Professional Documents
Culture Documents
Torlon4203L
polyamide-imide
General
Material Status
Commercial: Active
Availability
Additive
PTFE Lubricant
Features
Uses
Ductile
Fatigue Resistant
Flame Retardant
Good Chemical
Resistance
Aircraft Applications
Automotive Applications
Bushings
Connectors
Europe
Latin America
North America
High Temperature
Electrical Parts
Electrical/Electronic
Applications
Fasteners
Film
Strength
Low Temperature
Toughness
Ultra High Impact
Resistance
Machine/Mechanical Parts
Oil/Gas Applications
Semiconductor Molding
Compounds
Thrust Washer
RoHS Compliance
RoHS Compliant
Automotive Specifications
Forms
Pellets
Processing Method
Injection Molding
Physical
Machining
Typical Value Unit
Specific Gravity
Molding Shrinkage - Flow
1.42
Test method
ASTM D792
0.60 to 0.85 %
ASTM D955
0.33 %
ASTM D570
Profile Extrusion
Test method
4480 MPa
4900 MPa
ASTM D638
ASTM D1708
Tensile Strength1
152 MPa
ASTM D638
Tensile Stress
192 MPa
ASTM D1708
7.6 %
15 %
ASTM D638
ASTM D1708
Tensile Modulus
1
---
Tensile Elongation
1
Break
Break
Revised: 10/22/2014
Page: 1 of 4
Torlon4203L
polyamide-imide
Mechanical
Flexural Modulus
23C
232C
Test method
ASTM D790
5030 MPa
3590 MPa
Flexural Strength
23C
232C
ASTM D790
241 MPa
118 MPa
Compressive Modulus
4000 MPa
ASTM D695
Compressive Strength
221 MPa
ASTM D695
Poisson's Ratio
0.45
ASTM E132
Impact
140 J/m
ASTM D256
1100 J/m
ASTM D4812
Test method
278 C
277 C
ASTM D648
CLTE - Flow
Thermal Conductivity
Electrical
Test method
DSC
3.1E-5 cm/cm/C
ASTM E831
0.26 W/m/K
ASTM C177
Test method
Surface Resistivity
5.0E+18 ohm
ASTM D257
Volume Resistivity
2.0E+17 ohmcm
ASTM D257
Dielectric Strength
23 kV/mm
Dielectric Constant
60 Hz
1 MHz
ASTM D150
4.20
3.90
Dissipation Factor
60 Hz
1 MHz
Injection
ASTM D150
0.026
0.031
Typical Value Unit
Drying Temperature
Drying Time
304 C
371 C
199 to 216 C
Nozzle Temperature
Back Pressure
Screw L/D Ratio
Revised: 10/22/2014
3.0 hr
Rear Temperature
Screw Speed
177 C
0.050 %
Mold Temperature
ASTM D149
6.89 MPa
50 to 100 rpm
18.0:1.0 to 24.0:1.0
Page: 2 of 4
Torlon4203L
polyamide-imide
100C
150C
20
200C
18
16
Stress (MPa)
14
12
10
8
6
4
2
0
-0.05
0.00
0.05
0.10
0.15
0.20
Strain (mm/mm)
2000
370C
1000
Viscosity (Pas)
500
200
100
50
20
100
200
500
1000
2000
5000
10000
20000
50000
Revised: 10/22/2014
Page: 3 of 4
Torlon4203L
polyamide-imide
Notes
Type I
Tg, onset, Solvay method, 2nd heat. Method is equivalent to ISO 11357-2.
SpecialtyPolymers.EMEA@solvay.com
SpecialtyPolymers.Americas@solvay.com
SpecialtyPolymers.Asia@solvay.com
Safety Data Sheets (SDS) are available by emailing us or contacting your sales representative. Always consult the appropriate SDS before using any of
our products.
Neither Solvay Specialty Polymers nor any of its affiliates makes any warranty, express or implied, including merchantability or fitness for use, or accepts
any liability in connection with this product, related information or its use. Some applications of which Solvays products may be proposed to be used
are regulated or restricted by applicable laws and regulations or by national or international standards and in some cases by Solvays recommendation,
including applications of food/feed, water treatment, medical, pharmaceuticals, and personal care. Only products designated as part of the Solviva
family of biomaterials may be considered as candidates for use in implantable medical devices. The user alone must finally determine suitability of any
information or products for any contemplated use in compliance with applicable law, the manner of use and whether any patents are infringed. The
information and the products are for use by technically skilled persons at their own discretion and risk and does not relate to the use of this product in
combination with any other substance or any other process. This is not a license under any patent or other proprietary right.
All trademarks and registered trademarks are property of the companies that comprise the Solvay Group or their respective owners.
2015 Solvay Specialty Polymers. All rights reserved.