Professional Documents
Culture Documents
TECHNOLOGY
Using the latest scientific advances in
tribology, Oiles continually delivers
safe and reliable solutions to the most
complex bearing problems.
Oiles bearing technologies consistently meet the demanding
requirements of today's applications. Oiles understands how
to design products satisfying the most demanding application
requirements including... weight reduction and space saving,
durability, maintainability, serviceability, reduced labor and
other secondary expenses, energy conservation, and minimizing
negative environmental impacts.
Additionally, Oiles routinely designs bearing solutions for some
of the most challenging industries.
Examples include: Automotive, office equipment, transportation
and civil projects, manufacturing equipment, material handling
equipment, hydroelectric and water management, oil and gas,
marine, lumber, construction and agriculture and many more.
CONTENTS
P7
P42
P64
P136
P180
P268
P274
P332
P362
Corporate Profile
Corporate Profile
Technical
Information
Technical Information
Slide Shifter
Air Bearings
Air Bearings
Metallic Bearing
Metallic Bearings
Dimensions
Multi-layer Bearing
Multi-layer Bearings
Dimensions
Plastic Bearing
Product
Information
Product Information
Selection Guide
Selection Guide
Under the world-class quality control and environment protection systems, Oiles Corporation aims to
provide high-quality products and protect the global environment.
February 1998 Acquired ISO 9001 quality management system certification (JSAQ 239): Bearing Division.
August 1998 Acquired ISO 9001 quality management system certification (JSAQ 329): Vibration Isolation and Control
Device Division.
March 2000 Acquired ISO 14001 environmental management system certification (JSAE 213): Shiga Plant.
October 2000 Acquired ISO 14001 environmental management system certification (JSAE 277): Ashikaga Plant.
February 2001 Acquired ISO 14001 environmental management system certification (JSAE 342): Oita Plant.
March 2001 Acquired ISO 14001 environmental management system certification (JSAE 363): Fujisawa Plant.
ACTIONS FOR
ENVIRONMENTAL LOAD
SUBSTANCES
Lead free: Oiles Corporation is committed to developing ecofriendly and safe products. Oiles is proud to advertise complete
lead-free product solutions which, in many instances, can
outperform traditional leaded products. Our commitment to
self-lubricated materials and engineering lasting over halfa-century give Oiles the confidence our products provide
solutions to complex environmental challenges.
R o H S : A l l O i l e s R o H S co m p l i a n t p ro d u c t s
do not exceed the threshold limitations for
the targeted materials including Pb, Hg, Cd,
Cr +6 , PBB, and PBDE.
Lead
Le
ead
a
Pb
Mercury
Cadmium
Hg
Cd
6substances
restricted by the
RoHS directive
Cr+6
PBDE
Hexavalent
chromium
Poly-brominated
diphenyl ether
PBB
Poly-brominated biphenyl
RoHS directive: Directive for restrictions on the use of certain hazardous
substances in electrical and electronic equipment
The RoHS directive restricts the use of certain hazardous chemical substances in electrical
and electronic equipment in the European Union (EU). The intent of the directive is to
minimize environmental pollution and hazardous influences on the human body during
the service life of products from manufacturing to disposal and disposition. Since July
2006, the RoHS directive prohibits products containing certain hazardous chemical
substances over certain levels from being sold in all EU countries.
Selection Guide
Oiles Bearings
Oiles Bearings
Types of Bearings
Bearings
Plain Bearings
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Oiles Bearings
Characteristics
Roller Bearings
Normal Plain
Bearings
Oiles Bearings
to lubricationSelf-lubricating Applicable
free operations.
Roller Bearings
Requires lubrication.
Requires lubrication
normally.
Impact resistance
Superior
Slightly better
Inferior
Heat resistance
Applicable to high
temperature.
Reciprocating motion
Superior
A little inferior
A little inferior
Oscillating motion
Superior
Slightly better
A little inferior
Corrosion resistance
Superior
A little inferior
Inferior
Size
Ball bearings
Roller bearings
Needle bearings
Plastic bearings
Metallic bearings
Metallic Bearing
Oiles bearings feature self-lubricating functions and demonstrate high performance, which normal plain
bearings cannot provide, for fluid lubrication, boundary lubrication, and dry friction fields.
Multi-layer Bearing
Plastic Bearing
Product
Information
Major types
Selection Guide
Roller Bearings
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
8
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Oiles Bearings
Oiles Bearings
Plastic Bearings
Advantages
No requirement of a lubricating system,
lubrication holes, or oil grooves
Remarkable cost reduction by cost and labor associated with
lubrication, machining and assembly.
Multi-layer Bearings
Metallic Bearing
Maintenance free
Significantly reduces costs for lubrication and maintenance of
lubricating system and eliminates problems caused by improper
lubrication.
Air Bearings
Metallic Bearings
Slide Shifter
Corporate Profile
Technical
Information
Air Bearings
Slide Shifters
Plastic
P.131
Multi-layered
Drymet ST
Drymet LF
LF Guides
Techmet B/E
Toughmet
Toughmet D
P.137
P.147
P.160
P.162
P.166
P.169
Composite
P.175
500SP1
500SP4
500SP5
500SPR
500HP
500AB
500B
500F
500 Spherical
P.181
P.205
P.206
P.207
P.209
P.211
P.213
P.217
P.223
2000
2000S
Shoe Units
Cermet M
Cermet G
P.225
P.243
P.241
P.245
P.251
Embedded
Solid lubricants
Dispersed
Slide Shifters,
Guide units
Oil impregnated
P.255
Additive containing
P.265
Air Bearings
P.268
Guide rail type
Guide rail type
Guide shaft type
Guide shaft type
Guide shaft type
Unit type
Guide unit bearings
Guide unit bearings
P.275
P.279
P.289
P.295
P.299
P.311
P.315
P.319
Corporate Profile
S type
SE type
BA type
BC type
BF type
BTU type
500 Guide Units BK type
500 Guide Units BT type
Technical
Information
Air Bearings
Slide Shifter
Composite
Air Bearings
P.127
P.129
P.130
Metallic Bearing
Multi-layer Bearing
Multi-layered
Plastic Bearing
P.121
P.123
Multi-layer
Metallic
P.65
P.76
P.79
P.81
P.83
P.44
P.87
P.89
P.91
P.93
P.95
P.96
P.97
P.99
P.105
P.105
P.113
P.115
Fiber-reinforced
Thermosetting plastic
Product
Information
Thermoplastic
80
Pillow 80
PS Bearings
Lutech S
Lutech E
Lutech AT
Lutech GP
480
81
83
88
88 Elastomer
88-03
Glitron F
Glitron S
Glitron SE
50
Aramid M/F1
Selection Guide
10
Selection Guide
OILES BEARINGS
Die components
for Plastic Mold
English
Japanese
Thai (language)
Vietnamese (language)
15.9.14 9:25:03 AM
English
Japanese
English
Japanese
Brochure
for Hydro power and Gates
Applications
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
11
English
Thai (language)
Vietnamese (language)
English
NEW PRODUCT
Selection Guide
OILES FIBERFLON OH
This product is registered in the New Technology Information System (NETIS) managed by MLIT.
FEATURES
Use Environment
Large bearing
Manufacturing / delivery example
Plastic Bearing
Product
Information
Technology name: Solid-lubricant dispersed bearing FIBERFLON OH/Registration No.: KT-130060-A (for water gates/underwater pumps)
Other
Air Bearings
APPLICATIONS
Metallic Bearing
Multi-layer Bearing
Thanks to the dual structure of the sliding layer and backing material (FRP: glass ber),
this product oers load bearing characteristics equivalent to those of metal bearings.
Slide Shifter
Water Gate
Roller gate (Roller & sheave)
Technical
Information
Corporate Profile
12
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
13
Facilities that
cannot be lubricated
for reasons of
environmental
protection
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
Automobiles, factory
automation machines, and food
machinery, which should be
used under maintenance-free
conditions without the need for
lubrication for long periods
14
Impact
resistant
Plastic
Metallic
250 (425)
500SP
500AB
P.121P.123
P.181
P.211
Conductive
plastic
Conforms to the
Food Sanitation
Act of Japan
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
15
Plastic
Glitron SE
Glitron F
Lutech E
Techmet E
Hiplast E
P.105
P.99
P.83
P.165
P.175
Plastic
Glitron S Glitron SE Glitron F
P.105
Chemicalresistant
Multi-layer
P.105
P.99
81-20
80
Fiberflon FW
88-02
88-03
P.91
P.65
P.127
P.95
P.97
Multilayer
Plastic
P.99
P.127
P.121P.123
P.105
P.115
P.175
Metallic
500SP
500B
P.181
P.213
Plastic
Multi-layer
Selection Guide
Hightemperatureresistant
Metallic
500F
500SP
P.211
P.217
P.181
Product
Information
500AB
P.147
480
Metallic
on Fiberflon 470-02
Glitron F Glitron S Glitron SE Fiberfl
TR
OH
P.99
P.105
P.105
P.129
P.130
P.131
Multilayer
Plastic
500SPSL4 500ABSL4
425
P.123
P.181
P.211
Metallic
Lutech S
Techmet B
2000S
Cermet M
P.105
P.105
P.81
P.162
P.243
P.245
ZERO
Hiplast N
P.175
Corporate Profile
P.105
Multi-layer
Technical
Information
Glitron SE
For zero
clearance
Slide Shifter
Glitron SE
Air Bearings
Glitron S
Plastic
Metallic Bearing
For
replacing
ball bearing
P.166
Plastic
P.89
For highspeed
applications
P.105
Multi-layer Bearing
Usable in
water
P.105
Plastic Bearing
P.99
16
Contaminated
environment
Plastic
Metallic
470-02
83
250 (425)
480
500SP
500AB
P.131
P.93
P.121P.123
P.89
P.181
P.211
Suitable to
micro-motion
For rough
running surface
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
17
Plastic
mating
material
Plastic
Plastic
Multi-layer
Fiberflon
FW
Fiberflon
TR
P.127
P.129
Metallic
P.130
P.166
P.162
Plastic
P.251
P.245
2000
P.225
Metallic
470-02
83
480
500SP
500AB
P.131
P.93
P.89
P.181
P.211
Plastic
Lutech GP
P.87
Plastic
Multi-layer
Glitron SE
88-03
Techmet E
P.105
P.105
P.97
P.165
Product
Information
Glitron S
Selection Guide
Soft metal
shafts
Metallic
80FL
80UP
500SPS
P.77
P.78
P.223
Lutech E-02(LEDLES)
PST
Glitron F
Skiving Sheet
P85,P86
P.79
P.103
Metallic Bearing
Plastic
Air Bearings
Easy to
mount
Plastic
Multi-layer Bearing
Self-aligning
application
Plastic Bearing
Soft metal
Slide Shifter
Technical
Information
Corporate Profile
18
Autom
obile
Bicycl
es
Const
ructio
n mac
hinery
Train
cars
Dam/
Wate
r gate
s
Audio
visual
equipm
ents
Struct
Produ
ct
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
19
Mate
rial
ure
Selection Guide
Application Chart
80
solid
oil-impregnated polyacetal
Pillow 80
unit
PS bearings
unit
Lutech S
solid
Lutech E
solid
Lutech AT
solid
Lutech GP
solid
480
solid
81
solid
oil-impregnated polyolefine
83
solid
88
solid
oil-impregnated polyester
88-03
solid
88 elastomer
solid
polyester elastomer
Glitron F
solid
Glitron S
solid
Glitron SE
solid
50
solid
polyurethan
Aramid M/F1
solid
aromatic polyamide
250
solid
phenol resin
425
solid
phenol resin
Fiberflon FW
solid
multi-layer PTFE
Fiberflon TR
solid
multi-layer PTFE
Fiberflon OH
solid
multi-layer PTFE
470
solid
Drymet ST
Drymet LF
w/ back metal
multi-layer PTFE
Techmet B/E
w/ back metal
multi-layer PTFE
Toughmet
w/ back metal
Toughmet D
w/ back metal
Hiplast N/E
w/ metallic mesh
multi-layer PTFE
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Plastic Bearing
Metallic Bearing
Multi-layer Bearing
aplian
ces
Medica
l/Healt
h equip
ments
Office
autom
ation
Moto
r
House
equip
ments
Office
furnit
ure
Comp
resso
rs
Water t
urbine/
Water t
reatmen
Hydra
t
ulic eq
uipme
nts
Valve
s
Semic
on de
vices
Indus
trial r
obots
Farm
mach
ines
Mach
ine to
ol
Textil
e mac
hine
Food
mach
ine
Packa
ging m
achin
e
Amus
emen
t mac
hine
Trans
forme
r
Custom-made Products
Product
Information
Material Products
Selection Guide
Home
Standard Products
Aramide M
20
Autom
obile
Const
ructio
n mac
hinery
Train
cars
Die co
mpon
ents
Dam/
Wate
r gate
s
Steel p
lant m
achine
Struct
Produ
ct
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
21
Mate
rial
ure
Metallic/Slide Shifter
Selection Guide
Application Chart
500SP1
solid
500SP5
solid
500SPR
solid
500HP
solid
500AB
solid
500B
solid
500F
solid
2000
solid
Cermet M
solid
Cermet G
solid
300
solid
600
solid
wear-resistant copper
Slide Shifter
unit
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
lity
Tower
link
Printi
ng ma
chine
Medica
l/Healt
h equip
ments
Water t
urbine/
Water t
reatmen
t
Excav
ator
Plastic
moldin
g mach
ine
Hydra
ulic eq
uipme
nts
Valve
s
Semic
on de
vices
Indus
trial r
obots
Farm
mach
ines
Mach
ine to
ol
Textil
e mac
hine
Food
mach
ine
Packa
ging m
achin
e
Genera
l indust
rial mac
hinery
Amus
emen
t mac
hine
Custom-made Products
Product
Information
Material Products
Selection Guide
Furna
ce fac
i
Standard Products
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
22
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Selection Guide
Allowable Pressure P (under high load applications) N/mm2
0
Fiberflon FW
Fiberflon TR
Fiberflon OH
480
83-90
80
88-71
88-02
Glitron S
Glitron SE
83-24
88-03
Lutech E
Lutech GP
Glitron F
Lutech S
81-12
81-20
25
Glitron S
Glitron SE
88-03
Glitron F
Lutech S
80
88-02/-71
Lutech E
Lutech GP
480
81-20
83-24/-90
81-12
Fiberflon FW
Fiberflon TR
Fiberflon OH
Scope of ApplicationThe value shown below is obtained in shaft rotation condition in the atmosphere.
Allowable max pressure P Allowable max velocity V Allowable max PV value
Temperature range
Product
Product Name
Oiles
Air Bearings
N/mm2
kgf/cm2
m/s
m/min
N/mm2m/s
kgf/cm2m/min
17.5
0.85
2.45
179
51
1,500
40 80
40 176
Oiles
Slide Shifter
Pillow 80
PS bearings
Oiles
Lutech S
Oiles
Lutech E
Conductive
0.40
24
2.0
21
Allowable pressure
Oiles
Technical
Information
Corporate Profile
50
100
100
80
23
Continuous operation
Nkgf
11,700 49,000
1,194 5,000
Intermittent operation
0.50
306
Continuous operation
0.25
0.30
15
184
Allowable rotation N
1
s
rpm
4.00 1.50
240 90
1
Ns
kgfrpm
1,470 2,450
9,000 15,000
5.0
1.65
2.45
51
99
1,500
9.81
0.83
0.327
100
50
200
Lead free
20 60
4 140
40 80
40 176
40 80
40 176
40 80
40 176
PLASTIC BEARINGS
200
100
100
200
Glitron F
Glitron S
Glitron SE
83-24/-90
88-02
88-71
480
Fiberflon FW
Fiberflon TR
Fiberflon OH
88-03
80
Lutech S
Lutech E
Lutech GP
81-12/-20
Plastic Bearing
Product
Information
480
80
Lutech S
83-90
88-02/-71
Fiberflon FW
Fiberflon TR
Fiberflon OH
83-24
Glitron F
81-12/-20
Glitron S
Glitron SE
Lutech E
Lutech GP
88-03
Selection Guide
These graphs show the standard characteristics of bearings that can be used under self-lubricating conditions.
The values stated below are the product of testing in accordance with Oiles standard test methods.
Please contact a sales representative to discuss applications with conditions outside those listed here.
Conditions vary greatly by application. Please use these values only as guidelines.
P.43
P.65
P.67
P.69
P.71
P.73
P.75
P.77
P.78
PS bearings PST
(plastic thrust bearing units)
P.43
P.79
P.80
Custom-made
P.44
P.81
P.44
P.83
P.85
P.86
Dry
Dry
usable
usable under some condition unusable N/A, For detail, please refer to page 355.
Corporate Profile
P.76
Technical
Information
P.43
Slide Shifter
Air Bearings
80 Bushings 80B
Flange bushings 80F
Washers 80W
Bar stock 80M
Plate materialPipe stock 80P80S
Dry
Metallic Bearing
Corrosive
Lubrication Atmosphere In water In seawater In chemical condition
Multi-layer Bearing
Caution
24
Scope of ApplicationThe value shown below is obtained in shaft rotation condition in the atmosphere.
Allowable max pressure P Allowable max velocity V Allowable max PV value
Temperature range
Product
Product Name
Oiles
Product
Information
Selection Guide
Selection Guide
Lutech AT
N/mm2
kgf/cm2
Plastic Bearing
Multi-layer Bearing
Lutech GP
Metallic Bearing
0.163
100
Mating material: metal
9.81
0.67
0.327
100
40
200
0.65
3.25
480
1,990
81-20
Oiles
83-24
Oiles
Oiles
88-02
Oiles
88-71
Oiles
Technical
Information
Oiles
Corporate Profile
88-03
Oiles
88 elastomer
Glitron F
39
Oiles
Air Bearings
0.33
20
19.5
81-12
Slide Shifter
199
83-90
25
3.92
40
Oiles
Oiles
Conductive
N/mm2m/s
kgf/cm2m/min
Oiles
m/s
m/min
5.0
0.25
51
15
3.0
0.50
31
30
0.80
489
10.0
1.00
102
612
19.5
0.35
21
199
2.45
17.5
40 120
40 248
60 60
76 140
40 140
40 284
1,500
14.5
148
40 80
40 176
0.85
2.45
51
1,500
179
9.81
1.67
0.327
100
100
200
40 140
40 284
40 140
40 284
40 120
40 248
7.0
1.65
1.00
71
99
612
Lead free
200 200
328 392
PLASTIC BEARINGS
Dry
P.44
Custom-made
P.45
P.87
P.45
P.89
P.90
Custom-made
P.45
P.91
83 Washers 83W
P.46
P.93
P.72
Custom-made
P.46
P.95
Dry
Dry
Metallic Bearing
Custom-made
Multi-layer Bearing
Dry
Plastic Bearing
Product
Information
Dry
Selection Guide
Corrosive
Lubrication Atmosphere In water In seawater In chemical condition
Dry
Air Bearings
P.47
P.97
P.98
Custom-made
P.46
P.96
P.99
P.101
P.102
P.103
P.104
P.103
Dry
usable
usable under some condition unusable N/A, For detail, please refer to page 355.
P.47
Corporate Profile
Technical
Information
Slide Shifter
Dry
26
Scope of Application The value shown below are obtained in shaft rotation condition in the atmosphere.
Allowable max pressure P Allowable max velocity V Allowable max PV value
Temperature range
Product
Product Name
Oiles
Product
Information
Selection Guide
Selection Guide
Glitron S
Plastic Bearing
Oiles
Glitron SE
Oiles
Multi-layer Bearing
(Aramid M)
Oiles
Metallic Bearing
Aramid M/F1
Oiles
Air Bearings
250
14.5
2.50
0.65
148
150
398
14.5
2.50
0.65
148
150
398
60 200
76 392
60 200
76 392
20
204
Periodic lubrication
Periodic lubrication
3.35
201
1,500
oil lubrication
2.45
oil lubrication
15
3.25
900
1,990
15
15
4.90
425
153
900
3,000
Fiberflon FW
Slide Shifter
N/mm2m/s
kgf/cm2m/min
Oiles
Oiles
Oiles
Fiberflon TR
Technical
Information
m/s
m/min
50
100
0.15
1.20
1,020
734
100
0.15
1.20
1,020
734
40 100
40 212
room
temperature
40 120
40 248
40 120
40 248
49
Oiles
Corporate Profile
Fiberflon OH
500
100
1,020
0.15
1.20
734
40 120
40 248
Oiles
470-02
Oiles
470-02W
27
N/mm2
kgf/cm2
Conductive
15
16.5
8.15
153
990
4,990
40 90
40 194
Lead free Static bearing pressures defined: Bearing pressures in applications with no motion or very small motion ( 0.0017m/s[0.1m/min]).
PLASTIC BEARINGS
Custom-made
Custom-made
AMMAMS
AMDAMP
ABG
AF1MAF1D
P.48
P.105
P.109
P.110
P.111
P.112
P.48
P.113
P.48
P.115
P.116
P.49
P.121
250-07425-07
P.125
oil
lubrication
P.117
P.118
P.119
P.120
P.126
Air Bearings
P.123
P.49
P.127
P.128
Custom-made
P.50
P.129
Custom-made
P.50
P.130
Custom-made
470-02 Split bearing for flocculator 47H
Flocculator bearing units UPF
P.50
P.131
P.133
P.134
Dry
Dry
Dry
In water
Technical
Information
Slide Shifter
P.49
In water
Metallic Bearing
Periodic
lubrication
DiskPlate material
Balls
Aramid F1 Bar stockDisks
P.105
Multi-layer Bearing
P.47
Plastic Bearing
Dry
Product
Information
Dry
Selection Guide
Corrosive
Lubrication Atmosphere In water In seawater In chemical condition
usable under some condition unusable N/A, For detail, please refer to page 355.
Corporate Profile
usable
28
Selection Guide
Selection Guide
Allowable Pressure P (under high load applications) N/mm2
25
50
Drymet LF
Techmet B
Hiplast
Drymet ST
Drymet ST
Drymet LF
Toughmet
Toughmet
Techmet B
Hiplast
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Scope of ApplicationThe value shown below are obtained in shaft rotation condition in the atmosphere.
Allowable max pressure P Allowable max velocity V Allowable max PV value Temperature range
Product
Product Name
N/mm2
m/s
kgf/cm2
m/min
N/mm2m/s
kgf/cm2m/min
24.5
Oiles
Drymet ST
250
137
1.15
3.25
69
1,990
40 120
40 248
Air Bearings
1,400
49.0
Oiles
Drymet LF
500
137
1,400
0.65
3.60
39
2,200
200 280
328 536
Slide Shifter
Allowable weight W
kgf
N
Oiles
LF Guides
24 135
static 706 3,969
72 405
0.67
3.60
40
2,200
30 130
22 266
Technical
Information
Oiles
Corporate Profile
19.5
Oiles
Techmet B
199
137
2.50
1.45
150
887
50 250
58 482
1,400
49
29
Techmet E
500
137
1,400
0.5
3.27
30
2000
Static bearing pressures defined: Bearing pressures in applications with no motion or very small motion ( 0.0017m/s[0.1m/min]).
Conductive
Lead free
50 250
58 482
MULTI-LAYER BEARINGS
200
Drymet LF
Drymet ST
Toughmet
Toughmet
Hiplast
Hiplast
Techmet
Techmet
Drymet ST
100
200
300
400
Product
Information
Drymet LF
100
LFB
LFF
LFW
LFP
LFCF
P.137
P.141
P.145
P.146
P.51
P.147
P.151
P.155
P.157
P.159
P.158
P.51
LF Guides LFG
P.51
P.160
P.161
Custom-made
Techmet Bushings TCB
P.52
P.162
P.164
Custom-made
P.52
P.165
Dry
Dry
Dry
usable under some condition unusable N/A, For detail, please refer to page 355.
Corporate Profile
Technical
Information
Dry
Slide Shifter
Bushings
Flange bushings
Washers
Plates
Drymet LFt0.5Flange bushings
Air Bearings
Drymet LF
usable
Metallic Bearing
Dry
Corrosive
In water In seawater In chemical condition
Multi-layer Bearing
The allowable values shown below are obtained when tested in the standard bearing test methods of
Oiles Corporation. Please contact us when you use products under conditions over the allowable values.
Conditions differ with machines. Consider that these values are for reference only.
Plastic Bearing
These graphs show the standard characteristics of bearings that can be used under self-lubricating conditions.
Caution
Selection Guide
30
Selection Guide
Selection Guide
Scope of ApplicationThe value shown below are obtained in shaft rotation condition in the atmosphere.
Allowable max pressure P Allowable max velocity V Allowable max PV value Temperature range
Product
Product Name
N/mm2
kgf/cm2
m/s
m/min
N/mm2m/s
kgf/cm2m/min
24.5
Product
Information
Oiles
Toughmet
Plastic Bearing
Oiles
Toughmet D
50
510
100
1,020
Hiplast N
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
49
0.40
1.65
24
1,010
40 350
40 662
500
Oiles
31
250
Oiles
Hiplast E
49.0
0.35
1.65
500
21
1,010
49.0
0.35
1.65
500
21
1,010
Static bearing pressures defined: Bearing pressures in applications with no motion or very small motion ( 0.0017m/s[0.1m/min]).
Conductive
Lead free
50 250
58 482
50 250
58 482
MULTI-LAYER BEARINGS
P.166
P.167
P.52
P.169
P.171
P.173
P.53
P.175
P.178
Custom-made
P.53
P.175
Dry
Dry
Periodic
lubrication
Oil
lubrication
Metallic Bearing
usable under some condition unusable N/A, For detail, please refer to page 355.
Multi-layer Bearing
P.52
Plastic Bearing
usable
Product
Information
Dry
Corrosive
In water In seawater In chemical condition
Selection Guide
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
32
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Selection Guide
Allowable Pressure P (under high load applications) N/mm2
0
50
100
500SPR-SL1
500HP-SL1
500SP1-SL4
500SP4-SL4
500SP5-SL1
500 spherical bearing
500AB-SL4
500SP1-SL1
500SP4-SL1
2000S
2000
500SP1-SL2
500AB-SL1
500B-SL2
Cermet M
Cermet G
500F-SL1
0.5
2000S
Cermet M
500SP1-SL1
500SP4-SL1
2000
Cermet G
500B-SL2
500SP1-SL2
500SP5-SL1
500SPR-SL1
500AB-SL4
500SP1-SL4
500SP4-SL4
500AB-SL1
500F-SL1
500 spherical bearing
500HP-SL1
Scope of ApplicationThe value shown below are obtained in shaft rotation condition in the atmosphere.
Allowable max pressure P Allowable max velocity V Allowable max PV value Temperature range
Product
Product Name
Oiles
500SP1-SL1
N/mm2
m/s
kgf/cm2
m/min
29
296
150
Dry
Air Bearings
Oiles
500SP1-SL2
150
1,530
Dry
0.50
30
Periodic lubrication
1.65
1,010
Periodic lubrication
1.00
60
1,530
24
245
N/mm2m/s
kgf/cm2m/min
Dry
3.25
1,990
Dry
0.25
15
Periodic lubrication
0.80
490
Periodic lubrication
0.50
30
1.65
1,010
40 300
40 572
40 150
40 302
40 300
40 572
40 150
40 302
Slide Shifter
49
Oiles
500SP1-SL4
500
150
0.25
1.65
15
1,010
40 80
40 176
Technical
Information
Oiles
Corporate Profile
1,530
Oiles
500SP4-SL1
29
296
150
1,530
Dry
Dry
0.50
30
Periodic lubrication
1.65
1,010
Periodic lubrication
1.00
60
3.25
1,990
40 300
40 572
40 150
40 302
49
33
500SP4-SL4
500
150
0.25
1.65
15
1,010
1,530
Static bearing pressures defined: Bearing pressures in applications with no motion or very small motion ( 0.0017m/s[0.1m/min]).
Lead free
40 80
40 176
METALLIC BEARINGS
0.5
1.5
500SP1-SL1
500SP4-SL4
500SP5-SL1
500SPR-SL1
500HP-SL1
Cermet M
500SP1-SL4
500SP4-SL4
500AB-SL4
2000
2000S
500AB-SL1
500B-SL2
Cermet G
500SP1-SL2
500 spherical bearing
500F-SL1
Product
Information
500AB-SL1
500F-SL1
500SP1-SL1
500SP4-SL1
500SP1-SL2
500B-SL2
Cermet G
Cermet M
500SP5-SL1
500SPR-SL1
500HP-SL1
500 spherical bearing
2000
2000S
500SP1-SL4
500SP4-SL4
500AB-SL4
Plastic Bearing
The allowable values shown below are obtained when tested in the standard bearing test methods of
Oiles Corporation. Please contact us when you use products under conditions over the allowable values.
Conditions differ with machines. Consider that these values are for reference only.
Dry
Dry
Dry
Dry
Dry
usable
P.181
Custom-made
P.54
P.181
P.54
P.181
P.187
Custom-made
P.54
P.205
Custom-made
P.54
P.205
usable under some condition unusable N/A, For detail, please refer to page 356.
Corporate Profile
Periodic
lubrication
P.54
P.183
P.189
P.191
P.193
P.195
P.197
P.199
P.201
P.203
Technical
Information
Slide Shifter
Periodic
lubrication
Air Bearings
Periodic
lubrication
Metallic Bearing
Corrosive
Lubrication Atmosphere In water In seawater In chemical condition
Multi-layer Bearing
These graphs show the standard characteristics of bearings that can be used under self-lubricating conditions.
Above termperature range includes the range which is not responded by standard grade.
Caution
Selection Guide
34
Scope of ApplicationThe value shown below are obtained in shaft rotation condition in the atmosphere.
Allowable max pressure P Allowable max velocity V Allowable max PV value Temperature range
Product
Product Name
N/mm2
kgf/cm2
49
500
Oiles
Product
Information
Selection Guide
Selection Guide
500SP5 -SL1
m/s
m/min
Dry
1,735
Plastic Bearing
Oiles
500SPR-SL1
3.25
1,990
Oiles
Multi-layer Bearing
500HP-SL1
24
245
Oiles
Metallic Bearing
500AB-SL1
3.25
1,990
1.65
1,010
Periodic lubrication
0.25
3.25
15
1,990
Dry
Dry
0.25
15
1.25
765
Periodic lubrication
0.50
30
1,020
40 150
Dry
0.10
6
Periodic lubrication
100
Periodic lubrication
0.50
Periodic lubrication
180
1.65
1,010
30
Dry
1,837
40 150
40 302
Dry
0.25
15
2,041
73
745
Periodic lubrication
0.50
Periodic lubrication
200
1.65
1,010
30
Dry
90
918
Dry
0.25
15
Periodic lubrication
170
N/mm2m/s
kgf/cm2m/min
2.45
1,500
40 150
40 302
250 400
418 752
40 150
40 302
34
347
Oiles
500AB-SL4
100
0.25
1.65
15
1,010
40 80
40 176
Air Bearings
1,020
15
153
Oiles
500B-SL2
Dry
Dry
0.40
24
Periodic lubrication
49.0
500
1.00
612
Periodic lubrication
0.85
51
1.65
1,010
40 250
40 482
40 150
40 302
Corporate Profile
Technical
Information
Slide Shifter
Static bearing pressures defined: Bearing pressures in applications with no motion or very small motion ( 0.0017m/s[0.1m/min]).
35
Lead free
Material
Application
500SP1
500SP4
500SP5
500SPR
500HP
500F
500B1
500B2
500AB
cast iron
bronze cast
bronze cast
aluminum bronze
METALLIC BEARINGS
Dry
Dry
Dry
Dry
Dry
Dry
P.55
P.207
P.55
P.209
P.210
Custom-made
P.55
P.211
Custom-made
P.55
P.211
P.56
P.213
P.215
usable under some condition unusable N/A, For detail, please refer to page 356.
Temperature
range F
SL101
general use
SL103
high temp.
SL202
SL464
grease
coating
40 150
40 302
250 400
418 752
SL-2
250
SL-2
SL-2
SL-464
Corporate Profile
SL201
Additional lubricant
Technical
Information
Type
Slide Shifter
usable
Custom-made
Air Bearings
Metallic Bearing
Periodic
lubrication
P.206
Multi-layer Bearing
Periodic
lubrication
P.54
Plastic Bearing
Periodic
lubrication
Custom-made
Product
Information
Periodic
lubrication
Periodic
lubrication
Selection Guide
Corrosive
Lubrication Atmosphere In water In seawater In chemical condition
36
Selection Guide
Selection Guide
Scope of ApplicationThe value shown below are obtained in shaft rotation condition in the atmosphere.
Allowable max pressure P Allowable max velocity V Allowable max PV value Temperature range
Product
N/mm2
kgf/cm2
Product Name
Dry
Product
Information
Oiles
500F-SL1
Plastic Bearing
Dry
5 73.5
51
750
Periodic lubrication
8 73.5
82
750
Oiles
Multi-layer Bearing
2000
N/mm2m/s
kgf/cm2m/min
Dry
0.15
9
Periodic lubrication
0.50
306
Periodic lubrication
0.25
15
0.80
490
39.2
0.15
0.80
400
490
Dry
Oiles
m/s
m/min
Dry
24.5 73.5
250
750
Periodic lubrication
40 400
40 752
40 150
40 302
40 150
40 302
Dry
0.50
30
Periodic lubrication
49 73.5
500
750
1.63
1,000
Periodic lubrication
1.00
2.45
60
1,500
40 120
40 248
29
Oiles
Metallic Bearing
2000S
296
49
1.00
1.63
60
1,000
40 120
40 248
500
Dry
Oiles
Air Bearings
Cermet M
10
102
Dry
0.85
51
Periodic lubrication
Cermet G
10
102
1.65
2.45
1,500
Slide Shifter
Technical
Information
300
Oiles
600
10
102
15
153
40 200
40 392
Dry
0.50
30
Periodic lubrication
0.86
490
Periodic lubrication
0.85
1.65
51
1,010
Periodic lubrication
Oiles
Periodic lubrication
99
Dry
Oiles
1.65
1,010
Periodic lubrication
1.00
60
Oil lubrication
1.25
765
Oil lubrication
3.35
3.25
201
1,990
Periodic lubrication
Periodic lubrication
1.65
99
Oil lubrication
40 250
40 482
40 150
40 302
1.65
1,010
Oil lubrication
5.00
3.25
300
1,990
40 150
40 302
Corporate Profile
Allowable weight W
37
Oiles
Nkgf
Static bearing pressures defined: Bearing pressures in applications with no motion or very small motion ( 0.0017m/s[0.1m/min]).
Lead free
METALLIC BEARINGS
Dry
Dry
Dry
P.56
P.217
P.219
P.220
P.221
P.56
P.223
P.224
P.57
P.225
P.227
P.229
P.230
P.231
P.233
P.235
P.236
P.237
P.239
P.240
P.57
P.243
Dry
Custom-made
Dry
P.58
P.245
P.247
P.248
P.249
P.250
P.58
P.251
P.253
P.254
Periodic
lubrication
Dry
Periodic
lubrication
Periodic
lubrication
P.59
P.265
P.266
P.266
Dry
P.63
P.315
P.317
Corporate Profile
usable
P.255
600
Oil
lubrication
Periodic
lubrication
P.58
P.257
P.259
P.261
P.262
P.263
P.264
Technical
Information
Oil
lubrication
30B
30B
30F
30W
30M
30S
300
Slide Shifter
Periodic
lubrication
Air Bearings
Metallic Bearing
Periodic
lubrication
Multi-layer Bearing
Plastic Bearing
Product
Information
Periodic
lubrication
Selection Guide
Corrosive
Lubrication Atmosphere In water In seawater In chemical condition
38
Selection Guide
Selection Guide
Scope of ApplicationThe value shown below are obtained in shaft rotation condition in the atmosphere.
Allowable max pressure P Allowable max velocity V Allowable max PV value Temperature range
Product
Product Name
N/mm2
kgf/cm2
m/s
m/min
N/mm2m/s
kgf/cm2m/min
Allowable weight W
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Nkgf
Oiles
Shoe units
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
Air Bearings
Product
Product Name
Oiles
39
Air Bearings
Lead free
Temperature range
METALLIC BEARINGS
Dry
Dry
P.63
P.319
P.321
P.57
P.241
P.242
Plastic Bearing
usable
Product
Information
Periodic
lubrication
Periodic
lubrication
Selection Guide
Corrosive
Lubrication Atmosphere In water In seawater In chemical condition
AIR BEARINGS
Multi-layer Bearing
Custom-made
P.60
P.269
Metallic Bearing
Corrosive
Lubrication Atmosphere In water In seawater In chemical condition
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
40
41
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Product Information
PLASTIC BEARINGS
MULTI-LAYER BEARINGS
METALLIC BEARINGS
AIR BEARINGS
SLIDE SHIFTERS
P.43
P.51
P.54
P.60
P.61
42
PLASTIC BEARINGS
Plastic Bearing
P.76
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
P.65
Product
Information
Selection Guide
Product Information
43
P.79
PLASTIC BEARINGS
Material products
Custom-made products
Conductive
Lead-free
P.81
P.83
Technical
Information
Corporate Profile
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Standard products
44
PLASTIC BEARINGS
P.89
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
45
P.87
Product
Information
Selection Guide
Product Information
P.91
PLASTIC BEARINGS
Material products
Custom-made products
Conductive
Lead-free
P.93
P.95
Metallic Bearing
The Oiles 88 series are self-lubricating bearings made of polyester plastic with
added lubricating oil and special filler. They are available in various grades.
Serviceable without the need for lubrication.
Features low coecient of friction and superior impact resistance.
Features superior vibration-proof and soundproof characteristics.
Injection-molded and can be made in complicated shapes. Has
good mass productivity.
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Standard products
Air Bearings
P.96
Technical
Information
Corporate Profile
The Oiles 88 elastomer series are engineering elastomer made of thermoplastic polyester elastomer with additive.
Among thermo-plastic elastomer, the Oiles 88 elastomer features
superior high temperature characteristics and is applicable to wide
temperature range from low to high temperatures.
Has superior wear resistance. Demonstrates outstanding resistance
against abrasive wear caused by dust and coarse mating surface, in
particular.
Has rubber elasticity and exibility, superior impact resistance, and
large vibration-proof and noise suppressing eects.
Features superior oil resistance, chemical resistance, and aging
resistance among elastomer type exible plastic.
Slide Shifter
88 ElastomerPolyester elastomer
46
Selection Guide
Product Information
PLASTIC BEARINGS
P.97
The Oiles 88-03 series are self-lubricating bearings made of PBT with added
special filler.
Serviceable without the need for lubrication.
Soft metal (such as aluminum) may be used as mating shafts.
Injection-molded and can be made in complicated shapes. Has
good mass productivity.
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
47
P.99
P.105
PLASTIC BEARINGS
Material products
Custom-made products
Conductive
Lead-free
P.105
P.113
P.115
Technical
Information
Corporate Profile
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
The Oiles Glitron SE series are conductive versions of the Oiles Glitron S. They
contain special additive to offer good sliding characteristics.
Serviceable completely without the need for lubrication. Features a
small dierence between the static and dynamic coecient of friction
and oers stable friction characteristics.
Applicable to wide temperature ranges from low to high temperatures.
Soft metal (such as aluminum) may be used as mating shafts.
Has superior dimensional stability, allowing precision designs. Has
good mass productivity.
Has antistatic-level conductivity.
The standard products in various sizes applicable to miniature bearings
are available.
Product
Information
Selection Guide
Standard products
48
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Product Information
49
PLASTIC BEARINGS
P.121
P.123
P.127
PLASTIC BEARINGS
Material products
Custom-made products
Conductive
Lead-free
P.129
P.131
Technical
Information
Corporate Profile
The Oiles 470 bearings are made of reinforced base material mixed with carbon
fiber or woven fabric and special solid lubricant, which are formed by compression.
Has self-lubricating performance. Demonstrates low coefficient
of friction and superior wear performance especially in water,
chemicals, or oil.
Demonstrates superior wear performance and maintains stable
performance even under abrasive conditions subject to soil, sand,
foreign matter or rust on the mating parts.
A multi-layer type (470-02W), which incorporates 470-02 on the
sliding surface and 250 or 425 as the backing material is also
available.
The standard split metal for flocculators and bearing units are
available on order.
Slide Shifter
Air Bearings
Metallic Bearing
NEW
P.130
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Standard products
50
MULTI-LAYER BEARINGS
P.147
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
The Oiles Drymet LF series are self-lubricating bearings composed of three layers:
Polytetrafluoroethylene plastic layers with fillers, sintered bronze layers, and back metals.
Serviceable without the need for lubrication. Thin and lightweight for
compact design.
Demonstrate low coefficient of friction and superior load performance
under high-load, low-speed conditions.
Usable at the PV values even in the middle- and high-speed zones when
lubricated.
Usable in wide temperature ranges from low to high temperatures. Has
superior chemical resistance.
Features superior dimensional stability, mechanical strength, and thermal
conductivity.
The 0.5 mm thin standard LFCF products are also available for space saving.
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
51
P.137
Product
Information
Selection Guide
Product Information
P.160
MULTI-LAYER BEARINGS
Material products
Custom-made products
Conductive
Lead-free
P.162
P.165
Technical
Information
Corporate Profile
The Oiles Toughmet series are bearings for high-temperature and high-load
applications composed of two layers: Sintered copper alloy layers where
special solid lubricant is dispersed uniformly and finely, and back metals.
Has superior load resistance and heat resistance. Also conductive.
Demonstrates superior performance even in reciprocating,
oscillating, and intermittent operations.
Demonstrates much superior performance by the action of oil
retaining the strength of the sintered copper alloy layer and solid
lubricant.
Thin bearing allows compact design.
Slide Shifter
P.166
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Standard products
52
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Product Information
53
MULTI-LAYER BEARINGS
Oiles Toughmet DWear resistant special additive dispersed sintered bronze bearings with back metals
P.169
P.175
P.175
MULTI-LAYER BEARINGS
Standard products
Material products
Custom-made products
Conductive
Lead-free
P.181
Selection Guide
METALLIC BEARINGS
METALLIC BEARINGS
Metallic Bearing
Multi-layer Bearing
P.205
Plastic Bearing
Product
Information
The Oiles 500SP1 series are self-lubricating bearings composed of highstrength brass alloy bases made with advanced casting technology and
embedded solid lubricants. They may be combined with various types of solid
lubricants according to the conditions of use.
Serviceable without the need for lubrication. Demonstrates high
performance under high-load and low-speed operations.
Demonstrates superior wear resistance in applications where oil
lm is seldom produced such as reciprocating motions, oscillation,
frequent starts and stops, etc.
Superior chemical resistance and corrosion resistance.
Standard products are available in various sizes.
Air Bearings
P.206
Technical
Information
The Oiles 500SP5 series are bearings composed of special high-strength cast
brass bases featuring higher strength and hardness than the 500SP1 and
embedded solid lubricant. They demonstrate superior wear resistance under
high-load conditions.
Bears higher loads than the 500SP1.
Demonstrates superior wear resistance under high-load and lowspeed applications.
Slide Shifter
Corporate Profile
54
METALLIC BEARINGS
Oiles 500SPRHard special copper alloy bearings with embedded solid lubricant
P.207
Oiles 500HPHard special copper alloy bearings with embedded solid lubricant
P.209
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Product Information
55
P.211
METALLIC BEARINGS
Material products
Custom-made products
Conductive
Lead-free
P.213
P.217
P.223
Technical
Information
Corporate Profile
The Oiles 500 spherical bearings are self-aligning type bearings composed of
the Oiles 500SP inner races and high carbon chromium bearing steel outer
races, which are coated with molybdenum disulfide. The outer races are split
into two parts, which are fixed with snap rings.
Conforms to the ISO Standard E type bearings and compatible
dimensionally. High precision.
Applicable to large oscillating angles in circumferential oscillating
motions.
Serviceable without the need for lubrication. Features a very long
service life.
Slide Shifter
Air Bearings
The Oiles 500F series are self-lubricating bearings for low-speed, middle-load
applications composed of cast iron bases and embedded solid lubricant.
Serviceable without the need for lubrication. Demonstrates high
performance under low- and middle-load, low-speed operations.
Demonstrates superior wear resistance in applications where oil
lm is seldom produced such as reciprocating motions, oscillation,
frequent starts and stops, etc.
Lower prices than the bearings with copper alloy bases.
Standard products are available in various sizes.
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
The Oiles 500B series are self-lubricating bearings for middle loads composed
of cast bronze bases and embedded solid lubricant. Two types of base
materials are available: 500B1 CAC406 (BC6) for general use and 500B2
CAC403 (BC3) for high temperatures.
Serviceable without the need for lubrication. Demonstrates high
performance under middle-load and middle-speed operations.
Usable at high temperatures.
Has superior chemical and corrosion resistances.
Standard products are available in various sizes.
Product
Information
Selection Guide
Standard products
56
METALLIC BEARINGS
The Oiles 2000 series are composite multi-layer bearings composed of sliding
surfaces made of special sintered material and steel back metals. Solid
lubricant mainly made of graphite is dispersed in the sintered layer, which is
sintered and impregnated with oil.
Dispersed solid lubricant allows motions in any direction and oers
superior performance for minute movements.
Serviceable without the need for lubrication.
Features superior load resistance, speed characteristics, and wear
resistance.
Standard products and plates for additional machining are
available in various sizes.
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
57
P.225
Product
Information
Selection Guide
Product Information
P.241
P.243
METALLIC BEARINGS
Material products
Custom-made products
Conductive
Lead-free
P.245
P.251
Technical
Information
Corporate Profile
The Oiles 300 series are bearings made of oil-impregnated porous cast iron,
which is made by actively utilizing the growing phenomenon of cast iron.
Reduces much less lubrication than copper alloy bearings.
Maintains oil film well and features superior wear resistance and
seizure resistance.
Places no restrictions on sliding surface shapes or motion forms.
Available in larger dimensions than oil-impregnated sintered
bearings.
Standard products and materials for machining are available in
various sizes.
Slide Shifter
P.255
Air Bearings
Metallic Bearing
The Oiles Cermet G series are self-lubricating bearings for high temperature
made of sintered alloy, in which solid lubricant mainly consisting of graphite
is dispersed.
Serviceable without the need for lubrication. Features superior
heat resistance.
Subject to no cracks or growth even if repetitively exposed to high
temperature.
Demonstrates superior performance in hot and hard-to-lubricate
applications.
Materials for machining are available.
Multi-layer Bearing
Plastic Bearing
The Oiles Cermet series are self-lubricating bearings made of sintered alloy, in
which solid lubricant mainly consisting of molybdenum disulfide is dispersed.
Serviceable without the need for lubrication. Demonstrates higher
performance when lubricated.
Demonstrates superior wear resistance in applications where oil
lm is seldom produced such as reciprocating motions, oscillation,
frequent starts and stops, etc.
Standard products and materials for machining are available in
various sizes.
Product
Information
Selection Guide
Standard products
58
Selection Guide
Product Information
METALLIC BEARINGS
P.265
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
59
The Oiles 600 series are highly wear-resistant bearings made of cast bronze
with special elements added to improve the lubricating oil retaining
performance.
Demonstrates wear resistance and seizure resistance in lubricated
conditions.
Reduces the frequency of lubrication.
Demonstrates especially high running-in characteristics.
Materials for machining are available.
METALLIC BEARINGS
Standard products
Material products
Custom-made products
Conductive
Lead-free
P.269
Plastic Bearing
The Oiles Air Bearings are self-lubricating bearings for high-rigidity, highprecision and high-speed applications made of integrated original porous
sintered layers and back metals.
Almost no coecient of friction and free from stick slips, enabling
positioning control at very high accuracy.
Originally developed porous material allows optimum drawing.
Demonstrates high load performance and high bearing rigidity.
Integration of sintered layers with back metals simplifies
machining, allowing manufacturing at low cost.
Product
Information
Selection Guide
AIR BEARINGS
AIR BEARINGS
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
60
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Product Information
OILES SLIDE SHIFTERS and GUIDES
Guide units for linear reciprocating motions featuring superior wear resistance, load resistance and foreign
matter resistance
Self-lubricating: Oiles bearings offer self-lubricating operation for long.
Wide variations: Variety of models allows proper selection according to purposes and ensures the highest cost performance.
Quiet: Oiles bearings produce low sliding noises and offer good quietness.
Foreign matter resistance and load resistance: Oiles bearings offer superior foreign matter resistance and load resistance.
P.275
Corrosion resistance
The guide rails are chrome-plated S45C for improved corrosion
resistance.
Compact design
The type S series are compact and solid dovetail type slide
guides.
Clearance adjustment
The clearances of the shift tables may be easily adjusted by pulling and
pushing the gibs with bolts.
P.279
Adjustment-free
Corporate Profile
Technical
Information
The clearance between the guide rail and shift table need
not be adjusted.
61
Economical
Linear guides at low prices.
* The SE type series are compatible with the S type series.
Material products
Custom-made products
Conductive
Lead-free
P.289/293
Selection Guide
Economical
Allows economical designs.
Plastic Bearing
P.295/299
Free design
Allows free combinations of shift tables, guide shafts, and shaft holders.
Metallic Bearing
Multi-layer Bearing
Air Bearings
P.311
Rigid design
Slide Shifter
Technical
Information
Integrated unit
Corporate Profile
62
Selection Guide
Product Information
GUIDE UNITS
P.315/319
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
63
The Oiles 500 Guide Units are highly durable guide units with Oiles bearings
in the sliding surfaces exclusively designed for reciprocating motion.
Highly rigid guide units for improved strength.
Available in various inner diameters, length, etc.
Pilots may be used for positioning. (BT Type)
Plastic Bearings
Oiles 80 P.65
Oiles Pillow 80 P.76
Oiles PS Bearings P.79
Oiles Lutech S P.81
Oiles Lutech E P.83
Oiles Lutech GP P.87
Oiles 480-02 P.89
Oiles 81 P.91
Oiles 83 P.93
Oiles 88 P.95
Oiles 88 Elastomer P.96
Oiles 88-03 P.97
Oiles Glitron F P.99
Oiles Glitron S/SEP.105
Oiles 50 P.113
Oiles Aramid M/F1 P.115
Oiles 250 P.121
Oiles 425 P.123
Oiles Fiberflon FW P.127
Oiles Fiberflon TR P.129
Oiles Fiberflon OH P.130
Oiles 470-02/02W P.131
64
Standard
Material
Custom-made
Product
Information
Selection Guide
Oiles 80
4080
2
kgf/cm2
Allowable max. pressure P N/mm
17.5179
Slide Shifter
Air Bearings
Technical
Information
Corporate Profile
Relief angle
510
Rake angle
1020
0.8551
Nose radiusmm
0.200.40
2.451,500
Speed m/min
100250
Cut depth mm
0.100.50
Feed mm/rev
0.050.20
ASTM D 792
Tensile strength
ASTM D 638
ASTM D 638
Flexural property
ASTM D 790
2
2
N/mmkgf/cm
76.5780
Flexural modulus
ASTM D 790
2
2
N/mmkgf/cm
2,65027,000
ASTM D 695
2
2
N/mmkgf/cm
2
2
N/mmkgf/cm
1.39
51.0520
60
21.1215
81.9835
Hardness
ASTM D 785
HRM72
ASTM D 256
J/mkgfcm/cm
58.86.00
65
carbide toolJIS
Dry
10% deformation
Image
Cutting tool
Metallic Bearing
Lubrication condition
1% deformation
Lubricating oil
Lathe turning
Service range
Compressive stress
Polyacetal
Condition
Multi-layer Bearing
Plastic Bearing
Feature
105 1
813
ASTM D 648
110
Melting point
DSC
165
UL incombustibility
UL94
File No.E78113
HB
The values shown above are typical values, not the standard values.
O.D.
Length
1.0
Testing conditions
Bearing dimension3538R20
2
2
Pressure0.39N/mm4.0kgf/cm
0.8
0.6
Sintered oil impregnated copper type bearing
0.4
Product
Information
Velocity1.133m/s
68.0m/min
Wear amount
mm
Lubricationgrease is applied at
the time of assembly
Selection Guide
Test data
0.2
Oiles 80
2.45
4.90
7.35
9.81
12.25 14.71 17.16
25 50 75 100 125 150 175
2
Plastic Bearing
N/mm
Velocity0.02m/s
1.2m/min
0.4
0.3
Nylon with MoS2
0.2
0.1
Oiles 80
Oscillating cycle72cpm
Noise
10
12
14
103m
Sliding distance
Velocity0.167m/s
10.0m/min
Test time50hrs.
Lubricationdry
1.0
0.8
Wear amount
Nylon66
0.6
Air Bearings
Mating materialS45C
surface roughness 3mRy
Coecient of friction
Lubricationgrease is applied at
the time of assembly
2
2
Pressure2.94N/mm30.0kgf/cm
Metallic Bearing
Oscillating angle24
0.068mm
0.4
Polyacetal
0.056mm
0.2
Oiles 80
10
20
30
0.031mm
40
50
Bearing dimension101410
Mating materialSUJ2
surface roughness approx. Ra0.1
Pressure0.98N/mm2
10kgf/cm2
Test time50hrs.
Lubricataion : dry
0.8
0.6
Oiles 80-LVF
0.4
0.2
0
Oiles 80
10
20
30
Test time
hrs.
Wear amount
0.007mm
0.007mm
40
50
Corporate Profile
Volocity0.17m/s
10m/min
1.0
Technical
Information
Testing conditions
Coecient of friction
Test time
hrs.
Slide Shifter
Multi-layer Bearing
Bearing dimension4050R30
Wear amount
mm
Pressure kgf/cm2
66
Selection Guide
80B
Oiles 80 Bushings
Specify Part No. by required I.D. and length.
(e.g.) I.D. is 15mm and length is 10mm.
80B - 1510
Parts No.
Mating shaft
Housing
Bushing
H7
0.8
h7
Product
Information
Motion
direction
chamfer
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
6.3
67
Shaft
h7
Length Tolerance
0
2 0.010
0
3 0.010
0
4 0.012
0
5 0.012
0
6 0.012
0
7 0.015
0
8 0.015
0
9 0.015
0
10 0.015
0
12 0.018
0
14 0.018
0
15 0.018
0
16 0.018
0
18 0.018
0
20 0.021
0
22 0.021
0
24 0.021
0
25 0.021
0
28 0.021
0
30 0.021
0
32 0.025
0
35 0.025
0
38 0.025
0
40 0.025
0
45 0.025
0
50 0.025
Housing
H7
diameter Tolerance
4 0.012
0
0.012
5 0
6 0.012
0
0.015
7 0
8 0.015
0
9 0.015
0
10 0.015
0
0.018
11 0
12 0.018
0
14 0.018
0
0.018
16 0
17 0.018
0
18 0.018
0
0.021
20 0
23 0.021
0
25 0.021
0
27 0.021
0
0.021
28 0
32 0.025
0
34 0.025
0
0.025
36 0
39 0.025
0
42 0.025
0
0.025
44 0
50 0.025
0
55 0.030
0
I.D.
d Tolerance D Tolerance
2
3
4
5
6
7
8
9
10
12
14
15
16
18
20
22
24
25
28
30
32
35
38
40
45
50
0.065
0.015
0.080
0.030
0.095
0.045
0.095
0.045
0.095
0.045
0.095
0.045
0.120
0.060
0.120
0.060
0.120
0.060
0.120
0.060
0.120
0.060
0.120
0.060
0.120
0.060
0.120
0.060
0.145
0.075
0.145
0.075
0.145
0.075
0.170
0.090
0.170
0.090
0.170
0.090
0.215
0.115
0.215
0.115
0.215
0.115
0.215
0.115
0.235
0.135
0.235
0.135
O.D.
4
5
6
7
8
9
10
11
12
14
16
17
18
20
23
25
27
28
32
34
36
39
42
44
50
55
0.107
0.032
0202
0203
0303
0403
0503
0204
0304
0404
0504
0604
0.107
0.032
0.107
0.032
0.157
0.045
0.157
0.045
0.157
0.045
0.157
0.045
0.193
0.058
0.193
0.058
0.193
0.058
0.193
0.058
0.193
0.058
0.193
0.058
0.221
0.071
0.221
0.071
0.231
0.081
0.231
0.081
0.231
0.081
0.290
0.095
0.290
0.095
0.290
0.095
0.290
0.095
0.340
0.115
0.340
0.115
0.340
0.115
0.430
0.130
80B-1510
Tolerance 00.5
0305
0405
0505
0605
0705
0805
0905
1005
0306
0406
0506
0606
0706
0806
0906
1006
1206
0508
0608
0708
0808
1008
1208
10
0610
0710
0810
0910
1010
1210
1410
1510
1610
1810
Selection Guide
0.30.5
mm
(Note 1) 80B-04060.580B-06041
The inner diameter tolerances are the values after pressing into a ring gauge of D 0.002.
A stopper is needed at the temperature of 0C or less, since the bushing is dislocated due to thermal shrinkage.
1525
1625
1825
2025
2425
2525
2825
3025
4025
40
4050
4550
5050
2
3
4
5
6
7
8
9
10
12
14
15
16
18
20
22
24
25
28
30
32
35
38
40
45
50
1530
1630
1830
2030
2230
2530
2830
3030
3230
3530
3830
4030
4530
5030
3040
3240
3540
3840
4040
4540
5040
Corporate Profile
50
Technical
Information
3525
30
Slide Shifter
2415
2515
1020
1220
1420
1520
1620
1820
2020
2220
2420
2520
2820
3020
3220
3520
3820
4020
4520
5020
25
Air Bearings
0815
0915
1015
1215
1415
1515
1615
1815
2015
20
I.D.
Metallic Bearing
0812
0912
1012
1212
1412
1512
1612
1812
15
0.5
Multi-layer Bearing
Length LTolerance
Plastic Bearing
12
Product
Information
1
2 mm
C0.3 R0.4 R0.6 R0.8 mm
b
68
Selection Guide
80F
80F - 1510
Parts No.
Mating shaft
Flange bushing
Housing
H7
F
D
d
0.8
h7
Product
Information
Motion
direction
chamfer
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
6.3
I.D.
