Professional Documents
Culture Documents
Model : SM-100
1st Version
Edition
Month
Year
1st
December
2004
TEL:+86-021-57234888
FAX:+86-021-57234090
X1.1
X2.1
X3.1
X4.1
X5.1
X6.1
X7.1
X8.1
X3.2
X4.2
X5.2
X8.2
X1.4
X2.4
X3.4
X4.4
X5.4
X6.4
X9.4
X4.3
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S1 PLU File
S1.0
S1.1
S1.2
S1.3
S1.4
S1.5
S1.6
S1.7
S1.8
S1.9
S1.10
S1.11
S1.12
S1.13
S1.14
S1.15
S1.16
S1.17
S1.18
S1.19
S1.20
S1.21
S1.22
S1.23
S1.24
S1.25
S1.26
S1.27
S1.28
S1.29
S1.30
S1.31
S1.32
S1.33
S1.34
S1.35
S1.36
S1.37
S1.38
S1.39
S1.40
S1.41
S1.42
S1.43
S1.44
S1.45
S1.46
S1.47
S1.48
Note: Details please refer to the tables from Page 47 to Page 50.
S12.0
S12.1
S12.2
S12.3
S12.4
S12.5
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
Table of Content
2. SETUP .............................................................................................................................. 9
2.1 Mode Change ................................................................................................................................................. 9
2.2 Specification Setting ..............................................................................................................................10
2.2.1 Specification Entry(141) ............................................................................................................... 10
2.2.2 Specification List................................................................................................................................. 11
1. GENERAL INFORMATION
1.1 Overall View
Bench Type
Pole Type
Elevated Type
Elevated Type
1.4 Features
Digital printing scale consists of electronic cash registers function and label printing function.
Capacity
Resolution
: 3kg, 6kg, 12kg, 15kg, 30kg, 6lb, 12lb, 15lb and 30lb.
: Display Resolution 1/3,000.
: Internal Resolution 1/90,000.
Calibrating by software.
25 digits x 19 segments TN type LCD with red back-light for numeric digit and character display.
Various reports.
Ethernet function.
Compact housing.
1.5 Specifications
1.5.1 Display
25 digits x 19 segments TN type LCD with red back-light for numeric digit and character display.
Tare Weight display
: 4 digits.
Weight display
: 5 digits.
: 6 digits.
: 7 digits.
Operating Temperature
: -10 C ~ +40 C.
Operating Humidity
Power Consumption
: 0.15A.
1.5.3 Dimensions
Platter size
Overall size
a)
Bench
b) Pole
c)
Elevated
P1 ~ P74
NUMERIC KEYS
0~9
TARE KEY
Set or Clear Tare value.
Select "NO" in S and Z Mode.
Item test print in S Mode.
CLEAR KEY
RE-ZERO KEY
Reset weight to ZERO.
PREPACK KEY
AUTO
CHANGE KEY
Calculate the Changed Amount.
Escape the Programming screen without saving data in S Mode.
CLERK KEY
V1~V4
VOID KEY
PLU KEY
PLU
FEED KEY
Feed Label or Receipt paper
PRINT KEY
Print out Label or Receipt.
<<,>>
Select parameter data such as SPEC data. Move cursor left or right.
1.7 Indicators
NET
: On when pre-pack mode is chosen; indicate capital letter is use in PLU programming.
V1 ~ V4: On when vendor transaction entries (department entry or PLU entry) are performed.
2. SETUP
2.1 Mode Change
OPERATION
DISPLAY
PT
kg
/kg
0.000
0.000
0.00
0.00
[MODE],[MODE]
XMODE
(within 3 seconds)
REMARK
Weight mode.Lamp R turns on.
Enter X mode.Lamp X turns on.
[MODE]
S1
PLU
FILE
[MODE]
Z1.0
RESET
SALES
DAILY
PWD X
SET
0.000
0.00
0.00
[MODE]
[MODE]
0.000
DISPLAY
PT
kg
/kg
Z1.0
RESET
SALES
DAILY
XXX
XXX
(setting)
(former)
[Rezero]+[1][4][1]
SPEC 000
[]
SPEC 001
XXX
XXX
[]
SPEC 000
XXX
XXX
[1][7]
SPEC 000
017
XXX
[X]
SPEC 017
XXX
XXX
[>>]
SPEC 017
XXX
XXX
[<<]
SPEC 017
XXX
XXX
[1]
SPEC 017
001
XXX
[*]
SPEC 018
XXX
XXX
[C]
SPEC 018
000
XXX
RESET
SALES
DAILY
[PLU]
* Note 1
Z1.0
10
REMARK
Z mode.
Lamp Z turns on.
Enter
[1][4][1]
while
depressing
[Rezero].
XXX:SPEC data
[ ]key only increase specification
count, it does not update SPEC data.
[ ]key only decrease specification
count, it does not update SPEC data.
It goes to a designed specification
count.
(000~441 is enabled)
[>>] key select SPEC data.
Move cursor right.
[<<] key select SPEC data.
Move cursor left.
01
02
SPECIFICATION DESCRIPTION
Item Barcode
0
F1F2 CCCCC XCD XXXX CD
1
F2 CCCCCC XCD XXXX CD
2
F1F2 CCCCC 0 XXXX CD
3
F1F2 CCCCCC XXXX CD
4
F1F2 CCCCC XXXXX CD
5
F2 CCCCCC XXXXX CD
6
F2 CCCCC XXXXXX CD
7
F1F2 CCCCCCCCCC CD #1
8
F1F2 CCCC XXXXXX CD
9
F1F2 CCCCC CD #2
10 F2 CC XXXX CD #3
11 No Barcode
12 F1X2 CCCCC XCD XXXX CD
13
14
15
16
17
18
19
20
4
5
6
7
Original Price
Weight / Quantity
Unit Price
Unit Price after discount
SM-100
# Related to
SPEC153.
Effective when
SPEC1 = 1
03
04
05
06
07
Total Barcode
0
F1F2 CCCCC XCD XXXX CD
1
F2 CCCCCC XCD XXXX CD
2
F1F2 CCCCC 0 XXXX CD
3
F1F2 CCCCCC XXXX CD
4
F1F2 CCCCC XXXXX CD
5
F2 CCCCCC XXXXX CD
6
F2 CCCCC XXXXXX CD
7
F1F2 CCCCCCCCCC CD #1
8
F1F2 CCCC XXXXXX CD
9
F1F2 CCCC CD #2
11 No Barcode
12
13
14
15
16
17
18
19
20
11
3
4
Clerk No.
Fixed No.
09
10
11
Weight
Yes
12
13
Print Readable Character of F1 for Item and Total Barcode (for EAN only)
0
No Print
1
Print
14
Above
Not Used
Yes
15
16
17
18
19
20
21
22
YY/MM/DD
Not Used
No Print
Name
50 mm
12
24
Formats in ( ) are
for U1 and CA only.
25
26
27
28
29
30
31
12
13
14
15
16
17
18
19
20
21
S
A
B
C
F1
F2
F3
F4
F5
F6
(T7)
(T8)
(T9)
(T10)
(F1)
(F2)
(F3)
(F4)
(F5)
(F6)
22
F7
(F7)
23
F8
(F8)
12
13
14
15
16
17
18
19
20
21
S
A
B
C
F1
F2
F3
F4
F5
F6
(T7)
(T8)
(T9)
(T10)
(F1)
(F2)
(F3)
(F4)
(F5)
(F6)
22
F7
(F7)
23
F8
(F8)
Enable
Enable
F1 to F8 are Free
Format.
Formats in ( ) are
for U1 and CA only.
F1 to F8 are Free
Format.
Allow
Selection of CDV
0
Inhibit
Allow
For SF only.
CDV Type
0
CDV
Tear-off
For SF only.
13
33
34
35
36
37
38
39
CDV Modulus
0
Modulus 10
Modulus 11
On Spot Correction
0
Allow
Inhibit
Search Correction
0
Allow
Inhibit
Inhibit
Inhibit
2
3
High-mid
High
2
3
High-mid
High
Time-out
Calling of PLU
0
Manual
1
Auto
40
41
Unit Price of Weigh PLU Can Use for Price of Non-weigh PLU and Vice Versa
0
Allow
1
Inhibit
42
For SF only.
Effective when
SPEC30 and 31 = 1.
Related to SPEC40.
Effective when
SPEC39 = 1.
Effective when
SPEC643 = 0.
Inhibit
43
Main Usage for Commodity Name, Shop Name and Special Message
0
Receipt
1
Label
44
Tare Override
0
Allow
Inhibit
Item Printing
0
Allow
Inhibit
45
46
47
14
49
3
4
Not Used
4-Lines (RS-485)
Backup Server
4
5
6
19 200 bps
38 400 bps
76 800 bps
8 Bits
Even
2 Bits
50
51
52
53
54
55
56
57
58
59
15
61
62
63
64
3
4
5
Point N Shop
Barcode Scanning
Video Control #2
Floating Clerk
0
Inhibit
Allow
Enable
Exclude AA.
Yes
65
66
Inhibit
Inhibit
67
68
69
70
Inhibit
71
72
Inhibit
Inhibit
Inhibit
Inhibit
73
74
75
16
84
85
Inhibit
Inhibit
Inhibit
Inhibit
Inhibit
Inhibit
Allow
Selection of Markdown
0
No Markdown
1
Unit Price Markdown
2
3
Inhibit
Inhibit
86
87
Label Type
0
Gap
88
89
90
91
No Gap
Allow
For AA only.
Allow
For AA only.
Sub-total Markdown
0
No Markdown
Markdown
High
17
93
94
95
96
97
High
Not Used
3
4
3 sec Delay
User Select
After Price
Allow
Allow
Allow
98
Quantity and Unit Price Print Out for Non-weigh Item in Manual Mode
0
Allow
1
Inhibit
99
100
Inhibit
Enable
101
102
103
104
Disable
Cut Up
105
106
107
18
109
Packed Date
Year Type
0
Standard
Japanese / Taiwan
Yen
For AA only.
110
111
112
113
3
4
Logo 3
Logo 4
4
5
6
Logo 3
Logo 4
Logo 1, 2, 3 and 4
114
115
116
117
No Print
For AA only.
Zero Suppress
Thin Character
Prepack Mode
Disable
118
119
120
121
122
123
For AA only.
19
127
Top
Partial Protection
Enable
128
129
130
131
132
For IR only.
POS ECR
For IR only.
Use with SPEC128.
Yes
Yes
For DM only.
133
134
Host Communication
0
No Operation
Host Communication
0
RS-232C
Enable
RS-485
135
Port Number
Enter value from range 1 to 254
136
Two Touches
No
137
138
139
3 Digits
AA Message Size
0
24 x 24
16 x 16
140
20
For AA only.
Year Format
0
YY
YYYY
Enable
Low
Disable
Enable
Allow
Exclude AA.
Allow
Exclude AA.
FIS3000 Code
0
SM-80/90 FIS3D
SM-25 FIS3D
Allow
Central Assign
Exclude AA.
151
152
153
154
Capital Letter
For SD only.
Enable
Training Mode
0
Disable
Enable
Exclude DEC.
For U1 only.
155
156
157
158
159
Enable
Enable
21
Unshielded
Not in used.
Disable
For SD only.
Disable
Enable
240 mm
No
Enable
Exclude AA.
