You are on page 1of 3

YEOMAN ELECTRICAL & ELECTRONICS

2nd Jan., 2014

YEE//OF-032/SCRA/2013-14
To

Shree Cement Limited


Beawar/Rajasthan
Kind Attention- Mr. Vaibhav Gupta
Sub:-Offer against your enquiry
Dear Sir,
Kindly refer your inquiry for the items described below. We are submitting here with the offer. The
equipment shall be in two parts.

PRIMARY CURRENT INJECTION KIT (4V, 3500A)

(Offer Qty: 01)

Offer Price: Rs.289700/-(Two Lack Eighty Nine thousand seven hundred only) each
at ex-works Delhi Excluding all taxes.
The primary injection shall have the following technical specifications:
1. INPUT VOLTAGE
THREE PHASE 50Hz AC Input
2. OUTPUT VOLTAGE
0-4Vmax Open Circuit Voltage (3-Phase)
3. OUTPUT CURRENT
0-3500Amp
4. TIMER:
999 sec. mechanical type
5. CAPACITY:
Which suits best for output conditions.
6. DUTY CYCLE:
Continuous on with off for cooling
7. COOLING:

1|P a ge

Transformer air cooled option will be optimized after testing and shall be finalized
before delivery. However if transformer oil is needed will not be supplied by us.
8. VARIAC : The unit essentially will be Oil Cooled and manual.
9. METERING:
Multi range Ampere meter of class 0.5 with multirange CT of class 0.5 shall be
integrated for efficient measurement and it will be fitted on secondary side to indicate
output current. Calibration certificates of meters (Rishabh) will be internal not any
approved lab.

10. TERMINATION:
The output is brought out on suitable Bus Bars/Terminals which are rectangular
copper conductor marked for required ratings.
11. PROTECTION:
ON/OFF switch with fuse is provided to protect the unit against short circuit
generated high input current, push button to operate panel and output overload
protection through overload realy.
12. STANDARD ACCESSORIES:
Output cable will not be supplied but terminal for connection will be provided &
Operating manual (bearing scheme of connection, operational functionality of
different parts will be described for proper operation of instrument) shall be supplied
with the material
13. CIRCUIT DIAGRAM

2|P a ge

Terms and Conditions


1) Prices
Prices are for delhi.
2) Payment
45% Advance and 55% against proforma Invoice after testing
3) Packing & Forwarding
Extra
4) Insurance & Freight
Extra
5) CST/VAT
Excluded
6) Delivery
3-4 weeks after the receipt of your firm order with advance.
7) Validity
Our offer is valid for a period of 60 days.
8) Inspection
Inspection will be done at our works by your authorized representative before
dispatch.
9) Accessories
Input, Interconnecting power cables are in the scope of supply.
Output cable of 1 Meter long only is in the scope of supply.
Oil if used shall not be supplied.
10) Commissioning
Once it will be free. If required in future will be charged extra at actual payable in
advance.
11) Guarantee: The equipment is warranted against manufacturing defects for a period of
12 months. But normal wear and tear, breakage, burning, fusing, damages due over
voltage input, improper handling and damages due to transport is not covered under
warranty..

Thanking you,
Yours Faithfully

For Yeoman Electrical and Electronics


(Shweta Verma)
AUTHORISED SIGNATORY
WZ-18 Tatarpur New Delhi-110027
TIN No-07670436070

3|P a ge

You might also like