O.D.
d Tolerance D Tolerance F
2
3
4
5
6
7
8
9
10
12
14
15
16
18
20
22
25
30
32
35
38
40
45
50
0.065
0.015
0.080
0.030
0.095
0.045
0.095
0.045
0.095
0.045
0.095
0.045
0.120
0.060
0.120
0.060
0.120
0.060
0.120
0.060
0.120
0.060
0.120
0.060
0.120
0.060
0.120
0.060
0.145
0.075
0.145
0.075
0.170
0.090
0.170
0.090
0.215
0.115
0.215
0.115
0.215
0.115
0.215
0.115
0.235
0.135
0.235
0.135
4
5
6
7
8
9
10
11
12
14
16
17
18
20
23
25
28
34
36
39
42
44
50
55
0.107
0.032
0.107
0.032
0.107
0.032
0.157
0.045
0.157
0.045
0.157
0.045
0.157
0.045
0.193
0.058
0.193
0.058
0.193
0.058
0.193
0.058
0.193
0.058
0.193
0.058
0.221
0.071
0.221
0.071
0.231
0.081
0.231
0.081
0.290
0.095
0.290
0.095
0.290
0.095
0.340
0.115
0.340
0.115
0.340
0.115
0.430
0.130
Flange
6
8
9
10
12
13
15
16
18
20
22
23
24
26
31
33
36
42
46
49
52
54
60
65
t Tolerance
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.5
1.5
1.5
2
2
2
2
2
2.5
2.5
0
0.10
0202
0203
0303
0403
0503
0603
0703
0803
0903
1003
0204
0304
0404
0504
0
0.10
0
0.10
0
0.10
0
0.10
0
0.10
0
0.10
0
0.10
0
0.10
0
0.10
0
0.10
0
0.10
0
0.10
0
0.10
0
0.15
0
0.15
0
0.15
0
0.15
Corporate Profile
0305
0405
0505
0605
0705
0805
0905
1005
0306
0406
0506
0606
0806
0906
1006
1206
0507
0707
10
0608
0610
0710
0810
0910
1010
1210
1410
1510
1610
1810
2010
2210
2510
3010
0808
1008
1208
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
69
3510
Selection Guide
a
b
a
c
(Note 1)
35 50
0.3
1
0.5
2 mm
3/4mm:0.5
(Note 1) 2mm:0.3
Some products
have
chamfering
2
0.3
The inner diameter tolerances are the values after pressing into a ring gauge of D 0.002.
A stopper is needed at the temperature of 0C or less, since the bushing is dislocated due to thermal shrinkage.
12
4025
4525
1530
1630
1830
2030
2230
2530
3030
3230
3530
3830
4030
4530
5030
40
3040
3240
3540
3840
4040
4540
5040
50
4050
4550
5050
2
3
4
5
6
7
8
9
10
12
14
15
16
18
20
22
25
30
32
35
38
40
45
50
Technical
Information
4012
1525
1625
1825
2025
2225
2525
3025
3225
3525
30
Slide Shifter
3512
1020
1220
1420
1520
1620
1820
2020
2220
2520
3020
3220
3520
3820
4020
4520
5020
25
Air Bearings
2512
3012
0815
0915
1015
1215
1415
1515
1615
1815
2015
2215
2515
20
Metallic Bearing
0812
0912
1012
1212
1412
1512
1612
1812
2012
15
I.D.
Multi-layer Bearing
Plastic Bearing
Product
Information
Corporate Profile
70
Selection Guide
80W
Oiles 80 Washers
Specify Part No. by required I.D.
(e.g.) I.D. is 15mm.
80W - 15
Multi-layer Bearing
D
d
Plastic Bearing
Product
Information
Parts No.
80W
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
83W
71
Parts No.
80W-08
80W-10
80W-12
80W-15
80W-17
80W-21
80W-23
80W-25
I.D.
O.D.
Thickness
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
17
24
28
28
30
37
39
44
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Oiles 83 Washers
Selection Guide
83W
83W - 15
Parts No.
D
d
Plastic Bearing
Product
Information
Multi-layer Bearing
80W
83W
Metallic Bearing
O.D.
Thickness
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
17
24
28
28
30
37
39
44
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
1
1
1
1
1
1
1
1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Slide Shifter
83W-08
83W-10
83W-12
83W-15
83W-17
83W-21
83W-23
83W-25
I.D.
Air Bearings
Parts No.
Technical
Information
Corporate Profile
72
Selection Guide
80M
80M - 35
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
73
Product
Information
Parts No.
Parts No.
80M-06
80M-10
80M-15
80M-20
80M-25
80M-30
80M-35
80M-40
80M-45
80M-50
80M-55
80M-60
80M-65
Diameter
Length
D Tolerance
6.5
11
17
21.5
26
31.5
36
41.5
46.5
52
57
61.5
67
0.4
0.4
0.4
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.6
0.6
500
500
500
500
500
500
500
500
500
500
500
500
500
Selection Guide
80P - 1 1
Parts No.
Product
Information
80P
Width
T Tolerance W Tolerance
8
11
13
18
0.2
0.2
0.2
0.3
105
80
105
105
0.5
0.5
0.5
0.5
Length
L
1,000
1,000
1,000
1,000
Multi-layer Bearing
80P-08
80P-11
80P-13
80P-18
Thickness
Plastic Bearing
Parts No.
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
74
Selection Guide
80S
80S - 5060
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
75
D
d
Product
Information
Parts No.
Parts No.
80S-2030
80S-2535
80S-3040
80S-3545
80S-3550
80S-4055
80S-4060
80S-4560
80S-4565
80S-5060
80S-5065
80S-5070
80S-5565
80S-5570
80S-5575
80S-6075
I.D.
O.D.
d Tolerance D Tolerance
19
24
28.5
34
34
38
38
43
43
48.5
48.5
48.5
53.5
53.5
53.5
58.5
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
31.5
36.5
42
47
52
56.5
62.5
62.5
67
62.5
67
72.5
67.5
72.5
78
78
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.5
0.6
0.6
0.6
0.6
0.6
0.6
Length
L
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
Unit bearings
Selection Guide
Oiles Pillow 80
Product
Information
Operating condition
Service temperature range
Continuous
2060
2.021
0.40
24
0.2515
0.50
306
0.30184
Metallic Bearing
2
kgf/cm2
Allowable max. pressure P N/mm
Intermittent
Multi-layer Bearing
Service range
Plastic Bearing
Feature
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
76
Selection Guide
80FL
80FL - 12
Product
Information
Parts No.
0.3
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
S1
1.6
Outer case
(reinforced plastic)
p
a
Oiles 80
Parts No.
77
S2
Multi-layer Bearing
Plastic Bearing
R0.3
80FL-06
80FL-08
80FL-10
80FL-12
80FL-15
80FL-17
80FL-20
I.D.
Outer dimensions
d Tolerance a
6
8
10
12
15
17
20
0.068
0.020
0.083
0.025
0.083
0.025
0.102
0.032
0.102
0.032
0.124
0.040
0.124
0.040
38
42
48
56
64
75
82
b
20
24
28
34
40
45
50
W
7
10
11
13
16
18
20
f
14
19
22
27
31
35
38
Mounting hole
Bolt Tightening
torque
size
Tolerance g
S1
0
0.070
6
9
10
12
15
16
18
26
30
35
42
48
56
63
4.5 5 13
4.5 5 10
5.5 6
8
6.5 7
7
6.5 7.5 6
8.5 9.5 11
8.5 10
9
0
0.084
0
0.084
0
0.100
0
0.100
0
0.160
0
0.160
2.5
2.5
3
3
4
4.5
5
S2
kgfcm
M4 2010
M4 2515
M5 3520
M6 5540
M6 9055
M8 11070
M8 14090
Selection Guide
80UP
80UP - 12
Parts No.
Product
Information
S1
S2
Plastic Bearing
Parts No.
Outer dimensions
d Tolerance a
0.083
0.025
0.083
0.025
0.102
0.032
0.102
0.032
0.124
0.040
0.124
0.040
39
45
53
60
67
80
88
Bolt Tightening
size
torque
S1
12
15
16
18
21
24
26
7
10
11
13
16
18
20
7
9
11
13
15
17
19
14
18
22
26
30
34
38
26
30
36
42
48
56
63
4.5 5
13
4.5 5
10
5.5 6
8
6.5 7
7
6.5 7.5 6
8.5 9.5 11
8.5 10
9
S2
kgfcm
M4 2015
M4 3020
M5 4530
M6 7550
M6 9060
M8 12075
M8 15090
Slide Shifter
6
8
10
12
15
17
20
0.068
0.020
Form
Air Bearings
80UP-06
80UP-08
80UP-10
80UP-12
80UP-15
80UP-17
80UP-20
I.D.
Metallic Bearing
Oiles 80
Multi-layer Bearing
Outer case
(reinforced plastic)
p
a
Technical
Information
Corporate Profile
78
Selection Guide
Product
Information
Oiles PS Bearings
Custom-made
Standard product
Corporate Profile
Technical
Information
Slide Shifter
Metallic Bearing
Service range
Air Bearings
Multi-layer Bearing
Plastic Bearing
Feature
79
1
rpm Allowable max. WN value Ns1 kgfrpm Service temperature range
Allowable max. load W NkgfAllowable max. revolution N S
11,70049,000
1,1945,000
4.001.50
24090
1,4702,450
9,00015,000
4080
Service range
Parts No.
PST-163605
PST-204205
PST-254705
PST-305205
PST-406805
PST-507805
Allowable max. load W Allowable max. revolution N Allowable max. WN value Service temperature range
1
1
Ns
Nkgf
s
rpm
kgfrpm
11,7001,194
4.00240
1,470 9,000
16,6001,694
3.50210
1,630 9,980
19,6002,000
3.00180
1,79010,959
22,5002,296
2.50150
1,79010,959
41,1004,194
2.00120
2,45015,000
49,0005,000
1.50 90
2,45015,000
4080
NotesThe WN values are the products of the loads and revolutions in operation.
In oscillating motion, the revolution N found using the conversion expression below must be not more than the
allowable maximum revolution.
N: revolution
180
n
Revolution N
: oscillation angle
1
s
rpm
1
n: oscillation cycle speed s
cpm
Selection Guide
PST
Oiles PS Bearings
Specify Part No. by required I.D., O.D., and thickness.
Product
Information
PST - 254705
Plastic Bearing
Parts No.
T
O.D.
Thickness
d Tolerance D
16
20
25
30
40
50
T Tolerance
5
5
5
5
5
5
36
42
47
52
68
78
0.21
0
0.21
0
0.21
0
0.25
0
0.25
0
0.5
0.5
0.5
0.5
Metallic Bearing
PST-163605
PST-204205
PST-254705
PST-305205
PST-406805
PST-507805
0.18
0
Multi-layer Bearing
I.D.
Parts No.
0.5
0.5
Testing condtions
Test samplePST-204205
Rotational frequency1s1
Oscillating angle40
Ambient temperature23
W
W
0.08
0.04
Oiles PS bearing
Test samplePST-204205
Rotational
frequency1s1
Thrust load2,450N
250kgf
Oscillating angle40
981
100
1,960
200
2,940
300
3,920
400
4,900
500
Pressure kgf
0.04
0.02
30 20
20
40
Ambient temperature
60
80
Corporate Profile
Oscillating cycle60cpm
Technical
Information
Testing conditions
Coecient of friction
Slide Shifter
Oscillating cycle60cpm
0.12
Air Bearings
Coecient of friction
Test data
80
Product
Information
Selection Guide
Oiles Lutech S
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Serviceable without the need of lubrication and demonstrates superior
friction characteristics under light-load and high-speed conditions.
Features low coefficient of friction and superior speed characteristics.
Prevents stick slips and squeak noises.
Injection-molded and can be made in complicated shapes. Has good mass
productivity.
Service range
Lubrication condition
Dry
4080
2
kgf/cm2
Allowable max. pressure P N/mm
Specific gravity
ASTM D 792
Tensile strength
ASTM D 638
Slide Shifter
2
2
N/mmkgf/cm
1.36
44.1450
30
Flexural property
ASTM D 790
2
2
N/mmkgf/cm
60.8620
Flexural modulus
ASTM D 790
2
2
N/mmkgf/cm
2,11021,500
ASTM D 695
2
2
N/mmkgf/cm
1% deformation
10% deformation
Technical
Information
2.451,500
Compressive stress
Corporate Profile
1.6599
81
5.051
Hardness
ASTM D 785
15.7160
74.0755
HRM75
39.24.00
105 1
813
Melting point
DSC
165
UL incombustibility
UL94
File No.E78113
HB
The values shown above are typical values, not the standard values.
Selection Guide
2
2
Pressure0.098N/mm1.0kgf/cm
Velocity0.783m/s
47.0m/min
Rotation3,000rpm
Test time500hrs.
Lubricationdry
0.4
Conventional POM bearing
0.3
0.2
0.1
Oiles Lutec S
0
0
100
200
300
Test time
hrs.
400
500
Plastic Bearing
0.5
Product
Information
Coecient of friction
Test data
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
82
Standard
Custom-made
Product
Information
Selection Guide
Oiles Lutech E
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Electrically conductive.
Serviceable without the need for lubrication and demonstrates superior
friction characteristics in light-load and high-speed conditions.
Features low coefficient of friction and superior wear resistance.
Prevents stick slips and squeak noises.
Non-rotating type standard products are available for replacement of sintered
bearings.
Service range
Lubrication condition
Dry
4080
2
kgf/cm2
Allowable max. pressure P N/mm
0.8350
Corporate Profile
Technical
Information
0.327200
Lathe turning
Relief angle
510
Rake angle
1020
Nose radiusmm
Condition
carbide toolJIS
Cutting tool
Slide Shifter
Air Bearings
83
9.81100
Speed m/min
100250
Cut depthmm
0.100.50
Feed mm/rev
0.050.20
0.200.40
I.D.
O.D.
Length
Specific gravity
ASTM D 792
Tensile strength
ASTM D 638
Lutech E-02
1.47
1.38
47.5484
42.9438
3.2
23
2
2
N/mmkgf/cm
Flexural property
ASTM D 790
2
2
N/mmkgf/cm
76.2777
71.9733
Flexural modulus
ASTM D 790
2
2
N/mmkgf/cm
3,00736,670
2,59526,459
ASTM D 695
2
2
N/mmkgf/cm
1% deformation
10% deformation
21.7221
88.9907
Plastic Bearing
Compressive stress
Product
Information
Lutech E
Selection Guide
HRM95
HRM90
ASTM D 256
J/mkgfcm/cm
333.36
313.16
ASTM D 696
105 1
813
813
ASTM D 648
118
117
Melting point
DSC
165
Volume resistivity
ASTM D 257
mcm
0.5045.0410
0.3083.0810
Surface resistivity
ASTM D 257
5.31102
2.21102
UL incombustibility
UL94
File No.E78113
HB
HB
Metallic Bearing
ASTM D 785
Multi-layer Bearing
Hardness
The values shown above are typical values, not the standard values.
Test data
Testing conditions
Bearing dimension1014R10
10
20
Velocity0.17m/s
10.0m/min
Test time72hrs.
Bearing dimension1014R10
Mating materialSUS303
2
2
Pressure0.20N/mm2.0kgf/cm
Test time100hrs.
50
60
wear amount
m
0.4
0.3
Conventional POM conductive grade B
0.2
0.1
Oiles Lutech E
0
0
10
30
20
40
60
50
70
80
Test time
hrs.
1.0
0.8
Sintered copper
0.6
0.4
0.2
Oiles Lutech E
0
0
10
20
30
40
50
60
Test timehrs.
70
80
90
100
Corporate Profile
Velocity0.03m/s
2.0m/min
40
Technical
Information
Testing conditions
30
Slide Shifter
Coecient of friction
2
2
Pressure0.98N/mm10.0kgf/cm
Coecient of friction
Mating materialS45C
surface roughness 0.8mRy
Air Bearings
84
Selection Guide
LED
LED - 0606
Parts No.
D
d
F
Plastic Bearing
c1
A
0.1 A
Wh
Multi-layer Bearing
L
a b: Chamfering for O.D.
a
1
b
0.3 mm
Technical
Information
Corporate Profile
a
b
c1
c2
0.5
0.2
C0.3
C0.5 mm
0.0
1
Parts No.
LED-0404
LED-0605
LED-0635
LED-0606
LED-0895
LED-0807
LED-1005
I.D.
O.D.
d Tolerance D Tolerance
4
6
6
6
8
8
10
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
8
9
10
10
11
12
14
0.01
0.06
0.01
0.06
0.01
0.06
0.01
0.06
0.01
0.06
0.01
0.06
0.01
0.06
Flange
W Tolerance
5.8
7.8
8.8
8.8
9.8
10.8
12.8
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
F
10
14
12
12
13
16
18
The effective range of the outer diameter tolerance is up to 3 mm from the flange bottom.
The recommended clearance is 0.030 to 0.095 mm for each dimension.
85
LED-0635
D
h 0.04
Metallic Bearing
Air Bearings
c2
0.05
0
Slide Shifter
Product
Information
W
0.3 A
Length
t Tolerance L Tolerance
1.0
2.0
1.5
1.5
1.5
2.0
2.0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
4
5
3.5
6
9.5
7
5
0.2
0.2
0.2
0.2
0.2
0.2
0.2
Selection Guide
LES
LES - 0616
Parts No.
0.0
1
D
h 0.04
Wh 0.013
W1
0.05
Section B-B
O.D.
D2
Flange
10
10
10
12
12
12
0.01
0.06
0.01
0.06
0.01
0.06
0.01
0.06
0.01
0.06
0.01
0.06
9.9
9.9
9.9
11.9
11.9
11.9
11
11
11
13
13
13
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
10
10
10
12
12
12
12
12
12
14
14
14
Length
L Tolerance
6
6
6
7
7
7
0.2
0.2
0.2
0.2
0.2
0.2
W1 Tolerance W2 Tolerance
9
9
9
10
10
10
0.013
0.049
0.013
0.049
0.013
0.049
0.013
0.049
0.013
0.049
0.013
0.049
0.8
1.2
1.6
1.2
1.6
2.0
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
Slide Shifter
6
6
6
8
8
8
Air Bearings
LES-0608
LES-0612
LES-0616
LES-0812
LES-0816
LES-0820
I.D.
Metallic Bearing
1.50.05
L
Parts No.
D1
D3
C0.3
D2MAX.
C0.3
D4
Multi-layer Bearing
W2
Plastic Bearing
0.037
Product
Information
30
Parts No.
LEM-20
LEM-30
LEM-40
LEM-50
Length
D Tolerance
21.5
31.5
41.5
52
0.4
0.4
0.5
0.5
500
500
500
500
Corporate Profile
Parts No.
Diameter
Technical
Information
LEM
86
Selection Guide
Product
Information
Oiles Lutech GP
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Serviceable without the need for lubrication.
Plastic parts may be used as mating parts.
Features low coefficient of friction and low variations caused by loads.
Prevents abnormal noises in plastic-to-plastic sliding applications.
Has superior wear resistance.
Injection-molded and can be made in complicated shapes. Has good mass
productivity.
Service range
Mating material
Plastic
Dry
Lubrication condition
Service temperature range
4080
2
kgf/cm2
Allowable max. pressure P N/mm
3.9240
9.81100
0.3320
0.6740
0.163100
0.327200
Slide Shifter
Air Bearings
Technical
Information
Metal
ASTM D 792
Tensile strength
ASTM D 638
ASTM D 638
Flexural property
ASTM D 790
2
2
N/mmkgf/cm
64.8661
Flexural modulus
ASTM D 790
2
2
N/mmkgf/cm
2,00620,471
Hardness
ASTM D 785
HRM65
ASTM D 256
J/mkgfcm/cm
36.83.75
ASTM D 648
107
UL incombustibility
UL94
File No.E78113
HB
2
2
N/mmkgf/cm
Corporate Profile
The values shown above are typical values, not the standard values.
87
1.35
48.0490
40
Selection Guide
0.25
0.20
0.15
0.10
0.05
0.98 1.96 2.94 3.92 4.90 5.88 6.86 7.84 8.82 9.80
102030405060708090
100
2
N/mm
Testing condtions
Bearing dimension1014R10
Mating materialPOM
M90-44
Velocity0.15m/s
9.0m/min
Test time950hrs.
Lubricationdry
Wear amount0.018mm
0.50
0.40
0.30
Metallic Bearing
2
2
Pressure0.07N/mm0.72kgf/cm
Multi-layer Bearing
Coecient of friection
Pressure kgf/cm2
0.20
0.10
0
100
200
300
400
500
600
700
800
900 1,000
2
2
Pressure0.49N/mm5.0kgf/cm
Velocity0.0167m/s
1.0m/min
Test time72hrs.
Lubricationdry
0.25
Company A POM
0.20
0.15
0.10
Oiles Lutech GP
0.05
0
10
20
30
40
50
Test time
hrs.
60
70
80
Technical
Information
Wear amount
Lutech GP : 0.0 / mating material : 0.0mm
Company A POM : 0.020 / mating material : 0.005mm
Coecient of friection
Mating materialPOM
M90-44
0.30
Slide Shifter
Testing condtions
Air Bearings
Test time
hrs.
Plastic Bearing
Velocity0.0167m/s
1.0m/min
0.30
Product
Information
Testing conditions
Coecient of friection
Test data
Corporate Profile
88
Product
Information
Selection Guide
Oiles 480
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Serviceable without the need for lubrication.
Non-organic filler improves strength.
Demonstrates superior wear resistance in abrasive conditions.
Serviceable under water.
Features superior speed characteristics.
Injection-molded and can be made in complicated shapes.
Has good mass productivity.
Conforms to the Food Sanitation Act of Japan at the temperature
C (212
F).
condition below 100
Excluded oil and fat food.
Service range
Lubrication condition
Dry
40120
2
kgf/cm2
Allowable max. pressure P N/mm
19.5199
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
89
0.6539
3.251,990
480-01
480-02
1.45
1.44
41.5423
101.81,038
23
2.1
Specific gravity
ASTM D 792
Tensile strength
ASTM D 638
ASTM D 638
Flexural property
ASTM D 790
2
2
N/mmkgf/cm
67.6689
143.01,458
Flexural modulus
ASTM D 790
2
2
N/mmkgf/cm
3,73038,000
7,13072,700
Hardness
ASTM D 785
HRM69
HRM74
ASTM D 256
J/mkgfcm/cm
39.24.00
45.84.67
ASTM D 696
105 1
210
310
ASTM D 648
108
157
Melting point
DSC
165
165
UL incombustibility
UL94
File No.E78113
HB
HB
2
2
N/mmkgf/cm
The values shown above are typical values, not the standard values.
For lathe turning or machining accuracy refer to page 65.
Selection Guide
48M
48M - 30
Parts No.
Parts No.
Length
D Tolerance
21.5
31.5
41.5
52
0.4
0.4
0.5
0.5
500
500
500
500
Testing conditions
Mating materialS45C
surface roughness 3mRy
2
Pressure2.45 to 24.5N/mm25.0
to 250.0kgf/cm2
2
2
1.23N/mm12.5kgf/cm
Velocity0.208m/s
12.5m/min
In water
20 to 47
0.10
In atmospheric air
4.9
50
9.8
100
14.7
150
19.6
200
24.5
250
N/mm
Velocity0.0183m/s
1.1m/min
Oscillating cycle70cpm
Oscillating angle15
0.25
Wear amount of polyacetal1.284mm
0.20
0.15
0.10
0.05
0
2
Pressure1.96 to 19.6N/mm20.0
to 200.0kgf/cm2
2
2
0.98N/mm10.0kgf/cm
Velocity
80
100
0.20
0.10
4.9
50
9.8
100
14.7
150
2
N/mm
Pressure kgf/cm2
19.6
200
Corporate Profile
Lubricationdry
0.0167m/s
1.0m/min
0.0500m/s
3.0m/min
W
0.0833m/s
5.0m/min
Coecient of friction
Mating materialS45C
surface roughness 3mRy
60
Technical
Information
Bearing dimension4050R30
40
Durability cycle103cycle
Lubricationgrease is applied at
assembly
Testing conditions
20
Slide Shifter
Durability cycle100,000cycle
Air Bearings
Bearing dimension3038R45
Coecient of friction
Pressure kgf/cm2
Metallic Bearing
Atmosphereatmospheric air,
In water
20 to 47
0.20
Multi-layer Bearing
Coecient of friction
Plastic Bearing
48M-20
48M-30
48M-40
48M-50
Diameter
Product
Information
90
81-12
Product
Information
Selection Guide
Oiles 81
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Serviceable without the need for lubrication.
Features low coecient of friction and superior impact resistance performance.
Demonstrates superior wear resistance in abrasive conditions due to foreign
matter, coarse surfaces of mating parts, rust, etc.
Injection-molded and can be made in complicated shapes. Has good mass
productivity.
Service range
81-12
Lubrication condition
Dry
6060
6060
5.051
3.031
0.2515
0.5030
0.80489
0.80489
2
kgf/cm2
Allowable max. pressure P N/mm
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
91
81-20
Specific gravity
ASTM D 792
Tensile strength
ASTM D 638
2
2
N/mmkgf/cm
81-12
81-20
1.00
0.97
26.5270
32.4330
200
10
Flexural property
ASTM D 790
2
2
N/mmkgf/cm
22.5230
33.3340
Flexural modulus
ASTM D 790
2
2
N/mmkgf/cm
98010,000
1,55015,800
ASTM D 695
2
2
N/mmkgf/cm
8.385
10.8110
26.5270
26.5270
Compressive stress
1% deformation
10% deformation
Hardness
ASTM D 785
HRR35
HRR60
ASTM D 256
J/mkgfcm/cm
14715.0
98.110.0
ASTM D 696
105 1
1113
1113
ASTM D 648
85
Melting point
DSC
137
130Note 1
UL incombustibility
UL94
File No.E78113
HB
The values shown above are typical values, not the standard values.
Note 1values by vicat softening point (ASTM D 1525)
Selection Guide
Velocity0.130m/s
7.8m/min
120rpm
Test time200hrs.
0.20
0.15
Product
Information
Bearing dimension3538R20
Coecient of friction
0.10
Oiles 81-20
No oiling
0.05
0
Oiles 81-20
Initial greasing
40
80
120
160
200
Test time
hrs.
Multi-layer Bearing
Polyacetal type
Testing conditions
Oiles 81-20
Mating materialSUS303
surface roughness 1.6mRy
10
2
2
Pressure1.96N/mm20.0kgf/cm
15
20
25
30
Metallic Bearing
Wear amount
m
Velocity0.047m/s
2.8m/min
90rpm
0.40
0.30
0.20
Air Bearings
Coecient of friction
Test time250hrs.
Polyacetal
0.10
Oiles 81-20
50
Plastic Bearing
100
150
250
Slide Shifter
Test time
hrs.
200
Technical
Information
Corporate Profile
92
Selection Guide
Product
Information
Oiles 83
Service range
83-24
Dry
40140
40140
10.0102
19.5199
0.3521
0.3521
1.00612
2.451,500
2
kgf/cm2
Allowable max. pressure P N/mm
Thrust test
Testing condtions
Slide Shifter
Velocity0.083m/s
5m/min
0.033m/s
2m/min
Test time50hrs.
0.20
0.10
0
10
20
30
40
50
Coecient of friction
Technical
Information
Corporate Profile
mating materialS45CDry
mating materialS45CGrease lubrication
0.30
Lubricationgrease lubrication,
Dry
93
83-90
Lubrication condition
Coecient of friction
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
mating materialS45CDry
mating materialS45CGrease lubrication
0.30
0.20
0.10
0
10
20
30
40
50
83-90
1.23
1.40
80.4820
1171,190
ASTM D 792
Tensile strength
ASTM D 638
ASTM D 638
Flexural property
ASTM D 790
2
2
N/mmkgf/cm
1231,250
1901,940
Flexural modulus
ASTM D 790
2
2
N/mmkgf/cm
2,84029,000
6,76069,000
ASTM D 695
2
2
N/mmkgf/cm
38.2390
1081,100
Compressive stress
1% deformation
10% deformation
2
2
N/mmkgf/cm
ASTM D 785
HRM80
HRM86
ASTM D 256
J/mkgfcm/cm
646.5
ASTM D 696
105 1
24
ASTM D 698
176
213
Melting point
DSC
292
225
UL incombustibility
UL94
File No.E78113
HB
Multi-layer Bearing
Hardness
Plastic Bearing
Specific gravity
Product
Information
83-24
Selection Guide
The values shown above are typical values, not the standard values.
Metallic Bearing
Oscillating cycle10cpm
0.20
0.10
20
40
60
80
100
Oscillating angle35
Air Bearings
2
2
Pressure19.6N/mm200.0kgf/cm
Velocity0.007m/s
0.42m/min
Coecient of friction
Testing conditions
Bearing dimension125140R32
Mating materialS45C
Velocity0.004m/s
0.24m/min
Oscillating cycle6cpm
Oscillating angle18
Oscillating frequency100,000cycle
Lubricationgrease is applied
at assembly
60
40
20
0
10
30
50
70
20
40
60
80
Oscillating frequency
103cycle
90
100
10
30
50
70
20
40
60
80
Oscillating frequency
103cycle
90
100
0.50
0.40
0.30
0.20
0.10
0
Corporate Profile
Test time278hrs.
80
Technical
Information
2
2
Contact pressure13.4N/mm137.0kgf/cm
Coecient of friction
100
Slide Shifter
Lubricationgrease is applied
at assembly
Bearing temperature
Test time100hrs.
94
88-02
Product
Information
Selection Guide
Oiles 88
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
95
Service range
88-02
88-71
Lubrication condition
Dry
40140
40140
14.5148
17.5179
0.8551
0.8551
2.451,500
2.451,500
ASTM D 792
Tensile strength
ASTM D 638
2
2
N/mmkgf/cm
88-02
88-71
1.35
1.20
37.3380
55.4565
30
30
Flexural property
ASTM D 790
2
2
N/mmkgf/cm
57.8590
79.9815
Flexural modulus
ASTM D 790
2
2
N/mmkgf/cm
1,76018,000
2,16022,000
ASTM D 695
2
2
N/mmkgf/cm
13.7140
22.1225
49.0500
86.8885
Compressive stress
1% deformation
10% deformation
Hardness
ASTM D 785
HRM52
HRM80
ASTM D 256
J/mkgfcm/cm
49.05.0
11812.0
105 1
612
56
Melting point
DSC
224
220
UL incombustibility
UL94
File No.E78113
HB
The values shown above are typical values, not the standard values.
Selection Guide
Velocity0.083m/s
5.0m/min
Test time50hrs.
Lubricationdry
0.25
0.20
Product
Information
0.15
0.10
Wear amount
0.018mm
0.05
0
10
20
30
50
Coecient of friction
Velocity0.028m/s
1.67m/min
Oscillating cycle60cpm
Oscillting angle20
80
100
0.30
0.20
0.10
0
20
40
60
Test time
hrs.
Oiles 88 Elastomer
Polyester elastomer
Tensile strength
ASTM D 638
88-91
2
2
N/mmkgf/cm
2
2
ASTM D 6301 N/mmkgf/cm
1.22
33.3340
400
Technical
Information
Specific gravity
Slide Shifter
Among thermo-plastic elastomer, the Oiles 88 elastomer features superior high temperature characteristics and
is applicable to wide temperature range from low to high temperatures.
Has superior wear resistance. Demonstrates outstanding resistance against abrasive wear caused by dust and
coarse mating surface, in particular.
Has rubber elasticity and exibility, superior impact resistance, and large noise suppressing and vibration-proof
eects.
Features superior oil resistance, chemical resistance and aging resistance among elastomer type exible plastic.
Air Bearings
Feature
Metallic Bearing
Test time100hrs.
Tear strength
Multi-layer Bearing
40
Test time
hrs.
Plastic Bearing
Coecient of friction
Thrust test
15.7160
ASTM D 2240
Shore D
57
ASTM D 1525
190
Melting point
DSC
212
Corporate Profile
Hardness
96
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Oiles 88-03
Feature
Service range
Lubrication condition
Dry
40120
2
kgf/cm2
Allowable max. pressure P N/mm
9.81100
1.67100
0.327200
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
97
Specific gravity
ASTM D 792
1.27
Tensile strength
ASTM D 638
MPakgf/cm2
49.6505.8
4.2
ASTM D 790
MPakgf/cm2
79.9814.8
Flexural modulus
ASTM D 790
MPakgf/cm2
2,57826,288
ASTM D 695
MPakgf/cm2
ASTM D 695
MPakgf/cm2
2,17522,179
Hardness
ASTM D 785
HRM72.5
Compressive stress
1% deformation
10% deformation
22.8232.5
71.8732.2
27.72.8
ASTM D 256
0.05
68
105 1
1017
File No.E78113
HB
UL incombustibility
UL94
The values shown above are typical values, not the standard values.
Selection Guide
Others PA bearing
Testing conditions
88-03
0.05
0.25
0.3
0.4
Plastic Bearing
Test time200h
intermittent, 12s ON and 1s OFF
Coecient of friction
0.5
Velocity0.25m/s
15m/min
Lubricationdry
0.1
0.15
0.2
Wear amount
mm
0.3
Others PA bearing
0.2
88-03
0.1
50
100
150
200
250
Test timeh
Testing conditions
4
6
Wear amount
mg
10
0.4
0.3
Air Bearings
Coecient of friction
0.5
Velocity0.17m/s
10m/min
Lubricationdry
Metallic Bearing
1.6 88-03
Bearing dimension101410
Test time50h
8.7
Multi-layer Bearing
2
2
Pressure0.98N/mm10kgf/cm
Product
Information
0.005
Bearing dimension101410
0.238
0.2
88-03
0.1
0
10
20
30
40
50
Slide Shifter
Test timeh
Technical
Information
Corporate Profile
98
Feature
Serviceable without the need for lubrication completely.
Features low static coefficient of friction when starting and causes no stick slips in operation.
Features wear resistance and maintains low coefficient of friction under high-speed conditions.
Applicable to wide temperature ranges from low to high temperatures.
Has superior chemical resistance. Conforms to the Food Sanitation Act.
Soft metal (such as aluminum) may be used as mating shafts.
Has superior cutting and machining characteristics.
Standard products and materials for machining are available in various sizes.
Lathe turning
Service range
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
99
carbide toolJIS
Dry
Cutting tool
Metallic Bearing
Lubrication condition
200200
2
kgf/cm2
Allowable max. pressure P N/mm
7.071
Relief angle
510
Rake angle
1020
1.6599
Nose radiusmm
0.200.40
1.00612
Speed m/min
100250
Cut depth mm
0.100.50
Feed mm/rev
0.050.20
Condition
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Oiles Glitron F
ASTM D 792
Tensile strength
ASTM D 638
2
2
N/mmkgf/cm
ASTM D 638
2.25
13.1134
150
1% deformation
Compressive stress
ASTM D 695
10.5107
2
2
N/mmkgf/cm
10% deformation
23.0235
Hardness
ASTM D 785
HRR25
ASTM D 696
105 1
911
254
96
Melting point
DSC
327
Volume resistivity
ASTM D 257
mcm
3.043.04102
Surface resistivity
ASTM D 257
8.35102
The values shown above are typical values, not the standard values.
O.D.
Length
Selection Guide
Mating materialSUS303
surface roughness1.2mRy
2
2
Pressure1.96N/mm20.0kgf/cm
Velocity0.500m/s
30.0m/min
0.3
Other PTFE bearings
0.2
Oiles Glitron F
0.1
0
0
Lubricationdry
20
40
60
80
100
Mating materialSUS303
surface roughness 1.2mRy
Velocity0.667m/s
40.0m/min W
Lubricationdry
6.12103
105
PV1.308
800
PV0.326
200
PV0.654
400
6.12104
106
6.12105
107 0
PV0.981
600
0.49
5
0.98
10
1.47
15
2
N/mm
Pressure kgf/cm2
1.96
20
2.45
25
Metallic Bearing
Pressue0.49 to 1.96N/mm2
5.0 to 20.0kgf/cm2
2
2
Bearing dimension1014R10
Testing conditions
N/mm m/s
PV value kgf/cm2
m/min
6.12102
104
Multi-layer Bearing
N/mm m/sh
mm/
mm/
kgf/cm m/minh
Test time
hrs.
Plastic Bearing
Test time100hrs.
0.4
Product
Information
Bearing dimension1014R10
Coecient of friction
Test data
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
100
Selection Guide
77B
77B - 0910
Parts No.
Bushing
Mating shaft
Housing
H7
0.8
h6
Product
Information
Motion
direction
chamfer
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
101
Multi-layer Bearing
Plastic Bearing
6.3
a: Chamfering mm
6
18 50
d
a
C0.3 C0.5 C0.8
I.D.
d Tolerance D Tolerance
3
4
5
6
7
8
9
10
12
15
16
17
18
20
25
30
40
50
0.183
0.133
0.183
0.133
0.183
0.133
0.186
0.136
0.198
0.148
0.202
0.152
0.205
0.155
0.215
0.165
0.218
0.168
0.240
0.170
0.240
0.170
0.250
0.180
0.250
0.180
0.310
0.190
0.310
0.190
0.310
0.190
0.340
0.200
0.350
0.210
Length LTolerance00.25
00.2
O.D.
6
7
8
9
11
12
13
14
16
21
22
23
24
26
31
36
48
60
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.10
0.05
0.10
0.05
0.10
0.05
0.10
0.05
0.10
0.05
0.10
0.05
10
0303 0305
0405 0406 0408
0505 0506 0508 0510
0605 0606 0608 0610
0708
0808 0810
0910
1008 1010
1210
1510
15
20
25
30
40
50
0.10
0.05
0.10
0.05
0.10
0.05
0.11
0.06
0.11
0.06
0.11
0.06
0.11
0.06
0.11
0.06
0815
1015
1215
1515
1615
1715
1815
2015
1220
1520
1620 1625
1820
2020 2025 2030
2520 2525 2530
3020 3025 3030
4030 4040
5040 5050
I.D.
tolerance
after press
fitting
(reference)
0.124
0.074
0.126
0.076
0.126
0.076
0.129
0.079
0.132
0.082
0.136
0.086
0.139
0.089
0.149
0.099
0.152
0.102
0.176
0.106
0.176
0.106
0.186
0.116
0.186
0.116
0.236
0.116
0.238
0.118
0.238
0.118
0.268
0.128
0.280
0.140
77F
Selection Guide
77F - 0910
Parts No.
Mating shaft
Bushing
Housing
H7
h6
F
D
d
0.8
6.3
chamfer
Plastic Bearing
a: Chamfering mm
6
18 50
d
a
C0.3 C0.5 C0.8
R0.2
b
0
t +0.1
O.D.
d Tolerance D Tolerance F
0.183
0.133
0.183
0.133
0.183
0.133
0.186
0.136
0.198
0.148
0.202
0.152
0.205
0.155
0.218
0.168
0.240
0.170
0.240
0.170
0.250
0.180
0.250
0.180
0.310
0.190
0.310
0.190
0.340
0.200
0.09
0.04
0.09
0.04
0.10
0.05
0.10
0.05
0.10
0.05
0.10
0.05
0.10
0.05
0.10
0.05
0.10
0.05
0.10
0.05
0.10
0.05
0.11
0.06
0.11
0.06
0.11
0.06
0.11
0.06
0.11
0.06
9
9
11
12
15
16
17
18
20
27
28
29
30
32
37
42
56
70
10
15
20
25
30
40
50
1.5 0305
1.5
0406 0408
1.5
0506 0508 0510
1.5
0606 0608 0610
2.0
0710
2.0
0806 0808 0810 0815
2.0
0910
2.0
1008 1010 1015
2.0
1210 1215 1220
3.0
1510 1515 1520
3.0
1610 1615 1620 1625
3.0
1720
3.0
1815 1820
3.0
2015 2020 2025
3.0
2520 2525 2530
3.0
3020
3030
4.0
4030 4040
5.0
5040 5050
0.124
0.074
0.126
0.076
0.126
0.076
0.129
0.079
0.132
0.082
0.136
0.086
0.139
0.089
0.149
0.099
0.152
0.102
0.176
0.106
0.176
0.106
0.186
0.116
0.186
0.116
0.236
0.116
0.238
0.118
0.238
0.118
0.268
0.128
0.280
0.140
Corporate Profile
0.350
0.210
0.09
0.04
Technical
Information
0.310
0.190
0.09
0.04
Slide Shifter
0.215
0.165
6
7
8
9
11
12
13
14
16
21
22
23
24
26
31
36
48
60
I.D.
tolerance
after press
fitting
(reference)
Air Bearings
3
4
5
6
7
8
9
10
12
15
16
17
18
20
25
30
40
50
Length LTolerance00.25
00.2
Flange
Metallic Bearing
I.D.
Multi-layer Bearing
Product
Information
Motion
direction
102
Selection Guide
77M
77M - 28
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Parts No.
Parts No.
77M-5
77M-7
77M-9
77M-12
77M-14
77M-16
77M-19
77M-24
77M-28
Diameter
Length
D Tolerance
5
7
9.6
12.5
14.4
16.3
19.2
24
28.8
77SH
1.5
0.5
Parts No.
77M-33
77M-38
77M-49
77M-58
77M-68
77M-82
77M-88
77M-98
500
500
500
500
500
500
500
500
500
1.0
0.3
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
Diameter
Length
D Tolerance
33.6
38.4
49
58
68
82
88
98
2.0
0
4.0
0
4.0
0
2.0
0
2.0
0
2.0
0.5
2.0
0
2.0
0
500
500
100
100
100
100
100
100
Custom-made product
Custom-made product
77SH - 100033
Corporate Profile
Technical
Information
103
Slide Shifter
Parts No.
Applications
Washers, slide tape, other machinery parts
Parts No.
77SH-500210
77SH-1000310
77SH-150055
77SH-200085
77SH-200105
Width
W Tolerance T Tolerance Lm
50
100
150
200
200
5
0
5
0
5
0
5
0
5
0
0.2
0.3
0.5
0.8
1.0
0.05
0.05
0.05
0.05
0.1
10
10
5
5
5
Parts No.
Width
W Tolerance T Tolerance Lm
50
77SH-50121
77SH-100151 100
77SH-100201 100
5
0
5
0
5
0
Gritron F itself is erectrically coductive, and conforms to the Food Sanitation Act.
In addition to Gritorn F, Ultrahight molecular weight polyethylene sheet (white color) is also available in same dimention.
1.2
1.5
2.0
0.1
0.1
0.1
1
1
1
Unit: 1m
Selection Guide
77S
77S - 68117
Parts No.
I.D.
Parts No.
O.D.
d Tolerance D Tolerance
11
19
19
0
1.0
20
33
40
0
1.0
0
1.0
2.0
0
2.0
0
2.0
0
L
500
500
500
I.D.
Parts No.
d Tolerance D Tolerance
58
68
78
1.0
0
0
1.0
1.0
0
118
117
156
2
0
2
0
2
0
Length
L
100
100
100
Metallic Bearing
77S-58118
77S-68117
77S-78156
Air Bearings
77P - 2006
Parts No.
77P
O.D.
Multi-layer Bearing
Thick type
Plastic Bearing
77S-1120
77S-1933
77S-1940
Length
Product
Information
77P-2006
77P-2011
Width
Thickness Length
W Tolerance T Tolerance
200
200
10.0
0
10.0
0
6
11
2.0
0
2.0
0
L
200
200
Technical
Information
Parts No.
Slide Shifter
Corporate Profile
104
Electrically conductive
Glitron SE
Product
Information
Selection Guide
Glitron S
Glitron SE
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
105
Service range
Lubrication condition
Service temperature range
Dry
60200
2
kgf/cm2
Allowable max. pressure P N/mm
14.5148
2.50150
0.65398
Specific gravity
ASTM D 792
Tensile strength
ASTM D 638
2
2
N/mmkgf/cm
Glitron SE
1.6
1.6
53.9550
41.3421.1
2.50
0.99
ASTM D 790
2
2
N/mmkgf/cm
83.3850
62.9641.6
Flexural modulus
ASTM D 790
2
2
N/mmkgf/cm
3,43035,000
3,43035,000
2
2
N/mmkgf/cm
68.6700
72.4739
HRR110
HRR116
14.71.50
15.21.55
105 1
Hardness
ASTM D 785
150
167
Melting point
DSC
281
281
Volume resistivity
ASTM D 257
mcm
Surface resistivity
ASTM D 257
1.67105
UL incombustibility
UL94
File No.E78113
V-0
V-0
Metallic Bearing
The values shown above are typical values, not the standard values.
2
4
2.4102.410
Multi-layer Bearing
Plastic Bearing
Flexural property
Product
Information
Glitron S
Selection Guide
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
106
Oiles Glitron SE
Testing conditions
Bearing dimension1014R10
Multi-layer Bearing
Plastic Bearing
0.9
0.8
0.7
0.6
0.5
0.4
Oiles Glitron SE
0.3
0.2
0.1
0
Testing conditions
20
30
40
50
60
Mating materialSUS303
surface roughness 1.2mRy
Velocity0.167m/s
10.0m/min
Lubricationdry
0.3
0.2
Oiles Glitron S
0.1
Oiles Glitron SE
conductive
Air Bearings
0.98
1.96
2.94
3.92
4.90
5.88
6.86
10 20 30 40 50 60 70
2
N/mm
Oiles Glitron S
Testing conditions
Oiles Glitron SE
Mating materialSUS303
surface roughness 1.2mRy
2
2
Pressure0.98N/mm10.0kgf/cm
Test time20hrs.
Lubricationdry
10
15
20
25
30
35
Wear amountm
Coecient of friction
Slide Shifter
10
Test time
hrs.
Velocity0.333m/s
20.0m/min
Technical
Information
0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Wear amount
mm
Coecient of friction
Velocity1.049m/s
2,000rpm
62.8m/min
Thrust test
Corporate Profile
cannot be measured
2
2
Pressure0.245N/mm2.5kgf/cm
Lubricationdry
107
0.032
Mating materialSUS440
surface roughness 0.2a
Test time60hrs.
Metallic Bearing
Test data
Coecient of friction
Selection Guide
Product
Information
0.3
0.2
Oiles Glitron SE
0.1
Oiles Glitron S
0.5
10
Test time
hrs.
15
20
Selection Guide
Test data
High temperature journal rotation test
0.9
Oiles Glitron S
1.1
Testing conditions
Oiles Glitron SE
2
2
Pressure0.98N/mm10.0kgf/cm
Velocity0.06m/s
3.6m/min
Atmospheric temperature160
7.9
6.6
Wear amount
mg
Product
Information
Mating materialaluminium
A5056
Lubricationdry
0.20
Others conductive PPS bearing
Plastic Bearing
0.15
Oiles Glitron SE
Other PPS bearing
0.10
0.05
0
Oiles Glitron S
20
40
60
80
100
Testing conditions
Mating materialSUS303
surface roughness 2.5mRy
2
2
Pressure0.49N/mm5.0kgf/cm
Veloctiy0.67m/s
40.0m/min
Lubricationdry
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
20
40
60
Test time
hrs.
80
100
Air Bearings
Test time100hrs.
Metallic Bearing
Coecient of friction
Test time
hrs.
Multi-layer Bearing
Coecient of friction
Test time100hrs.
Slide Shifter
Technical
Information
Corporate Profile
108
Selection Guide
GEB
GEB - 1010
Parts No.
Mating shaft
Bushing
Housing
H7
D
d
0.8
g6
Product
Information
Motion
direction
6.3
Plastic Bearing
L
Type A
Type B
1.5
3-1.5
Metallic Bearing
Air Bearings
Slide Shifter
0.3
Detailed X
Parts No.
Technical
Information
C0.3
0.8
0.3
Multi-layer Bearing
GEB-0305
GEB-0405
GEB-0505
GEB-0605
GEB-0808
GEB-1010
GEB-1210
GEB-1515
GEB-1615
GEB-2020
GEB-2525
GEB-3030
I.D.
Tolerance
0.070
0.040
0.070
0.040
0.070
0.040
0.070
0.040
O.D.
Length
Tolerance
0.052
0.012
0.055
0.015
0.055
0.015
0.055
0.015
0.075
0.040
10
0.095
0.060
12
0.100
0.060
15
0.100
0.060
16
0.100
0.060
20
0.110
0.060
25
0.110
0.060
30
0.130
0.060
Tolerance
0
0.10
0
0.10
0
0.10
0
0.10
12
0.068
0.018
0
0.10
14
0.068
0.018
10
0
0.10
16
0.068
0.018
10
0
0.10
19
0.068
0.018
15
0
0.15
20
0.071
0.021
15
0
0.15
25
0.081
0.021
20
0
0.15
30
0.081
0.021
25
0
0.15
35
0.095
0.025
30
0
0.20
Corporate Profile
The inner diameter tolerances are the values after pressing into a ring gauge of D 0.002.
109
Type
GEF
Selection Guide
GEF - 1008
Parts No.
Mating shaft
Bushing
Housing
Product
Information
H7
F
D
d
0.8
g6
Motion
direction
6.3
Plastic Bearing
t
L
Type A
2
Type B
3-2
Type C
2-2
3-R
0.3
2-R
R0.1 or less
CAV NO.
2-C0.3
Metallic Bearing
t
L
Parts No.
O.D.
d Tolerance D Tolerance
3
0.070
0.040
0.070
0.040
0.070
0.040
0.070
0.040
0.055
0.015
0.055
0.015
0.055
0.015
0.075
0.040
10
0.095
0.060
12
0.100
0.060
15
0.100
0.060
16
0.100
0.060
20
0.110
0.060
25
0.110
0.060
30
0.130
0.060
Tolerance F Tolerance
Type
Tolerance
1.5
0
0.10
3.0
0
0.10
10
0
0.10
1.5
0
0.10
3.5
11
0
0.10
1.5
0
0.10
4.0
12
0
0.10
1.5
0
0.10
4.5
0
0.10
16
0
0.10
2.0
0
0.10
5.5
0
0.10
18
0
0.10
2.0
0
0.10
6.5
0
0.10
20
0
0.10
2.0
0
0.10
7.5
23
0
0.10
2.0
0
0.10
9.0
0
0.10
0
0.10
0
0.10
0
0.10
12
0.068
0.018
14
0.068
0.018
16
0.068
0.018
19
0.068
0.018
20
0.071
0.021
25
0.081
0.021
30
0.081
0.021
35
0.095
0.025
10
0
0.10
10
0
0.10
24
0
0.10
2.0
0
0.10
9.5
12
0
0.15
30
0
0.15
2.5
0
0.15
11.5
15
0
0.15
35
0
0.20
2.5
0
0.15
14.0
20
0
0.20
40
0
0.20
2.5
0
0.15
16.5
Technical
Information
0.052
0.012
Flange
Slide Shifter
Length
Air Bearings
GEF-0304
GEF-0404
GEF-0505
GEF-0605
GEF-0806
GEF-1008
GEF-1208
GEF-1510
GEF-1610
GEF-2012
GEF-2515
GEF-3020
I.D.
Multi-layer Bearing
C0.3
The inner diameter tolerances are the values after pressing into a ring gauge of D 0.002.
Corporate Profile
110
Selection Guide
GSB
GSB - 051004
h7
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
chamfer
2-C0.3
2-C0.3
2-C0.3
0.3
1.5
Section A-A
Parts No.
Corporate Profile
6.3
Type B
2-C0.3
111
0.8
Type A
Housing
Bushing
H7
Mating shaft
Motion
direction
Plastic Bearing
Product
Information
Parts No.
GSB-031004
GSB-040803
GSB-041004
GSB-041104
GSB-041204
GSB-051004
GSB-051105
GSB-051405
GSB-051605
GSB-061003
GSB-061204
GSB-061305
GSB-061505
GSB-081235
GSB-081404
GSB-081605
GSB-082207
I.D.
O.D.
Length
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
0.09
0.04
10
8
10
11
12
10
11
14
16
10
12
13
15
12
14
16
22
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
4
3
4
4
4
4
5
5
5
3
4
5
5
3.5
4
5
7
Type
Ball bearing
part code
0
0.1
71.674,300
121.2
623
0
0.1
53.333,200
121.2
0
0.1
53.333,200
161.6
0
0.1
53.333,200
161.6
694
0
0.1
53.333,200
161.6
604
0
0.1
41.672,500
202.0
0
0.1
41.672,500
252.6
685
0
0.1
41.672,500
252.6
605
0
0.1
41.672,500
252.6
625
0
0.1
35.002,100
181.8
676
0
0.1
35.002,100
242.4
0
0.1
35.002,100
293.0
686
0
0.1
35.002,100
293.0
696
0
0.1
26.671,600
272.8
678
0
0.1
26.671,600
313.2
0
0.1
26.671,600
394.0
0
0.1
26.671,600
555.6
608
GSF
Selection Guide
GSF - 051004
Parts No.
Mating shaft
Housing
H7
h7
F
D
d
0.8
Bushing
Type A
6.3
chamfer
Type B
R0.1 or less
2-C0.3
C0.3
2-C0.3
Parts No.
Section A-A
O.D.
Length
Flange
0.09
0.04
0.09
0.04
0.09
0.04
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
3
4
4
4
4
5
4
3
4
5
5
3.5
4
5
7
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0.6
1.0
1.0
1.0
0.8
1.0
1.0
0.6
0.8
1.1
1.2
0.8
0.8
1.0
1.5
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
2.8
3.0
3.5
4.0
3.8
4.6
5.0
5.6
53.333,200 121.2
53.333,200 161.6
684
53.333,200 161.6
694
53.333,200 161.6
604
41.672,500 202.0
41.672,500 252.6
685
41.672,500 202.0
695
35.002,100 181.8
35.002,100 242.4
35.002,100 293.0
686
35.002,100 293.0
696
26.671,600 272.8
678
26.671,600 313.2
26.671,600 394.0
688
26.671,600 555.6
608
Corporate Profile
9.2
10.3
12.5
13.5
11.6
12.5
15.0
11.2
13.6
15.0
17.0
13.6
15.6
18.0
25.0
t Tolerance
Technical
Information
0.09
0.04
8
9
11
12
10
11
13
10
12
13
15
12
14
16
22
0.05
0
Allowable Allowable
Ball bearing
revolution
load
Type part code
1 rpm
S
Nkgf
Slide Shifter
4
4
4
4
5
5
5
6
6
6
6
8
8
8
8
0.09
0.04
Air Bearings
GSF-040803
GSF-040904
GSF-041104
GSF-041204
GSF-051004
GSF-051105
GSF-051304
GSF-061003
GSF-061204
GSF-061305
GSF-061505
GSF-081235
GSF-081404
GSF-081605
GSF-082207
I.D.
C0.3
Metallic Bearing
0.3
1.5
Multi-layer Bearing
C0.3
R0.1 or less
Plastic Bearing
t
L
Product
Information
Motion
direction
112
Selection Guide
Polyurethane bearings
Product
Information
Oiles 50
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Has superior wear resistance. Demonstrates outstanding resistance against
abrasive wear caused by dust and coarse mating surface, in particular.
Has rubber elasticity and flexibility, superior impact resistance, and large
vibration-proof and noise suppressing effects.
Has superior cold resistance, weather resistance and ozone resistance.
Injection-molded and can be made in complicated shapes.
Types of Oiles 50
Series
Type
Adipate Type
P1000
Technical
Information
Corporate Profile
HardnessNote 1
HDA
HDD
P1085
85
P1090
90
95
46
P1098
98
53
P5085
85
P5090
90
P5095
95
46
Caprolactone Type
P5098
98
53
Polyurethane Elastomer
P5059D
59
P5064D
64
P5068D
68
P5074D
74
P5000
P5000D
Heat
resistant
temp.
Characteristics
Light load
80
P1095
Polyurethane Elastomer
Note 1
hardnessJIS K 7215durometer hardness
113
Kind
Impact resistance
80
Water reisitance
Heat resistance
Heavy load
100
Water reisitance
Heat resistance
Mechanical properties
JIS K 7311
Tensile strength
JIS K 7311
P1095
P1098
1.21
1.22
1.22
1.23
43.1440
43.1440
45.1460
45.1460
610
600
550
550
N/mmkgf/cm
113115
127130
147150
157160
110
118
122
125
P5085
P5090
P5095
P5098
1.17
1.18
1.18
1.19
44.1450
46.1470
47.1480
49.0500
550
500
500
500
N/mmkgf/cm
118120
137140
147150
157160
116
130
131
141
P5059D
P5064D
P5068D
P5074D
1.20
1.21
1.23
1.23
49.0500
51.0520
52.0530
52.0530
450
400
350
350
N/mmkgf/cm
177181
206210
235240
275281
143
145
147
151
2
2
N/mmkgf/cm
JIS K 7311
Plastic Bearing
P1090
The values shown above are typical values, not the standard values.
Tensile strength
JIS K 7311
2
2
N/mmkgf/cm
JIS K 7311
The values shown above are typical values, not the standard values.
JIS K 7311
Tensile strength
JIS K 7311
JIS K 7311
2
2
N/mmkgf/cm
The values shown above are typical values, not the standard values.
Slide Shifter
Air Bearings
Mechanical properties
Metallic Bearing
Multi-layer Bearing
Specific gravitty
Product
Information
Specific gravitty
P1085
Selection Guide
Technical
Information
Corporate Profile
114
Selection Guide
Product
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature of Aramid M
Has superior heat resistance and maintains mechanical characteristics even in
continuous operations at high temperatures.
Easily machinable. Has superior mechanical characteristics and electric insulation.
Has superior performances such as radiant ray resistance, hydrolysis resistance, re
resistance, no gas production in vacuum, etc.
The standard products in various ball shapes and materials for machining are available.
2
2
N/mmkgf/cm
1.3
2352,400
2
2
N/mmkgf/cm
4104
3,923
Water
absorption
rate
JIS K 7209
wt
Heat
resistance
Dry furnace
Solder dip
resistance
JIS C 6481
Co-efficient of
linear expansion
Thermal
conductivity
Tensile elongation
2Note 2
105 1
W/m/k
3.6
12.1103
Hardness
JIS K 7202
2
2
981,000
mcm 3101331015
JIS K 6911
Insulation
breakdown T/P thickness 1mm
kV/mm
25
4.5
0.019
File No.E78113
V-0
2
2
1471,500
UL94
8.91015
HRM123
The values shown above are typical values, not the standard values.
Note 1Weight variation rate when dipped in water for 24 hours
Note 2Saturated dimension variation rate in water (at the room temperature). It is 4% when the water temperature is 50C (122
F) or more. Dimensional
115
Lathe turning
Relief angle
510
Rake angle
510
Nose radiusmm
Condition
carbide tooldiamondJIS
Cutting tool
Corporate Profile
Technical
Information
variation due to water absorption should be taken into consideration when designing.
Speed m/min
60150
Cut depthmm
0.050.10
Feed mm/rev
0.050.20
0.400.80
Attention should be paid to dimensional variances due to thermal expansion, chucking, and bend of the material.
Edges are subject to chipping when machining. Chamfer the edges in advance, apply patch plates, or take other
proper measures.
Contact us for grinding and milling information.
I.D.
O.D.
Length
Selection Guide
Feature of Aramid F1
Product
Information
Inherits the heat resistance and high hardness from the Oiles Aramid M
and features improved wear resistance and low friction characteristics
necessary for bearings.