GB Code
0
GB Code
Shift GB Code
Yes
170
171
Euro Mode
0
Disable
Enable
Dual Declarations
0
No
Yes
172
173
Yes
For U1 only.
174
175
30 lb to 15 kg Conversion
0
Disable
Enable
For UK only.
Yes
176
177
Yes
22
Yes
Enable
Continuos Label
0
Disable
Enable
Small
Yes
185
Weigh PLU Can Use for Non-weigh PLU and Vice Versa Function Key Enable
0
Disable
1
Enable
186
Server
187
188
189
2
3
30 Days
90 Days
Yes
Yes
Nutrition Template
0
Standard
1
Simplified
2
Simplified Condensed
Standard Condensed
Tabulated
Tabulated Extra Condensed
190
191
192
Effective when
SPEC158 = 1.
3
4
5
193
194
Server IP Address
Enter a value between 1 to 254
23
198
199
200
201
Yes
Scale File
0
Disable
Enable
3 Alphabetic
Cent Off
32 sec
Enable
For U1 only.
202
203
204
205
206
Allow
Allow
207
208
2
3
x4
x10
FSD Calculation
0
Unit Price
Allow
New
209
210
211
24
Effective when
SPEC607 = 2.
For U1 only.
For SF only.
213
Allow
DHCP Function
0
Disable
Enable
No
214
215
216
217
For SF only.
Old
5
6
7
8
F5
F6
F7
F8
218
219
Disable
For AA only.
For AA only.
220
Effective when
SPEC1 = 0 or 2.
221
222
223
Enable
2 wires
No
Yes
Allow
224
225
226
227
25
Effective when
SPEC178 = 1.
230
Yes
Enable
Yes
Effective when
SPEC150 = 1.
231
232
Yes
Time Format
0
24 Hours
12 Hours (AM/PM)
233
234
235
236
New
For KE only.
Half-key Function
0
Inhibit
Allow
SM-25 Dots
237
238
239
240
241
242
243
244
245
Allow
Allow
7 Digits
Allow
Yes
Yes
Print Sell by Date or Used by Date when Date Equals Packed Date
0
Yes
1
No
26
248
249
250
251
252
253
254
255
256
257
258
259
260
261
Yes
2
3
Prepack Mode
No Print
2
3
Prepack Mode
No Print
2
3
Prepack Mode
No Print
Yes
Bottom
2
3
Every 3 min
Every 15 min
3
4
Enable
5 times
No
For AA only.
Yes
For AA only.
Beef Labeling
0
No
Yes
Yes
Name
External Rewinder
0
Disable
Enable
27
263
264
265
266
267
268
269
270
271
272
273
274
275
276
Receipt
On
Enable
Yes
FSD Weight
0
Back Computed (Single Range)
1
Back Computed (Dual Range)
CPDL Language Selection
0
First Language
Exact Weight
Second Language
4
5
6
7
V4
V5
V6
V7
For U1 only.
For U1 only.
For IR only.
Auto Clear
All Report
Date
No
Old
Enable
Floating Server
0
Disable
Enable
Effective when
SPEC270 = 1 or 2.
For IR only.
28
For TW only.
Apply for POS1
FLEX PP2000 srs.
2 only.
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
4
5
6
7
5 Days
6 Days
7 Days
Unlimited
3
4
U1 Self-service
0
Disable
Enable
Yes
Total Only
Barcode Function
0
Without CR
With CR
All Items
Inhibit
Yes
Yes
Yes
Disable
Yes
Payment Key
0
Disable
Enable
No Change
For U1 only.
For AR only.
Power Off
29
294
295
296
297
298
299
300
301
2
3
10 Min
2 Min
4
5
6
1 Min
2 Min
5 Min
No
12 Lines
Yes
Yes
Keyboard Selection
0
Normal Keyboard #
1
100 Preset Keys
80 Preset Keys
SM-500 Self-Service
0
No
Yes
No
Enable
303
305
Enable
Items
Code Page
0
DOS
ANSI
307
# 32/56 Preset
Keys.
Identical to SPEC672.
96 Preset Keyboard.
Identical to SPEC688.
304
306
For SF only.
302
For U1 only.
30
For IR only.
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
Enable
Praxis Function
0
Disable
Enable
RSS14 Barcode
0
Disable
Enable
For AI 01 only.
Enable
Enable
For KE only.
Enable
For KE only.
No
Training Mode
0
Disable
1
Enable
Print PLU Traceability in Receipt
0
Yes
No
Wireless Communication
0
No
Yes
Not in used.
No
Enable
Yes
Yes
Enable
Enable
No Change
For U1 only.
31
ON/Off Key
0
Disable
Enable
Enable
Enable
Inhibit
Yes
Enable
Enable
333
334
335
Enable
Enable
5
6
7
8
F5
F6
F7
F8
EAN128
336
337
338
339
340
Enforce Scan
0
No
Yes
TVP2000 (SM300)
0
Not Send T10
Enable
341
342
For Tu only.
32
400
401
Disable
No
3
4
5
30 Minutes
1 Hour
3 Hours
Off
402
403
Inhibit
6 Vender Keys
7 Vender Keys
404
2
3
405
406
Inhibit
Inhibit
407
408
409
Allow
Item
Inhibit
No Print
Packed Date
410
411
412
413
33
415
416
417
418
419
420
421
Inhibit
Barcode Scanner
0
Allow
Inhibit
Inhibit
Inhibit
Inhibit
Inhibit
Constitution of Report
0
Receipt Data
1
Label Data
422
423
Inhibit
424
For FR only.
425
Inhibit
For FR only.
Inhibit
426
427
428
Inhibit
Effective when
SPEC603 = 1
429
34
431
432
Inhibit
433
434
435
User Programmable
ITF Type
436
437
Inhibit
Inhibit
3
4
5
200ms
300ms
400ms
438
439
440
35
DISPLAY
PT
kg
/kg
Z1.0
RESET
SALES
DAILY
REMARK
Z mode.
Lamp Z turns on.
Display password for X mode .
[MODE]
PWD X
XXXX
SET
[1][2][3][4]
PWD X
1234
SET
[*]
PWD S
XXXX
SET
mode.
Lamp S flicker.
[*]
PWD Z
XXXX
SET
[3][3]
PWD Z
33
SET
[C]
PWD Z
SET
[*]
PWD P
XXXX
SET
[1][1][1][1]
PWD P
1111
SET
1111.
Lamp R X S Z flicker.
[*]
0.000
0.000
0.00
36
0.00
DISPLAY
REMARK
PT
kg
/kg
0.000
0.000
0.00
0.00
ENTER
PWD X
[1][2][3][4]
ENTER
PWD X
[*]
ENTER
PWD X
[1][1][1][1]
ENTER
PWD X
****
X1.0
READ
SALES
DAILY
S1
PLU
FILE
[MODE]
ENTER
PWD Z
[3][3]
ENTER
PWD Z
**
RESET
SALES
DAILY
[MODE]
ENTER
PWD P
[1][2][3][4]
ENTER
PWD P
****
Correct password.
[*]
PWD X
1111
SET
0.000
0.00
0.00
[MODE],[MODE]
(within 3 seconds)
[*]
[MODE]
[*]
[MODE]
Z1.0
0.000
37
Weight mode.
Lamp R turns on.
Need X mode password.
Lamp X turns on.
****
Incorrect password.
Retry.
Correct password.
Enters X mode.
Enters S mode.
Lamp S turns on.
Need Z mode password.
Lamp Z turns on.
Correct password.
Enters Z mode.
Need PWD mode password.
OPERATION
DISPLAY
REMARK
PT
kg
/kg
Z1.0
RESET
SALES
DAILY
[Rezero]+[2][3][0]
CLEAR
PLU
FILE
[]
CLEAR
VENDER
DATA
[]
CLEAR
REPORT
FILES
Report files.
[]
CLEAR
MEMORY
DATA
[*]
CLEAR
MEMORY
Y-C N-T
RESET
SALES
DAILY
Return to Z mode.
[C] or [T]
Z1.0
38
Z mode.
Lamp Z turns on.
PLU file.
3. PROGRAM MODE
3.1 Programmable Files
In Programming Mode, there are two ways to select the Programming File by using different keys such as:
Data files
Key To Press
Data files
[1]
PLU Programming
[1] [7]
Logo Programming
[2]
Department Programming
[1] [8]
Tax Programming
[3]
[1] [9]
[4]
Key Assignment
[2] [0]
Memory Status
[5]
[2] [1]
I/F Test
[6]
Advertisement Programming
[2] [2]
File Load
[7]
Vender Programming
[8]
[9]
[1] [0]
Ingredients Programming
[1] [1]
Text Programming
[1] [2]
[1] [3]
[1] [4]
[1] [5]
Place Programming
[1] [6]
Machine setting
39
SHO P
D EPT.
M .G .
P LU
PLU
M .G.
PLU
D EPT.
P LU
M .G.
PLU
PLU
40
M .G .
P LU
PLU
PLU File
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S2
DEPT
FILE
[*]
S2.0
DEPT
NO SET
[1]
S2.0
DEPT
NO SET
[*]
S2.1
DEPT
[MODE][MODE]
[MODE]
[2] or [X][]
NAME 0
REMARK
Enter S mode.
Lamp S turns on.
Select Department Programming.
/kg window displays DEPT.
code.
Enter department No.(Ex. [1])
Enter department programming,
set the department name.
Enter
DEPT.
name(use
letter
S2.1
DEPT
MEAT
NAME 4
1)
The methods of ASII letter input
refer to 3.23 ASSII Character Input
Method.
[PLU]
S2
DEPT
FILE
Note1: Number after "NAME" in Total display shows the position of the cursor.
Note2: The DEPT. No.1 to No.99 are available for programming.
(No.97 is default No. for PLU programming, and the PLUs which are not linked to any DEPT No. are assigned
to No.97)
(Non-PLU files (Weighing items) are assigned to DEPT code No.98)
(Non-PLU files (Non-weighing items) are assigned to DEPT code No.99)
Note3: The Department names programmed are not printed on the label/receipt but are for reporting.
41
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S2
DEPT
FILE
[*]
S2.0
DEPT
NO SET
[1]
S2.0
DEPT
NO SET
[]
S2.0
DEPT
DEL
Y-C N-T
[C]
S2
DEPT
FILE
[MODE][MODE]
[MODE]
[2] or []
REMARK
Enter S mode.
Lamp S turns on.
Select Department Programming.
/kg window indicates DEPT.
code.
Enter department No.(Ex. [1])
Delete Dept. No.1 for MEAT.
[C] for Yes, [T] for No.
Delete the Dept. file 1,
back to S mode.
Note1: When the MAIN GROUP FILE exists under the Department File, the Department Number cannot be
deleted. In addition, the Department Number 97, 98 and 99 cannot be deleted.
42
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S3
MGROUP
FILE
[*]
S3.0
MG
NO SET
[1][1][1]
S3.0
MG
111
NO SET
[*]
S3.1
MG
[1]
S3.1
MG
[*]
S3.2
MG
[B][E][E][F]
S3.2
MG
BEEF
NAME 4
[*]
S3.3
MG
TAX NO
[1]
S3.3
MG
TAX NO
[MODE][MODE]
[MODE]
[3] or []
97
(default)
1
DEPT NO
DEPT NO
NAME 0
REMARK
Enter S mode.
