You are on page 1of 13

COMMANDS

lt all
readclock
alt
strt
cabx
bor
get synchronization=1
bp mod
lh mod drh_dcrh_topdata
lpr mspg
uer
uer -i <IMSI/TMSI>
lhsh 001200
pboot show parameters
lpr ipatmlink ,get (proxy), pr ip,get (Proxy)
get ipinterface
pr upgrade & cvls & lst upgr
Get 0 & get . Swallocation
pr ipaccesshost ,get (proxy) or get ipinterface=ms-04-lucs
st plug
bl <proxy id>
deb <proxy id>
ls
cd logfiles
download logs or read alarm logs,system events
Logs saved in the below path and can be extract through FTP
c:\logfiles/alarm_event/alarm_log.xml
cvls
cvmk <Name of CV>
cvcu
cvms <cv name>
strt
strtf | grep <nodeB>
bs g c "pboot show parameters"
lhsh 000700 ueregprint all
Moshell Commands
To Block/Deblock any Board
Alarm Logs, System Event and Hardware inventory
ENODEB Backup
Some more commands
spashwinfo all
mirror stat
cv cu
cv ls
bs g c "te log read"
bs g -c "sma all"
bs g c "llog l"
bs g c vii
lhsh <ModuleMP> ue_poolinfo
lhsh <ModuleMP> drh_dcrh_topdata all
lhsh <ModuleMP> drh_ccrh_topdata all
lhsh <ModuleMP> drh_pdrrh all
bs -g -c "drh_pdrrh all"
> lhsh <board> drhcendh
> lhsh <board> drhcendh cc
> lhsh <board> drhcendh dc
> lhsh <board> drhcendh pdr
Note: <board> in the printout refers to the active RANAP board.
> str
> ced
> st all dis
> lkra
emom
ue print -ue -allcell
getstat
lhsh 001700 arealist cell all
> lhsh <board> rof_config
> lhsh <board> rof_assoc_info
> lhsh <Active Core MP board> sccadm_info
> lhsh <board> sctphost_info config
> lhsh <board> sctphost_stat ovl
Note:<board> in the printout refers to the active SCCP/SCTP
board.
Set of Printouts from Central MPs
Set of Printouts from All Boards
or
Run the following DRH command on the RANAP MP:
Collect Status of Cells or Channels
for RANAP over SIGTRAN issues collect the output from the following commands:
RNSAP issues
> lhsh <board> rnsap dumpRoTable
> lhsh <board> rnsap status
> lhsh <board> rnsap conn
> lhsh <board> rnsap dumpRoTable survey
te status | grep UE_
lgn -m 3
lgn -m 3 -n
lgd -m 30
lga m 1
lgae -m 3h
lgo -m 5m
lgs -m 5 p 3
lgs s 20080220.0700 e 20080221.1400
alt | grep i xxxx
lga | grep -i xxxx
pmr
pmr -m 5
pmr -s 20101220.1900 -e 20101220.2000
lget <Site Name> primarys
get <utrancell= >
lget all pointc
lk rnsap
st rnsap
lk ranap
st ranap
get <ucell> primaryscramblingcode|uarfcndl
get iublink=<iublink>
lst iublink=<iublink>
lk <iublink>
st utrancell=<utrancell>
lst utrancell=<utrancell>
get . primaryscramblingcode
get 0
get . noofradiolinks
lkr
cab Print in different way
cab
lst InternalLinkGroup
lk InternalLinkGroup
get InternalLinkGroup
invh
> pr du
st du
lst auxpluginunit=rru-1
hget riport remote
hget rfport=[ab] reservedby
hget rfbranch= auport
hget riport ref
hget rfbranch= auport
momt antennaunitgroup
lpr antenna
get rfbranch=a ref|reservedby
get rfbranch=b ref|reservedby
get antennasu ref
hget nearun type|ref
mom ant type
hget ecport hub
lst hwunit
hget alarmport= !userlabel|stat|alarmportid|cause
momd rbsconfiguration
lgq | grep -i rbsconfiguration
get rbsconfi report
cat /c/logfiles/autointegration/configuration.log
license lkf
license server
get licensing
lget optional featurestate
leset optional featurestate 1
get constant
cab
st termpoint
st termpointtomme
st termpointtoenb
hget termpoint ipadd
hgetm termpoint usedip|state
st nearunit
acl 223
acc 223 restartUnit
DETAIL OF COMMAND
To Load the MO's.Necessary to execute before executing any command.
To get the time and date
To get the alarms in RNC with Time and date
T Get the type of board,software allocation and magzine number
To get the nodeSystemClock and it should be in lock mode
To Verify that both RANAP to MSC and SGSN are enabled.
To Verify that all Iub Links are enabled.
To ge the RNC Module detail
To get the GPB & SPB Pool
To get Transport network redundancy
To Get the call detail
To get the call detail for perticular IMSI/TMSI Number
To get the detail of the hardware
IP all to be check or ping
Get IP Interface (Default Interface IP for all)
Get The SWR Versions
Get The SWR Versions
Get IP for CS