Has superior heat resistance even in continuous operations at high
temperatures.
105 1 4.430200
Tensile strength JIS K 7161-1, -2 N/mmkgf/cm
Room temp 86.4881
Elongation
1.5
Hardness
2
2
131.51,341
Flexural property ASTM D 256 N/mmkgf/cm
(with notch)
JIS K 7202
HRM115
29.43.0
Multi-layer Bearing
The values shown above are typical values, not the standard values.
2
2
Pressure2.94N/mm30kgf/cm
Velocity0.033m/s
2m/min
Test time50hrs.
LubricationLithium grease
0.20
Metallic Bearing
Testing conditions
Coecient of friction
Test data
Thrust test
wear amount0.006mm
0.10
10
20
30
40
50
Thrust test
Testing conditions
Test time120hrs.
LubricationTurbine oil
0.20
Condensed polyimide
Wear amount0.011mm
0.15
0.10
Oiles Aramid
Wear amount0.010mm
0.05
50
100
120
Test time
hrs.
The Oiles Aramid M shows superior sliding performances in lubricated conditions.
Technical
Information
Slide Shifter
2
2
Pressure2.94N/mm30kgf/cm
Velocity0.033m/s
2m/min
Coecient of friction
Test time
hrs.
Air Bearings
Plastic Bearing
200 57.3584
Corporate Profile
116
Selection Guide
AMM
AMM - 20
Corporate Profile
Technical
Information
117
AMM-08
AMM-10
AMM-15
AMS
Diameter
Length
D Tolerance
8
10
15
2.5
0
2.5
0
2.5
0
Parts No.
AMM-20
AMM-30
AMM-40
AMM-50
AMM-60
100
100
100
Diameter
Length
D Tolerance
20
30
40
50
60
2.5
0
200
200
200
200
200
2.5
0
2.5
0
2.5
0
2.5
0
AMS - 2060
Parts No.
Parts No.
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Parts No.
Parts No.
AMS-1030
AMS-2060
AMS-50100
AMS-100160
I.D.
O.D.
d Tolerance D Tolerance
10
20
50
100
1.0
3.0
1.0
3.0
1.0
3.0
1.0
3.0
30
60
100
160
3.0
1.0
3.0
1.0
3.0
1.0
3.0
1.0
Length
L
35
35
35
35
AMD
Selection Guide
AMD - 60
Parts No.
Product
Information
D Tolerance
30
60
100
160
3.0
1.0
35
35
35
35
3.0
1.0
3.0
1.0
3.0
1.0
Metallic Bearing
AMP
Length
Multi-layer Bearing
AMD-30
AMD-60
AMD-100
AMD-160
Diameter
Plastic Bearing
Parts No.
Air Bearings
AMP - 10020020
Parts No.
Slide Shifter
L
W
Length
Thickness
5.0
1.0
5.0
1.0
5.0
1.0
5.0
1.0
5.0
1.0
100
100
200
200
200
5.0
1.0
5.0
1.0
5.0
1.0
5.0
1.0
5.0
1.0
10
15
15
20
30
3.0
1.0
3.0
1.0
3.0
1.0
3.0
1.0
3.0
1.0
Maximum thickness is 60mm for the width of 100 and 200mm types.
Parts No.
AMP-20020020
AMP-20020030
AMP-12030020
AMP-12030030
Width
Length
Thickness
5.0
1.0
5.0
1.0
5.0
1.0
5.0
1.0
200
200
300
300
5.0
1.0
5.0
1.0
15.0
5.0
15.0
5.0
20
30
20
30
3.0
1.0
3.0
1.0
3.0
1.0
3.0
1.0
Corporate Profile
AMP-10010010
AMP-10010015
AMP-10020015
AMP-10020020
AMP-10020030
Width
Technical
Information
Parts No.
118
Selection Guide
ABG
ABG - 55
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
119
Product
Information
Parts No.
Parts No.
ABG-31
ABG-39
ABG-55
ABG-71
ABG-95
ABG-127
Diameter D
inch
mm
1/8
5/32
7/32
9/32
3/8
1/2
3.175
3.969
5.556
7.144
9.525
12.700
Sphericity
Lot diameter
Tolerance variation (max)
max
50m
50m
50m
50m
50m
50m
5m
5m
5m
7m
7m
7m
10m
10m
10m
15m
15m
15m
Selection Guide
AF1M
AF1M - 20
Parts No.
Product
Information
D Tolerance
8
10
15
2.5
0
2.5
0
2.5
0
Parts No.
Diameter
Length
D Tolerance
AF1M-20
AF1M-30
AF1M-40
AF1M-50
AF1M-60
100
100
100
20
30
40
50
60
AF1D - 100
2.5
0
2.5
0
2.5
0
200
200
200
200
200
Slide Shifter
Parts No.
Diameter Thickness
D Tolerance
100
160
3.0
1.0
3.0
1.0
T
35
35
Technical
Information
AF1D-100
AF1D-160
2.5
0
Air Bearings
Parts No.
2.5
0
Metallic Bearing
AF1D
Length
Multi-layer Bearing
AF1M-08
AF1M-10
AF1M-15
Diameter
Plastic Bearing
Parts No.
Corporate Profile
120
Phenolic bearings
Product
Information
Selection Guide
Oiles 250
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Reduces the frequency of lubrication.
Maintains oil film, resulting in improved wear resistance.
Has superior foreign matter immersion characteristics, impact resistance, and
noise suppressing characteristics.
Has superior chemical resistance and corrosion resistance.
Materials for machining are also available.
Service range
Lubrication condition
Periodic lubrication
Oil lubrication
40100
2
kgf/cm2
Allowable max. pressure P N/mm
20204
3.35201
15.00900
2.451,500
3.251,990
Corporate Profile
Technical
Information
Slide Shifter
121
Lathe turning
Relief angle
510
Rake angle
510
Nose radiusmm
Condition
diamond
JIS
carbide toolJIS
Cutting tool
Air Bearings
I.D.
O.D.
Length
Speed m/min
60150
Cut depthmm
0.050.10
Feed mm/rev
0.050.20
0.400.80
Attention should be paid to dimensional variances due to thermal expansion, chucking, and
bend of the material.
Contact us for grinding and milling information.
250-03
250-06
250-07
250-17
1.31.4
1.31.4
1.31.4
1.31.4
JIS K 6911
Tensile strength
JIS K 6911
2
2
N/mmkgf/mm
454.6
505.1
11011.2
959.7
2
2
N/mmkgf/mm
707.1
10010.2
11011.2
10510.7
2
2
N/mmkgf/mm
12412.7
19519.9
JIS Z 2507
2
2
N/mmkgf/mm
505.1
12412.7
17517.9
16516.8
Hardness
JIS K 6911
HRM91
HRM60
HRM95
HRM100
Izod impact
strength
(with notch)
JIS K 6911
J/mkgf cm/cm
78.58
19620
15716
18619
105 1
23
23
23
23
Co-efficient of
linear expansion ASTM D 696
Swelling rate
Shape of base
sheet
sheet
sheet
Test data
0.6
Velocity0.014m/s
0.84m/min
Oscillating cycle60cpm
Lubrication 1 1.8 gram lithium grease blended
with 5% foreign particle is applied.
2 Lithium grease 1.8 gram is applied.
0.4
CAC603
LBC3 2
0.3
0.2
Oiles 250 1
0.1
0
Oiles 250 2
Slide Shifter
Oscillating angle10
Wear amount
mm
Bearing dimension4050R30
CAC603
LBC3 1
0.5
Air Bearings
Testing conditions
Metallic Bearing
When chip-shaped base material is used, the tensile strength, compression strength and impact strength are measured at right angles to the
forming direction and the bending strength is measured in parallel with the forming direction. When sheet-shaped base material is used, the
bending strength, compression strength and impact strength are measured at right angles to the layers and the tensile strength is measured in
parallel with the layers.
Multi-layer Bearing
JIS K 6911
Plastic Bearing
Compressive
strength
Radial crushing
strength
Product
Information
Specific gravity
Selection Guide
Sliding distance
103m
Technical
Information
Corporate Profile
122
Product
Information
Selection Guide
Oiles 425
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Has superior wear resistance.
Has superior foreign matter immersion characteristics, impact resistance, and
noise suppressing characteristics.
Has superior chemical resistance, and corrosion resistance.
Usable in water or chemicals.
The 250 material for machining may be used. Contact us about the handling
methods.
Service range
Lubrication condition
underwater
room temperature
2
kgf/cm2
Allowable max. pressure P N/mm
15153
15900
4.903,000
Corporate Profile
Technical
Information
123
Lathe turning
Relief angle
510
Rake angle
510
Nose radiusmm
Condition
diamond
JIS
carbide toolJIS
Cutting tool
Slide Shifter
Air Bearings
I.D.
O.D.
Length
Speed m/min
60150
Cut depthmm
0.050.10
Feed mm/rev
0.050.20
0.400.80
Attention should be paid to dimensional variances due to thermal expansion, chucking, and
bend of the material.
When used in water, fitting must be design considering swelling characteristic. Please add
swelling correction value at page 345-346,when you set a fitting.
Contact us for grinding and milling information.
425-03
425-06
425-07
425-17
1.31.4
1.31.4
1.31.4
1.31.4
JIS K 6911
Tensile strength
JIS K 6911
2
2
N/mmkgf/mm
454.6
505.1
11011.2
959.7
2
2
N/mmkgf/mm
707.1
10010.2
11011.2
10510.7
2
2
N/mmkgf/mm
12412.7
19519.9
JIS Z 2507
2
2
N/mmkgf/mm
505.1
12412.7
17517.9
16516.8
Hardness
JIS K 6911
HRM91
HRM60
HRM95
HRM100
Izod impact
strength
(with notch)
JIS K 6911
J/mkgfcm/cm
78.58
19620
15716
18619
105 1
23
23
23
23
Co-efficient of
linear expansion ASTM D 696
Swelling rate
Shape of base
sheet
sheet
sheet
Test data
0.100
Mating materialSUS420J
surface roughness 3mRy
2
2
Pressure0.4N/mm4.0kgf/cm
Velocity7.5m/s
450.0m/min
Test time50hrs.
0.075
Carbon bearing
0.050
Oiles 425
0.025
10
20
30
Test time
hrs.
40
50
Slide Shifter
CAC403
BC3
Air Bearings
Bearing dimension120150R120
Wear amount
mm
Metallic Bearing
When chip-shaped base material is used, the tensile strength, compression strength and impact strength are measured at right angles to the
forming direction and the bending strength is measured in parallel with the forming direction. When sheet-shaped base material is used, the
bending strength, compression strength and impact strength are measured at right angles to the layers and the tensile strength is measured in
parallel with the layers.
Multi-layer Bearing
JIS K 6911
Plastic Bearing
Compressive
strength
Radial crushing
strength
Product
Information
Specific gravity
Selection Guide
Technical
Information
Corporate Profile
124
Selection Guide
25S
25S - 5374
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
125
D
d
Product
Information
Parts No.
Parts No.
25S-1932
25S-2437
25S-2944
25S-3447
25S-3952
25S-3958
25S-4362
25S-4972
25S-5374
25S-5882
25S-6384
25S-6889
25S-7395
25S-78103
25S-83108
25S-88113
25S-98123
25S-103128
25S-108133
25S-118143
I.D.
O.D.
d Tolerance D Tolerance
19
24
29
34
39
39
43
49
53
58
63
68
73
78
83
88
98
103
108
118
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
32
37
44
47
52
58
62
72
74
82
84
89
95
103
108
113
123
128
133
143
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
2.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
Length
L
500
500
500
500
500
500
500
500
500
500
500
500
500
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Selection Guide
25M
25M - 40
Product
Information
Parts No.
Parts No.
D Tolerance
30
40
50
60
2.0
1.0
L
500
500
500
500
2.0
1.0
2.5
1.0
2.5
1.0
Metallic Bearing
25
Diameter Thickness
Multi-layer Bearing
25M-30
25M-40
25M-50
25M-60
Plastic Bearing
Air Bearings
25P - 2511
Parts No.
Slide Shifter
L
W
Parts No.
Thickness Length
W Tolerance T Tolerance
250
250
250
10.0
1.0
10.0
1.0
10.0
1.0
6
11
21
2.0
0
2.0
0
2.0
0
L
500
500
500
Corporate Profile
25P-2506
25P-2511
25P-2521
Width
Technical
Information
The
126
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Oiles Fiberflon FW
Feature
Serviceable without the need for lubrication. Oers superior performance
under high-load, low-speed conditions.
Tolerates abrasive friction conditions. Also usable under fretting sliding
conditions.
Has superior chemical resistance.
Conforms to the Food Sanitation Act.
The standard products are available in various sizes.
Service range
Lubrication condition
Dry
40120
1001,020
0.159
1.20734
Hardness
1.371.38
2
2
340
34.7
JIS K 6911
Izod impact
strength JIS K 6911
(with notch)
HRM80
J/mkgf cm/cm
93.29.5
105 1
24
Corporate Profile
Technical
Information
2
2
Pressure49.0N/mm500.0kgf/cm
127
Velocity0.0078m/s
0.47m/min
Oscillating cycle5cpm
Oscillating angle45
Test time500hrs.
Lubricationdry
Coeecient of friction
Slide Shifter
Test data
0.5
0.4
0.3
0.2
0.1
0
100
200
300
Test time
hrs.
400
500
FFB
Selection Guide
FFB - 506050
Parts No.
Mating shaft
Bushing
Housing
H7
h7
0.8
1.6
chamfer
Plastic Bearing
12
C 20
Multi-layer Bearing
Product
Information
Motion
direction
C0.5
Metallic Bearing
I.D.
0.162
0.110
0.162
0.110
0.162
0.110
0.192
0.120
0.192
0.120
0.192
0.120
0.224
0.140
0.224
0.140
0.224
0.140
0.073
0.040
0.084
0.045
0.084
0.045
0.084
0.045
0.084
0.045
202820
25
253525
304025
30
202830
253530
304030
354530
405030
0.096
0.050
0.096
0.050
506030
0.096
0.050
0.114
0.060
0.114
0.060
354540
405040
455540
506040
50
60
70
80
405050
506050
506060
607560
708560
607570
708570
8010080
0.114
0.062
0.108
0.056
0.108
0.056
0.138
0.066
0.138
0.066
0.132
0.060
0.132
0.060
0.164
0.080
0.155
0.071
0.155
0.071
Technical
Information
40
Slide Shifter
0.192
0.120
28
35
40
45
50
55
60
75
85
100
20
I.D. tolerance
after press
fitting
(reference)
Air Bearings
d Tolerance D Tolerance
20
25
30
35
40
45
50
60
70
80
O.D.
Corporate Profile
128
Product
Information
Selection Guide
Oiles Fiberflon TR
Service range
Lubrication condition
Dry
40120
Multi-layer Bearing
Plastic Bearing
Feature
Serviceable without the need for lubrication. Has superior wear resistance.
Demonstrates the low coecient of friction of the PTFE plastic as is.
Oers superior performance under high-load, low-speed conditions.
The sliding surface is made of cross-woven fabric hardened rmly with
plastic to improve cold ow, disadvantage of PTFE, remarkably.
Has superior heat, cold and chemical resistance.
Backing materials are selectable according to applications.
May be used in water and seawater.
1001,020
2
N/mm
kgf/cm2
0.15
9
m/sm/min
1.20
734
Metallic Bearing
Radial crushing
145
14.8
2
2
JIS Z 2507 N/mmkgf/mm
strength
roll formed
1.4
2
2
959.7
2
2
11011.2
2
2
19519.9
HRM80
177
18
23
Test data
Journal oscillation test
Testing conditions
Bearing dimension4050R30
Slide Shifter
Mating materialS45C
surface roughness 2mRy
2
2
Pressure49.0N/mm500.0kgf/cm
2
2
34.3N/mm350.0kgf/cm
Velocity0.005m/s
0.31m/min
Oscillating cycle5cpm
Coecient of friction
Air Bearings
The values shown above are typical values, not the standard values.
0.20
Relationship between contact pressure and co-eecient of friection
0.10
2
2
49.0N/mm500.0kgf/cm
Oscillating angle45
129
Test time167hrs.
Clearance0.170mm
Lubricationdry
10
20
30
40
50
Oscillating frequency
103cycle
W
Wear amount
mm
Corporate Profile
Technical
Information
Oscillating frequency50,000cycle
2
2
34.3N/mm350.0kgf/cm
0.10
Relationship between contact pressure and wear amount
0.05
2
2
49.0N/mm500.0kgf/cm
2
2
34.3N/mm350.0kgf/cm
10
20
Oscillating
30
40
frequency
103cycle
50
Service range
Feature
Dry
40120
49100
5001,020
2
N/mm
kgf/cm2
0.159
m/sm/min
1.2734
1.7
16516.8
2
2
23824.3
2
2
12713.0
Swelling rate
0.35
Metallic Bearing
2
2
HRM60
Hardness JIS K 6911
Izod impact strength
(with notch) JIS K 6911 J/mkgfcm/cm 1,010103
Co-efficient of
105 1
58
linear expansion ASTM D 696
Multi-layer Bearing
Plastic Bearing
Lubrication condition
Product
Information
This product is registered in the New Technology Information System (NETIS) managed by MLIT.
Technology name : Solid-lubricant dispersed bearing FIBERFLON OH/Registration
No. : KT-130060-A (for water gates/underwater pumps)
Selection Guide
Oiles Fiberflon OH
The values shown above are typical values, not the standard values.
Air Bearings
0.10
In atmospheric air
In water
20
40
60
80
100
Test timehrs.
0.20
Wear amount in atmospheric air condition 0.023mm
Wear amount in water condition0.015mm
In water
0.10
In atmospheric air
0
20
40
60
Test timehrs.
80
100
Corporate Profile
Testing conditions
Environment: In atmospheric air, In water
Bearing dimension 607550
Mating material SUS403
Pressure 24.5N/mm2
Velocity 0.0084m/s
Oscillating angle 2
Oscillating cycle 120cpm
Test time 100hr
Lubricationdry
Technical
Information
0.20
Slide Shifter
Testing conditions
Environment: In atmospheric air, In water
Bearing dimension 607550
Mating material SUS403
Pressure 24.5N/mm2
Velocity 0.019m/s
Oscillating angle 45
Oscillating cycle 12cpm
Test time 100hr
Lubricationdry
Coecient of friction
Coecient of friction
Test data
130
Product
Information
Selection Guide
Oiles 470-02/02W
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Has self-lubricating performance. Demonstrates low coefficient of
friction and superior wear performance especially in water, chemicals,
or oil.
Demonstrates superior wear per formance and maintains stable
performance even under abrasive conditions subject to soil, sand,
foreign matter or rust on the mating parts.
A multi-layer type (470-02W), which incorporates 470-02 on the sliding
surface and 250 or 425 as the backing material is also available.
The standard split metal for flocculators and bearing units are available
on order.
Service range
Lubrication condition
underwater
4090
2
kgf/cm2
Allowable max. pressure P N/mm
15153
Technical
Information
Slide Shifter
Air Bearings
Corporate Profile
8.154,990
JIS K 6911
Tensile strength
JIS K 6911
2
2
N/mmkgf/mm
454.6
Flexural property
JIS K 6911
2
2
N/mmkgf/mm
757.7
Compressive strength
JIS K 6911
2
2
N/mmkgf/mm
12412.7
JIS K 2507
2
2
N/mmkgf/mm
Hardness
JIS K 6911
HRM103
JIS K 6911
J/mkgfcm/cm
58.86
105 1
22.5
1.0room temp
131
16.5990
Swelling rate
The values shown above are typical values, not the standard values.
1.4
606.1
Compressed
Selection Guide
Test data
0.20
Testing conditions
2
2
Pressure1.96N/mm20.0kgf/cm
Velocity5m/s
300m/min
Test time8hrs.
Atmospherepuried water
0.15
Product
Information
Mating maerialSUS403
Wear amount
mm
0.10
Fiber Reinforced phenol resin bearing
0.05
Testing conditions
Bearing dimension6075R60
2
2
Pressure0.13N/mm1.4kgf/cm
Velocity5.65m/s
339.0m/min
Rotation frequency1,800rpm
0.15
0.10
Oiles 470
0.05
Carbon bearing
Duration250hrs.
Atmospheremuddy water
250
Wear amount
mm
Velocity0.067m/s
4.0m/min
200
Slide Shifter
2
2
Pressure0.49N/mm5.0kgf/cm
150
Air Bearings
Mating materialS45C
100
Test time
hrs.
50
Metallic Bearing
Atmospheremuddy water
500 ppm of testing dust JIS grade
2 and 3 are blended equally
as forreign partcle.
Multi-layer Bearing
Coecient of friction
Test time
hrs.
Plastic Bearing
Oiles 470
Oiles 470
30
60
Technical
Information
Corporate Profile
132
Selection Guide
47H
Made-to-order
47H - 90120120
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
F
D
d
This
This
L1
470-02
The
425-03
water grooves
C3
C2
or
R30
Parts No.
133
L
L2
L1
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Parts No.
47H-6076105
47H-7086105
47H-80105120
47H-90120120
47H-100130140
I.D.
O.D.
d Tolerance D
60
70
80
90
100
0.6
0.2
0.6
0.2
0.8
0.2
0.8
0.2
0.8
0.2
76
86
105
120
130
Flange
F
92
102
130
150
154
Length
L1
L2 Tolerance
0.5
0
2-R1
C2
R1.5 76
0
0.14
0.5
0
0
0.14
0.6
0
2-R1 R30 R4
105
0
0.14
0.6
0
2-R1 R30 R4
120
0
0.14
0.6
0
2-R1
R4
130
0
0.14
8 89
105
8 89
105
120 15 90
120 15 90
140 15 110
C2
Size Tolerance
The inner diameters (d) are the values measured when set in jigs of the minimum recommended housing inner diameters.
The inner diameter of this product will change if it is stored for three months or more. Contact us when placing an order if it will be stored
for three months or more.
Made-to-order
Selection Guide
UPF
UPF - 90
Parts No.
S1
Product
Information
S2
P
A
Material
FC250
FC250
SUS304
SUS304
SUS304
470-02W
Form
70
80
90
100
270
285
330
335
70
70
70
90
L0
105 89
120 90
120 90
140 110
Mounting holeBolt
138 80
158 90
180 100
195 110
S1
S2
30
30
30
35
220
230
270
270
22
22
27
27
27
27
32
32
M20
M20
M24
M24
M10
M10
M10
M12
Slide Shifter
The inner diameter of this product will change if it is stored for three months or more. Contact us when placing an order if it will be stored
for three months or more.
Air Bearings
UPF-70
UPF-80
UPF-90
UPF-100
I.D.
Part
Base
Cover
Bolt
Nut
Knock pin
Bearing
Metallic Bearing
1
2
3
4
5
6
Company
Parts No.
The
This
Multi-layer Bearing
This
Exclusive
Plastic Bearing
L
L0
Technical
Information
Corporate Profile
134
135
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Multi-layer Bearings
Oiles Drymet ST P.137
Oiles Drymet LF P.147
Oiles LF Guides P.160
Oiles Techmet B P.162
Oiles Techmet E P.165
Oiles Toughmet P.166
Oiles Toughmet D P.169
Oiles Hiplast N/E P.175
136
Product
Information
Selection Guide
Oiles Drymet ST
Lathe turning
Service range
Dry
40120
24.5137
2501,400
1.1569
Cutting tool
carbide toolJIS
Lubrication condition
Sliding surface
3.251,990
The values in parentheses are static bearing pressures, which are the bearing pressures
in applications with no motion or very small motion (0.0017m/s[0.1m/min]).
Condition
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Relief angle
510
Rake angle
1020
Nose radiusmm
0.100.20
Speed m/min
60200
Cut depth mm
0.050.10
Feed mm/rev
0.050.20
Corporate Profile
Technical
Information
Slide Shifter
137
Tensile strength
JIS Z 2241
Elongation
JIS Z 2241
27
Hardness
JIS Z 2244
Hv
107
The values shown above are typical values, not the standard values.
The values shown above are values of back metal.
3803,875
O.D.
Length
class 7 (Note 1)
class 8 to 9
Selection Guide
Test data
0.3
Testing conditions
Mating materialS45C
surface roughness 0.6mRy
2
2
Pressure10.3N/mm105.0kgf/cm
Velocity0.922m/s
55.3m/min
Test time80hrs.
Lubricationgrease is applied at assembley
0.2
0.1
20
40
60
80
60
80
0.3
Multi-layer Bearing
0.2
0.1
20
40
Test time
hrs.
Metallic Bearing
Coecient of friction
Test time
hrs.
Plastic Bearing
Product
Information
Bearing dimension4044R30
Wear amount
mm
1.0
Bearing dimension
4044R30
Oiles Drymet ST
4050R30
Oil impregnated sintered
bronze bearing
Mating materialS45C
surface roughness 1.5mRy
2
2
Pressure19.6N/mm200.0kgf/cm
0.8
0.6
Oscillating angle20
50
100
150
200
250
Oscillation frequency
103cycle
Oscillating frequency300,000cycle
Lubricationgrease is applied at assembly
300
Slide Shifter
Oiles Drymet ST
Velocity0.023m/s
1.40m/min
Oscillating cycle100cpm
Air Bearings
Testing conditions
Wear amount
mm
W
Technical
Information
Corporate Profile
138
Selection Guide
Oiles Drymet ST
Load
Mandrel
Dimension of mandrel
Bushing
Figure 1
The dimension of guide ring should be calculated
from table below.
Dimension of bushing Guide ring I.D.
I.D.
D0
d0D0
0.05 to 0.10
Up to 40
O.D.
D1
0.20 to 0.30
d1D1
42 to 60
RL
Over 65
d1
D1
0.2 to 0.5 D1
10 to 15
D1
0.5 to 1.0
d0
Figure 2
D1
0.1 to 0.3
D1
10 to 15
D1
D0
Guide ring
Housing
1.
Metallic Bearing
Load
Air Bearings
Length
Slide Shifter
Regular press-fitting
Multi-layer Bearing
Plastic Bearing
Product
Information
Press-fitting jig
Figure 3
Housing chamfer
Press-fit force
Technical
Information
Corporate Profile
Unit : mm
139
Free gap
GO
NO GO
0
L 0.3
20
5
1.0mm
1.5mm
2.0mm
2.5mm
:
:
:
:
0.5mm
0.8mm
1.0mm
1.0mm
Plastic Bearing
Product
Information
3. The "GO" ring gauge stands for the upper limit and
the "NO GO" ring gauge the lower limit of the O.D.
tolerance.
Selection Guide
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
140
Selection Guide
70B
70 B - 1510
Parts No.
Product
Information
Motion
direction
Bushing
joint
Housing
thick bushingT
H7
h7
0.8
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
141
Mating shaft
6.3
chamfer
The joint causes no influences upon rotation of the shaft. Be careful when press-fitting so that the joint is not
at the position to which the maximum load is applied.
Shaft
Housing I.D.
O.D.
h7
H7
Size Tolerance Size Tolerance d D Tolerance
0
5
7 0.055
5 0.012
7 0.015
0.025
0
0.055
0
0.015
6
8
6 0.012
8 0
0.025
0
7
9 0.055
7 0.015
9 0.015
0.025
0
0
0.015
8 10 0.055
8 0.015 10 0
0.025
0
0.018
9 11 0.060
9 0.015 11 0
0.030
0.060
0
10
12
10 0.015
12 0.018
0.030
0
0
12 14 0.060
12 0.018
14 0.018
0.030
0
0
0.018
13 15 0.060
13 0.018 15 0
0.030
0.065
0
14
16
14 0.018
16 0.018
0.035
0
0
15 17 0.065
15 0.018
17 0.018
0.035
0
0
0.018
16 18 0.070
16 0.018 18 0
0.035
0
0.021
17 19 0.070
17 0.018 19 0
0.035
0
18 20 0.075
18 0.018
20 0.021
0.040
0
0
0.021
19 22 0.075
19 0.021 22 0
0.040
0
0.021
20 23 0.080
20 0.021 23 0
0.045
0.080
0
22
25
22 0.021
25 0.021
0.045
0
0
24 27 0.080
24 0.021
27 0.021
0.045
0
0
0.021
25 28 0.085
25 0.021 28 0
0.050
0
0.021
26 30 0.080
26 0.021 30 0
0.050
0
28 32 0.090
28 0.021
32 0.025
0.050
0
0
0.025
30 34 0.090
30 0.021 34 0
0.050
Wall thickness
T Tolerance
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
0.030
0.075
0.030
0.075
0.030
0.075
0.030
0.075
0504
0505
0605
0705
0506
0606
0806
7
0607
0707
8
0508
0608
0808
0.030
0.075
0.030
0.075
0.030
0.075
1006
1206
1007
1008
1208
10
0610
0710
0810
0910
1010
1210
0.030
0.075
0.030
0.075
0.035
0.085
0.035
0.085
1410
1510
1610
0.035
0.085
0.035
0.085
1810
0.035
0.085
0.035
0.085
0.035
0.085
2010
2210
0.035
0.085
0.035
0.085
0.035
0.090
0.035
0.090
0.035
0.090
2510
Selection Guide
D
d
Oil-impregnated
polyacetal
Back metal
12
35
2030
2230
2430
2530
2630
2830
3030
2535
40
0712
0812
1012
1212
1412
1512
1612
1812
2012
2212
2512
2812
3012
1420
1520
1620
1720
1820
2020
2220
2420
2520
2620
2820
3020
1525
1625
1825
2025
2225
2425
2525
2825
3025
2840
3040
Technical
Information
1020
1220
30
Slide Shifter
1015
1215
1315
1415
1515
1615
1715
1815
1915
2015
2215
2415
2515
2615
2815
3015
25
Air Bearings
20
Metallic Bearing
15
Multi-layer Bearing
Plastic Bearing
Product
Information
20
5
Corporate Profile
142
Selection Guide
70B
70B - 6050
Parts No.
Product
Information
Motion
direction
Bushing
Housing
thick bushingT
joint
H7
h7
0.8
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
143
Mating shaft
6.3
chamfer
The joint causes no influences upon rotation of the shaft. Be careful when press-fitting so that the joint is not
at the position to which the maximum load is applied.
Shaft
h7
Size Tolerance
0
31 0.025
0
32 0.025
0
35 0.025
0
38 0.025
0
40 0.025
0
42 0.025
0
45 0.025
0
50 0.025
0
55 0.030
0
60 0.030
0
65 0.030
0
70 0.030
0
75 0.030
0
80 0.030
0
85 0.035
0
90 0.035
0
100 0.035
0
110 0.035
0
120 0.035
0
130 0.040
0
140 0.040
0
150 0.040
0
160 0.040
Housing
H7
Size Tolerance
35 0.025
0
0.025
36 0
39 0.025
0
0.025
42 0
44 0.025
0
47 0.025
0
50 0.025
0
0.030
55 0
60 0.030
0
65 0.030
0
0.030
70 0
75 0.030
0
80 0.030
0
0.035
85 0
90 0.035
0
95 0.035
0
105 0.035
0
0.035
115 0
125 0.040
0
135 0.040
0
0.040
145 0
155 0.040
0
165 0.040
0
I.D.
O.D.
d D Tolerance T Tolerance
31
32
35
38
40
42
45
50
55
60
65
70
75
80
85
90
100
110
120
130
140
150
160
35
36
39
42
44
47
50
55
60
65
70
75
80
85
90
95
105
115
125
135
145
155
165
0.090
0.050
0.090
0.050
0.095
0.055
0.095
0.055
0.095
0.055
0.095
0.055
0.100
0.060
0.105
0.060
0.110
0.065
0.120
0.070
0.125
0.075
0.125
0.075
0.130
0.075
0.130
0.075
0.130
0.075
0.130
0.075
0.140
0.080
0.140
0.080
0.145
0.090
0.145
0.090
0.165
0.100
0.185
0.120
0.185
0.120
Wall thickness
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
12
15
0.035
0.090
0.035
0.090
0.035
0.090
0.035
0.090
0.035
0.090
0.040
0.105
0.040
0.105
0.040
0.105
0.040
0.105
0.040
0.105
0.045
0.095
0.045
0.095
0.045
0.095
0.045
0.095
0.045
0.095
0.045
0.095
0.060
0.110
0.060
0.110
0.060
0.110
0.060
0.110
0.060
0.110
0.060
0.110
0.060
0.110
3512
4012
3515
20
3220
3520
3820
4020
4520
5020
25
3125
3225
3525
4025
4525
30
3230
3530
3830
4030
4530
5030
5530
6030
6530
7530
40
3140
3240
3540
3840
4040
4240
4540
5040
5540
6040
6540
7040
7540
8040
8540
9040
50
3550
3850
4050
4250
4550
6050
10050
11050
12050
13050
14050
15050
16050
Selection Guide
D
d
Oil-impregnated
polyacetal
Back metal
Product
Information
20
5
L
Plastic Bearing
55
5065
70
5570
80
95
100
125
6080
7080
7580
8080
8580
10095
11095
12095
130125
140100 140125
150100 150125
160100 160125
Technical
Information
13080
14080
15080
16080
9090
Slide Shifter
10070
11070
12070
90
Air Bearings
4560
5060
5560
6060
6560
7060
7560
8060
8560
9060
65
Metallic Bearing
5055
60
Multi-layer Bearing
Corporate Profile
144
70W - 2815
knock pin hole H
D
d
Product
Information
Parts No.
P.C.D
Selection Guide
70W
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
145
Sliding
Parts No.
70W-0815
70W-1000
70W-1015
70W-1215
70W-1415
70W-1615
70W-1715
70W-1815
70W-2015
70W-2215
70W-2315
70W-2415
70W-2615
70W-2815
70W-3215
70W-3415
70W-3615
70W-3815
70W-3915
70W-4215
70W-4420
70W-4720
70W-4820
70W-5020
70W-5220
70W-5525
70W-6025
70W-6525
I.D.
O.D.
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
0.4
0.1
16
18
20
24
26
30
30
32
36
38
40
42
44
48
54
58
60
62
66
66
74
78
74
84
78
92
100
108
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
12
14
15
18
20
23
23.5
25
28
30
31.5
33
35
38
43
46
48
50
52.5
54
59
62.5
61
67
65
73.5
80
86.5
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Selection Guide
70P
70P - 1 564
Parts No.
Product
Information
W
surface consists of a plastic layer.
Parts No.
T Tolerance
1.0
1.0
1.5
1.5
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
Width
Length
120
120
120
120
470
720
470
720
Thickness
Parts No.
T Tolerance
70P-2064
70P-2067
70P-2564
70P-2567
2.0
2.0
2.5
2.5
0.015
0.115
0.015
0.115
0.015
0.115
0.015
0.115
Width
Length
120
120
120
120
470
720
470
720
Metallic Bearing
0.30.5mm
Thrust washer
0.30.5mm
Drymet ST
Air Bearings
Multi-layer Bearing
70P-1064
70P-1067
70P-1564
70P-1567
Thickness
Plastic Bearing
Sliding
Drymet ST
Sliding Surface
Knock pin
Sliding Surface
Housing
Dowel
0.30.5mm
Slide Shifter
Bushing
Housing
In the case of (2), the washer and plate may be inserted with glue, not a knock
Corporate Profile
Technical
Information
Using glue
146
Selection Guide
Product
Information
Oiles Drymet LF
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Sliding surface
Serviceable without the need for lubrication. Thin and lightweight for
compact design.
Demonstrate low coecient of friction and superior load performances in
high-load, low-speed conditions.
Usable at the high PV values even in the middle- and high-speed zones when
lubricated.
Usable in wide temperature ranges from low to high temperatures. Has
superior chemical resistance.
Features superior dimensional stability, mechanical strength, and thermal
conductivity.
The standard products and plate materials are available in various sizes.
Service range
Lubrication condition
Dry
200280
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
2
kgf/cm2
Allowable max. pressure P N/mm
147
49.0137
5001,400
0.6539
3.602,200
The values in parentheses are static bearing pressures, which are the bearing pressures
in applications with no motion or very small motion (0.0017m/s[0.1m/min]).
Allowable max. pressure of LFCF is 24.5N/mm 2250Kgf/cm 2.
Tensile strength
JIS Z 2241
Elongation
JIS Z 2241
27
Hardness
JIS Z 2244
Hv
107
The values shown above are typical values, not the standard values.
The values shown above are values of back metal.
3803,875
Back metal
image
Selection Guide
Test data
Testing conditions
Bearing dimension4044R30
Mating materialS45C
Pressure14.78.8N/mm2
150.090.0kgf/cm2
Velocity0.0880.167m/s
5.310.0m/min
0.20
0.15
Wear amount0.067mm
0.10
0.05
0
20
40
60
80
100
Test time
hrs.
0.25
2
2
Contact pressure 8.8N/mm90.0kgf/cm
Velocity 0.167m/s
10.0m/min
0.20
0.15
Wear amount0.043mm
0.10
20
40
60
Test time
hrs.
80
100
Metallic Bearing
0.05
Multi-layer Bearing
Coecient of friction
Lubricationdry
2
2
Contact pressure 14.7N/mm150.0kgf/cm
Velocity 0.088m/s
5.3m/min
Plastic Bearing
Test time100hrs.
0.25
Product
Information
Coecient of friction
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
148
Selection Guide
Oiles Drymet LF
D0
O.D.
D1
Metallic Bearing
Dimension of mandrel
Bushing
Figure 1
The dimension of guide ring should be calculated
from table below.
Dimension of bushing Guide ring I.D.
Up to 40
d1D1
0.20 to 0.30
42 to 60
RL
Guide ring
Housing
Over 65
D1
0.1 to 0.3
D1
0.2 to 0.5 D1
10 to 15
D1
0.5 to 1.0
D1
10 to 15
d1
1.
d0
Air Bearings
Mandrel
Slide Shifter
Load
d0D0
0.05 to 0.10
Figure 2
Technical
Information
Load
D1
D0
Corporate Profile
Length
149
Regular press-fitting
Multi-layer Bearing
Plastic Bearing
Product
Information
Press-fitting jig
Figure 3
Housing chamfer
For the housing chamfer, either a round chamfer or a tapered chamfer is recommended. In case of a C-surface
chamfer, (more than C1.0) make sure there is no burr. Smoother press-fitting is possible by applying small amount
of grease or lubricant.
Selection Guide
Press-fit force
Press-fit smoothly with hydralic (pressure), pneumatic pressure, or a vice.
Avoid press-fit by use of impact such as use of a hammer.
Product
Information
It might induce damage of the bushing, or change the size of the inner diameter after press-fit.
Press-fit force is obtained by below formula.
tLS
F
0.9 to 1.2
104kg
D1
Drymet LF
Unit : mm
Techmet B
Unit : mm
Toughmet / Toughmet D
Unit : mm
I.D.of bushing
I.D.of bushing
Up to 18
19 to 25
26 to 40
42 and over
LFCF
0.65
1.15
1.65
2.15
0.25
Up to 18
20 to 22
0.50
0.95
Up to 18
19 to 25
26 to 40
42 and over
0.70
1.10
1.60
2.10
tLS
F
0.4 to 0.8
104kg
D1
Techmet E
0.5
1.0
0.25
0.65
Metallic Bearing
Unit : mm
thickness of bearing
tLS
F
0.4 to 0.8
104kg
D1
Free gap
GO
NO GO
0
L 0.3
20
5
1.0mm
1.5mm
2.0mm
2.5mm
:
:
:
:
0.5mm
0.8mm
1.0mm
1.0mm
Technical
Information
Slide Shifter
3. The "GO" ring gauge stands for the upper limit and
the "NO GO" ring gauge the lower limit of the O.D.
tolerance.
Air Bearings
Multi-layer Bearing
I.D.of bushing
Plastic Bearing
Thickness
Corporate Profile
150
Selection Guide
LFB
LFB - 1508
Parts No.
Product
Information
Motion
direction
Housing
Bushing
joint
thick bushingT
H7
Shaft
0.8
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
151
Mating shaft
6.3
chamfer
The joint causes no influences upon rotation of the shaft. Be careful when press-fitting so that the joint is not
at the position to which the maximum load is applied.
Shaft
Housing I.D.
O.D.
H7
Size Tolerance Size Tolerance d D Tolerance
0.025
3
5 0.047
3 0.034
5 0.012
0.017
0
0.025
0.012
4
6 0.047
4 0.037
6 0
0.017
0.025
5
7 0.055
5 0.037
7 0.015
0.025
0
0.025
0.015
6
8 0.055
6 0.037
8 0
0.025
0.025
0.015
7
9 0.055
7 0.040
9 0
0.025
0.055
0.025
8
10
8 0.040
10 0.015
0.025
0
0.025
9 11 0.060
9 0.040
11 0.018
0.030
0
0.025
0.018
10 12 0.060
10 0.040 12 0
0.030
0.025
0.018
12 14 0.060
12 0.043 14 0
0.030
0.025
13 15 0.060
13 0.043
15 0.018
0.030
0
0.025
0.018
14 16 0.065
14 0.043 16 0
0.035
0.025
0.018
15 17 0.065
15 0.043 17 0
0.035
0.025
16 18 0.070
16 0.043
18 0.018
0.035
0
0.025
0.021
17 19 0.070
17 0.043 19 0
0.035
0.025
0.021
18 20 0.075
18 0.043 20 0
0.040
0.075
0.025
19
22
19 0.046
22 0.021
0.040
0
0.025
20 23 0.080
20 0.046
23 0.021
0.045
0
0.025
0.021
22 25 0.080
22 0.046 25 0
0.045
0.025
0.021
24 27 0.080
24 0.046 27 0
0.045
0.025
25 28 0.085
25 0.046
28 0.021
0.050
0
0.025
0.021
26 30 0.085
26 0.046 30 0
0.050
0.025
0.025
28 32 0.090
28 0.046 32 0
0.050
Wall thickness
T Tolerance
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.5
1.5
1.5
1.5
2.0
2.0
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0303
0403
0503
0603
0304
0404
0504
0604
0305
0405
0505
0605
0705
0805
0306
0406
0506
0606
0706
0806
0906
1006
1206
0607
0707
0807
0408
0508
0608
0708
0808
1007
1008
1208
1308
1408
1508
Selection Guide
D
d
Product
Information
20
5
Back metal
Plastic Bearing
0612
0712
0812
2510
2512
1012
1212
1312
1412
1512
1612
1812
2012
2212
16
20
25
1020
1220
1320
1420
1520
1620
1525
1625
30
35
0815
1414
1015
1215
1315
1415
1515
1615
1715
1815
1915
2015
2215
2415
2515
2615
2815
1416
1820
1920
2020
2220
2420
2520
2620
2820
1825
1830
2025
2225
2425
2525
2625
2825
2030
2230
2430
2530
2630
2830
2535
Technical
Information
2812
15
Slide Shifter
0610
0710
0810
0910
1010
1210
1310
1410
1510
1610
1710
1810
1910
2010
2210
14
Air Bearings
12
Metallic Bearing
10
Multi-layer Bearing
Corporate Profile
152
Selection Guide
LFB
LFB - 7035
Parts No.
Product
Information
Motion
direction
Bushing
joint
Housing
wall thicknessT
H7
Shaft
0.8
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
153
Mating shaft
6.3
chamfer
The joint causes no influences upon rotation of the shaft. Be careful when press-fitting so that the joint is not
at the position to which the maximum load is applied.
Shaft
Housing
H7
Size Tolerance H7 Tolerance
30 0.025
34 0.025
0
0.046
0.025
0.025
31 0.050 35 0
32 0.025
36 0.025
0
0.050
0.025
0.025
35 0.050 39 0
38 0.025
42 0.025
0
0.050
0.025
40 0.025
44
0
0.050
45 0.025
50 0.025
0
0.050
0.025
0.030
50 0.050 55 0
55 0.025
60 0.030
0
0.055
60 0.025
65 0.030
0
0.055
0.035
0.030
65 0.005 70 0
70 0.035
75 0.030
0
0.005
75 0.035
80 0.030
0
0.005
0.035
0.035
80 0.005 85 0
85 0.035
90 0.035
0
0
0.035
90 0.035
95
0
0
100 0.035
105 0.035
0
0
0.035
0.035
110 0
115 0
120 0.035
125 0.040
0
0
0.040
130 0.035
0
0.005 135
0.035
0.040
140 0.005 145 0
0.040
150 0.035
0
0.005 155
0.040
160 0.035
0
0.005 165
I.D.
O.D.
Wall thickness
d D Tolerance T Tolerance
12
15
20
25
30
35
0.090
0.050
3012
3020
4012
4015
3025
3125
3225
3525
3825
4025
4525
5025
5525
3030
3130
3230
3530
3830
4030
4530
5030
5530
6030
6530
7030
7530
3035
3512
3015
3115
3215
3515
30
31
32
35
38
40
45
50
55
60
65
70
75
80
85
90
100
110
120
130
140
150
160
34
35
36
39
42
44
50
55
60
65
70
75
80
85
90
95
105
115
125
135
145
155
165
0.090
0.050
0.090
0.050
0.095
0.055
0.095
0.055
0.095
0.055
0.100
0.060
0.105
0.060
0.110
0.065
0.120
0.070
0.125
0.075
0.125
0.075
0.130
0.075
0.130
0.075
0.130
0.075
0.130
0.075
0.140
0.080
0.140
0.080
0.145
0.090
0.145
0.090
0.165
0.100
0.185
0.120
0.185
0.120
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.040
0
0.040
0
0.040
0
0.040
0.030
0.080
0.030
0.080
0.030
0.080
0.030
0.080
0.030
0.080
0.030
0.080
0.030
0.080
0.030
0.080
0.030
0.080
0.030
0.080
0.030
0.080
0.030
0.080
0.030
0.080
3220
3520
3820
4020
4520
5020
3535
3835
4035
4535
5035
5535
6035
7035
7535
Selection Guide
D
d
a: O.D. chamfering
2.0
2.5
T
a
1.0
1.0 mm
Product
Information
20
5
b: I.D. chamfering
2.0
2.5
T
C0.5 C0.5 mm
b
Back metal
L
Plastic Bearing
3050
70
80
90
100
10095
11095
12095
100100
110100
120100
130100
140100
150100
160100
3550
4050
4550
5050
5550
6050
6550
7050
7550
8050
8550
9050
10050
11050
12050
13050
14050
15050
16050
5060
5560
6060
6560
7060
7560
8060
8560
9060
6080
7070
10070
11070
12070
7080
7580
8080
8580
10080
13080
14080
15080
16080
9090
Technical
Information
95
Slide Shifter
3040
3140
3240
3540
3840
4040
4540
5040
5540
6040
6540
7040
7540
8040
8540
9040
60
Air Bearings
50
Metallic Bearing
40
Multi-layer Bearing
Corporate Profile
154
Selection Guide
LFF
LFF - 2010
Parts No.
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
155
Mating shaft
Flange bushing
joint
H7
F
D
d
0.8
Shaft
Housing
T1
Product
Information
Motion
direction
T2
6.3
chamfer
The joint causes no influences upon rotation of the shaft. Be careful when press-fitting so that the joint is not
at the position to which the maximum load is applied.
Shaft
Housing
H7
Size Tolerance Size Tolerance
3 0.025
4.6 0.012
0
0.034
0.025
0.012
4 0.037 5.6 0
5 0.025
7 0.015
0
0.037
6 0.025
8 0.015
0
0.037
0.025
0.015
7 0.040 9
0
0.015
8 0.025
10
0
0.040
0.018
9 0.025
0
0.040 11
0.025
0.018
10 0.040 12
0
0.025
0.018
12 0.043 14
0
0.018
13 0.025
0
0.043 15
0.025
0.018
14 0.043 16
0
0.025
0.018
15 0.043 17
0
0.018
16 0.025
18
0
0.043
0.021
18 0.025
0
0.043 20
0.025
0.021
20 0.046 23
0
0.021
22 0.025
25
0
0.046
0.021
24 0.025
0
0.046 27
0.025
0.021
25 0.046 28
0
0.025
0.021
26 0.046 30
0
0.025
28 0.025
0
0.046 32
0.025
0.025
30 0.046 34
0
0.025
0.025
31 0.050 35
0
0.025
32 0.025
36
0
0.050
0.025
35 0.025
0
0.050 39
0.025
0.025
38 0.050 42
0
0.025
40 0.025
44
0
0.050
0.025
45 0.025
0
0.050 50
0.025
0.030
50 0.050 55
0
0.025
0.030
55 0.055 60
0
0.030
60 0.025
0
0.055 65
I.D.
O.D.
3
4
5
6
7
8
9
10
12
13
14
15
16
18
20
22
24
25
26
28
30
31
32
35
38
40
45
50
55
60
4.6
5.6
7
8
9
10
11
12
14
15
16
17
18
20
23
25
27
28
30
32
34
35
36
39
42
44
50
55
60
65
Flange
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
Wall thickness
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0
0.15
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
3
0303
4
0404
0504
5
0305
0505
0605
0705
6
0406
0506
0606
0806
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.025
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.040
0
0.040
0
0.040
0
0.040
1006
1206
Selection Guide
20
5
F
D
d
R3.5 or less
Back metal
R0.5 or less
0607
0707
0608
1007
1207
1008
1208
0610
0710
0810
0910
1010
1210
1310
1410
1510
1610
1810
2010
2210
0808
15
20
25
30
1525
1625
1825
2025
2225
2425
2525
2030
40
50
0712
0812
1012
1212
1412
1512
1612
1812
2012
2212
2512
2812
3012
4012
1220
1420
1520
1620
1820
2020
2220
2420
2520
2620
2820
3020
4025
4525
2830
3030
3040
3230
3530
3830
4030
4530
5030
5530
6030
3540
3840
4040
4540
5040
5540
6040
3550
4050
4550
Corporate Profile
3220
3520
3820
4020
4520
5020
3025
3125
3225
3525
2430
2530
Technical
Information
3512
1015
1215
1315
1415
1515
1615
1815
2015
2215
2415
2515
2615
2815
3015
Slide Shifter
2510
12
Air Bearings
10
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
T2
Product
Information
T1
156
LFW - 2015
knock pin hole H
D
d
Product
Information
Parts No.
P.C.D
Selection Guide
LFW
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
157
Sliding
Parts No.
LFW-0815
LFW-1015
LFW-1215
LFW-1415
LFW-1615
LFW-1815
LFW-2015
LFW-2215
LFW-2415
LFW-2615
LFW-2815
LFW-3215
LFW-3815
LFW-4215
LFW-4820
LFW-5220
I.D.
O.D.
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
16
18
24
26
30
32
36
38
42
44
48
54
62
66
74
78
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
0
0.25
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
2.0
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
0.03
0.08
1
1
1.5
2
2
2
3
3
3
3
4
4
4
4
4
4
0.30
0.10
0.30
0.10
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
0.375
0.125
12
14
18
20
23
25
28
30
33
35
38
43
50
54
61
65
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
Selection Guide
LFCF
LFCF - 0805
Parts No.
Housing
110
max 1
joint 2
Shaft
T2
6.3
R0.5max
chamfer
L
Tolerance of mating shaft
General use, high load e7
2 The joint causes no influences upon rotation of the shaft. Be careful when
press-fitting so that the joint is not at the position to which the maximum load
is applied.
3 There is no chamfer on LFCF.
I.D.
O.D.
Thick bushing
Flnage
D Tolerance F
Tolerance
T2
Tolerance
T1
0.055
0.025
8.5
0.5
0.48
0.05
0.48
0.02
5.5
0.092
0
LFCF-0605
0.055
0.025
10
0.5
0.48
0.05
0.48
0.02
5.5
0.095
0
LFCF-0705
0.055
0.025
11
0.5
0.48
0.05
0.48
0.02
5.5
0.095
0
LFCF-0805
0.055
0.025
12
0.5
0.48
0.05
0.48
0.02
5.5
0.095
0
LFCF-1006
10
11
0.060
0.030
15
0.5
0.48
0.05
0.48
0.02
6.5
0.098
0
LFCF-1206
12
13
0.060
0.030
17
0.5
0.48
0.05
0.48
0.02
6.5
0.098
0
LFCF-1606
16
17
0.060
0.030
21
0.5
0.48
0.05
0.48
0.02
6.5
0.098
0
Technical
Information
Slide Shifter
LFCF-0505
Air Bearings
Parts No.
Metallic Bearing
1 The degree shown is after press-fitted into the ring gauge of D +0.055mm.
(the ring gauge of D+0.060mm is used for the bushings of 11 or bigger.)
Multi-layer Bearing
H7
R1.0max
0.8
Mating shaft
T1
Motion
direction
Plastic Bearing
This bearing is as thin as 0.5 mm, allowing the user who gives up an
idea to use a bearing in a small space to use it.
The sliding layer made of plastic containing special additives
maintains stable coecient of friction. It is eective to reduce
abnormal noise and wear in applications without bushings.
Product
Information
Feature
Corporate Profile
158
Selection Guide
LFP
LFP - 1590
Metallic Bearing
Air Bearings
W
Sliding
Thickness
Parts No.
T Tolerance
LFP-1080
LFP-1590
LFP-20100
LFP-25100
Multi-layer Bearing
Plastic Bearing
Product
Information
Parts No.
1.0
1.5
2.0
2.5
0.03
0.13
0.03
0.13
0.03
0.13
0.03
0.13
Width
Length
80
90
100
100
500
500
500
500
Inlay method
Plate
0.30.5mm
Thrust washer
0.30.5mm
Drymet LF
Drymet LF
Sliding Surface
Slide Shifter
Knock pin
Bushing
Technical
Information
Sliding Surface
Housing
Dowel
0.30.5mm
Using glue
In the case of (2), the washer and plate may be inserted with glue, not a knock pin.
Corporate Profile
159
Housing
Selection Guide
Oiles LF Guides
Standard product
Product
Information
Plastic Bearing
Feature
Incorporates Oiles bearings for self-lubricating operations.
Features low coefficient of friction and superior wear resistance.
Easily mountable. Compatible with ball bearing types.
Low prices with simple structures.
Multi-layer Bearing
Parts No.
Dynamic
235 24
Static
m/sm/min
706 72
376 38 1,129
115
588 60 1,764
180
980
100 2,940
300
1,323
135 3,969
405
0.6740
30130
Air Bearings
LFG12-30
LFG16-37
LFG20-42
LFG25-59
LFG30-64
Metallic Bearing
Design condition
Slide Shifter
Unusable under the condition of water, splashing water and high humidity.
Technical
Information
Corporate Profile
160
Selection Guide
LFG
Oiles LF Guides
Specify Part No. by required I.D. and length.
(e.g.) I.D. is 20mm and length is 42mm.
LFG 20 - 42
Product
Information
Parts No.
h
d2
d1
F
K
6.3
Multi-layer Bearing
Metallic Bearing
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Parts No.
161
LFG12-30
LFG16-37
LFG20-42
LFG25-59
LFG30-64
I.D.
d
12
16
20
25
30
O.D.
0.017
0.032
0.017
0.032
0.024
0.038
0.024
0.038
0.029
0.042
30
37
42
59
64
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
Material
Aluminum with rust-proof finish
Drymet LF
NBR
Length
Mounting hole
42.8
49.0
55.3
64.9
75.4
32
37
42
50
58
6
6
8
8
10
D Tolerance L Tolerance
21
28
32
40
45
Part name
Housing
Bearing
Dust seal
6.3
Plastic Bearing
.D
P.C
Unusable under the condition of water, splashing water and high humidity.
P.C.D R
32
38
43
51
60
3
4
5
7
8
d1
d2
4.5 8
4.5 8
5.5 9.5
5.5 9.5
6.6 11
h
4.1
4.1
5.1
5.1
6.1
Bolt
M4
M4
M5
M5
M6
Product
Information
Sliding surface
Feature
Selection Guide
Oiles Techmet B
image
Lathe turning
carbide toolJIS
Lubrication condition
Dry
50250
2
kgf/cm2
Allowable max. pressure P N/mm
2.50150
1.45887
Condition
19.5137
1991,400
Elongation
JIS Z 2241
27
Hardness
JIS Z 2244
Hv
107
The values shown above are typical values, not the standard values.
The values shown above are values of back metal.
1020
Nose radius,mm
0.100.20
Speed m/min
60200
Cut depth mm
0.050.10
Feed mm/rev
0.050.20
O.D.
Length
class 7 (Note 1)
class 8 to 9
Corporate Profile
Technical
Information
Rake angle
Slide Shifter
2
2 380
N/mmkgf/cm
3,875
Tensile strength
510
Air Bearings
The values in parentheses are static bearing pressures, which are the bearing
pressures in applications with no motion or very small motion ( 0.0017m/s
[0.1m/min]).
Relief angle
Metallic Bearing
Cutting tool
Service range
Multi-layer Bearing
162
Velocity0.600m/s
36.0m/min
Stroke300mm
mm
Wear amount
Mating materialA5056
surface roughness 1mRz
2
2
Pressure0.98N/mm10.0kgf/cm
Velocity0.083m/s
5.0m/min
Atmospheric temperature300
Air Bearings
Lubricationdry
Slide Shifter
50
100
150
200
0.10
0.05
50
100
150
200
0.50
10
12
14
16
18
20
Test time
hrs.
Velocity1.667m/s
100.0m/min
Test time150hrs.
Technical
Information
0.10
Coecient of friction
Metallic Bearing
Testing conditions
Test time20hrs.
Corporate Profile
0.20
163
0.30
Lubricationdry
Multi-layer Bearing
Plastic Bearing
Reciprocating cycle60cpm
Lubricationdry
Coecient of friction
Product
Information
Testing conditions
Coecient of friction
Test data
Wear amount
mm
Selection Guide
Oiles Techmet B
0.30
0.25
0.20
0.15
0.10
0.05
0
30
60
90
120
150
120
150
Test time
hrs.
0.10
0.08
0.06
0.04
0.20
0
30
60
90
Test time
hrs.
Made-to-order
Selection Guide
TCB
TCB - 1208
Parts No.
Mating shaft
Bushing
joint
H7
Shaft
6.3
chamfer
The joint causes no influences upon rotation of the shaft. Be careful when press-fitting so that the joint is not
at the position to which the maximum load is applied.
Back metal
0.5
0.8 mm
C0.5 mm
Chamfering of inner or outer diameters less than 10 mm is done only to remove burrs.
I.D.
O.D.
