You are on page 1of 2

Technical Data Sheet

Therma-TechTT6600-5001 EC Grey
Polyamide 66

Key Characteristics
Product Description
Therma-Tech Thermal Management Compounds have been engineered to combine the heat transfer and cooling capabilities
of metals with the design freedom, weight reduction and cost advantages of thermoplastics. These materials provide the
benefits of proprietary conductive additive technologies and the performance of select engineering thermoplastic resins.
Therma-Tech compounds have been shown to improve thermal conductivity up to 100-times that of conventional plastics and
can be used in a wide range of thermal management applications.
General
Material Status
Commercial: Active
Regional Availability
Features
Uses
Forms
Processing Method

Africa & Middle East


Asia Pacific
Electrically Conductive

Automotive
Applications

Automotive Under the Hood

Europe
Latin America

North America

Thermally Conductive
Consumer Applications
Electrical/Electronic
Applications

Housings
Industrial Applications

Pellets
Injection Molding

Technical Properties1
Physical
Specific Gravity
Molding Shrinkage - Flow
Mechanical
Tensile Modulus2 (73F (23C))
Tensile Strength3 (Break, 73F (23C))
3

Tensile Elongation (Break, 73F (23C))

Typical Value (English)


1.64
0.0020 to 0.0040 in/in
Typical Value (English)
2.15E+6 psi
9430 psi
0.50 to 1.0 %

Flexural Modulus4 (73F (23C))

1.89E+6 psi

Flexural Strength4 (73F (23C))


Impact
Charpy Notched Impact Strength
Charpy Unnotched Impact Strength
Thermal
Heat Deflection Temperature
66 psi (0.45 MPa), Unannealed
Heat Deflection Temperature
264 psi (1.8 MPa), Unannealed
Thermal Conductivity

13100 psi
Typical Value (English)
1.4 ftlb/in
3.3 ftlb/in
Typical Value (English)

73F (23C)5
--6
--7
Electrical
Surface Resistivity
Flammability
Flame Rating (0.0630 in (1.60 mm))

Typical Value (SI)


1.64 g/cm
0.20 to 0.40 %
Typical Value (SI)
14800 MPa
65.0 MPa
0.50 to 1.0 %
13000 MPa
90.0 MPa
Typical Value (SI)
3.0 kJ/m
7.0 kJ/m
Typical Value (SI)

500 F

260 C

473 F

245 C

Test Method
ISO 1183
ISO 294-4
Test Method
ISO 527
ISO 527
ISO 527
ISO 178
ISO 178
Test Method
ISO 179/1eA
ISO 179/1eU
Test Method
ISO 75-2/B
ISO 75-2/A

17 to 21 Btuin/hr/ft/F

2.5 to 3.0 W/m/K

31 to 38 Btuin/hr/ft/F

4.5 to 5.5 W/m/K

ASTM E1461

130 to 150 Btuin/hr/ft/F


Typical Value (English)
< 1.0E+5 ohm
Typical Value (English)
HB

19 to 21 W/m/K
Typical Value (SI)
< 1.0E+5 ohm
Typical Value (SI)
HB

ASTM E1461
Test Method
IEC 60093
Test Method
UL 94

Copyright , 2014 PolyOne Corporation. PolyOne makes no representations, guarantees, or warranties of any kind with respect to the Information contained in this document about its
accuracy, suitability for particular applications, or the results obtained or obtainable using the information. Some of the Information arises from laboratory work with small-scale equipment which
may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment. Values reported as typical or stated without a range do not state minimum
or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause material properties to shift from the values stated in
the Information. PolyOne makes no warranties or guarantees respecting suitability of either PolyOnes products or the Information for your process or end-use application. You have the
responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the Information
and/or use or handling of any product. POLYONE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the Information or products reflected by the Information. This data sheet shall NOT operate as
permission, recommendation, or inducement to practice any patented invention without permission of the patent owner.

Rev: 2013-12-12

Page: 1 of 2

Therma-TechTT6600-5001 EC Grey
Flammability
Glow Wire Flammability Index
0.0315 in (0.800 mm)
0.0630 in (1.60 mm)
0.118 in (3.00 mm)

Technical Data Sheet

Typical Value (English)

Typical Value (SI)

1760 F
1760 F
1760 F

Test Method
IEC 60695-2-12

960 C
960 C
960 C

Processing Information
Injection
Drying Temperature
Drying Time
Suggested Max Moisture
Processing (Melt) Temp
Mold Temperature

Typical Value (English)


176 F
4.0 hr
0.20 %
527 to 572 F
176 to 221 F

Typical Value (SI)


80.0 C
4.0 hr
0.20 %
275 to 300 C
80.0 to 105 C

Notes
1

Typical values are not to be construed as specifications.

Type I, 0.039 in/min (1.0 mm/min)

Type I, 2.0 in/min (50 mm/min)

0.39 in/min (10 mm/min)

Through Plane with Modified Transient Plane Source, C-Therm TCi

Through Plane

In Plane

CONTACT INFORMATION
Americas

Asia

Europe

Mexico - Toluca
+52 722 2790200

China - Shanghai
+86 21 5080 1188

Germany - Gaggenau
+49 7225 6802 0

United States - Avon Lake


+1 440 930 1000

China - Shenzhen
+86 755 2969 2888

Spain - Barbastro (Huesca)


+34 974 310 314

China - Suzhou
+86 512 6823 24 38

Turkey - Esenyurt - Istanbul


Trkiye
+90 212 549 2256

China - Tianjin
+86 22 2532 8818
India - Pune
Japan - Tokyo
+81-3-6261-3980
Singapore - Singapore
+65 6861 9325

Beyond Polymers.

Taiwan - Yonghe City,


+886 9396 99740, +886 2929 1849

Better Business Solutions.

SM

www.polyone.com
PolyOne Americas

PolyOne Asia

PolyOne Europe

33587 Walker Road

No. 88 Guoshoujing Road

6 Gillewee

Avon Lake, Ohio 44012

Z.J Hi-tech Park, Pudong

+352 269 050 35

United States

Shanghai, 201203, China

+1 440 930 1000

+86 21 5080 1188

+1 866 POLYONE

Copyright , 2014 PolyOne Corporation. PolyOne makes no representations, guarantees, or warranties of any kind with respect to the Information contained in this document about its
accuracy, suitability for particular applications, or the results obtained or obtainable using the information. Some of the Information arises from laboratory work with small-scale equipment which
may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment. Values reported as typical or stated without a range do not state minimum
or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause material properties to shift from the values stated in
the Information. PolyOne makes no warranties or guarantees respecting suitability of either PolyOnes products or the Information for your process or end-use application. You have the
responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the Information
and/or use or handling of any product. POLYONE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the Information or products reflected by the Information. This data sheet shall NOT operate as
permission, recommendation, or inducement to practice any patented invention without permission of the patent owner.

Rev: 2013-12-12

Page: 2 of 2

You might also like