You are on page 1of 31

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here

Give credit where credit is due, huge thanks to all the teams involved for making it possible
This procedure was performed using a Vu+ solo 2 receiver with Black Hole 2.0.2 image
and a Computer with windows 7 (64bit) other Vu+ receivers and images may work differently
Part 1 Installing Black Hole image
What you need
1. Vu+ receiver
2. USB flash drive a minimum of 128MB which can be fully formatted
3. Computer with windows
Step 1: If you have a hard drive for your Vu+ receiver install it now Click Here if not please continue
Connect all necessary cables to your Vu+ receiver Ethernet/Network cable to your internet HDMI/SCART
to your TV & the cable from your LNB/dish etc..
Now connect the power cable but do not turn on your receiver at this time if your receiver is already all
connected up and running turn the power off with the switch on the back.

Step 2: Insert a USB flash drive into a USB port on your Computer and format it has Fat or Fat 32
I recommend you Sign up Here it's free & Download the latest Black Hole image for your Vu+ from Here
Make sure that you choose the correct model for your Vu+ receiver mine is Vu + solo 2
If you don't want to sign up or you have a clone download the latest image from Here

Step 3: Choose a location to save the .Zip file (Desktop is recommended) and Click "Save"


Step 4: "Right-Click" the .Zip file that you have just downloaded & Click "Extract All"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 5: Click "Browse"

Step 6: Select your USB flash drive has your destination and Click "OK" mine is Removable Disk (F:)

Step 7: Check your destination is correct & Click "Extract" to extract to the root of your USB flash drive

Step 8: Extracting may take 5-10 minutes to complete

Step 9: Now you should have a vuplus folder on the root of your USB drive in that your model Vu+ folder

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 10: Take your USB drive to your Vu+ receiver and insert it into the front USB port on your receiver &
turn the power on your receiver with the switch on the back

Step 11: You should see a message appear on the front display, mine is Update, Press Power i Press Power
You follow the instructions on your front display, if you miss the message just power off & on at the back

Step 12: First boot after update setup your Vu+ Select Video Output mine is "HDMI" Press "OK"

Step 13: Select Video Output mine is "1080p" Press "OK" You Select the one that suit your TV
PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 14: Select Video Output i Select "No" to the test Press "OK" You can run the test if you like

Step 15: BH Welcome... Select your language mine is "English" Press "OK"

Step 16: BH Welcome...Start Press "OK"

Step 17: BH Welcome...Start i Select "Use wizard to set up basic features" Press "OK"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 18: BH Welcome...Start fixed single satellite dish "Simple", "Single", "your satellite" Press "OK"

Step 19: BH Welcome...Start motorised dish using USALS
First get your longitude & latitude info from Here by entering your post code
Example if i enter UK postal code: SE1 6JZ i get the following LON -0.1042 & LAT: 51.4979

Configuration Mode: Simple
Mode: Positioner
Longitude: 0.104 (Make sure you enter your own Longitude settings here)
WEST
Latitude: 51.497 (Make sure you enter your own Latitude settings here)
NORTH

Step 20: BH Welcome...Start if you have a tuner B setup now

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 21: BH Welcome...Start i Select "No" to the default sat lists Press "OK" You can if you like

Step 22: BH Welcome...Start i Select "No, scan later manually" Press "OK"

Step 23: BH Welcome...Start i Select "No" to parental control Press "OK"

Step 24: BH Welcome...Net Press "OK"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 25: BH Welcome...Net i Select "Yes" to Use Interface & DHCP Press "OK" this works for me

Step 26: BH Welcome...Net Press "OK"

Step 27: Press "Exit" to exit out of the Channel Selection to the main screen

Step 28: Press "Menu" in to BH Main Menu and Select "Setup" Press "OK"

Step 29: Select "System" Press "OK"

Step 30: Select "Timezone" Press "OK"

Step 31: Now select your "Timezone" Press "Green" to OK & save now exit back to the main screen

