Professional Documents
Culture Documents
DSLAM
V1.0
2005-05-10 2005-05-15
Records
Date 2005-05-10 Version V1.0 Description Draft Author Zhao Feng, Wang Gaofeng
Table of Contents
Chapter 1 MA5300 Triple Play Service Configuration................................................................2 1.1 Triple Play Service Single PVC Solution........................................................................2 1.1.1 Networking.............................................................................................................. 2 1.1.2 Data Configuration.................................................................................................. 3 1.2 Triple Play Service Multi-PVC Solution..........................................................................7 1.2.1 Networking.............................................................................................................. 7 1.2.2 Data Configuration.................................................................................................. 8 Chapter 2 MA5600 Triple Play Service Configuration..............................................................12 2.1 Triple Play Service Single PVC Solution......................................................................12 2.1.1 Networking............................................................................................................ 12 2.1.2 Data Configuration................................................................................................13 2.2 Triple Play Service Multi-PVC Solution........................................................................16 2.2.1 Networking............................................................................................................ 16 2.2.2 Data Configuration................................................................................................17 Chapter 3 MA5100 Triple Play Service Configuration..............................................................20 3.1 Triple Play Service Multi-PVC Solution........................................................................20 3.1.1 Networking............................................................................................................ 20
Key Words: Triple Play, DSLAM Abstract: DSLAN product family developed by Huawei Technologies Co., Ltd. supports Triple Play function to realize unified access and management of video, voice and dial-up access services. This guide describes the Triple Play service configuration of DSLAN products. It is a reference for engineers. Abbreviation list:
Reference file:
CON=>Aux7/0/0
BAS
ETH5 VLAN10,VLAN102
E A
E A
ETH=>M-Ethernet7/0/1 MON
Internet
ETH8 20.1.1.1/30
D D A A
FE=>7/2/0 FE=>7/2/1 FE=>7/2/2 FE=>7/2/3
L2
VoIP
VLAN21 VLAN22
DHCP Server
Phone line
ESM
ADSL CPE LanSwitch ADSL CPE LanSwitch
MA5300
Video
IAD
STB
IAD
STB
DHCP Server
PC1
Phone 1
TV1
PC2
Phone 2
TV2
As shown in the figure above, the networking has the following features: Port 0/0/0 of the EADA board is connected with an ADSL CPE. The ADSL CPE is down linked with a LanSwitch. The LanSwitch is down linked with PC1, an IAD terminal and a STB terminal. Port 1/0/0 of the EADA board is connected with an ADSL CPE. The ADSL CPE is down linked with a LanSwitch. The LanSwitch is down linked with PC2, an IAD terminal and a STB terminal. PC1/PC2 adopts PPPOE access mode. Phone1/Phone2 connected with the IAD terminal adopts DHCP access mode. TV1/TV2 connected with the STB terminal adopts DHCP access mode. PC1/PC2 adopts Smart VLAN10 access. Phone1/Phone2 and TV1/TV2 adopts Smart VLAN20 access. The IAD terminal adopts VLAN21 access. Layer 3 interface address of the VLAN21 is 20.1.1.14/30. The STB terminal adopts VLAN22 access. Layer 3 interface address of the
2
VLAN22 is 20.1.1.18/30. The Management VLAN of the MA5300 is VLAN102, and the management address is 20.1.1.102/30. The IP address of PPPoE dial-in user (PC1/PC2) is 10.1.1.0/24. The IP address of the DHCP access user (Phone1/Phone2) connected with the IAD is 10.1.2.0/24. The network segment of the server IP address is 40.1.1.0/24. The IP address of the DHCP access user (TV1/TV2) connected with the STB is 10.1.3.0/24. The network segment of the multicast server IP address is 30.1.1.0/24. L2 transparently transmits VLAN10 and VLAN102 to the BAS, VLAN21 to the voice network, and VLAN22 to the video network. The ADSL user adopts default activation template. The ADSL CPE works in the 1483B mode. The CPE is configured with a PVC (VPI/VCI=0/35). Note that the following requirements must be satisfied: PC1 and PC2 can access Internet. Phone 1 and Phone 2 can access VoIP. TV1 and TV2 can access Video. Service priority of the IAD and the STB should be higher than that of PPPOE dial-up access. For guide to multicast service configurationm, please refer to the attachment.
