Professional Documents
Culture Documents
SIPROTEC 7VK512
Numerical Auto-Reclosure / Synchro-Check Relay
25
LSP2319-afp.tif
79
Fig. 10/48
SIPROTEC 7VK512
numerical auto-reclosure/
synchro-check relay
Function overview
Protection functions
Single and/or three-pole auto-reclosure
Up to 10 auto-reclose cycles
Independently settable dead times
and reclaim time
Evolving and sequential fault
recognition
Synchro-check with live line/dead bus,
dead line/live bus, dead line/dead bus
and synchronism conditions
(live line/live bus)
Asynchronous closing (including CB
operating time)
Circuit-breaker closing supervision,
e.g. circuit-breaker not ready facility
Features
Description
The SIPROTEC 7VK512 is a highly flexible
single and/or three-pole auto-reclosure
relay, with or without a synchro-check
function. The 7VK512 can also be used as a
synchro-check relay only.
This relay is used for the auto-reclosure of
a circuit-breaker, after this circuit-breaker
has tripped due to a fault. The synchrocheck function ensures that the two circuits being reconnected by closing the
circuit-breaker, meet the desired requirements before the close command is issued.
The system interface according to
DIN 19244 is available as a fiber-optic interface for connection to either the substation control system SINAULT LSA or to a
central data protection unit.
10
10/39
Description
Order No.
7VK512-A0o-0A0
1
2
2
4
5
B
C
E
0
1
With
Serial interface (for coupling to SINAULT LSA systems)
Without interface
A
C
With integrated fiber-optic serial interface according to DIN 19244 (820 nm)
Accessories
10
DIGSI 4
Software for configuration and operation of Siemens protection units
running under MS Windows (version Windows 95 and higher)
device templates, Comtrade Viewer, electronic manual included
as well as Getting started manual on paper, connecting cable (copper)
Basis
Full version with license for 10 computers, on CD-ROM
(authorization by serial number)
7XS5400-0AA00
Demo
Demo version on CD-ROM
7XS5401-0AA00
Professional
Complete version:
DIGSI 4 Basis and additionally SIGRA (fault record analysis),
CFC Editor (logic editor), Display Editor (editor for default
and control displays) and DIGSI 4 Remote (remote operation)
7XS5402-0AA00
SIGRA
(generally contained in DIGSI Professional, but can be ordered additionally)
Software for graphic visualization, analysis and evaluation of fault records.
Can also be used for fault records of devices of other manufacturers
(Comtrade format). Running under MS Windows 95/98/ME/NT/2000/
XP Professional Edition.
Incl. templates, electronic manual with license for 10 PCs.
Authorization by serial number. On CD-ROM.
7XS5410-0AA00
Connecting cable
Cable between PC/notebook (9-pin connector)
and protection unit (25-pin connector)
7XV5100-2
or
Cable between PC/notebook (9-pin connector) and protection unit
(9-pin connector)
7XV5100-4
Adaptor 9-/25-pin for 7XV5100-4 cable for protec. unit w. 25-pin connector 7XV5100-8H
(Cable 7XV5100-4 and adaptor contained in DIGSI 4)
Manual for 7VK512
English
10/40
C53000-G1176-C93-5
Connection diagram
10
Fig. 10/49
Connection diagram for 7VK512 numerical
auto-reclosure/synchro-check relay (1 and 3-pole)
10/41
Front view
Side view
Panel cutout
Fig. 16/29
1/3 x 19" housing
for flush mounting or
cubicle mounting
10
Front view
Side view
Detail Z:
Fig. 16/30
1/3 x 19" housing
for panel surface mounting
10/42
10
10/42