single valves, electrically operated, ATEX


5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve single solenoid suitable for ATEX

140

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve double solenoid suitable for ATEX

142

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve; with differential piston suitable for ATEX 5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve suitable for ATEX

144

146

Single valves, pneumatically operated


2x3/2-way valve, Series 581, size 1 Qn=950 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks ATEX certified

148

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks Single air pilot ATEX certified

149

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks double air pilot ATEX certified

150

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks Manual override: with detent ATEX certified

151

5/2-way valve, Series 581, size 1 Qn=1400 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks with differential piston ATEX certified 5/3-way valve, Series 581, size 1 Qn=1100 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks ATEX certified

152

153

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics


Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581

Slow-start valves
Slow-start valve Qn=3300 l/min Pilot valve width: 15 mm Manual override: without detent

155

Slow-start valve Qn=3300 l/min Pilot valve width: 22 mm Manual override: with detent

157

Slow-start valve Qn=3300 l/min Pilot valve width: 30 mm Manual override: without detent, with detent, without

159

Slow-start valve Qn=3300 l/min

161

Single subbase, for soft-start valve compressed air connection output: G 1/2

162

Accessories Modular system, electrical accessories


Electro module Plug, M8, 3-pin 581, Modular system

163

Connecting cable, Series CN2 Plug, M8, 3-pin 581, Modular system Pilot valve, 15 mm pilot valve width Manual override: without detent 581, Modular system

164 164

Pilot valve, 30 mm pilot valve width with CNOMO porting configuration 581, Modular system

166

Pilot valve, 22 mm pilot valve width Manual override: with detent 581, Modular system

168

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581

Coil, Series CO1 Coil width22mm Form B, industry

169

3/2-way valve

171

Control unit for manual override for581, Modular system Multipole plug Socket, C/2 581, Modular system

173 174

Blanking plug for581, Modular system

174

Modular system, mechanical accessories


valve housing, without cover standard:ISO 5599-1 for581, size 1, Aluminum

175

valve housing, without cover standard:ISO 5599-1 for581, size 1, Plastic

176

valve cover, with or without pilot valve standard:ISO 5599-1 for581, size 1, for electrically operated valves, modular system

177

throttle insert for flow control, Port 3/5 for581, size 1, Modular system

177

plug set for flow control screws for581, size 1, Modular system

178

Safety plugs for throttle insert for581, size 1 - 4, Modular system

179

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics


Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581

Maintenance plate to exchange valve standard:ISO 5599-1 for581, size 1

179

Valve cover seal, Valve housing seal for581, size 1

180

Mecproof, cabinet mounting standard:ISO 5599-1 for581, size 1, Modular system

181

Single subbase
Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4 Reversed pressure supply permissible Single subbase, thread connections on the bottom standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4 Reversed pressure supply permissible Single subbase, ports on side standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/8 -8 Single subbase, ports on bottom standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/8 -6 Subbase, for direct mounting of ISO valves on cylinders standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/8

183 184

186 187 188

Intermediate and end plates, type F


Intermediate plate, ports 2 and 4 on bottom standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4 Can be assembled into blocks Single base plate principle Reversed pressure supply permissible With collective pilot air exhaust End plate left, End plate right standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks Base plate principle, multiple Reversed pressure supply permissible

190

192

Intermediate and end plates, type G


Intermediate plate, Ports 2 and 4 side or bottom standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4 Can be assembled into blocks

194

End plate left, End plate right standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks Base plate principle, multiple Reversed pressure supply permissible With collective pilot air exhaust

196

Intermediate and end plates, type H


Intermediate plate, Ports 2 and 4 on side, 1,2 and 4 also on bottom standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4 Can be assembled into blocks

198

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

10

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581

End plate left, End plate right standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks

201

Intermediate and end plates, type K


Intermediate plate, ports 2 and 4 on bottom standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/8 - 6 Can be assembled into blocks

204

Intermediate plate for separate air supply, ports 2 and 4 on bottom standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/8 - G 1/4 Can be assembled into blocks

206

End plate left, End plate right standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks

208

Accessories
Blanking plate standard: ISO 5599-1 Frame size: ISO 1

210

Blanking plate standard: ISO 5599-1 Frame size: ISO 1 Throttle plate standard: ISO 5599-1 Frame size: ISO 1

211 212

Pressure regulator for vertical stacking standard: ISO 5599-1 Frame size: ISO 1 Controlled connection: 1, 2, 4, 2, 4

213

Accessories, type F
Transition plate standard: ISO 5599-1 Frame size: ISO 1 - ISO 2 Can be assembled into blocks Reversed pressure supply permissible End plates for adapter plate standard: ISO 5599-1 Frame size: ISO 1 - ISO 2 Can be assembled into blocks Reversed pressure supply permissible Supply plate standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks Plate principle Seal for supply plate standard:ISO 5599-1 Frame size:ISO 1

215

217 218

219

Angle subplate standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4

220

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics


Valve terminal systems Valve terminal systems according to standard

11

ISO 5599-1, size 1, Series 581

Blanking piece standard:ISO 5599-1 Frame size:ISO 1 - ISO 3

221

Accessories, for intermediate plates standard:ISO 5599-1 Frame size:ISO 1

222

Accessories, type G
Transition plate standard: ISO 5599-1 Frame size: ISO 1 - ISO 2 Can be assembled into blocks Reversed pressure supply permissible Supply plate standard: ISO 5599-1 Frame size: ISO 1 Reversed pressure supply permissible

223

224

Blanking piece standard:ISO 5599-1 Frame size:ISO 1 - ISO 2

224

Accessories, type H
Supply plate standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks Plate principle Seal for supply plate standard:ISO 5599-1 Frame size:ISO 1

226

227

Accessories, type K
Transition plate standard: ISO 5599-1 Frame size: ISO 1 - ISO 2 forISO 1, ISO 2 Sealing kit standard:ISO 5599-1 Blanking piece, Subbases ISO 5599-1 standard:ISO 5599-1 Frame size:ISO 1 - ISO 3 forThread connection on bottom

228

229 230

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

12

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

P581_168

Standards Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:2000,with electrical connector/plugSingle wire connection, Electrical connector DC operating voltage Voltage tolerance DC

ISO 5599-1 Single plug-in wiring Single base plate principle -0.95 bar / 10 bar -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 65 24 V -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

13

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

Dimensions,all ports on bottom

D581_231_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 65 60 65

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T1 85 92 85 92

L 25 30 25 30 U1 93 93 93 93

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

14

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 86

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T1 107

H3 39.5 U1 93

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

15

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T1 96

D 11 U1 93

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

16

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs Manual override: without detent
Standards Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:2000,with electrical connector/plug Number of valve positions DC operating voltage Voltage tolerance DC cable connection ISO 5599-1 Single plug-in wiring Single base plate principle -0.95 bar / 10 bar -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 65 16 24 V -10% / +10% 1m

P581_129

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

17

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs Manual override: without detent
Dimensions,all ports on bottom

D581_231_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 65 60 65

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T1 85 92 85 92

L 25 30 25 30 U1 93 93 93 93

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

18

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs Manual override: without detent
Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 86

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T1 107

H3 39.5 U1 93

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

19

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs Manual override: without detent
Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T1 96

D 11 U1 93

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

20

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 55991 Electr. connection: Single wire connection, electronic connection module and multiple cable Manual override: without detent
Standards Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:2000,with electrical connector/plug Number of solenoid coils DC operating voltage Voltage tolerance DC cable connection ISO 5599-1 Single plug-in wiring Single base plate principle -0.95 bar / 10 bar -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 67 20 24 V -10% / +10% 10 m

P581_136

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

21

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 55991 Electr. connection: Single wire connection, electronic connection module and multiple cable Manual override: without detent
Dimensions,all ports on bottom

D581_231_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 65 60 65

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T1 85 92 85 92

L 25 30 25 30 U1 93 93 93 93

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

22

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 55991 Electr. connection: Single wire connection, electronic connection module and multiple cable Manual override: without detent
Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 86

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T1 107

H3 39.5 U1 93

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

23

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 55991 Electr. connection: Single wire connection, electronic connection module and multiple cable Manual override: without detent
Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T1 96

D 11 U1 93

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

24

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: D-Sub plug, 25-pin, top Manual override: without detent

P581_153

Standards Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:2000,with electrical connector/plug Number of solenoid coils DC operating voltage Voltage tolerance DC

ISO 5599-1 Multipole Single base plate principle -0.95 bar / 10 bar -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 65 10 24 V -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

25

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: D-Sub plug, 25-pin, top Manual override: without detent

Dimensions,all ports on bottom

D581_231_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 65 60 65

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T1 85 92 85 92

L 25 30 25 30 U1 93 93 93 93

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

26

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: D-Sub plug, 25-pin, top Manual override: without detent

Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 86

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T1 107

H3 39.5 U1 93

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

27

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: D-Sub plug, 25-pin, top Manual override: without detent

Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T1 96

D 11 U1 93

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

28

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

P581_198

Standards Bus module Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:,with plug Number of solenoid coils Operational voltage electronics Electronics voltage tolerance

ISO 5599-1 F-design Field bus Single base plate principle -0.95 bar / 10 bar -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 65 16 24 V DC -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

29

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

Dimensions,all ports on bottom

D581_231_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 65 60 65

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T1 85 92 85 92

L 25 30 25 30 U1 93 93 93 93

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

30

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 86

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T1 107

H3 39.5 U1 93

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

31

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T1 96

D 11 U1 93

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

32

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

P581_131

Standards Bus module Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:,with plug Number of valve positions Supported field bus protocols:

Operational voltage electronics Electronics voltage tolerance cable connection

ISO 5599-1 C-design Field bus Single base plate principle -0.95 bar / 10 bar -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 65 16 Profibus DP INTERBUS-S CANopen DeviceNet 24 V DC -10% / +10% 1m

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Profibus DP, 128 inputs/outputs INTERBUS S, CANopen, DeviceNet, 64 inputs/outputs Bus module optionally included in scope of delivery, see the Internet configurator

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

33

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

Dimensions,all ports on bottom

D581_231_15

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 65 60 65

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T1 85 92 85 92

L 25 30 25 30 U1 93 93 93 93

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

34

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 86

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T1 107

H3 39.5 U1 93

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

35

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Manual override: without detent

Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_15

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T1 96

D 11 U1 93

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

36

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Electrical connector without standard (form B industry) Manual override: with detent
Standards Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:2000,with electrical connector/plug DC operating voltage Voltage tolerance DC Operational voltage AC at 50 Hz Voltage tolerance AC 50 Hz ISO 5599-1 Single plug-in wiring Single base plate principle -0.95 bar / 10 bar -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 65 24 V -10% / +10% 230 V, 110 V, 24 V -10% / +10%

P581_137

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

37

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Electrical connector without standard (form B industry) Manual override: with detent
Dimensions,all ports on bottom

D581_231_22

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 65 60 65

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T2 113 119 113 119

L 25 30 25 30 U2 70 70 70 70

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

38

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Electrical connector without standard (form B industry) Manual override: with detent
Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_22

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 81

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T2 134

H3 39.5 U2 68

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

39

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Electrical connector without standard (form B industry) Manual override: with detent
Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_22

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T2 124

D 11 U2 70

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

40

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: with detent

P581_138

Standards Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:2000,with electrical connector/plugSingle wire connection, Electrical connector DC operating voltage Voltage tolerance DC Operational voltage AC at 50 Hz Voltage tolerance AC 50 Hz

ISO 5599-1 Single plug-in wiring Single base plate principle -0.95 bar / 10 bar -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 65 24 V -10% / +10% 230 V -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

41

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: with detent

Dimensions,all ports on bottom

D581_231_30

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 64 60 64

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T3 100 101 100 101

L 25 30 25 30 U3 174 174 174 174

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

42

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: with detent

Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_30

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 81

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T3 121

H3 39.5 U3 174

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

43

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: with detent

Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_30

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T3 111

D 11 U3 174

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

44

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: without detent, without

P581_138

Standards Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:2000,with electrical connector/plugSingle wire connection, Electrical connector DC operating voltage Voltage tolerance DC Operational voltage AC at 50 Hz Voltage tolerance AC 50 Hz

ISO 5599-1 Single plug-in wiring Single base plate principle -0.95 bar / 16 bar -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 65 24 V -10% / +10% 230 V, 42 V -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

45

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: without detent, without

Dimensions,all ports on bottom

D581_231_30

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 64 60 64

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T3 100 101 100 101

L 25 30 25 30 U3 174 174 174 174

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

46

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: without detent, without

Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_30

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 81

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T3 121

H3 39.5 U3 174

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

47

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: without detent, without

Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_30

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T3 111

D 11 U3 174

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

48

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs Manual override: with detent
Standards Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:2000,with electrical connector/plug Number of valve positions DC operating voltage Voltage tolerance DC cable connection ISO 5599-1 Single plug-in wiring Single base plate principle -0.95 bar / 10 bar -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 65 20 24 V -10% / +10% 1m

P581_201

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

49

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs Manual override: with detent
Dimensions,all ports on bottom

D581_231_30

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 64 60 64

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T3 100 101 100 101

L 25 30 25 30 U3 174 174 174 174

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

50

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs Manual override: with detent
Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_30

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 81

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T3 121

H3 39.5 U3 174

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

51

Valve terminal system, Series 581

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Single wire connection, Contact bridge, with or without sensor inputs Manual override: with detent
Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_30

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T3 111

D 11 U3 174

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

52

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: with detent

P581_202

Standards Bus module Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air Protection class:,with plug Number of solenoid coils Supported field bus protocols:

Operational voltage electronics Electronics voltage tolerance

ISO 5599-1 C-design Field bus Single base plate principle -0.95 bar / 10 bar -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m IP 65 16 Profibus DP INTERBUS-S CANopen DeviceNet 24 V DC -10% / +10%

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Profibus DP, 128 inputs/outputs INTERBUS S, CANopen, DeviceNet, 64 inputs/outputs Bus module optionally included in scope of delivery, see the Internet configurator

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

53

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: with detent

Dimensions,all ports on bottom

D581_231_30

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 64 60 64

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 T3 100 101 100 101

L 25 30 25 30 U3 174 174 174 174

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

54

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: with detent

Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_30

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 81

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 T3 121

H3 39.5 U3 174

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

55

Valve terminal system, Series 581, size 1

Qn=1100 l/min Pilot valve width: 30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Manual override: with detent

Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_30

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 T3 111

D 11 U3 174

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

56

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min compressed air connection output: Base plate ISO 5599-1

Standards Version Blocking principle Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air

ISO 5599-1 pneumatically controlled Single base plate principle -0.95 bar / 16 bar -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m

An example configuration is illustrated. The delivered product may thus deviate from the illustration.
P581_134

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Configurable product This product is configurable. Please use our Internet configurator at www.boschrexroth.com/ pneumatics or contact the nearest Bosch Rexroth sales office.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

57

Valve terminal system, Series 581

Qn=1100 l/min compressed air connection output: Base plate ISO 5599-1

Dimensions,all ports on bottom

D581_231_pn

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5. An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/8 G 1/4 6 8 A G 1/8 G 1/4 6 8

B G 1/4 G 3/8 G 1/4 G 3/8 Q 14 15 14 15

C G 1/4 G 3/8 G 1/4 G 3/8

D G 1/8 G 1/8 4 6

E 22 27 22 27 S 60 65 60 65

F 28.5 40 28.5 40 V 72 94 72 94

G 9.5 12.5 9.5 12.5 X 5.4 6.4 5.4 6.4

H 29.5 26.5 29.5 26.5 Z 7 8 7 8

J 14.5 20 14.5 20 AA 8 10

K 100 122 100 122 U2 70 70 70 70

L 25 30 25 30

M 27 34 27 34

N 43 43 43 43

P (=M+Q) 41 49 41 49

R (=Q/2+MZ) 27.5 34 27.5 34

A = ports 2 and 4 in the intermediate plate B = port 1 in the supply plate C = ports 3 and 5 in the supply plate D = ports 12 and 14 in the intermediate plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

58

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Valve terminal system, Series 581

Qn=1100 l/min compressed air connection output: Base plate ISO 5599-1

Dimensions,ports 2 and 4 on bottom,Ports 12 and 14 on side

D581_232_pn

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 Q 21.5

C G 3/8 R 24.5

D G 1/8 S 81

E 28 V 28

G 13 X 7

H1 29 Z 11

H2 20 U2 70

H3 39.5

J 22

K 110

L 46

M 22

N 43

P 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

59

Valve terminal system, Series 581

Qn=1100 l/min compressed air connection output: Base plate ISO 5599-1

Dimensions,ports 2 and 4 on side,ports 12 and 14 on bottom

D581_233_pn

* n = Number of subbases An example configuration is illustrated. The delivered product may thus deviate from the illustration.