MA5300(config-vlan10)#vlan-type smart MA5300(config-vlan10)#svlan-upport ethernet 7/2/0 MA5300(config-vlan10)#svlan-downport adsl 0/0/0 adsl 1/0/0 MA5300(config-vlan10)#exit MA5300(config)#vlan 20 MA5300(config-vlan20)#vlan-type smart MA5300(config-vlan20)#svlan-upport ethernet 7/2/0 MA5300(config-vlan20)#svlan-downport adsl 0/0/0 adsl 1/0/0 MA5300(config-vlan20)#exit //Set the VLAN ID for PPPOE service to 10 with priority of 1; set the VLAN ID for IAD-STB service to 20 with priority of 7. MA5300(config)#multi-service forward ppp enable vlan 10 priority 1 adsl 0/0/0 adsl 1/0/0 MA5300(config)#multi-service forward iad-stb vlan 20 priority 7 adsl 0/0/0 adsl1/0/0 //Add common VLAN21, VLAN22 and management VLAN102. VLAN21, VLAN22 and VLAN102 can be tranmistted through the uplink interface. Configure the IP address of each VLAN interface. Configure Layer 3 interface of the management VLAN. MA5300(config)#vlan 21 to 22 MA5300(config)#vlan 102 MA5300(config-vlan102)#exit MA5300(config)#interface ethernet 7/2/0 MA5300(config-if-Ethernet7/2/0)#switchport trunk allowed vlan 21 22 102 Please wait... Done. MA5300(config-if-Ethernet7/2/0)#exit MA5300(config)#interface vlan-interface 21 MA5300(config-if-Vlan-interface21)#ip address 20.1.1.14 255.255.255.252 MA5300(config-if-Vlan-interface21)#exit MA5300(config)#interface vlan-interface 22 MA5300(config-if-Vlan-interface22)#ip address 20.1.1.18 255.255.255.252 MA5300(config-if-Vlan-interface22)#exit
MA5300(config)#interface vlan-interface 102 MA5300(config-if-Vlan-interface102)#ip address 20.1.1.102 255.255.255.252 MA5300(config-if-Vlan-interface102)#exit //Configure MAC-based DHCP Relay function to make the IAD and the STB obtain IP addresses of different network segments on the DHCP Server MA5300(config)#dhcp relay-mode layer-3 MA5300(config)#dhcp-server 0 ip 30.1.1.253 MA5300(config)#dhcp-server select-mode mac-range MA5300(config)#dhcp mac-range mac_for_iad MA5300(config-mac-range-mac_for_iad)#start 00-50-ba-00-00-00 end 00-50-ba-ff-ff-ff MA5300(config-mac-range-mac_for_iad)#dhcp-server 0 MA5300(config-mac-range-mac_for_iad)#exit MA5300(config)#dhcp mac-range mac_for_stb MA5300(config-mac-range-mac_for_stb)#start 00-b0-d0-00-00-00 end 00-b0-d0-ff-ff-ff MA5300(config-mac-range-mac_for_iad)#dhcp-server 0 MA5300(config-mac-range-mac_for_iad)#exit MA5300(config)#interface vlan-interface 20 MA5300(config-if-Vlan-interface20)#ip address 10.1.2.254 255.255.255.0 MA5300(config-if-Vlan-interface20)#ip address 10.1.3.254 255.255.255.0 secondary MA5300(config-if-Vlan-interface20)#dhcp mac-range mac_for_iad gateway 10.1.2.254 MA5300(config-if-Vlan-interface20)#dhcp mac-range mac_for_stb gateway 10.1.3.254 MA5300(config-if-Vlan-interface20)#exit //Add default route and the routes for multicast sources or servers according to actual conditions. MA5300(config)#ip route 40.1.1.0 255.255.255.0 20.1.1.13 MA5300(config)#ip route 30.1.1.0 255.255.255.0 20.1.1.17 MA5300(config)#ip route 0.0.0.0 0.0.0.0 20.1.1.101 //Enable IGMP-PROXY function in the MA5300. Then, add 3 programs and set ADSL user authority. MA5300(config)#igmp-proxy enable Enable IGMP-Proxy ok.