Lamp S turns on.
Select Main Group Programming.
/kg window indicates Main
Group code.
Select Main Group No.
(Ex. [1][1][1])
Enter Main Group programming,
Set the Department number.
Link
Main
Group
111
to
Department 1.
Name of the Main Group 111 is
BEEF.
Set the Tax number.
Tax of Main Group 111 is tax
number 1.
Store the Main Group file, back to S
[PLU]
S3
MGROUP
FILE
Note1: For tax rate programming, refer to 3.20 Tax File in S Mode. if not necessary to link the Tax Number, press [*]
key to enter next selection. This procedure will skip if SPEC 603 is set to "NO TAX".
Note2: Number after "NAME" in Total display shows the position of the cursor.
Note3: The Main Group No.1 to No.997 are available for PLU programming.
43
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S3
MGROUP
FILE
[*]
S3.0
MG
NO SET
[1][1][1]
S3.0
MG
111
NO SET
[]
S3.0
MG
DEL
Y-C N-T
[C]
S3
MGROUP
FILE
[MODE][MODE]
[MODE]
[3] or []
REMARK
Enter S mode.
Lamp S turns on.
Select Main Group Programming
and
Enter it.
Enter Main Group No.
(Ex. [1][1][1])
[C] for Yes, [T] for No.
Delete M.G. file 111,back to S
mode.
Note1: When the PLU FILE exists under the Main Group File, the Main Group Number cannot be deleted. In
addition, the Main Group Number 997, 998 and 999 cannot be deleted.
44
Display
Parameter
Symbol
[LABFR1]
1. Label format 1
LABFR1
[LABFR2]
2. Label format 2
LABFR2
[BACODE]
3. Barcode Selection
BACODE
[FLAG]
FLAG
[ITCODE]
ITCODE
[MGCODE]
MGCODE
[SELLDT]
7. Sell by Date
SELLDT
[SELLTM]
8. Sell by Time
SELLTM
[USEDDT]
9. Used by Date
USEDDT
10
[PACKDT]
PACKDT
11
[PACKTM]
PACKTM
12
[COST]
12. Cost
COST
13
[TARE]
13. Tare
TARE
14
[QTY]
14. Quantity
QTY
15
[Q.UNIT]
QUNIT
16
[DISCNT]
DISCNT
17
[SCH DT]
SCHDT
18
[SCH TM]
SCHTM
19
[MARKDN]
MARKDN
20
[1STLMT]
FSTLMT
21
[2NDLMT]
SNDLMT
22
[SMGNUM]
SMGNUM
23
[INGNUM]
23. Ingredients #
INGNUM
24
[COMNAM]
COMNAM
25
[SP MG]
SPMG
26
[INGR]
26. Ingredients
INGR
27
[PLCNUM]
PLCNUM
28
[IMAGE]
28. Image
IMAGE
29
[BONUS]
29. Bonus
BONUS
30
[NUTRI]
30. Nutrition
NUTRI
31
[ITFSEL]
ITFSEL
32
[REFPLU]
REFPLU
33
[SECPLU]
SECPLU
34
[COUPLU]
COUPLU
45
No.
Parameter
Symbol
35
[DAY WK]
DAYWK
36
[ADD-ON]
ADDON
37
[TAX]
TAX
38
[PRICE2]
PRICE2
39
[% TARE]
PROTARE
40
[CUSDIS]
CUSDIS
41
[RESDIS]
RESDIS
42
[STADIS]
STADIS
43
[TRACE]
TRACE
44
[TEMP]
TEMP
45
[PACK.I]
PACKI
46
[M1BARC]
M1BARC
47
[M2BARC]
M2BARC
48
[TM1BAR]
TM1BAR
49
[TM2BAR]
TM2BAR
50
[U.PRIC]
UPRIC
51
[PLUSCR]
PLUSCR
52
[PLUTEX]
PLUTEX
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S19
PLU
ITEM
[*]
S19.1
ITEM
[*][*][*][*][*]
S19.1
ITEM
[X]
S19.1
S19
[MODE][MODE]
[MODE]
[1][9] or []
[PLU]
REMARK
Enter S mode.
Lamp S turns on.
Select PLU item Selection Mode
and enter
PROGRAM
MGCODE
SKIP
ITEM
MGCODE
PROGRAM
PLU
ITEM
LABFR1
Select
PROGRAM
for
the
Note1: Press [*] key to next parameter or [] key to previous parameter and press [X] key to select PROGRAM or
SKIP for each parameter, if necessary.
Note2: If you want to exit without saving, press [] key follow by [C] key.
46
Remarks
S1.0
PLU No.
S1.1
S1.2
S1.3
S1.4
S1.4
Commodity Name
S1.5
S1.6
S1.7
Flag data
S1.8
* Digits of Flag and Item data can be selected in the barcode type
selection in S1.6.
S1.9
S1.10
S1.11
S1.12
S1.13
S1.14
S1.15
S1.16
S1.17
S1.18
S1.19
S1.20
S1.21
S1.22
47
Remarks
S1.23
S1.24
S1.25
Cost price
S1.26
PLU Tare
S1.29
S1.30
S1.31
S1.32
S1.33
S1.34
S1.35
S1.36
S1.37
S1.38
S1.39
S1.41
S1.42
S1.43
S1.44
S1.45
S1.46
S1.47
S1.48
Proportional Tare
S1.40
48
Remarks
S1.0
PLU No.
S1.1
S1.2
S1.3
S1.4
S1.4
Commodity Name
S1.5
S1.6
S1.7
Flag data
S1.8
* Digits of Flag and Item data can be selected in the barcode type
selection in S1.6.
S1.9
S1.10
S1.11
S1.12
S1.13
S1.14
S1.15
S1.16
S1.17
S1.18
S1.19
S1.20
S1.21
S1.22
S1.23
S1.24
S1.25
Cost price
S1.27
S1.28
Quantity
S1.29
49
Remarks
S1.30
S1.31
S1.32
S1.33
S1.34
S1.35
S1.36
S1.37
S1.38
S1.39
S1.40
S1.41
S1.42
S1.43
S1.44
S1.45
S1.46
S1.47
50
OPERATION
DISPLAY
PT
kg
/kg
S1
PLU
FILE
[*]
S1.0
PLU
NO SET
[1][0][0]
S1.0
PLU
100
NO SET
[*]
S1.1
PLU
0.00
PR-KG
[MODE][MODE]
[MODE]
REMARK
Enter S mode.
Lamp S turns on.
Enter PLU programming mode.
/kg window displays PLU number.
Enter new PLU Number (Ex. 100) you want.
Enter PLU programming.
Enter unit price.(Ex.5.80/kg)
Select Label format for 1st Label by press [<<]
[5][8][0][*]
S1.2
PLU
DFT
0 LAB FR1
or [>>] key.
(T1~T12,S,A,B,C,F1~F8 is available)
[<<] or [>>]
S1.2
PLU
T6
6 LAB FR1
[*]
S1.3
PLU
NO
0 LAB FR2
or [>>]key.
(F1~F8 only)
[<<] or [>>]
S1.4
C01.01
S1 A 100
S1.4
C02.01
S1 A 100
[*]
S1.5
PLU
EAN
BARCODE
[*]
S1.6
PLU
DFLT
BARCODE
[*]
[S][L][I][C][E]
[*]
[<<] or [>>]
[*]
S1.7
PLU
20
FLAG
[2][9]
[*]
S1.8
PLU
00000
IT CODE
51
DISPLAY
PT
kg
/kg
S1.9
PLU
00000
EX CODE
S1.10
PLU
EAN
REMARK
No appended item code of PLU 100.
ADD
OFF
EAN ADD-OFF)
Set the Main Group number.(default MG 997)
[*]
S1.12
PLU
997
MG NO
[1][1][1]
[*]
[<<] or [>>]
[*]
[3]
[*]
PLU
NPRINT
SELL DT
sell-by-date.
(Ex. Print sell by date)
S1.14
PLU
SELL DT
S1.15
PLU
NPRINT
SELL TM
sell-by-time.
(Ex. No print sell by time)
Press [<<] or [>>] key to change whether print
[*]
S1.18
PLU
NPRINT
USED DT
used by date.
(Ex. No print used by date)
Set used-by-date,
used-by-time
[*]
[<<] or [>>]
[*]
[1][*]
[<<] or [>>]
[*]
[<<] or [>>]
[*]
[1][8][0][0]
[*]
[*]
S1.20
PLU
NPRINT
PACK DT
S1.21
PLU
PACK DT
present date.
(Ex. 1 day after present day)
S1.22
PLU
NPRINT
PACK TM
S1.23
PLU
TIME
PRESENT
S1.24
PLU
0000
PACK TM
S1.25
PLU
0.00
COST
S1.26
PLU
0.000
TARE
52
[*]
[1][0][0]
[*]
[3][0]
[*]
[1][0][0][0]
[*]
[5][0]
[<<] or [>>]
[*]
[1][0][0][1][0][4]
[*]
[0][9][0][0]
[*]
[1][1][0][1][0][4]
[*]
[0][9][0][0]
[1]
[PLU]
kg
/kg
REMARK
PLU
NO
DISCONT
S1.30
PLU
0.000
1ST LMT
S1.31
PLU
0.00
1ST AMT
S1.32
PLU
99.999
2ND LMT
S1.33
PLU
0.00
2ND AMT
S1.34
[*]
[1][*]
PT
[<<] or [>>]
[*]
DISPLAY
PLU
NO
MARK
DOWN
S1.35
PLU
000000
ST DATE
S1.36
PLU
0000
ST TIME
S1.37
PLU
000000
ED DATE
S1.38
PLU
0000
ED TIME
S1.40
PLU
SMG NUM
S1.41
PLU
ING NUM
S1
PLU
ITEM
YY)
53
DISPLAY
PT
kg
/kg
S1
PLU
FILE
REMARK
Enter S mode.
Lamp S turns on.
Enter PLU programming mode.
[*]
S1.0
PLU
NO SET
[2][0][0]
S1.0
PLU
200
NO SET
[*]
S1.1
PLU
0.00
PR-KG
S1.1
PLU
5.80
PR-PCS
[<<] or [>>]
[5][8][0]
[*]
S1.2
PLU
DFT
0 LAB FR1
is
available)
[<<] or [>>]
S1.2
PLU
T6
6 LAB FR1
[*]
S1.3
PLU
NO
0 LAB FR2
[<<] or [>>]
[*]
S1.4
C01.01
S1 A 100
54
Enter
commodity
CAKE)
name.(Ex.
DISPLAY
PT
kg
S1.4
C02.01
[*]
S1.5
PLU
EAN
BARCODE
[*]
S1.6
PLU
DFLT
BARCODE
[C][A][K][E]
[*]
/kg
REMARK
S1 A 100
[<<] or [>>]
[*]
S1.7
PLU
20
FLAG
[2][9]
[*]
[2][0][0][2][0]
[*]
[*]
S1.8
PLU
00000
IT CODE
S1.9
PLU
00000
EX CODE
S1.10
PLU
EAN
ADD OFF
[*]
S1.12
PLU
997
MG NO
the
Main
Group
number.(default MG 997)
Enter Main Group No.(Ex.222)
Link PLU 200 to Main Group 222.