A G 1/4 A G 1/4

B G 3/8 P 43

B1 G 1/4 S 106

C 5.5 U2 70

D 11

E 71

F 32

G 22

H 92

J 24

R 17

K 12

M 12

N 36

O 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

60

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent

00130824

Standards Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Protective circuit Status displayLED Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 Spool valve external soft sealing Single base plate principle 0 bar / 8 bar -10C / +50C -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 67 Z-diode Protected against polarity reversal Green 100 % 15 ms 22 ms with hexagon socket 2 Nm

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 2.2

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

61

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent

MO

Operating voltage DC

Flow conductance C [l/(s*bar)] 3.2

Qn

Control pressure min./max. [bar] 3.5 / 8

Cable length

Weight

Part No.

[l/min] 950

NC/NC

24 V

[m] 0.35 0.5 0.7

[kg] 0.22 R402003703 R402003704 R402003705

MO = Manual override Connection 12 must be connected with atmospheres The valve must be supplied with compressed air via ports 3 and 5 Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

92,6

55,75

70

40

1) 3) 2)
00129352

Pin assignment 1) brown (+24 V) 2) green/yellow (ground) 3) blue (0 V)

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

38,8

62

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent

00130825

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Protective circuit Status displayLED Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -10C / +50C -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 67 Z-diode Protected against polarity reversal Green 100 % 15 ms 30 ms with hexagon socket 2 Nm

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 2.2

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

63

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent

MO

Operating voltage DC

Flow conductance C [l/(s*bar)] 5.2 5.2 5.2 5.2

Qn

Working pressure min./max. [bar] 3 / 10 3 / 10 -0.95 / 10 -0.95 / 10

Control pressure min./max. [bar] 3 / 10 3 / 10 3 / 10 3 / 10

Cable length

Weight

Note

Part No.

[l/min] 1400 1400 1400 1400

[m] 0.5 0.5 0.5 0.5

[kg] 0.18 0.18 0.18 0.18 1) 1); 3) 2) 2); 3) 5811150160 5811151160 5811152160 5811153160

24 V 24 V 24 V 24 V

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

46,3

55,75

70 1) 2) 3)

40

Pin assignment 1) brown (+24 V) 2) green/yellow (ground) 3) blue (0 V)

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

38,8
00129351

64

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent

00130826

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Protective circuit Status displayLED Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -10C / +50C -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 67 Z-diode Protected against polarity reversal Green 100 % 14 ms 14 ms with hexagon socket 2 Nm

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 2.2

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

65

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent

MO

Operating voltage DC

Flow conductance C [l/(s*bar)] 5.2 5.2 5.2 5.2

Qn

Working pressure min./max. [bar] 1.5 / 10 1.5 / 10 -0.95 / 10 -0.95 / 10

Control pressure min./max. [bar] 1.5 / 10 1.5 / 10 1.5 / 10 1.5 / 10

Cable length

Weight

Note

Part No.

[l/min] 1400 1400 1400 1400

[m] 0.5 0.5 0.5 0.5

[kg] 0.22 0.22 0.22 0.22 1) 1); 3) 2) 2); 3) 5811260160

24 V 24 V 24 V 24 V

5811261160

5811262160

5811263160

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

92,6

55,75

70

40

1) 3) 2)
00129352

Pin assignment 1) brown (+24 V) 2) green/yellow (ground) 3) blue (0 V)

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

38,8

66

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent

00130827

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Protective circuit Status displayLED Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -10C / +50C -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 67 Z-diode Protected against polarity reversal Green 100 % 14 ms 22 ms with hexagon socket 2 Nm

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 2.2

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

67

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent

MO

Operating voltage DC 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V

Flow conductance C [l/(s*bar)] 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3

Qn

Working pressure min./max. [bar] 3 / 10 3 / 10 -0.95 / 10 -0.95 / 10 3 / 10 3 / 10 -0.95 / 10 -0.95 / 10 3 / 10 3 / 10 -0.95 / 10 -0.95 / 10

Control pressure min./max. [bar] 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10

Cable length

Weight

Note

Part No.

[l/min] 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100

[m] 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

[kg] 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 1) 1); 3) 2) 2); 3) 1) 1); 3) 2) 2); 3) 1) 1); 3) 2) 2); 3) 5811460160 5811461160 5811462160 5811463160 5811560160 5811561160 5811562160 5811563160 5811760160 5811761160 5811762160 5811763160

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

68

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, 3-pin Manual override: without detent

Dimensions

92,6

55,75

70

40

1) 3) 2)
00129352

Pin assignment 1) brown (+24 V) 2) green/yellow (ground) 3) blue (0 V)

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

38,8

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

69

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

00130830

Standards Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 Spool valve external soft sealing Single base plate principle 0 bar / 8 bar -10C / +50C -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 22 ms with hexagon socket 2 Nm

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 2

MO

Operating voltage DC

Flow conductance C [l/(s*bar)]

Qn

Control pressure min./max. [bar] 3.5 / 8

Weight

Part No.

[l/min] 950

[kg] 0.22 R402003702

NC/NC

24 V

3.2

MO = Manual override Connection 12 must be connected with atmospheres The valve must be supplied with compressed air via ports 3 and 5 Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

70

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

Dimensions

15 82,2 8

59,5

70

40
00130280

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

38,8

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

71

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports
00130829

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -10C / +50C -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 30 ms with hexagon socket 2 Nm

Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque

Materials: Housing Seals

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 2

MO

Operating voltage DC

Flow conductance C [l/(s*bar)] 5.2

Qn

Working pressure min./max. [bar] 3 / 10

Control pressure min./max. [bar] 3 / 10

Weight

Note

Part No.

[l/min] 1400

[kg] 0.18 1) 5811150130

24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

72

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

MO

Operating voltage DC

Flow conductance C [l/(s*bar)] 5.2 5.2 5.2

Qn

Working pressure min./max. [bar] 3 / 10 -0.95 / 10 -0.95 / 10

Control pressure min./max. [bar] 3 / 10 3 / 10 3 / 10

Weight

Note

Part No.

[l/min] 1400 1400 1400

[kg] 0.18 0.18 0.18 1); 3) 2) 2); 3) 5811151130 5811152130 5811153130

24 V 24 V 24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

15 41,1 8

59,5

70

40
00130281

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

38,8

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

73

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports
00130831

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -10C / +50C -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 14 ms 14 ms with hexagon socket 2 Nm

Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque

Materials: Housing Seals

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 2

MO

Operating voltage DC

Flow conductance C [l/(s*bar)] 5.2

Qn

Working pressure min./max. [bar] 1.5 / 10

Control pressure min./max. [bar] 1.5 / 10

Weight

Note

Part No.

[l/min] 1400

[kg] 0.22 1) 5811260130

24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

74

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

MO

Operating voltage DC

Flow conductance C [l/(s*bar)] 5.2 5.2 5.2

Qn

Working pressure min./max. [bar] 1.5 / 10 -0.95 / 10 -0.95 / 10

Control pressure min./max. [bar] 1.5 / 10 1.5 / 10 1.5 / 10

Weight

Note

Part No.

[l/min] 1400 1400 1400

[kg] 0.22 0.22 0.22 1); 3) 2) 2); 3) 5811261130

24 V 24 V 24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar

5811262130

5811263130

Dimensions

15 82,2 8

59,5

70

40
00130280

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

38,8

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

75

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports
00130831

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -10C / +50C -10C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 14 ms 22 ms with hexagon socket 2 Nm

Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque

Materials: Housing Seals

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 2

MO

Operating voltage DC 24 V 24 V

Flow conductance C [l/(s*bar)] 4.3 4.3

Qn

Working pressure min./max. [bar] 3 / 10 3 / 10

Control pressure min./max. [bar] 3 / 10 3 / 10

Weight

Note

Part No.

[l/min] 1100 1100

[kg] 0.22 0.22 1) 1); 3) 5811460130 5811461130

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

76

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

MO

Operating voltage DC 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V

Flow conductance C [l/(s*bar)] 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3

Qn

Working pressure min./max. [bar] -0.95 / 10 -0.95 / 10 3 / 10 3 / 10 -0.95 / 10 -0.95 / 10 3 / 10 3 / 10 -0.95 / 10 -0.95 / 10

Control pressure min./max. [bar] 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10

Weight

Note

Part No.

[l/min] 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100

[kg] 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 2) 2); 3) 1) 1); 3) 2) 2); 3) 1) 1); 3) 2) 2); 3) 5811462130 5811463130 5811560130 5811561130 5811562130 5811563130 5811760130 5811761130 5811762130 5811763130

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

77

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 15 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 15217, form C Manual override: without detent

Dimensions

15 82,2 8

59,5

70

40
00130280

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

38,8

78

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

00130832

Standards Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 Spool valve external soft sealing Single base plate principle 0 bar / 8 bar -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 12 ms 22 ms with hexagon socket 2 Nm

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz

AC 60 Hz

DC

Voltage tolerance AC 50 Hz

AC 60 Hz

Power consumption DC W 5 5 5 -

12 V 24 V 48 V -

24 V 230 V

110 V -

-10% / +10% -10% / +10% -10% / +10% -

-10% / +10% -10% / +10%

-10% / +10% -

Switch-on Holding power power AC 50 AC 60 AC 50 AC 60 Hz Hz Hz Hz VA VA VA VA 10 8 10 8 10 8 -

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

79

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

MO DC

Operating voltage AC 50 Hz 24 V 230 V AC 60 Hz 110 V -

Flow conductance C [l/(s*bar)]

Qn

Control Weight pressure min./max.

Note

Part No.

NC/NC

12 V 24 V 48 V -

[l/min]

[bar]

[kg]

3.2

950

3.5 / 8

0.3

1)

R402003714 R402003711 R402003710 R402003715 R402003712 R402003713 R402003709

MO = Manual override 1)Basic valve without coil The valve must be supplied with compressed air via ports 3 and 5 Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

17

34

40 22

87,5 35,2

5,3

70
00132624

The pilot valves can be loosened and turned through 180.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

80

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports
00130833

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 12 ms 25 ms with hexagon socket 2 Nm

Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque

Materials: Housing Seals

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz

AC 60 Hz

DC

Voltage tolerance AC 50 Hz

AC 60 Hz

Power consumption DC W 5 5 5 -

12 V 24 V 48 V -

24 V 230 V

110 V -

-10% / +10% -10% / +10% -10% / +10% -

-10% / +10% -10% / +10%

-10% / +10% -

Switch-on Holding power power AC 50 AC 60 AC 50 AC 60 Hz Hz Hz Hz VA VA VA VA 10 8 10 8 10 8 -

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

81

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

MO

Operating voltage DC AC 50 Hz 24 V 230 V 24 V 230 V 24 V 230 V 24 V 230 V AC 60 Hz 110 V 110 V 110 V 110 V -

Flow conductance C [l/(s*bar)]

Qn

Working pressure min./ max.

Control Weight pressure min./ max.

Note

Part No.

12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V 12 V 48 V 24 V -

[l/min]

[bar]

[bar]

[kg] 5811110500 5811110200 5811110100 5811110600 5811110300 5811110400 5811110000 5811111500 5811111200 5811111100 5811111600 5811111300 5811111400 5811111000 5811112500 5811112200 5811112100 5811112600 5811112300 5811112400 5811112000 5811113500 5811113200 5811113600 5811113100 5811113300 5811113400 5811113000

5.2

1400

3 / 10

3 / 10

0.23

1)

5.2

1400

3 / 10

3 / 10

0.23

1); 3)

5.2

1400

3 / 10

3 / 10

0.23

1); 4)

5.2

1400

3 / 10

3 / 10

0.23 1); 3); 4)

5.2

1400

-0.95 / 10

3 / 10

0.23

2)

5.2

1400

-0.95 / 10

3 / 10

0.23

2); 3)

5.2

1400

-0.95 / 10

3 / 10

0.23

2); 4)

5.2

1400

-0.95 / 10

3 / 10

0.23 2); 3); 4)

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)Basic valve without coil 4)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

82

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

Dimensions

17

52

40 22

87,5

35,2

5,3

70
00132622

The pilot valves can be loosened and turned through 180.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

83

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports
00132080

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 13 ms 13 ms with hexagon socket 2 Nm

Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque

Materials: Housing Seals

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz

AC 60 Hz

DC

Voltage tolerance AC 50 Hz

AC 60 Hz

Power consumption DC W 5 5 5 -

12 V 24 V 48 V -

24 V 230 V

110 V -

-10% / +10% -10% / +10% -10% / +10% -

-10% / +10% -10% / +10%

-10% / +10% -

Switch-on Holding power power AC 50 AC 60 AC 50 AC 60 Hz Hz Hz Hz VA VA VA VA 10 8 10 8 10 8 -

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

84

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

MO

Operating voltage DC AC 50 Hz 24 V 230 V 24 V 230 V 24 V 230 V 24 V 230 V AC 60 Hz 110 V 110 V 110 V 110 V -

Flow conductance C [l/(s*bar)]

Qn

Working pressure min./ max.

Control Weight pressure min./ max.

Note

Part No.

12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V -

[l/min]

[bar]

[bar]

[kg] 5811220500 5811220200 5811220100 5811220600 5811220300 5811220400 5811220000 5811221500 5811221200 5811221100 5811221600 5811221300 5811221400 5811221000 5811222500 5811222200 5811222100 5811222600 5811222300 5811222400 5811222000 5811223500 5811223200 5811223100 5811223600 5811223300 5811223400 5811223000

5.2

1400

1.5 / 10

1.5 / 10

0.3

1)

5.2

1400

1.5 / 10

1.5 / 10

0.3

1); 3)

5.2

1400

1.5 / 10

1.5 / 10

0.3

1); 4)

5.2

1400

1.5 / 10

1.5 / 10

0.3 1); 3); 4)

5.2

1400

-0.95 / 10

1.5 / 10

0.3

2)

5.2

1400

-0.95 / 10

1.5 / 10

0.3

2); 3)

5.2

1400

-0.95 / 10

1.5 / 10

0.3

2); 4)

5.2

1400

-0.95 / 10

1.5 / 10

0.3 2); 3); 4)

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)Basic valve without coil 4)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

85

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent

Dimensions

17

34

40 22

87,5 35,2

5,3

70
00132624

The pilot valves can be loosened and turned through 180.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

86

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent with differential piston

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports
00132139

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 12 ms 25 ms with hexagon socket 2 Nm

Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque

Materials: Housing Seals

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz

AC 60 Hz

DC

Voltage tolerance AC 50 Hz

AC 60 Hz

Power consumption DC W 5 5 5 -

12 V 24 V 48 V -

24 V 230 V

110 V -

-10% / +10% -10% / +10% -10% / +10% -

-10% / +10% -10% / +10%

-10% / +10% -

Switch-on Holding power power AC 50 AC 60 AC 50 AC 60 Hz Hz Hz Hz VA VA VA VA 10 8 10 8 10 8 -

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

87

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent with differential piston

MO

Operating voltage DC AC 50 Hz 24 V 230 V 24 V 230 V 24 V 230 V 24 V 230 V AC 60 Hz 110 V 110 V 110 V 110 V -

Flow conductance C [l/(s*bar)]

Qn

Working pressure min./ max.