MA5300(config)#igmp-proxy default-source 30.1.1.253 MA5300(config)#igmp-proxy uplink-port ethernet 7/2/0 vlan 22 MA5300(config)#igmp-proxy program add index 1 name 224.10.0.1 ip 224.10.0.1 MA5300(config)#igmp-proxy program add index 2 name 224.10.0.2 ip 224.10.0.2 MA5300(config)#igmp-proxy program add index 3 name 224.10.0.3 ip 224.10.0.3 MA5300(config)#igmp-proxy profile add index 1 name cctv MA5300(config)#igmp-proxy profile modify index 1 join program index 1 to 3 MA5300(config)#igmp-proxy user adsl 0/0/0 bind profile index 1 max-program-number 2 MA5300(config)#igmp-proxy user adsl 1/0/0 bind profile index 1 max-program-number 2 //Create standard ACL99 to map video packets; create extend ACL100 to map voice packets. MA5300(config)#access-list 99 permit 30.1.1.0 0.0.0.255 MA5300(config)#access-list 100 permit any 10.1.2.0 0.0.0.255 MA5300(config)#interface ethernet 7/2/0 MA5300(config-if-Ethernet7/2/0)#traffic-priority input ip-group 99 cos video MA5300(config-if-Ethernet7/2/0)#traffic-priority input ip-group 100 cos voice MA5300(config-if-Ethernet7/2/0)#exit //Activate ADSL ports and enable igmp-proxy quick-leave function on the ADSL ports. MA5300(config)#adsl activate adsl 0/0/0 1 MA5300(config)#adsl activate adsl 1/0/0 1 MA5300(config)#igmp-proxy router quick-leave adsl 0/0/0 MA5300(config)#igmp-proxy router quick-leave adsl 1/0/0
CON=>Aux7/0/0
BAS
ETH5 VLAN10,VLAN102
E A
E A
ETH=>M-Ethernet7/0/1 MON
Internet
ETH8 20.1.1.1/30
D D A A
FE=>7/2/0 FE=>7/2/1 FE=>7/2/2 FE=>7/2/3
L2
VoIP
VLAN21 VLAN22
DHCP Server
Phone line
ESM
ADSL CPE LanSwitch ADSL CPE LanSwitch
MA5300
Video
IAD
STB
IAD
STB
DHCP Server
PC1
Phone 1
TV1
PC2
Phone 2
TV2
As shown in the figure above, the networking has the following features: Port 0/0/0 of the EADA board is connected with an ADSL CPE. The ADSL CPE is down linked with a LanSwitch. The LanSwitch is down linked with PC1, an IAD terminal and a STB terminal. Port 1/0/0 of the EADA board is connected with an ADSL CPE. The ADSL CPE is down linked with a LanSwitch. The LanSwitch is down linked with PC2, an IAD terminal and a STB terminal. PC1/PC2 adopts PPPOE access mode. Phone1/Phone2 connected with the IAD terminal adopts DHCP access mode. TV1/TV2 connected with the STB terminal adopts DHCP access mode. PC1/PC2 adopts Smart VLAN10 access. The IAD adopts Smart VLAN21 access. Layer 3 interface address of the Smart VLAN21 is 20.1.1.14/30. The STB adopts Smart VLAN22 access. Layer 3 interface address of the Smart VLAN22 is 20.1.1.18/30. The management VLAN of the MA5300 is VLAN102, and the management address is 20.1.1.102/30. The IP address of PPPoE dial-in user (PC1/PC2) is 10.1.1.0/24. The IP address of the DHCP access user (Phone1/Phone2) connected with the IAD is 10.1.2.0/24. The network segment of the server IP address is 40.1.1.0/24.
The IP address of the DHCP access user (TV1/TV2) connected with the STB is 10.1.3.0/24. The network segment of the multicast server IP address is 30.1.1.0/24. L2 transparently transmits VLAN10 and VLAN102 to the BAS, VLAN21 to the voice network, and VLAN22 to the video network. The ADSL user adopts default activation template. The ADSL CPE works in the 1483B mode. The CPE is configured with PVC1(VPI/VCI=0/35), PVC2 (VPI/VCI=0/36) and PVC3 (VPI/VCI=0/37). Note that the following requirements must be satisfied: PC1 and PC2 can access Internet. Phone 1 and Phone 2 can access VoIP. TV1 and TV2 can access Video. Service priority of the IAD and the STB should be higher than that of PPPOE dial-up access. For multicast server configuration, please refer to section Triple Play Service Single PVC Solution.
