You are on page 1of 6

Fantastic Maps

Maps of real and fantasy worlds


Weekly Tips 2 How to design a gatehouse, using
grids and building isometric maps
Castle Defence a classic gatehouse
Castles are built for more than one reason people live there, guards are stationed there and often they
are political power centers for the region. But first and foremost they are built to keep people out. The
weak point in any castle is its front door, and a number of techniques were perfecte over the years to
make sure that someone trying to attack a castle would have a hard time of it. Now attackers might not
be as obvious as a massed army at the gates unsavoury people sneak in too. This gatehouse design was
used in many places including Linlithgow Palace, the palace I grew up beside and spent a lot of time in.
Weekly Tips 2 How to design a gatehouse, using grids and building i... http://www.fantasticmaps.com/2012/01/weekly-tips-2-how-to-design-a...
1 di 6 15/02/2013 9.45
Visitors approach from the south (in this diagram). The outer gate is large and heavy, and often
opens onto a moat thats crossed on a drawbridge.
1.
Once inside, the doors are closed behind (often from a mechanism operated from the guard room). 2.
Progress forwards is barred by a portcullis, and a set of heavy doors. This allows the inner doors to
be opened safely so someone can talk to the visitors, without allowing them access to the castle
3.
Guards on either side can target visitors through arrow slits. 4.
More guards are perched above and can target visitors with ranged weapons, or that classic de-
fence of boiling oil.
5.
This provides a robust defence mechanism against invaders, but its far from fullproof. Linlithgow Palace
was taken by a small group of determined soldiers using a simple ruse with a hay cart. The farmer drove
his cart with fresh grain up to the palace. The guards opened the portcullis to let him in. He stopped the
cart under the portcullis, and armed soldiers burst out from under the hay. The portcullis was dropped,
but the cart jammed it open, and provided an open front door for the extra troops waiting in hiding out-
side. Soldiers poured in and the Palace was taken with relative ease.
For a game with fantasy elements, youll want to station some form of caster at the front gate, with some
easy divination magic. The murder holes make the perfect vantage point for a sorcerer, and the confined
space is just built for flaming spheres.
This tip originally appeared here on G+.
Drawing Isometric Dungeons
There are some classic isometric dungeon maps out there, particularly those of Castle Ravenloft the
original David Sutherland maps inspired the styles of all maps of that castle that have come since. Its
also a style beloved of computer games, most notably the Diablo series.
Creating an isometric map is actually pretty easy.
How to draw an isometric dungeon map
First draw out your floor plan as if it were top down. Place lines for all the elements on the ground
walls, doors, outlines of pit traps. I draw these lines on a separate layer from the grid as it keeps ev-
1.
Weekly Tips 2 How to design a gatehouse, using grids and building i... http://www.fantasticmaps.com/2012/01/weekly-tips-2-how-to-design-a...
2 di 6 15/02/2013 9.45
erything organised.
Make it isometric! Rotate the map 45 degrees. Then you shrink the map vertically by 57.7%. 2.
The great thing about isometric maps are the vertical details you can throw in there. Find every cor-
ner, and draw a vertical line to show wall edges. Focus on the edges that dont obscure details fur-
ther away. Here Ive added the most detail where the detail doesnt overlap the actual floorplan. Fill
in the blank space with sketched stone texture, add in illustrated doors, throw in some lines to
show the rough stone in natural stone tunnels and give the viewer an idea of just how deep the
spiked pit trap is. Again, I add these details on a separate layer to make it easy to erase mistakes
without rubbing out the floor lines.
3.
Remember that the primary goal of the map is to show the floorplan and allow for easy use for a GM. The
extra detail that an isometric map provides can really sell the setting of a map, but its also easy to ob-
scure important features.
This tip originally appeared on Google+ here.
Quick and Easy Dungeons using Grids
This ones quite specific for photoshop, but can be adapted to Gimp (and Ive added some gimp tips
throughout).
Its a neat tool that often lies buried in Photoshops preferences panel that allows you to turn on a grid
that you can snap to. This is perfect for quick dungeon floorplans on the fly. Combined with layer effects