Control Weight pressure min./ max.

Note

Part No.

12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V -

[l/min]

[bar]

[bar]

[kg] 5811610500 5811610200 5811610100 5811610600 5811610300 5811610400 5811610000 5811611500 5811611200 5811611100 5811611600 5811611300 5811611400 5811611000 5811612500 5811612200 5811612100 5811612600 5811612300 5811612400 5811612000 5811613500 5811613200 5811613100 5811613600 5811613300 5811613400 5811613000

5.2

1400

1.3 / 10

1.3 / 10

0.26

1)

5.2

1400

1.3 / 10

1.3 / 10

0.26

1); 3)

5.2

1400

1.3 / 10

1.3 / 10

0.26

1); 4)

5.2

1400

1.3 / 10

1.3 / 10

0.26 1); 3); 4)

5.2

1400

-0.95 / 10

1.3 / 10

0.26

2)

5.2

1400

-0.95 / 10

1.3 / 10

0.26

2); 3)

5.2

1400

-0.95 / 10

1.3 / 10

0.26

2); 4)

5.2

1400

-0.95 / 10

1.3 / 10

0.26 2); 3); 4)

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)Basic valve without coil 4)with throttle Differential piston, signal 14 has priority Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

88

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent with differential piston

Dimensions

17

52

40 22

87,5

35,2

26

5,3
27,5
The pilot valves can be loosened and turned through 180.

70
00132623

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

89

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent closed center

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports
00132140

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 22 ms with hexagon socket 2 Nm

Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque

Materials: Housing Seals

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz

AC 60 Hz

DC

Voltage tolerance AC 50 Hz

AC 60 Hz

Power consumption DC W 5 5 5 -

12 V 24 V 48 V -

24 V 230 V

110 V -

-10% / +10% -10% / +10% -10% / +10% -

-10% / +10% -10% / +10%

-10% / +10% -

Switch-on Holding power power AC 50 AC 60 AC 50 AC 60 Hz Hz Hz Hz VA VA VA VA 10 8 10 8 10 8 -

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

90

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent closed center

MO

Operating voltage DC AC 50 Hz 24 V 230 V 24 V 230 V 24 V 230 V 24 V 230 V AC 60 Hz 110 V 110 V 110 V 110 V -

Flow conductance C [l/(s*bar)]

Qn

Working pressure min./ max.

Control Weight pressure min./ max.

Note

Part No.

12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V -

[l/min]

[bar]

[bar]

[kg] 5811420500 5811420200 5811420100 5811420600 5811420300 5811420400 5811420000 5811421500 5811421200 5811421100 5811421600 5811421300 5811421400 5811421000 5811422500 5811422200 5811422100 5811422600 5811422300 5811422400 5811422000 5811423500 5811423200 5811423100 5811423600 5811423300 5811423400 5811423000

4.3

1100

3 / 10

3 / 10

0.3

1)

4.3

1100

3 / 10

3 / 10

0.3

1); 3)

4.3

1100

3 / 10

3 / 10

0.3

1); 4)

4.3

1100

3 / 10

3 / 10

0.3 1); 3); 4)

4.3

1100

-0.95 / 10

3 / 10

0.3

2)

4.3

1100

-0.95 / 10

3 / 10

0.3

2); 3)

4.3

1100

-0.95 / 10

3 / 10

0.3

2); 4)

4.3

1100

-0.95 / 10

3 / 10

0.3 2); 3); 4)

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)Basic valve without coil 4)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

91

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent closed center

Dimensions

17

34

40 22

87,5 35,2

5,3

70
00132624

The pilot valves can be loosened and turned through 180.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

92

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent exhausted center

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports
00132141

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 22 ms with hexagon socket 2 Nm

Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque

Materials: Housing Seals

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz

AC 60 Hz

DC

Voltage tolerance AC 50 Hz

AC 60 Hz

Power consumption DC W 5 5 5 -

12 V 24 V 48 V -

24 V 230 V

110 V -

-10% / +10% -10% / +10% -10% / +10% -

-10% / +10% -10% / +10%

-10% / +10% -

Switch-on Holding power power AC 50 AC 60 AC 50 AC 60 Hz Hz Hz Hz VA VA VA VA 10 8 10 8 10 8 -

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

93

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent exhausted center

MO

Operating voltage DC AC 50 Hz 24 V 230 V 24 V 230 V 24 V 230 V 24 V 230 V AC 60 Hz 110 V 110 V 110 V 110 V -

Flow conductance C [l/(s*bar)]

Qn

Working pressure min./ max.

Control Weight pressure min./ max.

Note

Part No.

12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V -

[l/min]

[bar]

[bar]

[kg] 5811520500 5811520200 5811520100 5811520600 5811520300 5811520400 5811520000 5811521500 5811521200 5811521100 5811521600 5811521300 5811521400 5811521000 5811522500 5811522200 5811522100 5811522600 5811522300 5811522400 5811522000 5811523500 5811523200 5811523100 5811523600 5811523300 5811523400 5811523000

4.3

1100

3 / 10

3 / 10

0.3

1)

4.3

1100

3 / 10

3 / 10

0.3

1); 3)

4.3

1100

3 / 10

3 / 10

0.3

1); 4)

4.3

1100

3 / 10

3 / 10

0.3 1); 3); 4)

4.3

1100

-0.95 / 10

3 / 10

0.3

2)

4.3

1100

-0.95 / 10

3 / 10

0.3

2); 3)

4.3

1100

-0.95 / 10

3 / 10

0.3

2); 4)

4.3

1100

-0.95 / 10

3 / 10

0.3 2); 3); 4)

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)Basic valve without coil 4)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

94

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent exhausted center

Dimensions

17

34

40 22

87,5 35,2

5,3

70
00132624

The pilot valves can be loosened and turned through 180.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

95

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent pressurized center

Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports
00132142

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 22 ms with hexagon socket 2 Nm

Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque

Materials: Housing Seals

Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz

AC 60 Hz

DC

Voltage tolerance AC 50 Hz

AC 60 Hz

Power consumption DC W 5 5 5 -

12 V 24 V 48 V -

24 V 230 V

110 V -

-10% / +10% -10% / +10% -10% / +10% -

-10% / +10% -10% / +10%

-10% / +10% -

Switch-on Holding power power AC 50 AC 60 AC 50 AC 60 Hz Hz Hz Hz VA VA VA VA 10 8 10 8 10 8 -

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

96

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent pressurized center

MO

Operating voltage DC AC 50 Hz 24 V 230 V 24 V 230 V 24 V 230 V 24 V 230 V 230 V AC 60 Hz 110 V 110 V 110 V 110 V -

Flow conductance C [l/(s*bar)]

Qn

Working pressure min./ max.

Control Weight pressure min./ max.

Note

Part No.

12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V -

[l/min]

[bar]

[bar]

[kg] 5811720500 5811720200 5811720100 5811720600 5811720300 5811720400 5811720000 5811721500 5811721200 5811721100 5811721600 5811721300 5811721400 5811721000 5811722500 5811722200 5811722100 5811722600 5811722300 5811722400 5811722000 5811723500 5811723200 5811723100 5811723600 5811723300 5811723400 5811723000

4.3

1100

3 / 10

3 / 10

0.3

1)

4.3

1100

3 / 10

3 / 10

0.3

1); 3)

4.3

1100

3 / 10

3 / 10

0.3

1); 4)

4.3

1100

3 / 10

3 / 10

0.3 1); 3); 4)

4.3

1100

-0.95 / 10

3 / 10

0.3

2)

4.3

1100

-0.95 / 10

3 / 10

0.3

2); 3)

4.3

1100

-0.95 / 10

3 / 10

0.3

2); 4)

4.3

1100

-0.95 / 10

3 / 10

0.3 2); 3); 4)

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)Basic valve without coil 4)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

97

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 22 mm compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, Form B, industry Manual override: with detent pressurized center

Dimensions

17

34

40 22

87,5 35,2

5,3

70
00132624

The pilot valves can be loosened and turned through 180.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

98

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Standards Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve external soft sealing Single base plate principle 0 bar / 8 bar -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 12 ms 29 ms with hexagon socket 2 Nm

00132143

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 42 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% -10% / +10% DC

-10% / +10% -

W 6.7 -

Switch-on power AC 50 Hz VA 12 15.2

Holding power AC 50 Hz VA 7.7 10.8

MO

Operating voltage DC 24 V AC 50 Hz 42 V 230 V

Flow conductance C [l/(s*bar)] 3.2

Qn

Control pressure min./max. [bar] 3.5 / 8

Weight

Part No.

[l/min] 950

[kg] R402003717 0.5 R402003716

NC/NC

MO = Manual override The valve must be supplied with compressed air via ports 3 and 5 Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

99

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Dimensions

174

30 18

74,8

38

14

70

14

40
00130278

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

100

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 28 ms with hexagon socket 2 Nm

00132144

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 42 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% -10% / +10% DC

-10% / +10% -

W 6.7 -

Switch-on power AC 50 Hz VA 12 15.2

Holding power AC 50 Hz VA 7.7 10.8

MO

Operating voltage DC AC 50 Hz 42 V 230 V

Flow conductance C [l/(s*bar)] 5.2

Qn

Working pressure min./max.

Control pressure min./max.

Weight

Note

Part No.

24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

[l/min] 1400

[bar] 3 / 16

[bar] 3 / 16

[kg] 0.35 1) 5811170540 5811170440

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

101

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
MO Operating voltage DC AC 50 Hz 42 V 230 V 42 V 230 V 42 V 230 V Flow conductance C [l/(s*bar)] 5.2 [l/min] 1400 Qn Working pressure min./max. Control pressure min./max. Weight Note Part No.

24 V 24 V 24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

[bar] 3 / 16

[bar] 3 / 16

[kg] 0.35 1); 3) 5811171540 5811171440 5811172540 5811172440 5811173540 5811173440

5.2

1400

-0.95 / 16

3 / 16

0.35

2)

5.2

1400

-0.95 / 16

3 / 16

0.35

2); 3)

Dimensions

87

30 18

74,8

38

10

14

70

14

40
00130279

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

102

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 13 ms 13 ms with hexagon socket 2 Nm

00132145

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 42 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% -10% / +10% DC

-10% / +10% -

W 6.7 -

Switch-on power AC 50 Hz VA 12 15.2

Holding power AC 50 Hz VA 7.7 10.8

MO

Operating voltage DC AC 50 Hz 42 V 230 V

Flow conductance C [l/(s*bar)] 5.2

Qn

Working pressure min./max.

Control pressure min./max.

Weight

Note

Part No.

24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

[l/min] 1400

[bar] 1.5 / 16

[bar] 1.5 / 16

[kg] 0.5 1) 5811290540 5811290440

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

103

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
MO Operating voltage DC AC 50 Hz 42 V 230 V 42 V 230 V 42 V 230 V Flow conductance C [l/(s*bar)] 5.2 5.2 5.2 [l/min] 1400 1400 1400 Qn Working pressure min./max. Control pressure min./max. Weight Note Part No.

24 V 24 V 24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

[bar] 1.5 / 16 -0.95 / 16 -0.95 / 16

[bar] 1.5 / 16 1.5 / 16 1.5 / 16

[kg] 0.5 0.5 0.5 1); 3) 2) 2); 3) 5811291540 5811291440 5811292540 5811292440 5811293540 5811293440

Dimensions

174

30 18

74,8

38

14

70

14

40
00130278

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

104

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent with differential piston
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 28 ms with hexagon socket 2 Nm

00132146

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 42 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% -10% / +10% DC

-10% / +10% -

W 6.7 -

Switch-on power AC 50 Hz VA 12 15.2

Holding power AC 50 Hz VA 7.7 10.8

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

105

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent with differential piston
MO Operating voltage DC AC 50 Hz 42 V 230 V 42 V 230 V 42 V 230 V 42 V 230 V Flow conductance C [l/(s*bar)] 5.2 5.2 5.2 5.2 [l/min] 1400 1400 1400 1400 Qn Working pressure min./max. Control pressure min./max. Weight Note Part No.

24 V 24 V 24 V 24 V -

[bar] 1.3 / 16 1.3 / 16 -0.95 / 16 -0.95 / 16

[bar] 1.3 / 16 1.3 / 16 1.3 / 16 1.3 / 16

[kg] 0.38 0.38 0.38 0.38 1) 1); 3) 2) 2); 3) 5811670540 5811670440 5811671540 5811671440 5811672540 5811672440 5811673540 5811673440

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Differential piston, signal 14 has priority The minimum pilot pressure at port 14 is dependent on the pressure in port 1. Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

87

30 18

74,8

26

38

10

27,5

70

14

40
00132620

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

106

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 14 ms 28 ms with hexagon socket 2 Nm

00132147

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 42 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% -10% / +10% DC

-10% / +10% -

W 6.7 -

Switch-on power AC 50 Hz VA 12 15.2

Holding power AC 50 Hz VA 7.7 10.8

MO

Operating voltage DC AC 50 Hz 42 V 230 V

Flow conductance C [l/(s*bar)] 4.3

Qn

Working pressure min./max.

Control pressure min./max.

Weight

Note

Part No.

24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

[l/min] 1100

[bar] 3 / 16

[bar] 3 / 16

[kg] 0.5 1) 5811490540 5811490440

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

107

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
MO Operating voltage DC AC 50 Hz 42 V 230 V 42 V 230 V 42 V 230 V 42 V 230 V 42 V 230 V 42 V 230 V 42 V 230 V 42 V 230 V 42 V 230 V 42 V 230 V 42 V 230 V Flow conductance C [l/(s*bar)] 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 [l/min] 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 Qn Working pressure min./max. Control pressure min./max. Weight Note Part No.

24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

[bar] 3 / 16 -0.95 / 16 -0.95 / 16 3 / 16 3 / 16 -0.95 / 16 -0.95 / 16 3 / 16 3 / 16 -0.95 / 16 -0.95 / 16

[bar] 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16

[kg] 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1); 3) 2) 2); 3) 1) 1); 3) 2) 2); 3) 1) 1); 3) 2) 2); 3) 5811491540 5811491440 5811492540 5811492440 5811493540 5811493440 5811590540 5811590440 5811591540 5811591440 5811592540 5811592440 5811593540 5811593440 5811790540 5811790440 5811791540 5811791440 5811792540 5811792440 5811793540 5811793440

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

108

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Dimensions

174

30 18

74,8

38

14

70

14

40
00130278

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

109

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent
Standards Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve external soft sealing Single base plate principle 0 bar / 8 bar -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 12 ms 29 ms with hexagon socket 2 Nm

00132148

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -

W 2 -

Switch-on power AC 50 Hz VA 7

Holding power AC 50 Hz VA 4.8

MO

Operating voltage DC AC 50 Hz 230 V

Flow conductance C [l/(s*bar)] 3.2

Qn

Control Compatibility pressure index min./max.

Weight

Part No.