MA5300(config-vlan21)#exit MA5300(config)#vlan 22 MA5300(config-vlan22)#vlan-type smart MA5300(config-vlan22)#svlan-upport ethernet 7/2/0 MA5300(config-vlan22)#exit MA5300(config)#multipvc modify adsl 0/0/0 pvcindex 1 vlan 10 MA5300(config)#multipvc modify adsl 1/0/0 pvcindex 1 vlan 10 MA5300(config)#multipvc add adsl 0/0/0 pvcindex 2 vpi 0 vci 36 connect-type 1483b vlan 21 MA5300(config)#multipvc add adsl 1/0/0 pvcindex 2 vpi 0 vci 36 connect-type 1483b vlan 21 MA5300(config)#multipvc add adsl 0/0/0 pvcindex 3 vpi 0 vci 37 connect-type 1483b vlan 22 MA5300(config)#multipvc add adsl 1/0/0 pvcindex 3 vpi 0 vci 37 connect-type 1483b vlan 22 //Add management VLAN102, which can be transmitted through the uplink interface. Configure Layer 3 interface of the management VLAN. MA5300(config)#vlan 102 MA5300(config-vlan102)#exit MA5300(config)#interface ethernet 7/2/0 MA5300(config-if-Ethernet7/2/0)#switchport trunk allowed vlan 102 Please wait... Done. MA5300(config-if-Ethernet7/2/0)#exit //Configure Layer 3 addresses of VLAN21, VLAN22 and VLAN102. MA5300(config)#interface vlan-interface 21 MA5300(config-if-Vlan-interface21)#ip address 20.1.1.14 255.255.255.252 MA5300(config-if-Vlan-interface21)#exit MA5300(config)#interface vlan-interface 22 MA5300(config-if-Vlan-interface22)#ip address 20.1.1.18 255.255.255.252 MA5300(config-if-Vlan-interface22)#exit MA5300(config)#interface vlan-interface 102 MA5300(config-if-Vlan-interface102)#ip address 20.1.1.102 255.255.255.252 MA5300(config-if-Vlan-interface102)#exit // Configure MAC-based DHCP Relay function to make the IAD and the STB obtain IP addresses
of different network segments on the DHCP Server. MA5300(config)#dhcp relay-mode layer-3 MA5300(config)#dhcp-server 0 ip 30.1.1.253 MA5300(config)#dhcp-server select-mode mac-range MA5300(config)#dhcp mac-range mac_for_iad MA5300(config-mac-range-mac_for_iad)#start 00-50-ba-00-00-00 end 00-50-ba-ff-ff-ff MA5300(config-mac-range-mac_for_iad)#dhcp-server 0 MA5300(config-mac-range-mac_for_iad)#exit MA5300(config)#dhcp mac-range mac_for_stb MA5300(config-mac-range-mac_for_stb)#start 00-b0-d0-00-00-00 end 00-b0-d0-ff-ff-ff MA5300(config-mac-range-mac_for_iad)#dhcp-server 0 MA5300(config-mac-range-mac_for_iad)#exit MA5300(config)#interface vlan-interface 21 MA5300(config-if-Vlan-interface21)#ip address 10.1.2.254 255.255.255.0 secondary MA5300(config-if-Vlan-interface21)#dhcp mac-range mac_for_iad gateway 10.1.2.254 MA5300(config-if-Vlan-interface21)#exit MA5300(config)#interface vlan-interface 22 MA5300(config-if-Vlan-interface22)#ip address 10.1.3.254 255.255.255.0 secondary MA5300(config-if-Vlan-interface22)#dhcp mac-range mac_for_stb gateway 10.1.3.254 MA5300(config-if-Vlan-interface22)#exit //Add default route and the routes for multicast sources or servers according to actual conditions. MA5300(config)#ip route 40.1.1.0 255.255.255.0 20.1.1.13 MA5300(config)#ip route 30.1.1.0 255.255.255.0 20.1.1.17 MA5300(config)#ip route 0.0.0.0 0.0.0.0 20.1.1.101 ///Enable IGMP-PROXY function in the MA5300. Then, add 3 programs and set ADSL user authority. MA5300(config)#igmp-proxy enable Enable IGMP-Proxy ok. MA5300(config)#igmp-proxy default-source 30.1.1.253 MA5300(config)#igmp-proxy uplink-port ethernet 7/2/0 vlan 22