D Tolerance
0.055
0.025
0504
0505
0605
0.055
0.025
0.060
0.030
0.060
0.030
0508
0606
0806
1006
1206
0808
1208
0.065
0.035
0.065
0.035
0.070
0.035
0.075
0.040
0.080
0.045
0.080
0.045
1607
10
0610
0810
1010
1210
1410
1510
1610
1810
2010
2210
12
15
20
0812
1415
1515
1615
1815
2015
1620
1820
2020
2220
Technical
Information
Slide Shifter
7
8
10
12
14
16
17
18
20
23
25
Air Bearings
5
6
8
10
12
14
15
16
18
20
22
0.055
0.025
Metallic Bearing
Multi-layer Bearing
D
d
20
5
Plastic Bearing
Housing
0.8
Product
Information
Motion
direction
Corporate Profile
164
Selection Guide
Product
Information
Oiles Techmet E
Sliding surface
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Back metal
image
Service range
Electrical resistivity
Lubrication condition
Dry
Load
20kgf
50250
2
kgf/cm2
Allowable max. pressure P N/mm
Pin
49137
5001,400
TechmetE
0.530
Ring
3.272,000
The values in parentheses are static bearing pressures, which are the bearing pressures
in applications with no motion or very small motion (0.0017m/s[0.1m/min]).
Indicator for
electrical
resistivity
Tensile strength
JIS Z 2241
N/mmkgf/cm
3803,875
Elongation
JIS Z 2241
27
Hardness
JIS Z 2244
Hv
107
The values shown above are typical values, not the standard values.
The values shown above are values of back metal.
Test data
Thrust rotation test
Testing conditions
Mating materialS45C-N
(surface roughness 1.6mRy)
2
2
Pressure9.8N/mm100kgf/cm
Corporate Profile
Velocity0.167m/s
10.0m/min
165
Test time20hrs
Lubricationdry
Coecient of friction
Technical
Information
0.30
0.25
0.20
0.15
0.10
0.05
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Test time
hrs.
Selection Guide
Oiles Toughmet
Product
Information
Feature
image
Lubrication condition
40350
Elongation
JIS Z 2241
27
24.549
250500
Hardness
JIS Z 2244
Hv
107
0.4024
1.651,010
Air Bearings
Dry
The values in parentheses are static bearing pressures, which are the bearing
pressures in applications with no motion or very small motion (0.0017m/s
[0.1m/min]).
Velocity0.014m/s
0.84m/min
Oscillating angle20
Oscillating cycle30cpm
0.40
0.30
2
2
19.6N/mm200.0kgf/cm
0.10
Test time50hrs.
Lubricationgrease is applled
2
2
9.8N/mm100.0kgf/cm
0.20
10
20
30
Test time
hrs.
40
50
Corporate Profile
at assembly.
Technical
Information
2
2
Pressure9.8N/mm100.0kgf/cm
2
2
19.6N/mm200.0kgf/cm
Coecient of friction
Testing conditions
Slide Shifter
Test data
Journal oscillation test
Metallic Bearing
Service range
Multi-layer Bearing
Back metal
Plastic Bearing
Sliding surface
166
Parts No.
Motion
direction
Mating shaft
Bushing
joint
Housing
thick bushingT
H7
h7
0.8
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
167
- 2520
Selection Guide
TMB
6.3
chamfer
The joint causes no influences upon rotation of the shaft. Be careful when press-fitting so that the joint is not
at the position to which the maximum load is applied.
Shaft
Housing I.D.
O.D.
Wall thickness
h7
H7
Size Tolerance Size Tolerance d D Tolerance T Tolerance
0
5 0.012
7 0.015
1.0 0.030
7 0.055
5
0.025
0
0.075
0
1.0 0.030
6 0.012
8 0.015
8 0.055
6
0.025
0
0.075
0.055
0
0.030
1.0
7 0.015
9 0.015
9 0.025
7
0
0.075
0
1.0 0.030
8 0.015
10 0.015
8 10 0.055
0.025
0
0.075
0.060
0
0.018
9 0.015 11 0
9 11 0.030 1.0 0.030
0.075
0
1.0 0.030
10 0.015
12 0.018
10 12 0.060
0.030
0
0.075
0.060
0
0.018
12 0.018 14 0
12 14 0.030 1.0 0.030
0.075
0
1.0 0.035
14 0.018
16 0.018
14 16 0.065
0.035
0
0.085
0.065
0
0.018
15 0.018 17 0
15 17 0.035 1.0 0.035
0.085
0
1.0 0.035
16 0.018
18 0.018
16 18 0.070
0.035
0
0.085
0.075
0
0.021
18 0.018 20 0
18 20 0.040 1.0 0.035
0.085
0
0.021
1.5 0.030
20 0.021 23 0
20 23 0.080
0.045
0.090
0.080
0
0.021
22 0.021 25 0
22 25 0.045 1.5 0.030
0.090
0
0.021
1.5 0.030
24 0.021 27 0
24 27 0.080
0.045
0.090
0.085
0
0.021
25 0.021 28 0
25 28 0.050 1.5 0.030
0.090
0
0.021
2.0 0.030
26 0.021 30 0
26 30 0.085
0.050
0.090
0.090
0
0.025
28 0.021 32 0
28 32 0.050 2.0 0.030
0.090
0
0.030
0.025
2.0
30 0.021 34 0
30 34 0.090
0.050
0.090
0
2.0 0.030
31 0.025
35 0.025
31 35 0.090
0.050
0
0.090
0.090
0
0.030
2.0
32 0.025
36 0.025
36
32
0.050
0
0.090
0
2.0 0.030
35 0.025
39 0.025
35 39 0.095
0.055
0
0.090
0.095
0
0.030
2.0
38 0.025
42 0.025
42
38
0.055
0
0.090
0
2.0 0.030
40 0.025
44 0.025
40 44 0.095
0.055
0
0.090
0.095
0
0.035
0.025
2.5
42 0.025 47 0
42 47 0.055
0.095
0
2.5 0.035
45 0.025
50 0.025
45 50 0.100
0.060
0
0.095
0.105
0
0.030
50 0.025 55 0
50 55 0.060 2.5 0.035
0.095
0
2.5 0.035
55 0.030
60 0.030
55 60 0.110
0.065
0
0.095
0.120
0
0.030
60 0.030 65 0
60 65 0.070 2.5 0.035
0.095
0
2.5 0.035
65 0.030
70 0.030
65 70 0.125
0.075
0
0.095
0.125
0
0.030
70 0.030 75 0
70 75 0.075 2.5 0.035
0.095
0
2.5 0.035
75 0.030
80 0.030
75 80 0.130
0.075
0
0.095
0.130
0
0.035
80 0.030 85 0
80 85 0.075 2.5 0.035
0.095
0
0.035
2.5 0.035
85 0.035 90 0
85 90 0.130
0.075
0.095
0.130
0
0.035
90 0.035 95 0
90 95 0.075 2.5 0.035
0.095
0
0.035
2.5 0.055
100 0.035 105 0
100 105 0.140
0.080
0.115
Outer diameter is measrued by exclusive gauge.
The I.D. tolerance after press fitting is for reference only.
5
0505
6
0606
8
0508
0808
1406
10
0610
0810
0910
1010
1210
1410
1510
2210
2510
12
15
0712
0812
0815
2012
1015
1215
1415
1515
1615
1815
2015
2515
3015
3515
Selection Guide
Back metal
Product
Information
D
d
20
5
20
2525
2820
3020
3025
3220
4025
3530
3830
4030
4530
5030
6030
6530
7030
3035
2840
3040
3140
3240
3540
4040
3550
3850
4050
4250
4550
5050
5060
6060
6560
10050
9060
70
80
5570
7080
7580
8080
8580
Corporate Profile
5040
5540
6040
6540
7040
7540
8040
8540
9040
60
Technical
Information
5025
5525
2535
50
Slide Shifter
3525
2030
2230
2430
2530
2630
2830
3030
40
Air Bearings
2520
35
Metallic Bearing
2020
2220
1525
1625
1825
2025
30
Multi-layer Bearing
1020
1220
1420
1520
1620
25
Plastic Bearing
168
Selection Guide
Product
Information
Oiles Toughmet D
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Features
Sliding surface
Dimples
Service range
Lubrication condition
Periodical lubrication
40150
2
kgf/cm2
Allowable max. pressure P N/mm
50100
5101,020
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
169
Oil lubrication
1.0060
5.00300
3.262,000
4.893,000
The values in parentheses are static bearing pressures, which are the bearing pressures
in applications with no motion or very small motion (0.0017m/s[0.1m/min]).
Tensile strength
JIS Z 2241
Elongation
JIS Z 2241
27
Hardness
JIS Z 2244
Hv
107
3803,875
Back metal
image
Selection Guide
CAC603LBC3
CAC406BC6
Toughmet D
10
20
Velocity : 0.8410-2m/s
0.5m/min
30
Product
Information
Coecient of friction
Test data
40
50
Testing timehrs
CAC406
LBC3
Plastic Bearing
CAC406
BC6
0.045
0.026
Toughmet D
0.05
0.1
0.15
0.2
50
Velocity :
0.5
CAC603LBC3
0.4
CAC406BC6
Toughmet D
0.3
0.2
0.1
0
1.6810-2m/s
1.0m/min
20
40
60
80
100
Testing timehrs
Oscillationcycles : 16cpm
Oscillation angle : 90
CAC406
LBC3
0.089
CAC406
BC6
Air Bearings
0.046
0.009
Toughmet D
Metallic Bearing
Coecient of friction
Wear amountmm
Multi-layer Bearing
0.02
0.04
0.06
0.08
0.1
Wear amountmm
Slide Shifter
Velocity : 0.84110-2m/s
0.5m/min
Oscillationcycles : 8cpm
Oscillation angle : 45
90
0.037
CAC603LBC3
Wear
0.196
CAC406BC6
Toughmet D
10
20
30
40
50
Testing time
hrs
W
Corporate Profile
Technical
Information
Coecient of friction
Testing conditions
170
Mating shaft
Bush
Free gap
H7
h7
Product
Information
0.8
Housing
Wall thicknessT
Direction of
motion
Selection Guide
TMDB
6.3
Chamfering
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Although free gap does not affect bearing rotation, please avoid maximum load point for free gap.
Corporate Profile
Technical
Information
171
Thickness
T Tolerance
1.0
1.0
1.0
1.0
1.0
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
0.015
0.040
0.015
0.040
0.015
0.040
0.015
0.040
0.015
0.045
0.024
0.054
0.024
0.054
0.024
0.054
0.024
0.054
0.024
0.054
0.024
0.054
0.024
0.054
0.037
0.072
0.037
0.072
0.037
0.072
0.037
0.072
0.037
0.072
0.037
0.072
0.037
0.072
0.037
0.072
0.053
0.098
0.053
0.098
0.053
0.098
0.053
0.098
0.053
0.098
10
15
20
1210
1410
1510
1215
1415
1515
1615
1815
2015
2215
2415
2515
1220
1420
1520
1620
1820
2020
2220
2420
2520
2620
2820
3020
3120
3220
3520
25
1525
1625
1825
2025
2225
2425
2525
30
2030
2230
2430
2530
2630
2830
3030
3130
3230
3530
3830
4030
4230
4530
5030
40
2640
2840
3040
3140
3240
3540
3840
4040
4240
4540
5040
5540
6040
6540
7040
7540
Selection Guide
Sintered layer
Back metal
50
60
70
80
I.D.Tolerance I.D.
after press fitting
Reference Value
0.098
0.030
0.098
0.030
0.098
0.030
0.111
0.030
0.129
0.048
0.129
0.048
0.129
0.048
0.129
0.048
0.133
0.048
0.133
0.048
0.169
0.074
0.169
0.074
0.169
0.074
0.169
0.074
0.169
0.074
0.169
0.074
0.169
0.074
0.174
0.074
0.226
0.106
0.226
0.106
6580
7080
7580
0.226
0.106
0.226
0.106
0.226
0.106
Slide Shifter
5060
5560
6060
6560
7060
7560
Air Bearings
3550
3850
4050
4250
4550
5050
5550
6050
Metallic Bearing
0.129
0.048
12
14
15
16
18
20
22
24
25
26
28
30
31
32
35
38
40
42
45
50
55
60
65
70
75
Multi-layer Bearing
0.098
0.030
Plastic Bearing
Product
Information
D
d
20
5
Technical
Information
Corporate Profile
172
Selection Guide
TMDP
TMDP - 20100
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
173
Product
Information
Parts No.
Parts No.
TMDP-1080
TMDP-1590
TMDP-20100
TMDP-25100
Thickness
T Tolerance
1.0
1.5
2.0
2.5
0.03
0.13
0.03
0.13
0.03
0.13
0.03
0.13
Width
Length
80
90
100
100
500
500
500
500
Inlay method
Plate
Selection Guide
Toughmet D
Sliding surface
Dowel
Product
Information
Housing
0.30.5mm
Plastic Bearing
Multi-layer Bearing
recommended. Please note that the plate may Separate if adhesive is used only.
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
174
Product
Information
Selection Guide
Hiplast
Hiplast E
Polytetrafluoroethylene plastic
composite with filler
Sliding Metallic
surface mesh
0.50
Multi-layer Bearing
Plastic Bearing
Feature
Air Bearings
Metallic Bearing
Expanded metal
Space
Service range
Lubrication condition
Dry
50250
2
kgf/cm2
Allowable max. pressure P N/mm
49.0500
0.3521
image
1.651,010
Corporate Profile
Technical
Information
Slide Shifter
175
Mesh
Tensile strength
JIS K 7113
Elongation
2
2
N/mmkgf/cm
The values shown above are typical values, not the standard values.
34.3350
30
Selection Guide
Test data
N/mm
Contact pressure kgf/cm
2
98
1,000
Lubricationdry
Product
Information
Mating materialS45C
9.8
100
0.167
10
0.833
50
m/s
Mating matreraialS45C
2
2
Pressure9.8N/mm100kgf/cm
is incre
mentally loaded every one hour.
Velocity0.083m/s
5.0m/min
Lubricationdry
0.10
0.05
9.8
100
19.6
200
29.4
300
N/mm2
39.2
400
49.0
500
Metallic Bearing
Coecient of friction
Testing conditions
0.15
Multi-layer Bearing
Thrust test
Plastic Bearing
0.98
100.021
1.25
Pressure kgf/cm
Air Bearings
5.88
60
19.6
200
3.92
40
2.94
30
1.96
20
8R7
0.05
0.10
Interference
mm
0.15
0
0.05
loose
0.05
0.10
Interferencemm
0.15
Technical
Information
8R7
9.8
100
0.98
10
0.05
loose
13R8
13R8
4.90
50
6.86
70
Slide Shifter
Nm
Rotational torque kgf
cm
Corporate Profile
176
Selection Guide
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Set a product on the mount housing, carry out preliminary forming once, and carry out final forming. It
has much superior assembly performance and economic efficiency than combination of the conventional
single-flange bushing and washer.
The Drymet LF (t 0.5) also allows flange machining. Contact the nearest sales office for details.
Product
Mount
housing
Inserting bushing
Rough forming
Flange forming
forming pin guide. The dimensions necessary for making the jigs are shown below for reference.
0. 03
B
0. 08
70
Corporate Profile
Technical
Information
177
0. 1
A
0. 2
Slide Shifter
A 0. 0 1
B 0 .0 1
A 0.05
0.03
A: Forming pin diameter (minimum mating hole diameter 1 mm)
B: Forming flange diameter (flange diameter after forming)
C: Upper limit of product flange diameter tolerance + 0.2 mm
Selection Guide
HPF
HPF - 0808
Parts No.
Mating shaft
Flange bushing
Housing
joint
H7
6.3
chamfer
The joint causes no influences upon rotation of the shaft. Be careful when press-fitting so that the joint is
not at the position to which the maximum load is applied.
Multi-layer Bearing
F
D
d
0.50.05
I.D.
Size Tolerance d D F
0.040
0.055
0.040
0.055
0.040
0.055
0.040
0.058
0.040
0.058
5
6
7
9
11
13
16
8
10
11
13
16
18
22
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.05
0.02
0.02
0.02
0.02
0.02
0.02
5
0405
0505
10
12
15
20
0.112
0.100
0606
0808
0510
0610
1010
0.055
0.040
0.055
0.040
1212
0815
1015
1515
0.055
0.040
0.058
0.040
1220
1520
0.058
0.040
0.058
0.040
The HPF0405, HPF0505, HPF0510, HPF1515 and HPF1520 have straight flange bottoms.
The I.D. tolerances after press fitting are the reference values measured in the condition where the bushings are inserted into the housings
and in close contact with them.
Slide Shifter
0.040
0.058
4
5
6
8
10
12
15
t Tolerance
I.D. tolerance
after press
fitting (reference)
Air Bearings
4
5
6
8
10
12
15
0.040
0.055
LengthTolerance 0.3
Metallic Bearing
Shaft
Plastic Bearing
0.5
Shaft
F
D
d
0.8
Product
Information
Motion
direction
Technical
Information
Corporate Profile
178
179
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Metallic Bearings
Oiles 500SP1
Oiles 500SP4
Oiles 500SP5
Oiles 500SPR
Oiles 500HP
Oiles 500AB
Oiles 500B
Oiles 500F
Oiles 500 Spherical Bearings
Oiles 2000
Oiles Shoe Units
Oiles 2000S
Oiles Cermet M
Oiles Cermet G
Oiles 300
Oiles 600
P.181
P.205
P.206
P.207
P.209
P.211
P.213
P.217
P.223
P.225
P.241
P.243
P.245
P.251
P.255
P.265
180
Selection Guide
Product
Information
Oiles 500SP1
Corporate Profile
Technical
Information
181
Service range
500SP1 SL1
Lubrication condition
Service temperature range
2
kgf/cm2
Allowable max. pressure P N/mm
500SP1 SL4
Dry
periodic lubrication
Dry
40300
40150
4080
29150
2961,530
49150
5001,530
0.5030
1.0060
0.2515
1.651,010
3.251,990
1.651,010
The values in parentheses are static bearing pressures, which are the bearing pressures in applications with no motion or very small
motion (0.0017m/s[0.1m/min]).
Lathe turning
g/cm3
Tensile strength
JIS Z 2241
2
2
N/mmkgf/mm
JIS Z 2241
Compressive strength
Impact strength
7.8
75577
12
carbide toolJIS
Cutting tool
Density
Relief angle
510
Rake angle
25
2
2 345
N/mmkgf/mm
35
Note 1
Nose radiusmm
0.400.80
JIS Z 2242
2
2
J/cmkgfm/cm
Speed m/min
100200
Hardness
JIS Z 2243
Cut depth mm
0.050.30
JIS Z 2241
Feed mm/rev
0.080.30
105 1
2.12
Thermal conductivity
W/mcal/seccm
87.80.21
191.9
HB210
2
2 105,000
N/mmkgf/mm
10,700
The values shown above are typical values, not the standard values.
Note 1Compressive strength is 0.1%
Condition
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
When you use standard 500SP1 seires in the temperature of 150 and over, contact
us for more information.
I.D.
O.D.
Length
Refer to page 36 for the suitable solid lubricant for made-to-order bearings.
Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for
custom-made products.
Solid lubricant, SL401 and SL403 are not lead-free.
class 7 to 8
class 6 to 7
class 8 to 9
Selection Guide
500SP1-SL1
Testing conditions
Mating materialS45C high frequency quenched
2
2
Pressure24.5N/mm250.0kgf/cm
Velocity0.033m/s
2.0m/min
Test time100hrs.
Ambiencein the atmosphere, room temp.
0.5
Wear amount of bearing0.020mm
0.4
Product
Information
Bearing dimension4050R30
Coecient of friction
Test data
0.3
0.2
0.1
0
10
20
30
40
50
60
70
80
90
100
500SP1-SL1
Testing conditions
Bearing dimension4050R30
2
2
Pressure19.6N/mm200.0kgf/cm
Velocity0.025m/s
1.5m/min
Oscillating cycle24cpm
Oscillating angle45
Test time168hrs.
0.4
0.3
0.2
0.1
0
28
56
84
112
140
168
Test time
hrs.
500SP1-SL4
Testing conditions
Bearing dimension405030
2
2
Pressure29.4N/mm300kgf/cm
Velocity0.012m/s
0.75m/min
Oscillating cycle12cpm
Oscillating angle45
0.3
0.25
0.2
0.15
Air Bearings
Mating materialSUS304
Coecient of friction
Lubricationdry
0.1
0.05
0
Test cycle70,000cycle
97.2h
10
20
30
40
50
60
70
Oscillation cycle
103cycles
Testing conditions
Bearing dimension607550
2
2
Pressure24.5N/mm250kgf/cm
Velocity 0.018m/s
1.13m/min
Oscillating cycle12cpm
Oscillating angle45
Test cycle70,000cycle
97.2h
Lubricationinitial grease SL464g coating
0.25
0.2
0.15
0.1
0.05
0
10
20
30
40
50
3
Oscillation cycle
10 cycles
60
70
Corporate Profile
0.3
Technical
Information
Mating materialSUS403
Coecient of friction
500SP1-SL4
Slide Shifter
Metallic Bearing
0.5
Multi-layer Bearing
Mating materialS45C
Coecient of friction
Test time
hrs.
Plastic Bearing
Lubricationdry
182
Selection Guide
SPB
SPB - 253320
Parts No.
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
Housing
H7
D
d
1.6
Shaft
d8: For general ( High-load)
e7: For general (Low-load)
f7: For high accuracy
6.3
chamfer
183
Bushing
Mating shaft
Shaft
Product
Information
Motion
direction
d Tolerance D Tolerance
6
8
10
12
13
14
15
16
17
18
19
20
20
22
25
25
28
30
30
31.5
32
35
35
38
40
40
45
45
45
0.022
0.010
0.028
0.013
0.028
0.013
0.034
0.016
0.034
0.016
0.034
0.016
0.034
0.016
0.034
0.016
0.034
0.016
0.034
0.016
0.041
0.020
0.041
0.020
0.041
0.020
0.041
0.020
0.041
0.020
0.041
0.020
0.041
0.020
0.041
0.020
0.041
0.020
0.050
0.025
0.050
0.025
0.050
0.025
0.050
0.025
0.050
0.025
0.050
0.025
0.050
0.025
0.050
0.025
0.050
0.025
0.050
0.025
Length LTolerance
O.D.
10
12
14
18
19
20
21
22
23
24
26
28
30
32
33
35
38
38
40
40
42
44
45
48
50
55
55
56
60
0.015
0.006
0.018
0.007
0.018
0.007
0.018
0.007
0.021
0.008
0.021
0.008
0.021
0.008
0.021
0.008
10
12
15
061008
081208
101408
121808
061010
081210
101410
121810
131910
142010
152110
162210
061012
081212
101412
121812
131912
142012
152112
162212
182410
182412
202810
203010
202812
203012
223212
253312
253512
081215
101415
121815
131915
142015
152115
162215
172315
182415
192615
202815
203015
223215
253315
253515
303812
304012
303815
304015
0.021
0.008
0.021
0.008
0.021
0.008
0.021
0.008
0.021
0.008
0.025
0.009
0.025
0.009
0.025
0.009
0.025
0.009
0.025
0.009
0.025
0.009
0.1
0.3
16
19
121816
121819
152116
162216
162219
182416
202816
203016
253316
253516
202819
20
25
101420
121820
131920
142020
152120
162220
121825
131925
142025
152125
162225
182420
192620
202820
203020
223220
253320
253520
283820
303820
304020
182425
202825
203025
223225
253325
253525
283825
303825
304025
0.025
0.009
0.025
0.009
0.025
0.009
0.025
0.009
324220
354420
354520
354425
354525
405020
405025
0.025
0.009
0.025
0.009
0.030
0.011
405015
405515
0.030
0.011
0.030
0.011
0.030
0.011
Selection Guide
Set screw
1.6
04.5
1.6
Use this product together with the Oiles #500SP washer (SPW shown
on page 193) in a position where thrust loads are applied.
10
R12
SPW
Do
SPB
Length LTolerance
35
40
50
0.1
0.3
60
70
80
152135
162235
152140
162240
0.030
0.012
0.030
0.012
0.030
0.012
182430
182435
182440
0.030
0.012
202830
203030
202835
203035
202840
203040
202850
203050
0.037
0.016
0.037
0.016
0.037
0.016
303835
304035
354435
354535
253350
253550
253360
253560
0.037
0.016
0.037
0.016
0.037
0.016
303850
304050
303860
304060
0.037
0.016
0.037
0.016
0.046
0.021
0.046
0.021
354450
354550
354460
354560
0.046
0.021
0.046
0.021
0.046
0.021
405050
405550
455550
455650
456050
405060
405560
455560
455660
456060
405070
405080
0.046
0.021
0.045
0.020
0.045
0.020
0.045
0.020
456070
456080
0.045
0.020
Corporate Profile
405035
405535
455535
455635
456035
253340
253540
283840
303840
304040
314040
324240
354440
354540
384840
405040
405540
455540
455640
456040
Technical
Information
405030
405530
455530
455630
456030
253335
253535
Slide Shifter
253330
253530
283830
303830
304030
314030
324230
354430
354530
6
8
10
12
13
14
15
16
17
18
19
20
20
22
25
25
28
30
30
31.5
32
35
35
38
40
40
45
45
45
Air Bearings
0.037
0.016
Metallic Bearing
121830
131930
142030
152130
162230
0603
0803
1003
1203
1303
1403
1503
1603
1803
1803
2005
2005
2505
2505
2505
3005
3005
3005
3505
3505
3505
3505
4007
4007
4007
4507
4507
4507
4507
I.D.
Multi-layer Bearing
30
Be sure to determine the position with a countersunk head screw and fix when the SPW with
shown in the table below is used, since the inner diameter is larger than the shaft diameter.
Plastic Bearing
Applicable
Set screw
Product
Information
Dm6
dF7
C0.30.5
184
Selection Guide
SPB
SPB - 809670
Parts No.
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
Housing
H7
D
d
1.6
Shaft
d8: For general (High-load)
e7: For general (Low-load)
f7: For high accuracy
6.3
chamfer
185
Bushing
Mating shaft
Shaft
Product
Information
Motion
direction
d Tolerance D Tolerance
50
50
50
55
60
60
63
65
70
70
75
75
80
80
85
90
100
110
120
125
130
140
150
160
170
180
190
200
0.050
0.025
0.050
0.025
0.050
0.025
0.060
0.030
0.060
0.030
0.060
0.030
0.060
0.030
0.060
0.030
0.060
0.030
0.060
0.030
0.060
0.030
0.060
0.030
0.060
0.030
0.060
0.030
0.071
0.036
0.071
0.036
0.071
0.036
0.071
0.036
0.071
0.036
0.083
0.043
0.083
0.043
0.083
0.043
0.083
0.043
0.083
0.043
0.083
0.043
0.083
0.043
0.096
0.050
0.096
0.050
Length LTolerance
O.D.
60
62
65
70
74
75
75
80
85
90
90
95
96
100
100
110
120
130
140
145
150
160
170
180
190
200
210
230
0.030
0.011
0.030
0.011
0.030
0.011
0.030
0.011
0.030
0.011
0.030
0.011
0.1
0.3
20
30
35
40
50
506020
506030
506230
506530
557030
607430
607530
506035
506235
557035
607435
607535
506040
506240
506540
557040
607440
607540
506050
506250
506550
557050
607450
607550
708530
708535
658040
708540
658050
708550
709050
759050
809640
8010040
809650
8010050
0.030
0.011
0.030
0.011
0.035
0.013
0.035
0.013
0.035
0.013
0.035
0.013
0.035
0.013
0.035
0.013
0.035
0.013
0.035
0.013
0.035
0.013
0.040
0.015
0.040
0.015
9011050
10012050
11013050
60
70
80
506070
506060
506080
506270
506260
506280
506570
506560
506580
557070
557060
607470
607460
607480
607570
607560
607580
637570
637560
637580
658070
658060
658080
708570
708560
708580
709070
709060
709080
759070
759060
759080
759570
759560
759580
809670
809660
809680
8010060 8010070 8010080
8510060
8510080
9011060
9011080
10012060 10012070 10012080
11013070 11013080
12014070 12014080
0.040
0.015
13015080
0.040
0.015
0.040
0.015
15017080
16018080
0.040
0.015
0.040
0.015
0.046
0.017
0.046
0.017
0.046
0.017
0.046
0.017
Selection Guide
25
15
Set screw
1.6
2.57.5
1.6
10
Use this product together with the Oiles #500SP washer (SPW shown
on page 193) in a position where thrust loads are applied.
R1.54
SPW
Set screw
SPB
Length LTolerance
100
120
130
0.1
0.3
140
150
200
5065100
7085100
90110120
100120120
110130120
120140120
125145120
100120140
120140140
130150130
0.076
0.036
0.076
0.036
0.076
0.036
0.076
0.036
0.076
0.036
0.088
0.042
0.088
0.042
Corporate Profile
150170150
160180150
170190150
180200150
190210150
200230150 200230200
0.076
0.036
Technical
Information
140160140
0.076
0.036
50
50
50
55
60
60
63
65
70
70
75
75
80
80
85
90
100
110
120
125
130
140
150
160
170
180
190
200
Slide Shifter
90110100
100120100
110130100
12014090 120140100
125145100
130150100
140160100
150170100
160180100
170190100
180200100
190210100
9011090
10012090
80100140
Air Bearings
7590100
7595100
8096100 8096120
80100100 80100120
I.D.
Metallic Bearing
6075100
Multi-layer Bearing
90
Be sure to determine the position with a countersunk head screw and fix when the SPW with
shown in the table below is used, since the inner diameter is larger than the shaft diameter.
Plastic Bearing
Product
Information
Dm6
dF7
C0.51.5
186
Selection Guide
SPBL
SPBL - 607580
Parts No.
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
187
Mating shaft
Bushing
12
15
16
18
20
25
30
35
40
40
45
50
50
55
60
65
70
75
80
90
100
110
120
130
140
150
160
170
180
190
200
0.050
0.032
0.050
0.032
0.050
0.032
0.050
0.032
0.061
0.040
0.061
0.040
0.061
0.040
0.075
0.050
0.075
0.050
0.075
0.050
0.075
0.050
0.075
0.050
0.075
0.050
0.090
0.060
0.090
0.060
0.090
0.060
0.090
0.060
0.090
0.060
0.090
0.060
0.107
0.072
0.107
0.072
0.107
0.072
0.107
0.072
0.125
0.085
0.125
0.085
0.125
0.085
0.125
0.085
0.125
0.085
0.125
0.085
0.146
0.100
0.146
0.100
18
21
22
24
30
35
40
45
50
55
60
60
65
70
75
80
90
95
100
110
120
130
140
150
160
170
180
190
200
210
230
0.034
0.023
0.041
0.028
0.041
0.028
0.041
0.028
0.041
0.028
0.050
0.034
0.050
0.034
0.050
0.034
0.050
0.034
20
121820
152120
162220
182420
203020
253520
304020
354520
25
30
chamfer
35
40
50
60
70
80
162230
253525
304025
203030
253530
304030
354530
405030
0.060
0.041
0.060
0.041
6.3
0.1
Length LTolerance
0.3
O.D.
d Tolerance D Tolerance
H7
D
d
Shaft
d8: For general
b9: For high-load, underwater,
and under seawater use
I.D.
Housing
1.6
Shaft
Product
Information
Motion
direction
456030
0.060
0.041
0.060
0.041
0.062
0.043
0.062
0.043
0.062
0.043
0.073
0.051
354535
203040
253540
304040
354540
405040
405540
506040
506540
557040
253550
304050
354550
405050
405550
456050
506050
506550
607550
354560
405060
405560
456060
506060
506560
557060
607560
658060
709060
0.073
0.051
0.073
0.051
0.076
0.054
0.076
0.054
8010060
9011060
10012060
506570
557070
607570
658070
709070
759570
607580
658080
709080
8010080
9011080
10012080
0.088
0.063
12014080
0.088
0.063
0.090
0.065
0.090
0.065
0.093
0.068
0.093
0.068
0.106
0.077
0.106
0.077
0.109
0.080
0.113
0.084
25
15
2.58.5
1.6
10
R1.54
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
Plastic Bearing
0.1
Length LTolerance
0.3
Product
Information
Dr6
dE7
C0.31
Selection Guide
GeneralUnderwaterUnder Seawater
188
Selection Guide
SPF
SPF - 5030
Parts No.
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
189
Mating shaft
Flange bushing
O.D.
6
8
10
12
13
14
15
16
18
20
25
30
31.5
35
40
45
50
55
60
63
65
70
75
80
90
100
120
130
140
150
160
0.032
0.020
0.040
0.025
0.040
0.025
0.050
0.032
0.050
0.032
0.050
0.032
0.050
0.032
0.050
0.032
0.050
0.032
0.061
0.040
0.061
0.040
0.061
0.040
0.075
0.050
0.075
0.050
0.075
0.050
0.075
0.050
0.075
0.050
0.090
0.060
0.090
0.060
0.090
0.060
0.090
0.060
0.090
0.060
0.090
0.060
0.090
0.060
0.107
0.072
0.107
0.072
0.107
0.072
0.125
0.085
0.125
0.085
0.125
0.085
0.125
0.085
10
12
14
18
19
20
21
22
24
30
35
40
40
45
50
55
60
65
75
75
80
85
90
100
110
120
140
150
160
170
180
0.028
0.019
0.034
0.023
0.034
0.023
0.034
0.023
0.041
0.028
0.041
0.028
0.041
0.028
0.041
0.028
0.041
0.028
0.041
0.028
0.050
0.034
0.050
0.034
0.050
0.034
0.050
0.034
0.050
0.034
0.060
0.041
0.060
0.041
0.060
0.041
0.062
0.043
0.062
0.043
0.062
0.043
0.073
0.051
0.073
0.051
0.073
0.051
0.076
0.054
0.076
0.054
0.088
0.063
0.090
0.065
0.090
0.065
0.093
0.068
0.093
0.068
16
20
22
25
26
27
28
29
32
40
45
50
50
60
65
70
75
80
90
85
95
105
110
120
130
150
170
180
190
200
210
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
2
2
2
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
7.5
7.5
7.5
7.5
7.5
10
10
10
10
10
10
10
10
6.3
chamfer
0.1
Length LTolerance
0.3
Flange
H7
F
D
d
Shaft
d8: For general (high-load)
t
e7: For general (low-load)
f7: For high accuracy
g6: For high accuracy (intermittent operation)
I.D.
Housing
1.6
Shaft
Product
Information
Motion
direction
Tolerance
10
12
0
0.1
0610
0810
1010
1210
1310
0612
0812
1012
1212
1312
1510
1512
1612
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
15
0815
1015
1215
1315
1415
1515
1615
1815
2015
2515
17
18
1017
1618
20
1020
1220
1320
1420
1520
1620
1820
2020
2520
3020
3120
3520
4020
23
25
1623
1225
1325
1425
1525
1625
1825
2025
2525
3025
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
3525
4025
R14
F
D r 6
dE7
10
1.6
14
10
15
R14
Product
Information
06
2.511
1.6
Selection Guide
C0.30.5
65 160
R0.5
R1 mm
Length
Tolerance
0.30.3
30
35
40
50
60
67.5
80
100
2550
3050
3550
4050
4550
5050
6050
7050
4560
5060
5560
6060
6560
6080
7080
Corporate Profile
8080
80100
9080
10080
100100
12080
120100
13080 130100
14080 140100
150100
160100
Technical
Information
7560
8060
9060
6367
Slide Shifter
1640
1840
2040
2540
3040
3140
3540
4040
4540
5040
5540
6040
Air Bearings
1635
1835
2035
2535
3035
3135
3535
4035
4535
5035
Metallic Bearing
1530
1630
1830
2030
2530
3030
3130
3530
4030
4530
5030
Multi-layer Bearing
1230
1330
Plastic Bearing
d
a
190
Selection Guide
SPFG
SPFG - 3525
Parts No.
Mating shaft
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Technical
Information
Corporate Profile
I.D.
O.D.
6
8
10
12
13
15
16
18
20
25
30
35
40
50
60
70
80
0.032
0.020
0.040
0.025
0.040
0.025
0.050
0.032
0.050
0.032
0.050
0.032
0.050
0.032
0.050
0.032
0.061
0.040
0.061
0.040
0.061
0.040
0.075
0.050
0.075
0.050
0.075
0.050
0.090
0.060
0.090
0.060
0.090
0.060
10
12
14
18
19
21
22
24
28
33
38
44
50
62
74
85
96
0.028
20
0.019
0.034
25
0.023
0.034
0.023
0.034
30
0.023
0.041
0.028
0.041
35
0.028
0.041
0.028
0.041
40
0.028
0.041
45
0.028
0.050
50
0.034
0.050
55
0.034
0.050
65
0.034
0.050
70
0.034
0.060
90
0.041
0.062
110
0.043
0.073
120
0.051
0.073
140
0.051
20
25
25
30
30
35
35
40
45
50
55
65
70
90
110
120
140
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
6.3
chamfer
Length L
Flange
Housing
H7
F
D
d
Shaft
t
d8: For general (high-load)
e7: For general (low-load)
f7: For high accuracy
g6: For high accuracy (intermittent operation)
191
Flange bushing
1.6
Shaft
Product
Information
Motion
direction
Tolerance
11
3
3
3
3
3
3
3
3
5
5
5
5
7
8
8
10
10
0
0.03
0611
0
0.03
0
0.03
0
0.03
0
0.03
0
0.03
0
0.03
0
0.03
0
0.03
0
0.03
0
0.03
0
0.03
0
0.03
0
0.04
0
0.04
0
0.04
0
0.04
13
18
0813
1013 1018
1211
1218
1313 1318
1513 1518
1613 1618
1818
20
2020
2520
3020
3520
23
1223
1323
1523
1623
1823
25
2025
2525
3025
3525
10
1.53.5
04
10
3.511
1.6
Product
Information
R12
1.6
F
Dr6
dE7
R12
a
15
1.6
Selection Guide
C0.3 0.5
14
10
R 0.1
0.3
Plastic Bearing
27
4037
38
5038
6038
47
4047
48
5048
6048
50
60
5058
6058
68
6068
8060
80
7080
Slide Shifter
7050
58
Air Bearings
3035
3535
37
Metallic Bearing
4027
35
0.1
0.3
Multi-layer Bearing
Length
L
L
Technical
Information
Corporate Profile
192
Selection Guide
SP
SPW - 3005
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
193
P.C.D
Product
Information
Parts No.
T
May be combined with the SPB.
See the description of the SPB for combination.
(Pages 183 to 186)
The products with the N marks at the end of
the part numbers have no mounting holes.
Parts No.
SPW-0603
SPW-0803
SPW-1003
SPW-1203
SPW-1203N
SPW-1303
SPW-1403
SPW-1503
SPW-1603
SPW-1603N
SPW-1803
SPW-2005
SPW-2505
SPW-2505N
SPW-3005
SPW-3005N
SPW-3505
I.D.
O.D.
Thickness
Tolerance
6.2
8.2
10.2
12.2
12.2
13.2
14.2
15.2
16.2
16.2
18.2
20.2
25.2
25.2
30.2
30.2
35.2
0.2
0.1
25
28
30
40
40
40
40
50
50
50
50
50
55
55
60
60
70
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
Mounting hole
0
0.1
0
0.1
0
0.1
0
0.1
15
18
20
28
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
35
35
40
M3
M3
M3
M3
2
2
2
M3
M5
M5
no hole
45
0
0.1
0
0.1
2
2
2
2
no hole
0
0.1
0
0.1
M3
M3
M3
M3
no hole
28
28
35
35
0
0.1
0
0.1
2
2
2
2
M5
no hole
50
M5
Selection Guide
Countersink type
No hole type
C1
Product
Information
1.6
D
d
Plastic Bearing
1.6
6.3
1.6
C1
P.C.D
D
d
Parts No.
O.D.
Thickness
40.2
45.2
50.3
55.3
60.3
65.3
70.3
75.3
80.3
90.5
100.5
120.5
0.2
0.1
80
90
100
110
120
125
130
140
150
170
190
200
7
7
8
8
8
8
10
10
10
10
10
10
0.2
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
Tolerance P.C.D
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
60
70
75
85
90
95
100
110
120
140
160
175
No. Countersink
of holes screw size
2
2
4
4
4
4
4
4
4
4
4
4
M6
M6
M6
M6
M8
M8
M8
M8
M8
M10
M10
M10
Slide Shifter
Tolerance
Air Bearings
Mounting hole
Metallic Bearing
SPW-4007
SPW-4507
SPW-5008
SPW-5508
SPW-6008
SPW-6508
SPW-7010
SPW-7510
SPW-8010
SPW-9010
SPW-10010
SPW-12010
I.D.
Multi-layer Bearing
Technical
Information
Corporate Profile
194
Selection Guide
SGF
SGF - 658080
Motion direction
F
Dm6
dH7
Multi-layer Bearing
C1
R2
1.6
1.6
t
L
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
6.3
chamfer
Parts No.
Corporate Profile
H7
F
D
d
t
C1
195
Housing
Flange bushing
1.6
Plastic Bearing
Product
Information
Parts No.
SGF-253540
SGF-304050
SGF-405570
SGF-506580
SGF-607580
SGF-658080
SGF-6580120
SGF-80100100
SGF-80100140
SGF-100120100
SGF-100120140
I.D.
O.D.
Flnage
d Tolerance D Tolerance F
25
30
40
50
60
65
65
80
80
100
100
0.021
0
0.021
0
0.025
0
0.025
0
0.030
0
0.030
0
0.030
0
0.030
0
0.030
0
0.035
0
0.035
0
35
40
55
65
75
80
80
100
100
120
120
0.025
0.009
0.025
0.009
0.030
0.011
0.030
0.011
0.030
0.011
0.030
0.011
0.030
0.011
0.035
0.013
0.035
0.013
0.035
0.013
0.035
0.013
45
50
65
75
85
90
90
110
110
130
130
t
7
10
10
10
10
10
10
10
10
10
10
Length
L Tolerance
40
50
70
80
80
80
120
100
140
100
140
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
R
10
20
20
20
20
20
20
20
20
20
20
Selection Guide
SGB
SGB - 608090
Parts No.
Housing
H7
D
d
Bushing
6.3
chamfer
Plastic Bearing
Product
Information
Motion direction
C1
C0.5
15
Multi-layer Bearing
Djs6
dH7
C1
C2
1.6
0.5
1.6
Parts No.
O.D.
Length
40
50
60
60
70
80
100
120
140
0.008
0.008
0.0095
0.0095
0.0095
0.0095
0.011
0.011
0.0125
40
50
55
60
75
90
120
150
180
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
10
10
15
10
15
20
25
25
25
5
5
5
5
10
10
10
10
10
Slide Shifter
25
30
35
40
50
60
80
100
120
Air Bearings
SGB-254040
SGB-305050
SGB-356055
SGB-406060
SGB-507075
SGB-608090
SGB-80100120
SGB-100120150
SGB-120140180
I.D.
Metallic Bearing
Technical
Information
Corporate Profile
196
4C1
W1
W2
Cross-section
G
4C1
17.5
SLP
6.3
SLP
Air Bearings
1.6
W2
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
SWP - 75200
Parts No.
Motion direction
Product
Information
Selection Guide
SP
11
SLP
R10 all
circumferences
Corporate Profile
Technical
Information
C3 all
circumferences
197
Type B
R5 all
3.5 circumferences
Type A
Slide Shifter
Chamfering
C3 all
circumferences
SWP
SWP
Selection Guide
Product
Information
Length
Thickness
Attach bolts
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
50
50
50
50
50
50
50
50
100
100
100
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
45
50
75
100
25
50
75
100
150
25
50
25
75
25 100
25 150
25 200
37.5 100
37.5 150
37.5 200
25 100
25 150
25 200
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
15
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
B
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Slide Shifter
0.1
0.3
0.1
0.3
Air Bearings
0.1
0.3
75
100
125
150
75
100
125
150
200
100
125
150
200
250
150
200
250
150
200
250
Metallic Bearing
48
48
48
48
75
75
75
75
75
100
100
100
100
100
125
125
125
150
150
150
Chamfering
Multi-layer Bearing
SWP-4875
SWP-48100
SWP-48125
SWP-48150
SWP-7575B
SWP-75100B
SWP-75125
SWP-75150
SWP-75200
SWP-100100
SWP-100125
SWP-100150
SWP-100200
SWP-100250
SWP-125150
SWP-125200
SWP-125250
SWP-150150
SWP-150200
SWP-150250
Width
Plastic Bearing
Parts No.
Technical
Information
Corporate Profile
198
Selection Guide
SFP
SFP - 28150
Parts No.
Product
Information
Motion direction
Plastic Bearing
W
Motion direction: length direction
SFP
SLP
SFP
SLP
W18283848
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
1.6
7
a
6.7
4C1
199
R2 all circumferences
11
Metallic Bearing
Multi-layer Bearing
SLP
Parts No.
SFP-1875
SFP-18100
SFP-18125
SFP-18150
SFP-2875
SFP-28100
SFP-28125
SFP-28150
SFP-3875
SFP-38100
SFP-38125
SFP-38150
SFP-4875
SFP-48100
SFP-48125
SFP-48150
C1 all circumferences
Cross-section
Width
W
18
18
18
18
28
28
28
28
38
38
38
38
48
48
48
48
T Toleramce a
75
100
125
150
75
100
125
150
75
100
125
150
75
100
125
150
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
0.04
0.01
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15
25
25
25
15
25
25
25
15
25
25
25
15
25
25
25
b
45
50
75
100
45
50
75
100
45
50
75
100
45
50
75
100
Type Qty
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Selection Guide
W3550
G
6
1.6
4C1
C1 all
circumferences
Product
Information
R2 all
circumferences
16
Cross-section
35
35
35
35
35
35
50
50
50
50
50
50
100
150
200
250
300
350
100
150
200
250
300
400
Attach bolts
T Toleramce a
10
10
10
10
10
10
10
10
10
10
10
10
60
55
55
70
65
80
60
55
55
70
65
90
55
50
70
65
75
55
50
70
65
90
55
70
65
75
55
70
65
90
65
80
65
90
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
20
20
20
20
20
20
20
20
20
20
20
20
Type Qty
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
2
3
4
4
5
5
2
3
4
4
5
5
Metallic Bearing
Hole intervals
Multi-layer Bearing
SFP-35100
SFP-35150
SFP-35200
SFP-35250
SFP-35300
SFP-35350
SFP-50100
SFP-50150
SFP-50200
SFP-50250
SFP-50300
SFP-50400
Length Thickness
Plastic Bearing
Width
Parts No.
Air Bearings
15
W75
T
6
45
b
15
1.6
C1 all
circumferences
4C1
Slide Shifter
R5 all
3.5 circumferences
16
Cross-section
Length Thickness
75
75
75
75
75
75
150
200
250
300
400
500
Hole intervals
T Toleramce a
10
10
10
10
10
10
0.025
0.025
0.025
0.025
0.025
0.025
20
20
20
20
20
20
Attach bolts
110
80 80
105 105
85 90 85
120 120 120
115 115 115 115
Type Qty
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
M8
Flat head
4
6
6
8
8
10
Corporate Profile
SFP-75150
SFP-75200
SFP-75250
SFP-75300
SFP-75400
SFP-75500
Width
Technical
Information
Parts No.
200
Selection Guide
SLP
SLP
SWP or SFP
SLP
SWP or SFP
SLP - 50300A
Motion direction
20
L
C1
C1
50
Width
Parts No.
SLP-50200A
SLP-50250A
SLP-50300A
SLP-50350A
SLP-50500A
20
Length Thickness
Cross-section
Hole intervals
Attach bolts
50
50
50
50
50
200
250
300
350
500
45
45
45
45
45
55
70
65
80
80
50
70
65
75
75
55
70
65
75
75
65
80
75
75
80
30
20
Parts No.
SLP-32100B
SLP-32150B
SLP-32200B
SLP-32250B
SLP-32400B
Width
15
20
Length Thickness
10
Cross-section
1.6
6.3
+0.10
+0.05
C1
R2
C1
4
4
5
5
7
1.6 R2
C1
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
11
C1 all
circumferences
C1
Type Qty
11
32
Hole intervals
22 0.05
6.3
20
14 28 0
0.05
6.3
22
C1
1.6
R2
6.3
W
Technical
Information
1.6
Corporate Profile
+0.10
C1
C1
R2
C1
C1
201
17.5
11
C1 all
circumferences
45
25 +0.05
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Parts No.
Attach bolts
Type Qty
32
32
32
32
32
100
150
200
250
400
30
30
30
30
30
60
55
55
70
75
55
50
70
70
55
70
70
70
75
M10
M10
M10
M10
M10
2
3
4
4
6
Selection Guide
14
9
C1 all
circumferences
20
C0.5
Length Thickness
20
20
20
20
60
55
55
75
55
50
70
1.6
70
55
70
75
6.3
14
9
6.3 R1
1.6
1.6
C0.5
R1
C0.5
6
a
Width
SLP-2050
SLP-20100
SLP-20150
SLP-20200
Length Thickness
20
20
20
20
Hole intervals
a
10
20
20
20
30
60
55
55
Type Qty
55
55
50
M8 Hexagon
socket head
M8 Hexagon
socket head
M8 Hexagon
socket head
M8 Hexagon
socket head
2
2
3
4
Slide Shifter
11
6.6
1.6
C0.5
6.3 R1
R1
Width
W
15
15
15
15
Length Thickness
L
50
100
150
200
15
Cross-section
T
15
15
15
15
Hole intervals
a
10
20
20
20
b
30
60
55
55
55
50
Attach bolts
55
Type Qty
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
2
2
3
4
Corporate Profile
SLP-1550
SLP-15100
SLP-15150
SLP-15200
10 0.05
6.3
Parts No.
Technical
Information
C0.5
5.5
8.5
C0.5
C0.5
1.6
15
+0.10
20
20
20
20
Attach bolts
7 +0.05
50
100
150
200
20
Cross-section
14 0.05
Air Bearings
Parts No.
2
3
4
6
20
C0.5
Type Qty
M8 Hexagon
socket head
M8 Hexagon
socket head
M8 Hexagon
socket head
M8 Hexagon
socket head
Metallic Bearing
C0.5
11.4
R2
Attach bolts
+0.10
100
150
200
400
Hole intervals
8 +0.05
26
26
26
26
26
Cross-section
20
Multi-layer Bearing
SLP-26100C
SLP-26150C
SLP-26200C
SLP-26400C
0
0.05
Plastic Bearing
Width
Parts No.
18
11.4
6.3
20
R2
+0.10
+0.05
10
C1
0 .5
6.3
Product
Information
1.6
C1
C1
C1
202
Parts No.
Motion direction
Example of attachment.
SLC
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
SLC-30100
SLC-30130
SLC-30160
SLC-30220
SLC-41100
SLC-41130
SLC-41160
SLC-41220
SLC-56100
SLC-56160
SLC-56220
Thicness Length
30
30
30
30
41
41
41
41
56
56
56
100
130
160
220
100
130
160
220
100
160
220
d1
W1
W2
1.6
6.3
1
C
Parts No.
20
1
C C1
20
6.3
1.6
203
C
1
6.3
d2
Clearance needed
t2
1
C
C
1
Multi-layer Bearing
Plastic Bearing
SLC - 41100
Product
Information
Selection Guide
SLC
t1
Width
Attach bolts
0.01
0.05
0.01
0.05
0.01
0.05
0.01
0.05
0.01
0.05
0.01
0.05
0.01
0.05
0.01
0.05
0.01
0.05
0.01
0.05
0.01
0.05
15
15
15
15
26
26
26
26
26
26
26
0.05
0.02
0.05
0.02
0.05
0.02
0.05
0.02
0.05
0.02
0.05
0.02
0.05
0.02
0.05
0.02
0.05
0.02
0.05
0.02
0.05
0.02
15
15
15
15
15
15
15
15
20
20
20
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
60
90
60
60
60
90
60
60
60
60
60
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10
10
10
7
7
7
7
7
7
7
7
9
9
9
11
11
11
11
11
11
11
11
14
14
14
23
23
23
23
34
34
34
34
47
47
47
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M6 Hexagon
socket head
M8 Hexagon
socket head
M8 Hexagon
socket head
M8 Hexagon
socket head
2
2
3
4
2
2
3
4
2
3
4
SLI - 20300
Parts No.
Product
Information
Motion direction
Plastic Bearing
1
C
W1
6.3
Metallic Bearing
SLI
Air Bearings
SLI-20300
SLI-25300
Clearance needed
Thicness Length
Width
20 300 15
25 300 23
0.01
0.05
0.01
0.05
11
10
0.05
0.02
0.05
0.02
10
15
0
0.05
0
0.05
5
8
Attachment
type
A
B
Slide Shifter
Parts No.
6.3
1
C
1.6
Attachment type B
Clearance needed
0.
SLI
1
C C1
W2
6.3
1.6
Multi-layer Bearing
Attachment type A
Selection Guide
SLI
Technical
Information
Corporate Profile
204
Feature
500SP4 is a self-lubricating bearing with embedded solid lubricant and metal
base that conforms to the universally-acknowledged ASTM Standards (C86300).
Serviceable without the need for lubrication.
Demonstrates high performance under high-load and low-speed operations.
Demonstrates superior wear resistance in applications where oil lm is seldom
produced such as reciprocating motions, oscillation, frequent starts and stops, etc.
Superior chemical resistance and corrosion resistance.
500SP 4 SL1
Lubrication condition
Dry
periodic lubrication
40300
40150
29150
2961,530
Lathe turning
carbide toolJIS
Cutting tool
Service range
Relief angle
510
Rake angle
25
0.50
30
1.0060
Nose radiusmm
0.400.80
1.651,010
3.251,990
Speed m/min
100200
Cut depth mm
0.050.30
Feed mm/rev
0.080.30
The values in parentheses are static bearing pressures, which are the bearing pressures
in applications with no motion or very small motion (0.0017m/s[0.1m/min]).
Above values are applicable when solid lubricants SL1 are used.
Use the solid lubricant SL464 (lead-free) in water or in environments where the bearings
are always exposed to water splashes. The operating temperature range is from -40C to
+80C (-40
F to 176
F).
g/cm3
Tensile strength
JIS Z 2241
2
2
N/mmkgf/mm
JIS Z 2241
Compressive strength
Impact strength
JIS Z 2242
2
2
J/cmkgfm/cm
Hardness
JIS Z 2243
JIS Z 2241
105 1
2.2
Thermal conductivity
W/mcal/seccm
87.80.21
7.8
Condition
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
205
Oiles 500SP4
75577
I.D.
O.D.
Length
12
class 7 to 8
class 6 to 7
class 8 to 9
2
2 345
N/mmkgf/mm
35
Note 1
191.9
HB223
2
2 105,000
N/mmkgf/mm
10,700
The values shown above are typical values, not the standard values.
Note 1Compressive strength is 0.1%
Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for custom-made products.
Solid lubricant, SL401 and SL403 are not lead-free.
Selection Guide
Oiles 500SP5
Product
Information
500SP 5 SL1
Lubrication condition
Dry
periodic lubrication
40150
2
kgf/cm2
Allowable max. pressure P N/mm
49170
5001,735
0.5030
1.651,010
3.251,990
The values in parentheses are static bearing pressures, which are the bearing
pressures in a pplica tions with no motion or ver y small motion ( 0.0017m/s
[0.1m/min]).
Above values are applicable when solid lubricants SL1 are used.
Tensile strength
JIS Z 2241
JIS Z 2241
Compressive strength
Hardness
JIS Z 2243
JIS Z 2241
g/cm3
2
2
N/mmkgf/mm
7.8
78580
10
2
2
N/mmkgf/mm
39040
Note 1
HB235
2
2
N/mmkgf/mm
98,00010,000
105 1
Slide Shifter
Density
Air Bearings
Metallic Bearing
0.25
15
Multi-layer Bearing
Service range
Plastic Bearing
Feature
2.13
Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for custom-made products.
Solid lubricant, SL401 and SL403 are not lead-free.
Technical
Information
The values shown above are typical values, not the standard values.
Note 1Compressive strength is 0.1%
Corporate Profile
206
Selection Guide
Product
Information
Oiles 500SPR
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Features
Applicable to higher pressure than 500HP.
Help realize a long-life operation or a compact design.
Service range
500SPR SL1
Lubrication condition
Dry
periodic lubrication
40150
2
kgf/cm2
Allowable max. pressure P N/mm
90200
9182,041
0.2515
0.5030
1.651,010
3.251,990
The values in parentheses are static bearing pressures, which are the bearing pressures
in applications with no motion or very small motion (0.0017m/s[0.1m/min]).
Above values are applicable when solid lubricants SL1 are used.
Tensile strength
JIS Z 2241
JIS Z 2241
Compressive strength
Hardness
JIS Z 2243
JIS Z 2241
g/cm3
2
2
N/mmkgf/mm
7.49
78079
1.0
2
2
Note 1
N/mmkgf/mm
46047
HB280
2
2
N/mmkgf/mm
105,00010,720
105 1
1.97
Corporate Profile
Technical
Information
The values shown above are typical values, not the standard values.
207
Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for custom-made products.
Solid lubricant, SL401 and SL403 are not lead-free.
Selection Guide
500SPR-SL1
Bearing dimension607542
Mating materialSCM440 quenched by high frequency
induction hardening
2
2
Pressure90N/mm918kgf/cm
Volocity0.008m/s
0.47m/min
Oscillation cycle5cpm
0.30
0.25
0.20
Co-efficient of friction
0.15
0.10
0.05
0.00
20
60
80
100
Test time
hrs.
100
80
Bearing temperature
60
40
20
0
20
40
60
80
100
Multi-layer Bearing
Bearing temperature
Test time100hrs.
Lubricataion : initially-greased only
40
Plastic Bearing
Oscillation angle45
Ambience : in the atmosphere, room temp.
Product
Information
Testing conditions
Coecient of friction
Test data
Test time
hrs.
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
208
Selection Guide
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Oiles 500HP
Features
Bears higher loads than the 500SP5.
Demonstrates superior wear resistance under high-load and low-speed
applications.
Service range
500HP SL1
Lubrication condition
Dry
periodic lubrication
40150
2
kgf/cm2
Allowable max. pressure P N/mm
73180
7451,837
0.106
0.2515
1.651,010
3.251,990
The values in parentheses are static bearing pressures, which are the bearing
pressures in a pplica tions with no motion or ver y small motion ( 0.0017m/s
[0.1m/min]).
Above values are applicable when solid lubricants SL1 are used.
Tensile strength
JIS Z 2241
JIS Z 2241
Compressive strength
Hardness
JIS Z 2243
JIS Z 2241
g/cm3
2
2
N/mmkgf/mm
7.6
54055
0.3
2
2
N/mmkgf/mm
49050
Note 1
HB245
2
2
N/mmkgf/mm
127,00013,000
105 1
1.8
The values shown above are typical values, not the standard values.
Corporate Profile
Technical
Information
209
Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for custom-made products.