[l/min] 950

[bar] 3.5 / 8 14

[kg] 0.5 R402003719 R402003718

NC/NC

24 V -

MO = Manual override The valve must be supplied with compressed air via ports 3 and 5 Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

110

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent
Dimensions

174

30 18

74,8

38

14

70

14

40
00130278

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

111

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 28 ms with hexagon socket 2 Nm

00132149

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -

W 2 -

Switch-on power AC 50 Hz VA 7

Holding power AC 50 Hz VA 4.8

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

112

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent
MO Operating voltage DC AC 50 Hz 230 V 230 V 230 V 230 V 5.2 1400 -0.95 / 10 3 / 10 14 0.35 1); 3); 4) 5.2 1400 -0.95 / 10 3 / 10 14 0.35 5.2 1400 3 / 10 3 / 10 14 0.35 1); 2); 4) Flow conductance C [l/(s*bar)] 5.2 [l/min] 1400 Qn Working Control pressure pressure min./ min./ max. max. Compatibility index Note Part No.

[bar] 3 / 10

[bar] 3 / 10 14

[kg] 0.35 1); 2) 5811170650 5811170450 5811171650 5811171450 5811172650 5811172450 5811173650 5811173450

24 V 24 V 24 V 24 V -

1); 3)

MO = Manual override 1) A working pressure of up to 16bar is possible in the version with manual override without detent. 2)Pilot:internal 3)Pilot:external 4)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

87

30 18

74,8

38

10

14

70

14

40
00130279

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

113

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 13 ms 13 ms with hexagon socket 2 Nm

00132150

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -

W 2 -

Switch-on power AC 50 Hz VA 7

Holding power AC 50 Hz VA 4.8

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

114

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent
MO Operating voltage DC AC 50 Hz 230 V 230 V 230 V 230 V 5.2 1400 -0.95 / 10 1.5 / 10 14 0.5 1); 3); 4) 5.2 1400 -0.95 / 10 1.5 / 10 14 0.5 5.2 1400 1.5 / 10 1.5 / 10 14 0.5 1); 2); 4) Flow conductance C [l/(s*bar)] 5.2 [l/min] 1400 Qn Working Control pressure pressure min./ min./ max. max. Compatibility index Note Part No.

[bar] 1.5 / 10

[bar] 1.5 / 10 14

[kg] 0.5 1); 2) 5811290650 5811290450 5811291650 5811291450 5811292650 5811292450 5811293650 5811293450

24 V 24 V 24 V 24 V -

1); 3)

MO = Manual override 1) A working pressure of up to 16bar is possible in the version with manual override without detent. 2)Pilot:internal 3)Pilot:external 4)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

174

30 18

74,8

38

14

70

14

40
00130278

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

115

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent with differential piston
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 28 ms with hexagon socket 2 Nm

00132151

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -

W 2 -

Switch-on power AC 50 Hz VA 7

Holding power AC 50 Hz VA 4.8

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

116

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent with differential piston
MO Operating voltage DC AC 50 Hz 230 V 230 V 230 V 230 V 5.2 1400 -0.95 / 10 1.3 / 10 14 0.38 1); 3); 4) 5.2 1400 -0.95 / 10 1.3 / 10 14 0.38 5.2 1400 1.3 / 10 1.3 / 10 14 0.38 1); 2); 4) Flow conductance C [l/(s*bar)] 5.2 [l/min] 1400 Qn Working Control pressure pressure min./ min./ max. max. Compatibility index Note Part No.

[bar] 1.3 / 10

[bar] 1.3 / 10 14

[kg] 0.38 1); 2) 5811670650 5811670450 5811671650 5811671450 5811672650 5811672450 5811673650 5811673450

24 V 24 V 24 V 24 V -

1); 3)

MO = Manual override 1) A working pressure of up to 16bar is possible in the version with manual override without detent. 2)Pilot:internal 3)Pilot:external 4)with throttle Differential piston, signal 14 has priority The minimum pilot pressure at port 14 is dependent on the pressure in port 1. Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

87

30 18

74,8

26

38

10

27,5

70

14

40
00132620

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

117

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 14 ms 28 ms with hexagon socket 2 Nm

00132152

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -

W 2 -

Switch-on power AC 50 Hz VA 7

Holding power AC 50 Hz VA 4.8

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

118

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent
MO Operating voltage DC AC 50 Hz 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 4.3 1100 -0.95 / 10 3 / 10 14 0.5 1); 3); 4) 4.3 1100 -0.95 / 10 3 / 10 14 0.5 4.3 1100 3 / 10 3 / 10 14 0.5 1); 2); 4) 4.3 1100 3 / 10 3 / 10 14 0.5 4.3 1100 -0.95 / 10 3 / 10 14 0.5 1); 3); 4) 4.3 1100 -0.95 / 10 3 / 10 14 0.5 4.3 1100 3 / 10 3 / 10 14 0.5 1); 2); 4) 4.3 1100 3 / 10 3 / 10 14 0.5 4.3 1100 -0.95 / 10 3 / 10 14 0.5 1); 3); 4) 4.3 1100 -0.95 / 10 3 / 10 14 0.5 4.3 1100 3 / 10 3 / 10 14 0.5 1); 2); 4) Flow conductance C [l/(s*bar)] 4.3 [l/min] 1100 Qn Working Control pressure pressure min./ min./ max. max. Compatibility index Note Part No.

[bar] 3 / 10

[bar] 3 / 10 14

[kg] 0.5 1); 2) 5811490650 5811490450 5811491650 5811491450 5811492650 5811492450 5811493650 5811493450 5811590650 5811590450 5811591650 5811591450 5811592650 5811592450 5811593650 5811593450 5811790650 5811790450 5811791650 5811791450 5811792650 5811792450 5811793650 5811793450

24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V -

1); 3)

1); 2)

1); 3)

1); 2)

1); 3)

MO = Manual override 1) A working pressure of up to 16bar is possible in the version with manual override without detent. 2)Pilot:internal 3)Pilot:external 4)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

119

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: with detent, without detent
Dimensions

174

30 18

74,8

38

14

70

14

40
00130278

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

120

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without
Standards Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve external soft sealing Single base plate principle 0 bar / 8 bar -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 12 ms 29 ms with hexagon socket 2 Nm

00132155

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -

W 6.7 -

Switch-on power AC 50 Hz VA 15.2

Holding power AC 50 Hz VA 10.8

Operating voltage DC 24 V NC/NC AC 50 Hz 230 V

Flow conductance C [l/(s*bar)] 3.2

Qn

Control pressure min./max. [bar] 3.5 / 8

Weight

Part No.

[l/min] 950

[kg] R402003721 0.5 R402003720

The valve must be supplied with compressed air via ports 3 and 5 Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

121

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without
Dimensions

174

30 18

74,8

38

14

70

14

40
00130278

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

122

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 28 ms with hexagon socket 2 Nm

00132154

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -

W 6.7 -

Switch-on power AC 50 Hz VA 15.2

Holding power AC 50 Hz VA 10.8

Operating voltage DC 24 V 24 V AC 50 Hz 230 V 230 V

Flow conductance C [l/(s*bar)] 5.2

Qn

Working pressure min./max. [bar] 3 / 16

Control pressure min./max. [bar] 3 / 16

Weight

Note

Part No.

[l/min] 1400

[kg] 0.35 1) 5811170530 5811170430 5811171530 5811171430

5.2

1400

3 / 16

3 / 16

0.35

1); 3)

1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

123

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without
Operating voltage DC 24 V 24 V AC 50 Hz 230 V 230 V Flow conductance C [l/(s*bar)] 5.2 Qn Working pressure min./max. [bar] -0.95 / 16 Control pressure min./max. [bar] 3 / 16 Weight Note Part No.

[l/min] 1400

[kg] 0.35 2) 5811172530 5811172430 5811173530 5811173430

5.2

1400

-0.95 / 16

3 / 16

0.35

2); 3)

1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

87

30 18

74,8

38

10

14

70

14

40
00130279

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

124

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 13 ms 13 ms with hexagon socket 2 Nm

00132155

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -

W 6.7 -

Switch-on power AC 50 Hz VA 15.2

Holding power AC 50 Hz VA 10.8

Operating voltage DC 24 V AC 50 Hz 230 V

Flow conductance C [l/(s*bar)] 5.2 5.2

Qn

Working pressure min./max. [bar] 1.5 / 16 1.5 / 16

Control pressure min./max. [bar] 1.5 / 16 1.5 / 16

Weight

Note

Part No.

[l/min] 1400 1400

[kg] 0.5 0.5 1) 1) 5811290530 5811290430

1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

125

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without
Operating voltage DC 24 V 24 V 24 V AC 50 Hz 230 V 230 V 230 V Flow conductance C [l/(s*bar)] 5.2 5.2 5.2 5.2 Qn Working pressure min./max. [bar] 1.5 / 16 1.5 / 16 -0.95 / 16 -0.95 / 16 Control pressure min./max. [bar] 1.5 / 16 1.5 / 16 1.5 / 16 1.5 / 16 Weight Note Part No.

[l/min] 1400 1400 1400 1400

[kg] 0.5 0.5 0.5 0.5 1); 3) 1); 3) 2) 2); 3) 5811291530 5811291430 5811292530 5811292430 5811293530 5811293430

1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

174

30 18

74,8

38

14

70

14

40
00130278

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

126

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without with differential piston
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 28 ms with hexagon socket 2 Nm

00132156

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -

W 6.7 -

Switch-on power AC 50 Hz VA 15.2

Holding power AC 50 Hz VA 10.8

Operating voltage DC 24 V AC 50 Hz 230 V

Flow conductance C [l/(s*bar)] 5.2

Qn

Working pressure min./max. [bar] 1.3 / 16

Control pressure min./max. [bar] 1.3 / 16

Weight

Note

Part No.

[l/min] 1400

[kg] 0.38 1) 5811670530 5811670430

1)Pilot:internal 2)Pilot:external 3)with throttle Differential piston, signal 14 has priority The minimum pilot pressure at port 14 is dependent on the pressure in port 1. Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

127

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without with differential piston
Operating voltage DC 24 V 24 V 24 V AC 50 Hz 230 V 230 V 230 V Flow conductance C [l/(s*bar)] 5.2 5.2 5.2 Qn Working pressure min./max. [bar] 1.3 / 16 -0.95 / 16 -0.95 / 16 Control pressure min./max. [bar] 1.3 / 16 1.3 / 16 1.3 / 16 Weight Note Part No.

[l/min] 1400 1400 1400

[kg] 0.38 0.38 0.38 1); 3) 2) 2); 3) 5811671530 5811671430 5811672530 5811672430 5811673530 5811673430

1)Pilot:internal 2)Pilot:external 3)with throttle Differential piston, signal 14 has priority The minimum pilot pressure at port 14 is dependent on the pressure in port 1. Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

87

30 18

74,8

26

38

10

27,5

70

14

40
00132620

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

128

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 14 ms 28 ms with hexagon socket 2 Nm

00132157

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -

W 6.7 -

Switch-on power AC 50 Hz VA 15.2

Holding power AC 50 Hz VA 10.8

Operating voltage DC 24 V 24 V AC 50 Hz 230 V 230 V

Flow conductance C [l/(s*bar)] 4.3 4.3

Qn

Working pressure min./max. [bar] 3 / 16 3 / 16

Control pressure min./max. [bar] 3 / 16 3 / 16

Weight

Note

Part No.

[l/min] 1100 1100

[kg] 0.5 0.5 1) 1); 3) 5811490530 5811490430 5811491530 5811491430

1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

129

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30x22 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without
Operating voltage DC 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar AC 50 Hz 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V Flow conductance C [l/(s*bar)] 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 Qn Working pressure min./max. [bar] -0.95 / 16 -0.95 / 16 3 / 16 3 / 16 -0.95 / 16 -0.95 / 16 3 / 16 3 / 16 -0.95 / 16 -0.95 / 16 Control pressure min./max. [bar] 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 Weight Note Part No.

[l/min] 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100

[kg] 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2) 2); 3) 1) 1); 3) 2) 2); 3) 1) 1); 3) 2) 2); 3) 5811492530 5811492430 5811493530 5811493430 5811590530 5811590430 5811591530 5811591430 5811592530 5811592430 5811593530 5811593430 5811790530 5811790430 5811791530 5811791430 5811792530 5811792430 5811793530 5811793430

Dimensions

174

30 18

74,8

38

14

70

14

40
00130278

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

130

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Standards Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve external soft sealing Single base plate principle 0 bar / 8 bar -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 12 ms 29 ms with hexagon socket 2 Nm

00132158

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 6

MO

Operating voltage DC

Flow conductance C [l/(s*bar)]

Qn

Control pressure min./max. [bar] 3.5 / 8

Weight

Part No.

[l/min] 950

[kg] 0.58 R402003722

NC/NC

24 V

3.2

MO = Manual override The valve must be supplied with compressed air via ports 3 and 5 Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

131

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Dimensions

30 205,8 18

74,8

38

14

70

14

40
00130276

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

132

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 28 ms with hexagon socket 2 Nm

00132159

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 6

MO

Operating voltage DC

Flow conductance C [l/(s*bar)] 5.2

Qn

Working pressure min./max. [bar] 3 / 10

Control pressure min./max. [bar] 3 / 10

Weight

Note

Part No.

[l/min] 1400

[kg] 0.39 1) 5811170190

24 V

24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

5.2

1400

3 / 10

3 / 10

0.39

1); 3)

5811171190

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

133

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
MO Operating voltage DC Flow conductance C [l/(s*bar)] 5.2 Qn Working pressure min./max. [bar] -0.95 / 10 Control pressure min./max. [bar] 3 / 10 Weight Note Part No.

[l/min] 1400

[kg] 0.39 2) 5811172190

24 V

24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

5.2

1400

-0.95 / 10

3 / 10

0.39

2); 3)

5811173190

Dimensions

102,9

30 18

74,8

14

38

10

70

14

40
00130277

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

134

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 13 ms 13 ms with hexagon socket 2 Nm

00132160

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 6

MO

Operating voltage DC 24 V 24 V

Flow conductance C [l/(s*bar)] 5.2 5.2

Qn

Working pressure min./max. [bar] 1.5 / 10 1.5 / 10

Control pressure min./max. [bar] 1.5 / 10 1.5 / 10

Weight

Note

Part No.

[l/min] 1400 1400

[kg] 0.58 0.58 1) 1); 3) 5811290190 5811291190

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

135

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
MO Operating voltage DC 24 V 24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar Flow conductance C [l/(s*bar)] 5.2 5.2 Qn Working pressure min./max. [bar] -0.95 / 10 -0.95 / 10 Control pressure min./max. [bar] 1.5 / 10 1.5 / 10 Weight Note Part No.

[l/min] 1400 1400

[kg] 0.58 0.58 2) 2); 3) 5811292190 5811293190

Dimensions

30 205,8 18

74,8

38

14

70

14

40
00130276

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

136

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent with differential piston
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports
00132161

ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 15 ms 28 ms with hexagon socket 2 Nm

Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque

Materials: Housing Seals

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 6

MO

Operating voltage DC 24 V

Flow conductance C [l/(s*bar)] 5.2

Qn

Working pressure min./max. [bar] 1.3 / 10

Control pressure min./max. [bar] 1.3 / 10

Weight

Note

Part No.

[l/min] 1400

[kg] 0.42 1) 5811670190

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Differential piston, signal 14 has priority The minimum pilot pressure at port 14 is dependent on the pressure in port 1. Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

137

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent with differential piston
MO Operating voltage DC 24 V 24 V 24 V Flow conductance C [l/(s*bar)] 5.2 5.2 5.2 Qn Working pressure min./max. [bar] 1.3 / 10 -0.95 / 10 -0.95 / 10 Control pressure min./max. [bar] 1.3 / 10 1.3 / 10 1.3 / 10 Weight Note Part No.

