You are on page 1of 4

How to merge a backup SP FlashTool, to get the Root

Answer: # 3 " rua1 "February 6, 2012, 16:48


Step by step instructions with screenshots:
1. Make a scatter with MTKDroidTools
Scatter is a text file with the addresses of units required for the program SP FlashTool.
in the block map information is available for selection CWM (a modified recovery). Here go the link and read the
explanations for the selection of the appropriate body for a specific CWM. It is better to download in advance. It
will be useful in paragraph 7. Starting with version 2.4.0 CWM is done automatically! After creating scatter do not
close the main window of the program! Otherwise, once again will have to use your mobile phone.
2. In FlashTool choose this scatter and go to the tab Read Back
3. Select the path and file name ROM_
Push the button Add. Double-click the mouse click on the line that appears. Choose a name for the file name must
begin with ROM_, as proposed by FlashTool!. Remember the path and name.
4. Set the size ROM_
Type must be in HEX. In the Start Address must be written 0x000000. In the Length copy of scatter address block
following the RECOVERY, or the address of another block for a more complete backup. For phones with EXT4
partition type is the address of the block cache. The number in Hex format must start with 0x
5. Select the Read Page Only on phones with yaffs2 blocks
In FlashTool select Read Page Only in the Read Method. If this field is not present, then it may emerge window with
this issue, too, choose Page Only. On phones with EXT4 blocks is not selected (as a rule).
6. Read the ROM_
Read Back push button and connect the off the body to the PC. Problems and errors FT discussed in the following
report .
7. Preparing files for FlashTool and make CWM
If all went well, then open the window MTK Droid Root & Tools, we left at 1 point. If for some reason there is no
window, you have to turn on your phone and connect it to the program. The program tab root, backup, recovery
click the Create a backup of the ROM fleshtula and select the saved file in step 6 ROM_ *. Process begins sodaniya
blocks for FlashTool. Remember the name of the folder. When unzipped successfully boot will create patched boot
and will be asked to select a file from CWM like the phone. Selected CWM is checked against the connected phone,
and if the app creates a file of the new CWM.
8. CWM are sewn into the phone
Run FlashTool, choose to scatter established in paragraph 7 folder. remove the checkbox from all the blocks! Click
with the mouse on the RECOVERY CWM and select the file in the same folder, which was created in step 7. It will
expose the daw. Confirm that the jackdaw is only mod.rekveri and click Download , connect the cable to the PC and
expect to complete the process. Under no circumstances should this step instead of not using Download Firmware
Upgrade!
recovery.img file is merged with the phone name begins with the modified model and the date of admission phone
firmware. When disabling it DA Download All before sticking the cable must wait for the countdown to the bottom
bar. Problems and Errors FT discussed in the following report .
9. Make a backup, install SuperUser etc
Ship body mode CWM, connect and connect to the MTK Droid Root & Tools, go to the tab root, backup, recovery,
and by clicking on the tab on the right buttons do:
- Backup!!!
- set SuperUser (often mean "Get the Ruta (get root) "under it)
- remove Chinese programs
- Russian set the default language and time zone Moscow WARNING! Firmware boot blocks and CWM recovery
mode sometimes is not true! To restore the brick may require insertion of these blocks through SP
FlashTool! patched now flash the boot is not necessarily because after installing SuperUser all phones are rapidly
gaining temporary root shell on the button ROOT.
Record update.zip to root on the flash drive, and flashed it through CWM does not make sense! The program has
already done!

You might also like