You are on page 1of 6

MD.

Shamim
+8801911009528
4C87-2018-2045-477K-055X-403E-9539-**** (*)

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.1
Internal Version: 7, 10, 1, 1
(Nero Express)
Recorder: <TSSTcorp CDDVDW SH-S223F>Version: SB00 - HA 1 TA 0 -
7.10.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CDDVDW SH-S223F >Version: SB00 - HA 1 TA 0 -
7.10.1.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===


DiskPeripheral : SAMSUNG HD252HJ atapi Port 2 ID 0 DMA: On

CdRomPeripheral : TSSTcorp CDDVDW SH-S223F atapi Port 2 ID 1 DMA: On

=== CDRom-Device-Map ===


TSSTcorp CDDVDW SH-S223F J: CdRom0
HUAWEI Mass Storage K: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2035MB (2084628kB)
Free physical memory: 1313MB (1345052kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.1.2010
===== Disc-Copy over image - 1st step : Copy to image ...

10:39:13 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424


LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:39:14 AM #2 Text 0 File SCSIPTICommands.cpp, Line 215


SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

10:39:14 AM #3 Phase 48 File dlgbrnst.cpp, Line 1762


Analyzing disc

10:39:14 AM #4 CDCOPY -1 File CDCopy.cpp, Line 1916


The CD is copyrighted
10:39:21 AM #5 Text 0 File CDCopy.cpp, Line 2132
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 356685 356684 ( 79:17.59)

10:39:21 AM #6 Text 0 File CDCopy.cpp, Line 840


Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 356685 = 356685, data (TRM_DATA_MODE2_FORM1_NOSUB, block size
2048)

10:39:21 AM #7 Text 0 File Burncd.cpp, Line 3508


Turn on Disc-At-Once, using CD-R/RW media

10:39:21 AM #8 Text 0 File DlgWaitCD.cpp, Line 307


Last possible write address on media: 445499 ( 99:01.74)
Last address to be written: 356684 ( 79:17.59)

10:39:21 AM #9 Text 0 File DlgWaitCD.cpp, Line 319


Write in overburning mode: NO (enabled: CD)

10:39:21 AM #10 Text 0 File DlgWaitCD.cpp, Line 493


>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:39:21 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 793


Setup items (after recorder preparation)
0: TRM_DATA_MODE2_FORM1_NOSUB (1 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #0 + 356685 (356685) = #356685/79:15.60
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE2_FORM1_NOSUB, 2048, config 0, wanted index0 0 blocks,
length 356685 blocks [Image Recorder]
--------------------------------------------------------------

10:39:21 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 995


Prepare [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1
Next Trk
1: TRM_DATA_MODE2_FORM1_NOSUB, 2048/0x00, FilePos 0
307200 730798080, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|
_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 356685 | 356685 | 0x00
356685 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:39:21 AM #13 Text 0 File Burncd.cpp, Line 4294


Caching options: cache CDRom or Network-No, small files-No (<64KB)

10:39:21 AM #14 Phase 120 File dlgbrnst.cpp, Line 1762


Creating the image for burning

10:39:21 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721


Verifying disc position of item 0 (not relocatable, no disc pos, no patch
infos, orig at #0): write at #0

10:39:21 AM #16 Text 0 File ThreadedTransfer.cpp, Line 269


Pipe memory size 590400

10:42:26 AM #17 SPTI -1128 File SCSIPassThrough.cpp, Line 179


CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 00 00 05 71 4B 00 00 01 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 05
Buffer x04495940: Len x800

10:42:26 AM #18 Text 0 File TrackPFile.cpp, Line 252


Read error -1128 at address 356683, end of track -> ignore error

10:42:26 AM #19 Text 0 File WriterStatus.cpp, Line 113


<Image Recorder> start writing Lead-Out at LBA 356685 (5714Dh), length 0
blocks

10:42:27 AM #20 Phase 121 File dlgbrnst.cpp, Line 1762


Creating Image completed successfully

10:42:28 AM #21 Text 0 File SCSIPTICommands.cpp, Line 261


SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:42:33 AM #22 Text 0 File SCSIPTICommands.cpp, Line 424


UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:42:33 AM #23 Text 0 File Cdrdrv.cpp, Line 11185


DriveLocker: UnLockVolume completed

===== Disc-Copy over image - 2nd step : Burn the image ...

10:42:33 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424


LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:42:33 AM #2 Text 0 File Burncd.cpp, Line 3196


TSSTcorp CDDVDW SH-S223F
Super Link activated

10:42:33 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366


Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x20
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE2_FORM1_NOSUB'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 730798080
CUES:
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Documents and Settings\Personal\My
Documents\TempImage.nrg>

10:42:33 AM #4 Text 0 File Burncd.cpp, Line 3508


Turn on Disc-At-Once, using CD-R/RW media

10:43:06 AM #5 Text 0 File DlgWaitCD.cpp, Line 307


Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 356684 ( 79:17.59)

10:43:06 AM #6 Text 0 File DlgWaitCD.cpp, Line 319


Write in overburning mode: NO (enabled: CD)

10:43:06 AM #7 Text 0 File DlgWaitCD.cpp, Line 2972


Recorder: TSSTcorp CDDVDW SH-S223F;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B
4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3:
00 80 80 (invalid)

10:43:06 AM #8 Text 0 File DlgWaitCD.cpp, Line 493


>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

10:43:06 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793


Setup items (after recorder preparation)
0: TRM_DATA_MODE2_FORM1_NOSUB (1 - CD-ROM Mode 2/XA, Joliet)
2 indices, index0 (150) provided
original disc pos #0 + 356685 (356685) = #356685/79:15.60
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length
356685 blocks [J: TSSTcorp CDDVDW SH-S223F]
--------------------------------------------------------------

10:43:06 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995


Prepare [J: TSSTcorp CDDVDW SH-S223F] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1
Next Trk
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800
839275920, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|
_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 356685 | 0 | 0x00
356685 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:43:06 AM #11 Text 0 File SCSIPTICommands.cpp, Line 215


SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

10:43:06 AM #12 Text 0 File Burncd.cpp, Line 4294


Caching options: cache CDRom or Network-No, small files-No (<64KB)

10:43:06 AM #13 Phase 36 File dlgbrnst.cpp, Line 1762


Burn process started at 8x (1,200 KB/s)

10:43:06 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2721


Verifying disc position of item 0 (not relocatable, no disc pos, no patch
infos, orig at #0): write at #0

10:43:06 AM #15 Text 0 File MMC.cpp, Line 17697


StartDAO : CD-Text - Off

10:43:06 AM #16 Text 0 File MMC.cpp, Line 22373


Set BUFE: Super Link -> ON

10:43:06 AM #17 Text 0 File MMC.cpp, Line 17925


CueData, Len=32
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 aa 01 34 00 4f 11 3c

10:43:06 AM #18 Text 0 File ThreadedTransfer.cpp, Line 269


Pipe memory size 83836800

10:53:31 AM #19 Text 0 File WriterStatus.cpp, Line 113


<J: TSSTcorp CDDVDW SH-S223F> start writing Lead-Out at LBA 356685 (5714Dh),
length 0 blocks

10:53:48 AM #20 Phase 37 File dlgbrnst.cpp, Line 1762


Burn process completed successfully at 8x (1,200 KB/s)

10:53:49 AM #21 Text 0 File SCSIPTICommands.cpp, Line 261


SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:53:53 AM #22 Text 0 File Cdrdrv.cpp, Line 11185


DriveLocker: UnLockVolume completed

10:53:53 AM #23 Text 0 File SCSIPTICommands.cpp, Line 424


UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0
(Security Option)

You might also like