[2][2][2]
[*]
[<<] or [>>]
[*]
[3]
[*]
[*]
Set used-by-date,
used-by-time
PLU
NPRINT
SELL DT
S1.14
PLU
SELL DT
S1.15
PLU
NPRINT
SELL TM
S1.18
PLU
NPRINT
USED DT
55
DISPLAY
PT
kg
/kg
S1.20
PLU
NPRINT
PACK DT
REMARK
Press [<<] or [>>] key to change
whether print packed date.
If necessarily, packed date can set
S1.21
PLU
PACK DT
S1.22
PLU
NPRINT
PACK TM
S1.23
PLU
TIME
PRESENT
S1.24
PLU
0000
PACK TM
S1.25
PLU
0.00
COST
S1.27
PLU
PCS
USYMBOL
symbol.
Selection: PCS/FOR/kg/lb/g/NO
[<<] or [>>]
[*]
[1][0]
[*]
S1.28
PLU
QTY
S1.29
PLU
NO
DISCONT
[<<] or [>>]
[*]
PLU
NO
MARK DOWN
down
/Total price mark down/all mark
down
[<<] or [>>]
[*]
[1][0][0][1][0][4]
[*]
[0][9][0][0]
[*]
S1.35
PLU
000000
ST DATE
S1.36
PLU
0000
ST TIME
S1.37
PLU
000000
ED DATE
56
DISPLAY
PT
kg
/kg
S1.38
PLU
0000
ED TIME
REMARK
[0][9][0][0]
[*]
S1.40
PLU
SMG NUM
special
message
file
number.(Ex. Number 1)
Special message file 1 is linked to
this PLU.
Set ingredients file number.(Ex.
[1][*]
S1.41
PLU
ING NUM
Number 1)
Ingredients file 1 is linked to this
PLU.
[1]
[PLU]
S1
PLU
ITEM
57
OPERATION
REMARK
PT
kg
/kg
S1
PLU
FILE
[*]
S1.0
PLU
NO SET
[1][2][4]
S1.1
PLU
124
NO SET
[X]
S1.1
PLU
COPY
S1.1
PLU
5.80
PR-KG
S1.2
PLU
T6
6 LAB FR1
[*]
S1.3
PLU
NO
0 LAB FR2
[*]
S1.4
C01.01
SLICE
S1 A 95
S1.8
PLU
10100
IT CODE
[1][0][1][2][4]
S1.8
PLU
10124
IT CODE
[*]
S1.9
PLU
00000
EX CODE
S1
PLU
FILE
[MODE][MODE]
[MODE]
[1][0][0]
[*]
[4][8][0]
[*]
[PLU]
58
Enter S mode.
Lamp S turns on.
Enter PLU programming mode.
/kg window displays PLU number.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
REMARK
Enter S mode.
Lamp S turns on.
Enter PLU programming mode.
[*]
S1.0
PLU
NO SET
[1][2][4]
S1.0
PLU
124
NO SET
[]
S1.0
PLU
DEL ?
Y-C N-T
[C]
S1
PLU
FILE
59
Formula
Example
Price = 0
Total Price = 0
(1) Unit Price = Original Unit Price Unit Price discount amount.
60
Total Price
No Mark Down
$1.50
$15.00
$ 2.00
$15.00
1.50
Total Price Mark Down
Unit & Total Price Mark Down
$1.50
Refer to Note 1
20.00
15.00
$ 2.00
$ 20.00
1.50
15.00
Note 1: Since discount unit price cannot be calculated if Total Price discount is used, it is not able to use Unit Price
Mark Down function, when using Total Price discount and Free item discount.
61
DISPLAY
PT
kg
/kg
S1
PLU
FILE
REMARK
Enter S mode.
Lamp S turns on.
Select memory status check mode.
[2][0]
S20
MEMORY
STATUS
[*]
S20.0
PLU
[T]
S20
LF 4544
MEMORY
62
STATUS
Back to S mode.
DISPLAY
REMARK
PT
kg
/kg
S1
PLU
FILE
S4
KEY
ASSIGNMENT
[*]
S4.0
PS AS
NO SET
[1][0][0]
S4.0
PS AS
100
NO SET
[PRESET 1]
S4.0
PS AS
NO SET
S4
KEY
ASSIGNMENT
[MODE][MODE]
[MODE]
[4] or [] three times
[][C]
Enter S mode.
Lamp S turns on.
Key Assignment mode is MENU 4
in S mode.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S4
KEY
ASSIGNMENT
S4.0
PS AS
NO SET
63
REMARK
Enter S mode.
Lamp S turns on.
Key Assignment mode is MENU 4
in S mode.
Enter PLU assignment mode.
DISPLAY
PT
kg
/kg
[*]
S4.1
VR AS
NO SET
[*]
S4.2
FN AS
CLEAR
[X][X]
S4.0
FN AS
-PRICE
REMARK
Enter Vender Key assignment status.
Enter Function Key assignment
status.
Select PRICE DISCOUNT function
PRICE DISCOUNT function had
[PRESET 25]
S4.2
FN AS
CLEAR
[][C]
S4
KEY
ASSIGNMENT
Back to S mode.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S4
KEY
ASSIGNMENT
[*]
S4.0
PS AS
NO SET
[*]
S4.2
FN AS
CLEAR
[PRESET 25]
S4.0
FN AS
DEL ?
Y-C N-T
[C]
S4.0
FN AS
CLEAR
S4
KEY
ASSIGNMENT
[MODE][MODE]
[MODE]
[4] or [] three times
[][C]
REMARK
Enter S mode.
Lamp S turns on.
Key Assignment mode is MENU 4
in S mode.
Enter PLU assignment mode.
Enter Function Key assignment
status.
Enter deleting mode.
[C] for Yes, [T] for No.
Back to S mode.
64
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S5
SHOP
NAME FILE
[*]
S5.0
SHOP
NO SET
[1][*]
S5.1
S01.01
[MODE][MODE]
[MODE]
[5] or [] four times
S1 A 100
REMARK
Enter S mode.
Lamp S turns on.
Shop name File mode is MENU 5
in S mode.
Enter
Shop
Name
File
programming mode.
Enter shop name code.(Ex.No.1)
Press [SIZE] key to change font
[SIZE][D][I][G][I][SP
][S][H][O][P]
S5.1
S01.10
SHOP
S2 A 76
[*]
S5.1
S02.01
S1 A 100
[T][E][L][:]
S5.1
S02.13
S1 A 88
S5
[PLU]
SHOP
NAME FILE
65
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S5
SHOP
NAME FILE
[*]
S5.0
SHOP
NO SET
[1]
S5.0
SHOP
NO SET
[]
S5.0
SHOP
DEL ?
Y-C N-T
[C]
S5
SHOP
NAME FILE
[MODE][MODE]
[MODE]
[5] or [] four times
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Shop Name File can not be deleted.
66
REMARK
Enter S mode.
Lamp S turns on.
Shop name File mode is MENU 5
in S mode.
Enter
Shop
Name
File
programming mode.
Enter shop name file 1.(Ex. No.1)
Enter deleting mode.
[C] for Yes, [T] for No.
Delete Shop Name File 1,back to S
mode.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S6
ADVER
MESSAGE
[*]
S6.0
ADVER
NO SET
[1][*]
S6.1
A01.01
[MODE][MODE]
[MODE]
[6] or [] five times
[T][H][A][N][K][SP]
[Y][O][U]
S1 A 100
Enter S mode.
Lamp S turns on.
Select
advertisement
file
programming
mode.
Enter advertisement File programming
mode.
Enter the advertisement File No.1(Ex.No.1)
Enter the advertisement as the same
S6.1
A01.10
K YOU
S1 A 91
[SIZE]
S6.1
A01.10
K YOU
S2 A 76
[SIZE][SIZE]
S6.1
A01.10
K YOU
L5 A 21
[*]
S6.1
A02.01
S6
[PLU]
REMARK
ADVER
S1 A 100
MESSAGE
Note1: Max.2 line per file are available, max.100 letters per line are available. (letters per line depends on font size)
67
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S6
ADVER
MESSAGE
[*]
S6.0
ADVER
NO SET
[1]
S6.0
ADVER
NO SET
[]
S6.0
ADVER
DEL ?
Y-C N-T
[C]
S6
ADVER
MESSAGE
[MODE][MODE]
[MODE]
[6] or [] five times
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Advertisement File can not be deleted
68
REMARK
Enter S mode.
Lamp S turns on.
Select
advertisement
file
programming mode.
Enter
advertisement
File
programming mode.
Enter
advertisement
File
1.(Ex.
No.1)
Enter deleting mode.
[C] for Yes, [T] for No.
Delete advertisement File 1,back to
S mode.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S7
VENDER
FILE
S7.0
CLERK
NO SET
REMARK
Enter S mode.
Lamp S turns on.
Select
Vender
file
programming mode.
Enter
Vender
File
programming mode.
Select vender key.(Ex. V1)
[1][*]
S7.1
CLERK
NAME 0
[M][I][K][E]
[PLU]
S7.1
CLERK
MIKE
NAME 4
S7
VENDER
FILE
69
Enter
operator
name
for
V1.(Ex. MIKE)
Store Vender File V1,back to S
mode.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S8
DATE
AND TIME
P8.0
DATE
010100
MMDDYY
REMARK
Enter S mode.
Lamp S turns on.
Select
Date
and
Time
programming mode.
Enter
Date
and
Time
programming mode.
Set Month 08, Day 19 and
[0][8][1][9][0][4][*]
P8.1
TIME
0000
HHMM
Year 04.
(Ex. 2004-08-19)
Set Hour 9,Minute 05.
[9][0][0][*]
S8
DATE
AND TIME
70
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S9
SP
MESSAGE
[*]
S9.0
SP MG
NO SET
[1][*]
S9.1
M01.01
[MODE][MODE]
[MODE]
[9] or [] eight times
[M][A][D][E][SP][I][N
][SP][C][H][I][N][A]
S1 A 100
Enter S mode.
Lamp S turns on.
Select special message file programming
mode.
Enter special message File programming
mode.
Enter
the
special
message
File
No.1.(Ex.No.1)
Enter the special message File as the same
S9.1
M01.14
CHINA
S1 A 87
[SIZE]
S9.1
M01.14
CHINA
S2 A 72
[SIZE][SIZE]
S9.1
M02.01
CHINA
M3 A 62
[*]
S9.1
M02.01
S9
[PLU]
REMARK
S1 A 56
SP
MESSAGE
71
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S9
SP
MESSAGE
[*]
S9.0
SP MG
NO SET
[1]
S9.0
SP MG
NO SET
[]
S9.0
SP MG
DEL ?
Y-C N-T
[C]
S9
SP
MESSAGE
[MODE][MODE]
[MODE]
[9] or [] eight times
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Special Message File can not be deleted.
72
REMARK
Enter S mode.
Lamp S turns on.
Select
special
message
file
programming mode.
Enter
special
message
File
programming mode.
Enter special message File 1.(Ex.
No.1)
Enter deleting mode.
[C] for Yes, [T] for No.
Delete special message File 1,back
to S mode.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S10
INGR
FILE
[*]
S10.0
INGR
NO SET
[1][*]
S10.1
G01.01
[MODE][MODE]
[MODE]
[10] or [] nine times
S1 A 100
REMARK
Enter S mode.
Lamp S turns on.
Select
Ingredient
file
programming mode.