Solid lubricant, SL401 and SL403 are not lead-free.
Selection Guide
HPB - 304040
Parts No.
Mating shaft
Housing
Bushing
H7
D
d
1.6
Shaft
d8: For general use (High-load)
e7: For general use (Low-load)
f7: For high accuracy use
chamfer
Plastic Bearing
24
C0.51
15
Multi-layer Bearing
Dr6
dE7
6.3
2.54.5
1.6
10
R1.52
1.6
O.D.
d Tolerance D Tolerance L
0.061
0.040
0.061
0.040
0.061
0.040
0.061
0.040
0.061
0.040
0.061
0.040
0.061
0.040
0.075
0.050
0.075
0.050
0.075
0.050
0.075
0.050
0.090
0.060
0.041
0.028
0.041
0.028
0.041
0.028
0.050
0.034
0.050
0.034
0.050
0.034
0.050
0.034
0.050
0.034
0.050
0.034
0.060
0.041
0.060
0.041
0.062
0.043
0.062
0.043
20
25
30
20
30
30
40
40
50
50
60
50
60
0.1
0.3
0.037
0.016
0.1
0.3
0.037
0.016
0.1
0.3
0.037
0.016
0.1
0.3
0.030
0.009
0.1
0.3
0.030
0.009
0.1
0.3
0.032
0.011
0.1
0.3
0.032
0.011
0.1
0.3
0.046
0.021
0.1
0.3
0.046
0.021
0.1
0.3
0.045
0.020
0.1
0.3
0.045
0.020
0.1
0.3
0.053
0.023
0.1
0.3
0.053
0.023
Technical
Information
0.090
0.060
30
30
30
35
35
40
40
50
50
60
60
75
75
Slide Shifter
20
20
20
25
25
30
30
40
40
50
50
60
60
I.D. tolerance
after press
Tolerance fitting (reference)
Length
Air Bearings
HPB-203020
HPB-203025
HPB-203030
HPB-253520
HPB-253530
HPB-304030
HPB-304040
HPB-405040
HPB-405050
HPB-506050
HPB-506060
HPB-607550
HPB-607560
I.D.
Metallic Bearing
Parts No.
Product
Information
Motion
direction
Shaft
HPB
Corporate Profile
210
Selection Guide
Product
Information
Oiles 500AB
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Features
Usable in seawater.
Has superior heat resistance.
Not brittle at low temperatures and may be used at very low temperatures.
Service range
500AB SL1
Lubrication condition
Service temperature range
Dry
periodic lubrication
250400
40150
2
kgf/cm2
Allowable max. pressure P N/mm
24100
2451,020
0.2515
0.5030
1.25765
2.451,500
The values in parentheses are static bearing pressures, which are the bearing pressures
in applications with no motion or very small motion (0.0017m/s[0.1m/min]).
Above values are applicable when solid lubricants SL1 are used.
When you use standard #500AB series in the temperature and over, contact us for more
information.
Density
Tensile strength
JIS Z 2241
JIS Z 2241
Compressive strength
Impact strength
JIS Z 2242
Hardness
JIS Z 2243
JIS Z 2241
105 1
1.6
Thermal conductivity
W/mcal/seccm
58.60.14
2
2
N/mmkgf/mm
7.6
59060
15
2
2
Note 1
N/mmkgf/mm
24024
2
2
J/cmkgfm/cm
252.5
HB160
2
2
N/mmkgf/mm
108,00011,000
The values shown above are typical values, not the standard values.
Corporate Profile
211
Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for custom-made products.
Solid lubricant, SL401 and SL403 are not lead-free.
Selection Guide
Oscillating cycle60cpm
Oscillating angle10
Test cycle
time
100,000cycle
27.8hrs.
0.05
0
20
Testing conditions
Bearing dimension80100R60
Mating materialS45C hard chrome plating
2
2
Pressure19.6N/mm200.0kgf/cm
2
2
29.4N/mm300.0kgf/cm
Oscillating cycle6cpm
Oscillating angle15
Test cycle
time
100,000cycle
278hrs.
Ambiencein the puried water
60
80
100
Oscillation cycle
102
0.20
2
2
Oiles 500AB-SL419.6N/mm200.0kgf/cm
Wear amount0.017mm
0.15
0.10
2
2
Oiles 500AB-SL429.4N/mm300.0kgf/cm
Wear amount0.022mm
0.05
0
20
40
60
80
3
Oscillation cycle
10
100
Metallic Bearing
Velocity0.004m/s
0.25m/min
40
Multi-layer Bearing
LubricationSL4L coating
0.10
Coecient of friction
0.15
Plastic Bearing
0.20
Product
Information
Testing conditions
Coecient of friction
Test data
W
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
212
Product
Information
Selection Guide
Oiles 500B
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
Serviceable without the need for lubrication.
Demonstrates high performance under middle-load and middle-speed
operations.
Usable at high temperatures.
Has superior chemical and corrosion resistances.
Standard products are available in various sizes.
Service range
500B 1 SL2
Lubrication condition
Service temperature range
Dry
periodic lubrication
40250
40150
2
kgf/cm2
Allowable max. pressure P N/mm
1549.0
153500
0.4024
0.8551
1.00612
1.651,010
The values in parentheses are static bearing pressures, which are the bearing pressures
in applications with no motion or very small motion (0.0017m/s[0.1m/min]).
Above values are applicable when solid lubricants SL2 are used.
Mechanical properties
g/cm3
500B 1
500B 2
8.8
8.7
19520
24525
15
15
Density
Tensile strength
JIS Z 2241
JIS Z 2241
Compressive strength
2
2
N/mmkgf/mm
959.5
Note1
13013
Note 1
Impact strength
JIS Z 2242
2
2
J/cmkgfm/cm
101
Hardness
JIS Z 2243
HB60
HB70
JIS Z 2241
83,0008,500
103,00010,500
105 1
1.8
2.0
Thermal conductivity
W/mcal/seccm
71.10.17
75.30.18
2
2
N/mmkgf/mm
2
2
N/mmkgf/mm
Corporate Profile
The values shown above are typical values, not the standard values.
213
Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for custom-made products.
Base metal contains lead.
Length
Relief angle
510
Rake angle
25
0.400.80
Speed m/min
100200
Cut depth mm
0.050.30
Feed mm/rev
0.080.30
Plastic Bearing
Condition
I.D.
Product
Information
Cutting tool
carbide toolJIS
Nose radiusmm
Selection Guide
Lathe turning
2
2
P
0.98N/mm10.0kgf/cm
10minutes
0.083m/s
5.0m/min
L
dry
Bearing temperature
0.30
150
100
0.20
Co-ecient of friction
50
0.10
0
2.0
3.9
5.9
7.8
9.8
11.8
13.7 15.7
20 40 60 80100120140
160
Air Bearings
N/mm
Metallic Bearing
S45C
0.40
erature
Testing conditions
Coecient of friction
Multi-layer Bearing
Slide Shifter
Technical
Information
Corporate Profile
214
Selection Guide
BCB
BCB - 607550
Parts No.
Mating shaft
Bushing
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
H7
D
d
L
215
I.D.
20
25
30
30
32
32
35
35
40
40
45
45
50
50
55
55
60
60
65
65
70
70
75
75
80
80
85
85
90
90
95
95
100
100
0.105
0.072
0.105
0.072
0.105
0.072
0.105
0.072
0.144
0.105
0.144
0.105
0.144
0.105
0.144
0.105
0.144
0.105
0.144
0.105
0.144
0.105
0.144
0.105
0.144
0.105
0.144
0.105
0.190
0.144
0.190
0.144
0.190
0.144
0.190
0.144
0.190
0.144
0.190
0.144
0.190
0.144
0.190
0.144
0.190
0.144
0.190
0.144
0.190
0.144
0.190
0.144
0.242
0.188
0.242
0.188
0.242
0.188
0.242
0.188
0.242
0.188
0.242
0.188
0.242
0.188
0.242
0.188
30
35
40
42
42
45
45
48
50
55
55
60
60
65
70
75
75
80
80
85
85
90
90
95
95
100
100
105
110
115
115
120
120
125
0.049
0.028
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.071
0.041
0.071
0.041
0.071
0.041
0.071
0.041
0.071
0.041
0.073
0.043
0.073
0.043
0.073
0.043
0.073
0.043
0.073
0.043
0.086
0.051
0.086
0.051
0.086
0.051
0.086
0.051
0.086
0.051
0.086
0.051
0.086
0.051
0.086
0.051
0.089
0.054
0.089
0.054
0.089
0.054
0.089
0.054
0.089
0.054
0.089
0.054
0.103
0.063
6.3
chamfer
O.D.
d Tolerance D Tolerance
Housing
1.6
h7
Product
Information
Motion
direction
20
25
30
203020
253520
203025
203030
253530
304030
304230
324230
324530
354530
354830
405030
405530
304025
304225
40
253540
304040
304240
324240
324540
354540
354840
405040
405540
455540
456040
506040
506540
50
354550
354850
405050
405550
455550
456050
506050
506550
557050
557550
607550
608050
60
506060
506560
557060
557560
607560
608060
658060
658560
708560
709060
759060
759560
809560
8010060
1.6
6.3
Product
Information
Dr7
d
0.31.2
28
Selection Guide
25
15
Slide Shifter
Technical
Information
Corporate Profile
8095100
80100100
85100100
85105100
90110100
90115100
95115100
95120100
100120100
100125100
Air Bearings
607580
608080
658080
658580
708580
709080
759080
759580
809580
8010080
8510080
8510580
9011080
9011580
9511580
9512080
10012080
10012580
Metallic Bearing
100
Multi-layer Bearing
80
Plastic Bearing
Do not remove lubricant applied to the inner surface of the product. Otherwise, the product will not demonstrate its performance.
216
Product
Information
Selection Guide
Oiles 500F
Technical
Information
Slide Shifter
Lathe turning
500F SL1
Lubrication condition
Service temperature range
Dry
periodic lubrication
40400
40150
2
51750 873.5
82750
kgf/cm2 573.5
Allowable max. pressure P N/mm
Tensile strength
JIS Z 2241
Compressive strength
510
Rake angle
25
0.2515
Nose radiusmm
0.400.80
0.50306
0.80490
Speed m/min
100200
Cut depth mm
0.050.30
Feed mm/rev
0.080.30
Relief angle
0.159
The values in parentheses are static bearing pressures, which are the bearing
pressures in a pplica tions with no motion or ver y small motion ( 0.0017m/s
[0.1m/min]).
Density
carbide toolJIS
Cutting tool
Service range
g/cm3
500F1 500F2
Condition
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
7.3
7.1
2
2
N/mmkgf/mm
25026
15015
2
2
N/mmkgf/mm
74075
44045
Impact strength
JIS Z 2242
2
2
J/cmkgfm/cm
40.4
10.1
Hardness
JIS Z 2243
HB190
HB160
2
2
107,80011,000 78,0008,000
Modulus of longitudinal elasticity JIS Z 2241 N/mmkgf/mm
Thermal conductivity
105 1
1.2
1.2
Corporate Profile
The values shown above are typical values, not the standard values.
217
When you use standard 500F series in the temperature of 150 and over, contact us for more information.
Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for custom-made products.
Solid lubricant, SL401 and SL403 are not lead-free.
O.D.
Length
Selection Guide
Test data
Testing conditions
B
4040t20
M
FC250
ound
2
2
P
5.9N/mm60.0kgf/cm
0.12m/s
7.0m/min
Test cycle100,000cycle
L
applied
0.03
0.02
2
2
P5.9N/mm60.0kgf/cm
0.01
0
20
40
60
80
2
Reciprocation cycle
10
100
Plastic Bearing
80mm
0.04
Product
Information
mm
test
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
218
Selection Guide
FGB
FGB - 608090
Parts No.
Bushing
H7
L
Plastic Bearing
Housing
D
d
Product
Information
Motion direction
6.3
chamfer
C1
R20
C0.5
Djs6
dH7
Multi-layer Bearing
C1
0.5
1
L
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
1.6
1.6
Parts No.
219
C2
15
FGB-254040
FGB-305050
FGB-356055
FGB-406055
FGB-406060
FGB-507075
FGB-608090
FGB-80100120
FGB-100120150
FGB-120140180
I.D.
O.D.
Length
0.021
0
0.021
0
0.025
0
0.025
0
0.025
0
0.025
0
0.030
0
0.030
0
0.035
0
0.035
0
40
50
60
60
60
70
80
100
120
140
0.008
0.008
0.0095
0.0095
0.0095
0.0095
0.0095
0.011
0.011
0.0125
40
50
55
55
60
75
90
120
150
180
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
0
0.2
10
10
15
15
10
15
20
25
25
25
5
5
5
5
5
10
10
10
10
10
Selection Guide
FWPT - 100100
Parts No.
Product
Information
Motion direction
L
Plastic Bearing
Chamfering
Cross-section
4C1
6.3
17.5
11
Length
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
20
20
20
20
20
20
20
20
20
20
20
20
20
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
50
75
100
150
200
75
100
150
200
100
150
200
250
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
25
25
25
25
25
25
25
25
25
25
25
25
25
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
2
2
2
2
2
2
2
2
2
2
2
2
2
A
A
A
A
A
A
A
A
A
A
A
A
A
Technical
Information
0.1
0.3
100
125
150
200
250
125
150
200
250
150
200
250
300
Slide Shifter
100
100
100
100
100
125
125
125
125
150
150
150
150
Chamfering
Air Bearings
FWPT-100100
FWPT-100125
FWPT-100150
FWPT-100200
FWPT-100250
FWPT-125125
FWPT-125150
FWPT-125200
FWPT-125250
FWPT-150150
FWPT-150200
FWPT-150250
FWPT-150300
Width
Metallic Bearing
Parts No.
C3 all circumferences
1.6
Multi-layer Bearing
Type A
Corporate Profile
220
Selection Guide
FWP
FWP - 58100
Product
Information
Parts No.
Motion direction
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
221
4C1
4C1
2
Parts No.
FWP-2875
FWP-28100
FWP-28125
FWP-28150
FWP-28200
FWP-3875
FWP-38100
FWP-38125
FWP-38150
FWP-38200
FWP-4875
FWP-48100
FWP-48125
FWP-48150
FWP-48200
FWP-48200A
FWP-48250
FWP-5875
FWP-58100
FWP-58125
FWP-58150
Width
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
4C1
L
Length
W2
W1
W2
Multi-layer Bearing
Plastic Bearing
75
100
125
150
200
75
100
125
150
200
75
100
125
150
200
200
250
75
100
125
150
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
45
50
75
100
150
45
50
75
100
150
45
50
75
100
100
150
100
45
50
75
100
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
15
25
25
25
25
15
25
25
25
25
15
25
25
25
50
25
25
15
25
25
25
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
2
2
2
2
Chamfering
C
C
C
C
C
C
C
C
C
C
B
B
B
B
B
B
B
B
B
B
B
Selection Guide
Product
Information
Chamfering
Type A
11
Length
Thickness
C1 all
circumferences
Attach bolts
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
50
50
50
50
50
75
50
50
50
50
100
100
100
150
150
150
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
25
25
25
25
25
25
37.5
37.5
37.5
37.5
25
25
25
25
25
25
25
50
75
100
150
50
75
100
150
200
75
75
100
150
200
100
150
200
150
200
250
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Corporate Profile
0.1
0.3
0.1
0.3
Technical
Information
0.1
0.3
75
100
125
150
200
100
125
150
200
250
125
125
150
200
250
150
200
250
200
250
300
Slide Shifter
75
75
75
75
75
100
100
100
100
100
125
125
125
125
125
150
150
150
200
200
200
Chamfering
Air Bearings
FWP-7575B
FWP-75100B
FWP-75125
FWP-75150
FWP-75200
FWP-100100
FWP-100125
FWP-100150
FWP-100200
FWP-100250
FWP-125125
FWP-125125A
FWP-125150
FWP-125200
FWP-125250
FWP-150150
FWP-150200
FWP-150250
FWP-200200
FWP-200250
FWP-200300
Width
C3 all
circumferences
Metallic Bearing
Parts No.
R5 all
3.5 circumferences
C3 all
circumferences
6.3
Type C
R5 all
3.5 circumferences
Multi-layer Bearing
1.6
Type B
R10 all
6 circumferences
17.5
Plastic Bearing
Cross-section
222
Selection Guide
Unit bearings
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
223
Feature
Conforms to the ISO Standard E type bearings. Compatible with them dimensionally. High precision.
The inner surface of the inner race is subject to sliding. The outer surface of the inner race bears self-aligning.
Applicable to higher loads than other self-lubricating spherical bearings.
Applicable to large oscillating angles in circumferential oscillating motion.
Serviceable without the need for lubrication. Features quite long service life.
Service range
Lubrication condition
Service temperature range
40150
2
kgf/cm2
Allowable max. pressure P N/mm
39.2400
0.159
0.80490
Parts No.
SPS-2035E
SPS-2542E
SPS-3047E
SPS-3555E
SPS-4062E
SPS-4568E
SPS-5075E
SPS-6090E
SPS-70105E
SPS-80120E
SPS-90130E
SPS-100150E
SPS-110160E
SPS-120180E
23,500 2,400
15,600 1,600
39,200 4,000
21,100 2,160
52,900 5,400
27,400 2,800
68,600 7,000
9,410
34,500 3,520
86,200 8,800
44,100 4,500
109,00011,200
54,900 5,600
137,00014,000
84,700 8,640
211,00021,600
109,00011,200
274,00028,000
141,00014,400
353,00036,000
176,00018,000
441,00045,000
215,00022,000
539,00055,000
237,00024,200
593,00060,500
329,00033,600
823,00084,000
Note 1The allowable dynamic loads are calculated based on the allowable bearing pressure in
oscillating motion, which is 39.2 N/mm2 [400 kgf/cm2]. They apply to the long-term loads
under normal conditions.
Note 2The allowable static loads are calculated based on the allowable static bearing pressure
98.0 N/mm 2 [1,000 kgf/cm 2 ] (i.e., allowable bearing pressure when accompanied with
no sliding or accompanied with sliding at quite low speed not more than 0.0017 m/s [0.1
m/min.]. They apply to the accidental short-term loads under abnormal conditions.
maximum load
divided face
press-fit
mandrel
chamfer
housing
Example of
attachment
Selection Guide
SPS
SPS - 5075 E
Parts No.
Product
Information
1.6
10
MoS2 coating
hardened SUJ2 outer race
O.D.
d Tolerance D Tolerance
0.021
0
0.021
0
0.021
0
0.025
0
0.025
0
0.025
0
0.025
0
0.030
0
0.030
0
0.030
0
0.035
0
0.035
0
0.035
0
0
0.011
0
0.011
0
0.011
0
0.013
0
0.013
0
0.013
0
0.013
0
0.015
0
0.015
0
0.015
0
0.018
0
0.018
0
0.018
0
0.018
C Tolerance S
24
29
34
40
45
51
56
67
78
89
98
110
121
136
16
20
22
25
28
32
35
44
49
55
60
70
70
85
12
16
18
20
22
25
28
36
40
45
50
55
55
70
0
0.24
0
0.24
0
0.24
0
0.3
0
0.3
0
0.3
0
0.3
0
0.4
0
0.4
0
0.4
0
0.5
0
0.5
0
0.5
0
0.5
29
35.5
40.7
47
53
60
66
80
92
105
115
130
140
160
h
3.5
5.0
5.0
6.0
6.0
6.0
6.0
6.0
7.0
7.0
7.0
7.0
8.0
8.0
9
7
6
6
7
7
6
6
6
6
5
7
6
6
Technical
Information
0.035
0
35
42
47
55
62
68
75
90
105
120
130
150
160
180
d1
Slide Shifter
20
25
30
35
40
45
50
60
70
80
90
100
110
120
2.59.5
Air Bearings
SPS-2035E
SPS-2542E
SPS-3047E
SPS-3555E
SPS-4062E
SPS-4568E
SPS-5075E
SPS-6090E
SPS-70105E
SPS-80120E
SPS-90130E
SPS-100150E
SPS-110160E
SPS-120180E
I.D.
inner race
Oiles 500SPI
Metallic Bearing
Parts No.
divided face
10
1.6
2.59.5
dH7
(R0.31.0)
Multi-layer Bearing
d1
R0.31.0
Mating shaft
For general: e7 (Recommended housing K7)
For high load: d8 (Recommended housing N7)
Plastic Bearing
circumferential oscillating
motion
C
h
D toherance is nominal.
Corporate Profile
224
Standard product
Custom-made product
Product
Information
Selection Guide
Oiles 2000
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
225
Dispersed solid lubricant allows motions in any direction and oers superior
performance for minute movements.
Serviceable without the need for lubrication.
Features superior load resistance, speed characteristics, and wear resistance.
Standard products and plates for additional machining are available in various
sizes.
Lathe turning
Service range
Dry
40120
2
250750 4973.5
500750
kgf/cm2 24.573.5
Allowable max. pressure P N/mm
carbide toolJIS
periodic lubrication
Cutting tool
Lubrication condition
Relief angle
510
Rake angle
25
0.5030
1.0060
Nose radiusmm
0.400.80
1.631,000
2.451,500
Speed m/min
150300
Cut depth mm
0.100.20
Feed mm/rev
0.050.15
The values in parentheses are static bearing pressures, which are the bearing pressures in
applications with no motion or very small motion (0.0017m/s[0.1m/min]).
Mechanical
proper ties
Density
g/cm33
6.3
Hardness
JIS Z 2245
HRM6095
Oil impregnation
rate
vol%
12
Condition
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
O.D.
Length
Selection Guide
Velocity0.12m/s
7.0m/min
Reciprocation cycle44cpm
0.03
0.02
0.01
0
2
2
P11.8N/mm120.0kgf/cm
2
2
P5.9N/mm60.0kgf/cm
Test cycle100,000cycle
20
40
60
80
100
Reciprocation cycle
102
Testing conditions
Bearing dimension6395t15
Mating materialFC250 ground
S45C quenched and ground
2
2
Pressure19.6N/mm200.0kgf/cm
Velocity0.16m/s
9.6m/min
0.04
Mating materialS45C quenched and ground
Mating materialFC250 ground
0.03
0.02
0.01
Stroke80mm
100
200
300
400
500
Impact cycle
103
Test cycle500,000cycle
Velocity0.002m/s
0.105m/min
Oscillating cycle10cpm
Test cycle
time
100,000cycle
166.7hrs.
Lubricationinitial greasing at installation
10
20
30
40
50
60
70
80
90
100
80
90
100
0.40
0.35
0.30
Technical
Information
Coecient of friction
Oscillation cycle
10
S35C gas nitriding
SUS403
S35C hard-chrome plating
Slide Shifter
Oscillaing angle5
100
90
80
70
60
50
40
30
20
10
0
Air Bearings
Testing conditions
Bearing temperature
Metallic Bearing
Impact frequency60cpm
Multi-layer Bearing
Wear amountmm
Lubricationinitial greasing at
installation
Plastic Bearing
Stroke80mm
0.04
Product
Information
Testing conditions
Wear amountmm
Test data
0.25
0.20
0.15
0.10
0.05
0
10
20
30
40
50
60
70
3
Oscillation cycle
10
Corporate Profile
226
Parts No.
is 50mm.
Mating shaft
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Shaft
227
12
13
14
15
16
18
20
20
25
25
28
30
30
35
35
40
45
45
50
50
50
55
60
60
65
70
70
75
75
80
80
90
100
0.049
0.038
0.053
0.042
0.053
0.042
0.053
0.042
0.053
0.042
0.053
0.042
0.060
0.047
0.060
0.047
0.065
0.052
0.065
0.052
0.065
0.052
0.065
0.052
0.065
0.052
0.076
0.060
0.076
0.060
0.076
0.060
0.081
0.065
0.081
0.065
0.081
0.065
0.081
0.065
0.081
0.065
0.091
0.072
0.091
0.072
0.091
0.072
0.091
0.072
0.096
0.077
0.096
0.077
0.096
0.077
0.096
0.077
0.096
0.077
0.096
0.077
0.107
0.085
0.107
0.085
18
19
20
21
22
24
28
30
33
35
38
38
40
44
45
50
55
60
60
62
65
70
74
75
80
85
90
90
95
96
100
110
120
0.034
0.023
0.041
0.028
0.041
0.028
0.041
0.028
0.041
0.028
0.041
0.028
0.041
0.028
6.3
chamfer
0.1
0.3
10
12
15
16
19
20
25
30
121808
121810
131910
142010
152110
162210
182410
202810
121812
131912
142012
152112
162212
182412
202812
121815
131915
142015
152115
162215
182415
202815
203015
253315
253515
121816
121819
121820
131920
142020
152120
162220
182420
202820
203020
253320
253520
283820
303820
304020
354420
354520
405020
121825
131925
142025
152125
162225
182425
202825
203025
253325
253525
283825
303825
304025
354425
354525
405025
121830
131930
142030
152130
162230
182430
202830
203030
253330
253530
283830
303830
304030
354430
354530
405030
455530
456030
506030
506230
506530
557030
607430
607530
253312
0.050
0.034
0.050
0.034
0.050
0.034
Housing
0.041
0.028
0.050
0.034
Length LTolerance
O.D.
d Tolerance D Tolerance
Bushing
D6
d
1.6
Shaft
Product
Information
Motion
direction
I.D.
CBB - 354450
H7
Selection Guide
CBB
303812
0.050
0.034
303815
304015
0.050
0.034
0.050
0.034
0.050
0.034
405015
152116
162216
182416
202816
203016
253316
253516
162219
202819
0.060
0.041
0.060
0.041
0.060
0.041
0.060
0.041
0.060
0.041
0.062
0.043
0.062
0.043
0.062
0.043
506020
0.062
0.043
0.073
0.051
0.073
0.051
0.073
0.051
0.073
0.051
0.073
0.051
0.073
0.051
0.076
0.054
0.076
0.054
708530
14
C0.31.0
R2
R2
Product
Information
D6
10
Sintered layer
(0.8mm or more)
1.6
L -0.1
-0.3
Back metal
35
40
50
60
70
0.1
0.3
80
90
100
120
I.D. tolerance
after press
fitting (reference)
0.034
0.023
Plastic Bearing
Length LTolerance
Selection Guide
0.01
0.034
0.023
0.034
0.023
162235
506035
0.042
0.029
253360
253560
0.042
0.029
0.042
0.029
0.042
0.029
303850
304050
354450
354550
405050
455550
456050
506050
506250
506550
557050
607450
607550
658050
708550
709050
759050
303860
304060
354460
354560
405060
455560
456060
506060
506260
506560
557060
607460
607560
658060
708560
709060
759060
809650 809660
8010050 8010060
9011050 9011060
10012050 10012060
0.042
0.029
0.042
0.029
0.053
0.037
0.053
0.037
405070
405080
0.053
0.037
0.053
0.037
456070
506070
506270
506570
557070
607470
607570
658070
708570
709070
759070
456080
506080
0.056
0.040
0.053
0.037
0.055
0.039
506580
5065100
607480
6075100
607580
658080
7085100
708580
709080
7590100
759080
7595100
759580
8096100 8096120
809670 809680
80100100 80100120
8010070 8010080
9011080 9011090 90110100 90110120
10012070 10012080 10012090 100120100 100120120
0.057
0.041
0.064
0.045
0.064
0.045
0.064
0.045
0.064
0.045
0.064
0.045
0.067
0.048
0.064
0.045
0.067
0.048
0.065
0.046
0.067
0.048
0.076
0.054
0.076
0.054
Corporate Profile
809640
8010040
0.042
0.029
Technical
Information
708535
202850
203050
253350
253550
Slide Shifter
607435
607535
0.033
0.022
Air Bearings
303835
304035
354435
354535
405035
455535
0.034
0.023
Metallic Bearing
202835
203035
253335
253535
162240
182440
202840
203040
253340
253540
283840
303840
304040
354440
354540
405040
455540
456040
506040
506240
506540
557040
607440
607540
658040
708540
Multi-layer Bearing
0.034
0.023
228
Selection Guide
CLB
CLB - 354450
Parts No.
Mating shaft
Bushing
Plastic Bearing
H6
Housing
0.8
D
d
g6
h6
Product
Information
Motion
direction
6.3
chamfer
0.01
Metallic Bearing
I.D.
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
229
12
16
20
25
30
35
40
50
60
70
80
100
0.011
0.003
0.011
0.003
0.013
0.004
0.013
0.004
0.013
0.004
0.016
0.005
0.016
0.005
0.016
0.005
0.019
0.006
0.019
0.006
0.019
0.006
0.022
0.007
18
22
28
33
38
44
50
62
74
85
96
120
0
0.008
0
0.009
0
0.009
0
0.011
0
0.011
0
0.011
0
0.011
0
0.013
0
0.013
0
0.015
0
0.015
0
0.015
C0.5
R2
R2
Sintered layer
(0.8mm or more)
G
1.6
Back metal
O.D.
d Tolerance D Tolerance
C0.5
Dh5
Multi-layer Bearing
0.005 A
16
20
25
30
40
121816
121825
162216 162220
162230
202820
202830 202840
253325 253330 253340
303830 303840
354440
405040
50
253350
303850
354450
405050
506250
607450
708550
809650
10012050
60
80
100
120
303860
354460
405060
506280
607460 607480
809680
7085100
8096120
100120100 100120120
By the combination of the highly precise article, clearance of a mating shaft and the bearings become smaller than normal combination.
When use under the foreign matter environment ,or operating frequency are high, please contact us.
The dimensional tolerances are the values measured at +25.
CLF
Selection Guide
CLF - 3060
Parts No.
Flange bushing
H6
chamfer
0.01
R1.5
0.005 A
F
Dh5
d
A
0.5
R2
Sintered layer
(0.8mm or more)
G
1.6
1.6
0.5
30
R2
Multi-layer Bearing
C0.5
Plastic Bearing
C0.5 C0.5
1.13
6.3
R0.5 or less
Housing
0.8
F
D
d
g6
h6
Mating shaft
Back metal
O.D.
0.013
0.004
0.013
0.004
0.016
0.005
0.016
0.005
0.019
0.006
0
0.011
0
0.011
0
0.011
0
0.011
0
0.013
0
0.013
38
43
48
54
60
72
84
0.2
0.3
0.2
0.3
0.2
0.3
0.2
0.3
0.2
0.3
0.2
0.3
0.2
0.3
t Tolerance
7
7
7
10
10
10
10
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
0.05
0
30
40
2030
2530
3030
2040
3540
4040
50
2550
5050
60
3060
6060
80
3580
4080
100
120
50100
60120
Slide Shifter
0.016
0.005
28
33
38
44
50
62
74
0
0.009
Air Bearings
20
25
30
35
40
50
60
0.013
0.004
Flange
Metallic Bearing
I.D.
Product
Information
Motion
direction
By the combination of the highly precise article, clearance of a mating shaft and the bearings become smaller than normal combination.
When use under the foreign matter environment ,or operating frequency are high, please contact us.
The dimensional tolerances are the values measured at +25.
Technical
Information
Corporate Profile
230
Selection Guide
CWT - 38150
Product
Information
Parts No.
Motion direction
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
231
attached.
Multi-layer Bearing
Plastic Bearing
Parts No.
CWT-2250
CWT-2275
CWT-22100
CWT-22150
CWT-2850
CWT-2875
CWT-28100
CWT-28150
CWT-3850
CWT-3875
CWT-38100
CWT-38150
CWT-4850
CWT-4875
CWT-48100
CWT-48150
Width
Length
No.
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
50
75
100
150
50
75
100
150
50
75
100
150
50
75
100
150
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
20
45
70
60
20
45
70
60
20
45
70
60
20
45
70
60
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
2
2
2
3
2
2
2
3
2
2
2
3
2
2
2
3
Selection Guide
Chamfering
Product
Information
Cross-section
Mounting bolts
16
20
18
4.4
R1 all
circumferences
90
C1 all
circumferences
6.3
10
Plastic Bearing
M820 P1.25
Parts No.
Width
Length
Thickness
No.
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
75
100
125
150
100
125
150
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
5
5
5
5
5
5
5
0.015
0.015
0.015
0.015
0.015
0.015
0.015
45
45
45
45
70
70
70
0.2
0.2
0.2
0.2
0.2
0.2
0.2
15
15
15
15
15
15
15
45
70
95
60
70
95
60
0.2
0.2
0.2
0.2
0.2
0.2
0.2
4
4
4
6
4
4
6
15
15
15
15
15
15
15
Slide Shifter
Air Bearings
CWT-7575
CWT-75100
CWT-75125
CWT-75150
CWT-100100
CWT-100125
CWT-100150
Metallic Bearing
12 or more
C2 or more
Technical
Information
2 or more
W2
W1
W2
W1
W2
2
Multi-layer Bearing
W2
Back metal
Corporate Profile
232
Selection Guide
CX
CWX - 75125
Product
Information
Parts No.
Motion direction
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
233
4C1.5
CWX-2875
CWX-28100
CWX-28125
CWX-28150
CWX-3875
CWX-38100
CWX-38125
CWX-38150
CWX-4875
CWX-48100
CWX-48125
CWX-48150
CWX-48200
CWX-48250
CWX-5875
CWX-58100
CWX-58150
CWX-7575
CWX-75100
CWX-75125
4C1.5
2
Parts No.
W1
W2
W2
Multi-layer Bearing
Plastic Bearing
4C1.5
Width
Length
No.
Chamfering
W Tolerance L Tolerance T Tolerance 1 Tolerance 2 of holes
28
28
28
28
38
38
38
38
48
48
48
48
48
48
58
58
58
75
75
75
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
75
100
125
150
75
100
125
150
75
100
125
150
200
250
75
100
150
75
100
125
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
45
50
75
100
45
50
75
100
45
50
75
100
100
100
45
50
100
25
50
75
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
15
25
25
25
15
25
25
25
15
25
25
25
50
25
15
25
25
25
25
25
2
2
2
2
2
2
2
2
2
2
2
2
2
3
2
2
2
2
2
2
C
C
C
C
B
B
B
B
B
B
B
B
B
B
B
B
B
A
A
A
Selection Guide
Chamfering
Product
Information
Type A
6
M10P.1.5
9.4
Type B
Cross-section
6.3
20
Plastic Bearing
16.8
Type C
11
Width
Length
Thickness
No.
Chamfering
W Tolerance L Tolerance T Tolerance W1 Tolerance W2 1 Tolerance 2 of holes
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
50
50
50
50
50
50
75
50
50
50
50
100
100
100
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
25
25
25
25
25
25
25
37.5
37.5
37.5
37.5
25
25
25
100
150
100
100
50
75
100
150
200
200
75
100
150
200
200
100
150
200
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
25
25
25
50
25
25
25
25
25
50
25
25
25
25
50
25
25
25
2
2
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Corporate Profile
0.1
0.3
0.1
0.3
Technical
Information
0.1
0.3
0.1
0.3
Slide Shifter
0.1
0.3
150
200
250
300
100
125
150
200
250
300
125
150
200
250
300
150
200
250
Air Bearings
75
75
75
75
100
100
100
100
100
100
125
125
125
125
125
150
150
150
Metallic Bearing
CWX-75150
CWX-75200
CWX-75250
CWX-75300
CWX-100100
CWX-100125
CWX-100150
CWX-100200
CWX-100250
CWX-100300
CWX-125125
CWX-125150
CWX-125200
CWX-125250
CWX-125300
CWX-150150
CWX-150200
CWX-150250
LHS-M1020
67.36.86
11812.0
Parts No.
Back metal
Parts No.
Nmkgfm
R2 all circumferences
2.5
6.3
Multi-layer Bearing
18
234
Selection Guide
CWXT - 100200
Product
Information
Parts No.
Motion direction
Plastic Bearing
W
Use the exclusive low-head bolt for mounting.
(LHS-M1020 is attached to CWXT series)
Cross-section
Chamfering
Type A
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
W
2
4C1.5
6.3
11
Width
Length
CWXT-100100
CWXT-100125
CWXT-100150
CWXT-100200
CWXT-100250
CWXT-100300
CWXT-125125
CWXT-125150
CWXT-125200
CWXT-125250
CWXT-125300
CWXT-150150
CWXT-150200
CWXT-150250
100
100
100
100
100
100
125
125
125
125
125
150
150
150
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
100
125
150
200
250
300
125
150
200
250
300
150
200
250
No. Chamfering
W Tolerance L Tolerance T Tolerance 1 Tolerance 2 of holes
Parts No.
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
50
75
100
150
200
200
75
100
150
200
200
100
150
200
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
25
25
25
25
25
50
25
25
25
25
50
25
25
25
2
2
2
2
2
2
2
2
2
2
2
2
2
2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
16.8
9.4
Corporate Profile
Back metal
M10P.1.5
235
18
2.5
Multi-layer Bearing
Parts No.
6.3
20
LHS-M1020
67.36.86
11812.0
CWA
Selection Guide
CWA - 18100 N
Parts No.
Product
Information
Motion direction
L
Plastic Bearing
W
Use M620 hexagon socket head bolt for
mounting.
Cross-section
Multi-layer Bearing
11
6.3
6.7
4C1.5
Parts No.
Length
No.
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
75
100
125
150
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
10
10
10
10
0.01
0.01
0.01
0.01
45
50
75
100
0.2
0.2
0.2
0.2
15
25
25
25
2
2
2
2
Air Bearings
CWA-1875N
CWA-18100N
CWA-18125N
CWA-18150N
Width
Metallic Bearing
Back metal
Slide Shifter
Technical
Information
Corporate Profile
236
Selection Guide
CWP
CWP - 58150
Product
Information
Parts No.
Motion direction
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
237
4C1
CWP-2875
CWP-28100
CWP-28150
CWP-3875
CWP-38100
CWP-38150
CWP-4875
CWP-48100
CWP-48125
CWP-48150
CWP-48200
CWP-48250
CWP-5875
CWP-58100
CWP-58150
Width
4C1
Length
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
4C1
Parts No.
W1
W
2
W2
Multi-layer Bearing
W2
Plastic Bearing
75
100
150
75
100
150
75
100
125
150
200
250
75
100
150
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
45
50
100
45
50
100
45
50
75
100
100
100
45
50
100
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
15
25
25
15
25
25
15
25
25
25
50
25
15
25
25
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
2
2
2
2
2
2
2
2
2
2
2
3
2
2
2
Chamfering
D
D
D
C
C
C
B
B
B
B
B
B
B
B
B
Selection Guide
Product
Information
Chamfering
Type A
Type B
R10 all
circumferences
R5 all
3.5 circumferences
C3 all
circumferences
Plastic Bearing
Cross-section
C3 all
circumferences
17.5
Type C
Type D
R2.5 all
circumferences
Back metal
R5 all
3.5 circumferences
11
C1 all
circumferences
Length
Thickness
Attach bolts
Chamfering
W Tolerance L Tolerance T Tolerance W1 Tolerance W2 1 Tolerance 2 Type Qty
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
50
50
50
50
50
50
50
50
50
50
50
100
100
100
0.2
25
25
25
25
25
25
37.5
37.5
37.5
37.5
37.5
25
25
25
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
25
50
75
100
150
100
100
50
75
100
150
200
200
75
100
150
200
200
100
150
200
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
25
25
25
25
25
25
50
25
25
25
25
25
50
25
25
25
25
50
25
25
25
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
2
2
2
2
2
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Corporate Profile
0.1
0.3
0.1
0.3
Technical
Information
0.1
0.3
75
100
125
150
200
250
300
100
125
150
200
250
300
125
150
200
250
300
150
200
250
Slide Shifter
75
75
75
75
75
75
75
100
100
100
100
100
100
125
125
125
125
125
150
150
150
Air Bearings
CWP-7575B
CWP-75100B
CWP-75125
CWP-75150
CWP-75200
CWP-75250
CWP-75300
CWP-100100
CWP-100125
CWP-100150
CWP-100200
CWP-100250
CWP-100300
CWP-125125
CWP-125150
CWP-125200
CWP-125250
CWP-125300
CWP-150150
CWP-150200
CWP-150250
Width
C1 all
circumferences
Metallic Bearing
Parts No.
Multi-layer Bearing
6.3
238
Selection Guide
CWPT - 125150
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
239
Motion direction
Chamfering
Cross-section
Type A
Sintered layer (1mm or more)
17.5
4C1
L
6.3
11
C3 all circumferences
Multi-layer Bearing
Plastic Bearing
Product
Information
Parts No.
Back metal
Parts No.
CWPT-100100
CWPT-100125
CWPT-100150
CWPT-100200
CWPT-100250
CWPT-100300
CWPT-125125
CWPT-125150
CWPT-125200
CWPT-125250
CWPT-125300
CWPT-150150
CWPT-150200
CWPT-150250
Width
Length
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
100
125
150
200
250
300
125
150
200
250
300
150
200
250
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
0.1
0.3
20
20
20
20
20
20
20
20
20
20
20
20
20
20
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
50
75
100
150
200
200
75
100
150
200
200
100
150
200
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
25
25
25
25
25
50
25
25
25
25
50
25
25
25
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
M10 Hexagon
socket head
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Chamfering
A
A
A
A
A
A
A
A
A
A
A
A
A
A
CWI - 10020015
Parts No.
Selection Guide
CWI
Motion direction
6.3
Width
Parts No.
50
50
100
40
150
100
150
100
150
120
150
150
100
150
150
480
480
200
480
480
200
480
200
480
200
250
420
150
250
250
T Tolerance
6
8
10
10
10
12
12
15
15
20
20
20
25
25
30
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
Air Bearings
Metallic Bearing
Multi-layer Bearing
CWI-504806
CWI-504808
CWI-10020010
CWI-4048010
CWI-15048010
CWI-10020012
CWI-15048012
CWI-10020015
CWI-15048015
CWI-12020020
CWI-15025020
CWI-15042020
CWI-10015025
CWI-15025025
CWI-15025030
Length Thickness
Plastic Bearing
Product
Information
Following table indicates mating dimensions used for application of general screws and bolts.
Plate thicknessT
10
12
15
20
K A
B K A
B K A
25
30
M16
1.5
18
26
7.5
M20
1.5
22
32
8.5
Corporate Profile
M8
M10
M10
1
1.5
12
10
12
22
19.3
23
5.0
4.65
5.0
M5
M6
M8
1.6
0.7
1.8
6.6
5.5
9
12
16
10
2.5
3
2
M5
6.711 911 11
14
9.5
11 18 1518 17.5
20
2
2.5 2.5 3 3
3.5
6.5
The values in parentheses are applicable when exclusive low-head bolt LHS-M1020 are used.
The sink dimension (A) does not conform to JIS Standard, since these are sliding materials.
Technical
Information
Slide Shifter
Type
240
Unit bearings
Feature
Usable as not only movable platens but also various types of shims and spacers.
The sliding material is made of Oiles 2000 featuring superior wear resistance.
The slide seals are attached to the slide plates, eliminating troublesome
adjustment of the slide seals after height adjustment.
The height is adjustable in 0.25 to 0.7 mm range.
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Parts No.
PAC30-90
PAC40-100
PAC50-150
PAC60-160
PAC75-180
PAC100-250
PAC125-250
PAC150-300
Sliding area
cm2
Load (Note 1)
N/2pc
kgf/2pc
85 or less
55
16.5
0.35
55
22
0.35
100
50
19,600 2,000
0.35
110
66
25,900 2,640
0.35
130
97.5
38,200 3,900
0.7
250
250
98,10010,000
0.7
250
312.5
122,60012,500
7,84012,7508001,300
0.7
300
450
176,50018,000
0.25
6,470
660
8,630
880
830
980 85 100
Corporate Profile
Technical
Information
Slide Shifter
2
Note 1Load is based on the design surface pressure of 1.96N/mm
20kgf/cm2
.
241
PAC
PAC
Selection Guide
PAC 50 - 150
Parts No.
Product
Information
Material
SS400
2000
NBRSPCC
SCM435
SCM435
S15CC-PT1/8
S60CM
W3040506075
h1
30
h2
W3
Air Bearings
h2
W3 W3
h1
Metallic Bearing
W2
W1
W1
Multi-layer Bearing
W100125150
Plastic Bearing
Part name
Table
Slide plate
Slide seal*
Adjustable push bolt
Adjustable pull bolt
Grease nipple
Spring pin
Slide Shifter
Parts No.
30
40
50
60
75
100
125
150
80
90
140
150
170
250
250
300
W1 W2 W3 1 2 3
30 M6 15
40 M6 25
45 M8 30
50 M10 35
50 M10 45
60 M12 60
60 M12 80
70 M16100
6.5
8
15
20
25
13 25 30 55
13 35 15 55
16 65 20 100
17 70 20 110
17 85 25 130
25 120 20 200
30 120 20 200
40 120 40 250
h1
20.5
23.5
28
32
33
43
43
50
h2
Corporate Profile
Adjustable bolts
Technical
Information
PAC30-90
PAC40-100
PAC50-150
PAC60-160
PAC75-180
PAC100-250
PAC125-250
PAC150-300
242
Selection Guide
Product
Information
Oiles 2000S
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
243
Service range
Lubrication condition
40120
2
kgf/cm2
Allowable max. pressure P N/mm
2949
296500
1.0060
1.631,000
The values in parentheses are static bearing pressures, which are the bearing
pressures in a pplica tions with no motion or ver y small motion ( 0.0017m/s
[0.1m/min]).
Density
JIS Z 2507
Hardness
JIS Z 2245
HRM
90
vol%
16
105 1
1.2
2
2
N/mmkgf/mm
5.7
35036
Selection Guide
Velocity0.033m/s
2.0m/min
Oscillating cycle21.2cpm
0.5
Wear amount bearing0.024mm
0.4
Product
Information
Bearing dimension6075R50
Coecient of friction
Test data
0.3
0.2
0.1
0
10
20
30
40
50
60
70
80
90
100
Test time
hrs.
Test time100hrs.
durable cycle frequency : 127,200 cycles
Ambiencein the atmosphere, room temp.
Testing conditions
Bearing dimension4050R30
Mating materialS45C quenched by high frequency
induction hardening
Ambiencein the atmosphere, room temp.
Pressure
Velocity
Lubrication
2
2
9.8N/mm100.0kgf/cm
0.167m/s
10.0m/min
Initial greasing
0.5
Wear amount bearing0.001mm
0.007mm
0.4
0.3
0.2
0.1
0
10
20
30
40
50
60
70
80
90
100
Test time
hrs.
2
2
19.6N/mm200.0kgf/cm
0.083m/s
5.0m/min
Dry
Velocity1m/s
60m/min
Test time27.8hrs.
LubricationInitial greasing
0.4
Slide Shifter
Testing conditions
Coecient of friction
Receprocation test
Air Bearings
Metallic Bearing
Test time100hrs.
Multi-layer Bearing
Coecient of friction
Lubricationinitial greasing
Plastic Bearing
Oscillating angle45
0.3
0.2
0.1
0
10
15
20
30
25
30
Test time
hrs.
10
15
20
Wear amount
m
Corporate Profile
25
Technical
Information
244
Selection Guide
Product
Information
Oiles Cermet M
Lathe turning
condition
Lubrication
Service
temperature
range
Dry
periodic
lubrication
40300
40200
40150
40150
Metallic Bearing
2 2
N/mm2
2
N/mm
kgf/cm
Allowable
max. P
pressure
Pkgf/cm
10
102
2998
296
1,000
m/sm/min
Allowable
max. V
velocity
V m/sm/min
0.50
51
30
0.85
2
2m/s
2m/min
m/skgf/cm
1.651,010
N/mm
N/mm
kgf/cm2
m/min
Allowable
max.
value
PV
PV
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
245
Rake angle
1020
0.400.80
3.25
1,990
2.45
1,500
Speed m/min
100120
Cut depth mm
0.200.30
Feed mm/rev
0.030.10
JIS Z 2507
Hardness
JIS Z 2243
HRM73
vol
105 1
1.9
25
Nose radiusmm
Density
2
2
N/mmkgf/mm
Relief angle
1.00
99
60
1.65
carbide toolJIS
Cutting tool
range
Service
6.7
Condition
Multi-layer Bearing
Plastic Bearing
Feature
13714
O.D.
Length
Selection Guide
Test data
Testing conditions
Mating materialS45C
2
2
Pressure1.96N/mm20.0kgf/cm
Velocity0.17m/s
10.0m/min
Test time100hrs.
Finishing method
0.4
0.3
0.2
0.1
0
20
40
60
80
100
Test time
hrs.
Oil impregnation is required for oil-containing OILES bearings such as Oiles Cermet M. If you purchase tube or bar
stocks, please follow the procedure below to impregnate nished products with lubrication oil before installation.
Multi-layer Bearing
Plastic Bearing
0.5
Product
Information
Coecient of friction
If these bearings are stored for a long time or if the bearings are washed, re-impregnate before installation.
minutes until no more air bubbles come up.
Cut the heat source and let it cool down to the room temperature.
Take products out of the bath to install. If oil
impregnation by heating is not possible, leave the
products in the oil bath for 24 hours or more.
Lubrication
Thermometer
Steel mesh
Heat source
Operation conditions
Low load / high speed
Types of oil
Lubrication oil of low viscosity
Mid load / mid velocity Lubrication oil with limited viscosity change by temp.
i.e.
8 to 17cst30
Spindle oil
8 to 15cst98.9
Motor oil
100 to 1000cst37
Gear oil
Technical
Information
Viscosity
Slide Shifter
Air Bearings
Oiles bearings
Metallic Bearing
Immerse the products into an oil bath. Heat the bath up to 100 to 110 . Keep the temperature for 30 to 60
Corporate Profile
246
Selection Guide
54B
54B - 121810
Parts No.
Mating shaft
Bushing
H7
6.3
Metallic Bearing
0.25 or less
Air Bearings
Slide Shifter
Technical
Information
Dr7
dE7
C0.3
I.D.
3
4
5
6
8
10
12
14
15
16
18
20
25
30
0.024
0.014
0.032
0.020
0.032
0.020
0.032
0.020
0.040
0.025
0.040
0.025
0.050
0.032
0.050
0.032
0.050
0.032
0.050
0.032
0.050
0.032
0.061
0.040
0.061
0.040
0.061
0.040
20
C0.3
C0.3
0.25 or less
C0.3 C0.5
0.1
Length LTolerance
0.3
O.D.
d Tolerance D Tolerance
6
7
8
10
12
16
18
20
21
22
24
28
35
40
0.027
0.015
0.034
0.019
0.034
0.019
0.034
0.019
0.041
0.023
0.041
0.023
0.041
0.023
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
3
030603
10
030605
040704 040705 040706
050805 050806 050808
061005 061006 061008 061010
081206 081208 081210
101606 101608 101610
121808 121810
142010
152110
162210
182410
0.049
0.028
0.059
0.034
0.059
0.034
Corporate Profile
chamfer
Multi-layer Bearing
Plastic Bearing
247
Housing
1.6
h7
Product
Information
Motion
direction
15
20
25
30
40
I.D. tolerance
after press
fitting
(reference)
0.017
0.007
0.023
0.011
0.023
0.011
0.023
0.011
081215
101615
121815
142015
152115
162215
182415
202815
0.029
0.014
101620
121820
142020
152120
162220
182420
202820
253520
304020
0.029
0.014
0.039
0.021
0.036
0.018
152125
162225
182425 182430
202830
253525 253530
304025 304030 304040
0.036
0.018
0.036
0.018
0.036
0.018
0.047
0.026
0.044
0.018
0.044
0.018
54F
Selection Guide
54F - 1212
Parts No.
Mating shaft
Flange bushing
H7
h7
F
D
d
6.3
F
Dr7
dE7
0.25 or less
C0.5
Multi-layer Bearing
0.25 or less
1
R0.3
20
C0.3
Flange side
O.D.
Flange
Length
Slide Shifter
Technical
Information
I.D. tolerance
after press
d Tolerance D Tolerance F Tolerance t Tolerance L Tolerance fitting (reference)
0
0.017
0
0
9 0.2
1.5 0.2
3 0.024
6 0.027
4.5 0.4
3
0.015
0.014
0.007
0
0.023
0
0
10 0.2
1.5 0.2
4 0.032
7 0.034
5.5 0.4
4
0.019
0.020
0.011
0.034
0.032
0
0.023
0
0
5 0.020 8 0.019 11 0.2 1.5 0.2 6.5 0.4
5
0.011
0.034
0
0.023
0
0
14
2
6 0.032
10
8
6
0.019
0.020
0.011
0.4
0.2
0.2
0
0.029
0
0
16 0.2
2
8 0.040
12 0.041
10 0.4
8
0.023
0.025
0.014
0.2
0.041
0.040
0
0.029
0
0
10 0.025 16 0.023 20 0.2 2
12 0.4 10
0.014
0.2
0.041
0.050
0
0.039
0
0
22
2
12 0.032 18 0.023
14 0.4 12
0.021
0.2
0.2
0
0.036
0
0
24 0.2
3
14 0.050
20 0.049
17 0.4
14
0.028
0.032
0.018
0.2
0.049
0.050
0
0.036
0
0
15 0.032 21 0.028 27 0.2 3
18 0.4 15
0.018
0.2
0.049
0.050
0
0.036
0
0
16 0.032 22 0.028 28 0.2 3
19 0.4 16
0.018
0.2
0.049
0
0.036
0
0
30
3
18 0.050
24
20
17
0.028
0.032
0.018
0.4
0.2
0.2
0
0.047
0
0
34 0.2
4
20 0.061
28 0.049
25 0.4
21
0.028
0.040
0.026
0.2
0.059
0.061
0
0.044
0
0
25 0.040 35 0.034 42 0.2 4
25 0.4 21
0.023
0.2
0.059
0.061
0
0.044
0
0
30 0.040 40 0.034 48 0.2 4
30
26
0.023
0.4
0.2
I.D.
Air Bearings
54F-0303
54F-0404
54F-0505
54F-0606
54F-0808
54F-1010
54F-1212
54F-1414
54F-1515
54F-1616
54F-1817
54F-2021
54F-2521
54F-3026
Metallic Bearing
Parts No.
Straight side
0.25 or less
0.25 or less
C0.3 C0.5
C0.5 C0.7
Plastic Bearing
C0.3 or R0.3
C0.3
R0.2 R0.4
chamfer
C0.3 C0.5
Housing
1.6
Product
Information
Motion
direction
Corporate Profile
248
Selection Guide
54M
54M - 2126
Product
Information
Parts No.
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
249
Parts No.
54M-0910
54M-1316
54M-1821
54M-2126
54M-2631
54M-3341
54M-4146
54M-6049
Diameter
Length
Tolerance
Tolerance
9
13
18
21
26
33
41
60
0.6
0.2
10
16
21
26
31
41
46
49
3.0
0
0.6
0.2
0.6
0.2
0.8
0
0.8
0
0.8
0
0.8
0
2.0
1.0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
Selection Guide
54S
54S - 153131
Parts No.
D
d
Product
Information
Parts No.
O.D.
d Tolerance D Tolerance
9
14
15
24
29
29
0.5
0.3
0.5
0.3
0.5
0.3
0.5
0.3
0.5
0.3
0.5
0.3
23
26
31
41
41
49
0.6
0.2
0.8
0
0.6
0.2
0.8
0
0.8
0
0.6
0.2
Length
Tolerance
33
31
31
33
36
33
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
Multi-layer Bearing
54S-092333
54S-142631
54S-153131
54S-244133
54S-294136
54S-294933
I.D.
Plastic Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
250
Selection Guide
Product
Information
Oiles Cermet G
Plastic Bearing
Service range
Slide Shifter
Air Bearings
Lathe turning
Dry
periodic lubrication
40250
40150
2
kgf/cm2
Allowable max. pressure P N/mm
10102
Technical
Information
Corporate Profile
Relief angle
25
Rake angle
1020
0.5030
0.8551
Nose radiusmm
0.400.80
0.86490
1.651,010
Speed m/min
100120
Cut depth mm
0.200.30
Feed mm/rev
0.030.10
Density
JIS Z 2507
Hardness
JIS Z 2243
HRM43
105 1
2.0
2
2
N/mmkgf/mm
6.4
13714
251
carbide toolJIS
Cutting tool
Lubrication condition
Condition
Metallic Bearing
Multi-layer Bearing
Feature
O.D.
Length
Selection Guide
Test data
1.0
Testing conditions
Bearing dimension1628R15
2
2
Mating material0.49N/mm5.0kgf/cm
Velocity0.033m/s
2.0m/min
Ambience300
Conventional sintered
copper bearing
0.6
0.4
0.2
Lubricationdry
Oiles Cermet G
0
20
40
60
80
100
Test time
hrs.
When you oil-impregnate Cemet G, please follow the procedure below to impregnate nished products with
Multi-layer Bearing
Plastic Bearing
Test time100hrs.
0.8
Product
Information
Wear amountmm
Thrast test
lubrication oil before installation. If these bearings are stored for a long time or if the bearings are washed,
Immerse the products into an oil bath. Heat the bath up to 100 to 110 . Keep the temperature for 30 to
60 minutes until no more air bubbles come up.
Cut the heat source and let it cool down to the room temperature.
Take products out of the bath to install. If oil
Metallic Bearing
Oiles bearings
Thermometer
Steel mesh
Air Bearings
Heat source
Operation conditions
Low load / high speed
Types of oil
Lubrication oil of low viscosity
i.e.
8 to 17cst30
Spindle oil
8 to 15cst98.9
Motor oil
100 to 1000cst37
Gear oil
Technical
Information
Mid load / mid velocity Lubrication oil with limited viscosity change by temp.
Viscosity
Slide Shifter
Corporate Profile
252
Selection Guide
55M
55M - 18
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
253
Product
Information
Parts No.
Parts No.
55M-11
55M-15
55M-18
55M-23
55M-31
Diameter
D Tolerance
11
15
18
23
31
0.8
0
0.8
0
0.8
0
0.8
0
0.8
0
Length
L Tolerance
21
31
21
31
31
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
Selection Guide
55S
55S - 445651
Parts No.
D
d
Product
Information
Parts No.
O.D.
Length
31
36
48
41
46
51
56
56
66
73
76
81
0.3
0.5
0.3
0.5
1.2
0
0.3
0.5
0.3
0.5
1.2
0
1.2
0
1.2
0
1.2
0
1.2
0
1.2
0
1.2
0
26
31
46
41
41
51
51
51
61
61
61
61
3.0
0
3.0
0
3.0
0
4.0
0
4.0
0
4.0
0
4.0
0
4.0
0
4.0
0
4.0
0
4.0
0
Metallic Bearing
19
24
28
29
34
34
39
44
49
51
54
56
Multi-layer Bearing
55S-193126
55S-243631
55S-284846
55S-294141
55S-344641
55S-345151
55S-395651
55S-445651
55S-496661
55S-517361
55S-547661
55S-568161
I.D.