[l/min] 1400 1400 1400

[kg] 0.42 0.42 0.42 1); 3) 2) 2); 3) 5811671190 5811672190 5811673190

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Differential piston, signal 14 has priority The minimum pilot pressure at port 14 is dependent on the pressure in port 1. Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

102,9

30 18

74,8

26

38

10

27,5

70

14

40
00132619

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

138

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
Standards Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Switch-on time Switch-off time Mounting screw mounting screw tightening torque Materials: Housing Seals Aluminum Acrylonitrile Butadiene Rubber ISO 5599-1 Spool valve soft sealing Single base plate principle See table below -15C / +50C -15C / +50C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % 14 ms 28 ms with hexagon socket 2 Nm

00132162

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Operating voltage DC 24 V

Voltage tolerance DC -10% / +10%

Power consumption DC

W 6

MO

Operating voltage DC 24 V 24 V

Flow conductance C [l/(s*bar)] 4.3 4.3

Qn

Working pressure min./max. [bar] 3 / 10 3 / 10

Control pressure min./max. [bar] 3 / 10 3 / 10

Weight

Note

Part No.

[l/min] 1100 1100

[kg] 0.58 0.58 1) 1); 3) 5811490190 5811491190

MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

139

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30x30 mm CNOMO compressed air connection output: Base plate ISO 5599-1 Electr. connection: Plug, ISO 4400, form A Manual override: without detent
MO Operating voltage DC 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V 24 V MO = Manual override 1)Pilot:internal 2)Pilot:external 3)with throttle Nominal flow Qn at 6 bar and p = 1 bar Flow conductance C [l/(s*bar)] 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 Qn Working pressure min./max. [bar] -0.95 / 10 -0.95 / 10 3 / 10 3 / 10 -0.95 / 10 -0.95 / 10 3 / 10 3 / 10 -0.95 / 10 -0.95 / 10 Control pressure min./max. [bar] 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 3 / 10 Weight Note Part No.

[l/min] 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100

[kg] 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 0.58 2) 2); 3) 1) 1); 3) 2) 2); 3) 1) 1); 3) 2) 2); 3) 5811492190 5811493190 5811590190 5811591190 5811592190 5811593190 5811790190 5811791190 5811792190 5811793190

Dimensions

30 205,8 18

74,8

38

14

70

14

40
00130276

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

140

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve single solenoid suitable for ATEX

00132163

Standards ATEX Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 II 2G2D T4 IP65 T85C Spool valve external, internal soft sealing Single base plate principle -0.95 bar / 16 bar -20C / +70C -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % with hexagon socket 2 Nm

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. *) Note: ATEX variants can be manufactured by combining the basic valve without a coil with a CNOMO pilot valve, series DO30, and an ATEX coil. ATEX ID: see ATEX coils catalog sheet.

Flow conductance C [l/(s*bar)] 5.2

Qn

Control pressure min./max. [bar] 1400 3 / 16

Weight

Note

Part No.

[l/min]

[kg] 0.21 1); 2) 5811180000

5.2

1400

3 / 16

0.21

1); 2); 3)

5811181000

1) The pilot can be set by turning the seal under the valve cover by 180. 2) For internal pilot the working pressure min/max is the same as the control pressure min/max. 3)with throttle Basic valve without pilot valve Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

141

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve single solenoid suitable for ATEX

Dimensions

38

10

14

70

14

40
00132629

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

142

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve double solenoid suitable for ATEX

00132164

Standards ATEX Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 II 2G2D T4 IP65 T85C Spool valve external, internal soft sealing Single base plate principle -0.95 bar / 16 bar -20C / +70C -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % with hexagon socket 2 Nm

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. *) Note: ATEX variants can be manufactured by combining the basic valve without a coil with a CNOMO pilot valve, series DO30, and an ATEX coil. ATEX ID: see ATEX coils catalog sheet.

Flow conductance C [l/(s*bar)] 5.2 5.2

Qn

Control pressure min./max. [bar] 1400 1400 1.5 / 16 1.5 / 16

Weight

Note

Part No.

[l/min]

[kg] 0.21 0.21 1); 2) 1); 2); 3) 5811280000 5811281000

1) The pilot can be set by turning the seal under the valve cover by 180. 2) For internal pilot the working pressure min/max is the same as the control pressure min/max. 3)with throttle Basic valve without pilot valve Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

143

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve double solenoid suitable for ATEX

Dimensions

38

10

14

70

14

40
00132629

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

144

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve; with differential piston suitable for ATEX

00132165

Standards ATEX Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 II 2G2D T4 IP65 T85C Spool valve external, internal soft sealing Single base plate principle -0.95 bar / 16 bar -20C / +70C -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % with hexagon socket 2 Nm

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. * Note: ATEX version can be produced by combining the basic valve without coil with a series DO30 CNOMO pilot valve and an ATEX coil. ATEX ID: see ATEX coils catalog page.

Flow conductance C [l/(s*bar)] 5.2 5.2

Qn

Control pressure min./max. [bar] 1400 1400 1.3 / 16 1.3 / 16

Weight

Note

Part No.

[l/min]

[kg] 0.21 0.21 1); 2) 1); 2); 3) 5811680000 5811681000

1) The pilot can be set by turning the seal under the valve cover by 180. 2) For internal pilot the working pressure min/max is the same as the control pressure min/max. 3)with throttle Basic valve without pilot valve Differential piston, signal 14 has priority The minimum pilot pressure at port 14 is dependent on the pressure in port 1. Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

145

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve; with differential piston suitable for ATEX

Dimensions

26

38

10

27,5

70

14

40
00132630

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

146

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve suitable for ATEX

00132166

Standards ATEX Version Pilot Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Protection classwith electrical connector/plug Duty cycle Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 II 2G2D T4 IP65 T85C Spool valve external, internal soft sealing Single base plate principle -0.95 bar / 16 bar -20C / +70C -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 IP 65 100 % with hexagon socket 2 Nm

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. *) Note: ATEX variants can be manufactured by combining the basic valve without a coil with a CNOMO pilot valve, series DO30, and an ATEX coil. ATEX ID: see ATEX coils catalog sheet.

Flow conductance C [l/(s*bar)] 4.3 4.3 4.3 4.3 4.3

Qn

Control pressure min./max. [bar] 1100 1100 1100 1100 1100 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16

Weight

Note

Part No.

[l/min]

[kg] 0.21 0.21 0.21 0.21 0.21 1); 2) 1); 2); 3) 1); 2) 1); 2); 3) 1); 2) 5811480000 5811481000 5811580000 5811581000 5811780000

1) The pilot can be set by turning the seal under the valve cover by 180. 2) For internal pilot the working pressure min/max is the same as the control pressure min/max. 3)with throttle Basic valve without pilot valve Nominal flow Qn at 6 bar and p = 1 bar

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

147

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection Pilot valve width: 30 mm compressed air connection output: Base plate ISO 5599-1 Basic valve for CNOMO pilot valve suitable for ATEX

Flow conductance C [l/(s*bar)] 4.3

Qn

Control pressure min./max. [bar] 1100 3 / 16

Weight

Note

Part No.

[l/min]

[kg] 0.21 1); 2); 3) 5811781000

1) The pilot can be set by turning the seal under the valve cover by 180. 2) For internal pilot the working pressure min/max is the same as the control pressure min/max. 3)with throttle Basic valve without pilot valve Nominal flow Qn at 6 bar and p = 1 bar

Dimensions

38

10

14

70

14

40
00132629

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

148

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

2x3/2-way valve, Series 581, size 1

Qn=950 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks ATEX certified

00132167

Standards ATEX Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 II 2G2D T4 IP65 T85C Spool valve soft sealing Single base plate principle 0 bar / 8 bar -20C / +70C -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 with hexagon socket 2 Nm

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Flow conductance C [l/(s*bar)] NC/NC Nominal flow Qn at 6 bar and p = 1 bar 4.2

Qn

Control pressure min./max. [bar] 3.5 / 8

Weight

Part No.

[l/min] 950

[kg] 0.21 R402003708

Dimensions

35

70

40
00132626

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

149

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks Single air pilot ATEX certified

00132168

Standards ATEX Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 II 2G2D T4 IP65 T85C Spool valve soft sealing Single base plate principle -0.95 bar / 16 bar -20C / +70C -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 with hexagon socket 2 Nm

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Flow conductance C [l/(s*bar)] 5.2

Qn

Control pressure min./max. [bar] 3 / 16

Weight

Note

Part No.

[l/min] 1400

[kg] 0.21 5811130000

5.2 1)with throttle Connection 12 must be connected with atmospheres Nominal flow Qn at 6 bar and p = 1 bar

1400

3 / 16

0.21

1)

5811131000

Dimensions

35

70

40
00132626

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

150

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks double air pilot ATEX certified

00132169

Standards ATEX Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 II 2G2D T4 IP65 T85C Spool valve soft sealing Single base plate principle -0.95 bar / 16 bar -20C / +70C -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 with hexagon socket 2 Nm

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Flow conductance C [l/(s*bar)] 5.2

Qn

Control pressure min./max. [bar] 1.5 / 16

Weight

Note

Part No.

[l/min] 1400

[kg] 0.21 5811230000

5.2 1)with throttle Nominal flow Qn at 6 bar and p = 1 bar

1400

1.5 / 16

0.21

1)

5811231000

Dimensions

35

70

40
00132626

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

151

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks Manual override: with detent ATEX certified

Standards ATEX Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 II 2G2D T4 IP65 T85C Spool valve soft sealing Single base plate principle -0.95 bar / 16 bar -20C / +70C -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 with hexagon socket 2 Nm

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Flow conductance C [l/(s*bar)] 5.2 5.2 1)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Qn

Control pressure min./max. [bar] 1.5 / 16 1.5 / 16

Weight

Note

Part No.

[l/min] 1400 1400

[kg] 0.21 0.21 1) 5811330000 5811331000

Dimensions

35

70 81

40
00132628

With manual override Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

152

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/2-way valve, Series 581, size 1

Qn=1400 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks with differential piston ATEX certified

00132171

Standards ATEX Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 II 2G2D T4 IP65 T85C Spool valve soft sealing Single base plate principle -0.95 bar / 16 bar -20C / +70C -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 with hexagon socket 2 Nm

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Flow conductance C [l/(s*bar)] 5.2 5.2 1)with throttle Differential piston, signal 14 has priority Nominal flow Qn at 6 bar and p = 1 bar

Qn

Control pressure min./max. [bar] 1.3 / 16 1.3 / 16

Weight

Note

Part No.

[l/min] 1400 1400

[kg] 0.21 0.21 1) 5811630000 5811631000

Dimensions

35

26

27,5

70

40
00132627

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

153

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks ATEX certified

00132172

Standards ATEX Version Sealing principle Blocking principle Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Pneumatic ports Mounting screw mounting screw tightening torque Materials: Housing Seals

ISO 5599-1 II 2G2D T4 IP65 T85C Spool valve soft sealing Single base plate principle -0.95 bar / 16 bar -20C / +70C -20C / +70C Compressed air 50 m 0 mg/m - 5 mg/m Base plate ISO 5599-1 with hexagon socket 2 Nm

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Flow conductance C [l/(s*bar)] 4.3 4.3 4.3 4.3 4.3 4.3 1)with throttle Nominal flow Qn at 6 bar and p = 1 bar

Qn

Control pressure min./max. [bar] 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16 3 / 16

Weight

Note

Part No.

[l/min] 1100 1100 1100 1100 1100 1100

[kg] 0.21 0.21 0.21 0.21 0.21 0.21 1) 1) 1) 5811430000 5811431000 5811530000 5811531000 5811730000 5811731000

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

154

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

5/3-way valve, Series 581, size 1

Qn=1100 l/min plate connection compressed air connection output: Base plate ISO 5599-1 Can be assembled into blocks ATEX certified

Dimensions

35

70

40
00132626

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

155

Slow-start valve

Qn=3300 l/min Pilot valve width: 15 mm Manual override: without detent

Version Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air
00130324

Spool valve 3 bar / 10 bar -15C / +50C -15C / +50C Compressed air 5 m 0 mg/m - 1 mg/m IP 65 100 % 60 ms

Protection classwith electrical connector/plug Duty cycle Switch-off time

Materials: Housing Seals

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz

AC 60 Hz

DC

Voltage tolerance AC 50 Hz

AC 60 Hz

Power consumption DC W 2 -

24 V -

24 V 230 V

110 V -

-10% / +10% -

-10% / +10% -10% / +10%

-10% / +10% -

Switch-on Holding power power AC 50 AC 60 AC 50 AC 60 Hz Hz Hz Hz VA VA VA VA 10 8 10 8 10 8 -

MO DC 24 V 24 V 24 V MO = Manual override 1) with encapsulated cable 2) electrical connector form C, ISO 15217 3) pin spacing 8 mm 4) pin spacing 9.4 mm

Operating voltage AC 50 Hz 24 V 230 V AC 60 Hz 110 V -

Flow conductance C [l/(s*bar)]

Qn

Weight

Note

Part No.

[l/min]

[kg]

11.3

3300

0.39

1) 1) 4) 2); 3) 4) 4)

5835901200 5835900100 5835901100 5835902100 5835901300 5835901400

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

156

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Slow-start valve

Qn=3300 l/min Pilot valve width: 15 mm Manual override: without detent

Dimensions

D583_018

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

157

Slow-start valve

Qn=3300 l/min Pilot valve width: 22 mm Manual override: with detent

Version Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Protection classwith electrical connector/plug Duty cycle Switch-off time
00130322

Spool valve 3 bar / 10 bar -15C / +50C -15C / +50C Compressed air 5 m 0 mg/m - 1 mg/m IP 65 100 % 60 ms

Materials: Housing Seals

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz

AC 60 Hz

DC

Voltage tolerance AC 50 Hz

AC 60 Hz

Power consumption DC W 2 5 -

24 V 24 V -

24 V 230 V

110 V -

-10% / +10% -10% / +10% -

-10% / +10% -10% / +10%

-10% / +10% -

Switch-on Holding power power AC 50 AC 60 AC 50 AC 60 Hz Hz Hz Hz VA VA VA VA 10 8 10 8 10 8 -

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

158

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Slow-start valve

Qn=3300 l/min Pilot valve width: 22 mm Manual override: with detent

MO DC 24 V 24 V 24 V 24 V MO = Manual override 1) Pilot valve on side 2) Pilot valve on top 3) Low power consumption

Operating voltage AC 50 Hz 24 V 24 V 230 V 230 V AC 60 Hz 110 V 110 V -

Flow conductance C [l/(s*bar)]

Qn

Weight

Note

Part No.

[l/min]

[kg]

11.3

3300

0.39

2) 1) 2); 3) 1); 3) 2) 1) 2) 1) 2) 1) 2) 1)

5832111200 5832115200 5832151100 5832155100 5832111100 5832115100 5832111300 5832115300 5832111400 5832115400 5832111000 5832115000

11.3

3300

0.39

Dimensions

D583_004

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

159

Slow-start valve

Qn=3300 l/min Pilot valve width: 30 mm Manual override: without detent, with detent, without

Version Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air Protection classwith electrical connector/plug Duty cycle Switch-off time Materials: Housing Seals

Spool valve 3 bar / 10 bar -15C / +50C -15C / +50C Compressed air 5 m 0 mg/m - 1 mg/m IP 65 100 % 60 ms

00130323

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC

Operating voltage AC 50 Hz 24 V 24 V 230 V -

DC

Voltage tolerance

Power consumption AC 50 Hz -10% / +10% DC

-10% / +10% -10% / +10%

W 6.7 2

Switch-on power AC 50 Hz VA 10 -

Holding power AC 50 Hz VA 8 -

MO DC

Operating voltage AC 50 Hz 24 V 24 V 24 V 230 V 230 V 230 V

Flow conductance C [l/(s*bar)] 11.3

Qn

Weight

Note

Part No.