End of Part 1 if you install a hard drive please configure now Click Here
If not please continue to Part 2 Install Channel List Click Here
PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Part 2 Install Channel List
Step 1: Main screen using your remote Press "Green" then Press "Yellow" into BH Addons Manager

Step 2: Select "Addons Download Manager" Press "OK"

Step 3: Select "Black Hole Settings" Press "OK"

Step 4: Select a Channel List you want to install Press "OK" i select "Catseye Motor" a good list

Step 5: Press "Green" to Download

Step 6: When prompted "Do you want to install the Addon:" Press "Yes"
Then prompted with "Enigma2 will now be restarted to complete package installation" Press "OK"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 7: Now you have a Channel List, Repeat Part 2 to update to the latest channel list at anytime

End of Part 2
Select where you would like to go next from the index below or continue to Part 3 Click Here
Guide index
Part 1 Installing Black Hole image
Part 2 Install Channel List
Part 3 Install TS Panel (optional) Everything you need for your image
Part 4 Install Cccam for C or N lines from TS Panel (optional) This requires Part 3 Install TS Panel
Part 5 EPG & CrossEPG Setup (optional) This will give you 7 days EPG
Part 6 Install 1Channel & IceFilms (optional) These 2 great plugins give you on demand movies/series
Part 7 Installing a Hard Drive (optional)
Part 8 Configure your hard drive
When i release any updates for this guide they will be available Here please book mark this page.
Give credit where credit is due, huge thanks to all the teams involved for making this possible.
Here are some useful websites for help & support and to keep you up to date and much more
Vuplus Community Click Here , Vu+ Team Click Here , Linuxsat Support Click Here ,
Alsat Forum Click Here , CS Kings.biz Click Here , CS Kings.org Click Here , Digital Kaos Click Here ,
Cardsharing.ws Click Here , UltimateCS Click Here , LiveOnSat Click Here , KingOfSat Click Here ,
LyngSat Click Here , Satelliweb Click Here ,




Part 3 Install TS Panel (optional)
PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 1: Main screen using your remote Press "Menu" into BH Main Menu & Select "Setup" Press "OK"

Step 2: Select "System" Press "OK"

Step 3: Select "Network" Press "OK"

Step 4: Select "Adapter settings" Press "OK"

Step 5: Now write down your IP Address & Exit back out to the main screen by Pressing "Exit"

Step 6: Now go back to your Computer with your "IP Address"
Step 7: Download VU+ Control Centre V0.6.zip from Here
Step 8: Choose a location to save the .Zip file (Desktop is recommended) and Click "Save"

Step 9: On your Desktop "Right-Click" the .Zip file that you have just downloaded & Click "Extract All"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 10: Click "Extract" to extract to your Desktop

Step 11: On your Desktop "Double Click" into the "VU+ Control Centre V0.6" folder

Step 12: Double Click"VUCC.exe" to run the program, prompted with "Security Warning" Press "Run"

Step 13: IP Address: Enter your Vu+ IP address from step 38, example "192.168.1.10"
Username: Enter "root"
Password: "leave it blank" if you have not changed the password on your Vu+ receiver,
WebControl Port: Enter "80"
FTP Port: Enter "21"
Telnet Port: Enter "23"
Click "Connect"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 14: Login successful. Click "IPK Installer"

Step 15: IPK Filename Click the "..." Button to select the local directory where the "ipk" file is located.

Step 16: Click "Desktop" Double Click into the "VU+ Control Centre V0.6" folder

Step 17: Select "enigma2-plugin-extensions-tspanel_**_mips32el.ipk" then Click "Open"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 18: Click "Upload and Install IPK File" to install TS Panel on your Vu+ receiver

Step 19: When prompted "plugin installed successfully * E2 restartnis required" Restart E2 Vu+

Step 20: On your Vu+ Press "Menu" into BH Main Menu & Select "Black Hole Shutdown" Press "OK"

Step 21: Select "Restart Enigma2" Press "OK" and wait for the Vu+ receiver to reboot

Step 22: Now you can start using TS Panel

End of Part 3 please continue to Part 4 Click Here or return to index Click Here
PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Part 4 Install Cccam for C or N lines from TS Panel (optional)
Step 1: Main screen using your remote Press "Green" into Green Panel & Select "TSpanel" Press "OK"

