Professional Documents
Culture Documents
http://www.tp-link.com/lk/article/?faqid=138
Why can not I access the Internet after connecting the TP-LINK router to my modem
Suitable for: Routers, 300Mbps Wireless N Routers, 150Mbps Wireless N Routers, 54Mbps Wireless G Routers, N750 Wireless Dual Band Routers, N600 Wireless Dual Band Routers, N900 Wireless Dual Band Routers
Problem Description:
If you can access the Internet by directly connecting your computer to the modem, but after you added a router into your network then find no Internet access, please try the solutions below:
1 of 4
8/19/2013 1:20 PM
Why can not I access the Internet after connecting the TP-LINK router to ...
http://www.tp-link.com/lk/article/?faqid=138
Note: if you can not access the web page, please check the IP address of your computer or reconfigure the IP address of your computer. Step 2 Type the username and password in the login page, the default username and password are both admin.
Note: 1. If you got a server error -401, it means you entered a wrong username or password. If you forget the user name or password that you set, you need to reset the router to factory default settings. 2. If the login page can not display, please refer to Why I can not log into the Web-based Utility/Management Page of TP-LINK wireless router to check the problem. Step 3 Click Network->WAN in the left menu , and change the WAN Connection Type to Dynamic IP Address then click the Save button.
Step 4 Wait for a few minutes and check the WAN part on the Status page, if it shows any IP address (similar as below), that means the connection between the Router and the Modem is established.
2 of 4
8/19/2013 1:20 PM
Why can not I access the Internet after connecting the TP-LINK router to ...
http://www.tp-link.com/lk/article/?faqid=138
Step 5 If the IP adress remains 0.0.0.0, please try Power Cycle or next method "Clone the MAC address".
1. Make sure that you are connected to the TP-LINK Router with the computer that was originally connected to your Cable modem, then log on to the management click Network->MAC Clone on the left side.
3 of 4
8/19/2013 1:20 PM
Why can not I access the Internet after connecting the TP-LINK router to ...
http://www.tp-link.com/lk/article/?faqid=138
2. Click Clone MAN Address,this function will clone your PCs MAC address to WAN MAC Address of the router.
If the this method still can not work, please try Power Cycle or next method.
Note: after you changed the LAN IP address, next time you need to use the new IP address to access the routers management page and renew a IP address for your computer
Related articles: How do I renew the IP address for my computer? How do I install TP-LINK router to work with a Cable Modem (Dynamic IP)
4 of 4
8/19/2013 1:20 PM