Fan is very common in every place be it home,office etc
-Let us take an example of a ceiling fan, initially the electrician fits it in the ceiling and gives electrical supply and connection to it by connecting it with a switch.
DISTRIBUTION:
-The fan is brought from a store and the other necessary components to run it like the switches, connecting wires etc
-The vendor receives it from a wholeseller,which in turn receives it from distributor, large manufacturer in packed boxes.
PACKAGING:
-The product is packed such that the blades and the body of the fan are packed separately.The canopies and packed separately.
QUALITY TESTING:
-Before the product is packed, it is tested for the quality, speed(rpm) and any other defects.
ASSEMBLING OF TOP COVER,BOTTOM COVER AND THE SPINDLE:
-The fan is assembled by fixing the outer body and the motor together as a single unit.
PAINTING OF THE BLADES AND THE COVERS:
-The blades and the outer case(canopies) for the motor is painted separately.
FITTING OF BLADE CARRIER
-blade carrier are fitted together with a tap and die to keep it intact.
PRESSING:
-The blades are formed by the pressing method by dies.The commonly used blade size for the household are 50"-55"
-The raw material for the blades are obtained like aluminium or plastic.The fan size ranges from 13"-99"
TESTING OF THE MOTOR SPEED:
-For the motor part, it is tested for the speed before the assembling process.
ASSEMBLING OF ROTOR AND STATOR:
-The rotor and the stator are fitted in body
-The axle is fitted and the windings,bearings, capacitor are placed.
TOOLING AND GRINDING:
-The metal used to make the stator and rotor undergoes tooling and grinding process.
PURCHASE OF OTHER REQUIRED ENTITIES
-The capacitor, bearings, down rod are purchased from other manufacturing units according to the fan size.
DESIGNING:
-Various sizes of fan can be produced by changing the sweep of the fan.The sweep or the size of a ceiling fan is the measure from end to end diameter. When you switch on the fan, the total circle that is visible is the sweep of the fan. The fan is designed by a designing team.
-Large Fans - 60" and Larger are used For rooms approximately 15' x 15' and larger
-standard fan size 49"-56" are used For rooms approximately 12' x 12' or so.
-Medium size fans 37"-48" are used For rooms approximately 10' x 10' or so.
-Small size fans 36" and smaller are used For rooms approximately 6' x 6' or so.
R&D:
-Research and Development of fan is done by a team of members on the existing techniques and thereby making new changes and introducing new,simpler,efficient concepts.
REQUIREMENTS:
-Different size of fan is manufactured for different sizes of the room and the fan sweep plays an important role in the amount of air circulated by it.
-A Survey is conducted to know the needs and requirements of the customers
Fan is very common in every place be it home,office etc
-Let us take an example of a ceiling fan, initially the electrician fits it in the ceiling and gives electrical supply and connection to it by connecting it with a switch.
DISTRIBUTION:
-The fan is brought from a store and the other necessary components to run it like the switches, connecting wires etc
-The vendor receives it from a wholeseller,which in turn receives it from distributor, large manufacturer in packed boxes.
PACKAGING:
-The product is packed such that the blades and the body of the fan are packed separately.The canopies and packed separately.
QUALITY TESTING:
-Before the product is packed, it is tested for the quality, speed(rpm) and any other defects.
ASSEMBLING OF TOP COVER,BOTTOM COVER AND THE SPINDLE:
-The fan is assembled by fixing the outer body and the motor together as a single unit.
PAINTING OF THE BLADES AND THE COVERS:
-The blades and the outer case(canopies) for the motor is painted separately.
FITTING OF BLADE CARRIER
-blade carrier are fitted together with a tap and die to keep it intact.
PRESSING:
-The blades are formed by the pressing method by dies.The commonly used blade size for the household are 50"-55"
-The raw material for the blades are obtained like aluminium or plastic.The fan size ranges from 13"-99"
TESTING OF THE MOTOR SPEED:
-For the motor part, it is tested for the speed before the assembling process.
ASSEMBLING OF ROTOR AND STATOR:
-The rotor and the stator are fitted in body
-The axle is fitted and the windings,bearings, capacitor are placed.
TOOLING AND GRINDING:
-The metal used to make the stator and rotor undergoes tooling and grinding process.
PURCHASE OF OTHER REQUIRED ENTITIES
-The capacitor, bearings, down rod are purchased from other manufacturing units according to the fan size.