Step 2: Select "Addons" Press "OK"

Step 3: Select "linuxsat_support_Addons" Press "OK"

Step 4: Select " { Cams - Blackhole 2 } " Press "OK/Green"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 5: Select the Cccam you want to install & Press "OK/Green" i Select "Cccam 2.2.1"

Step 6: When prompted "Execution finished" Press "Blue" to restart enigma wait for reboot

Step 7: Vu+ main screen Press "Blue" Blue Panel Use Left/Right to select a cam Press "OK" to start

Step 8: Back to your Computer & Double Click "VUCC.exe" to run VU+ Control Centre
Click "Connect" Now Click "FTP"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 9: When prompted "Welcome to FileZilla" Click "OK"

Step 10: In FileZilla on the Left side is your computer folders & the Right side is your Vu+ Receiver folders
Right side Click "/" folder then Click "etc" folder & Right-Click the "CCcam.cfg" & Click "View/Edit"

Step 11: Should open with notepad Right-Click "Select All"

Step 12: Press "Delete" on your keyboard

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 13: Now your CCcam.cfg is empty you can add your C or N lines

Step 14: Now add your C or N lines, you can Copy/Paste to your CCcam.cfg.


Step 15: Click "File" and Click "Save" to save your lines to your CCcam.cfg.

Step 16: When prompted "File has changed" Click "Yes"

End of Part 4 please continue to Part 5 Click Here or return to index Click Here
PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Part 5 EPG & CrossEPG Setup (optional)
Step 1: Main screen using your remote Press "Blue" into BH Blue Panel and Press "Red" EPG Panel

Step 2: Press "Red" Global Settings

Step 3: Enable the setting you want i have all Enable as shown below
Path to save Epg File: If you are using internal memory set it to: /media/cf/epg.dat
If you are using hard drive set it to: /hdd/epg.dat or if using USB drive set it to: /media/usb/epg.dat
Press "Red" to save
PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 4: Now Select "Rytec-SKYUK" and Press "Green" Provider Settings

Step 5: Press "Red" Settings,

Step 6: Enable Automatic EPG Refresh "yes"
Refresh EPG every day at time "04:00" enter a time that suits you for this action
Press "Red" to save

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 7: Press "Yellow" Download now

Step 8: Epg Download complete. Press "Red" Close

Step 9: Press "Menu" into BH Main Menu and Select "Backup Menu" Press "OK"

Step 10: Select "BlackHole Epg Backup" Press "OK"

Step 11: Press "Green" Setup

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 12: Enable Automatic EPG Backup "yes"
Path to save Backup Epg File: If you are using hard drive /media/hdd or using USB drive /media/usb
Press "Red" to save

Step 13: Now you have everything setup, if you lose your EPG just Press "Red" Restore in this menu

Setup CrossEPG recommend you to have a USB drive or hard drive install for this
Step 1: Main screen using your remote Press "Menu" into BH Main Menu & Select "Setup" Press "OK"

Step 2: Select "CrossEPG" Press "OK"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 3: Select "Configure" Press "OK"

Step 4: Enable the setting you want i have the following enable as shown below
Storage device: If you are using hard drive /media/hdd or using USB drive /media/usb
Enable csv import "yes"
Force epg reload on boot "yes"
Download on tune "yes"
Scheduled download "once a day"
Scheduled download at "04:00" enter a time that suits you for this action
Show as plugin "yes"
Show as extension "yes"
Show 'Force reload' as plugin "no"
Press "Red" to go Back

Step 5: Select "OpenTV providers" Press "OK"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 6: Select "Sky UK OpenTV (Astra2 on 28.2)" Press "Green" Enable then "Yellow" to Download


Step 7: Main screen using your remote Press "up" to bring up your channels and Press "3" for Multi Epg

End of Part 5 please continue to Part 6 Click Here or return to index Click Here
PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Part 6 Install 1Channel & IceFilms (optional)
Step 1: Main screen using your remote Press "Green" Green Panel Press "Yellow" BH Addons Manager