Enter
Ingredient
File
programming mode.
Enter
the
Ingredient
File
No.1.(Ex.No.1)
Enter the Ingredient File as the
[S][U][G][A][R]
S10.1
G01.06
SUGAR
S1 A 100
[SIZE]
S10.1
G01.06
[*]
S10.1
G02.01
[F][L][O][U][R]
S10.1
G02.06
FLOUR
S1 A95
S10
INGR
FILE
[PLU]
SUGAR
S2 A 95
S1 A 100
73
2nd
line
of
this
Ingredient File.
Store Ingredient File 1,back to S
mode.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S10
INGR
FILE
[*]
S10.0
INGR
NO SET
[1]
S10.0
INGR
NO SET
[]
S10.0
INGR
DEL ?
Y-C N-T
[C]
S10
INGR
FILE
[MODE][MODE]
[MODE]
[10] or [] nine times
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Ingredients File can not be deleted.
74
REMARK
Enter S mode.
Lamp S turns on.
Select
Ingredient
file
programming mode.
Enter
Ingredient
File
programming mode.
Enter Ingredient File 1.(Ex.
No.1)
Enter deleting mode.
[C] for Yes, [T] for No.
Delete Ingredient File 1,back to
S mode.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S11
TEXT
FILE
[*]
S11.0
TEXT
NO SET
[1][*]
S11.1
T01.01
[MODE][MODE]
[MODE]
[11] or [] ten times
S1 A 100
REMARK
Enter S mode.
Lamp S turns on.
Select Text file programming
mode.
Enter Text File programming
mode.
Enter
the
Text
File
No.1.(Ex.No.1)
Enter the Text File as the same
[P][A][C][K][A][G][E]
S11.1
T01.08
CKAGE
S1 A 93
[SIZE]
S11.1
T01.08
CKAGE
S2 A 78
[SIZE][SIZE]
S11.1
T01.08
CKAGE
S5 A 53
[*]
S11.1
T02.01
[D][A][T][E]
S11.1
T02.05
DATE
S1 A 52
S11
TEXT
FILE
[PLU]
S1 A 56
75
2nd
line
of
this
Ingredient File.
Store Text File 1,back to S mode.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S11
TEXT
FILE
[*]
S11.0
TEXT
NO SET
[1]
S11.0
TEXT
NO SET
[]
S11.0
TEXT
DEL ?
Y-C N-T
[C]
S11
TEXT
FILE
[MODE][MODE]
[MODE]
[11] or [] ten times
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Text File can not be deleted.
76
REMARK
Enter S mode.
Lamp S turns on.
Select Text file programming
mode.
Enter Text File programming
mode.
Enter Text File 1.(Ex. No.1)
Enter deleting mode.
[C] for Yes, [T] for No.
Delete Text File 1,back to S
mode.
Up to 99 Free Formats can be stored in the memory, apart from the other 16 standard formats.
Standard format can be used as a basic format for creating a new format.
Print position of each item is programmed using "mm".
One Item label or one Total label is available for each Free Format number (F1~F99).
4 Print Angles can be set for all item data: 0, 90, 180 and 270 degrees.
77
78
Print Angle
Print angle of each Print Item can be selected from 4 different angles, 0 degree, 90 degree, 180 degree,
and 270 degree. A whole format base or each Item Data-base may set print angle. According to the
selected print angle, the status of print position differs as the following samples.
79
Display
1. PLU NO
PLUno
2. PRICE (-TAX)
PRICE
3. UNIT PRICE
UN PR
47 ~ 56.IMAGE 1 ~ IMAGE 10
4. WEIGHT
WT
5. QUANTITY
QTY
6. PACKED DATE
PDATE
BONUS
7. PACKED TIME
PTIME
EUR U
8. COMMODITY
COMM
EUR T
9. QUANTITY UNIT
QTYSY
EUR C
SDATE
STIME
12. BARCODE
BARCD
BORN
SHOPN
FAT
DISCT
SLAUG
UDATE
CUT H
16. LOGO
LOGO
70. REFER NO
FEF D
MG CD
71. ORIGIN
ORIGI
DEPT
72. TEMPERATURE
TEMP
SCLNO
M1BAR
20. INGREDIENT
INGR
M2BAR
SP MG
75. SERIAL NO
22. FRAME 1
FRM 1
23. FRAME 2
FRM 2
77. REWRAP
24. TARE
TARE
78. KIND
25. CLERK
CLERK
79. CATEGORY
TXT??
80. BREED
PRTAX
81. CONTACT
TAX R
82. GTIN
44. PLACE
PLACE
Item Data
Item Data
Ty
pe
Display
IMG??
Note: When SPEC 158 set to "ENABLE" the Screen of Item no.2 will change to "DISCOUNT PRICE" & item
Number 3 change to "DISCOUNT UNIT PRICE", and Item Number of 45 & 46 will appears.
80
Type
Display
Item Data
Type
Display
1. PLU NO
PLUno
P-TAX
2. PACK DATE
PDATE
ATX
3. WEIGHT
WT
VTX
4. QUANTITY
QTY
ERUO
5. QUANTITY UNIT
QTYSY
UDATE
6. PRICE (+ TAX)
PRTAX
BORN
7. PACKED TIME
PTIME
FAT
8. TOTAL TITLE
TOTAL
SLAUG
9. BARCODE
BARCD
CUT H
10. CLERK
CLERK
REF D
11. TEXT 17
TXT17
ORIGI
12. TEXT 18
TXT18
M1BAR
13. TEXT 19
TXT19
M2BAR
14. TEXT 20
TXT20
28. SERIAL NO
Type 1
Type 2
Type 3
Type 4
X position
YES
YES
YES
YES
Y position
YES
YES
YES
YES
Angle
YES
YES
YES
NO
Status
YES
YES
YES
YES
Character Size
YES
NO
NO
NO
Width
NO
YES
NO
NO
Height
NO
YES
YES
NO
Thickness
NO
NO
NO
YES
81
DISPLAY
PT
kg
/kg
S1
PLU
FILE
S12
FREE
FORMAT
REMARK
Enter S mode.
Lamp S turns on.
Select
S12.0
FREE
1-99
Format
setting
programming mode.
Enter
[*]
Free
Free
Format
setting
programming mode.
Select
Free
Format
File
Number.
[1][*]
S12.1
LABEL
WT MM
[4][8][*]
S12.2
LABEL
HT MM
[3][5][*]
S12.3
LABEL
DG ANGLE
Label
width.(Ex.48mm)
Enter
Label
height.(Ex.35mm)
[<<] or [>>] key can change the
[<<] or [>>]
S12.3
LABEL
90
DG ANGLE
[*]
S12.4
LABEL
ITEM
LABEL
[<<] or [>>]
S12.4
LABEL
TOTAL
LABEL
[*]
S12.5
PLUno
F ITEM
82
Item Label: PLU No., Price, Unit Price, Weight, Quantity, Packed date, Packed Time, Quantity
Symbol, Sell by date, Sell by time, Discount Price, Used by date, MG No., Dept. No., Scale No., Tare
Weight, Clerk No., and Text data.
Total Label: PLU No., Packed date, Total Weight, Total quantity, Quantity symbol, Total Price,
Packed time, Letter of TOTAL, Clerk No., and Text data.
OPERATION
DISPLAY
PT
kg
/kg
REMARK
Continued from the procedure Basic Setting: (width, height, angle and label type)
S12.5
PLUno
[*]
S12.5
PLUno
X MM
Enter X value.(Ex.1mm)
[1][*]
S12.5
PLUno
Y MM
Enter Y value.(Ex.1mm)
[1][*]
S12.5
PLUno
DG ANGLE
[>>][*]
S12.5
PLUno
STATUS
[7][*]
S12.5
PLUno
S1
CHAR SIZE
F ITEM
S12.5
PLUno
S5
CHAR SIZE
[*]
S12.5
PLUno
F ITEM
Note 1: STATUS TYPE: 0: NO Print 3: Weighing Item 4: Non-weighing Item 7: All Item Print
Note 2: Up to 41 different item data can be programmed in Item Label Format and is used for printing at
Manual Mode and Pre-pack Mode.
Note 3: Up to 14 different item data can be programmed in Total Label Format and is used for printing multiple
transaction labels for counter sales at Manual Mode, Sub-Total and Grand Total at Pre-pack Mode.
Note 4: There are two ways to select the Item Data in Free Format programming by using different keys such as:
83
Item Label: Commodity Name, Shop Name, Logo, Ingredient, and Special Message.
OPERATION
DISPLAY
PT
kg
/kg
REMARK
Continued from the procedure Basic Setting: (width, height, angle and label type)
S12.5
SHOPN
F ITEM
[*]
S12.5
SHOPN
X MM
Enter X value.(Ex.10mm)
[1][0][*]
S12.5
SHOPN
Y MM
Enter Y value.(Ex.1mm)
[1][*]
S12.5
SHOPN
DG ANGLE
13
[>>][>>][*]
S12.5
SHOPN
WT MM
[2][0][*]
S12.5
SHOPN
HT MM
[1][5][*]
S12.5
SHOPN
STATUS
[7]
S12.5
SHOPN
STATUS
[*]
S12.5
SHOPN
13
F ITEM
84
DISPLAY
PT
kg
/kg
REMARK
Continued from the procedure Basic Setting: (width, height, angle and label type)
S12.5
BARCD
[*]
S12.5
BARCD
X MM
Enter X value.(Ex.5mm)
[5][*]
S12.5
BARCD
Y MM
Enter Y value.(Ex.20mm)
[2][0][*]
S12.5
BARCD
DG ANGLE
12
F ITEM
[>>][*]
S12.5
BARCD
HT MM
[2][5][*]
S12.5
BARCD
STATUS
[7]
S12.5
BARCD
STATUS
[*]
S12.5
BARCD
12
F ITEM
85
DISPLAY
PT
kg
/kg
REMARK
Continued from the procedure Basic Setting: (width, height, angle and label type)
S12.5
FRM 1
[*]
S12.5
FRM 1
X MM
Enter X value.(Ex.10mm)
[1][0][*]
S12.5
FRM 1
Y MM
Enter Y value.(Ex.1mm)
22
F ITEM
Enter X1 value.
[1][*]
S12.5
FRM 1
X1 MM
[2][0][*]
S12.5
FRM1
Y1 MM
[1][5][*]
S12.5
FRM 1
STATUS
[7][*]
S12.5
FRM 1
T MM
[2][*]
S12.5
FRM 1
22
F ITEM
86
DISPLAY
REMARK
PT
kg
/kg
S1
PLU
FILE
Enter S mode.
[1][2][*]
S12.0
FREE
1-99
Enter X value.(Ex.10mm)
[1]
S12.0
FREE
1-99
[X]
S12.0
FREE
NO
[7] or
[<<] and [>>]
[*][PLU]
COPY
S12.0
FREE
T7
COPY
S12
FREE
FORMAT
Note1: Another way to select the existing label format to copy by press [<<] Key or [>>] Key.
DISPLAY
PT
kg
/kg
S12.0
FREE
1-99
[1]
S12.0
FREE
1-99
[]
S12.0
FREE
DEL ?
Y-C N-T
[C]
S12.0
FREE
FORMAT
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Free Format File can not be deleted.
87
REMARK
Enter
Free
Format
programming mode.