Plastic Bearing
4.0
0
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
254
Product
Information
Selection Guide
Oiles 300
Lathe turning
Lubrication condition
Service temperature range
periodic lubrication
oil lubrication
40100
40150
2
kgf/cm2
Allowable max. pressure P N/mm
10102
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
Relief angle
510
Rake angle
25
1.0060
3.35201
Nose radiusmm
0.400.80
1.25765
3.251,990
Speed m/min
100200
Cut depth mm
0.050.30
Feed mm/rev
0.080.30
255
carbide toolJIS
Cutting tool
Service range
g/cm3
Density
Tensile strength
JIS Z 2241
2
2
N/mmkgf/mm
9810
Compressive strength
2
2
N/mmkgf/mm
29430
6.8
Condition
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
O.D.
Length
Impact strength
JIS Z 2242
J/cmkgfm/cm
20.2
Hardness
JIS Z 2246
HS20
JIS Z 2241
58,0006,000
105 1
1.1
Thermal conductivity
W/mcal/seccm
50.20.12
2
2
N/mmkgf/mm
The values shown above are typical values, not the standard values.
Selection Guide
Test data
2
2
Load resistance test / Final contact pressure20.2N/mm206.0kgf/cm
Bearing dimension2548t9
CAC403
BC3
Mating materialS55C
surface roughness 1.5mRy
Pressureinitial contact pressure
2
2
0.99N/mm10.1kgf/cm
2
2 is
0.87N/mm8.9kgf/cm
inclementally loaded every 5 minutes
CAC502A
PBC2
CAC603
LBC3
2
2
pressure20.2N/mm206.0kgf/cm
Velocity0.162m/s
9.7m/min
0.2
0.4
Lubricationin oil
0.6
0.8
1.00
1.20
1.40
Wear amountmm
Oiles 300
CAC502A
PBC2
CAC603
LBC3
S
0
0.1
0.2
Multi-layer Bearing
CAC403
BC3
F : Max. value
S : Initial value
Plastic Bearing
Final contact
Product
Information
Oiles 300
Testing conditions
Coecient of friction
Oil impregnation is required for oil-containing OILES bearings such as Oiles 300. If you purchase tube or bar
Metallic Bearing
Air Bearings
If these bearings are stored for a long time or if the bearings are washed, re-impregnate before installation.
Oiles bearings
Thermometer
Steel mesh
Slide Shifter
Heat source
Technical
Information
Mid load / mid velocity Lubrication oil with limited viscosity change by temp.
High load / low velocity Lubrication oil with high viscosity
Viscosity
i.e.
8 to 17cst30
Spindle oil
8 to 15cst98.9
Motor oil
100 to 1000cst37
Gear oil
Corporate Profile
Types of oil
256
Selection Guide
30B
30B - 081012 T
Parts No.
Mating shaft
Bushing
H7
D
d
6.3
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
D
d
C0.3
C0.3
C0.3
C0.3
I.D.
5
6
8
10
12
12
14
14
16
16
18
20
0.058
0.040
0.058
0.040
0.062
0.040
0.068
0.046
0.081
0.054
0.081
0.054
0.081
0.054
0.081
0.054
0.081
0.054
0.089
0.062
0.089
0.062
0.105
0.072
Length LTolerance
O.D.
d Tolerance D Tolerance
257
chamfer
Multi-layer Bearing
Plastic Bearing
Housing
1.6
h7
Product
Information
Motion
direction
7
8
10
12
14
16
16
18
18
20
22
24
0.034
0.019
0.034
0.019
0.034
0.019
0.041
0.023
0.041
0.023
0.041
0.023
0.041
0.023
0.041
0.023
0.041
0.023
0.049
0.028
0.049
0.028
0.049
0.028
10
0.2
12
15
20
30
I.D. tolerance
after press
fitting
(reference)
0.030
0.012
060810T
081010T
101210T
121410T
121610T
141610T
141810T
161810T
T162010
0.030
0.012
081012T
101212T
121412T
121612T
141612T
141812T
0.034
0.012
101215T
121415T
121615T
141615T
141815T
161815T
162015T
0.034
0.012
121420T
121620T
141620T
141820T
161820T
162020T
182220T 182230T
202420T 202430T
0.047
0.020
0.047
0.020
0.047
0.020
0.047
0.020
0.047
0.020
0.047
0.020
0.047
0.020
0.063
0.030
Thin wall
Selection Guide
Regular press-fitting
Load
Load
Mandrel
Figure 1
The dimension of guide ring should be calculated
from table below.
Bushing I.D.
Up to 20
D0
0.05 to 0.10
d0D0
O.D.
D1
d1D1
0.20 to 0.30
RL
d1
L
d0
D1
0.1 to 0.3 D1
10 to 15
Mandrel
Bushing
Guide ring
D1
0.10.3
Figure 2
Press-fit force
Air Bearings
Housing chamfer
Metallic Bearing
D1
D0
D1
1015
Length
Housing
Dimension of mandrel
I.D.
Guide ring
Multi-layer Bearing
Dimension of bushing
Bushing
Plastic Bearing
Product
Information
Slide Shifter
Technical
Information
Corporate Profile
258
Selection Guide
30B
30B - 253720
Parts No.
Mating shaft
Bushing
H7
D
d
6.3
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
chamfer
I.D.
259
Housing
1.6
h7
Product
Information
Motion
direction
O.D.
d Tolerance D Tolerance 5
5
6
8
10
10
10
12
12
14
14
15
16
16
18
18
20
20
22
22
25
25
25
28
28
30
30
30
32
32
0.058
0.040
0.058
0.040
0.068
0.046
0.068
0.046
0.068
0.046
0.068
0.046
0.068
0.041
0.068
0.041
0.068
0.041
0.068
0.041
0.068
0.041
0.068
0.041
0.068
0.041
0.068
0.041
0.068
0.041
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.112
0.073
0.112
0.073
8
10
12
14
16
18
18
20
20
22
22
22
25
25
28
28
30
30
32
33
35
37
38
40
38
40
42
42
45
0.034
0.019
0.034
0.019
0.041
0.023
0.041
0.023
0.041
0.023
0.041
0.023
0.041
0.023
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
10
12
15
16
20
25
30
35
40
I.D. tolerance
after press
50 fitting (reference)
0.030
0.012
0.030
0.012
0.034
0.012
0.034
0.012
0.045
0.023
0.045
0.023
0.045
0.018
0.040
0.013
0.040
0.013
0.040
0.013
0.040
0.013
0.040
0.013
0.040
0.013
0.040
0.013
0.040
0.013
0.060
0.027
0.060
0.027
0.060
0.027
0.054
0.021
0.054
0.021
0.054
0.021
0.054
0.021
0.054
0.021
0.054
0.021
0.054
0.021
0.054
0.021
0.054
0.021
0.078
0.039
0.078
0.039
Selection Guide
12
Chamfering for the bush length of
5 and 6mm are C0.3
a: Chamfering
d 22 95
a
C0.3 C0.5
Product
Information
100
C1 mm
20
I.D.
0.112
0.073
0.112
0.073
0.112
0.073
0.112
0.073
0.112
0.073
0.112
0.073
0.144
0.098
0.144
0.098
0.144
0.098
0.144
0.098
0.144
0.098
0.144
0.098
0.144
0.098
0.144
0.098
0.144
0.098
0.144
0.098
0.188
0.134
0.188
0.134
0.188
0.134
0.188
0.134
0.188
0.134
0.188
0.134
0.073
0.041
0.073
0.041
0.073
0.041
354540
354840
405040
405540
455540
456040
506040
506540
354550
354850
405050
405550
455550
456050
506050
506550
557050
557550
607550
608050
0.073
0.041
0.073
0.041
0.073
0.041
0.073
0.041
0.073
0.041
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.089
0.051
0.108
0.063
80
100
120
0.078
0.039
0.078
0.039
0.078
0.039
0.070
0.031
0.070
0.031
0.070
0.031
506060
506560
557060
557560
607560
608060
658060
658560
708560
709060
759060
759560
809560
8010060
0.070
0.031
0.070
0.031
0.102
0.056
0.102
0.056
607580
608080
658080
658580
708580
709080
759080
759580
809580
8010080
8510080
8510580
9011080
9011580
9511580
9512080
10012080
10012580
0.102
0.056
0.102
0.056
0.102
0.056
0.092
0.046
0.092
0.046
0.092
0.046
0.092
0.046
0.092
0.046
8095100
80100100
85100100
85105100
90110100
90115100
95115100
95120100
100120100
100125100
0.092
0.046
0.092
0.046
0.136
0.082
0.136
0.082
0.136
0.082
0.136
0.082
0.136
0.082
0.136
0.082
100120120
100125120
0.136
0.082
0.123
0.069
Corporate Profile
0.188
0.134
0.073
0.041
354530
354830
405030
405530
60
Technical
Information
0.188
0.134
0.073
0.041
50
Slide Shifter
0.144
0.098
0.059
0.034
40
Air Bearings
0.144
0.098
0.059
0.034
30
I.D. tolerance
after press
fitting (reference)
Metallic Bearing
0.112
0.073
45
48
50
55
55
60
60
65
70
75
75
80
80
85
85
90
90
95
95
100
100
105
110
115
115
120
120
125
0.059
0.034
Length L 00.4
Multi-layer Bearing
35
35
40
40
45
45
50
50
55
55
60
60
65
65
70
70
75
75
80
80
85
85
90
90
95
95
100
100
Length L 00.2
O.D.
d Tolerance D Tolerance
0.112
0.073
Plastic Bearing
260
Selection Guide
30F
30F - 3040
Parts No.
Mating shaft
Flange bushing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
261
H7
F
D
d
C
F
D
d
5
6
8
10
12
14
15
16
18
20
22
25
28
30
32
35
40
45
50
55
60
0.058
0.040
0.068
0.046
0.068
0.046
0.068
0.041
0.068
0.041
0.068
0.041
0.068
0.041
0.068
0.041
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.088
0.055
0.112
0.073
0.112
0.073
0.112
0.073
0.112
0.073
0.112
0.073
0.144
0.098
0.144
0.098
8
10
12
16
18
20
21
22
25
28
30
35
38
40
42
45
50
55
60
70
75
0.034
0.019
0.041
0.023
0.041
0.023
0.041
0.023
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.049
0.028
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.059
0.034
0.073
0.041
0.073
0.041
0.073
0.041
0.073
0.041
11
14
20
23
25
27
28
29
33
38
40
45
48
50
52
60
65
70
75
85
90
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
0
0.3
1.5
2
2
3
3
3
3
3
3.5
4
4
5
5
5
5
5
5
5
5
7.5
7.5
20
Flange
a b c: Chamferingmm
d 22 50 60
a
C0.5 C1
C1.5
d 22 50 60
b
R0.3 R0.5
R1
d 22 60
c
C0.3 C0.5
0.058
0.040
chamfer
12
O.D.
6.3
Multi-layer Bearing
Plastic Bearing
I.D.
Housing
1.6
h7
Product
Information
Motion
direction
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
10 12 15 20 25 30 40 50 60 80
0505 0508
0608 0610
0810
1010
1210
1410
1510
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
I.D. tolerance
after press
fitting
(reference)
0.030
0.012
0.030
0.012
0812
1012
1212
1412
1512
1612
0815
1015
1215
1415
1515
1615
1815
2015
2215
2515
0.034
0.012
1020
1220
1420
1520
1620
1820
2020
2220
2520
0.045
0.023
1225
1425
1525
1625
1825
2025
2225
2525
2825
0.045
0.018
0.040
0.013
1530
1630
1830
2030
2230
2530
2830
3030
3230
3530
0.040
0.013
0.040
0.013
0.040
0.013
2040
2240
2540
0.060
0.027
0.060
0.027
0.054
0.021
0.054
0.021
3040
3240
3540
4040 4050
4540 4550
5050 5060
5550 5560
6060 6080
0.054
0.021
0.078
0.039
0.078
0.039
0.078
0.039
0.070
0.031
0.070
0.031
0.102
0.056
0.102
0.056
Selection Guide
30W
30W - 1803
Parts No.
D
d
P.C.D
Product
Information
T
Countersink type
C0.5
1
I.D.
O.D.
d Tolerance D
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.2
0.1
0.3
0.1
3
3
3
3
3
3
5
5
5
5
7
7
8
0
0.1
no attach hole
0
0.1
no attach hole
0
0.1
no attach hole
0
0.1
no attach hole
0
0.1
no attach hole
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
0
0.1
35
35
40
45
50
60
70
75
2
2
2
2
2
2
2
4
M3
M5
M5
M5
M5
M6
M6
M6
Technical
Information
0.2
0.1
Countersink
T Tolerance P.C.D of No.
holes screw size
Slide Shifter
0.2
0.1
30
40
40
40
50
50
50
55
60
70
80
90
100
Mounting hole
Air Bearings
10.2
12.2
13.2
14.2
16.2
18.2
20.2
25.2
30.2
35.2
40.2
45.2
50.3
Thickness
Metallic Bearing
30W-1003N
30W-1203N
30W-1303N
30W-1403N
30W-1603N
30W-1803
30W-2005
30W-2505
30W-3005
30W-3505
30W-4007
30W-4507
30W-5008
C0.5
C0.5
Parts No.
C0.5
C0.5
D
d
C0.5
1
C0.51
Multi-layer Bearing
D
d
C0.51
No hole type
P.C.D
Plastic Bearing
Corporate Profile
262
Selection Guide
30M
30M - 40
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
263
Product
Information
Parts No.
Parts No.
30M-15
30M-21
30M-23
30M-25
30M-27
30M-31
30M-33
30M-35
30M-37
30M-40
30M-43
30M-45
30M-47
30M-50
30M-55
30M-60
30M-65
30M-70
30M-80
30M-90
30M-100
Diameter
D Tolerance
15
21
23
25
27
31
33
35
37
40
43
45
47
50
55
60
65
70
80
90
100
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
0.5
0
0.5
0
0.5
0
Length
Tolerance
150
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
250
250
250
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
1.0
0
1.0
0
1.0
0
30S
Selection Guide
30S - 6986
Parts No.
D
d
Product
Information
O.D.
d Tolerance D Tolerance
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
Tolerance
100
100
150
150
150
200
200
200
200
200
200
200
200
200
200
200
200
200
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
30S-7491
30S-7496
30S-7996
30S-79101
30S-84106
30S-89111
30S-94121
30S-99126
30S-103132
30S-103142
30S-108137
30S-108147
30S-113142
30S-113152
30S-118147
30S-118157
30S-123152
30S-123162
I.D.
O.D.
d Tolerance D Tolerance
74
74
79
79
84
89
94
99
103
103
108
108
113
113
118
118
123
123
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
91
96
96
101
106
111
121
126
132
142
137
147
142
152
147
157
152
162
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
Length
Tolerance
200
200
200
200
200
200
200
200
250
250
250
250
250
250
250
250
250
250
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
3.0
0
Slide Shifter
Thick wall
Parts No.
O.D.
d Tolerance D Tolerance
0
1.0
0
1.0
0
1.0
0
1.0
70
75
80
90
100
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
Tolerance
200
200
200
200
200
3.0
0
3.0
0
3.0
0
3.0
0
Parts No.
30S-60110
30S-65120
30S-70130
30S-80140
I.D.
O.D.
d Tolerance D Tolerance
60
65
70
80
0
1.0
0
1.0
0
1.0
0
1.0
110
120
130
140
1.0
0
1.0
0
1.0
0
1.0
0
3.0
0
Length
Tolerance
200
250
250
250
3.0
0
3.0
0
3.0
0
3.0
0
Corporate Profile
35
40
45
50
55
0
1.0
Length
Technical
Information
30S-3570
30S-4075
30S-4580
30S-5090
30S-55100
I.D.
Air Bearings
0
1.0
1.0
0
41
43
46
49
53
51
56
56
61
61
66
71
71
76
81
86
86
91
Parts No.
Metallic Bearing
29
31
34
34
37
39
39
44
44
49
49
54
59
59
64
64
69
69
Length
Multi-layer Bearing
30S-2941
30S-3143
30S-3446
30S-3449
30S-3753
30S-3951
30S-3956
30S-4456
30S-4461
30S-4961
30S-4966
30S-5471
30S-5971
30S-5976
30S-6481
30S-6486
30S-6986
30S-6991
I.D.
Plastic Bearing
Parts No.
264
Selection Guide
Product
Information
Oiles 600
Plastic Bearing
Service range
Slide Shifter
Air Bearings
Lathe turning
periodic lubrication
40150
2
kgf/cm2
Allowable max. pressure P N/mm
15153
Technical
Information
Corporate Profile
Relief angle
510
Rake angle
25
1.65
99
5.00300
Nose radiusmm
0.400.80
1.651,010
3.251,990
Speed m/min
100200
Cut depth mm
0.050.30
Feed mm/rev
0.080.30
Density
Tensile strength
JIS Z 2241
2
2
N/mmkgf/mm
15015
Impact strength
JIS Z 2242
2
2
J/cmkgfm/cm
101
Hardness
JIS Z 2243
JIS Z 2241
Thermal conductivity
2
2
N/mmkgf/mm
8.5
HB60
O.D.
Length
83,0008,500
105 1
1.8
W/mcal/seccm
71.10.17
The values shown above are typical values, not the standard values.
265
carbide toolJIS
oil lubrication
Cutting tool
Lubrication condition
Condition
Metallic Bearing
Multi-layer Bearing
Feature
Selection Guide
36M
36M - 36
Parts No.
Length
Need
Length
D Tolerance
16
21
26
31
36
41
46
51
56
61
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
Tolerance
202
202
202
202
202
202
202
202
202
202
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
Multi-layer Bearing
36M-16
36M-21
36M-26
36M-31
36M-36
36M-41
36M-46
36M-51
36M-56
36M-61
0.5
0
Plastic Bearing
1.0
0
1.0
0
1.0
0
Metallic Bearing
36S
Diameter
Parts No.
Product
Information
36S - 3451
Parts No.
D
d
Air Bearings
L
Inner and outer diameter and Length shown
here are rough finished dimensions.
O.D.
d Tolerance D Tolerance
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
31
36
36
41
46
46
51
51
66
56
61
71
81
86
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
0.5
0
Tolerance
202
202
202
202
202
202
202
202
202
202
202
202
202
202
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
1.0
0
Corporate Profile
19
19
24
29
29
34
34
39
39
44
49
49
59
69
Length
Technical
Information
36S-1931
36S-1936
36S-2436
36S-2941
36S-2946
36S-3446
36S-3451
36S-3951
36S-3966
36S-4456
36S-4961
36S-4971
36S-5981
36S-6986
I.D.
Slide Shifter
Parts No.
266
267
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Air Bearings
Oiles Air Bearings P.269
268
Selection Guide
Product
Information
Plastic Bearing
Cut surface
Back metal
Metallic Bearing
Multi-layer Bearing
Customization
Safety
Oil-less bearings are hard to seize even under the solid body
contact condition, feature superior safety, and are easy to
handle.
Economical
Environment
Pore
Solid lubricant
269
Porous
Compensation form
Orifice compensation
Inherent-orifice compensation
Image
Inherent-orifice
Machined
small holes
Orifice
Air supply
groove/hole
Surface
Air supply
groove/hole
Surface compensation
Low
Corporate Profile
Technical
Information
Porous compensation
High
Air supply
groove/hole
Slide Shifter
Air Bearings
Image
Selection Guide
Product
Information
NRRO:0.03m
TIR:0.15m
Performance comparison tests with disc bearings and other manufacturers porous materials
Bearing surface diameter: 78 mm
Supply air pressure (gauge pressure): 0.5 MPa
2000
1500
1000
Air bearing
500
10
Lift amountm
15
20
Mating
surface
Air film
(bearing clearance)
OAB
Other manufacturer s product
Slide Shifter
Y-direction displacementm
Air Bearings
220
200
180
160
140
120
100
80
60
40
20
0
X-direction displacementmm
10
15
20
X-direction displacementmm
Corporate Profile
OAB
If the lift amount is 6 m, for example, the Oiles Air Bearing
demonstrates approximately 1.5 times as large rigidity and
approximately 1.2 times as high load capacity as other
manufacturer s product.
Technical
Information
Lift amountm
Y-direction displacementm
Bearing rigidityN/m
State of measurement
(Non-contact type electrostatic displacement gauge is used.)
Metallic Bearing
Load capacityN
OAB
Other manufacturer s product
Multi-layer Bearing
Comparison tests of
bearing performance
values
Plastic Bearing
Supply air is obtained uniformly through minute pores all over the bearing surface.
270
Selection Guide
Product
Information
Customization
Performances
The OAB can adjust the flow rate, different from the conventional porous compensations.
It offers customization for high-rigidity, high-speed and other applications according to the use conditions.
100N
Load capacity
50N/m
Rigidity
30N/m
Rigidity
5NL/min or less
Flow rate
10NL/min or less
Customizes performances (allowable loads, rigidity and ow rates) in the same dimensions.
Contact our sales office for details.
Shapes
20mm
Small-diameter bushing
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Flow rate
150N
Load capacity
271
Custom-made products
Selection Guide
Product
Information
Plastic Bearing
Metallic Bearing
Air Spindles
Multi-layer Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
272
273
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
P.275
P.279
P.289
P.293
P.295
P.299
P.307
P.311
P.315
P.319
P.323
P.324
P.325
P.326
P.327
P.329
274
Selection Guide
STC/STF GR
Component PartsAccuracy
STC20 Compact type
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
C
H
Air Bearings
Component Parts
W
B
No.
Technical
Information
Slide Shifter
B2
Material
S45Chard chrome-plated (Plating thickness 15or more)
FCD450
Oiles metal
Oiles metal
Hex socket head cap bolt
Hex socket head cap bolt
A-PF1/8
Polyurethane
SPCC rust proof
Accuracy
(Unit: mm)
Accuracy
Items
Running parallelism of side C with respect to side A
Running parallelism of side D with respect to side B
Tolerance of H dimension
Tolerance of W dimension
Corporate Profile
B1
275
L3
Name
Guide rail
Shift table
Liner
Gib
Adjust pull bolt
Adjust push bolt
Grease nipple
Seal
Seal fixing plate
fixing screws
Liner fixing bolts
guide rails.
Selection Guide
Service Range
Allowable load
Dynamic allowable load: Allowable load in the condition with sliding speed of 1.0 m/s60 m/minor less.
Do not use STC20 in lateral or hanging position.
2 tables on 1 rail
4 tables on 2 rails
My
Mr
L2
TL
Mr
My
L1
STC20
STF38
STF48
Static
Dynamic
Static
Dynamic
Static
Dynamic
Static
Dynamic
10,8001,100
3,430 350
Allowable momentNmkgfm
Moment direction
Mp
Mr
My
Cases
49 5
15 1.5
1 rail 2 tables
2
44 4.5
1,370140L2
180 18
2,940300L2
290 30
5,100520L2
440 45
Air Bearings
STC28
STF28
Type
Allowable loadNkgf
Table position
Upright
Lateral
Hanging
Metallic Bearing
Parts No.
Mp
Multi-layer Bearing
Mp
Plastic Bearing
Allowable Moment
Product
Information
Static allowable load: Allowable load when it is born in the stationary condition or at quite low speed near stopping (not
more than 0.0017 m/s [0.1 m/min.])
8,830900L2
Slide Shifter
Allowable Velocity
Lubrication conditions
Remarks
Dry
0.5m/s30m/min
Periodical lnbrication
1.0m/s60m/min
Greasing is needed if the stroke is 1 meter or more or the allowable wear amount is small.
Parts No.
Fs
STC20
STC28
STF28
STF38
STF48
9.8N1.0kgf
12N1.2kgf
12N1.2kgf
15N1.5kgf
18N1.8kgf
Technical
Information
Seal Friction Fs
Corporate Profile
276
TW
W1
TH
TH
W2
L3
B1
TW
W1
Flange type
Specify by
Rail
STF Width
Parts No.
Parts No.
STC20
STC28
STF28
STF38
STF48
TH
30
50
50
65
82
TW
45
60
90
110
140
TL
56
70
78
100
120
STC20
W1 W2
30 12.75
44 16
72 31
90 36
116 46
L1
40
50
60
80
95
4-D1
B1
B2
TL
L1
L2
L2
H1
H2
Parts No.
L2
H3
Specify by
L3
Rail
STC Width
TL
L1
L2
W2
B2
Product Identification
Compact type
H1 4-D1
H2
L2
H3
L2
TH
W2
L2
5.5
6
2.0
2.6
3.9
L3
28
19
23
25
30
D1
H1
H2
M8
8.5 9.5
M8
5
17.5
M10 10
17.5
M10 15
25
M12 20
30
H3
6
8
8
10
11
L3
B1
B1
M510
M610
M616
M818
M822
B2
Weight kg
M88
M1010
M1010
M1212
M1215
0.32
0.90
0.94
2.30
4.95
B2
Guide Rails
Product Identification
Specify by
P
RW2
GR Width - Length
Parts No.
GR20-1000
D3
RW1
D2
D4
RH
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
H1 4-D1
H2
TW
W1
277
Shift Tables
H3
Selection Guide
Product
Information
STC/STF GR
PN1
L
Parts No.
GR20-300
GR20-500
GR20-1000
GR20-1500
GR20-2000
GR28-300
GR28-400
GR28-600
GR28-1000
GR28-1500
GR28-2000
GR38-400
GR38-600
GR38-900
GR38-1200
GR38-1500
GR38-2000
GR48-600
GR48-900
GR48-1200
GR48-1500
GR48-2000
RW1
19.5
19.5
19.5
19.5
19.5
28
28
28
28
28
28
38
38
38
38
38
38
48
48
48
48
48
RW2
19.5
19.5
19.5
19.5
19.5
28
28
28
28
28
28
38
38
38
38
38
38
48
48
48
48
48
RH
22
22
22
22
22
32
32
32
32
32
32
42
42
42
42
42
42
52
52
52
52
52
L
300
500
1000
1500
2000
300
400
600
1000
1500
2000
400
600
900
1200
1500
2000
600
900
1200
1500
2000
A
Number of holes N
6
25
10
25
20
25
30
25
40
25
4
30
5
40
8
20
13
20
19
30
25
40
4
42.5
6
37.5
9
30
12
22.5
15
15
19
55
6
37.5
30
9
22.5
12
15
15
55
19
P
50
50
50
50
50
80
80
80
80
80
80
105
105
105
105
105
105
105
105
105
105
105
D2
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
9
9
9
9
9
9
11
11
11
11
11
D3
11
11
11
11
11
11
11
11
11
11
11
14.2
14.2
14.2
14.2
14.2
14.2
17.5
17.5
17.5
17.5
17.5
D4
7
7
7
7
7
7
7
7
7
7
7
12
12
12
12
12
12
15
15
15
15
15
0.8
1.4
2.8
4.2
5.6
1.5
2.0
3.0
5.0
7.5
10.0
3.7
5.6
8.4
11.2
14.0
18.5
9.2
13.8
18.4
23.0
30.5
Selection Guide
Product Identification
Specify by
GR Width - Length
Parts No.
N2
LP
A=
2
2
3
3
4
4
5
5
6
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
17
18
19
19
47.5
20
45
17.5
42.5
15
40
12.5
37.5
62.5
35
60
32.5
57.5
30
55
27.5
52.5
25
50
22.5
47.5
20
45
17.5
42.5
15
40
12.5
37.5
10
35
60
32.5
30
55
P=105
2
3
3
4
4
5
5
6
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
17
18
19
19
A=
221
109050
=20
2
The end dimension = 20 mm and the number of mounting holes = 22 are found.
Corporate Profile
47.5
20
45
17.5
42.5
15
40
12.5
37.5
62.5
35
60
32.5
57.5
30
55
27.5
52.5
25
50
22.5
47.5
20
45
17.5
42.5
15
40
12.5
37.5
10
35
60
32.5
30
55
(Unit: mm)
GR48
Technical
Information
N1
LP
A=
2
P=105
Slide Shifter
Select the number of mounting holes of the longer rail shown above if the required length
is shorter than the listed L. For dimensions not shown above, select the special-dimension
guide rail that accommodates the necessary dimension in the above table and find the value
of A (end dimension) from its P (mounting pitch) and N (number of mounting holes) using the
following expression. The dimensions of both ends must be the same.
2
3
3
4
5
5
6
7
7
8
8
9
10
10
11
12
12
13
13
14
15
15
16
17
17
18
18
19
20
20
21
22
22
23
23
24
25
25
GR38
Air Bearings
35
20
45
30
15
40
25
10
35
20
45
30
15
40
25
10
35
20
45
30
15
40
25
10
35
20
45
30
15
40
25
10
35
20
45
30
15
40
P=80
Metallic Bearing
N
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
GR28
Multi-layer Bearing
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
P=50
P
N1
Plastic Bearing
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
GR20
GR20-450
Product
Information
278
Selection Guide
STE/STFE GRE
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Component PartsAccuracy
STE20 Compact type
Slide Shifter
Component Parts
Corporate Profile
Technical
Information
No.
279
Name
Material
S45C (Oxide coating)
FCD450
Oiles metal
Oiles metal
A-M6F
Urethane rubber
SPCC rust proof
Fixing screws
Guide rail
Shift table
Liner
Gib
Grease nipple
Dust seal
Selection Guide
Service Range
Allowable Load
Dynamic allowable load: Allowable load in the condition with sliding speed of 1.0 m/s60 m/minor less.
Do not use STC20 in lateral or hanging condition.
Parts No.
STE20
STFE28
Multi-layer Bearing
STE28
Plastic Bearing
Allowable loadNkgf
Table position
Type
Upright
7,540 769
Static
2,400 245
Dynamic
12,350
1,260
Static
4,110
419
Dynamic
12,350
1,260
Static
4,110 419
Dynamic
Allowable Velocity
Allowable max velocity
Remarks
Dry
0.5m/s30m/min
Periodical lubrication
1.0m/s60m/min
Metallic Bearing
Lubrication conditions
Greasing is needed if the stroke is 1 meter or more or the allowable wear amount is small.
Seal Friction Fs
STE20
STE28
STFE28
49.8N5.0kgf
62N6.3kgf
62N6.3kgf
Air Bearings
Parts No.
Fs
Product
Information
Static allowable load: Allowable load when it is born in the stationary condition or at quite low speed near stopping (not
more than 0.0017 m/s [0.1 m/min.])
mm
mm
0.4
0.3
0.2
0.1
0
WLoad N
10
12
1.5
1.0
STE20
STE28/STFE28
0.5
0
10
WLoad N
15
20
Corporate Profile
Technical
Information
2Vertical displacement
1Horizontal displacement
Slide Shifter
The table may possibly be displaced if a side load is applied to it in the stationary or almost stationary condition. Check
the following drawings and check the displacement positions.
280
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
TW
W1
H2
L3
W2
Specify by
TH
30
50
50
TW
W1
STFE28
Parts No.
Parts No.
STE20
STE28
STFE28
TL
L1
L2
L3
TW
45
60
90
TL
56
78
78
W1
30
44
72
4-D1
STE20
W2
12.75
16
31
L2
H1
H2
Parts No.
L2
H3
Specify by
TL
L1
Rail
STE Width
L2
W2
Product Identification
Compact type
H1
4-D1
H2
L2
TH
L2
TH
H3
H1 4-D1
TH
TW
W1
W2
L1
40
50
60
L3
L2
5.5
6.0
6.0
L3
28
23
23
D1
M8
M8
M10
H1
8.5
5
11
H2
9.5
17.5
17.5
H3
6
8
8
Weight kg
0.32
0.90
0.94
Guide Rails
Product Identification
GRE
Width - Length
Parts No.
GRE28-1000
D3
D4
Specify by
RW2
RH
281
Shift Tables
H3
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
STE/STFE GRE
D2
RW1
PN1
L
Parts No.
GRE20-300
GRE20-500
GRE20-1000
GRE20-1500
GRE20-2000
GRE28-300
GRE28-400
GRE28-600
GRE28-1000
GRE28-1500
GRE28-2000
RW1
19.5
19.5
19.5
19.5
19.5
28
28
28
28
28
28
RW2
19.5
19.5
19.5
19.5
19.5
28
28
28
28
28
28
RH
22
22
22
22
22
32
32
32
32
32
32
L
300
500
1000
1500
2000
300
400
600
1000
1500
2000
No. of holes N
50
50
50
50
50
70
40
60
20
30
40
3
5
10
15
20
2
3
4
7
10
13
P
100
100
100
100
100
160
160
160
160
160
160
D2
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
D3
11
11
11
11
11
11
11
11
11
11
11
D4
7
7
7
7
7
7
7
7
7
7
7
Selection Guide
Product Identification
Specify by
GRE
Width - Length
P
N1
N1
LP
A=
N2
LP
111
1090100
=45
A=
2
2
2
2
3
3
3
4
4
4
4
5
5
5
6
6
6
7
7
7
8
8
8
9
9
9
9
10
10
10
11
11
11
12
12
12
13
13
Corporate Profile
20
45
70
15
40
65
10
35
60
85
30
55
80
25
50
75
20
45
70
15
40
65
10
35
60
85
30
55
80
25
50
75
20
45
70
15
40
Technical
Information
N
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
P=160
Slide Shifter
A
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
25
50
GRE28
Air Bearings
End dimension
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
GRE20
Metallic Bearing
Multi-layer Bearing
A=
(Unit: mm)
P=100
Plastic Bearing
GRE20-450
Select the proper mounting pitch P shown in the right
table according to the series.
The end dimension A is the same at both ends.
The end dimension A should be 10 mm or more.
Select the proper number of mounting holes
appropriate to the design guide rail length in the right
table.
Select the number of mounting holes of the longer
rail if the required length is shorter than the listed L.
Product
Information
Parts No.
282
Product
Information
Selection Guide
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Table
Flexible
Rail
No.
Fix
Name
Flexible bellows
Fix bellows
Slide Plate
Clamp Plate
End Plate
Determine the positions of the bolts for fixing the rail at both
Material
15mm or more
PVC
SPCC
SPCC
Exclusive bolt hole cap (plastic) is available to keep out the dust from bolt holes.
4.7
11.1
CP-10for M10
14.8
14.1
12
18.4
17.6
15.3
0.4
Technical
Information
Corporate Profile
283
CP-8for M8
3.7
CP-6for M6
3.8
Slide Shifter
2-R0.3
Parts No.
R0.5
Bolt Size
Rails
CP-6
M6
GR2028GRE2028
CP-8
M8
GR38
CP-10
M10
GR48
4-R0.5
4-R0.5
0.4
0.5
Selection Guide
CAUTION
Flexible Bellows
Parts No.
h2
W1
Product
Information
28J - A - 100 - T
h1
28JK - 140 - T
2-Mscrew hole
RH
R1
R2
Parts No.
Parts No.
size Expansion
ratio
WH Bellows
WJHJ
A
Stroke
Expansion
ratio
Stroke
h1
h2 W1 RH R1 R2
Applicable
tables
4530
5232
under 1100
22
10 M310 M48
STC20
STE20
28J
9050
6040
under 1100
32
18 M310 M48
38J
48J
STC28
STF28
STE28
STFE28
11065
8052
42
10
24 M412 M510
STF38
14082 10167
10
under 1300
under 1300
52
12
30 M612 M610
STF48
Expansion ratio B is the ratio when more than 2 bellows are used by connecting together.
Calculating formula
Length of Bellows
Metallic Bearing
20J
Multi-layer Bearing
End plate of 20J sticks out 8mm from the table surface.
Plastic Bearing
H
HJ
Fix Bellows
S
L min= A1L max=L minA
L max
S
L min= B1L max=L minB
L min
L min
Air Bearings
L=L min2S1
L=L minS1
In case of standard guid rails, L min dimension needs to be adjusted.
LS1
2
Calculation example
Expression of calculating the bellows length is L min=
L min =
400
=100mm
51
S
A1
400300=900mm
L1 =1002
Corporate Profile
S1
Required rail length L1=L min2
Technical
Information
L min=
Slide Shifter
S: Stroke
A, B: Expansion ratio of bellows
L max: Expanded length of bellows
L min: Shortened length of bellows
1 : Table length
2 : Fix bellows length
L: Rail length
284
Selection Guide
Clearance
adjusting side
mark side
(S Type only)
h1 h2 h3
Plastic Bearing
Product
Information
Guide rail
datum surface
Shift table
datum surface
24mm
Recess
(Unit: mm)
The guide rail and shift table have their own datum
surface for correct installation.
The datum surface of the guide rail is the datum mark
side (side B). That of the shift table is the opposite side
(side D) to the
mark.
Technical
Information
Corporate Profile
285
Parts No.
GR20GRE20
GR28GRE28
GR38
GR48
W
19.5
28
38
48
0.08
0.05
0.08
0.05
0.08
0.05
0.08
0.05
Parts No.
GR20GRE20
GR28GRE28
GR38
GR48
h1
h2
34
46
58
58
10
h3
R mating corner
R0.5 or less or recess
8 R1.5 R1 or less or recess
10 R1.5 Ditto
11 R2 R1.5 or less or recess
6 R1
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Make a groove along the guide rail axis. Press the rail
insert drill rods and rails into the grooves, and fix the
rails while pressing the drill rods. (See Fig. 1.)
Other procedures as shown below:
Install a rigid plate on a planar base, and install the
rail to fit this plate. (See Fig. 2.)
Make stages on the mating base with a planer or
milling machine, press the datum surface of the rail
against the machined surface with a vice or bolts and
auxiliary plate, and fix the rail. (See Figs. 3, 4 and 5.)
Datum
surface
Datum
surface
Datum
surface
W
h
23
34
(Fig. 1)
(Fig. 2)
Datum
surface
(Fig. 3)
Datum
surface
45
45
(Fig. 4)
(Fig. 5)
Selection Guide
Cautions
Product
Information
Fix the guide rails with the grooves with the datum
marks on the same side.
The distance A between the mounting hole and end
face is machined with a minus tolerance and
accordingly the joint has a clearance. However, the
clearance causes no bad influences.
Tighten the bolts of the rail from one side or from the
center to the right and left in sequence.
From one side
Plastic Bearing
From center
Multi-layer Bearing
A
A
Clearance
CorrectWrong
Clearance
adjusting side
Pull bolts
Shift table
datum surface
Loosen. (Fig. 6)
Technical
Information
Slide Shifter
Air Bearings
mark side
(S Type only)
Metallic Bearing
Grooves for
the datum side
Tighten. (Fig. 8)
Corporate Profile
286
Selection Guide
Insert the shift tables in the guide rail and adjust the
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Parts No.
STE20STC20
STE28STC28
STFE28STF28
STF38
STF48
M8
T 5
M8
T 8
M820
M10
T 8
M825
M10
T12
M1030
M12
T16
Air Bearings
less)
Insert the shift tables into the guide rails with the
clearance adjusting sides ( marks) outward. Put
Slide Shifter
Corporate Profile
Technical
Information
287
Mating
plate
Datum side
Zero clearance
Driven side
Give clearance here.
0.3 to 0.5 mm
(Important)
Datum side
Driven side
Selection Guide
Installing Several Shift Tables on Dual-axis Rails Topsy-turvy, Laterally, or Vertically (S Type)
the guide rails.
Product
Information
Plastic Bearing
Mating plate
Other Instructions
It is recommended that a mating plate with high
Air Bearings
Use knock pins for both the guide rails and shift tables if
Metallic Bearing
sure that the tables move smoothly, and fix the mating
plate finally.
Recheck parallelism and clearance of the rails if
movement is not smooth.
If large moment loads are applied, the resistance
increases.
Multi-layer Bearing
Slide Shifter
Technical
Information
Corporate Profile
288
Selection Guide
Shaft
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Component PartsAccuracy
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Pilot
289
0.03 A
Unusable under the condition of water, splashing water and high humidity.
Component Parts
No.
Name
Hollow shaft
BGS/BGSP
Product
Information
housing
with pilot BTCA
Oiles Slide Shifter BA TypeAluminum
Material
Housing
Aluminum
Guide bushings
Oiles metal
Dust seal
NBR
BTCA BGS/BGSP
Shaft
Hollow shaft
Selection Guide
Parts No.
BTCA16-75
W10.2
1.6
25
4-M Screw
PA
P0.2
0
L 0.3
Exclusive BTCA guide shafts (BGS, BGSP) are available. Refer to page 307 for the detail.
Mounting hole
W1
BTCA6-50
BTCA6-75
BTCA8-50
BTCA8-75
BTCA10-50
BTCA10-75
BTCA10-100
BTCA12-50
BTCA12-75
BTCA12-100
BTCA16-50
BTCA16-75
BTCA16-100
BTCA16-125
BTCA20-75
BTCA20-100
BTCA20-125
BTCA20-150
BTCA20-200
BTCA20-250
BTCA25-75
BTCA25-100
BTCA25-150
BTCA25-200
BTCA25-250
BTCA30-75
BTCA30-100
BTCA30-150
BTCA30-200
BTCA30-250
BTCA30-300
BTCA40-100
BTCA40-150
6
6
8
8
10
10
10
12
12
12
16
16
16
16
20
20
20
20
20
20
25
25
25
25
25
30
30
30
30
30
30
40
40
50
75
50
75
50
75
100
50
75
100
50
75
100
125
75
100
125
150
200
250
75
100
150
200
250
75
100
150
200
250
300
100
150
12
12
14
14
16
16
16
20
20
20
25
25
25
25
30
30
30
30
30
30
35
35
35
35
35
42
42
42
42
42
42
52
52
20
20
22
22
25
25
25
30
30
30
35
35
35
35
45
45
45
45
45
45
50
50
50
50
50
60
60
60
60
60
60
70
70
6
8
8
10
10
12
12
12
15
15
15
15
20
20
20
20
20
30
30
30
20
20
30
35
35
20
20
30
40
40
40
30
30
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
14 M35
14 M35
15 M35
15 M35
18 M46
18 M46
18 M46
20 M46
20 M46
20 M46
25 M58
25 M58
25 M58
25 M58
30 M611
30 M611
30 M611
30 M611
30 M611
30 M611
35 M611
35 M611
35 M611
35 M611
35 M611
40 M813
40 M813
40 M813
40 M813
40 M813
40 M813
50 M1016
50 M1016
PA
25
50
25
50
20
45
70
20
45
70
25
40
65
90
40
60
85
110
160
210
40
60
110
160
210
35
50
100
150
200
250
40
90
12.5
12.5
12.5
12.5
15
15
15
15
15
15
15
17.5
17.5
17.5
17.5
20
20
20
20
20
17.5
20
20
20
20
20
25
25
25
25
25
30
30
0.980.10
0.980.10
0.980.10
0.980.10
2.4 0.24
2.4 0.24
2.4 0.24
2.4 0.24
2.4 0.24
2.4 0.24
4.9 0.50
4.9 0.50
4.9 0.50
4.9 0.50
7.8 0.80
7.8 0.80
7.8 0.80
7.8 0.80
7.8 0.80
7.8 0.80
7.8 0.80
7.8 0.80
7.8 0.80
7.8 0.80
7.8 0.80
20 2.00
20 2.00
20 2.00
20 2.00
20 2.00
20 2.00
37 3.80
37 3.80
0.0350.070
0.0350.070
0.0180.105
0.0180.105
0.0160.106
0.0160.106
0.0160.106
0.0240.119
0.0240.119
0.0240.119
0.0340.127
0.0340.127
0.0340.127
0.0340.127
0.0390.150
0.0390.150
0.0390.150
0.0390.150
0.0390.150
0.0390.150
0.0420.153
0.0420.153
0.0420.153
0.0420.153
0.0420.153
0.0450.160
0.0450.160
0.0450.160
0.0450.160
0.0450.160
0.0450.160
0.0500.165
0.0500.165
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Parts No.
Plastic Bearing
W/20.05
4-R1.5R2.5
D h8
d
W/20.03
W10.2
6.3
4-M Screw
Product
Information
Dimension Table
290
BTCA BGS/BGSP
Hollow shaft
Service Range
Static and Dynamic Allowable Load for
Parts No.
Multi-layer Bearing
Metallic Bearing
BTCA6-50
BTCA10-50
BTCA12-50
BTCA8-50
BTCA8-75
BTCA10-75
BTCA10-100
BTCA12-75
Slide Shifter
BTCA12-100
BTCA16-50
BTCA16-75
Technical
Information
BTCA16-100
Corporate Profile
Allowable static load: Allowable load when it is born in the stationary condition or
at quite low speed near stopping (not more than 0.0017 m/s [0.1 m/min.])
Allowable dynamic load: Allowable load in the condition with sliding speed of
1.0m/s [60 m/min] or less.
BTCA6-75
291
Air Bearings
Plastic Bearing
Product
Information
Selection Guide
Shaft
BTCA16-125
BTCA20-75
BTCA20-100
BTCA20-125
Parts No.
BTCA20-150
BTCA20-200
BTCA20-250
BTCA25-75
BTCA25-100
BTCA25-150
BTCA25-200
BTCA25-250
BTCA30-75
BTCA30-100
BTCA30-150
BTCA30-200
BTCA30-250
BTCA30-300
BTCA40-100
BTCA40-150
Selection Guide
Service Range
Allowable load in a correlation with Guide Shaft Length N {kgf}
Allowable load in conditon that the max. amount of deflection is 0.1mm and two tables on two shafts.
Product
Information
Shaft length
mm 100
300
400
500
7.8 0.8
3.9 0.4
600
700
800
900
1000
W:
d :
:
E:
Allowable loadNkgf
Shaft diametermm
Length (axial direction)mm
Young's modulusS45C=2.06105N/mm2
2.09104kgf/mm2
Allowable Velocity
Lubrication conditions
0.65m/s39m/min
Remarks
We have a record of 1.2m/s70m/minin
vertical sliding motion under light load.
Seal Friction Fs
BTCA8
BTCA10
BTCA12
BTCA16
1.6N0.16kgf
2.0N0.20kgf
2.5N0.25kgf
2.9N0.30kgf
BTCA20
BTCA25
BTCA30
BTCA40
3.9N0.40kgf
4.9N0.50kgf
5.9N0.60kgf
6.9N0.70kgf
Corporate Profile
BTCA6
1.2N0.12kgf
Technical
Information
Dry
Slide Shifter
Air Bearings
0.3d4E
W=
2
BTCA weight2
3
Metallic Bearing
4,710 480 4,710 480 4,710 480 4,710 480 4,620471 2,910296 1,950199 1,370 139 987 102
Calculating formula for the shaft length other than the length shown above.
Parts No.
Fs
Parts No.
Fs
Multi-layer Bearing
200
Plastic Bearing
(Unit: N[kgf])
292
Selection Guide
Shaft
Hollow shaft
BGS/BGSP
Component PartsAccuracy
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Aluminum
housing BTSA
Oiles Slide Shifter BA Type
Component Parts
No.
0
0.03 A
L 0.3
Name
Material
Housing
Aluminum
Guide Bushings
Oiles metal
Slide Shifter
Air Bearings
Unusable under the condition of water, splashing water and high humidity.
Service Range
Allowable Velocity
Lubrication conditions
Dry
0.65m/s39m/min
Allowable Load
Static and Dynamic Allowable Load for shift Tables N {kgf}
Allowable static load: Allowable load when it is born in the stationary condition or at quite low speed
near stopping (not more than 0.0017 m/s [0.1 m/min.])
Corporate Profile
Technical
Information
Allowable dynamic load: Allowable load in the condition with sliding speed of 1.0m/s60m/min
or less.
293
Parts No.
BTSA6-25
BTSA6-50
BTSA8-25
BTSA8-50
BTSA10-25
BTSA10-50
BTSA12-30
BTSA12-50
69N 7kgf
206N21kgf
69N 7kgf
275N28kgf
88N 9kgf
382N39kgf
127N13kgf
441N45kgf
147N15kgf
588N60kgf
196N20kgf
706N72kgf
235N24kgf
853N87kgf
284N29kgf
Parts No.
BTSA16-30
BTSA16-50
BTSA20-50
BTSA20-75
BTSA25-50
BTSA25-75
BTSA30-50
BTSA30-75
314N 32kgf
1,410N144kgf
471N 48kgf
1,410N144kgf
471N 48kgf
2,350N240kgf
785N 80kgf
1,764N180kgf
588N 60kgf
2,940N300kgf
981N100kgf
2,116N216kgf
705N 72kgf
3,530N360kgf 1,180N120kgf
BTSA BGS/BGSP
Shaft
Hollow shaft
Parts No.
BTSA16-30
6.3
25
4-R1.5R2.5
1.6
W10.2
4-M Screw
PA
P 0.2
PA
Multi-layer Bearing
L 0.3
Exclusive BTCA guide shafts (BGS, BGSP) are available. Refer to page 307 for the detail.
W1
Screw
M
PA
BTSA6-25
BTSA6-50
BTSA8-25
BTSA8-50
BTSA10-25
BTSA10-50
BTSA12-30
BTSA12-50
BTSA16-30
BTSA16-50
BTSA20-50
BTSA20-75
BTSA25-50
BTSA25-75
BTSA30-50
BTSA30-75
6
6
8
8
10
10
12
12
16
16
20
20
25
25
30
30
25
50
25
50
25
50
30
50
30
50
50
75
50
75
50
75
20
20
22
22
25
25
30
30
35
35
45
45
50
50
60
60
6
6
6
8
8
10
10
12
10
15
12
20
12
20
12
20
14
14
15
15
18
18
20
20
25
25
30
30
35
35
40
40
15
25
15
25
15
25
15
25
15
25
25
45
25
45
25
45
M35
M35
M35
M35
M46
M46
M46
M46
M58
M58
M611
M611
M611
M611
M813
M813
5
12.5
5
12.5
5
12.5
7.5
12.5
7.5
12.5
12.5
15
12.5
15
12.5
15
0.98
0.10
0.98
0.10
0.98
0.10
0.98
0.10
2.4
0.24
2.4
0.24
2.4
0.24
2.4
0.24
4.9
0.50
4.9
0.50
7.8
0.80
7.8
0.80
7.8
0.80
7.8
0.80
20 2.00
20 2.00
0.0350.070
0.0350.070
0.0180.105
0.0180.105
0.0160.106
0.0160.106
0.0240.119
0.0240.119
0.0340.127
0.0340.127
0.0390.150
0.0390.150
0.0420.153
0.0420.153
0.0450.160
0.0450.160
Slide Shifter
Air Bearings
Metallic Bearing
Parts No.
Plastic Bearing
W/20.03
W/2 0.05
Product
Information
Dimension Table
Selection Guide
Technical
Information
Corporate Profile
294
Selection Guide
Shaft
Hollow shaft
BGS/BGSP
Component PartsAccuracy
Component Parts
No.
7
d H
Slide Shifter
Technical
Information
Corporate Profile
295
Name
Material
FC250Oiles metal
Dust seal
NBR
Guide shaft BGS S45Chard chrome-plated
Guide shaft BGSP STKM13Ahard chrome-plated
FCD450
Shaft holder
Shaft fixing bolt
A-M6F
Grease nipple
Shift table
TH0.03
h10.02 H10.02
Datum
surface
Unit height
W0.05
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
tolerance shaft.
Service Range
Allowable Velocity
Lubrication conditions
Remarks
Dry
0.5m/s30m/min
Periodical lubrication
1.0m/s60m/min
Greasing is needed if the stroke is 1 meter or more or the allowable wear amount is small.
BTC16
BTC20
BTC25
BTC30
BTC40
BTC50
Selection Guide
My
L1
Allowable static load: Allowable load when it is born in the stationary condition
or at quite low speed near stopping (not more than 0.0017 m/s [0.1 m/min.])
Allowable dynamic load: Allowable load in the condition with sliding speed of
1.0m/s [60 m/min] or less.
Allowable load
Nkgf
Mp
BTC20
BTC25
BTC30
BTC40
BTC50
Static
2,940
300
4,120
420
5,880
600
8,830
900
14,100
1,440
17,700
1,800
Dynamic
981
100
1,370
140
1,960
200
2,940
300
4,710
480
5,880
600
1,960L2
200
L2
2,750L2
280
L2
3,920L2
400
L2
5,880L2
600
L2
9,410L2
960
L2
11,800L2
1,200
L2
1,960L1
200
L1
2,750L1
280
L1
3,920L1
400
L1
5,880L1
600
L1
9,410L1
960
L1
11,800L1
1,200
L1
Mp
Allowable moment My
Nmkgfm
Mr
If bend of the guide shaft exceeds 0.1 mm, the sliding resistance may increase for reasons of clearance. See the graphs
below and adjust the bend of the guide shaft below 0.1 mm.
BGSP
9810
1000
4900
500
4900
500
Slide Shifter
981
100
490
50
490
50
196
20
98
10
100
200
500
1000
length
mm
Calculating formula
2000
200
500
1000
2000
mm
d is inner diameter tolerance. length
3
WConcentric loadNkgf
Length
mm
2
E Young's modulus2.06105N/mm
2.09104kgf/mm2
I Geometrical moment of inertiamm4
D4
D4d4
Solid shaft
64
Hollow shaft
64
Corporate Profile
Maximum bent= W
192 E I
Technical
Information
196
20
98
10
100
D
d
1960
200
981
100
50
35
40
30 30
20
D
0
5
0
4
1960
200
9810
1000
Air Bearings
0
3
5
2
0
2
6
1
BGS
Metallic Bearing
Multi-layer Bearing
BTC16
Plastic Bearing
Parts No.
Product
Information
Mr
L2
296
BTC BH BGS/BGSP
Shift Table
Guide Shaft
Specify by
Parts No.
Specify by
Parts Drawings
BTC16
Parts No.
Hole
diameter
BH
Parts No.
BHS16
Tightening bolt holeM5
40
BGS16
BGS20
BHS20
45
20
3
2
20
48
32
24
2-5.8
Prepared hole
for dowel
5
20
BTC25
BGS20
BGS25
2-9
13
26
BTC20
2-7
30
BH20
BH25
Guide Shaft
10
22
BHS25
Shaft Holder
Shaft Holder
48
BHS25
34
26
35
22
1
10
2-7.8
Prepared hole
for dowel
32
6.3
55
24
25
6.3
Shaft Holder
20
BHS20
Shaft Holder
6.3
Datum surface
2-7
25
BH16
BH20
Guide Shaft
8
18
40
Datum surface
48
2-7
12
16
BTC20
25H7
Prepared hole
for dowel
4
40
16
26
20
36
2-4.8
16
Shift Table
Datum
surface
16
2
23
BTC16
Datum
surface
Shaft Holder
36
6.3
16H7
BHS16
Shaft Holder
18
6.5
Datum
surface
BH16
20
24
BTC25
BGS25
2-9
BH25
14
6.3
Datum surface
BH16
Guide Shaft
56
Slide Shifter
Specify by
BGS16-300
BGS16
Shift Table
Shift Table
Technical
Information
BTC16
18
Corporate Profile
No symbol: None
MS: both ends
20H7
297
Shaft Holder
BTC I.D. - MS
43
Air Bearings
Hollow shaft
6.3
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Shaft
11
25
2-9
35
BTC30
BGS30
Shift Table
30
40
BHS30
4-M10
10
Screw depth
15
65
45
25
13
BGS40
BH40
BHS40
Shaft Holder
Shaft Holder
70
80
55
12.5
35
2-9.8
32
35
2-14
30
12.5
BTC40
BHS50
60
Screw depth
12.5
18
90
65
40
3
4-M12
42
Prepared hole
for dowel
32
40
2-14
35
15
BTC50
BGS50
BH50
40
70
4-11
Corporate Profile
14
100
2-9.8
50
60
48
86
Shaft Holder
84
6.3
50H7
BHS50
Shaft Holder
Technical
Information
Datum
surface
BH50
Guide Shaft
32
6.3
Datum surface
60
BH40
BGS50
Shift Table
35
Slide Shifter
BTC50
BGS40
4-11
Air Bearings
13
85
Prepared hole
for dowel
40
53
40
Screw depth
15
Metallic Bearing
50
BHS40
4-M10
6.3
12
4-9
45
BH30
Guide Shaft
35
10
40H7
22.5
25
10
28
6.3
Datum surface
BGS30
2-11
Multi-layer Bearing
BTC40
Shift Table
28
Plastic Bearing
26
17
68
30
38
Prepared hole
for dowel
BTC30
72
2-7.8
30
55
6.3
30H7
Datum
surface
Shaft Holder
60
10
Datum
surface
BHS30
Shaft Holder
Product
Information
6.3
Datum surface
BH30
Guide Shaft
Selection Guide
Parts Drawings
298
Selection Guide
Hollow shaft
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
299
Component PartsAccuracy
Component Parts
No.
8
dH
TH0.03
Unit height
W0.05
h10.02 H10.02
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Name
Shift table
Guide bushing
Dust seal
Fixing bolt
Grease nipple
Guide shaft BGS
Guide shaft BGSP
Shaft holder
Shaft fixing bolt
Material
FC250
Oiles metal
NBR
A-PF1/8
S45Chard chrome-plated
STKM13Ahard chrome-plated
FCD450
Service Range
Allowable Velocity
Lubrication conditions
Allowable velocity
Remarks
Dry
0.5m/s30m/min
Periodical lubrication
1.0m/s60m/min
Greasing is needed if the stroke is 1 meter or more or the allowable wear amount is small.
BTF16
BTF20
BTF25
BTF30
BTF40
BTF50
Selection Guide
My
Allowable static load: Allowable load when it is born in the stationary condition
L1
or at quite low speed near stopping (not more than 0.0017 m/s [0.1 m/min.])
Allowable dynamic load: Allowable load in the condition with sliding speed of
1.0m/s [60 m/min] or less.
Allowable load
Nkgf
Mp
BTF20
BTF25
BTF30
BTF40
BTF50
Static
4,410
450
6,180
630
8,830
900
13,200
1,350
21,200
2,160
26,500
2,700
Dynamic
1,470
150
2,060
210
2,940
300
4,410
450
7,060
720
8,830
900
2,940L2
300
L2
4,120L2
420
L2
5,880L2
600
L2
8,830L2
900
L2
14,100L2
1,440
L2
17,700L2
1,800
L2
2,940L1
300
L1
4,120L1
420
L1
5,880L1
600
L1
8,830L1
900
L1
14,100L1
1,440
L1
17,700L1
1,800
L1
Mp
Allowable
My
moment
Nmkgfm Mr
If bend of the guide shaft exceeds 0.1 mm, the sliding resistance may increase for reasons of clearance. See the graphs
below and adjust the bend of the guide shaft below 0.1 mm.