[l/min] 3300

[kg] 0.39 1) 5832171540 5832171440 5832171650 5832171450 5832171530

11.3

3300

0.39

11.3

3300

0.39

5832171430

MO = Manual override 1) Low power consumption

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

160

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Slow-start valve

Qn=3300 l/min Pilot valve width: 30 mm Manual override: without detent, with detent, without

Dimensions

D583_019

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

161

Slow-start valve
Qn=3300 l/min

Version Working pressure min./max. Ambient temperature min./max. Medium temperature min./max. Medium Max. particle size Oil content of compressed air
00130320

Spool valve 3 bar / 10 bar -15C / +50C -15C / +50C Compressed air 5 m 0 mg/m - 5 mg/m

Materials: Housing Seals

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Flow conductance C [l/(s*bar)] 11.3

Qn

Weight

Part No.

[l/min] 3300

[kg] 0.39 5832131000

Dimensions

D583_213

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

162

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

Single subbase, for soft-start valve

compressed air connection output: G 1/2

Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Number of valve positions Exhaust (3,5) Materials: Subbase
P583_007

-20C / +70C -20C / +70C Compressed air -1 bar / 16 bar 1 unrestricted exhaust Ports separated

Die-cast aluminum, black painted

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Input [1] G 1/2

Compressed air connection Output Exhaust [2 / 4] [3/ 5] G 1/2 G 1/2

Pilot connection [X] G 1/8

Weight [kg] 0.34

Part No.

5834710000

Dimensions

D583_008

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

163

ISO 5599-1, size 1, Series 581


Accessories

Electro module

Plug, M8, 3-pin 581, Modular system


Ambient temperature min./max. Protection class Operating voltage DC max. -40C / +90C IP 67 48 V

P590_006

Type

Electrical interface [Port 2]

Max. current [A] 2.1

Cable length L [m] 3 10 25 50

Part No.

10 outputs

Plug, M8, 3-pin

0493831909 0493832018 0493837818 0493837907

Dimensions

21

30 12

18,5

15

82,5

9 4

9,2

8 3 7 2

12 3 12 3

6 1

10
00133705

Pin assignment 1) +24 V 2) ground 3) 0 V

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

72,5

10 5

164

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Connecting cable, Series CN2

Plug, M8, 3-pin 581, Modular system


Protection class IP 67

P590_061

Electrical interface [Port 2] Plug, M8, 3-pin Plug, M8, 3-pin

Number of wires

Cable length L [m] 3 5

Weight [kg] 0.1 0.16

Part No.

3 3

4407280000 4404285000

Pin assignment

12 3
00133708

Pin assignment 1) +24 V 2) ground 3) 0 V

Pilot valve, 15 mm pilot valve width

Manual override: without detent 581, Modular system


Working pressure min./max. Ambient temperature min./max. Medium Protection classwith electrical connector/plug Status displayLED Duty cycle 0 bar / 10 bar -10C / +50C Compressed air See table below Green 100 %

P581_205

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

165

ISO 5599-1, size 1, Series 581


Accessories

Operating voltage DC 24 V 24 V

Power consumption DC

W 2.2 2

Operating voltage DC

Cable length

Protection class

Weight

Note

Part No.

24 V

[m] 0.2 0.35 0.5 0.7 5

IP 65 IP 67 IP 67 IP 67 IP 67 IP 67

[kg] 0.04 0.05 0.056 0.058 0.07 0.1

1); 2) -

0493833502 0493833308 0493832506 0493833103 0493841904 0493838601

1) for electrical connector 2)Low power consumption

Dimensions,with cable

15,2

46

12 3
00132661

Pin assignment 1) +24 V 2) ground 3) 0 V

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

L +10 -5

166

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Dimensions,without cable

1,9

10,8

23,7

3,8

3,8

3,5

3,8

9,7 15,2

20,7

8,6

M2,5

15,2

8,2
00132662

Pilot valve, 30 mm pilot valve width with CNOMO porting configuration


581, Modular system

Working pressure min./max. Ambient temperature min./max. Medium Protection classwith electrical connector/plug Duty cycle

See table below -10C / +50C Compressed air IP 65 100 %

P581_160

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

40,8

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

167

ISO 5599-1, size 1, Series 581


Accessories

DC

Operating voltage AC 50 Hz 24 V 24 V 12 V 48 V 110 V 220 V 230 V 24 V 48 V 110 V

DC

Voltage tolerance

Power consumption AC 50 Hz -20% / +10% -20% / +10% -20% / +10% -20% / +10% DC

-10% / +10% -10% / +10% -10% / +10% -10% / +10% -10% / +10% -10% / +10% -

W 2 6.7 2 2 2 2 -

Switch-on power AC 50 Hz VA 10 10 10 10

Holding power AC 50 Hz VA 8 8 8 8

MO

Operating voltage DC AC 50 Hz 12 V 24 V 48 V 110 V 220 V 24 V 24 V 48 V 110 V 230 V 230 V -

Working pressure min./max. [bar]

Weight

Note

Part No.

[kg]

0 / 10

0.17

1) 1) 1) 1) 1); 2) 1); 2) 1); 2) 1); 2) 1); 2) 1)

0.162 0 / 16 0.206

5428110020 5428110040 5428110070 5428110080 5420890010 5420890020 5420890030 5420890070 5420890080 5428150080 5420850020

MO = Manual override 1) pilot valve 30x22 mm with CNOMO porting configuration 2)Low power consumption

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

168

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Dimensions
35,5 29,9 21 M5
5
... . . . 022 100%ED max. ...

29,5

24V 87mA 16bar PR1

56,5

M4

3 10
2 1

22

PRESS

30

0,5 7 15,5 32

4 21

4,5

00132665

Pilot valve, 22 mm pilot valve width

Manual override: with detent 581, Modular system


Working pressure min./max. Ambient temperature min./max. Medium Protection classwith electrical connector/plug Duty cycle 0 bar / 10 bar -15C / +50C Compressed air IP 65 100 %

P581_178

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

DC 24 V 24 V

Operating voltage AC 50 Hz 230 V -

Power consumption AC 60 Hz 110 V DC

7,5

W 5 2

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

169

ISO 5599-1, size 1, Series 581


Accessories

DC

Operating voltage AC 50 Hz 230 V 24 V -

Weight AC 60 Hz 110 V -

Note

Part No.

[kg] 0.031 0.03

1)

0493818805 0493818902

1)Low power consumption

Dimensions
3, 3

R16

22

14

2,7

14 22

2,7

22

14

4,5
00132663

Coil, Series CO1

Coil width22mm Form B, industry


Connector standard electrical connections Protection classwith electrical connector/plug ISO 6952 Plug, Form B, industry IP 65

P581_172

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

170

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Operating voltage DC 220 V 110 V 24 V 24 V 48 V 12 V

AC 50 Hz 48 V 110 V 230 V 24 V -

DC -10% / +10% -10% / +10% -10% / +10% -10% / +10% -

Voltage tolerance AC 50 Hz -10% / +10% -10% / +10% -10% / +10% -10% / +10% -

Power consumption DC W 5 5 2 5 5 5

Switch-on power AC 50 Hz VA 10 10 10 10 -

Holding power AC 50 Hz VA 8 8 8 8 -

Operating voltage DC 220 V 110 V 24 V 48 V 12 V 1) Low power consumption

Weight AC 50 Hz 48 V 110 V 230 V 24 V -

Note

Part No.

[kg] 0.054 0.054 0.054 0.051 0.051 0.054 0.054 0.054 0.054

1) -

0498317804 0498317707 0498317006 0498318800 0498317502 0498317103 0498322506 0498316905 0498317618 0498317405

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

171

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

29,5

30
15 ,5
2,25 17 22 29

8 16,6

00132664

3/2-way valve

Working pressure min./max.

See table below

00121338

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

172

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

DC

Operating voltage AC 50 Hz 24 V 24 V 42 V 110 V 230 V

DC

Voltage tolerance

Power consumption AC 50 Hz -20% / +10% -20% / +10% -20% / +10% DC

-10% / +10% -10% / +10% -

W 6.7 6.7 -

Switch-on power AC 50 Hz VA 10 10

Holding power AC 50 Hz VA 8 8

Operating voltage DC 24 V 24 V AC 50 Hz 110 V 230 V 42 V 110 V 230 V

Working pressure min./max. [bar] 0 / 10 0 / 10 0 / 10 0 / 16 0 / 16 0 / 16

Ambient temperature min./max. [C]

Protection class

Weight

Fig.

Note

Part No.

-10C / +50C

IP 65

[kg] 0.202 0.202 0.202 0.15 0.15 0.15

Fig. 2 Fig. 2 Fig. 2 Fig. 1 Fig. 1 Fig. 1

1) 1) 1) -

5420770220 5420775270 5420775280 5420800390 5428200370 5428200380

1)Low power consumption nominal flow qn with secondary pressure 6 bar at p = 1 bar

Fig. 1

D535_207

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

173

ISO 5599-1, size 1, Series 581


Accessories

Fig. 2

D535_210

Control unit for manual override


for581, Modular system

P590_043

Type for double-sided electrically actuated valves, 15 pilot valve width 1) 6 controls per set

Weight [kg] 0.03

Note

Material number

1)

0493835718

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

174

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Multipole plug

Socket, C/2 581, Modular system

P590_018

number of plug options 1 PG21 input, holes for 2 cables 8, incl. mounting bracket and screws PG21 input, holes for 2 cables 8, incl. mounting bracket and screws and connected electro module (10 pilot valves) PG21 input, holes for 2 cables 8, incl. mounting bracket and screws and connected electro module (20 pilot valves) 1)Housing:Plastic

Housing color

Weight [kg] 0.231

Note

Part No.

1 position

Black

0493834118

1 position

Black

0.069

1)

0493834304

1 position

Black

0.067

1)

0493834207

Blanking plug

for581, Modular system


Ambient temperature min./max. -10C / +50C

P590_074

Type Blanking plug for outputs not used on the electro module 1) quantity delivered 10

Material

Weight [kg] 0.006

Note

Material number

Polyamide

1)

0493833405

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

175

ISO 5599-1, size 1, Series 581


Accessories

valve housing, without cover

standard:ISO 5599-1 for581, size 1, Aluminum


Ambient temperature min./max. Medium Max. particle size Oil content of compressed air -20C / +70C Compressed air 50 m 40 mg/m - 400 mg/m

P581_174

Type 5/2-way valve, monostable 5/2-way valve, double solenoid 5/2-way valve, double solenoid, with manual override 5/3-way valve, closed center 5/3-way valve, exhausted center 5/2-way solenoid valve, with differential piston 5/3-way valve, pressurized center 2x3/2-way solenoid valve

Material Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum

Weight [kg] 0.27 0.27 0.27 0.15 0.2 0.2 0.14 0.27

Note 3) 3) 3)1) 3) 3) 3)2) 3) 3)

Material number 5811100000 5811200000 5811300000 5811400000 5811500000 5811600000 5811700000 5811800000

1) The valve can be changed to a single solenoid version with air return. 2) signal 14 has priority 3) The valve housings must be supplemented with dowel pins or a throttle insert.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

176

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

valve housing, without cover

standard:ISO 5599-1 for581, size 1, Plastic


Ambient temperature min./max. Medium Max. particle size Oil content of compressed air -20C / +70C Compressed air 50 m 40 mg/m - 400 mg/m

P581_174

Type 2x3/2-way solenoid valve 5/2-way valve, monostable 5/2-way valve, double solenoid 5/2-way valve, double solenoid, with manual override 5/2-way solenoid valve, with differential piston 5/3-way valve, closed center 5/3-way valve, pressurized center 5/3-way valve, exhausted center

Material Polyamide, fiber-glass reinforced Polyamide, fiber-glass reinforced Polyamide, fiber-glass reinforced Polyamide, fiber-glass reinforced Polyamide, fiber-glass reinforced Polyamide, fiber-glass reinforced Polyamide, fiber-glass reinforced Polyamide, fiber-glass reinforced

Weight [kg] 0.1 0.09 0.08 0.08 0.14 0.09 0.09 0.09

Note 1) 2) -

Material number R402002299 R402002292 R402002293 R402002294 R402002297 R402002295 R402002298 R402002296

1) The valve can be changed to a single solenoid version with air return. 2) signal 14 has priority

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

177

ISO 5599-1, size 1, Series 581


Accessories

valve cover, with or without pilot valve

standard:ISO 5599-1 for581, size 1, for electrically operated valves, modular system
Ambient temperature min./max. Medium Max. particle size Oil content of compressed air -20C / +70C Compressed air 50 m 40 mg/m - 400 mg/m

P581_163

Type 5/2-way valve, single solenoid 2x3/2-, 5/2-, 5/3-way valve 5/2-way valve, monostable 2x3/2-, 5/2-, 5/3-way valve 5/2-way valve, monostable 2x3/2-, 5/2-, 5/3-way valve all

Pilot valve width [mm] 15 mm 15 mm 22 mm 22 mm 22 mm 22 mm 30 mm

Weight [kg] 0.057 0.054 0.13 0.15 0.13 0.15 0.2

Note 1) 1) 2)4) 2)4) 2)3) 2)3) 1)

Material number 0493842501 0493842609 5811010000 5811020000 5811050000 5811060000 5811080000

1) without pilot valve 2) with pilot valve without coil 3) For version 24 V DC, 2 W 4) For version 12 V DC - 230 V AC, 5 W

throttle insert for flow control, Port 3/5


for581, size 1, Modular system

P581_100

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

178

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Weight [kg] 0.014 1) delivered in pairs incl. plug set

Note 1)

Material number 5811001000

Dimensions

00133204

plug set for flow control screws


for581, size 1, Modular system

P581_116

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

179

ISO 5599-1, size 1, Series 581


Accessories

Material Polyamide

Weight [kg] 0.015

Note 1)

Material number 5811000000

1) Delivered in pairs for modification of a valve from with throttle set to without throttle set

Safety plugs for throttle insert


for581, size 1 - 4, Modular system

P581_046

Type ISO 1 - 4

Delivery quantity [Piece] 10

Weight [kg] 0.005

Material number 4634210000

Maintenance plate to exchange valve


standard:ISO 5599-1 for581, size 1

Ambient temperature min./max. Medium Max. particle size Oil content of compressed air

-10C / +50C Compressed air 50 m 40 mg/m - 400 mg/m

P581_179

Working pressure min./max. -0.95 / 10

Material

Surface

Weight [kg] 0.2

Material number

Aluminum

black anodized

5801590000

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

180

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

D581_180

Part No. 5801590000

A1 70

A2 85

B 40

C 25

Valve cover seal, Valve housing seal


for581, size 1

P581_173

Type Valve cover seal, electrically operated valves Valve cover seal, pneumatically operated valves Valve housing seal, between housing and base plate

Material Nitrile rubber Nitrile rubber Nitrile rubber

Weight [kg] 0.005 0.005 0.001

Material number 0490429808 0490429905 0486715103

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

181

ISO 5599-1, size 1, Series 581


Accessories

Mecproof, cabinet mounting

standard:ISO 5599-1 for581, size 1, Modular system


Ambient temperature min./max. Medium Max. particle size Oil content of compressed air -10C / +50C Compressed air 50 m 40 mg/m - 400 mg/m

P581_255

Port

Type

Intermediate plate for slow-start valve series 583 Intermediate plate sealing Sealing strip incl. assembly instructions G 3/8 End plate G 1/2 1) 5 connection thread on bottom 2) 2connection thread on bottom 3) for max. 10 intermediate plates

Delivery quantity [Piece] 10 -

Weight [kg] 0.63 0.03 0.02 0.34

Note

Material number

3) -

5802960000 5802970000 5802980000 5802950000

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

182

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

T581_287

1) intermediate plate 2) intermediate plate gasket 3) sealing strip 4) end plate

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

183

ISO 5599-1, size 1, Series 581


Accessories

Single subbase, thread connections on the side

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4 Reversed pressure supply permissible
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Number of valve positions Direction of pneumatic port (1) Direction of pneumatic port (3,5) Direction of pneumatic port (2,4) Exhaust (3,5) Materials: Subbase Die-cast aluminum -25C / +70C -25C / +70C Compressed air -0.95 bar / 70 bar 1 On the side On the side On the side With directional exhaust (3/5) Ports separated

00107419

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size Input [1] G 1/4

Compressed air connection Output [2 / 4] G 1/4 Exhaust [3/ 5] G 1/4 Pilot control exhaust [R] G 1/8 Pilot connection [X] G 1/8

Grid dimension

Part No.

