Professional Documents
Culture Documents
STANDARD
ICS: 13.220.20
Descriptors: fire hydrant, system equipment, valves, dry risers
Copyright 2011
DEPARTMENT OF STANDARDS MALAYSIA
SIRIM Berhad
(Company No. 367474 - V)
1, Persiaran Dato Menteri
Section 2, P.O. Box 7035
40700 Shah Alam
Selangor Darul Ehsan
MALAYSIA
E-mail: central@standardsmalaysia.gov.my
E-mail: msonline@sirim.my
Engineering Industry
Standards Committee and endorsed by the Council of the Standards and Industrial Research
Institute of Malaysia (SIRIM) was published under the authority of the SIRIM Council in
February, 1991.
SIRIM wishes to draw attention to the fact that this Malaysian Standard does not purport to
include all the necessary provisions of a contract.
The Malaysian
industries concerned. Suggestions for improvements will be recorded and in due course brought
to the notice of the Committees charged with the revision of the standards to which they refer.
Date of issue
Text affected
CONTENTS
Page
Committee representation
Foreword
Scope
Definitions
Pressure rating
Temperature rating
Marking
Materials
Valve bodies
Valve inlets
10
Valve outlets
11
Bonnets
12
Wedge gates
10
13
Stems
10
14
Stem sealing
10
15
Glands
11
16
11
17
Bolting
11
18
Pressure retention
11
19
Strap
11
20
12
MS 1210 : Part 2
1991
CONTENTS, (Contd.)
Page
SECTION THREE: PRODUCTION TESTING REQUIREMENTS AND
TEST CERTIFICATE
21
12
22
Test certificate
12
11
Tables
Appendices
A
13
14
Publications referred to
15
Committee representation
The Mechanical Engineering Industry Standards Committee under whose supervision this Malaysian Standard was prepared,
comprises representatives from the following Government Ministries, trade, commerce and manufacturer associations and
scientific and professional bodies.
Malaysian Motor Vehicle Assemblers Association
Ministry of Works and Utilities (Public Works Department)
Ministry of Manpower (Factory and Machinery Departmen.t)
Malaysian Industrial Development Authority (MIDA)
Universiti Teknologi Malaysia
Institution of Engineers(Malaysia)
Ministry of Defence (Defence Science and Technology Centre)
The Technical Committee on Fire Prevention and Protection comprising which prepared this Malaysian Standard consists of
the following representatives:
BOMBA
Kementerian Pertahanan
IEM
Persatuan Insuran Am Malaysia
PAM
MFPA
Persatuan Keselamatan Perindustrian Malaysia (MSIS)
JKJ
Standards and Industrial Research Institute of Malaysia
The Technical Sub-Committee on Equipment for Fire Prevention and Protection comprising which prepared this Malaysian
Standard consists of the following representatives
1
Encik M. Chelliah (Chairman)
Mejar Akbar Din
Encik Yusof Sidek/Encik Pauzan Ahmad
Cik Patsy Chia
BOMBA
Kementerian Pertahanan
BOMBA
MSIS
TEM
Standards and Industrial Research Institute of Malaysia
Co-opted members
Encik William Kong
Encik Michael Toh
Encik
Encik
Encik
Encik
Allen Wong/
Desmond De Itozaria
Y.S. Ong
T.W. Chow
MFPA
Standards and Industrial Research Institute of Malaysia
FOREWORD
This Malaysian Standard was prepared by the Technical Sub-committee on Equipment for Fire
Prevention and Protection formed by the Technical Committee on Fire Prevention and Protection
under the authority of the Mechanical Engineering Industry Standards Committee.
This standard was based on BS 5041: Part 2: 1987 Fire hydrant systems equipment, specification
for landing valves for dry risers, which specifies requirements for copper alloy gate valves for
use on dry risers, test and marking.
The subjects of tile other Parts in tile MS 1210 series of general specifications for fire hydrant
systems equipment are as follows.
Part
Part
Part
Part
1.
3.
4.
5.
These Parts give detailed requirements for most of the other special items required fOr wetand
dry risers described in *BS 5306 : Part 1.