MA5300(config)#igmp-proxy program add index 1 name 224.10.0.1 ip 224.10.0.1 MA5300(config)#igmp-proxy program add index 2 name 224.10.0.2 ip 224.10.0.2 MA5300(config)#igmp-proxy program add index 3 name 224.10.0.3 ip 224.10.0.3 MA5300(config)#igmp-proxy profile add index 1 name cctv MA5300(config)#igmp-proxy profile modify index 1 join program index 1 to 3 MA5300(config)#igmp-proxy user adsl 0/0/0 bind profile index 1 max-program-number 2 MA5300(config)#igmp-proxy user adsl 1/0/0 bind profile index 1 max-program-number 2 // Create standard ACL99 to map video packets; create extend ACL100 to map voice packets. MA5300(config)#access-list 99 permit 30.1.1.0 0.0.0.255 MA5300(config)#access-list 100 permit any 10.1.2.0 0.0.0.255 MA5300(config)#interface ethernet 7/2/0 MA5300(config-if-Ethernet7/2/0)#traffic-priority input ip-group 99 cos video MA5300(config-if-Ethernet7/2/0)#traffic-priority input ip-group 100 cos voice MA5300(config-if-Ethernet7/2/0)#exit //Activate ADSL ports and enable igmp-proxy quick-leave function on the ADSL ports. MA5300(config)#adsl activate adsl 0/0/0 1 MA5300(config)#adsl activate adsl 1/0/0 1 MA5300(config)#igmp-proxy router quick-leave adsl 0/0/0 MA5300(config)#igmp-proxy router quick-leave adsl 1/0/0
CON
BAS
ETH5 VLAN10,VLAN102
ETH MON
Internet
ETH8 20.1.1.1/30
D D E F E F
L2
VoIP
FE=>0/7/2 FE=>0/7/3 FE=>0/7/4 FE=>0/7/5 VLAN10 VLAN10
DHCP Server
Phone line
SCU
ADSL CPE LanSwitch ADSL CPE LanSwitch
Video
IAD
STB
IAD
STB
DHCP Server
PC1
Phone 1
TV1
PC2
Phone 2
TV2
As shown in the figure above, the networking has the following features: Port 0/0/0 of the ADEF board is connected with an ADSL CPE. The ADSL CPE is down linked with a LanSwitch. The LanSwitch is down linked with PC1, an IAD terminal and a STB terminal. Port 0/1/0 of the ADEF board is connected with an ADSL CPE. The ADSL CPE is down linked with a LanSwitch. The LanSwitch is down linked with PC2, an IAD terminal and a STB terminal. PC1/PC2 adopts PPPOE access mode. Phone1/Phone2 connected with the IAD terminal adopts DHCP access mode. TV1/TV2 connected with the STB terminal adopts DHCP access mode. PC1/PC2 adopts Smart VLAN10 access. Phone1/Phone2 and TV1/TV2 adopt Smart VLAN10 access. Layer 3 interface address of the MA5600 Smart VLAN10 is 20.1.1.249/29. The management VLAN of the MA5600 is VLAN102, and the management
1
address is 20.1.1.102/30. The IP address of PPPoE dial-in user (PC1/PC2) is 10.1.1.0/24. The IP address of the DHCP access user (Phone1/Phone2) connected with the IAD is 10.1.2.0/24. The network segment of the server IP address is 40.1.1.0/24. The IP address of the DHCP access user (TV1/TV2) connected with the STB is 10.1.3.0/24. The network segment of the multicast server IP address is 30.1.1.0/29. L2 transparently transmits VLAN10 and VLAN102 to the BAS, VLAN10 to the voice network, and VLAN10 to the video network. The ADSL user adopts default activation template. The ADSL CPE works in the 1483B mode. The CPE is configured with a PVC (VPI/VCI=0/35). Note that the following requirements must be satisfied: PC1 and PC2 can access Internet. Phone 1 and Phone 2 can access VoIP. TV1 and TV2 can access Video. Service priority of the IAD and the STB should be higher than that of PPPOE dial-up access. For multicast server configuration, please refer to section Triple Play Service Single PVC Solution.