ISO 1 Part No.

48

1825503143 Weight [kg] 0.17

1825503143

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

184

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

D581_140

Part No. 1825503143 Part No. 1825503143 *) Ports

B1 48 L4 98

H1 32 L5 24

H2 10 L6 58

H3 11,5

H4 21.5

H5 23.5

D1 5.5

D2 *) G 1/4

D3 *) G 1/8

L1 84

L2 43

L3 110

Single subbase, thread connections on the bottom

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4 Reversed pressure supply permissible
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Number of valve positions Direction of pneumatic port (1) Direction of pneumatic port (3,5) Direction of pneumatic port (2,4) Exhaust (3,5) Materials: Subbase Die-cast aluminum -25C / +70C -25C / +70C Compressed air -0.95 bar / -1 Down Down Down With directional exhaust (3/5) Ports separated

5746-121

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

185

ISO 5599-1, size 1, Series 581


Accessories

Size

Input [1] G 1/4

ISO 1

Compressed air connection Output Exhaust Pilot control exhaust [2 / 4] [3/ 5] [R] G 1/4 G 1/4 G 1/8

Pilot connection [X] G 1/8

Weight

Part No.

[kg] 0.196

1825503201

Dimensions

D898_111

Part No. 1825503201 Part No. 1825503201 *) Ports

B1 46 L4 49

B2 7 L5 7

B3 11.5 L6 23

D1 5.5 L7 11,5

D2 *) G 1/4 L8 31

D3 *) G 1/8

H1 30

H2 10

H3 5

L1 110

L2 55

L3 49

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

186

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Single subbase, ports on side

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/8 - 8
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Number of valve positions Surface Direction of pneumatic port (1) Direction of pneumatic port (3,5) Direction of pneumatic port (2,4) Direction of pneumatic port (X) Exhaust (3,5) Materials: Subbase Die-cast aluminum, black painted -20C / +70C -20C / +70C Compressed air -1 bar / 16 bar 1 painted On the side On the side On the side On the side With directional exhaust (3/5) Ports separated

5810-491

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

ISO 1

Input [1] G 1/8 G 1/4 6 8

Compressed air connection Output Exhaust [2 / 4] [3/ 5] G 1/8 G 1/8 G 1/4 G 1/4 6 6 8 8

Pilot connection [X] G 1/8 G 1/8 4 6

Weight [kg] 0.11 0.17 0.13 0.22

Part No.

5801710000 5801740000 5801810000 5801770000

Dimensions

D581_029

Part No. 5801710000 5801740000 5801810000 5801770000

ISO 1 ISO 1 ISO 1 ISO 1

A *) G 1/8 G 1/4 6 8

B *) G 1/8 G 1/8 4 6

C 70 70 70 70

D 40 40 40 40

E 20 23 20 23

F 8 11 8 10

G 26.5 31.5 26.5 31.5

H 9 11.5 9 11.5

K 18 23 18 23

L 2 2 2 2

M 84 96 84 96

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

187

ISO 5599-1, size 1, Series 581


Accessories

Part No. 5801710000 5801740000 5801810000 5801770000 *) Ports

N 96 110 96 110

R 5.4 5.4 5.4 5.4

S 40 46 40 46

T 64 64

U 21 21

V 10 12 10 12

Single subbase, ports on bottom

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/8 - 6
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Number of valve positions Surface Direction of pneumatic port (1) Direction of pneumatic port (3,5) Direction of pneumatic port (2,4) Direction of pneumatic port (X) Exhaust (3,5) Materials: Subbase Die-cast aluminum, black painted -20C / +70C -20C / +70C Compressed air -1 bar / 16 bar 1 painted Down Down Down Down unrestricted exhaust Ports separated

5810-481

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

ISO 1

Input [1] G 1/8 6

Compressed air connection Output Exhaust [2 / 4] [3/ 5] G 1/8 G 1/8 6 6

Pilot connection [X] G 1/8 4

Weight [kg] 0.11 0.13

Part No.

5801700000 5801800000

Dimensions

D581_027

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

188

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Part No. 5801700000 5801800000 Part No. 5801700000 5801800000 *) Ports

ISO 1 ISO 1 N 96 96

A *) G1/8 6 P 8 8

B *) G1/8 4 R 5.4 5.4

C 70 70 S 40 40

D 40 40

E 20 20

F 8 8

G 26.5 26.5

H 9 9

K 18 18

L 2 2

M 84 84

Subbase, for direct mounting of ISO valves on cylinders

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/8
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Surface
P523_014

-20C / +70C -20C / +70C Compressed air -1 bar / 16 bar black anodized

Materials: Subbase Seals

Aluminum, black anodized Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

Input [1] G 1/8

Compressed air connection Output Exhaust [2 / 4] G 1/8 [3/ 5] G 1/8

ISO 1

Pilot connection [X] G 1/8

Weight

Note

Part No.

[kg] 0.175

1)

5801690000

1) 32 - 125 mm 2) 63 - 125 mm Scope of delivery incl. mounting screws

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

189

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

D581_037

Part No. 5801690000 Part No. 5801690000

ISO 1 H 15

1, 4, 3, (5) 2* G 1/8 G 1/8, G 1/4 J 17 K 40 L 32

12, 14 G 1/8

A 93.5

B 80

C 62

D 35

E 8

F 9

G 20

* Two different threaded banjo bolts are supplied with 5801690000 to be used with different cylinders.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

190

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Intermediate plate, ports 2 and 4 on bottom

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4 Can be assembled into blocks Single base plate principle Reversed pressure supply permissible With collective pilot air exhaust
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Number of valve positions Grid dimension Direction of pneumatic port (1) Direction of pneumatic port (3,5) Direction of pneumatic port (2,4) Direction of pneumatic port (R) Direction of pneumatic port (X) Exhaust (3,5) Compressed air connection Materials: Subbase Seals Die-cast aluminum Acrylonitrile Butadiene Rubber -25C / +70C -25C / +70C Compressed air -0.95 bar / 10 bar 1 82 mm On the side On the side Down On the side On the side With directional exhaust (3/5) Ports separated according to ISO 5599-1

00107662

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

Compressed air connection Output [2 / 4] G 1/4 Pilot connection [X] G 1/8

Weight

Part No.

ISO 1 Scope of delivery incl. seal and mounting screws

[kg] 0.246

1825503144

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

191

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

00107666_a

Part No. 1825503144 Part No. 1825503144 Part No. 1825503144

A 110 G2 13,5 T 1,5

B 95 G3 11,25 U 3

C 5,5 H1 26,5 V 43

D 14 H2 18 W G 1/4

E1 16,5 J G 1/8

E2 16,5 K 44

E3 11,25 L 22

F1 3 M 85

F2 4,5 O M5

F3 9 P 7,5

F4 M5 R 13

G1 3 S 71

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

192

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

End plate left, End plate right

standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks Base plate principle, multiple Reversed pressure supply permissible
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Direction of pneumatic port (1) Direction of pneumatic port (3,5) Exhaust (3,5) Compressed air connection Materials: Subbase Seals Die-cast aluminum Acrylonitrile Butadiene Rubber -25C / +70C -25C / +70C Compressed air 0 bar / 16 bar On the side On the side With directional exhaust (3/5) Ports separated according to ISO 5599-1

00107661

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

ISO 1

Compressed air connection Input [1] G 3/8

Exhaust [3/ 5] G 3/8

Weight [kg] 0.208

Part No.

1825503145

Scope of delivery incl. seal and mounting screws

Dimensions

00107701_a

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

193

ISO 5599-1, size 1, Series 581


Accessories

Part No. 1825503145 Part No. 1825503145

A 7 H2 22

B G 3/8 H3 46

C 8 J 28

C1 6 K 28

D 24 L 85

D1 28 M 6

E1 11 N 2

E2 22 O 8

F2 5,5 P 24

G1 110 R 22,1

G2 95

H1 22

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

194

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Intermediate plate, Ports 2 and 4 side or bottom

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4 Can be assembled into blocks
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Number of valve positions Surface Direction of pneumatic port (2,4) Direction of pneumatic port (X) Exhaust (3,5) Materials: Subbase Seals Die-cast aluminum, black painted Acrylonitrile Butadiene Rubber -20C / +70C -20C / +70C Compressed air -1 bar / 16 bar 1 painted Both directions possible Down unrestricted exhaust Ports separated

5811_092_a

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

ISO 1

Compressed air connection Input Output [1] [2 / 4] G 1/4 G 1/4

Pilot connection [X] G 1/8

Weight [kg] 0.23

Part No.

5801500000

Scope of delivery incl. seal and mounting screws

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

195

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

D581_110

Part No. 5801500000 Part No. 5801500000

ISO 1

A 2 x G 1/4 M 12

B 3 x G 3/8 N 36

B1 3 x G 1/4 O 22

C 5.5 P 45.7

D 11 R 17

E 5.5 S 106

F 9 T 8

G 22

H 92

J 24

K 12

L n x 43 + 44

n = number of subbases

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

196

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

End plate left, End plate right

standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks Base plate principle, multiple Reversed pressure supply permissible With collective pilot air exhaust
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Direction of pneumatic port (1) Direction of pneumatic port (3,5) Exhaust (3,5) Compressed air connection Materials: Subbase Seals Die-cast aluminum, black painted Acrylonitrile Butadiene Rubber -20C / +70C -20C / +70C Compressed air -1 bar / 16 bar Both directions possible Both directions possible unrestricted exhaust Ports separated according to ISO 5599-1

5811_092_b

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

ISO 1

Compressed air connection Input [1] G 3/8

Exhaust [3/ 5] G 3/8

Weight [kg] 0.26

Part No.

5801510000

Delivered in pairs Scope of delivery incl. seal and mounting screws A suitable hole must be made for the side/bottom port.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

197

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

D581_110

Part No. 5801510000 Part No. 5801510000

ISO 1

A 2 x G 1/4 M 12

B 3 x G 3/8 N 36

B1* 3 x G 1/4 O 22 P 45.7

C 5.5 R 17

D 11

E 5.5 S 106 T 8

F 9

G 22

H 92

J 24

K 12

L n x 43 + 44

U* 3 x G 3/8

n = number of subbases The B1* and U* connections are implemented as core hole diameters for the indicated threaded connections and must be produced if necessary.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

198

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Intermediate plate, Ports 2 and 4 on side, 1,2 and 4 also on bottom

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4 Can be assembled into blocks
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Grid dimension Mounting screw
00107432

-15C / +70C -15C / +80C Compressed air 0 bar / 16 bar 43 mm with hexagon socket Ports separated

Materials: Housing Subbase Seals

Die-cast aluminum Die-cast aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

Input [1] G 1/4 G 1/4

Compressed air connection Output Pilot control exhaust [2 / 4] [R] G 1/4 M5

Pilot connection [X] M5

Weight

Fig.

Note

Part No.

ISO 1

[kg] 0.24 0.24 0.27 0.27

Fig. 1 Fig. 2 Fig. 3 Fig. 4

1) 2) 3) 4)

1825503286 1825503288 1825503290 1825503292

1) Ports 2 and 4 on side, pilot connection 12 and 14: single connection 2) Ports 2 and 4 on side, pilot connection 12 and 14: central manifold 3) Ports 2 and 4 on side, 1,2 and 4 also on bottom, pilot connection 12 and 14: single connection 4) Ports 2 and 4 on side, 1,2 and 4 also on bottom, pilot connection 12 and 14: central manifold Scope of delivery incl. seal and mounting screws

Fig. 1,ports 2 and 4 on side,Pilot connection 12+14: single connection

00107438

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

199

ISO 5599-1, size 1, Series 581


Accessories

00107444_a

Fig. 2,ports 2 and 4 on side,Pilot connection 12+14: central manifold

00107441

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

200

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

00107444_b

Fig. 3,Ports 2 and 4 on side, 1,2 and 4 also on bottom,Pilot connection 12+14: single connection

00107440

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

201

ISO 5599-1, size 1, Series 581


Accessories

00107445

Fig. 4,Ports 2 and 4 on side, 1,2 and 4 also on bottom,Pilot connection 12+14: central manifold

00107441

End plate left, End plate right

standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Mounting screw Exhaust (3,5)
00107431

-15C / +70C -15C / +70C Compressed air 0 bar / 16 bar with hexagon socket With directional exhaust (3/5) Ports separated

Materials: Subbase Seals

Die-cast aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

202

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Size

Input [1]

Compressed air connection Exhaust Pilot control exhaust [3/ 5] [R] G 3/8 G 1/8

Pilot connection [X] G 1/8

Weight

Fig.

Part No.

ISO 1

G 3/8

[kg] 0.404 0.382

Fig. 1 Fig. 2

1825503294 1825503297

Scope of delivery incl. seal and mounting screws

Dimensions

00107435

A = left and right end plates in two versions

n X

2 150

3 193

4 236

n = number of valve positions

Fig. 1,Thread connections 1, 3, and 5 axial

00107436

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

203

ISO 5599-1, size 1, Series 581


Accessories

00107442

Fig. 2,Thread connections 1, 3, and 5 axial and from the top

00107437

00107443

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

204

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Intermediate plate, ports 2 and 4 on bottom

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/8 - 6 Can be assembled into blocks
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Number of valve positions Surface Direction of pneumatic port (2,4) Exhaust (3,5) Materials: Subbase Seals Die-cast aluminum, black painted Acrylonitrile Butadiene Rubber -20C / +70C -20C / +70C Compressed air -1 bar / 16 bar 1 painted Down unrestricted exhaust Ports separated

5810_302_b

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

Compressed air connection Output [2 / 4] G 1/8 G 1/4 8 6 Pilot connection [X] G 1/8 G 1/8 6 4

Port

Weight

Part No.

ISO 1

G 1/4 -

[kg] 0.14 0.27 0.3 0.16

5801720000 5801750000 5801780000 5801820000

Scope of delivery incl. seal and mounting screws

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

205

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

D581_231_a

* n = Number of subbases. ** Alternative port openings, closed with plugs

Part No. 5801720000 5801750000 5801780000 5801820000 Part No. 5801720000 5801750000 5801780000 5801820000

* a b b a L 25 30 30 25

ISO 1 ISO 1 ISO 1 ISO 1 M 27 34 34 27

A G 1/8 G 1/4 8 6 N 43 43 43 43

B G 1/4 G 3/8 G 3/8 G 1/4 P 41 49 49 41

C G 1/4 G 3/8 G 3/8 G 1/4 Q 14 15 15 14

D G 1/8 G 1/8 6 4 R 27.5 34 34 27.5

E 22 27 27 22 V 72 94 94 72

F 28.5 40 40 28.5 X 5.4 6.4 6.4 5.4

G 9.5 12.5 12.5 9.5 Z 7 8 8 7

H 29.5 26.5 26.5 29.5 AA 8 10 10 13.5

J 14.5 20 20 14.5

K 100 122 122 100

* Intermediate plates designated with the same letters (ad) can be mounted together without a transition plate.

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

206

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Intermediate plate for separate air supply, ports 2 and 4 on bottom

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/8 - G 1/4 Can be assembled into blocks
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Number of valve positions Surface Direction of pneumatic port (1) Direction of pneumatic port (3,5) Direction of pneumatic port (2,4) Direction of pneumatic port (X) Exhaust (3,5) Materials: Subbase Seals Die-cast aluminum, black painted Acrylonitrile Butadiene Rubber -20C / +70C -20C / +70C Compressed air -1 bar / 16 bar 1 painted Down Down Down Down unrestricted exhaust Ports separated

5810_302_b

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Type

Size

Intermediate plate for separate air supply

ISO 1

Compressed air connection Input Output Pilot connection [1] [2 / 4] [X] G 1/8 G 1/8 G 1/8 G 1/4 G 1/4

Port

Weight

Part No.