Enter free format file number 1.
Enter delete mode.
[C] for Yes,[T] for No.
Delete free format file 1, back to
S mode.
88
DISPLAY
PT
kg
/kg
S12
FREE
FORMAT
REMARK
At Free Format program mode
Enter
[*]
S12.0
FREE
1-99
Free
Format
setting
programming mode.
Select Free Format File Number.
[8]
S12.0
FREE
[X]
S12.0
FREE
[8] or
[<<] and [>>]
[*]
1-99
NO
COPY
S12.0
FREE
T8
COPY
S12.1
LABEL
56
WT MM
[*]
S12.2
LABEL
55
HT MM
[*]
S12.3
LABEL
DG ANGLE
[*]
S12.4
LABEL
ITEM
LABEL
[*]
S12.5
PLUno
F ITEM
[*][*][*][*]
S12.5
PLUno
STATUS
[C]or[0]
S12.5
PLUno
STATUS
[*][*]
S12.5
PLUno
F ITEM
[8]
S12.5
COMM
F ITEM
change).
Change print angle.( Ex. No
change)
Commodity
Name
program mode.
Enter Y position setting mode
[*][*][3][2]
S12.5
COMM
23
Y MM
[*]
S12.5
COMM
DG ANGLE
89
DISPLAY
PT
kg
/kg
REMARK
S12.5
COMM
15
HT MM
[*]
S12.5
COMM
STATUS
[*]
S12.5
COMM
F ITEM
[2][0]
S12.5
INGR
20
F ITEM
[*]
S12.5
INGR
X MM
[2][*]
S12.5
INGR
Y MM
[2][3][*]
S12.5
INGR
DG ANGLE
[*]
S12.5
INGR
WT MM
[5][4][*]
S12.5
INGR
HT MM
[1][0][*]
S12.5
INGR
STATUS
[7][*]
S12.5
INGR
[PLU]
S12
F ITEM
20
FREE
FORMAT
90
OPERATION
REMARK
PT
kg
/kg
S1
PLU
FILE
[1][5][*]
S15.0
PLACE
NO SET
[1][*]
S15.1
P01.01
S1 A100
Enter S mode.
S15.1
P01.13
DIGI
S1 A 88
[SIZE][SIZE]
[PLU]
S15.1
P01.13
DIGI
S5 A 48
S15
PLACE
FILE
DISPLAY
REMARK
PT
kg
/kg
S15.0
PLACE
NO SET
[1]
S15.0
PLACE
NO SET
[]
S15.0
FREE
DEL ?
Y-C N-T
[C]
S15
PLACE
FILE
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Place File can not be deleted.
91
DISPLAY
REMARK
PT
kg
/kg
S1
PLU
FILE
Enter S mode.
[1][6][*]
S16.0
RATE
0.00
DISC
[5][0][0]
S16.0
RATE
5.00
DISC
S16
MACHIN
SETTING
[*]
92
93
[1]
[<<]
[>>]
[]
[]
[*]
[PLU]
94
DISPLAY
REMARK
PT
kg
/kg
S1
PLU
FILE
Enter S mode.
[1][7][*]
S17.0
LOGO
NO
SET
[1][*]
S17.1
LOGO
X-POS
[7][*]
S17.2
LOGO
Y-POS
[1][*]
S17.3
LOGO
000000
007-01
[1][1][0][1][*]
S17.3
LOGO
000000
001-02
Press[>>]key 6 times
S17.3
LOGO
000000
007-02
[][]
S17.3
LOGO
X-POS
[5][*]
S17.3
LOGO
Y-POS
[*]
S17.3
LOGO
000000
005-02
S17
LOGO
FILE
[PLU]
dots).
Note1: If you want to exit without saving, press [] key follow by [C] key.
95
DISPLAY
PT
kg
/kg
S17.0
LOGO
NO SET
[1]
S17.0
LOGO
NO SET
[]
S17.0
LOGO
DEL ?
Y-C N-T
[C]
S17
LOGO
FILE
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Logo File can not be deleted.
96
REMARK
Enter Logo File programming
mode.
Enter Logo File number 1.
Enter delete mode.
[C] for Yes,[T] for No.
Delete Logo File 1, back to S
mode.
Note: If you want print PRICE WITH TAX on Item Label, the selected label format must has print area for
Price + Tax and SPEC 659: SELECTION OF ITEM PRICE PRINTING must set to ITEM PRICE
AFTER TAX in advance.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
REMARK
Enter S mode.
Enter Tax File programming
[1][8][*]
S18.0
TAX
NO SET
mode.
Enter Tax File number.(Ex. 1)
Enter
default
tax
rate.(Ex.
[1][*]
S18.1
TAX
0.00
INCLUDE
[3][0][0]
S18.1
TAX
3.00
INCLUDE
[<<] or [>>]
S18.1
TAX
3.00
EXCLUDE
S18
TAX
FILE
[PLU]
97
3.00%)
DISPLAY
PT
kg
/kg
S18.0
TAX
NO SET
[1]
S18.0
TAX
NO SET
[]
S18.0
TAX
DEL ?
Y-C N-T
[C]
S18
TAX
FILE
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Tax File can not be deleted.
98
REMARK
Enter Tax File programming
mode.
Enter Tax File number 1.
Enter delete mode.
[C] for Yes,[T] for No.
Delete Tax File 1, back to S
mode.
OPERATION
PT
kg
/kg
S1
PLU
FILE
REMARK
Enter S mode.
Enter Scrolling Message programming
[1][3][*]
S13.0
SC MG
NO SET
mode.
Enter Scrolling Message number.(Ex. 1)
[1][*]
S13.1
SC MG
0
Enter Scroll Message.
[W][E][L][C][O][M][E
S13.1
][SP][T][O]
SC MG
STORE
21
(Ex.
WELCOME
TO
DIGI
STORE)
[PLU]
S13
SCROLL
MESSAGE
DISPLAY
PT
kg
/kg
S13.0
SC MG
NO SET
[1]
S13.0
SC MG
NO SET
[]
S13.0
SC MG
DEL ?
Y-C N-T
[C]
S13
SCROLL
MESSAGE
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Scroll Message File can not be deleted.
99
REMARK
Enter Scrolling Message programming
mode.
Enter Scrolling Message number.(Ex.
1)
Enter delete mode.
[C] for Yes,[T] for No.
Delete Scrolling Message File 1, back
to S mode.
DISPLAY
PT
kg
/kg
S1
PLU
FILE
[1][4][*]
S14.0
SC SQ
NO SET
[1][*]
S14.1
SC SQ
MSG NO
000
[1][2][3][*]
S14.2
SC SQ
ATTRIB
123 000
REMARK
Enter S mode.
Enter
Scrolling
Sequence
programming mode.
Enter Scrolling Sequence file
number.(Ex. 1)
Enter existing Scrolling Message
Number.(Ex. 1, 2, 3)
Select Scrolling pattern for each
[1][2][3][*]
S14.2
SC SQ
SPEED
123 000
Scrolling Message.
(Ex. MSG#1=1, MSG#2=2 &
MSG#3=3)
Select Scrolling Rate.
(Ex.
[1][2][0]
S14.2
SC SQ
SPEED
123 120
MSG#1=1:NORMAL,MSG#2
=2:FAST
and
MSG#3=0:SLOW)
[PLU]
S14
SCROLL
Maximum 25 characters
Maximum 25 characters
100
SEQUENC
[1]
[PLU]
DISPLAY
PT
kg
/kg
S14.0
SC SQ
NO SET
S14.0
SC SQ
NO SET
S14
SCROLL
SEQUENC
REMARK
Enter
Scrolling
Sequence
programming mode.
Enter Scrolling Sequence file
number.(Ex. 1)
Enable
Scrolling
Sequence
Note1: If you want to change the Scroll Sequence number, enter new sequence number follow by press [PLU] key.
[0]
[PLU]
DISPLAY
PT
kg
/kg
S14.0
SC SQ
NO SET
S14.1
SC SQ
NO SET
S14
SCROLL
SEQUENC
101
REMARK
Enter
Scrolling
Sequence
programming mode.
Enter Scrolling Sequence file
number.(Ex. 0)
disable
Scrolling
Sequence
DISPLAY
PT
kg
/kg
S14.0
SC SQ
NO SET
[1]
S14.0
SC SQ
NO SET
[]
S14.0
SC SQ
DEL ?
Y-C N-T
[C]
S14
SCROLL
SEQUENC
Note1: If you want to cancel the deletion, press [T] key to exit.
Note2: Non-existing Scroll Sequence File can not be deleted.
102
REMARK
Enter
Scrolling
Sequence
programming mode.
Enter Scrolling Sequence file
number.(Ex. 1)
Enter delete mode.
[C] for Yes,[T] for No.
Delete
Scrolling
Sequence
A/a
1
B/b
2
C/c
3
D/d
4
E/e
5
F/f
6
G/g
7
H/h
8
I/i
9
J/j
0
K/k
!
L/l
M/m
N/n
$
O/o
%
P/p
^
Q/q
&
R/r
*
S/s
T/t
U/u
:
V/v
=
W/w
"
X/x
/
Y/y
-
Z/z
\
?/?
+
/
?
?/?
<
/
.
?/?
>
?/?
,
?/
ASCII
Display
Indicate
Remarks
INPUT A
Lamp P turns on
*note 1
INPUT a
*note2
INPUT 1
*note3
103
DISPLAY
PT
kg
/kg
S1.3
C01.01
[CODE]
S1.3
C01.01
A-
S1 A 22
[6][7]
S1.3
C01.02
A-
S1 A 21
[6][5]
S1.3
C01.03
A-
S1 A 20
[7][5]
S1.3
C01.04
A-
S1 A 19
[6][9]
S1.3
C01.05
A-
S1 A 18
S1 A 22
REMARK
Code
67
figures
65
figures
75
figures
69
figures
Character C.
ASCII
Code
Character A.
ASCII
Code
Character K.
ASCII
Code
Character E.
Switch to key in method.
[CODE]
S1.3
C01.01
CAKE
S1 A 18
Note1: Decimal digital from 32 to 255 can be entered. Each Decimal digital figures one ASCII Character.
Note2: Different Countries can refer to the local ASCII Code List.
104
4. REGISTRATION MODE
4.1 ON/OFF
1 - ZERO
OPERATION
Power on.
KEYS
PT kg
[ON/OFF]
Kg
2 - NET
$/kg
3 - FIX T
$
4 - FIX P
1
. . . . . . . . . . . . . . . . . .
, , , ,
, , , , , , , , , , , , , , , , , ,
0.0 0 0
Power off.
0.0 0 0
0.0 0
0.0 0
[ON/OFF]
KEYS
PT kg
Stand-by-status.
Reset the zero point.
0.0 0 0
[REZERO]
1 - ZERO
Kg
0.0 0
2 - NET
$/kg
0.0 0
3 - FIX T 4 - FIX P
$
1 2 3 4
0.0 0
105
0.0 0 0
0.0 0
0.0 0
0.0 0
0.0 0 0
1.0 0 0
0.0 0
0.0 0
0.0 1 0
1.0 0 0
1.2 0
1.2 0
0.0 0 0
0.0 0 0
0.0 0
0.0 0
KEYS
PT kg
1 - ZERO
2 - NET
Kg
$/kg
3 - FIX T
$
1
Stand-by-status.