BGSP
9810
1000
4900
500
4900
500
490
50
981
100
490
50
196
20
98
10
100
200
500
1000
length
mm
Calculating formula
2000
200
500
1000
2000
mm
d is inner diameter tolerance. length
3
WConcentric loadNkgf
Length
mm
2
E Young's modulus2.06105N/mm
2.09104kgf/mm2
I Geometrical moment of inertiamm4
D4
D4d4
Solid shaft
64
Hollow shaft
64
Corporate Profile
Maximum bent= W
192 E I
Technical
Information
196
20
98
10
100
1960
200
Slide Shifter
D
d
981
100
50
35
40
30 30
20
D
0
5
0
4
1960
200
9810
1000
Air Bearings
0
3
5
2
0
2
6
1
BGS
Metallic Bearing
Multi-layer Bearing
BTF16
Plastic Bearing
Parts No.
Product
Information
Mr
L2
300
BTF BH BGS/BGSP
Hollow shaft
Guide Shaft
Specify by
Shaft Holder
BTF I.D. - MS
Parts No.
Specify by
Parts No.
BTF16
Parts Drawings
BTF16
Parts No.
BH16
BH16
Guide Shaft
BHS16
Shaft Holder
Shaft Holder
60
BHS16
30
45
4-M6 Screw
7.5
30
16
3
48
10
2-4.8
40
16
Prepared hole
for dowel
4
16
16H8
16
34
BTF16
BTF20
BGS16
8
18
2-7
25
BH16
BGS20
Shift Table
2-7
12
36
Spot facing
depth 1
BH20
Guide Shaft
BHS20
Shaft Holder
Shaft Holder
70
BHS20
Tightening bolt holeM5
55
7.5
40
20
Prepared hole
for dowel
4
18
20
Slide Shifter
40
BTF20
BTF25
BGS20
10
22
2-7
30
BH20
BGS25
Shift Table
2-9
12
48
Spot facing
depth 1
2-5.8
20
44
24
12
4-M8 Screw
55
7.5
20H8
BH25
Guide Shaft
BHS25
Shaft Holder
Shaft Holder
BHS25
4-M8 Screw
45
22
15
Spot facing
depth 1
Prepared hole
for dowel
24
48
BTF25
BGS25
2-9
BH25
12
20
25H8
56
25
2-7.8
50
Corporate Profile
10
65
7.5
65
40
26
Technical
Information
80
301
Hole
diameter
BH
BGS16-300
BGS16
Shift Table
20
Multi-layer Bearing
Metallic Bearing
Specify by
No symbol: None
MS: both ends
35
Air Bearings
Plastic Bearing
Product
Information
Selection Guide
Shaft
11
25
2-9
35
BTF30
BGS30
Shift Table
BH30
Guide Shaft
BHS30
Shaft Holder
Shaft Holder
95
75
70
4-M10
50
10
Screw
25
2
10
BHS30
Prepared hole
for dowel
Spot facing
depth 1
56
28
2-11
14
10
24
30H8
22.5
4-9
25
10
BTF30
BGS40
Shift Table
45
BH30
BH40
Guide Shaft
BHS40
Shaft Holder
Shaft Holder
120
Screw
12.5
35
2-9.8
Spot facing
depth 1
Prepared hole
for dowel
85
40
75
10
35
70
BTF40
BH50
Guide Shaft
BHS50
Shaft Holder
Shaft Holder
4-M12
Screw
12.5
75
40
25
Spot facing
depth 1
10
34
40
84
BTF50
BGS50
2-14
BH50
35
15
40
70
4-11
Corporate Profile
50H8
Prepared hole
for dowel
100
50
90
48
2-9.8
Technical
Information
110
12.5
BHS50
Tightening bolt holeM10
100
28
6.3
135
67.5
4-11
60
BH40
BGS50
Shift Table
30
12.5
35
Slide Shifter
BTF50
BGS40
2-14
Air Bearings
28
40H8
25
40
22
95
90
65
Metallic Bearing
12.5
4-M12
60
BHS40
Multi-layer Bearing
BTF40
BGS30
Plastic Bearing
70
30
60
32
18
2-7.8
Product
Information
47.5
Selection Guide
Parts Drawings
302
BH
Parts No.
BH16
Parts Drawings
BH16Shaft holder
2-9 Drill
14 Spot facing
depth 2
38
10
20
8
40
16
20
64
BH25Shaft holder
BH30Shaft holder
42
36
Tightening bolt
25
Tightening
bolt holeM6
6.3
37.5
41
M6
30
2-11 Drill
18 Spot facing
depth 2
67
38
16
55
24
11
62
75
BH50Shaft holder
65
58
Tightening
bolt
40
Tightening
bolt holeM8
6.3
55
M10
70
50
2-14 Drill
20 Spot facing
depth 2
2-14 Drill
20 Spot facing
depth 2
82
52
45
84
110
22
22
Corporate Profile
303
13
Tightening
bolt holeM10
Tightening
bolt
97
6.3
28
84
BH40Shaft holder
M8
Tightening
bolt holeM6
Tightening bolt
54
2-9 Drill
14 Spot facing
depth 2
15
10
Tightening
bolt holeM5
48
54
Air Bearings
Slide Shifter
20
depth 2
M6
Technical
Information
Tightening bolt
46
2-7 Drill
11 Spot facing
16
30
M5
24
Tightening bolt
Tightening
bolt holeM5
6.3
32
23
6.3
Multi-layer Bearing
BH20Shaft holder
27
M5
Metallic Bearing
Hole
diameter
6.3
Plastic Bearing
Product
Information
Specify by
30
Selection Guide
BH
35
15
100
130
40
BHS
Selection Guide
BHS
Hole
diameter
Product
Information
Parts No.
BHS16
16
Tightening bolt
25
28
10
18
25
BHS25Shaft holder
BHS30Shaft holder
Tightening bolt
22
Tightening
bolt holeM6
2-7.8
Prepared hole
for dowel
M6
30
35
18
36
15
11
25
35
BHS40Shaft holder
Tightening bolt
35
Tightening
bolt holeM8
M10
50
60
Tightening
bolt holeM10
2-9.8
Prepared hole
for dowel
25
22
70
60
40
12.5
30
35
60
75
105
135
35
15
40
70
Corporate Profile
65
90
115
Tightening bolt
4-11 Drill
18 Spot facing
depth 1
98
4-11 Drill
18 Spot facing
depth 1
BHS50Shaft holder
Technical
Information
2-9.8
Prepared hole
for dowel
22.5
10
25
45
115
45
45
65
85
Slide Shifter
40
55
75
M8
40
2-7.8
Prepared hole
for dowel
42
61
4-9 Drill
14 Spot facing
depth 1
Tightening
bolt holeM6
25
Tightening bolt
Air Bearings
2-9 Drill
14 Spot facing
depth 1
22
30
72
30
10
Metallic Bearing
35
50
65
25
40
55
M6
25
2-5.8
Prepared hole
for dowel
53
45
2-7 Drill
11 Spot facing
depth 1
Tightening
bolt holeM5
20
Tightening bolt
Multi-layer Bearing
2-7 Drill
11 Spot facing
depth 1
M5
20
32
20
12
M5
16
BHS20Shaft holder
Tightening
bolt holeM5
2-4.8
Prepared hole
for dowel
Plastic Bearing
Parts Drawings
BHS16Shaft holder
304
Selection Guide
Product
Information
Specify by
BTC I.D. - MS
BTF
Parts No.
(e.g.) When BC type is used and 16-mm I.D. metal scraper is used
BTC16-MS
Multi-layer Bearing
Plastic Bearing
No symbol: None
MS: both ends
Oiles metal
Details of portion a
Metallic Bearing
L1
Body
L2
Oiles metal
with metal scraper
assembled
Air Bearings
Slide Shifter
Specify by
MS I.D.
Corporate Profile
Technical
Information
Applicable
shaft dia. (d)
305
16
20
25
30
40
50
Specify by
Parts No.
22
28
33
40
50
62
4.4
4.9
4.9
3.9
5.3
5.3
DS I.D.
Parts No.
Parts No.
DS16
DS20
DS25
DS30
DS40
DS50
Press-fit hole tolerance, BC type: D Js7 BF type: D H8, applicable shaft diameter tolerance should be de7 to h7.
Length L2
3
5
5
6
6
7
Product
Information
Datum surface
mark
Grease nipple
M6
M8
M8
M10
M10
M12
BTF16
BTF20
BTF25
BTF30
BTF40
BTF50
M5
M6
M6
M8
M6
M8
M8
M10
M10
M12
M10
M12
Corporate Profile
Remove the clamp bolt, insert a steep plate in the slit, and tighten the
bolt from the opposite side. The slit widens and the shaft becomes
free. Be careful not to widen the slit excessively.
Steel plate, 1 to 2 mm
Technical
Information
Slide Shifter
Air Bearings
Datum side
Driven side
Tighten finally. Mating base (2) Tighten temporarily.
Metallic Bearing
Multi-layer Bearing
BTC16
BTC20
BTC25
BTC30
BTC40
BTC50
Fixing bolt
Left drawing Right drawing
Plastic Bearing
Datum side
Mating base (1) Driven side
Tighten finally.
Tighten temporarily.
Selection Guide
306
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
307
BGS/BGSP
Guide shafts applicable to the Oiles
Slide Shifters BTCA, BTSA, BTC, and
BTF and Guide Units BK and BT.
Product
Information
Selection Guide
Variation
Parts No.
BGS
BGSP
Type
Shaft diameter
Maximum length Applications
Material
812
1,000mm
S45Chard chrome-plated (Plating thickness 15 or more)
Solid
1650
General
2,900mm
Hollow shaft 3050 STKM13Chard chrome-plated (Plating thickness 15 or more)
Selection Guide
BGS/BGSP
Parts No.
BGS30-1000
Product
Information
Dimension Table
I.D.
D Tolerance
300
20
30
35
0.12
0.18
0.26
0.47
0.73
1.1
1.7
0.9
8
10
12
16
20
25
30
30
35
40
40
50
50
0.013
0.035
0.013
0.035
0.016
0.043
0.025
0.050
0.030
0.060
0.030
0.060
0.035
0.065
0.035
0.065
0.040
0.070
0.035
0.065
0.035
0.065
0.040
0.075
0.040
0.075
500
600
800
0.20
0.31
0.44
0.63
1.0
1.5
2.2
1.2
3.9
1.8
6.1
3.2
1.5
2.3
3.3
1.8
4.5
5.9
2.6
9.2
4.8
4.4
2.4
0.39
0.61
0.88
1.6
2.5
3.8
5.5
3.0
7.5
9.8
4.3
15.3
7.8
1,200
1,500
11.8
5.3
23.0
12.0
Slide Shifter
The values shown above in Standard length column are weight (kg).
Contact us for other length of shaft.
1.2
1.9
2.8
1.5
1,000
Air Bearings
O.D.
Metallic Bearing
BGS8
BGS10
BGS12
BGS16
BGS20
BGS25
BGS30
BGS30P
BGS35
BGS40
BGS40P
BGS50
BGS50P
Multi-layer Bearing
Parts No.
Plastic Bearing
BGSP
BGS
Technical
Information
Corporate Profile
308
Product identification methods differ with machining type. Refer to each product identification code entry methods.
Machining Areas
1: Single end
2: Both ends
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
Md
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
Keyway machining
BGS D - L - 2 -KY- W H 1 2
KY
Keyway machining
B G S D - L - 2 - KY- W H
Parts No. Length
(Shaft dia.)
W h7
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
2
1
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
(Shaft dia.)
Cutout
B G S D - L - 2 - K K - H W
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
D
L
KK
Cutout
BGS D - L - 2 - KK - H W
Parts No. Length
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
(Shaft dia.)
W
L
Corporate Profile
d1
d2
KK
Shape Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
Technical
Information
(Shaft dia.)
BS
nm
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
W h7
KY
RM
309
90
(Shaft dia.)
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
VR
(Shaft dia.)
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
(Shaft dia.)
ES
Air Bearings
h7
(Shaft dia.)
Stepped threading
BGS D - L - 2 - DS - Md 1 2
DS
Step machining
B G S D - L - 2 - D N - d
d h7
DN
Slide Shifter
Md
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
BGS
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
B G S D - L - 2 - DSS - Md 1 2
Parts No. Length
Drilling
B G S D - L - 2 - KM - H
H
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
90
Standard dimensions of DSS and ESS (wrench receptacle machining) (Unit: mm)
Shaft dia. D 8 10 12 16 20 25 30 35 40 50
8
7
5
a
b
c
8
8
5
10 10 10 10 15 15 20 20
10 14 17 22 27 32 36 41
5 5 5 5 5 5 10 10
40
50
500
50
400
10
M16
600
Example 4: Single end: counter boring
BGS20-500-1-BS-20
20
14
500
20
15 h7
40
50
Corporate Profile
50
30
27
30
* Also specify the thread pitch as shown above when fine thread is specified.
Example 3: Single end: wrench receptacle machining + single end: keyway machining
BGS50-400-3-SK-3050-KY-151040
16h7
15
30
10h7
12h7
25
250
M10
M12
25
BGS30-600-3-DS-M103050-DSS-M164050
Technical
Information
M81(ne thread)
12
15
Example 2: Single end: stepped threading + single end: stepped threading with wrench receptacle
Slide Shifter
Example 1: Single end: end face threading + single end: stepped threading
BGS25-250-3-ES-M8P1.012-DS-M121525
Air Bearings
Metallic Bearing
(Shaft dia.)
Md
KM
Multi-layer Bearing
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
(Shaft dia.)
c a
Md
dh7
BGS D - L - 2 -ESS - Md
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
(Shaft dia.)
d1
d2
h
ESS
L
Plastic Bearing
DSS
Shape
Step
1: Single end, 2: Both ends, 3: Different shapes on both ends
(Shaft dia.)
(Shaft dia.)
Product
Information
SK
SK
Selection Guide
310
BTU
1.6
13H7 (dowel)
Slide Shifter
Technical
Information
Corporate Profile
Component Parts
No.
Name
Qty
1
Guide bushing
4
Dust seal
4
Stopper
1
Material
FC250
Oiles metal
NBR
S45C quenched
1.6
1.6
Air Bearings
2-13H7 (dowel)
311
Keyway
Keyway width 13
0.05
0
Component PartsAccuracy
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Accuracy
(Unit: mm)
Items
Accuracy
Running parallelism of side B with respect to side A 0.05 or less/m (upright)
Running parallelism of side D with respect to side C 0.05 or less/m (upright)
0
Tolerance of H dimension
0.1
Datum surface for height direction is side A .
Datum surface for axial direction is side C and dowel hole or
Selection Guide
Service Range
Allowable Load, Allowable Moment
Product
Information
N {kgf} / Nm {kgm}
My
Mr
2.9N/mm2[30kgf/cm2].
Mp
BTU20
5,880
180
2,160
549
3,680
190
932
190
1,370
600 19 19 18 375
220140 95 56
BTU25
8,820
330
4,020
1,320
6,570
330
1,860
330
2,650
900 34 34 34 670
410270 190 135
BTU30
1,570
13,700
670
5,490
2,060
8,380
700
2,750
700
3,820
1,400 72 72 68 855
590390 280 210 160
BTU40
2,990
3,820
23,500 1,470
1,180 16,800 11,700 8,430
4,850
1,470
6,330
2,400 150 150 120 1,7101,190 860 645 495 390 305
0.5m/s30m/min
Air Bearings
Allowable velocity
Metallic Bearing
Allowable Velocity
Lubrication conditions
Multi-layer Bearing
Plastic Bearing
1.0m/s60m/min
Seal Friction Fs
BTU20
9.8N1.0kgf
BTU25
11.8N1.2kgf
BTU30
11.8N1.2kgf
BTU40
14.7N1.5kgf
Slide Shifter
Parts No.
Fs
Technical
Information
Corporate Profile
312
BTU
Shaft diameter - Stroke
Dimension Table
BTU20 Applicable cylinder: Tube I.D. of 40
46
31
20
75
125
Stroke207
30
30
30
11
17
77
45
190
20
70
39
44
14
4-M10
180
120
160
35
55
Parts No.
BTU20-50
BTU20-100
BTU20-150
BTU20-200
BTU20-250
Stroke S
50
100
150
200
250
Parts No.
BTU25-50
BTU25-100
BTU25-150
BTU25-200
BTU25-250
Stroke S
50
100
150
200
250
20
37.5
25
53
95
60
100
150
Stroke235
40
30
38
62
14
20
190
80
42.5
51
M1675
4-M10
21-Rc1/8
220
M161.5
200
150
Plastic Bearing
22
4-M10
30
Technical
Information
4-M8
M141.5 21-Rc1/8
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
BTU20-200-AC
4-M10
Corporate Profile
Parts No.
M1675
313
Made-to-order products
25
Selection Guide
Product
Information
BTU
Selection Guide
Dimension Table
BTU30 Applicable cylinder: Tube I.D. of 63
30
25
90
49
60
41
30
140
200
40
30
44
Stroke285
72
Stroke S
50
100
150
200
250
300
Parts No.
BTU40-50
BTU40-100
BTU40-150
BTU40-200
BTU40-250
BTU40-300
BTU40-350
Stroke S
50
100
150
200
250
300
350
Metallic Bearing
Parts No.
BTU30-50
BTU30-100
BTU30-150
BTU30-200
BTU30-250
BTU30-300
25
51
75
40
250
Stroke340
130
50
30
50
85
18
26
30
170
Technical
Information
4-M12
310
200
83
Slide Shifter
270
30
110
59
67
4-M16
300
M1675
40
21-Rc1/8
Air Bearings
4-M12
M221.5
Multi-layer Bearing
4-M12
14
20
102
65
270
190
57
30
Plastic Bearing
240
20
4-M12
260
M1675
4-M10
21-Rc1/8
Product
Information
M181.5
Corporate Profile
314
Selection Guide
Product
Information
Corporate Profile
Technical
Information
Guide Units
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Feature
315
Highly durable guide units with Oiles 500SP bearings in the sliding surfaces
exclusively designed for reciprocating motion.
Highly rigid guide units for improved strength.
Available in various inner diameters, length, etc.
Service Range
Allowable Load, Allowable Moment
Static and Dynamic Allowable Load for Guide Units N {kgf}
Allowable Moment for two Guide Units on two Shafts N.m {kgf.m}
Mo
Allowable static load: Allowable load when it is born in the stationary condition or at
quite low speed near stopping (not more than 0.0017 m/s [0.1 m/min.])
Allowable dynamic load: Allowable load in the condition with sliding speed of 1.0m/s60m/minor less.
Parts No.
Upright
Cases
Mo
Parts No.
Upright
Cases
Mo
BBFK20-60
Static 21,6102,200
Static 6,180 630
2 axes 2 sets 14715 BBFK35-120
2 axes 2 sets
Dynamic 2,060 210
Dynamic 7,200 735
BBFK20-100
BBFK20-150
BBFK25-80
Static 11,0001,125
Static 28,2002,880
2 axes 2 sets 29430 BBFK40-120
2 axes 2 sets 1,130115
Dynamic 3,680 375
Dynamic 9,410 960
BBFK25-120
Static 13,2001,350
Static 28,2002,880
2 axes 2 sets 53054 BBFK40-180
2 axes 2 sets 1,700173
Dynamic 4,410 450
Dynamic 9,410 960
BBFK25-180
Static 13,2001,350
Static 28,2002,880
2 axes 2 sets 79481 BBFK40-270
2 axes 2 sets 2,540259
Dynamic 4,410 450
Dynamic 9,410 960
BBFK30-100
Static 15,9001,620
Static 35,3003,600
2 axes 2 sets 53054 BBFK50-120
2 axes 2 sets 1,410144
Dynamic 5,300 540
Dynamic 11,8001,200
BBFK30-150
Static 15,9001,620
Static 44,1004,500
2 axes 2 sets 79481 BBFK50-180
2 axes 2 sets 2,650270
Dynamic 5,300 540
Dynamic 14,7001,500
BBFK30-250
Static 15,9001,620
Static 44,1004,500
2 axes 2 sets 1,320135 BBFK50-270
2 axes 2 sets 3,970405
Dynamic 5,300 540
Dynamic 14,7001,500
686 70
Selection Guide
Service Range
Allowable Velocity
Allowable max velocity
Remarks
Dry
0.5m/s30m/min
Periodical lubrication
1.0m/s60m/min
Greasing is needed if the stroke is 1 meter or more or the allowable wear amount is small.
Product
Information
Lubrication conditions
BBFK20
BBFK25
BBFK30
BBFK35
BBFK40
BBFK50
Fs
Ms
330mm
W=588N
{60kgf}
Stroke
200mm
Stroke: 200mm
Sliding distance: 400km
BBFK30-150
BGS30-400
Air Bearings
Result
Metallic Bearing
Multi-layer Bearing
Test data
Plastic Bearing
Parts No.
Guide Units
Technical
Information
Corporate Profile
316
BBFK BGS/BGSP
Hollow shaft
BBFK 30 - 150
Parts No.
L/2
Product
Information
4-M Screw
D1
1.6
0.03
1.6
6.3
d
Dg6
4 Drill
E
0
L 0.3
Multi-layer Bearing
Plastic Bearing
6.3
Metallic Bearing
Air Bearings
Guide Units
Technical
Information
Corporate Profile
Rp1/8 Screw
6.3
Parts name
Material
Sleeve
FC250
Guide bushing
Oiles metal
(Note 1)
Dust seal
NBR+SPCC
Parts No.
317
F
Dg6
Selection Guide
Shaft
BBFK20-60
BBFK20-100
BBFK20-150
BBFK25-80
BBFK25-120
BBFK25-180
BBFK30-100
BBFK30-150
BBFK30-250
BBFK35-120
BBFK35-180
BBFK35-270
BBFK40-120
BBFK40-180
BBFK40-270
BBFK50-120
BBFK50-180
BBFK50-270
I.D.
d Tolerance
20
20
20
25
25
25
30
30
30
35
35
35
40
40
40
50
50
50
0.035
0.014
0.035
0.014
0.035
0.014
0.035
0.014
0.035
0.014
0.035
0.014
0.036
0.015
0.036
0.015
0.036
0.015
0.040
0.015
0.040
0.015
0.040
0.015
0.040
0.015
0.040
0.015
0.040
0.015
0.046
0.021
0.046
0.021
0.046
0.021
O.D.
F
80
80
80
100
100
100
120
120
120
130
130
130
140
140
140
160
160
160
D Tolerance
44
44
44
54
54
54
65
65
65
75
75
75
80
80
80
95
95
95
0.009
0.025
0.009
0.025
0.009
0.025
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.012
0.034
0.012
0.034
0.012
0.034
Sleeve
60
100
150
80
120
180
100
150
250
120
180
270
120
180
270
120
180
270
50
50
50
65
65
65
80
80
80
85
85
85
90
90
90
100
100
100
D1 Tolerance
41
41
41
51
51
51
61
61
61
70
70
70
75
75
75
89
89
89
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Mounting Weight
hole kg
M
35
25
25
25
30
30
30
30
30
35
35
35
40
40
40
40
50
50
12
12
12
15
15
15
18
18
18
20
20
20
20
20
20
25
25
25
15
15
15
20
20
20
25
25
25
25
25
25
30
30
30
30
30
30
30 55 M10 0.6
30 55 M10 0.8
30 55 M10 1.0
40 65 M10 1.3
40 65 M10 1.6
40 65 M10 2.1
50 75 M12 2.2
50 75 M12 2.6
50 75 M12 4.0
54 85 M12 3.2
54 85 M12 4.1
54 85 M12 6.0
60 90 M16 3.7
60 90 M16 4.8
60 90 M16 6.3
70 100 M16 4.8
70 100 M16 5.8
70 100 M16 7.3
Selection Guide
Oiles metal
with metal scraper
assembled
d1
D2
D1
L1
T0.05
Metallic Bearing
BBFK 20 - 100 - MS - SW
Parts No.
Stopper (optional)
Air Bearings
No symbol: None
SW: Both ends
SF: Flange end only
SS: Sleeve end only
Specify by
Parts No.
T
7
9
10
12
13
15
ST 20
Parts No.
M
2-M4
2-M5
2-M6
2-M6
2-M8
2-M8
Applicable guide
BBFK20
BBFK25
BBFK30
BBFK35
BBFK40
BBFK50
Press-fit hole tolerance should be D Js7 and applicable shaft diameter tolerance should be de7 to h7, if the metal scraper is used alone.
For the dust seal (DS), see page 305.
Corporate Profile
L1
4.9
4.9
3.9
4.9
5.3
5.3
Stopper (ST)
Parts No. d1 D1 D2
25 43.5 35
ST20
30 53.5 42
ST25
36 64.5 52
ST30
41 74.5 59
ST35
46 79.5 65
ST40
56 94.5 78
ST50
Specify by
Technical
Information
MS 20
Stopper
Example: When I.D.
is 20 mm
Guide Units
Multi-layer Bearing
Dust seal
Metal scraper
Stopper
Plastic Bearing
Stopper (ST)
Nominal diameter d
Product
Information
318
Selection Guide
with Pilot
Plastic Bearing
Product
Information
Feature
Pilots may be used for positioning, highly durable guide units with Oiles 500SP
bearings in the sliding surfaces exclusively designed for reciprocating motion.
Highly rigid guide units for improved strength.
Available in various inner diameters, length, etc.
Corporate Profile
Technical
Information
Guide Units
Air Bearings
Metallic Bearing
Multi-layer Bearing
Service Range
319
Allowable Moment for two Guide Units on two Shafts N.m {kgf.m}
Mo
Allowable static load: Allowable load when it is born in the stationary condition
or at quite low speed near stopping (not more than 0.0017 m/s [0.1 m/min.])
Allowable dynamic load: Allowable load in the condition with sliding speed of 1.0m/s60m/minor less.
Parts No.
Upright
Cases
Mo
Parts No.
Upright
Cases
Mo
BBT20-60
14715 BBT40-120
Static 28,2002,880
2 axes 2 sets 1,130115
Dynamic 9,410 960
BBT20-100
29430 BBT40-180
Static 28,2002,880
2 axes 2 sets 1,700173
Dynamic 9,410 960
BBT20-150
44145 BBT40-270
Static 28,2002,880
2 axes 2 sets 2,540259
Dynamic 9,410 960
BBT25-80
Static 11,0001,125
2 axes 2 sets
Dynamic 3,680 375
29430 BBT50-120
Static 35,3003,600
2 axes 2 sets 1,410144
Dynamic 11,8001,200
BBT25-120
Static 13,2001,350
2 axes 2 sets
Dynamic 4,410 450
53054 BBT50-180
Static 44,1004,500
2 axes 2 sets 2,650270
Dynamic 14,7001,500
BBT25-180
Static 13,2001,350
2 axes 2 sets
Dynamic 4,410 450
79481 BBT50-270
Static 44,1004,500
2 axes 2 sets 3,970405
Dynamic 14,7001,500
BBT30-100
Static 15,9001,620
2 axes 2 sets
Dynamic 5,300 540
53054
BBT30-150
Static 15,9001,620
2 axes 2 sets
Dynamic 5,300 540
79481
BBT30-250
Static 15,9001,620
2 axes 2 sets 1,320135
Dynamic 5,300 540
Selection Guide
Service Range
Allowable Velocity
Allowable max velocity
Remarks
Dry
0.5m/s30m/min
Periodical lubrication
1.0m/s60m/min
Greasing is needed if the stroke is 1 meter or more or the allowable wear amount is small.
Parts No.
BBT16
BBT20
BBT25
BBT30
BBT40
BBT50
Fs
Ms
Plastic Bearing
Product
Information
Lubrication conditions
Multi-layer Bearing
Metallic Bearing
The
A
Parts No.
B
Attach bolt size
A
M8
M10
M8
M10
M10
M12
M12
M16
M12
M16
Guide Units
BBT20
BBT25
BBT30
BBT40
BBT50
Air Bearings
Technical
Information
Corporate Profile
320
BBT BGS/BGSP
Hollow shaft
BBT 30 - 150
Parts No.
1.6
4 Drill
0.03
6.3
1.6
6.3
D1
F
Dg6
B
Use
0
1 0.3
L 0.30
Parts name
Material
Sleeve
FC250
Metallic Bearing
Air Bearings
Guide Units
Technical
Information
Corporate Profile
Rp1/8 Screw
6.3
bushing (Note 1)
Oiles metal
Dust seal
NBR+SPCC
Guide
Parts No.
321
Multi-layer Bearing
Plastic Bearing
L/2
4-M Screw
d
Dg6
Specify by
Product
Information
Selection Guide
Shaft
BBT20-60
BBT20-100
BBT20-150
BBT25-80
BBT25-120
BBT25-180
BBT30-100
BBT30-150
BBT30-250
BBT40-120
BBT40-180
BBT40-270
BBT50-120
BBT50-180
BBT50-270
I.D.
d Tolerance
20
20
20
25
25
25
30
30
30
40
40
40
50
50
50
0.035
0.014
0.035
0.014
0.035
0.014
0.035
0.014
0.035
0.014
0.035
0.014
0.036
0.015
0.036
0.015
0.036
0.015
0.040
0.015
0.040
0.015
0.040
0.015
0.046
0.021
0.046
0.021
0.046
0.021
O.D.
F
80
80
80
100
100
100
120
120
120
140
140
140
160
160
160
D Tolerance
44
44
44
54
54
54
65
65
65
80
80
80
95
95
95
0.009
0.025
0.009
0.025
0.009
0.025
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
0.010
0.029
Sleeve
60
100
150
80
120
180
100
150
250
120
180
270
0.012
0.034 120
0.012
0.034 180
0.012
0.034 270
W
50
50
50
65
65
65
80
80
80
90
90
90
100
100
100
D1 Tolerance
41
41
41
51
51
51
61
61
61
75
75
75
89
89
89
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
T 1
35
25
25
25
30
30
30
30
30
40
40
40
40
50
50
8
8
8
11
11
11
13
13
13
15
15
15
20
20
20
15
15
15
20
20
20
25
25
25
30
30
30
30
30
30
30 55 M10 0.5
30 50 M10 0.7
30 50 M10 0.9
40 65 M10 1.0
40 65 M10 1.3
40 65 M10 1.9
50 75 M12 1.9
50 75 M12 2.3
50 75 M12 3.7
60 90 M16 3.4
60 90 M16 4.4
60 90 M16 6.0
70 100 M16 4.5
70 100 M16 5.5
70 100 M16 7.0
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
Mounting Weight
hole kg
M
Selection Guide
Oiles metal
with metal scraper
assembled
d1
D2
D1
L1
T0.05
Metallic Bearing
BBT 20 - 100 - MS - SW
Parts No.
Stopper (optional)
Air Bearings
No symbol: None
SW: Both ends
SF: Flange end only
SS: Sleeve end only
Specify by
Parts No.
Stopper (ST)
1
D1 D2
d
Parts No.
25 43.5 35
ST20
30 53.5 42
ST25
36 64.5 52
ST30
46 79.5 65
ST40
56 94.5 78
ST50
T
7
9
10
13
15
ST 20
Parts No.
M
2-M4
2-M5
2-M6
2-M8
2-M8
Applicable guide
BBT20
BBT25
BBT30
BBT40
BBT50
Press-fit hole tolerance should be D Js7 and applicable shaft diameter tolerance should be de7 to h7, if the metal scraper is used alone.
Corporate Profile
L1
4.9
4.9
3.9
5.3
5.3
Specify by
Technical
Information
MS 20
Stopper
Example: When I.D.
is 20 mm
Guide Units
Multi-layer Bearing
Dust seal
Metal scraper
Stopper
Plastic Bearing
Stopper (ST)
Nominal diameter d
Product
Information
322
Selection Guide
Product
Information
BA Type
Testing conditions
Result
Testing conditions
Result
STF28
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
GR28-1200
W=2,940N
300kgf
W=196N
20kgf
Stroke 500mm
BF Type
Testing conditions
Testing conditions
Result
Result
Type: BTC30 four shift tables
Wear amount on bushing: 0.032mm
BGS30-1000 dual-axis
on shaft: 0.006mm
Load: 735N {75kgf}
Coefficient of friction: 0.120.30
Moment: 323Nm {33kgfm}
Velocity: 0.25m/s {15m/min}
Stroke: 500mm
Sliding distance: 300km (300000 cycles)
BGS40-800
W=735N
75kgf
BH40
BTF40
BTC30
Air Bearings
Slide Shifter
Technical
Information
BTCA25-150
BC Type
W=2,940N
{300kgf}
Stroke 460mm
Stroke 500mm
800mm
BH30
Corporate Profile
BGS25-800
1,200mm
BGS30-1000
323
Stroke 600mm
BTU Type
Result
Wear amount on bushing: 0.023mm
Type: BTU30-500
on shaft: 0.012mm
Load: 2,940N {300kgf}
Coefficient
of
friction:
0.160.20
Velocity: 0.42m/s {25m/min}
Stroke: 460mm
Sliding distance: 730 (800000 cycles)
Testing conditions
BTU30-500
Stroke 460mm
W=2,940N300kgf
To Prevent Malfunctioning
If the point of the drive source is apart from the shift tables
P
Product
Information
Top
Plastic Bearing
2
1
Bottom
If the shift table installation position is apart or the point of the drive source is apart
F2
F1
Metallic Bearing
Multi-layer Bearing
If the position of drive source P is apart from the rail surface by 2, of 2/1 exceeds 1.67 when the coefficient of friction is 0.3, resulting in malfunctioning.
Take the allowable moment load into consideration and reduce 2/1 below 1.5.
n
2
P2
If the 2/1 ratio of dual-axis parallel rails is large, the couple of the drive source P and resistance F1 and F2 becomes large and the slide shifter works
improperly. Reduce 2/1 below 3. As the point of the drive source becomes apart from the center, the condition becomes worse. Synchronize the drive
source with P1 and P2 if 2/1 is inevitably larger than 3 for reasons of the structure.
Slide Shifter
Shim
Select the B type if the parallelism t exceeds 0.3. Insert shims under the
shaft holders to adjust them.
After adjustment, check the parallelism with a level, straight edge,
clearance gauge, etc.
Corporate Profile
Shim
Technical
Information
Level
Air Bearings
P1
324
each table first using the formula shown below, and select a proper
table in the allowable load table of each series. Then, calculate the
driving force from the found load using the formula shown below.
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
L0
L2
L1
Metallic Bearing
D L3
L1
A=W/4W/2L 2 /L 0W/2L 3 /L 1
A=W/4W/2L 0 /L 1
B=W/4W/2L 0 /L 1
B=W/4W/2L 2 /L 0W/2L 3 /L 1
C=W/4W/2L 0 /L 1
C=W/4W/2L 2 /L 0W/2L 3 /L 1
D=W/4W/2L 0 /L 1
D=W/4W/2L 2 /L 0W/2L 3 /L 1
Driving force = F, safety ratio = S (standard value: 1.5 to 2.5)
F = (1A2B3C4DnFs)
The obtained value is a practical driving force. This formula applies to the case where the driving force position is at the table center.
L1
dual-axis tables
L0 E
Application form
Air Bearings
F
D
E
AH
F
L2 W
G
L3
L1
C
G
Slide Shifter
Technical
Information
Corporate Profile
L3 W
L2
L0
325
B Type
A=B=C=D=W/2L 2 /L 0
E=F=G=H=W/2L 3 /L 1
S Type
A=B=C=D=W/2L 2 /L 0
E=G=WL 3 /L 1
F=H=O
S Type
A=B=C=D=W/2L 3 /L 1
E=W/2WL 2 /L 0
L 2 L 0 / 2
G=W/2+WL 2 /L 0
F=H=O
Driving force = F, safety ratio = S (standard value: 1.5 to 2.5)
L 0 / 2 L 2
F = (1A2B3C4DnFs (nMs) 1E2F3G4H)
F=W/2+WL 2 /L 0
Add the (*nMs) value when the metal scraper is used.
G=H=O
The obtained value is a practical driving force. W (weight) is added to the value of the lengthwise vertical L 0 / 2L 2
G=F=H=O
tables. This formula applies to the case where the driving force position is at the table center.
B Type
A=B=C=D=W/2L 3 /L 1
E=H=W/4W/2L 2 /L 0
F=G=W/4W/2L 2 /L 0
Type
Installation condition
Coefficient of friction
Erecting
S Type
Lateral
Hanging
0.15
0.17
0.30
Others
0.15
CAUTION
1
Wa
fc
N=aK
2 Wi/n fwfvfef
fw = load factor
K = coefficient of friction
The coefficient of friction is set according to their
performances and using conditions.
Other series
5106
None
1.0
Yes
2.0 to 3.0
fv = velocity factor
This factor is used for compensation of the speed
conditions.
(Unit: m/sec.)
S = stroke [m]
fe = environmental factor
Air Bearings
Metallic Bearing
Multi-layer Bearing
Series
Coefficient of friction K
Plastic Bearing
Product
Information
Wi = load [N {kgf}]
load) at the load applied to each table calculated with the
load calculating formula.
Contact factor fc
1.0
Three
Four
Corporate Profile
Technical
Information
fc = contact factor
Two
One
fl = lubrication factor
n = number of tables
Number of
tables per axis
Ambient temperature
60C or less
60 to 100C
Foreign matter None
Yes
None
Yes
Environmental factor fe 1.0 to 2.0 3.0 to 6.0 3.0 to 6.0 6.0 to 12.0
Slide Shifter
326
Selection Guide
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
327
a=0.1mm
K=510
S=0.25m
f=1.0, no lubrication
A=W/4W/2L2/L0W/2L3/L1
B=W/4W/2L2/L0W/2L3/L1
C=W/4W/2L2/L0W/2L3/L1
D=W/4W/2L2/L0W/2L3/L1
L0
B
Use the load calculating formula shown above and find the load
to be applied to each table from the use conditions.
W = load = 100 kgf
L0L1L2L3 = distance between load application point and each
table
Find A, B, C and D (load to be applied to each table) from L0 = L1
= L2 = L3 = 200 mm.
A=100/4100/2200/200100/2200/200=25
B=100/4100/2200/200100/2200/200=75
C=100/4100/2200/200100/2200/200=25
D=100/4100/2200/200100/2200/200=125
Select the proper shift tables so that the values of A, B, C and D
are within the ranges of values in the allowable load table shown
in the description.
A = 25 kg (erecting)
B = -75 kg (hanging) See the hanging values for negative values.
C = 25 kg (erecting)
D = 125 kg (erecting)
A
D
L3
C
L2
L1
Load type
Allowable static load
Allowable dynamic load
Allowable static load
Allowable dynamic load
Allowable static load
Allowable dynamic load
Allowable static load
Allowable dynamic load
(Unit: N {kgf})
3,430350
Installation condition
Lateral
17,700 1,800
4,410450
3,920400
5,880600
1,470150
1,270130
31,400 3,200
7,850800
7,360750
10,800 1,100
2,650270
2,450250
44,100 4,500
13,700 1,400
11,800 1,200
14,700 1,500
4,410450
3,920400
Erecting
10,800 1,100
Hanging
Allowable static load: Allowable load when it is born in the stationary condition or at quite low speed near stopping (not more than 0.0017 m/s [0.1 m/min.])
Allowable dynamic load: Allowable load in the condition with sliding speed of 1.0 m/s [60 m/min] or less.
Do not use the STC20 in the lateral or hanging condition.
F=1A2B3C4DnFsnMs
Erecting
S Type
Lateral
Hanging
0.15
0.17
0.30
1/2S
Wa/Wi
fc/fwfvfef
N = aK
Find the service life from the use conditions using the above formula.
Air Bearings
Slide Shifter
Technical
Information
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
F = driving force
S = safety factor (2 in this example)
1, 2, 3, 4 = coefficient of friction of each table
1 = 0.15 (erecting)
2 = 0.30 (hanging)
3 = 0.15 (erecting)
4 = 0.15 (erecting)
A, B, C and D = load applied to each table
A = 25 kgf
B = -75 kgf
C = 25 kgf
D = 125 kgf
n = number of tables = 4
Fs = seal friction = 1.2 kgf
The value of F is obtained as shown below:
F = (0.15 25 0.3 75 0.15 25 0.15 125 4 1.2) 2 107 kgf
Product
Information
Find the driving force from the use conditions using the above
formula.
Type
Installation condition
Coefficient of friction
Corporate Profile
328
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
A=B=C=D=W/2L2/L0
E=F=G=H=W/2L3/L1
L1
Use the load calculating formula shown above and find the load
to be applied to each table from the use conditions.
W = load = 300 kgf
L0, L1, L2 and L3 = distance between load application point and
each table
L0 = 250mm, L1 = 200mm, L2 = 250mm, L3 = 300mm
Find load applied to each table from above conditions.
A = B = C = D = 300/2 250/250 = 150kgf
E = F = G = H = 300/2 300/200 = 225kgf
H
E
D
L2
A
F
L3
L0
Slide Shifter
Air Bearings
Parts No.
BTF16
Corporate Profile
Technical
Information
BTF20
329
BTF25
BTF30
BTF40
BTF50
Load type
Allowable static load
Allowable dynamic load
Allowable static load
Allowable dynamic load
Allowable static load
Allowable dynamic load
Allowable static load
Allowable dynamic load
Allowable static load
Allowable dynamic load
Allowable static load
Allowable dynamic load
(Unit: N {kgf})
Installation condition
4,410450
1,470150
6,180630
2,060210
8,830900
2,940300
13,200 1,350
4,410450
21,200 2,160
7,060720
condition or at quite low speed near stopping (not more than 0.0017
m/s [0.1 m/min.])
26,500 2,700
8,830900
F=1A2B3C4DnFsnMs1E2F
3G4H
SW
Type
Coefficient of friction
Selection Guide
1/2S
Wa/Wi
fc/fwfvfef
N=aK
Find the service life from the use conditions using the above formula.
Air Bearings
Slide Shifter
Metallic Bearing
Multi-layer Bearing
Rising F1 = 764kgf
Falling F2 = 164kgf
Plastic Bearing
F = driving force
S = safety factor (2 in this example)
1, 2, 3, 4 = coefficient of friction of each table
1 = 2 = 3 = 4 = 0.15
A, B, C, D, E, F, G, and H = load applied to each table
A = B =C =D = 150kgf
E = F = G = H = 225kgf
n = number of tables = 4
Fs = seal friction = 0.30kgf
Ms = metal scraper friction = 1.5kgf
F = (0.151500.151500.151500.1515040.3041.50.152250.152250.152250.15225) 2 464
(300) kgf
Product
Information
Find the driving force from the use conditions using the above formula.
Technical
Information
Corporate Profile
330
331
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Technical Information
Foundation of Tribology
Selection and Design of Oiles Bearings
Cooling fit and Press Fitting
Press fitting Procedure
Service Life of Oiles Bearings and Clearance
Fitting Standard Table
Corrosion Resistance of Base Resin and Base Metal used for Oiles Bearings
Unit Conversion Table
Storage Instructions
P.333
P.335
P.341
P.342
P.343
P.344
P.357
P.359
P.360
332
Selection Guide
Product
Information
On Design
There is no specific method for sellection and designing of self-lubricating bearings which is a very important element in any
machinary. However, selection of highly credible bearing is possible if fundamental requirements for bearing design are studied
based on design process.
Here, fundamentals of tribology and fundamentals of design items will be discussed in order to improve bearing design.
Foundation of Tribology
Contact of two solid surfaces
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
333
No matter how smooth the surface may appear, there are roughness and
winding on the surface of the solid body. When two surfaces come into
contact, they are actually the contacts between the rough projections of the
two surfaces. Therefore, of the total area of the two surfaces the area that is
actually in contact with each other is limited. As such even if the load is very
small, there is strong pressure on the actual points of the contacts.
These very limited minute areas of the contacts take charge of friction
between the two solid bodies, surface damage and interaction of two solid
surfaces. As the load increases, projected areas of the contact surfaces go
through plastic deformation and consequently the area that bears the load
is expanded. As the hardness increases, the area is decreased.
These points that actually contact and support the load are called "Real
Contact Points." The total sum of the contact points is called "Real Contact
Area." The contact supporting area that is determined by geometric
appearance is called "Apparent Contact Area."
Fig.1 shows a model of the contact.
Plastic
deformation
Load W
Elastic deformation
Fig.1 Real contacts of two solid surfaces
Lubrication Mechanism
When lubrication film exists between two relatively moving surfaces,
friction conditions of two contact surfaces can be classified in three steps
as below:
1. Hydrodynamic lubrication
2. Boundary lubrication
3. Solid lubrication
Hydrodynamic Lubrication
Lubrication film between the two contact surfaces is thick enough and two
contact surfaces are separated completely by viscous oil film. At this
moment, frictional force of two contact surfaces is determined by viscous
resistance of lubricant and it can take a very small value (coefficient of
friction ; 1 103 to 5 104). In hydrodyanmic lubrication, when shaft
is rotated, the oil around the shaft also rotates due to the viscoity of the
lubricant oil and generates oil pressure at the loaded area. This
phenomenon is called wedge effect.
Oil pressure P generated within lubricating oil film is affected by change of
temperature and viscosity of lubricating oil, surface roughness and
clearance "h" and the rotational speed of the shaft "v." Fig.2 shows the
model of hydrodynamic lubrication.
Lubricant oil
V
Load W
Wedge
effect
Technical Information
Selection Guide
Product
Information
Boundary Lubrication
Load W
Sliding direction
Oxide layer
Metal
Metal
Metal to metal
contact area
Metallic Bearing
Air Bearings
Slide Shifter
Sliding direction
A
Adhesive
area
B
Technical
Information
J
Junction
A
B
Free wear particle
Fig.4 Mode of producing wear particles
by adhesive friction
Corporate Profile
Multi-layer Bearing
Plastic Bearing
Lubricating oil film between the two contact surfaces is extremely thin and
no viscous hydrodynamic oil film exists between the two. As shown in the
Fig.3, only film of absorbed oil molecules exists. Absorptive oil film is
arranged oil molecules that are adhered onto the solid surfaces and its
shear resistance is greater than hydrodynamic oil film. Frictional force in
this area, compared to hydrodyanamic lubrication, is greater (coefficient of
friction ; 5 102 to 5 101). In the frictional contact points such as
real contact points, oil film is frequently broken. The lubrication condition
that generates a frictional condition such as this is called "Boundary
Lubrication." In order to decrease the friction under this condition,
selection of self-lubricating bearing may be desirable.
334
Product
Information
Selection Guide
On Design
Multi-layer Bearing
Plastic Bearing
Metallic Bearing
Confirm and verify material, strength, rigidity, accuracy of housing and the mating shaft. Confirm and verify bearing
accuracy, clearance, oil grooves and oil holes. Study restictons on bearing material manufacturing.
Study possibility of standard products.
Air Bearings
YES
NO
Slide Shifter
P / V / PV value
P
Allowable PV value
Corporate Profile
Technical
Information
335
Pmax.
Allowable max.PV value
P V value : Product of the contact pressure P and the velocity V. This is the most
important value in selecting bearing.
These values are not independent allowable values but are interrelated design values. When
designing, values should fall under the range as shown in this graph.
P
Service range
Allowable max. PV value allowable max. contact pressure P max. allowable max. velocity V max.
Each value should be obtained based on the formula listed on the next page.
Vmax.
Technical Information
Bushing
2
2
P N/mmkgf/cm
Radial journal
oneway rotation
W
P=
dL
102 W
dL
Case:1
I.D. 20mm, length 10mm at
1000N journal load.
1000 =5N/mm2
2010
Oscillation W
W
P=
dL
Case:2
I.D. 20mm, rotating speed
120rpm.
202 =0.126m/s
103
102 W
dL
V=
d c
103
W
P=
dL
102 W
dL
c s1
V=
2cS
103
Rotation
V m/sec
m/mim
Rotation
Oscillation
Load W N {kgf}
I.D. dmm
O.D.Dmm
2
2
P N/mmkgf/cm
Reciprocation
P=
W
BL
10 W
, B L
Load WN {kgf}
Length L mm
Width B mm
V m/sec
m/mim
2cS
103
Load WN {kgf}
Cycle speed c s1 {cpm}
Oscillating angle rad { }
Length L mm
I.D. dmm
Load WN {kgf}
Cycle speed c s1 {cpm}
Stroke distance S mm
I.D. dmm
Length L mm
PV N/mm2m/skgf/cm2m/mim
4 W D n
PV= 3
10
D2d2,
400 W D n
103
D2d2
Oscillation
V=
2cS
, 10
3
cs1
Cycle speed
{cpm}
Stroke distance Smm
4 W D c
PV= 3
10
D2d2
,
400 W D c
180103
D2d2
Load W N {kgf}
Rotating speed n s1 {rpm}
Cycle speed c s1 {cpm}
Oscillating angle rad { }
I.D. dmm
O.D. Dmm
PV N/mm2m/skgf/cm2m/mim
2WcS
103BL
Load
Cycle speed
Stroke distance
Length
Width
WN {kgf}
c s1 {cpm}
Smm
L mm
Bmm
PV=
WcS
, 5 B L
Corporate Profile
D c
V=
103 ,
D c
180103
Technical
Information
Plate
Oscillation
4W
P=
D2d2,
400W
D2d2
Slide Shifter
d
D
Rotation
D n
V=
103
D n
103
4W
P=
D2d2,
400W
D2d2
2010002 =0.63N/mm2m/s
10320100
Air Bearings
Thrust motion
Case:3
I.D. 20mm, length 10mm, rotating
speed 120rpm, 1000N journal load.
2cS
2WcS
WcS
PV=
, 10
10 d L
, 5 d L
L
2
2
P N/mmkgf/cm
Load WN {kgf}
Rotating speed n s1 {rpm}
Length L mm
I.D. dmm
Washer
Metallic Bearing
Load WN {kgf}
I.D. dmm
Length L mm
W n
, 10 L
d c
W d c
W d c
PV=
, 180 10 10 d
L , 18 10 d L
L
Reciprocation
W n
103L
Multi-layer Bearing
Load WN {kgf}
I.D. dmm
Length L mm
d n
PV=
, 10
Plastic Bearing
d n
V=
103
Product
Information
Load WN {kgf}
I.D. dmm
Length L mm
PV N/mm2m/skgf/cm2m/mim
V m/s
m/mim
Selection Guide
Calculation of P / V / PV value
336
Plate
Mode of motion
Shaft rotation
Bearing rotation
Shaft oscillation
Bearing oscillation
Reciprocation 1
Reciprocation 2
Minute oscillation
Washer
Reciprocation 1
Mode of motion
Bushing
Mode of motion
Reciprocation 2
Minute oscillation
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
Bearing rotation
Shaft oscillation
Bearing oscillation
Minute oscillation
Coecient of load
Coecient of load
Coecient of load
Values in the chart are to be used only as a guide when allowable PV value of bushing at shaft rotational motion is 1.
337
Shaft rotation
PV
value should be set at low level as decline of the frictional characteristics and difficulty in frictional heat diffusion may be anticipated.
Decline in the hardness of the bearing material should be taken into
account.
Clearance decrease caused by the dimensional change of the bearing
and the mating shaft due to heat expansion should be considered.
In order to prevent sliding at the outer diameter and falling off of the
bearing, lock screw or detent screw should be implemented taking press
fitting interference decrease caused by stress relaxation of the bearing
into account.
Allowable PV value
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
On Design
Room temp.
Technical Information
1 sec. operation
and 6 sec. interval
1 sec. operation
and 12 sec. interval
24.5
19.6
9.8
4.9
0
0 30 60 90 120150180210
Cyclecpm.
Contact pressure
N/mm2 {kgf/cm2}
HB150 or over
24.5{250} to 49.0{500}
HB250 or over
49.0{500} to 98.0{1,000}
HRC50 or over
HB120 or over
Up to 49.0{500}
Ra(Ry)
Less than
1.6a
6,3s
Less than
0.8a
3.2s
HRC45 or over
For the plastic bearing OILS 480, use mating material of more than HRC 45 hardness.
Although contamination by foreign particles do not affect the performance of self-lubricating bearings compared to the
ball bearings, it may deteriorate performance of the bearing. Following measures are recommended:
Surface
At
the both ends of the bearing, install dust seal and fill with grease.
Periodic
greasing prevents contamination of foreign particle and helps discharging of the foreign matters.
Corporate Profile
hardening treatment such as induction hardening, as well as carburizing should be implemented onto the
mating shaft.
Technical
Information
Slide Shifter
Plastic
and
Multi-layer
Bearings
Surface roughness
Air Bearings
Bearings
Hardness
Up to 24.5{250}
Metallic
Material
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
14.7
Bearing
Product
Information
In the operation of the bearing, there are continuos and intermittent operations.
In general, an intermittent operation with some intervals creates favorable
condition for the better results because suspension of operation cools
down the temperature of the friction surface.
However, this frequent start and stop increases wear by inadequate
lubrication. It causes galling or seizure at the time of start. A
self-lubricating bearing supplies lubricating oil or forms solid lubrication
film onto the frictional surface and prevents drop in the bearing performance even in such an inadequate lubrication operation.
The diagram shows influence of intermittent motion and continious motion
on PV characteristic in the radial journal rotational motion and oscillating
motion of Oiles 500SP. Self-lubricating bearing has higher limit PV value
as the stopping interval is increased.
Selection Guide
338
Selection Guide
On Design
Selection and Design of Oiles Bearings
Bearing configuration
Technical
Information
In general, length of the bearings is calculated by the ratio of the bearing length (L)
and I.D. (D) of the bearing. (L/D)
For geneal use : L/D= 0.5 to 2.0. For high load, high velocity, uneven contact :
L/D=0.8 to 1.0.
L / D : Small
L / D : Large
Small
Large
Heat radiation
Large
Small
High
Low
Vibration damping
Small
Large
Space saving
Large
Small
Large
Discharge of particles
Influence of the bearing length described here is reference.
10
20
50
300
100
3 to 4 3 to 5 7.5 to 10 10 to 15 20 to 30
Plastic bearingmolded)
Multi-layer bearing
Composite bearingHiplast
1 to 2 1 to 3
1
1.5
3 to 5
2 to 2.5
I.D. d
Wall thickness t
Wall thicknes of the bearings can be made thinner to realize smaller design.
5 to 1020 to 30
2.5
Unit : mm
Chamfering
Both ends of bearings are chamfered to avoid stress concentration.
Bearing ID d
Up to 80
C0.5
80 to 200
C1.0
200 to 300
C1.5
Over 300
C2.0
I.D.
Chamfer
I.D.
Chamfer
Unit : mm
O.D.
Chamfer
Corporate Profile
Small
Wall thickness
Sliding surface
339
D (I.D.)
I.D. d
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Length
1
lC
5
O.D.
Chamfer
Technical Information
Selection Guide
Product
Information
Reduction
Lubricating oil : industrial lubricating oil ISO VG22 to 46 [kinematic viscosity 22 to 46 s+ / 40]
Grease : Litheum based multi-purpose grease (with consistency of NLG 2 to 0)
If operating temperature goes beyond 150, the grease which uses polyurea or bentonite as a thickner could be specified.
Multi-layer Bearing
Oil hole
Oil groove
Metallic Bearing
Plastic Bearing
Circumferential groove
Number of groove
30 or less
1.5
1.5
1.2
1 to 2
30 to 50
2.0
2.0
1.8
3.0
3.0
2.5
3.5
3.5
3.5
120 to 180
4.0
4.0
5.0
180 to 250
5.0
5.0
6.0
250 to 315
6.0
6.0
7.0
315 to 400
7.0
7.0
8.0
400 to 500
8.0
8.0
8.0
Slide Shifter
50 to 80
80 to 120
Air Bearings
Bearing I.D.
Unit : mm
Technical
Information
Corporate Profile
340
Selection Guide
Product
Information
Plastic Bearing
On Design
Cooling Fit and Press Fitting
Cooling fit
There are two methods to set Oiles bearings into a housing. One is called
press-fitting. For press fitting, a mandrel and a press machine are used.
The other is called cooling fit. The cooling fit uses liquid nitrogen or dry ice.
Compared to press-fitting, cooling fit is efficient and achieves more
accurate installation.
Avoid shrink fitting as it may deteriorate bearing function.
Air Bearings
Metallic Bearing
Multi-layer Bearing
Container
Corporate Profile
Technical
Information
Slide Shifter
3. Operation procedure
341
1. As a cooling agent, use liquid nitrogen or dry ice. The standard cooling
temperature is 40 to 70 .
2. Cooling time should be more than one hour. Cooling time needs to be
longer if the interference is larger, depending on applicable fitting
tolerance. In addition to the cooling fit, press fitting should be used if
cooling time needs to be shortened.
3. Measure and confirm outer diameter of the bushing and inner diameter of the housing before cooling. If any defect is found during fitting,
it may develop into a major trouble.
4. Bushing should be inserted into the housing soon after taking it out
from the cooling agent in a chamber. If stopped during fitting, dimension of the busing goes back to its original size and it is extremely
difficult to withdraw the bushing from the housing and do the fitting
again.
5. Apply lubricant onto the sliding surface.
Note : Warm housing up to 20 to 30 if sufficient temperature gap
could not be maintained as in winter.
Technical Information
Selection Guide
Press fitting
Load
Bushing
Housing
Stress distribution of
cylindrical combination
F = PDL
of inner diameter change d of
bushing after press fit
PD 2
SD
d= 2Ebtb = 2Ebtb
KbKh
tb
Bushing
n
Poisson's ratio
Young's moduluskgf/mm2
Material
Poisson's ratio
Air Bearings
1Vb1Vb
12tb/D2
Eb4tb/D
1tb/D
1Vh1Vh
Dh/D2
Kh=
2
Eh
Dh/D 1
S
1
P =
D KbKh
Kb=
Metallic Bearing
Amount
Housing
Dh
Multi-layer Bearing
When a bushing is press fitted into a housing with some interference, the
bushing I.D. becomes smaller than the original size. Amount of this inner
diameter change depends on the dimension of the housing, the bushing
(thickness and shape), and the material.Testing by dimension and by material
is required in order to determine precise change. However, it is not feasible to
conduct tests for all the combinations of materials and dimensions. Therefore
amount of inner diameter change is determined based on the below formula.
Press
Chamfer
Plastic Bearing
Mandrel
Product
Information
Usually, Oiles bearings are press-fitted into the housing. For this procedure, a mandrel and a press machine are used.
In case of a metallic bearing with large press fitting interference, chamfer
outer diameter of the bearing and inner diameter of the housing. Then use
a mandrel to facilitate easier press fitting.