//Configure MAC-based DHCP Relay function to make the IAD and the STB obtain IP addresses of different network segments on the DHCP Server. MA5600(config)#dhcp mode layer-3 mac-range MA5600(config)#dhcp-server 0 ip 30.1.1.253 MA5600(config)#dhcp mac-range mac_for_iad MA5600(config-mac-range-mac_for_iad)#mac-range 0050-ba00-0000 to 0050-baff-ffff MA5600(config-mac-range-mac_for_iad)#dhcp-server 0 MA5600(config-mac-range-mac_for_iad)#quit MA5600(config)#dhcp mac-range mac_for_stb MA5600(config-mac-range-mac_for_stb)#mac-range 00b0-d000-0000 to 00b0-d0ff-ffff MA5600(config-mac-range-mac_for_stb)#dhcp-server 0 MA5600(config-mac-range-mac_for_stb)#quit MA5600(config)#interface vlanif 10 MA5600(config-if-vlanif10)#ip address 20.1.1.249 255.255.255.240 MA5600(config-if-vlanif10)#ip address 10.1.2.254 255.255.255.0 sub MA5600(config-if-vlanif10)#ip address 10.1.3.254 255.255.255.0 sub MA5600(config-if-vlanif10)#dhcp mac-range mac_for_iad gateway 10.1.2.254 MA5600(config-if-vlanif10)#dhcp mac-range mac_for_stb gateway 10.1.3.254 MA5600(config-if-vlanif10)#quit //Add default route and the routes for multicast sources or servers according to actual conditions. MA5600(config)#ip route 40.1.1.0 255.255.255.0 20.1.1.253 MA5600(config)#ip route 30.1.1.0 255.255.255.0 20.1.1.254 MA5600(config)#ip route 0.0.0.0 0.0.0.0 20.1.1.101 //BTV service configuration MA5600(config)#btv MA5600(config-btv)#igmp proxy enable MA5600(config-btv)#igmp video-port vpi 0 vci 35 MA5600(config-btv)#igmp uplink-port 0/7/2 10 MA5600(config-btv)#igmp program add ip 224.10.0.1 vlan 10 bind 0/7/2 MA5600(config-btv)#igmp program add ip 224.10.0.2 vlan 10 bind 0/7/2
MA5600(config-btv)#igmp program add ip 224.10.0.3 vlan 10 bind 0/7/2 MA5600(config-btv)#igmp profile profile-index 0 ip 224.10.0.1 to-ip 224.10.0.3 watch MA5600(config-btv)#igmp user add port 0/0/0 no-auth MA5600(config-btv)#igmp user add port 0/1/0 auth max-program 2 MA5600(config-btv)#igmp user bind-profile port 0/1/0 profile-index-list 0 // Create standard ACL2000 to map video packets; create extend ACL3000 to map voice packets. MA5600(config)#acl 2000 MA5600(config-acl-basic-2000)#rule permit source 30.1.1.0 0.0.0.255 MA5600(config-acl-basic-2000)#quit MA5600(config)#traffic-priority inbound ip-group 2000 cos video port 0/7/2 MA5600(config)#acl 3000 MA5600(config-acl-adv-3000)#rule permit ip destination 10.1.2.0 0.0.0.255 source any MA5600(config-acl-basic-3000)#quit MA5600(config)#traffic-priority inbound ip-group 3000 cos voice port 0/7/2
CON
BAS
ETH5 VLAN10,VLAN102
ETH MON
Internet
ETH8 20.1.1.1/30
D D E F E F
L2
VoIP
FE=>0/7/2 FE=>0/7/3 FE=>0/7/4 FE=>0/7/5 VLAN21 VLAN22
DHCP Server
Phone line
SCU
ADSL CPE LanSwitch ADSL CPE LanSwitch
Video
IAD
STB
IAD
STB
DHCP Server
PC1
Phone 1
TV1
PC2
Phone 2
TV2
As shown in the figure above, the networking has the following features: Port 0/0/0 of the ADEF board is connected with an ADSL CPE. The ADSL CPE is down linked with a LanSwitch. The LanSwitch is down linked with PC1, an IAD terminal and a STB terminal. Port 0/1/0 of the ADEF board is connected with an ADSL CPE. The ADSL CPE is down linked with a LanSwitch. The LanSwitch is down linked with PC2, an IAD terminal and a STB terminal. PC1/PC2 adopts PPPOE access mode. Phone1/Phone2 connected with the IAD adopts DHCP access mode. TV1/TV2 connected with the STB terminal adopts DHCP access mode. PC1/PC2 adopts Smart VLAN10 access. The IAD adopts Smart VLAN21 access. Layer 3 interface address of the Smart VLAN21 is 20.1.1.14/30. The STB adopts Smart VLAN22 access. Layer 3 interface address of the Smart VLAN22 is 20.1.1.18/30. The management VLAN of the MA5600 is VLAN102, and the management address is 20.1.1.102/30. The IP address of PPPoE dial-in user (PC1/PC2) is 10.1.1.0/24. The IP address of the DHCP access user (Phone1/Phone2) connected with the IAD is 10.1.2.0/24. The network segment of the server IP address is 40.1.1.0/24.