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 3 0
0.0 0
0.0 0
0.0 3 0
0.0 0 0
0.0 0
0.0 0
0.0 3 0 - 0.0 3 0
0.0 0
0.0 0
0.0 0 0
0.0 0 0
0.0 0
0.0 0
1 - ZERO
2 - NET
[T]
[T]
4 - FIX P
2 3 4
KEYS
PT kg
Stand-by-status.
Kg
$/kg
3 - FIX T
$
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0
[5]
0.0 0 0
0.0 0 0
0.0 5
[T]
0.0 0 5 - 0.0 0 5
0.0 0
0.0 0
[T]
0.0 0 0
0.0 0
0.0 0
106
0.0 0 0
4 - FIX P
2
Note: The machine beeps if incorrect operation is performed when during PLU calls up.
KEYS
Stand-by-status
PT kg
1 - ZERO
2 - NET
Kg
$/kg
3 - FIX T 4 - FIX P
$
1 2 3 4
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 0 0
1.00
0.0 0
[PLU]
0.0 0 0
0.0 0 0
1.2 0
0.0 0
[C]
0.0 0 0
0.0 0 0
0.0 0
0.0 0
KEYS
Stand-by-status
Press the Preset key where desired PLU is
PT kg
1 - ZERO
2 - NET
Kg
$/kg
3 - FIX T 4 - FIX P
$
1 2 3 4
0.0 0 0
0.0 0 0
0.0 0
0.0 0
[P1]
0.0 0 0
0.0 0 0
1.2 0
0.0 0
[C]
0.0 0 0
0.0 0 0
0.0 0
0.0 0
assigned.
Clear the PLU and return to Stand-by-status.
KEYS
Stand-by-status
Enter the PLU No. of the Beef steak
PT kg
1 - ZERO
2 - NET
Kg
$/kg
3 - FIX T 4 - FIX P
$
1 2 3 4
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 0 0
0.1 0
0.0 0
BEEF STEAK
[C]
107
0.0 0 0
0.0 0 0
1.20
0.00
0.0 0 0
0.0 0 0
0.0 0
0.0 0
KEYS
PT kg
1 - ZERO
2 - NET
Kg
$/kg
3 - FIX T
4 - FIX P
$
1 2 3 4
Stand-by-status.
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 3 0
0.0 0
0.0 0
[T]
0.0 3 0
0.0 0 0
0.0 0
0.0 0
Fix tare.
[FIX]
0.0 3 0
0.0 0 0
0.0 0
0.0 0
[FIX]
0.0 3 0
0.0 0 0
0.0 0
0.0 0
0.0 3 0
0.0 1 0
0.0 0
0.0 0
[T]
0.0 4 0
0.0 0 0
0.0 0
0.0 0
Fix tare.
[FIX]
0.0 4 0
0.0 0 0
0.0 0
0.0 0
0.0 4 0 - 0.0 4 0
0.0 0
0.0 0
0.0 4 0 - 0.0 4 0
0.5 0
0.0 0
[5] [0]
[T]
0.0 5 0 - 0.0 5 0
0.0 0
0.0 0
Fix tare.
[FIX]
0.0 5 0 - 0.0 5 0
0.0 0
0.0 0
[T]
0.0 0 0
0.0 0
0.0 0
0.0 0 0
KEYS
PT kg
Stand-by-status.
1 - ZERO
2 - NET
Kg
$/kg
3 - FIX T
$
1
0.0 0 0
0.0 0 0
0.0 0
0.0 0
[1] [0]
0.0 0 0
0.0 0 0
0.1 0
0.0 0
[PLU]
0.0 0 0
0.0 0 0
1.2 0
0.0 0
Fix PLU.
[FIX]
0.0 0 0
0.0 0 0
1.2 0
0.0 0
[FIX]
0.0 0 0
0.0 0 0
1.2 0
0.0 0
[1] [0]
0.0 0 0
0.0 0 0
0.1 0
0.0 0
[PLU]
0.0 0 0
0.0 0 0
1.2 0
0.0 0
Fix PLU.
[FIX]
0.0 0 0
0.0 0 0
1.2 0
0.0 0
[2] [0]
0.0 0 0
0.0 0 0
0.2 0
0.0 0
[PLU]
0.0 0 0
0.0 0 0
2.4 0
0.0 0
Fix PLU
[FIX]
0.0 0 0
0.0 0 0
2.4 0
0.0 0
[C]
0.0 0 0
0.0 0 0
0.0 0
0.0 0
4 - FIX P
2 3 4
KEYS
PT kg
Stand-by-status.
1 - ZERO
2 - NET
Kg
$/kg
3 - FIX T
4 - FIX P
$
1 2 3 4
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 0 0
1.0 0
0.0 0
[FIX]
0.0 0 0
0.0 0 0
1.0 0
0.0 0
[FIX]
0.0 0 0
0.0 0 0
1.0 0
0.0 0
0.0 0 0
0.0 0 0
2.0 0
0.0 0
[FIX]
0.0 0 0
0.0 0 0
2.0 0
0.0 0
[C]
0.0 0 0
0.0 0 0
0.0 0
0.0 0
108
KEYS
Receipt mode.
PT kg
0.0 0 0
[REZERO]
[REZERO] key.
[REZERO]+[MODE]
[REZERO] key.
[REZERO]+[MODE]
Kg
0.0 0 0
3 - PREPACK
$/kg
0.0 0
4 - MANUAL
$
1
0.0 0
2 - NET
0.0 0 0
LABEL
MODE
0.0 0
0.0 0
MODE
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 0 0
0.0 0
0.0 0
109
5 - LABEL
3
OPERATION
KEYS
Stand-by-status.
2 - NET
PT kg
3 - FIX T
Kg
$/kg
4 - FIX P
0.0 0 0
0.0 0 0
0.0 0
0.0 0
[1] [0]
0.0 0 0
0.0 0 0
0.1 0
0.0 0
[PLU]
0.0 0 0
0.0 0 0
1.2 0
0.0 0
0.0 0 0
1.0 0 0
1.2 0
1.2 0
5 - MANUAL
[*]
0.0 0 0
1.0 0 0
1.2 0
1.2 0
[C]
0.0 0 0
0.0 0 0
0.0 0
0.0 0
2 3 4
6 - LABEL
For example: Sell one pack of SMOKED SAUSAGE (Ex. PLU #: 30) and sell five packs of
SLICED BACON (Ex. PLU #: 40). (Non-weighing Item)
1 - ZERO
OPERATION
KEYS
Stand-by-status.
2 - NET
PT kg
3 - FIX T
Kg
$/kg
4 - FIX P
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 0 0
0.3 0
0.0 0
2.5 0
PR-PCS
0.0 0 0
0.0 0
1.2 0
0.0 0 0
0.4 0
0.0 0
3.2 0
PR-PCS
QTY 1
3.2 0
3.2 0
QTY 5
3.2 0
1 6.0 0
0.0 0 0
0.0 0
0.0 0
[3] [0]
[PLU]
[*]
0.0 0 0
[4] [0]
0.0 0 0
[PLU]
Multiply.
[X]
5 packs.
[5]
[*]
0.0 0 0
110
5 - MANUAL
2 3 4
6 - LABEL
For example: Enter the Price for Non-PLU item (Ex. 5.00) by numeric key.
Note: For Non-weight Item, just press [*] key to issue out a label or press [X] key to enter multiply
mode, then enter sale quantity and press [*] key to issue label.
1 - ZERO
OPERATION
KEYS
Stand-by-status.
PT kg
2 - NET
3 - FIX T
Kg
4 - FIX P
$/kg
5 - MANUAL
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 0 0
5.0 0
0.0 0
[X]
QTY 1
5.00
5.00
5 packs.
[5]
QTY 5
5.0 0
25.0 0
[*]
0.0 0 0
0.0 0
0.0 0
Multiply.
0.0 0 0
111
2 3 4
6 - LABEL
For example: Sells 1.5 kg of HERB CHEESE(Ex. PLU #: 3) and 2 packs of SKIM MILK(Ex. PLU
# 302) for customer A.
1 - ZERO
OPERATION
KEYS
Stand-by-status.
Enter the PLU No. of the HERB CHEESE
[3][PLU]
Kg
[X][2]
[V1]
[*]
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 0 0
5.0 0
0.0 0
0.0 0 0
1.5 0 0
5.0 0
7.5 0
-V1-
TOTAL
1PCS
7.5 0
0.0 0 0
0.0 0 0
0.0 0
0.0 0
[3][0][2][PLU]
$/kg
3 - V1
0.0 0 0
[V1]
[C]
PT kg
2 - NET
3.0 0 PR-PCS
3.0 0
6.0 0
-V1-
QTY 2
TOTAL
3PCS
13.5 0
0.0 0 0
0.0 0 0
0.0 0
0.0 0
112
4 - V2
1
5 - V3
3
6 - V4
5
KEYS
1 - ZERO
2 - NET
Kg
$/kg
$
PT kg
Stand-by-status.
3 - V1
1
0.0 0 0
0.0 0 0
0.0 0
0.0 0
[1] [0]
0.0 0 0
0.0 0 0
0.1 0
0.0 0
[PLU]
0.0 0 0
0.0 0 0
1.20
0.0 0
0.0 0 0
1.0 0 0
1.20
1.2 0
[V1]
-V1-
TOTAL
1PCS
1.2 0
[P2]
-V1-
DISC
0.00
[2] [0]
-V1-
DISC
0.20
Confirm.
[*]
-V1-
TOTAL
1PCS
1.00
[C]
0.0 0 0
0.0 0 0
0.0 0
0.0 0
4 - V2
5 - V3
6 - V4
2
3
4
5
6
KEYS
Stand-by-status.
PT kg
Kg
2 - NET
3 - V1
$/kg
0.0 0 0
0.0 0 0
0.0 0
0.0 0
[1] [0]
0.0 0 0
0.0 0 0
0.1 0
0.0 0
[PLU]
0.0 0 0
0.0 0 0
1.20
0.0 0
0.0 0 0
1.0 0 0
1.20
1.2 0
[V1]
-V1-
TOTAL
1PCS
1.2 0
[P1]
-V1-
DISC
RATE
0.00
-V1-
DISC
RATE
10.00
Confirm.
[*]
-V1-
TOTAL
1PCS
1.08
[C]
0.0 0 0
0.0 0 0
0.0 0
0.0 0
113
4 - V2
1
5 - V3
3
6 - V4
4 5 6
But customer canceled 5kg of BEEF STEAK accumulated in the last operation.
1 - ZERO
OPERATION
KEYS
Stand-by-status.
Enter the PLU No. of the Beef Sirloin.
[V1]
PT kg
Kg
[V1]
[1] [0] [PLU]
[V1]
[]
[C]
0.0 0
0.0 0
0.0 0 0
0.0 0 0
1.2 0
0.0 0
0.0 0 0
1.0 0 0
1.2 0
1.2 0
-V1- TOTAL
1PCS
1.2 0
0.0 0
0.0 0
2.5 0
PR-PCS
0.0 0 0
-V1- TOTAL
2PCS
3.7 0
0.0 0 0
0.0 0 0
1.2 0
0.0 0
0.0 0 0
5.0 0 0
1.2 0
6.0 0
-V1- TOTAL
3PCS
9.7 0
-V1- TOTAL
2PCS
3.7 0
0.0 0
0.0 0
0.0 0 0
114
0.0 0 0
4 - V2
1
0.0 0 0
Enter the PLU No. of the Smoked Sausage. [3] [0] [PLU]
Enter the PLU No. of the Beef Sirloin.