Young's moduluskgf/mm2
21,000
CAC703
0.32
12,000
0.30
16,500 to 18,000
CAC304
0.35
11,000
Cermet M
0.12
5,000
500B
0.25
6,600
Cermet G
0.05
2,400
500SP
0.35
7,700
FC 250
0.30
11,000 to 13,000
500AB
0.32
8,400
SCM 440
0.30
21,000
2000
0.30
21,000
SUS 304
0.28
19,700
300
0.25
6,000
SUS 420J2
0.31
20,400
250-07
0.17
700
CAC403 (BC3)
0.25
10,500
Fiberflon
0.20
1,800 to 3,000
CAC406 (BC6)
0.25
9,450
80
0.35
288
Technical
Information
0.30
Slide Shifter
SS400
0.15
0.15
Corporate Profile
342
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
On Design
Service Life of Oiles Bearings and Clearance
Service life of Oiles bearings
Service life of Oiles bearings depends on application atmosphere and other
relevant conditions. Below formula is determined from the relationship
between the load and the sliding distance and should be regarded as rough
standard for designing. Please inquire an Oiles representative for details.
mm/(N/mm2m/sHr)
mm/(kgf/cm2m/minHr)
Dry
6104 to 3103
5106 to 1
6105
3104
5107 to 1
6106 to 3105
5108 to 1
Periodic lubrication
Oil lubrication
to
Technical
Information
Corporate Profile
Clearance design
Clearance for Oiles bearings should be designed larger than those for
regular plain bearings used under hydrodynamic lubrication. This is
because frictional heat and thickness of solid lubricant film generated in
solid lubrication conditions is larger compared to hydrodyanamic lubrication. Clearance should be corrected for the bearings where swelling is
expected such as underwater applications, chemical submersion and in
high temperature applications.
343
C a u tio n
For plastic bearings, please inquire an Oiles representative for the details
1.12105/
20 to 300
Ni-Cr steel
1.29105/
20 to 300
SUS304
1.78105/
20 to 300
SUS431
1.21105/
20 to 300
SUS316
1.62105/
20 to 300
Technical Information
Selection Guide
Exceeding 10 & up to 18
Exceeding 10 & up to 18
Exceeding 18 & up to 24
Exceeding 18 & up to 24
Exceeding 24 & up to 30
Exceeding 24 & up to 30
Exceeding 30 & up to 40
Exceeding 30 & up to 40
Exceeding 40 & up to 50
Exceeding 40 & up to 50
Exceeding 50 & up to 65
Exceeding 50 & up to 65
Exceeding 65 & up to 80
Exceeding 24 & up to 30
Exceeding 30 & up to 40
Exceeding 40 & up to 50
Exceeding 50 & up to 65
()
()
max.
min.
()
()
()
()
max.
min.
Unit : mm
larger than the those indicated in the Fitting Standard Tablemay be required. For details, please inquire an Oiles representative.
Oiles Glitron F
Dimension tolerance
I.D.
Up to 10
Exceeding 10 & up to 18
Exceeding 30 & up to 50
Dimension tolerance
Clearance
max.
min.
()
()
()
Interference
max.
min.
Up to 10
Exceeding 10 & up to 18
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Smaller clearance, smaller by approximately 1/1000d, may be achieved if oil lubrication is used.
Technical
Information
Exceeding 50 & up to 80
Slide Shifter
Exceeding 18 & up to 30
O.D.
I.D.
Recommended
I.D.
press fit
shaft (h7) before press fit after
(ref.value)
()
()
()
()
()
()
Air Bearings
Bearing dimension
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
()
Exceeding 18 & up to 24
()
Interference
O.D.
Exceeding 10 & up to 18
()
Up to 10
Up to 10
()
Clearance
Product
Information
I.D.
Dimension tolerance
I.D.
Recommended
I.D.
press fit
shaft (h7) before press fit after
(ref.value)
Bearing dimension
Unit : mm
Corporate Profile
344
Oiles 250
Dimension tolerance
Up to 10
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Air Bearings
Multi-layer Bearing
Exceeding 50 & up to 80
Metallic Bearing
Plastic Bearing
Product
Information
I.D.
Slide Shifter
Technical
Information
()
()
()
()
max.
min.
Recommended
Bearing O.D.
hole (H7)
()
()
()
()
Interference
O.D.
()
Up to 10
Exceeding 10 & up to 18
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
max.
min.
Unit : mm
Swelling characteristics
When designing for fitting for underwater use bearings (Oiles 425 and 470), dimensional change by swelling must be
taken into account. In case of bushings, clearance may be changed due to swelling. Add swelling correction value
described below to inner diameter tolerance indicated in the fitting standard table.
correction value
Material
425-030607
425-1317
Room temperature
2t0.015
2t0.006
50 or over
2t0.030
2t0.012
Example : Oiles 470-02 bushing of 100 I.D. 120 O.D. 100R applied in 30 water
Based on above swelling correction value,
1000.260
0.188correction value0.160
210 (tbushing wall thickness)0.0080.160
Corporate Profile
()
Clearance
Swelling
345
Dimension tolerance
I.D.
Recommended
I.D.
after press fit
shaft (h7) before press fit (ref.value)
Bearing dimension
155185R100
Atmosphere : room temperature and in
puried water
Amount of dimensional
change of inner and
outer diameter(%)
Selection Guide
On Design
1.0
0.5
0
0
250
500
750
Number of days submerged in water (Day)
1000.420
0.348
Technical Information
Dimension tolerance
I.D.
Exceeding 10 & up to 18
Exceeding 30 & up to 50
Exceeding 50 & up to 80
()
()
()
max.
min.
()
()
()
()
Interference
O.D.
()
max.
min.
Up to 10
Exceeding 10 & up to 18
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Unit : mm
correction value
Material
470-02
470-02W
Room temperature
2t0.008
2t0.012
50 or over
2t0.012
2t0.025
Air Bearings
Swelling
Metallic Bearing
Multi-layer Bearing
()
Recommended
Bearing O.D.
hole (H7)
Plastic Bearing
Exceeding 18 & up to 30
()
Clearance
Product
Information
Up to 10
Dimension tolerance
I.D.
Recommended
I.D.
after press fit
shaft (h7) before press fit (ref.value)
Bearing dimension
Selection Guide
Oiles 470-02
Slide Shifter
Technical
Information
Corporate Profile
346
Selection Guide
On Design
2
2
Oiles 500
Room temp./contact pressure P=9.8N/mm100kgf/cm
or less
Oiles Cermet G
Room temp. to 100
C or less
Dimension tolerance
Product
Information
I.D.
Up to 10
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding120 & up to 180
Exceeding180 & up to 250
Exceeding250 & up to 315
Exceeding315 & up to 400
Dimension tolerance
I.D.
Recommended
I.D.
after press fit
shaft (h7) before press fit (ref.value)
Bearing dimension
O.D.
()
()
()
()
()
()
Clearance
max.
min.
Slide Shifter
max.
min.
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Unit : mm
Above chart can be used for low speed conditions of under 0.008 m/s {0.5 m/min}, even if contact pressure is over 9.8 N./mm2
Above chart can be applied to BCB Oiles 500 B standard product. However it does not correspond to the fitting standard
of other 500SP standard products such as SPB, SPBL, SPF, SPFG, SGF, SGB.
Oiles Cermet M
Room temp. to 100 or less
I.D.
Up to 3
Exceeding 3 & up to 6
Technical
Information
()
Up to 10
Dimension tolerance
Corporate Profile
()
Exceeding 10 & up to 18
Dimension tolerance
I.D.
Recommended
I.D.
after press fit
shaft (h7) before press fit (ref.value)
Bearing dimension
347
()
Interference
O.D.
()
()
()
()
()
()
Clearance
max.
min.
()
()
()
Interference
max.
min.
Up to 3
Exceeding 3 & up to 6
Exceeding 3 & up to 6
Exceeding 6 & up to 10
Exceeding 6 & up to 10
Exceeding 10 & up to 18
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 6 & up to 10
Exceeding 10 & up to 18
Exceeding 18 & up to 30
For fitting design with temperature over 100, please inquire an OILES representative.
Unit : mm
Technical Information
Dimension tolerance
Up to 10
Exceeding 10 & up to 18
Exceeding 30 & up to 50
Exceeding 50 & up to 80
()
()
()
()
max.
min.
()
()
()
()
max.
min.
Up to 10
Exceeding 10 & up to 18
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Unit : mm
Air Bearings
If applied over 100 conditions, clearance should be designed by adding below heat expansion
amount to the inner diameter tolerance at room temperature.
Heat expansion amount heat expansion co-efficient of shaft () shaft diameter (d) (ambience temperature room temperature)
of soft steel : 1.12 105/
If applied above 100 conditions, interference of the outer diameter may be reduced due to stress relaxation.
Detent screwing is recommended.
For fitting design with temperature over 200, please inquire an OILES representative.
Metallic Bearing
()
Interference
Multi-layer Bearing
()
Plastic Bearing
Exceeding 18 & up to 30
O.D.
Clearance
Product
Information
I.D.
Dimension tolerance
I.D.
Recommended
I.D.
after press fit
shaft(h7)
before press fit (ref.value)
Bearing dimension
Selection Guide
2
2
Oiles 500Over room temp. and up to 200
/ or contact pressure P=9.8N/mm100kgf/cm
or over
Oiles Cermet G
Over 100
C and up to 200
Slide Shifter
Technical
Information
Corporate Profile
348
Selection Guide
On Design
Oiles 500 for Gate Applications (Shaft tolerance h7)
Dimension tolerance
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
I.D.
Exceeding 10 & up to 18
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding120 & up to 180
Exceeding180 & up to 250
Exceeding250 & up to 315
Exceeding315 & up to 400
Slide Shifter
Technical
Information
()
()
max.
min.
()
()
()
()
max.
min.
Unit : mm
This tolerance table follows Technical Standard on Dam & Weir Equipment (of Japan)
Oiles 500 Large Diameter BushingsRoom temp. / pressure P = less than 9.8N/mm2 {100kgf/cm2 }
Dimension tolerance
Bearing dimension
Dimension tolerance
Recommended
I.D.
I.D.
shaft(h7)
before press fit after press fit
()
()
()
max.
min.
()
()
()
()
Interference
()
()
O.D.
()
Clearance
Corporate Profile
()
Interference
()
Exceeding 10 & up to 18
()
O.D.
Up to 10
()
Clearance
Up to 10
I.D.
349
Dimension tolerance
I.D.
Recommended
I.D.
after press fit
shaft(h7)
before press fit (ref.value)
Bearing dimension
max.
min.
Unit : mm
Technical Information
Dimension tolerance
I.D.
Dimension tolerance
I.D.
Recommended
I.D.
after press fit
shaft(h7)
before press fit (ref.value)
Bearing dimension
()
()
max.
min.
()
()
()
()
max.
min.
Unit : mm
Dimension tolerance
Bearing dimension
I.D.
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 50 & up to 80
Exceeding 80 & up to 120
()
()
()
max.
min.
()
()
()
()
Interference
O.D.
()
max.
min.
Up to 10
Exceeding 10 & up to 18
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Unit : mm
Corporate Profile
Technical
Information
()
Slide Shifter
Exceeding 30 & up to 50
()
Clearance
Air Bearings
Up to 10
Dimension tolerance
I.D.
Recommended
I.D.
after press fit
shaft(h7)
before press fit (ref.value)
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
()
()
Interference
O.D.
()
()
Clearance
Selection Guide
Oiles 500 Large Diameter BushingsOver room temp. and up to 200 / or pressure P = over 9.8N/mm2 {100kgf/cm2 }
350
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
351
Bearing dimension
(D1)
D1
SD2
Recommended
I.D.
shaft (h7) tolerance (D1)
I.D.
S.D.
O.D.
()
Exceeding 10
& up to 14
Exceeding 14
& up to 18
Exceeding 18
& up to 24
Exceeding 24
& up to 30
Exceeding 30
& up to 40
Exceeding 40
& up to 50
Exceeding 50
& up to 65
Exceeding 65
& up to 80
Exceeding 80
& up to 100
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 120 & up to 180
Exceeding 120 & up to 180
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
()
0.018
0.018
0.018
0.018
0.021
0.021
0.021
0.021
0.025
0.025
0.025
0.025
0.030
0.030
0.030
0.030
0.035
0.035
()
0.057
0.057
0.057
0.057
0.080
0.080
0.080
0.080
0.113
0.113
0.113
0.113
0.152
0.152
0.152
0.152
0.195
0.195
()
0.030
0.030
0.030
0.030
0.047
0.047
0.047
0.047
0.074
0.074
0.074
0.074
0.106
0.106
0.106
0.106
0.141
0.141
D3
Window type spherical bearing with nominal dimension of less than 100
Product
Information
Selection Guide
On Design
min.
0.030
0.030
0.030
0.030
0.047
0.047
0.047
0.047
0.074
0.074
0.074
0.074
0.106
0.106
0.106
0.106
0.141
0.141
Outer race
I.D. (H7)
() ()
0.018 0
0.021 0
0.021 0
0.025 0
0.021 0
0.025 0
0.025 0
0.030 0
0.025 0
0.030 0
0.030 0
0.035 0
0.030 0
0.035 0
0.035 0
0.040 0
0.035 0
0.040 0
Inner race
O.D. (e7)
()
0.032
0.040
0.040
0.050
0.040
0.050
0.050
0.060
0.050
0.060
0.060
0.072
0.060
0.072
0.072
0.085
0.072
0.085
()
0.050
0.061
0.061
0.075
0.061
0.075
0.075
0.090
0.075
0.090
0.090
0.107
0.090
0.107
0.107
0.125
0.107
0.125
Clearance
max.
0.068
0.082
0.082
0.100
0.082
0.100
0.100
0.120
0.100
0.120
0.120
0.142
0.120
0.142
0.142
0.165
0.142
0.165
min.
0.032
0.040
0.040
0.050
0.040
0.050
0.050
0.060
0.050
0.060
0.060
0.072
0.060
0.072
0.072
0.085
0.072
0.085
0.0105
0.0125
0.0105
0.0125
0.0125
0.0150
0.0125
0.0150
0.0125
0.0150
0.0150
0.0175
0.0150
0.0175
0.0175
0.0200
0.0200
0.0200
max.
0.011
0.013
0.011
0.013
0.013
0.015
0.013
0.015
0.013
0.015
0.015
0.018
0.015
0.018
0.018
0.020
0.020
0.020
min.
0.032
0.038
0.032
0.038
0.038
0.045
0.038
0.045
0.038
0.045
0.045
0.053
0.045
0.053
0.053
0.060
0.060
0.060
Unit : mm
Window type spherical bearing with nominal dimension of less than 100
S.D.
O.D.
Exceeding 10
& up to 14
Exceeding 14
& up to 18
Exceeding 18
& up to 24
Exceeding 24
& up to 30
Exceeding 30
& up to 40
Exceeding 40
& up to 50
Exceeding 50
& up to 65
Exceeding 65
& up to 80
Exceeding 80
& up to 100
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 120 & up to 180
Exceeding 120 & up to 180
Recommended
I.D.
shaft (h7) tolerance (D1)
()
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
()
0.018
0.018
0.018
0.018
0.021
0.021
0.021
0.021
0.025
0.025
0.025
0.025
0.030
0.030
0.030
0.030
0.035
0.035
()
0.092
0.092
0.092
0.092
0.133
0.133
0.133
0.133
0.189
0.189
0.189
0.189
0.266
0.266
0.266
0.266
0.354
0.354
()
0.065
0.065
0.065
0.065
0.100
0.100
0.100
0.100
0.150
0.150
0.150
0.150
0.220
0.220
0.220
0.220
0.300
0.300
min.
0.065
0.065
0.065
0.065
0.100
0.100
0.100
0.100
0.150
0.150
0.150
0.150
0.220
0.220
0.220
0.220
0.300
0.300
Outer race
I.D. (H7)
() ()
0.018 0
0.021 0
0.021 0
0.025 0
0.021 0
0.025 0
0.025 0
0.030 0
0.025 0
0.030 0
0.030 0
0.035 0
0.030 0
0.035 0
0.035 0
0.040 0
0.035 0
0.040 0
Inner race
O.D. (e7)
Clearance
()
() max. min.
0.032
0.040
0.040
0.050
0.040
0.050
0.050
0.060
0.050
0.060
0.060
0.072
0.060
0.072
0.072
0.085
0.072
0.085
0.068
0.082
0.082
0.100
0.082
0.100
0.100
0.120
0.100
0.120
0.120
0.142
0.120
0.142
0.142
0.165
0.142
0.165
0.050
0.061
0.061
0.075
0.061
0.075
0.075
0.090
0.075
0.090
0.090
0.107
0.090
0.107
0.107
0.125
0.107
0.125
0.032
0.040
0.040
0.050
0.040
0.050
0.050
0.060
0.050
0.060
0.060
0.072
0.060
0.072
0.072
0.085
0.072
0.085
()
0.021
0.025
0.021
0.025
0.025
0.030
0.025
0.030
0.025
0.030
0.030
0.035
0.030
0.035
0.035
0.040
0.040
0.040
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.0105
0.0125
0.0105
0.0125
0.0125
0.0150
0.0125
0.0150
0.0125
0.0150
0.0150
0.0175
0.0150
0.0175
0.0175
0.0200
0.0200
0.0200
max. min.
0.011
0.013
0.011
0.013
0.013
0.015
0.013
0.015
0.013
0.015
0.015
0.018
0.015
0.018
0.018
0.020
0.020
0.020
0.032
0.038
0.032
0.038
0.038
0.045
0.038
0.045
0.038
0.045
0.045
0.053
0.045
0.053
0.053
0.060
0.060
0.060
Unit : mm
Technical Information
Selection Guide
Recommended
I.D.
shaft (h7) tolerance (D1)
O.D.
()
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 120 & up to 180
Exceeding 120 & up to 180
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
()
0.018
0.018
0.018
0.018
0.021
0.021
0.021
0.021
0.025
0.025
0.025
0.025
0.030
0.030
0.030
0.030
0.035
0.035
()
0.057
0.057
0.057
0.057
0.080
0.080
0.080
0.080
0.113
0.113
0.113
0.113
0.152
0.152
0.152
0.152
0.195
0.195
()
0.030
0.030
0.030
0.030
0.047
0.047
0.047
0.047
0.074
0.074
0.074
0.074
0.106
0.106
0.106
0.106
0.141
0.141
D3
max.
0.075
0.075
0.075
0.075
0.101
0.101
0.101
0.101
0.138
0.138
0.138
0.138
0.182
0.182
0.182
0.182
0.230
0.230
min.
0.030
0.030
0.030
0.030
0.047
0.047
0.047
0.047
0.074
0.074
0.074
0.074
0.106
0.106
0.106
0.106
0.141
0.141
()
0.049
0.059
0.055
0.051
0.059
0.071
0.065
0.078
0.065
0.078
0.078
0.091
0.078
0.091
0.091
0.106
0.097
0.106
()
0.022
0.026
0.022
0.026
0.026
0.032
0.026
0.032
0.026
0.032
0.032
0.037
0.032
0.037
0.037
0.043
0.043
0.043
Inner race
O.D. (e8)
()
0.032
0.040
0.040
0.050
0.040
0.050
0.050
0.060
0.050
0.060
0.060
0.072
0.060
0.072
0.072
0.085
0.072
0.085
()
0.059
0.073
0.073
0.089
0.073
0.089
0.089
0.106
0.089
0.106
0.106
0.126
0.106
0.126
0.126
0.148
0.126
0.148
Clearance
max.
0.086
0.106
0.106
0.114
0.106
0.128
0.128
0.152
0.128
0.152
0.152
0.180
0.152
0.180
0.180
0.211
0.180
0.211
min.
0.032
0.040
0.040
0.050
0.040
0.050
0.050
0.060
0.050
0.060
0.060
0.072
0.060
0.072
0.072
0.085
0.072
0.085
()
0.043
0.051
0.043
0.051
0.051
0.062
0.051
0.062
0.051
0.062
0.062
0.072
0.062
0.072
0.072
0.083
0.083
0.083
()
0.022
0.026
0.022
0.026
0.026
0.032
0.026
0.032
0.026
0.032
0.032
0.037
0.032
0.037
0.037
0.043
0.043
0.043
max.
0.043
0.051
0.043
0.051
0.051
0.062
0.051
0.062
0.051
0.062
0.062
0.072
0.062
0.072
0.072
0.083
0.083
0.083
min.
0.001
0.001
0.001
0.001
0.001
0.002
0.001
0.002
0.001
0.002
0.002
0.002
0.002
0.002
0.002
0.003
0.003
0.003
Split outer race type with the I.D. of over 100 to 1,250 mm / room temperature
I.D.
S.D.
O.D.
()
()
0.035
0.035
0.040
0.040
0.046
0.046
0.052
0.052
0.057
0.057
0.063
0.063
0.070
0.070
0.080
0.080
0.090
0.090
0.105
0.105
()
0.195
0.195
0.249
0.249
0.300
0.300
0.364
0.364
0.439
0.439
0.522
0.522
0.565
0.565
0.610
0.610
0.655
0.655
0.710
0.710
()
0.141
0.141
0.186
0.186
0.228
0.228
0.283
0.283
0.350
0.350
0.425
0.425
0.455
0.455
0.485
0.485
0.515
0.515
0.545
0.545
max.
0.230
0.230
0.289
0.289
0.346
0.346
0.416
0.416
0.496
0.496
0.585
0.585
0.635
0.635
0.690
0.690
0.745
0.745
0.815
0.815
min.
0.141
0.141
0.186
0.186
0.228
0.228
0.283
0.283
0.350
0.350
0.425
0.425
0.455
0.455
0.485
0.485
0.515
0.515
0.545
0.545
Outer race
I.D. (H7)
()
0.106
0.122
0.113
0.128
0.137
0.151
0.151
0.165
0.165
0.188
0.188
0.213
0.198
0.225
0.225
0.260
0.305
0.365
0.305
0.365
()
0.043
0.050
0.050
0.056
0.056
0.062
0.062
0.068
0.068
0.078
0.078
0.088
0.088
0.100
0.100
0.120
0.140
0.170
0.140
0.170
Inner race
O.D. (e8)
()
0.085
0.100
0.085
0.100
0.110
0.125
0.125
0.135
0.135
0.145
0.145
0.160
0.145
0.160
0.160
0.170
0.195
0.220
0.195
0.220
I.D. dimension of outer race of spherical bearing is H8 after it is set into a housing.
()
0.148
0.172
0.148
0.172
0.191
0.214
0.214
0.232
0.232
0.255
0.255
0.285
0.255
0.285
0.285
0.310
0.360
0.415
0.360
0.415
Clearance
max.
0.211
0.244
0.211
0.244
0.272
0.303
0.303
0.329
0.329
0.365
0.365
0.410
0.365
0.410
0.410
0.450
0.525
0.610
0.525
0.610
min.
0.085
0.100
0.085
0.100
0.110
0.125
0.125
0.135
0.135
0.145
0.145
0.160
0.145
0.160
0.160
0.170
0.195
0.220
0.195
0.220
()
0.083
0.096
0.096
0.108
0.108
0.119
0.119
0.131
0.131
0.148
0.148
0.168
0.168
0.190
0.190
0.225
0.265
0.320
0.265
0.320
()
0.043
0.050
0.050
0.056
0.056
0.062
0.062
0.068
0.068
0.078
0.078
0.088
0.088
0.100
0.100
0.120
0.140
0.170
0.140
0.170
max.
0.083
0.096
0.096
0.108
0.108
0.119
0.119
0.131
0.131
0.148
0.148
0.168
0.168
0.190
0.190
0.225
0.265
0.320
0.265
0.320
min.
0.003
0.004
0.004
0.004
0.004
0.005
0.005
0.005
0.005
0.008
0.008
0.008
0.008
0.010
0.010
0.015
0.015
0.020
0.015
0.020
Corporate Profile
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Technical
Information
Exceeding 100 Exceeding 120 & up to 180 Exceeding 120 & up to 180
& up to 120 Exceeding 180 & up to 250 Exceeding 180 & up to 250
Exceeding 120 Exceeding 120 & up to 180 Exceeding 180 & up to 250
& up to 180 Exceeding 180 & up to 250 Exceeding 250 & up to 315
Exceeding 180 Exceeding 250 & up to 315 Exceeding 250 & up to 315
& up to 250 Exceeding 315 & up to 400 Exceeding 315 & up to 400
Exceeding 250 Exceeding 315 & up to 400 Exceeding 315 & up to 400
& up to 315 Exceeding 400 & up to 500 Exceeding 400 & up to 500
Exceeding 315 Exceeding 400 & up to 500 Exceeding 400 & up to 500
& up to 400 Exceeding 500 & up to 630 Exceeding 500 & up to 630
Exceeding 400 Exceeding 500 & up to 630 Exceeding 500 & up to 630
& up to 500 Exceeding 630 & up to 800 Exceeding 630 & up to 800
Exceeding 500 Exceeding 500 & up to 630 Exceeding 630 & up to 800
& up to 630 Exceeding 630 & up to 800 Exceeding 800 & up to 1000
Exceeding 630 Exceeding 630 & up to 800 Exceeding 800 & up to 1000
& up to 800 Exceeding 800 & up to 1000 Exceeding 1000 & up to 1250
Exceeding 800 Exceeding 1000 & up to 1250 Exceeding 1250 & up to 1600
& up to 1000 Exceeding 1250 & up to 1600 Exceeding 1600 & up to 2000
Exceeding 1000 Exceeding 1000 & up to 1250 Exceeding 1250 & up to 1600
& up to 1250 Exceeding 1250 & up to 1600 Exceeding 1600 & up to 2000
Recommended
I.D.
shaft (h7) tolerance (D1)
Slide Shifter
Bearing dimension
(D1)
Air Bearings
Unit : mm
I.D. dimension of outer race of spherical bearing is H8 after it is set into a housing.
Metallic Bearing
S.D.
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Outer race
I.D. (H7)
Multi-layer Bearing
I.D.
Exceeding 10
& up to 14
Exceeding 14
& up to 18
Exceeding 18
& up to 24
Exceeding 24
& up to 30
Exceeding 30
& up to 40
Exceeding 40
& up to 50
Exceeding 50
& up to 65
Exceeding 65
& up to 80
Exceeding 80
& up to 100
Plastic Bearing
Bearing dimension
(D1)
Product
Information
SD2
D1
Split outer race type with the I.D. of up to 100 mm / room temperature
Unit : mm
352
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
353
On Design
Oiles 500 Spherical Bearings
Split outer race type with the I.D. of up to 100 mm / room temperature up to 200
Recommended
I.D.
shaft (h7) tolerance (D1)
I.D.
S.D.
O.D.
()
Exceeding 10
& up to 14
Exceeding 14
& up to 18
Exceeding 18
& up to 24
Exceeding 24
& up to 30
Exceeding 30
& up to 40
Exceeding 40
& up to 50
Exceeding 50
& up to 65
Exceeding 65
& up to 80
Exceeding 80
& up to 100
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 120 & up to 180
Exceeding 120 & up to 180
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
()
0.018
0.018
0.018
0.018
0.021
0.021
0.021
0.021
0.025
0.025
0.025
0.025
0.030
0.030
0.030
0.030
0.035
0.035
()
0.092
0.092
0.092
0.092
0.133
0.133
0.133
0.133
0.189
0.189
0.189
0.189
0.266
0.266
0.266
0.266
0.354
0.354
()
0.065
0.065
0.065
0.065
0.100
0.100
0.100
0.100
0.150
0.150
0.150
0.150
0.220
0.220
0.220
0.220
0.300
0.300
min.
0.065
0.065
0.065
0.065
0.100
0.100
0.100
0.100
0.150
0.150
0.150
0.150
0.220
0.220
0.220
0.220
0.300
0.300
Outer race
I.D. (H7)
()
0.049
0.059
0.055
0.051
0.059
0.071
0.065
0.078
0.065
0.078
0.078
0.091
0.078
0.091
0.091
0.106
0.097
0.106
()
0.022
0.026
0.022
0.026
0.026
0.032
0.026
0.032
0.026
0.032
0.032
0.037
0.032
0.037
0.037
0.043
0.043
0.043
Inner race
O.D. (e8)
()
0.032
0.040
0.040
0.050
0.040
0.050
0.050
0.060
0.050
0.060
0.060
0.072
0.060
0.072
0.072
0.085
0.072
0.085
()
0.059
0.073
0.073
0.089
0.073
0.089
0.089
0.106
0.089
0.106
0.106
0.126
0.106
0.126
0.126
0.148
0.126
0.148
Clearance
max.
0.086
0.106
0.106
0.114
0.106
0.128
0.128
0.152
0.128
0.152
0.152
0.180
0.152
0.180
0.180
0.211
0.180
0.211
min.
0.032
0.040
0.040
0.050
0.040
0.050
0.050
0.060
0.050
0.060
0.060
0.072
0.060
0.072
0.072
0.085
0.072
0.085
()
0.043
0.051
0.043
0.051
0.051
0.062
0.051
0.062
0.051
0.062
0.062
0.072
0.062
0.072
0.072
0.083
0.083
0.083
()
0.022
0.026
0.022
0.026
0.026
0.032
0.026
0.032
0.026
0.032
0.032
0.037
0.032
0.037
0.037
0.043
0.043
0.043
max.
0.043
0.051
0.043
0.051
0.051
0.062
0.051
0.062
0.051
0.062
0.062
0.072
0.062
0.072
0.072
0.083
0.083
0.083
min.
0.001
0.001
0.001
0.001
0.001
0.002
0.001
0.002
0.001
0.002
0.002
0.002
0.002
0.002
0.002
0.003
0.003
0.003
Unit : mm
I.D. dimension of outer race of spherical bearing is H8 after it is set into a housing.
Split outer race types with the I.D. of over 100 to 1,250 mm
S.D.
O.D.
Exceeding 100 Exceeding 120 & up to 180 Exceeding 120 & up to 180
& up to 120 Exceeding 180 & up to 250 Exceeding 180 & up to 250
Exceeding 120 Exceeding 120 & up to 180 Exceeding 180 & up to 250
& up to 180 Exceeding 180 & up to 250 Exceeding 250 & up to 315
Exceeding 180 Exceeding 250 & up to 315 Exceeding 250 & up to 315
& up to 250 Exceeding 315 & up to 400 Exceeding 315 & up to 400
Exceeding 250 Exceeding 315 & up to 400 Exceeding 315 & up to 400
& up to 315 Exceeding 400 & up to 500 Exceeding 400 & up to 500
Exceeding 315 Exceeding 400 & up to 500 Exceeding 400 & up to 500
& up to 400 Exceeding 500 & up to 630 Exceeding 500 & up to 630
Exceeding 400 Exceeding 500 & up to 630 Exceeding 500 & up to 630
& up to 500 Exceeding 630 & up to 800 Exceeding 630 & up to 800
Exceeding 500 Exceeding 500 & up to 630 Exceeding 630 & up to 800
& up to 630 Exceeding 630 & up to 800 Exceeding 800 & up to 1000
Exceeding 630 Exceeding 630 & up to 800 Exceeding 800 & up to 1000
& up to 800 Exceeding 800 & up to 1000 Exceeding 1000 & up to 1250
Exceeding 800 Exceeding 1000 & up to 1250 Exceeding 1250 & up to 1600
& up to 1000 Exceeding 1250 & up to 1600 Exceeding 1600 & up to 2000
Exceeding 1000 Exceeding 1000 & up to 1250 Exceeding 1250 & up to 1600
& up to 1250 Exceeding 1250 & up to 1600 Exceeding 1600 & up to 2000
Recommended
I.D.
shaft (h7) tolerance (D1)
()
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
()
0.035
0.035
0.040
0.040
0.046
0.046
0.052
0.052
0.057
0.057
0.063
0.063
0.070
0.070
0.080
0.080
0.090
0.090
0.105
0.105
()
0.354
0.354
0.458
0.458
0.572
0.572
0.651
0.651
0.729
0.729
0.847
0.847
0.890
0.890
0.935
0.935
0.980
0.980
1.035
1.035
()
0.300
0.300
0.395
0.395
0.500
0.500
0.570
0.570
0.640
0.640
0.750
0.750
0.780
0.780
0.810
0.810
0.840
0.840
0.870
0.870
min.
0.300
0.300
0.395
0.395
0.500
0.500
0.570
0.570
0.640
0.640
0.750
0.750
0.780
0.780
0.810
0.810
0.840
0.840
0.870
0.870
Outer race
I.D. (H7)
()
0.106
0.122
0.113
0.128
0.137
0.151
0.151
0.165
0.165
0.188
0.188
0.213
0.198
0.225
0.225
0.260
0.305
0.365
0.305
0.365
()
0.043
0.050
0.050
0.056
0.056
0.062
0.062
0.068
0.068
0.078
0.078
0.088
0.088
0.100
0.100
0.120
0.140
0.170
0.140
0.170
Inner race
O.D. (e8)
()
0.085
0.100
0.085
0.100
0.110
0.125
0.125
0.135
0.135
0.145
0.145
0.160
0.145
0.160
0.160
0.170
0.195
0.220
0.195
0.220
I.D. dimension of outer race of spherical bearing is H8 after it is set into a housing.
()
0.148
0.172
0.148
0.172
0.191
0.214
0.214
0.232
0.232
0.255
0.255
0.285
0.255
0.285
0.285
0.310
0.360
0.415
0.360
0.415
Clearance
max.
0.211
0.244
0.211
0.244
0.272
0.303
0.303
0.329
0.329
0.365
0.365
0.410
0.365
0.410
0.410
0.450
0.525
0.610
0.525
0.610
min.
0.085
0.100
0.085
0.100
0.110
0.125
0.125
0.135
0.135
0.145
0.145
0.160
0.145
0.160
0.160
0.170
0.195
0.220
0.195
0.220
()
0.083
0.096
0.096
0.108
0.108
0.119
0.119
0.131
0.131
0.148
0.148
0.168
0.168
0.190
0.190
0.225
0.265
0.320
0.265
0.320
()
0.043
0.050
0.050
0.056
0.056
0.062
0.062
0.068
0.068
0.078
0.078
0.088
0.088
0.100
0.100
0.120
0.140
0.170
0.140
0.170
max.
0.083
0.096
0.096
0.108
0.108
0.119
0.119
0.131
0.131
0.148
0.148
0.168
0.168
0.190
0.190
0.225
0.265
0.320
0.265
0.320
min.
0.003
0.004
0.004
0.004
0.004
0.005
0.005
0.005
0.005
0.008
0.008
0.008
0.008
0.010
0.010
0.015
0.015
0.020
0.015
0.020
Unit : mm
Technical Information
Selection Guide
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 50 & up to 80
Exceeding 120 & up to 180
Exceeding 180 & up to 250
Exceeding 250 & up to 315
Exceeding 315 & up to 400
Exceeding 400 & up to 500
Exceeding 630 & up to 800
Exceeding 800 & up to 1000
Exceeding 1000 & up to 1250
Exceeding 1250 & up to 1600
Exceeding 1600 & up to 2000
Exceeding 2500 & up to 3150
()
()
()
()
max.
min.
()
()
()
()
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.015
0.018
0.021
0.025
0.030
0.035
0.040
0.046
0.052
0.057
0.063
0.070
0.080
0.090
0.105
0.125
0.150
0.175
0.210
0.040
0.057
0.080
0.113
0.152
0.195
0.249
0.300
0.364
0.439
0.522
0.565
0.610
0.655
0.710
0.780
0.855
0.955
1.045
0.018
0.030
0.047
0.074
0.106
0.141
0.186
0.228
0.283
0.350
0.425
0.455
0.485
0.515
0.545
0.585
0.625
0.675
0.715
0.055
0.075
0.101
0.138
0.182
0.230
0.289
0.346
0.416
0.496
0.585
0.635
0.690
0.745
0.815
0.905
1.005
1.130
1.255
0.018
0.030
0.047
0.074
0.106
0.141
0.186
0.228
0.283
0.350
0.425
0.455
0.485
0.515
0.545
0.585
0.625
0.675
0.715
0.015
0.018
0.021
0.025
0.030
0.035
0.040
0.046
0.052
0.057
0.063
0.070
0.080
0.090
0.105
0.125
0.150
0.175
0.210
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.0075
0.0090
0.0105
0.0125
0.0150
0.0175
0.0200
0.0230
0.0260
0.0285
0.0315
0.0350
0.0400
0.0450
0.0525
0.0625
0.0750
0.0875
0.1050
0.0075
0.0090
0.0105
0.0125
0.0150
0.0175
0.0200
0.0230
0.0260
0.0285
0.0315
0.0350
0.0400
0.0450
0.0525
0.0625
0.0750
0.0875
0.1050
Unit : mm
Up to 10
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 50 & up to 80
Exceeding 80 & up to 120
Exceeding 120 & up to 180
Exceeding 180 & up to 250
Exceeding 250 & up to 315
Exceeding 315 & up to 400
Exceeding 500 & up to 630
Exceeding 630 & up to 800
Exceeding 800 & up to 1000
Exceeding 1000 & up to 1250
Exceeding 1600 & up to 2000
Exceeding 2000 & up to 2500
Exceeding 2500 & up to 3150
()
()
()
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.015
0.018
0.021
0.025
0.030
0.035
0.040
0.046
0.052
0.057
0.063
0.070
0.080
0.090
0.105
0.125
0.150
0.175
0.210
0.057
0.092
0.133
0.189
0.266
0.354
0.458
0.572
0.651
0.729
0.847
0.890
0.935
0.980
1.035
1.105
1.180
1.280
1.370
0.035
0.065
0.100
0.150
0.220
0.300
0.395
0.500
0.570
0.640
0.750
0.780
0.810
0.840
0.870
0.910
0.950
1.000
1.040
max.
0.072
0.110
0.154
0.214
0.296
0.389
0.498
0.618
0.703
0.786
0.910
0.960
1.015
1.070
1.140
1.230
1.330
1.455
1.580
min.
0.035
0.065
0.100
0.150
0.220
0.300
0.395
0.500
0.570
0.640
0.750
0.780
0.810
0.840
0.870
0.910
0.950
1.000
1.040
()
0.015
0.018
0.021
0.025
0.030
0.035
0.040
0.046
0.052
0.057
0.063
0.070
0.080
0.090
0.105
0.125
0.150
0.175
0.210
()
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
()
0.0075
0.0090
0.0105
0.0125
0.0150
0.0175
0.0200
0.0230
0.0260
0.0285
0.0315
0.0350
0.0400
0.0450
0.0525
0.0625
0.0750
0.0875
0.1050
()
0.0075
0.0090
0.0105
0.0125
0.0150
0.0175
0.0200
0.0230
0.0260
0.0285
0.0315
0.0350
0.0400
0.0450
0.0525
0.0625
0.0750
0.0875
0.1050
Unit : mm
Corporate Profile
()
O.D. js7
Technical
Information
I.D.
Recommended
hole (H7)
Slide Shifter
Exceeding 30 & up to 50
Dimension tolerance
Clearance
Air Bearings
Bearing dimension
Recommended
shaft (h7)
Metallic Bearing
O.D. js7
Multi-layer Bearing
Recommended
hole (H7)
Plastic Bearing
I.D.
Product
Information
Up to 10
Exceeding 10 & up to 18
Recommended
shaft (h7)
Dimension tolerance
Clearance
354
Selection Guide
On Design
Oiles 2000
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
I.D.
O.D.
()
Up to 10
Exceeding 10 & up to 18
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Technical
Information
Corporate Profile
Exceeding 50 & up to 65
Exceeding 65 & up to 80
Exceeding 50 & up to 65
0
0
355
Exceeding 30 & up to 50
Exceeding 65 & up to 80
Exceeding 50 & up to 80
Dimension tolerance
I.D.
Recommended
I.D.
after press fit
shaft(h7)
before press fit (ref.value)
Bearing dimension
Exceeding355& up to 400
Exceeding355& up to 400
()
()
()
()
()
Clearance
max.
min.
()
Interference
()
() max. min.
0.034 0.005
0.023
0.034
Technical Information
Dimension tolerance
()
Up to 10
Exceeding 10 & up to 18
Exceeding 10 & up to 18
Exceeding 18 & up to 30
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 18 & up to 30
Exceeding 30 & up to 50
Exceeding 30 & up to 50
Exceeding 50 & up to 65
Exceeding 65 & up to 80
Exceeding 50 & up to 65
Exceeding355& up to 400
0
0
max.
min.
()
()
()
() max. min.
0.034 0.005
0.023
0.034
Technical
Information
Exceeding355& up to 400
()
Slide Shifter
()
Air Bearings
()
Metallic Bearing
()
Interference
Multi-layer Bearing
Exceeding 65 & up to 80
Exceeding 50 & up to 80
()
Plastic Bearing
O.D.
Clearance
Product
Information
I.D.
Exceeding 10 & up to 18
Dimension tolerance
I.D.
Recommended
I.D.
after press fit
shaft(h7)
before press fit (ref.value)
Bearing dimension
Selection Guide
Oiles 2000
Corporate Profile
356
Selection Guide
On Design
Corrosion Resistance of Base Resin and Base Metal used for Oiles Bearings
Corrosion resistance
Corporate Profile
357
Acid
Alkaline
Solvent
Oil, grease and others
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Classification
Base resin
Polyacetal
Product
80
Lutech
480
Drymet ST
10 Sulphric acid
Polyolefine
Polyamide
PTFE
PPS
Phenol resin
81
83
Glitron F
Fiberflon
Drymet LF
Techmet
Hiplast
Glitron S, SE
250
425
470
30 Sulphric acid
Hydrochloric acid
10 nitric acid
40 nitric acid
Formic acid
75 phosphate acid
10 chromic acid
Lactic acid
Hydrogen peroxide
Liquefied chlorine
Ammonia (liquid)
Iron chloride
Calcium chloride
Sulfur
Calcium Hydroxide
Methanol
Acetone
Benzene
Carbon tetracholoride
Ethylene glycol
Petroleum
Lubricating oil
Animal oil
Vegetable oil
Oleic acid
Gasoline
Kerosene
Naphtha
Lacquer
Water
Sea water
Technical Information
Selection Guide
Corrosion resistance
Bronze cast
Aluminum bronze
Cast iron
Product
500SP
500B
500AB
500F
40 to 80 Sulfuric acid
80 to 95 Sulfuric acid
Hydrochloric acid
Nitric acid
Phosphoric acid
Chromic acid
Lactic acid
Hydrogen peroxide
Chlorine (moist)
Chlorine (dry)
Ammonia (moist)
Ammonia (dry)
Ferrous chloride
Calcium chloride
Sulfur (moist)
Methanol
Acetone
Ethylene glycol
Crude oil
Heavy oil
Lubricating oil
Gasoline
Kerosene
Lacquer
Water
Sea water
B : Good
C : fair
D : no resistance
Technical
Information
A : Excellent
Animal oil
Vegetable oil
Slide Shifter
Toluene
Carbon tetracholoride (moist)
Air Bearings
Sulfur (dry)
Calcium Hydroxide
Metallic Bearing
Alkaline
Multi-layer Bearing
Solvent
Base metal
Plastic Bearing
Metallic bearings
Product
Information
Acid
Classification
: No data
Corporate Profile
358
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Design Materials
Unit Conversion Table
This catalog shows values in the conventional units in parentheses as the second stage of introducing the SI unit
system specified in JIS. The table below shows the conversion expressions of the SI units and other major units.
Quantity
Length
1mm=0.03937in, 1in=25.400mm
Mass
Force
1N=0.22481lbf, 1lbf=4.4483N
1N/mm 2=1MPa=1.0197210kgf/cm 2
Stress
Velocity
1m/s=196.850f/min, 1f/min=0.00508m/s
Rotational frequency
1s -1=60rpm, 1rpm=0.01667s -1
Cycle speed
1s -1=60cpm, 1cpm=0.01667s -1
Angle
Temperature
Air Bearings
Conversion formula
Viscosity
Kinetic viscosity
, 1
rad
1rad= 180
= 180
C
5
F= 9
5 +32, C= 9 ( F 32)
Corporate Profile
Technical
Information
Specific heat
359
1kcal/(kg
C)=4.1860510 3J/(kgK)
International System of Units (SI)
An international unified unit system adopted and recommended in the 11th International Conference of Weights
and Measures in 1960 for international unification of the metric MKS system and yard-pound unit system.
Technical Information
Selection Guide
Storage Instructions
Basis
of Storage Instructions
Do
Places
Precautions
Slide Shifter
to use it.
Do not hit any other objects against the bearings.
Observe the first-in, first-out principle when using in-stock bearings.
Air Bearings
Other
Metallic Bearing
humidity.
Do not expose the bearings to direct sunlight.
Do not place the bearings directly on the ground. Place them on
shelves, etc.
Do not store the bearings in a place subject to remarkable
temperature changes or dew condensation.
Do not store the bearings in an environment with corrosive
atmosphere.
Multi-layer Bearing
Plastic Bearing
Storage
Product
Information
not have bearings lose their functions such as leak of impregnated lubricating oil and change of the
sliding surface materials.
Do not allow the bearings to deform.
Do not allow rust, corrosion, or other harmful chemical changes to the bearings.
Technical
Information
Corporate Profile
360
361
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Corporate Profile
Applications for Oiles Bearings
Technology News
Oiles Products
R D / Test and Measurement Equipments
Corporate Chronology / Corporate Profile / Network
Product INDEX
P.363
P.371
P.373
P.377
P.379
P.383
362
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
363
Support Yoke
Body
Steering Column Bushing
Product
Information
Control
Plastic Bearing
Multi-layer Bearing
Steering
Metallic Bearing
Air Bearings
Slide Shifter
Suspension
Technical
Information
Corporate Profile
Rack Bushing
364
Selection Guide
PlasticMulti-Layer Bearings
FAX machines
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Copy machines Oiles Lutech, Oiles Glitron, Oiles 80, Oiles 81, Oiles Techmet
Air Bearings
Slide Shifter
Corporate Profile
Technical
Information
365
Selection Guide
Product
Information
Plastic Bearing
Gear type
Multi-layer Bearing
Metallic Bearing
Piston/cradle type
Cross link bearing
Mast
Shift Levers
Rear Axle
Steering Cylinder
Air Bearings
Forklift Oiles 80, Oiles 50, Oiles 83, Oiles 88, Oiles 250, Oiles Drymet LF
Slide Shifter
Pedals
Technical
Information
Side Shifter
Corporate Profile
366
Selection Guide
Multi-layerMetallic Bearings
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
367
Product
Information
Plastic Bearing
Multi-layer Bearing
Air Bearings
Metallic Bearing
Slide Shifter
Technical
Information
Corporate Profile
368
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
369
Cable hanger
Tower links
Product
Information
Selection Guide
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
370
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
371
Technology News
Selection Guide
Product
Information
Plastic Bearing
one end of the bridge, and opens when a large ship passes
Multi-layer Bearing
Metallic Bearing
Name
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
372
Product
Information
Selection Guide
Seismic Isolated
Plastic Bearing
Without
Seismic Isolation
Multi-layer Bearing
Metallic Bearing
Seismic Force
Air Bearings
Slide Shifter
Technical
Information
Corporate Profile
373
Seismic Isolation
Devices
Floor Isolation
Oiles Products
With Vibration
control devices
Selection Guide
Without vibration
control devices
Vibration
Control Devices
Product
Information
VWD
Plastic Bearing
Vibration
control
devices
(Viscous Wall Damper)
Multi-layer Bearing
Seismic Force
Slide Shifter
Air Bearings
CFD
Metallic Bearing
BMD
(Bingham Material Damper)
Technical
Information
Corporate Profile
374
Corporate Profile
Technical
Information
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Window Operator
Top Light
Oiles Products
Selection Guide
Product
Information
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
Sunshady
Sunshady
376
Slide Shifter
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Corporate Profile
Technical
Information
377
Metallic Bearing
Air Bearings
Themal analyzer
Slide Shifter
Technical
Information
X-ray diffractometer
Corporate Profile
378
Air Bearings
Metallic Bearing
Multi-layer Bearing
Plastic Bearing
Product
Information
Selection Guide
Corporate Chronology
1939
1952
1954
1961
1962
Yamato Plant established in Kanagawa Prefecture Production and sales of Oiles Bridge Bearings began
1966
1967
1970
Production and sales of Oiles Drymet . Shiga Plant established in Shiga Pref.
1971
Oiles 500SP successfully tested at Bureau of Reclamation, U.S. Dept. of the Interior.
1973
Received Okochi Memorial Prize for the Oiles 80. Production and Sales of Cable Operator commenced.
1974
1976
1977
1981
1983
1986
1987
The earthquake isolation structured Technical Center completed in the Fujisawa Plant.
1988
1989
Registration of Oiles stock to the Japan Securities Dealers Association as an issue on the over-thecounter market
1991
1993
Ashikaga Plant established in Tochigi Pref. Production and sales of Oiles Floor Isolation System & Oiles
Seismic Damping Wall
1994
Oiles Corporation listed on the Second division of the Tokyo Stock Exchange.
Corporate Profile
Technical
Information
Slide Shifter
1995
379
1997
1998
1999
2000
2002
2003
2004
2005
2005
2011
2013
http://www.oiles.co.jp/en/
March 11, 1952
8,585 million yen
1-2-70 Kounan, Minato-ku, Tokyo, Japan
1,121 (as of March, 2015)
Patents : 2,142 (foreign 792; USA 200, Germany 99, China 96, France 87, etc.)
Utility models : 601
Registered designs : 25
Trademarks : 617 including 201 which we acquired abroad
Industry property pending : 757 including 471 abroad
Product
Information
Incorporation
Capital
Head Office
Number of Employees
Industrial Properties
URL
Selection Guide
Corporate Profile
Plastic Bearing
SHIGA PLANT
ASHIKAGA PLANT
Multi-layer Bearing
Headquarters
Branches
Plants
Affiliated companies
Metallic Bearing
OITA PLANT
Production Items:550,
Plastic Self-Lubricating Bearings
Air Bearings
FUJISAWA PLANT
Slide Shifter
International Operations
<Contact info>
Bearing Division 1: Please contact to bearing division 1 for application other than Automotive, motorcycle, and autotruck.
Bearing Division 2: Please contact to bearing division 2 for application of automotive, motor cycle, and autotruck.
Corporate Profile
Technical
Information
380
Plastic Bearing
Product
Information
Selection Guide
Group Companies
Headquarters
Sales & Manufacturing
Sales Ofces
Distributors
Liaison Ofce
Air Bearings
Metallic Bearing
Multi-layer Bearing
Manufacturing Companies
WORLDWIDE FACILITIES
Corporate Profile
Technical
Information
Slide Shifter
ASIA
381
OILES CORPORATION
KOREA LIAISON OFFICE
R/No.1112, OPULENCE, 254, Seocho-daero,
Seocho-gu, Seoul, 137-873, KOREA
TEL: 82-2-581-5629 FAX: 82-2-588-2382
TAIWAN OILES INDUSTRY CO., LTD.
No.236 Nanshang Rd., Guishan Shiang,
Taoyuan County, 333 Taiwan
TEL: 886-3-321-8596 FAX: 886-3-321-8897
EUROPE
NORTH AMERICA
Network
Selection Guide
Product
Information
HEADQUARTERS
Plastic Bearing
Multi-layer Bearing
Metallic Bearing
DISTRIBUTORS
ASIA
AUROTEK CORPORATION
1st F., No.60, Jhouzih St, Neihu District,
Taipei 114, Taiwan
TEL: 886-2-8752-3311 FAX: 886-2-8752-3347
DRIP ELASTOTEK
19 Janata Road, New Santoshpur Kolkata-700075 India
TEL: 91-33-2416-3462 FAX: 91-33-2416-3462
OCEANIA
EUROPE
JOHNSON METALL AB
Stalgatan 15, BOX 1513, SE-701 15 Orebro, Sweden
TEL: 46-19-17-5100 FAX: 46-19-14-8340
OY JOHNSON METALL AB
Turkkirata 14, 33960 Pirkkala, Finland
TEL: 358-(0)3-342-7700 FAX: 358-(0)3-342-7728
Corporate Profile
Technical
Information
MACMARKETINGCORPORATION
14A, Imperial Court, 33/1, CunninghamRoad,
Bangalore 560052 India
TEL: 91-80-22200290 FAX: 91-80-2205895
Slide Shifter
KI IL CO., LTD.
KL B/D 11,Yeonnam-ro, Mapo-gu, Seoul,121-869,
KOREA
TEL: 82-2-322-30313 FAX: 82-2-338-2918
Air Bearings
382
80
Bushings
Flange bushings
Washers
Bar stock
Plate material
Pipe stock
Pillow 80
Flange units
Pillow type units
PS Bearings (Plastic thrust bearing units)
Lutech S (Custom-made product)
Lutech E
Bushings
Snap-fit bushings
Bar stock
Lutech GP (Custom-made product)
480
Bar stock
81 (Custom-made product)
83
Washers
88 (Custom-made product)
88 Elastomer (Custom-made product)
88-03
Bar stock
Glitron F
Bushings
Flange bushings
Bar stock
Skiving sheet
Bushings
Plate material
Glitron S (Custom-made product)
Glitron SE
Bushings (GEB)
Flange bushings (GEF)
Bushings (GSB)
Flange bushings (GSF)
50 (Custom-made product)
Aramid M
Bar stock
Bushings
Discs
Plate material
Balls
Aramid F1
Bar stock
Discs
250
425
Pipe stock
Bar stock
Plate material
Fiberflon FW
Bushings
Fiberflon TR (Custom-made product)
Fiberflon OH (Custom-made product)
470-02/02W
Split bearings for flocculator (Made-to-order product)
Flocculator bearing units (Made-to-order product)
Page
65
67
69
71
73
74
75
76
77
78
79
81
83
85
86
86
87
89
90
91
93
72
95
96
97
98
99
101
102
103
103
104
104
105
105
109
110
111
112
113
115
117
117
118
118
119
116
120
120
121
123
125
126
126
127
128
129
130
131
133
134
Multi-layer bearings
383
Drymet ST
Bushings
Washers
Plates
Drymet LF
Bushings
Flange bushings
Washers
Flange bushings (t0.5)
Plates
LF Guides
Techmet B/E
Bushings (Custom-made product)
Toughmet
Bushings
Toughmet D
Bushings
Plates
Hiplast N/E
Flange bushings
Metallic Bearings
Page
181
183
187
189
191
193
195
196
197
199
201
203
204
205
206
207
209
210
211
213
215
217
219
220
223
225
227
229
230
231
233
235
236
237
239
240
241
243
245
247
248
249
250
251
253
254
255
257
261
262
263
264
265
266
266
Air Bearings
Slide Shifters
137
141
145
146
147
151
155
157
158
159
160
162
164
166
167
169
171
173
175
178
500SP1
Bushings
SL-4 Bushings
Flange bushings
Thrust bushings
Thrust washers
Flange guide bushings
Guide bushings
Wear plates
Flat plates
L type plates
Slide guide rails
Slide guide rails for additional machining
500SP4 (Custom-made product)
500SP5 (Custom-made product)
500SPR
500HP
Bushings
500AB (Custom-made product)
500B
Bushings
500F
Guide bushings
Wear plates
500 spherical bearings
2000
Bushings
Bushings (High precision type)
Flange bushings (High precision type)
Wear plates 5mm thickness (CWT)
Wear plates 10mm thickness (CWX)
Wear plates 10mm thickness (CWXT)
Wear plates 10mm thickness (CWA)
Wear plates 20mm thickness (CWP)
Wear plates 20mm thickness (CWPT)
Plates for additional machining (CWI)
Shoe units
2000S (Custom-made product)
Cermet M
Bushings
Flange bushings
Bar stock
Bushing material
Cermet G
Bar stock
Bushing material
300
Bushings (thin wall)
Flange bushings
Washers
Bar stock
Bushing material
600
Bar stock
Bushing material
S Type
SE Type
BA Type (BTCA)
BA Type (BTSA)
BC Type
BF Type
BH
BHS
Guide Shafts
BTU Type (Made-to-order product)
500 Guide Units BK Type
500 Guide Units BT Type
275
279
289
293
295
299
303
304
307
311
315
319
Page
25S
25M
25P
30B
30F
30M
30S
30W
36M
36S
47H
48M
54B
54F
54M
54S
55M
55S
70B
70P
70W
77B
77F
77M
77SH
77S
77P
80B
80F
80FL
80M
80P
80S
80W
80UP
83W
Page
125
126
126
257
261
263
264
262
266
266
FFB
FWP
FWPT
GEB
GEF
GSB
GSF
HPB
HPF
LED
LES
133
90
247
248
249
250
253
254
141
146
145
101
102
103
103
104
104
67
69
77
73
74
75
71
78
72
LEM
LFB
LFCF
LFF
LFG
LFP
LFW
PAC
PST
SFP
SGB
SGF
SLC
SLI
SLP
SPB
SPBL
SPF
SPFG
SPS
SPW
SWP
TCB
TMB
TMDB
TMDP
UPF
Alphabetical Order
128
221
220
109
110
111
112
210
178
85
86
86
151
158
155
161
159
157
242
80
199
196
195
203
204
201
183
187
189
191
224
193
197
164
167
171
173
134
ABG
AF1D
AF1M
AMD
AMM
AMP
AMS
BCB
BBFK
BBT
CBB
CLB
CLF
CWA
CWI
CWP
CWPT
CWT
CWX
CWXT
FGB
119
120
120
118
117
118
117
215
317
321
227
229
230
236
240
237
239
231
233
235
219
BGS
BGSP
BH
BHS
BTC
BTCA
BTF
BTSA
BTU
GR
GRE
STC
STE
STF
STFE
308
308
303
304
297
290
301
293
313
277
281
277
281
277
281
384
CAUTIONS
The typical values of the mechanical and physical characteristics shown in this catalog
conform to the corresponding JIS Standards, in principle.
The specifications or information in this catalog are subject to change without prior
notice.
OILES, Oiles logo, Oiles Drymet, Drymet, Toughmet, Oiles Cermet, Hiplast, Fiberflon, Glitron, Oiles Metal,
Technolight, Oiles Aramid, Oiles Lutech, are registered trademarks of Oiles Corporation.
385
Bearing Shape, Dimension and Tolerance (or attach drawing and with specifications)
Cutoff Line
Shape
Shaft
Mating Bearing
Using Conditions
Bushing Flange Bushing Plate Washer Other
Dimension/Tolerance :
Material :Hardness :Surface Roughness :Surface Treatment :
Dimension/Tolerance :
Movable Part : Other Part
Housing Dimension/Tolerance :
Bearing
Type of Motion :
Rotation Oscillation Reciprocation
Hours of Service :
Load :
PV Value :
Intermittent
Moving Stroke :
h/day
kgf N
No. of Cycles :
Fluctuation : Yes No
Pressure :
kgf/ N/
Impact : Yes No
Velocity :
kgf/m/min N/m/sec
cpm
m/min m/sec
Revolutions :
rpm
Seal : Yes No
Company :
Dept. Name :
Name :
Address :
e-mail :
Phone :
Fax :
MEMO
387
MEMO
388
MEMO
389