The IP address of the DHCP access user (TV1/TV2) connected with the STB is 10.1.3.0/24. The network segment of the multicast server IP address is 30.1.1.0/24. L2 transparently transmits VLAN10 and VLAN102 to the BAS, VLAN21 to the voice network, and VLAN22 to the video network. The ADSL user adopts default activation template. The ADSL CPE works in the 1483B mode. The CPE is configured with PVC1 (VPI/VCI=0/35), PVC2 (VPI/VCI=0/36) and PVC3 (VPI/VCI=0/37). Note that the following requirements must be satisfied: PC1 and PC2 can access Internet. Phone 1 and Phone 2 can access VoIP. TV1 and TV2 can access Video. Service priority of the IAD and the STB should be higher than that of PPPOE dial-up access. For multicast server configuration, please refer to section Triple Play Service Single PVC Solution.
MA5600(config)#service-port vlan 10 adsl 0/0/0 vpi 0 vci 35 rx-cttr 12 tx-cttr 12 MA5600(config)#service-port vlan 10 adsl 0/1/0 vpi 0 vci 35 rx-cttr 12 tx-cttr 12 //Configure VLAN21, VLAN22 and uplink/downlink ports for the IAD and the STB. MA5600(config)#vlan 21 smart MA5600(config)#vlan 22 smart MA5600(config)#port vlan 21 0/7 2 MA5600(config)#port vlan 22 0/7 2 MA5600(config)#service-port vlan 21 adsl 0/0/0 vpi 0 vci 36 rx-cttr 10 tx-cttr 10 MA5600(config)#service-port vlan 22 adsl 0/0/0 vpi 0 vci 37 rx-cttr 11 tx-cttr 11 MA5600(config)#service-port vlan 21 adsl 0/1/0 vpi 0 vci 36 rx-cttr 10 tx-cttr 10 MA5600(config)#service-port vlan 22 adsl 0/1/0 vpi 0 vci 37 rx-cttr 11 tx-cttr 11 //Configure MAC-based DHCP Relay function to make the IAD and the STB obtain IP addresses of different network segments on the DHCP Server. MA5600(config)#dhcp mode layer-3 mac-range MA5600(config)#dhcp-server 0 ip 30.1.1.253 MA5600(config)#dhcp mac-range mac_for_iad MA5600(config-mac-range-mac_for_iad)#mac-range 0050-ba00-0000 to 0050-baff-ffff MA5600(config-mac-range-mac_for_iad)#dhcp-server 0 MA5600(config-mac-range-mac_for_iad)#quit MA5600(config)#dhcp mac-range mac_for_stb MA5600(config-mac-range-mac_for_stb)#mac-range 00b0-d000-0000 to 00b0-d0ff-ffff MA5600(config-mac-range-mac_for_stb)#dhcp-server 0 MA5600(config-mac-range-mac_for_stb)#quit MA5600(config)#interface vlanif 21 MA5600(config-if-vlanif21)#ip address 20.1.1.254 255.255.255.252 MA5600(config-if-vlanif21)#ip address 10.1.2.254 255.255.255.0 sub MA5600(config-if-vlanif21)#dhcp mac-range mac_for_iad gateway 10.1.2.254 MA5600(config-if-vlanif21)#quit MA5600(config)#interface vlanif 22 MA5600(config-if-vlanif22)#ip address 20.1.1.249 255.255.255.252
MA5600(config-if-vlanif22)#ip address 10.1.3.254 255.255.255.0 sub MA5600(config-if-vlanif22)#dhcp mac-range mac_for_stb gateway 10.1.3.254 MA5600(config-if-vlanif22)#quit // Add default route and the routes for multicast sources or servers according to actual conditions. MA5600(config)#ip route 40.1.1.0 255.255.255.0 20.1.1.253 MA5600(config)#ip route 30.1.1.0 255.255.255.0 20.1.1.250 MA5600(config)#ip route 0.0.0.0 0.0.0.0 20.1.1.101 //BTV service configuration MA5600(config)#btv MA5600(config-btv)#igmp proxy enable MA5600(config-btv)#igmp video-port vpi 0 vci 37 MA5600(config-btv)#igmp uplink-port 0/7/2 22 MA5600(config-btv)#igmp program add ip 224.10.0.1 vlan 22 bind 0/7/2 MA5600(config-btv)#igmp program add ip 224.10.0.2 vlan 22 bind 0/7/2 MA5600(config-btv)#igmp program add ip 224.10.0.3 vlan 22 bind 0/7/2 MA5600(config-btv)#igmp profile profile-index 0 ip 224.10.0.1 to-ip 224.10.0.3 watch MA5600(config-btv)#igmp user add port 0/0/0 no-auth max-program 2 MA5600(config-btv)#igmp user add port 0/1/0 auth max-program 2 MA5600(config-btv)#igmp user bind-profile port 0/1/0 profile-index-list 0