and blend modes (a future mini-tute) this can give you great looking maps really quickly.
There are a few steps to turning the grid on at the right scale.
Make sure that you have your image file set the correct scale. Here Im creating a map at 100
pixels per square, so I set the resolution to 100dpi.
1.
Open up Preferences and go to the settings for Guides, Grids and Slices. In here set the grid
to 1 inch, and add in the number of subdivisions you want. When sticking to drawing features
that take up full 5 squares you can set the subdivisions to 1. If you want to draw some
smaller detail, like a 1 thick wall, then set it to 5 to get a grid line every foot.
2.
This should now give you a grid on your map. You can show/hide it with ctrl/cmd + . You can 3.
1.
Weekly Tips 2 How to design a gatehouse, using grids and building i... http://www.fantasticmaps.com/2012/01/weekly-tips-2-how-to-design-a...
3 di 6 15/02/2013 9.45
City Design Walk-
through
How to draw cliffs
3 different styles
Drawing Realistic
Coastlines
How to turn a map
into an underwater
landscape
Converting a Phone
Photo to Digital
Line Art
Share this: 3 Like 0 Tweet 0
StumbleUpon
also toggle the snapto grid behavious using shift + ctrl/cmd + ; This also toggles snapping to
guides.
Note for Gimp Users theres a plugin here that allows you to create a grid of guides that will
do the same job.
4.
With the snap to grid on, you can create a new layer, and use the rectangular select tool and Fill (op-
tion + delete or cmd/ctrl + delete for foreground/background fill) to quickly lay in your dungeon lay-
out.
2.
Using that as a base, you can use blend modes and layer styles to build a pretty dungeon (or Gimp
users can use this plugin to generate a pretty dungeon map from their basic layout)
3.
This tip originally appeared on Google+ here.
Theres also a new Tutorials tab up on the menu bar, so youll be able to find all the tutorials up there from
now on in.
You might also like:
LinkWithin
This entry was posted in Battlemap, Tips and Tricks and tagged castle, dungeon, gatehouse, gimp, grid,
lunchtime tip, photoshop, tutorial on January 14, 2012 [http://www.fantasticmaps.com/2012/01/weekly-
tips-2-how-to-design-a-gatehouse-adding-grids-and-building-isometric-maps/] .
5 thoughts on Weekly Tips 2 How to design a gatehouse, using grids and building
isometric maps
Steve
January 15, 2012 at 2:46 am
Weekly Tips 2 How to design a gatehouse, using grids and building i... http://www.fantasticmaps.com/2012/01/weekly-tips-2-how-to-design-a...
4 di 6 15/02/2013 9.45
Jon, I have quite a few RSS feeds that I go through so I normally dont pause to comment on posts. How-
ever, I do want to say I really appreciate you sharing your work and now these tips on your mapmaking
process. I work for a design group in the Navy and have passed your links on to my co-workers. Thank
you very much for the inspiration and instruction.
Im really glad youve been enjoying them. Ill continue to post tips and I love that theyre making it into a
naval design group! I know what you mean about the stream of information on RSS feeds these days its
really good to know that these are coming in useful to people.
Jon
January 16, 2012 at 2:46 pm
Post author
Hey, have you tips on the layer styles to achieve the final look of that gridded dungeon? I played around
with this a bit but I come nowhere near to this. I have a black Outer Glow 50px wide to achieve this undi-
rected shadow effect, but even thats not as good looking as your sample.
Ill be putting up a post on the layer styles this week, but Ill give a quick breakdown here:
colour set to a mid blue-grey and blend mode to colour burn
2px black stroke inside the wall area
black drop shadow with mode set to colour burn, large blur (75px) and offset set to zero, opacity of 75%
Outer glow with colour set to black, mode set to overlay, opacity 75%, size 75px
Inner glow with colour set to white, blend mode set to overlay, opacity 40% andsize set to 50px.
Ill explain all the decisions in that later, and obviously the pixel sizes will depend on your scale but that
should get you started. Hope that helps!
Bastian Dornauf (@bdornauf)
January 15, 2012 at 8:46 am
Jon
January 16, 2012 at 2:51 pm
Post author
Weekly Tips 2 How to design a gatehouse, using grids and building i... http://www.fantasticmaps.com/2012/01/weekly-tips-2-how-to-design-a...
5 di 6 15/02/2013 9.45
Aweome, thanks for my breakdown and the full-length weekly tip. This really is a great project of yours!
Thx
Bastian Dornauf (@bdornauf)
January 17, 2012 at 10:57 pm
Weekly Tips 2 How to design a gatehouse, using grids and building i... http://www.fantasticmaps.com/2012/01/weekly-tips-2-how-to-design-a...
6 di 6 15/02/2013 9.45

You might also like