$/kg
3 - V1
0.0 0 0
0.0 0 0
2 - NET
5 - V3
3
6 - V4
5
But customer canceled One pack of Smoked Sausage in the 2nd transaction.
1 - ZERO
OPERATION
KEYS
PT kg
Stand-by-status.
Enter the PLU No. of the Beef Sirloin.
[V1]
[C]
[V1]
Kg
$/kg
3 - V1
$
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 0 0
1.2 0
0.0 0
0.0 0 0
1.0 0 0
1.2 0
1.2 0
-V1- TOTAL
1PCS
1.2 0
0.0 0 0
0.0 0
0.0 0
-V1- TOTAL
2PCS
3.7 0
0.0 0 0
2.5 0 PR-PCS
2 - NET
[V1]
[C]
0.0 0 0
0.0 0 0
1.2 0
0.0 0
0.0 0 0
5.0 0 0
1.2 0
6.0 0
-V1- TOTAL
0.0 0 0
3PCS
9.7 0
0.0 0 0
0.0 0
0.0 0
[]
VD 1
1PCS
1.2 0
[>>]
VD 2
1PCS
2.5 0
[*]
[V1]
0.0 0 0
[C]
0.0 0 0
0.0 0
0.0 0
-V1- TOTAL
2PCS
7.2 0
0.0 0
0.0 0
0.0 0 0
115
0.0 0 0
4 - V2
1
5 - V3
2
6 - V4
4 5 6
KEYS
Stand-by-status.
2 - NET
PT kg
3 - FIX T
Kg
4 - FIX P
$/kg
5 - PREPACK
0.0 0 0
0.0 0 0
0.0 0
0.0 0
[AUTO]
0.0 0 0
0.0 0 0
0.0 0
0.0 0
[8][PLU]
0.0 0 0
0.0 0 0
2.2 3
0.0 0
0.0 0 0
1.0 0 0
2.2 3
2.2 3
0.0 0 0
0.0 0 0
2.2 3
0.0 0
label off..
Repeat the above 3 and 4 step to weighing the
next pack, until the last packed is weighed.
0.0 0 0
0.0 0 0
0.0 0
0.0 0
6 - LABEL
4
For example: issue 20 labels of SMOKED SAUSAGE (Non-Weighing Item, PLU #30).
1 - ZERO
2 - NET
3 - FIX T
4 - FIX P
KEYS
PT kg
Kg
$/kg
$
OPERATION
Stand-by-status.
0.0 0 0
0.0 0 0
0.0 0
5 - MANUAL
1
2
3
0.0 0
[*]
LABEL NUMBER
[2][0]
LABEL NUMBER
20
[*]
LABEL
COUNT
20
LABEL
COUNT
19
LABEL
COUNT
0.0 0 0
0.0 0
0.0 0
2.5 0 PR-PCS
*Note
0.0 0 0
116
6 - LABEL
4 5 6
For example: At Pre-pack Mode, enter the Price for Non-PLU item (Ex. 5.00) by numeric key.
1 - ZERO
2 - NET
3 - FIX T
4 - FIX P
KEYS
PT kg
Kg
$/kg
$
OPERATION
At Pre-pack Mode
Enter the unit price(Ex.5.00)
[5][0][0]
0.0 0 0
0.0 0 0
0.0 0
0.0 0
0.0 0 0
0.0 0 0
5.0 0
0.0 0
0.0 0 0
1.0 0 0
5.0 0
5.0 0
0.0 0 0
0.0 0 0
2.2 3
0.0 0
0.0 0 0
0.0 0 0
0.0 0
0.0 0
5 - PREPACK
1
2
3
Note1: For Non-weight Item, just press [*] key to start issuing out a label and registered to PLU # 999999.
Note2: For Weighing of Non-PLU Item will be registered to PLU # 999998.
117
6 - LABEL
4
5
6
PRINT LIMIT
For setting the report range, Department Number, Main Group Number or PLU Number to start and
finish is to be entered.
LOWER LIMIT:
UPPER LIMIT:
DISPLAY
REMARK
PT
kg
/kg
0.000
0.000
0.00
0.00
Stand-by Status
[MODE][MODE]
X1.1
READ
MG
DAILY
Enter X mode.
[X]
X2.1
READ
PLU
DAILY
118
119
For example:
MAIN GROUP LOWER LIMIT:
996
DISPLAY
OPERATION
REMARK
PT
kg
/kg
Enter X mode
X1.1
READ
MG
DAILY
[*]
X1.1
ST NUM
[3][*]
X1.1
ED NUM
- REPORT
PRINTING -
[9][9][6][*]
X1.1
READ
MGROUP
DAILY
[] or [] or [X]
X1.4
READ
MG
TERM
[*]
X1.4
ST NUM
[3][*]
X1.4
ED NUM
- REPORT
PRINTING -
MG
TERM
[9][9][6][*]
X1.4
READ
For example:
PLU NUMBER LOWER LIMIT:
999996
OPERATION
DISPLAY
REMARK
PT
kg
/kg
Enter X mode
X1.1
READ
MG
DAILY
[] or [] or [X]
X2.1
READ
PLU
DAILY
[*]
X2.1
ST NUM
[3][*]
X2.1
ED NUM
- REPORT
PRINTING -
[9][9][9][9][9][6][*]
X2.1
READ
PLU
DAILY
[] or [] or [X]
X2.4
READ
PLU
TERM
[*]
X2.4
ST NUM
120
DISPLAY
PT
kg
X2.4
[9][9][9][9][9][6][*]
X2.4
READ
REMARK
/kg
ED NUM
- REPORT
PRINTING -
PLU
PERIOD
For example:
DEPARTMENT LOWER LIMIT: 3
DEPARTMENT UPPER LIMIT:
OPERATION
96
DISPLAY
REMARK
PT
kg
/kg
Enter X mode
X1.1
READ
MG
DAILY
[] or [] or [X]
X3.1
READ
DEPT
DAILY
[*]
X3.1
ST NUM
[3][*]
X3.1
ED NUM
- REPORT
PRINTING -
[9][6][*]
X3.1
READ
DEPT
DAILY
[] or [] or [X]
X3.4
READ
DEPT
TERM
[*]
X3.4
ST NUM
[3][*]
X3.4
ED NUM
- REPORT
PRINTING -
DEPT
TERM
[9][6][*]
X3.4
READ
121
DISPLAY
REMARK
PT
kg
/kg
Enter X mode
X1.1
READ
MG
DAILY
[] or [] or [X]
X4.1
READ
SALES
DAILY
- REPORT
PRINTING -
[*]
[] or [] or [X]
X4.1
READ
SALES
DAILY
X4.4
READ
SALES
TERM
- REPORT
PRINTING -
DEPT
TERM
[*]
X3.4
READ
DISPLAY
REMARK
PT
kg
/kg
Enter X mode
X1.1
READ
MG
DAILY
[] or [] or [X]
X5.1
READ
24 HOUR
DAILY
- REPORT
PRINTING -
[*]
[] or [] or [X]
X5.1
READ
24 HOUR
DAILY
X5.4
READ
24 HOUR
TERM
- REPORT
PRINTING -
24 HOUR
TERM
[*]
X5.4
READ
122
For example: Printing report order for ABC Daily/Term Read Report:
PLU NUMBER LOWER LIMIT:
999
OPERATION
DISPLAY
REMARK
PT
kg
/kg
Enter X mode
X1.1
READ
MG
DAILY
[] or [] or [X]
X6.1
READ
ABC
DAILY
[*]
X6.1
ST NUM
[1][*]
X6.1
ED NUM
- REPORT
PRINTING -
[9][9][9][*]
X6.1
READ
ABC
DAILY
[] or [] or [X]
X6.4
READ
ABC
TERM
[*]
X6.4
ST NUM
[1][*]
X6.4
ED NUM
- REPORT
PRINTING -
ABC
TERM
[9][9][*]
X6.4
READ
For example: Printing report order for CLERK Daily Read Report:
CLERK NUMBER LOWER LIMIT:
OPERATION
DISPLAY
REMARK
PT
kg
/kg
Enter X mode
X1.1
READ
MG
DAILY
[] or [] or [X]
X7.1
READ
CLERK
DAILY
[*]
X7.1
ST NUM
[1][*]
X7.1
ED NUM
- REPORT
PRINTING -
CLERK
DAILY
[4][*]
X7.1
READ
123
For example: Printing report order for PREPACK DEPARTMENT/ MAIN GROUP REPORT:
DEPARTMENT LOWER LIMIT: 1
DEPARTMENT UPPER LIMIT:
99
999
OPERATION
DISPLAY
REMARK
PT
kg
/kg
Enter X mode
X1.1
READ
MG
DAILY
[] or [] or [X]
X8.1
READ
[*]
X8.1
DEPT
ST NUM
[1][*]
X8.1
DEPT
ED NUM
- REPORT
PRINTING -
[9][9][*]
PPK
DEPT
PPK
DAILY
X8.1
READ
[] or [] or [X]
X8.2
READ
PPK MG
DAILY
[*]
X8.2
DEPT
ST NUM
[1][*]
X8.2
DEPT
ED NUM
- REPORT
PRINTING -
PPK MG
DAILY
[9][9][9][*]
X8.2
READ
DEPT
124
DAILY
ending
Dept.
Number.(Ex.999)
Print Pre-pack Main Group Daily
Read Report
Display back to X mode.
DISPLAY
REMARK
PT
kg
/kg
Enter X mode
X1.1
READ
MG
DAILY
[] or [] or [X]
X9.4
READ
TAX
[*]
X9.4
ST NUM
[1][*]
X9.4
ED NUM
- REPORT
PRINTING -
READ
TAX
[3][*]
X9.4
DISPLAY
PT
kg
/kg
Enter X mode
X1.1
READ
MG
DAILY
[] or [] or [X]
X4.3
READ
STORE
SUMMARY
- REPORT
PRINTING -
STORE
SUMMARY
[*]
X4.3
READ
125
REMARK
Lamp X turns on.
Select Store Summarized Daily
Read Report.
Print Store Summarized Daily
Read Report.
Display back to X mode.
DISPLAY
PT
kg
/kg
Z1.0
RESET
SALES
DAILY
[*]
RESET
REPORT
Y-C N-T
[C]
Z1.0
RESET
SALES
DAILY
[] or [] or [X]
Z2.0
RESET
SALES
MONTHLY
[*]
RESET
REPORT
Y-C N-T
[C]
Z2.0
RESET
SALES
MONTHLY
[] or [] or [X]
Z3.0
RESET
SALES
TERM
[*]
RESET
REPORT
Y-C N-T
[C]
Z3.0
RESET
SALES
TERM
Enter Z mode
126
REMARK
Lamp Z turns on.
Enter Reset mode.
[C] for Yes,[T] for No.
Display back to Z mode.
Select
Sales
Monthly
Reset
Report.
Enter Reset mode.
[C] for Yes,[T] for No.
Display back to Z mode.
Select Sales Term Reset Report.
Enter Reset mode.
[C] for Yes,[T] for No.
Display back to Z mode.