BAS
A A
ETH5 VLAN10,VLAN102
Internet
ETH8 20.1.1.1/30
D D L E L E
CON MON ETH
L2
VLAN22
Phone line
MMX
ADSL CPE ADSL CPE
LAND
Video
MA5100
DHCP Server
HUB STB1
HUB STB2
PC1
TV1
PC2
TV2
As shown in the figure above, the networking has the following features: Port 0 of slot 0 of the ADLE board is connected with an ADSL CPE. The ADSL CPE is down linked with a LanSwitch. The LanSwitch is down linked with PC1 and a STB terminal. Port 0 of slot 1 of the ADLE board is connected with an ADSL CPE. The ADSL CPE is down linked with a LanSwitch. The LanSwitch is down linked with PC2 and a STB terminal. PC1/PC2 adopts PPPOE access mode. TV1/TV2 connected with the STB terminal adopts DHCP access mode. PC1/PC2 adopts cell VLAN10 access. The STB adopts VLAN22 access. The management VLAN of the MA5100 is VLAN102, and the management address is 20.1.1.102/30. The IP address of PPPoE dial-in user (PC1/PC2) is 10.1.1.0/24. The IP address of the DHCP access user (TV1/TV2) connected with the STB is
2
10.1.3.0/24. The network segment of the multicast server IP address is 30.1.1.0/24. L2 transparently transmits VLAN10 and VLAN102 to the BAS, and VLAN22 to the video network. The ADSL user adopts default activation template. The ADSL CPE works in the 1483B mode. The CPE is configured with PVC1 (VPI/VCI=0/35) and PVC2 (VPI/VCI=0/36). Note that the following requirements must be satisfied: PC1 and PC2 can access Internet. TV1 and TV2 can access Video. Service priority of the IAD and the STB should be higher than that of PPPOE dial-up access. For multicast server configuration, please refer to section Triple Play Service Single PVC Solution.
MA5100(config-if-lan-0/15)#exit MA5100(config)#pvc adsl 0/0/0 region lan 0/15 vlan 10 off 0 anyvport_p anyvport_l rx-cttr 2 tx-cttr 2 MA5100(config)#pvc adsl 0/1/0 region lan 0/15 vlan 10 off 0 anyvport_p anyvport_l rx-cttr 2 tx-cttr 2 MA5100(config)#interface adsl 0/0 MA5100(config-if-adsl-0/0)#activate 0 100 MA5100(config-if-adsl-0/0)#exit MA5100(config)#interface adsl 0/1 MA5100(config-if-adsl-0/1)#activate 0 100 MA5100(config-if-adsl-0/1)#exit //Configure STB user data MA5100(config)#interface lan 0/15 MA5100(config-if-lan-0/15)#vlan add 22 region 0 35 MA5100(config-if-lan-0/15)#exit MA5100(config)#pvc adsl 0/0/0 region lan 0/15 vlan 22 off 6 anyvport_p anyvport_l rx-cttr 5 tx-cttr 5 MA5100(config)#pvc adsl 0/1/0 region lan 0/15 vlan 22 off 6 anyvport_p anyvport_l rx-cttr 5 tx-cttr 5 //Configure multicast data MA5100(config)#ntv mode proxy MA5100(config)#ntv user-monitor on MA5100(config)#ntv vpi 0 MA5100(config)#ntv vci 35 MA5100(config)#ntv default-vlan 22 MA5100(config)#ntv querier 30.1.1.253 MA5100(config)#igmp program add 1 224.10.0.1 22 disable MA5100(config)#igmp program add 2 224.10.0.2 22 disable MA5100(config)#igmp program add 3 224.10.0.3 22 disable MA5100(config)#igmp profile add cctv
MA5100(config)#igmp profile modify cctv add-program name 1 MA5100(config)#igmp profile modify cctv add-program name 2 MA5100(config)#igmp profile modify cctv add-program name 3 MA5100(config)#igmp pvc 0/15 3 rt-vbr MA5100(config)#igmp user add port 0/0/0 no-auth 2 MA5100(config)#igmp user add port 0/1/0 auth 2 MA5100(config)#igmp user right port 0/1/0 add profile-name cctv