To get the proxy of all boards
To Block the board
To Deblock the board
To get the list of directories
To get into the logfiles folder
To get the list of CV
To make the CV with desired name
To get the detail of startable and rolback CV
To make CV startable
The f option ("fast") is for printing without fetching the data of particular nodeB
(Hardware info from all boards)
(List of active Ue's in node)
Moshell Commands
To get the status of Site and detail of site like GPB Module number,Link Status,status of Cell,ETM Port.
To get the hardware detail of RNC Board with status of the board,Product and serial number,slot number,magzine
number
To login to the board,example 111200 means 00 for MS,12 means for board number 12 and last 00 for pluginunit
which is always 0
To Block/Deblock any Board
Alarm Logs, System Event and Hardware inventory
ENODEB Backup
Some more commands
(Snapshot of spas HW information)
(FTC status)
(Lists current configuration version)
(Lists all configuration versions on the node)
(Trace and error log)
(RPU status)
(Restart log on each board)
(Board optical indicator status)
(Ueh procedure pool information)
(DcDevice usage)
(CcDevice usage
(PacketDataRouter information)
(Cell availability information)
(Print celldata)
(List all disabled MOs in RNC)
(Print RNC Iub resources allocation)
Lists all available events
To check traffic in connected UE.
counter information
(Configuration information)
(Associations)
(Associations)
Set of Printouts from Central MPs
Set of Printouts from All Boards
or
Run the following DRH command on the RANAP MP:
Collect Status of Cells or Channels
for RANAP over SIGTRAN issues collect the output from the following commands:
RNSAP issues
(RNSAP configuration information)
(Check RNSAP status)
(Check RNSAP connections)
(Print the survey of RoTable for RNSAP)
To filter trace
Shows all moshell commands executed on a particular node by all users(last 3 days)
Shows all moshell commands executed on any node by all users
Node downtime and partial outages
logs of 'last day
---> last 3 hrs
---> last 5 minutes
---> starting from 5 days ago and 3 days forward
--> between these two timestamps
<< to check current alarms related to our site
<< to check alarms history on of the site
: will show statistics
: will show statistics last 5 hrs
: To find sector scrambling codes for site.
Complete data of cell
Get signallingPointCode and destPointCode
get all Iur data
get all Iu data
Status of all linked MOs of a iub
status of RBS
status of RBS
get the scrambling code of all RBS
To get RNC/RBS type
run it in RBS and get no of calls in all sector
display the repartition of IubLinks and UtranCells across rncModules and Subracks
- h: prints MP/BP HW info and led status, MP temperature, and coreMgr status. If no options are given then this is the default option.
- t: same as above but without the temperature
cab Print in different way
- x: same as cab/cabh plus led and hw info for the XP boards (eg: TMA, MCPA, Fans, etc.)
- s: same as cab/cabh plus list of programs running in all MP/BP
- l: MP/BP/SP processor load
- r: prints all MP/BP restarts grouped by board. To see this info in chronological order, use the command "lgg".
- a: prints only abnormal MP/BP restarts.
- d: print disk usage. Disks that are getting over a certain limit will appear in color.
- f: print disk and flash usage.
- g: print MP/BP HW errors (e.g. faulty disk, faulty RAM, etc).
- m: print MP/BP RAM memory usage.
- e: print MP/BP added T&E trace conditions. Superceded by "fte s" command. Type "h fte" for info.
Check inventory
check du
remote ru
Antenna
Support system
Check alarm
Moshell printout
print mo commands after autointeg
License
check feature stats
activate all at a time
System constant
To check ISL
Checking state ip address of all S1/X2 termpoints:
Checking state ip address of all S1/X2 termpoints:
- h: prints MP/BP HW info and led status, MP temperature, and coreMgr status. If no options are given then this is the default option.

You might also like