Professional Documents
Culture Documents
Delta for EAF and Refining Furnace Taphole Blocks for EAF Gunning Mixes for EAF Taphole Filler for EAF
Delta Sections
Modern EAFs usually have a cast core piece in the cover. Horton supplies monolithic delta pieces for different furnace types using casting mixes, specially designed for an extremely long lifetime. We supply these delta sections in our assembly parts plant either tailored to customer's specifications or according to our own design and prepare them with special drying curves for direct application. We also supply the required casting mixes and offer supervision of the lining work on customer's site by our technical field service.
Al2O3+MgO % Min. Al2O3+Cr2O3 % Min. Bulk Density g/cm3 Min. Modulus of Rupture MPa Min. Cold Crushing Strength MPa. Min. Application
80
80
90 88
2.80 5 25 EAF, LF
2.85 10 60 EAF, LF
3.10 12 60 EAF, LF
3.00 6 40 EAF, VD
MgO CaO 100 x24h Bulk Density g/cm3 1500 x3h 100 x24h Cold Crushing Strength MPa 1500 x3h 100 x24h Modulus of Rupture MPa Water addition % Max. service temperature 1500 x3h
MgO CaO Fe2O3 Cold Crushing Strength MPa Bulk Density g/cm3 Grain Size mm Max. service temperature 1600 x3h 1600 x3h
Magnesia-carbon Bricks
On the basis of different application parts and conditions, using high-purity, high-density, large crystal magnesite and high-purity flake graphite as raw materials, adopting high-pressure shaping technique, and under the help of antioxidant, Horton supply series of magnesiacarbon bricks for EAF lining. The series of products have been widely used in steelworks worldwide. They show the features of high strength, excellent resistance against slag, good thermal shock resistance, high refractoriness etc., proving high performances.
MgO % Min. Al2O3 % Max. CaO % Max. Fe2O3 % Max. SiO2 % Max. C % Min. Bulk Density g/cm3 Min. Apparent Porosity % Min. Cold Crushing Strength MPa Min.
binder. Mono block taphole bricks are ISO-Pressed, while assembly taphole is formed by friction press. The series of products show good
Material Properties Refractoriness Apparent porosity % Cold crushing strength Mpa Permanent linear change % Chemical properties Al2O3 % HTN-50 1750 18 39.2 1400 x2h 0~-0.3 50 1400 x2h +0.1~-0.3 40 HTN-40 1710 17-25 HTN-60 1780 25 19.6 1500 x2h +0.2~-0.3 60 HTN-70 1790 27 19.6 1500 x2h +0.2~-0.3 70