Step 2: Select "Addons Download Manager" Press "OK"

Step 3: Select "Black Hole Addons Plugins" Press "OK"

Step 4: Select "1Channel" Press "OK"

Step 5: Press "Green" Download

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 6: Select "yes" Press "OK"

Step 7: Still in Black Hole Addons Plugins Select "IceFilms Preview" Press "OK"

Step 8: Press "Green" Download

Step 9: Select "yes" Press "OK"

Step 10: Restart your receiver
PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Using IceFilms
Step 1: Using your remote Press "Green" into BH Green Panel & Select "IceFilms Preview" Press "OK"

Step 2: Select what you want, I am going to Select "Movie's" Press "OK"

Step 3: Select what you want, I am going to Select "---- A ----" Press "OK"

Step 4: Select what you want, I am going to Select "The A-Team (2010)" Press "OK"

Step 5: Select one of the Links Press "OK" if it doesn't work the first time try again or go to the next link


PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Using 1Channel
Step 1: Using your remote Press "Green" into BH Green Panel & Select "1Channel " Press "OK"

Step 2: Select what you want, I am going to Select "Movie's" Press "OK"

Step 3: Select what you want, I am going to Select "Search" Press "OK"

Step 4: Search for what you want, I am going to Select "scarface" Press "OK"

Step 5: Select the page "Page 1 -1" Press "OK"

Step 6: Select what you want, I am going to Select "scarface (1983)" Press "OK"

Step 7: Select one of the Links Press "OK" if it doesn't work the first time try again or go to the next link
End of Part 6 To return to index Click Here
PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Part 7 Installing a Hard Drive (optional)
What you need
1. Vu+ receiver
2. SATA data and power cable supplied with your receiver
3. SATA hard drive 3.5 or 2.5 depending on your receiver
4. Screws and rubber grommets supplied with your receiver
5. Phillips screwdriver
Please be careful and take your time
Step 1: Unplug the Vu+ for several minutes before you begin the installation
Step 2: Take out the 3 screws on the back & the 2 on each side with your screwdriver & slide the top cover
towards the back to remove

Step 3: Take out the screws and remove the hard drive bracket

Step 4: Insert the rubber grommets supplied into the grooves on the hard drive bracket now place your hard
drive with the lable faced down on your work surface and place your bracket on top lining up the holes make
sure your hard drive power and SATA connections are facing in to the centre of the receiver and insert the
screws and tighten them up

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 5: Place the hard drive bracket back in to the receiver line up the screw holes and insert the screws and
tighten them up

Step 6: Connect your SATA data & power cable supplied with your receiver to your hard drive

Step 7: Connect your SATA data & power cable to your main board has shown in the images below .
you can lay the cables where you like the images below is just an example


Step 8: Now replace the top cover on your receiver & insert all the screws & tighten them up
Step 9: Now go back to Part 1 to install the latest Black Hole image Click Here
Please note: if you have the latest Black Hole install you need to configure your hard drive Click Here
End of Part 7




PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Part 8 Configure your hard drive
Step 1: Main screen using your remote Press "Menu" into BH Main Menu & Select "Setup" Press "OK"

Step 2: Select "System" Press "OK"

Step 3: Select "Hard drive" Press "OK"

Step 4: Select "Initialisation" Press "OK"

Step 5: Select your hard drive "ATA(######)" Press "OK"

Step 6: Press "Red" button to Initialise

Step 7: BH Message Select "yes" Press "OK"

PDF Guide Brought to you by micky-d & open_source_empire more guides available Here
Give credit where credit is due, huge thanks to all the teams involved for making it possible
Step 8: Exit back to BH Menu HDD and Select "Filesystem Check" Press "OK"

Step 9: Select your hard drive "ATA(######)" Press "OK"

Step 10: Press "Red" button to Check

Step 11: BH Message Select "yes" Press "OK"

Step 12: Now go back to Part 2 Install Channel List Click Here or return to index Click Here
End of Part 8

You might also like