G 1/4

[kg] 0.14 0.27

5801670000 5801680000

Scope of delivery incl. seal and mounting screws

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

207

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

D581_231_a

* n = number of subbases. ** Alternative port openings, closed with plugs. *** Only on subbases with separate intake. **** Subbase 5801680000 can also be connected to port 3 and 5.

Part No. 5801670000 5801680000 Part No. 5801670000 5801680000

ISO 1 ISO 1 M 27 34

A G 1/8 G 1/4 N 43 43

B G 1/4 G 3/8 P 41 49

C G 1/4 G 3/8 Q 14 15

D G 1/8 G 1/8 R 27.5 34

E 22 27 V 72 94

F 28.5 40 X 5.4 6.4

G 9.5 12.5 Z 7 8

H 29.5 26.5 AA 8 10

J 14.5 20

K 100 122

L 25 30

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

208

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

End plate left, End plate right

standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Surface Exhaust (3,5) Materials: Subbase Seals Die-cast aluminum, black painted Acrylonitrile Butadiene Rubber -20C / +70C -20C / +70C Compressed air -1 bar / 16 bar painted unrestricted exhaust Ports separated

5810_302_e

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

ISO 1

Compressed air connection Input Exhaust [1] [3/ 5] G 1/4 G 1/4 -

Weight [kg] 0.15 0.08

Fig.

Part No.

Fig. 1 Fig. 2

5801850000 5801860000

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

209

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

D581_231_d

* n = Number of subbases. ** Alternative port openings, closed with plugs

Part No. 5801850000 5801860000 Part No. 5801850000 5801860000 X 5.4 5.4

ISO 1 ISO 1

B G 1/4 Z 7 -

C G 1/4 -

E 22 -

J 14.5 -

K 100 100

L 25 25

M 27 -

P 41 41

Q 14

R 27.5 27.5

V 72 72

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

210

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Blanking plate

standard: ISO 5599-1 Frame size: ISO 1


Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Mounting screw Materials: Seals
00104044

+0C / +80C +0C / +80C Compressed air -0.9 bar / 16 bar with hexagon socket

Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Type Blanking plate Gasket ISO 1 Scope of delivery incl. seal and mounting screws

Size ISO 1 -

Weight [kg] 0.072 -

Part No. 1825503282 1821015028

Dimensions

00108448

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

211

ISO 5599-1, size 1, Series 581


Accessories

Blanking plate

standard: ISO 5599-1 Frame size: ISO 1


Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Number of valve positions Surface Materials: Housing Subbase Seals Die-cast aluminum, black painted Die-cast aluminum Acrylonitrile Butadiene Rubber -20C / +70C -20C / +70C Compressed air -1 bar / 16 bar 1 painted

5810-321

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size ISO 1 Scope of delivery incl. seal and mounting screws

Weight [kg] 0.055

Part No. 5801870000

Dimensions

00128858

Part No. 5801870000

A 69

B 39

C 7

D 2

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

212

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Throttle plate

standard: ISO 5599-1 Frame size: ISO 1


Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Materials: Subbase Seals
00107463

+0C / +80C +0C / +80C Compressed air 0 bar / 16 bar

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size ISO 1 Scope of delivery incl. seal and mounting screws

Weight [kg] 0.255

Part No. 0821201023

Dimensions

00107465_a

Part No. 0821201023 Part No. 0821201023 Part No. 0821201023

A 16.3 L 16.3 X 25

B 11,1 M 28 Y 40

C 105.6 N 5.5 Z M5

D 95.6 O 5.2 Z1 M59

E 80 P 36

F 3 R 18

G 26,5 S 18

G1 8.5 SW1 8

H 26.5 SW2 3

J 4.5 T 27

K 9 U 9

K1 10.8 W 9

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

213

ISO 5599-1, size 1, Series 581


Accessories

Pressure regulator for vertical stacking

standard: ISO 5599-1 Frame size: ISO 1 Controlled connection: 1, 2, 4, 2, 4


Working pressure min./max. Ambient temperature min./max. Medium Max. particle size Oil content of compressed air
00123548

-- / 16 bar +5C / +50C Compressed air 5 m 0 mg/m - 5 mg/m

Materials: Housing Seals

Zinc butadiene rubber

Frame size

Adjustment range min./max. [bar] 0.5 / 12

Controlled connection

Weight [kg] 1.15 1.19 1.15

Note

Part No.

1) 2) 1) 2) 1) 2) 1) 2)

0821302048 0821302060 0821302054 0821302062 0821302057 0821302063 0821302051 0821302061

ISO 1

ISO 1

0.5 / 12

1.19 1.15

ISO 1

0.5 / 12

1.19 1.57

ISO 1

0.5 / 12

2, 4

1.61

1) with pressure gauge 2) with pressure gauge and adapter Scope of delivery incl. seal and mounting screws pressure regulator without gauge adapter, cannot be combined with IS12 ISO valves

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

214

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Flow rate characteristic

00107461

00107673

controlled connection 1 Controlled connection 2 Controlled connection 4

Controlled connection 2/4

Dimensions

00107462

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

215

ISO 5599-1, size 1, Series 581


Accessories

Transition plate

standard: ISO 5599-1 Frame size: ISO 1 - ISO 2 Can be assembled into blocks Reversed pressure supply permissible
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Mounting screw Exhaust (3,5) Materials: Housing Subbase Seals Aluminum Aluminum Acrylonitrile Butadiene Rubber -15C / +70C -15C / +80C Compressed air -0.95 bar / 16 bar hexagon head unrestricted exhaust Ports separated

00107448

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size ISO 1 - ISO 2

Weight [kg] 0.295

Fig. Fig. 1

Part No. 1825503164

Fig. 1

00107450

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

216

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Fig. 2

00107451

Fig. 3

00107452

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

217

ISO 5599-1, size 1, Series 581


Accessories

End plates for adapter plate

standard: ISO 5599-1 Frame size: ISO 1 - ISO 2 Can be assembled into blocks Reversed pressure supply permissible
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Mounting screw Direction of pneumatic port (1) Direction of pneumatic port (3,5) Exhaust (3,5) Materials: Subbase Seals Die-cast aluminum Acrylonitrile Butadiene Rubber -15C / +70C -15C / +80C Compressed air -0.95 bar / 16 bar hexagon head On the side On the side With directional exhaust (3/5) Ports separated

00107661

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

ISO 1 - ISO 2

Compressed air connection Input Exhaust [1] [3/ 5] G 3/8 G 3/8

Weight [kg] 0.255

Note

Part No.

1)

1825503244

1) Scope of delivery: end plate size 1 + end plate size 2 2) Scope of delivery: end plate size 1 + end plate size 3 3) Scope of delivery: end plate size2 + end plate size 3 Scope of delivery incl. seal and mounting screws

00107457_a

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

218

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Supply plate

standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks Plate principle
Medium Working pressure min./max. Grid dimension Mounting screw Direction of pneumatic port (1) Exhaust (3,5)
00107433

Compressed air 1 bar / 10 bar 30 mm with hexagon socket Up With directional exhaust (3/5)

Materials: Housing Subbase Seals

Aluminum Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

ISO 1

Compressed air connection Input [1] G 3/8

Exhaust [3/ 5] G 3/8

Weight [kg] 0.22

Part No.

1825503314

Scope of delivery incl. seal and mounting screws

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

219

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

00107446

Seal for supply plate

standard:ISO 5599-1 Frame size:ISO 1

00109949

Part No. 1821015047 1821015043

Type Molded seal, separate channel 1, connect channels 5 and 3 Molded seal, separate channels 1, 3 and 5

Ambient temperature min./max. -20 / 70 -20 / 70

Material Seal Acrylonitrile Butadiene Rubber Acrylonitrile Butadiene Rubber

Weight [kg] 0.004 0.01

Delivery quantity [Piece] 1 1

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

220

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Angle subplate

standard: ISO 5599-1 Frame size: ISO 1 compressed air connection output: G 1/4
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Mounting screw Direction of pneumatic port (2,4)
P581_185

-15C / +80C -15C / +80C Compressed air 0 bar / 10 bar with hexagon socket On the side

Materials: Subbase Seals

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size Compressed air connection Output [2 / 4] ISO 1 1) With thread connection for differential pressure sensor G 1/4

Weight

Note

Part No.

[kg] 0.413 0.401

1)

1825503170 1825503324

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

221

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

00108449

Part No. 1825503170 1825503324 Part No. 1825503170 1825503324

A 37 37 N 1,5 1,5

B 25 25 O 3 3

C 12 12 P 7,5 7,5

D 22 22 R 42 42

E G 1/4 G 1/4 S 81 81

F 5,7 5,7

G 10 10

H 5,5 5,5

J 110 110

K 95 95

L 71 71

M 13 13

Blanking piece

standard:ISO 5599-1 Frame size:ISO 1 - ISO 3

D1

00106827

6,8

D2
00130480

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

222

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Part No. 1820220021 Part No. 1820220021 Material Seal Acrylonitrile Butadiene Rubber

Type ISO 1 Weight [kg] 0.008

D 16.6

D1 11.8

D2 15.8

Ambient temperature min./max. -15 / 80

Material Aluminum

Accessories, for intermediate plates


standard:ISO 5599-1 Frame size:ISO 1

00136404

Part No. 1820210041 1827009767

Type O-ring, 17 mm, 12x2,62 Mounting screw

Delivery quantity [Piece] 20 10

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

223

ISO 5599-1, size 1, Series 581


Accessories

Transition plate

standard: ISO 5599-1 Frame size: ISO 1 - ISO 2 Can be assembled into blocks Reversed pressure supply permissible
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Surface Exhaust (3,5)
5746-141

-20C / +70C -20C / +70C Compressed air -1 bar / 16 bar painted unrestricted exhaust Ports separated

Materials: Subbase Seals

Die-cast aluminum, black painted Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. The transition plate is used for combining subbases of different sizes in the same manifold.

Size ISO 1 - ISO 2 Scope of delivery incl. seal and mounting screws

Weight [kg] 0.27

Part No. 5802520000

Dimensions

D898_146_a

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

224

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Supply plate

standard: ISO 5599-1 Frame size: ISO 1 Reversed pressure supply permissible
Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Mounting screw Direction of pneumatic port (1) Direction of pneumatic port (3,5)
5746-171

-25C / +70C -25C / +70C Compressed air -0.95 bar / 16 bar hexagon head Down Down Ports separated

Materials: Subbase Seals

Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

ISO 1

Compressed air connection Input [1] G 3/8

Exhaust [3/ 5] G 3/8

Weight [kg] 0.395

Part No.

8985041162

Scope of delivery incl. seal and mounting screws

Dimensions

D581_190

Blanking piece

standard:ISO 5599-1 Frame size:ISO 1 - ISO 2

P581_191

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

225

ISO 5599-1, size 1, Series 581


Accessories

Part No. 5801530000 Part No. 5801530000 1) Only for channel1 Weight [kg] 0.011 Note 1)

Type ISO 1

Ambient temperature min./max. -20 / 70

Material Brass

Material Seal Acrylonitrile Butadiene Rubber

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

226

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Supply plate

standard: ISO 5599-1 Frame size: ISO 1 Can be assembled into blocks Plate principle
Medium Working pressure min./max. Grid dimension Mounting screw Direction of pneumatic port (1) Exhaust (3,5)
00107433

Compressed air 1 bar / 10 bar 30 mm with hexagon socket Up With directional exhaust (3/5)

Materials: Housing Subbase Seals

Aluminum Aluminum Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information.

Size

ISO 1

Compressed air connection Input [1] G 3/8

Exhaust [3/ 5] G 3/8

Weight [kg] 0.22

Part No.

1825503314

Scope of delivery incl. seal and mounting screws

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

227

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

00107446

Seal for supply plate

standard:ISO 5599-1 Frame size:ISO 1

00109949

Part No. 1821015047 1821015043

Type Molded seal, separate channel 1, connect channels 5 and 3 Molded seal, separate channels 1, 3 and 5

Ambient temperature min./max. -20 / 70 -20 / 70

Material Seal Acrylonitrile Butadiene Rubber Acrylonitrile Butadiene Rubber

Weight [kg] 0.004 0.01

Delivery quantity [Piece] 1 1

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

228

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Transition plate

standard: ISO 5599-1 Frame size: ISO 1 - ISO 2 forISO 1, ISO 2


Ambient temperature min./max. Medium temperature min./max. Medium Working pressure min./max. Surface Exhaust (3,5)
5810-341

-20C / +70C -20C / +70C Compressed air -1 bar / 16 bar painted unrestricted exhaust Ports separated

Materials: Subbase Seals

Die-cast aluminum, black painted Acrylonitrile Butadiene Rubber

Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. The transition plate is used for combining subbases of different sizes in the same manifold.

Size ISO 1 - ISO 2 Scope of delivery incl. mounting screws

Weight [kg] 0.17

Part No. 5802610000

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG | Pneumatics Valve terminal systems Valve terminal systems according to standard

229

ISO 5599-1, size 1, Series 581


Accessories

Dimensions

00128887

Part No. 5802610000

A 86

B 122

C 30

D 100

E 25

F 27

G 19

H 108

J 15

K 12.5

L M6

M M5

Sealing kit

standard:ISO 5599-1

P581_033

Part No. 5801880000 Part No. 5801880000

Port G 1/8 Material Seal Acrylonitrile Butadiene Rubber Weight [kg] 0.012

Type ISO 1

Ambient temperature min./max. -20 / 70

Material Brass

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

230

Bosch Rexroth AG | Pneumatics

Valve terminal systems Valve terminal systems according to standard

ISO 5599-1, size 1, Series 581


Accessories

Blanking piece, Subbases ISO 5599-1

standard:ISO 5599-1 Frame size:ISO 1 - ISO 3 forThread connection on bottom

P581_191

D581_192

Part No. 8985049012 Part No. 8985049012 Material Brass

Type ISO 1 Material Seal Acrylonitrile Butadiene Rubber

A 6.2

D 12.2

D1 14.8

D2 16.5

Ambient temperature min./max. -25 / 70

according to VDMA 24 345, form C/D

Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2011-07-28, Bosch Rexroth AG, subject to change

Bosch Rexroth AG Pneumatics Ulmer Strae 4 D - 30880 Laatzen Phone +49 511 2136 - 0 Fax +49 511 2136 - 2 69 sales-pneumatics@boschrexroth.de www.boschrexroth.com/pneumatics

Your contact:

Canada Bosch Rexroth Canada Corp. 3426 Mainway Drive Burlington, Ontario L7M 1A8 Tel. +1 905 335-5511 Fax +1 905 335-4184 Australia Bosch Rexroth Pty. Ltd. 3 Valediction Road Kings Park NSW 2148 Sydney Tel. +61 2 9831-7788 Fax +61 2 9831-5553

U.S.A. Bosch Rexroth Corp. 1953 Mercer Road Lexington, KY 40511-1021 Kentucky Tel. +1 859 254-8031 Fax +1 859 254-4188 Great Britain Bosch Rexroth Ltd. Broadway Lane South Cerney Cirencester, GL7 5UH Gloucestershire Tel. +44 1285 86-3000 Fax +44 1285 86-3003 further contacts: www.boschrexroth.com/addresses

The data specied above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verication. It must be remembered that our products are subject to a natural process of wear and aging. This document, as well as the data, specications and other informations set forth in it, are the exclusive property of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties. Subject to modications. Online-PDF 28-07-2011

You might also like