DESIGNING:
-Various sizes of fan can be produced by changing the sweep of the fan.The sweep or the size of a ceiling fan is the measure from end to end diameter. When you switch on the fan, the total circle that is visible is the sweep of the fan. The fan is designed by a designing team.
-Large Fans - 60" and Larger are used For rooms approximately 15' x 15' and larger
-standard fan size 49"-56" are used For rooms approximately 12' x 12' or so.
-Medium size fans 37"-48" are used For rooms approximately 10' x 10' or so.
-Small size fans 36" and smaller are used For rooms approximately 6' x 6' or so.
R&D:
-Research and Development of fan is done by a team of members on the existing techniques and thereby making new changes and introducing new,simpler,efficient concepts.
REQUIREMENTS:
-Different size of fan is manufactured for different sizes of the room and the fan sweep plays an important role in the amount of air circulated by it.
-A Survey is conducted to know the needs and requirements of the customers
Fan is very common in every place be it home,office etc
-Let us take an example of a ceiling fan, initially the electrician fits it in the ceiling and gives electrical supply and connection to it by connecting it with a switch.
DISTRIBUTION:
-The fan is brought from a store and the other necessary components to run it like the switches, connecting wires etc
-The vendor receives it from a wholeseller,which in turn receives it from distributor, large manufacturer in packed boxes.
PACKAGING:
-The product is packed such that the blades and the body of the fan are packed separately.The canopies and packed separately.
QUALITY TESTING:
-Before the product is packed, it is tested for the quality, speed(rpm) and any other defects.
ASSEMBLING OF TOP COVER,BOTTOM COVER AND THE SPINDLE:
-The fan is assembled by fixing the outer body and the motor together as a single unit.
PAINTING OF THE BLADES AND THE COVERS:
-The blades and the outer case(canopies) for the motor is painted separately.
FITTING OF BLADE CARRIER
-blade carrier are fitted together with a tap and die to keep it intact.
PRESSING:
-The blades are formed by the pressing method by dies.The commonly used blade size for the household are 50"-55"
-The raw material for the blades are obtained like aluminium or plastic.The fan size ranges from 13"-99"
TESTING OF THE MOTOR SPEED:
-For the motor part, it is tested for the speed before the assembling process.
ASSEMBLING OF ROTOR AND STATOR:
-The rotor and the stator are fitted in body
-The axle is fitted and the windings,bearings, capacitor are placed.
TOOLING AND GRINDING:
-The metal used to make the stator and rotor undergoes tooling and grinding process.
PURCHASE OF OTHER REQUIRED ENTITIES
-The capacitor, bearings, down rod are purchased from other manufacturing units according to the fan size.
DESIGNING:
-Various sizes of fan can be produced by changing the sweep of the fan.The sweep or the size of a ceiling fan is the measure from end to end diameter. When you switch on the fan, the total circle that is visible is the sweep of the fan. The fan is designed by a designing team.
-Large Fans - 60" and Larger are used For rooms approximately 15' x 15' and larger
-standard fan size 49"-56" are used For rooms approximately 12' x 12' or so.
-Medium size fans 37"-48" are used For rooms approximately 10' x 10' or so.
-Small size fans 36" and smaller are used For rooms approximately 6' x 6' or so.
R&D:
-Research and Development of fan is done by a team of members on the existing techniques and thereby making new changes and introducing new,simpler,efficient concepts.
REQUIREMENTS:
-Different size of fan is manufactured for different sizes of the room and the fan sweep plays an important role in the amount of air circulated by it.
-A Survey is conducted to know the needs and requirements of the customers
Fan is very common in every place be it home,office etc
-Let us take an example of a ceiling fan, initially the electrician fits it in t
he ceiling and gives electrical supply and connection to it by connecting it wit h a switch. DISTRIBUTION: -The fan is brought from a store and the other necessary components to run it li ke the switches, connecting wires etc -The vendor receives it from a wholeseller,which in turn receives it from distri butor, large manufacturer in packed boxes. PACKAGING: -The product is packed such that the blades and the body of the fan are packed s eparately.The canopies and packed separately. QUALITY TESTING: -Before the product is packed, it is tested for the quality, speed(rpm) and any other defects. ASSEMBLING OF TOP COVER,BOTTOM COVER AND THE SPINDLE: -The fan is assembled by fixing the outer body and the motor together as a singl e unit. PAINTING OF THE BLADES AND THE COVERS: -The blades and the outer case(canopies) for the motor is painted separately. FITTING OF BLADE CARRIER -blade carrier are fitted together with a tap and die to keep it intact. PRESSING: -The blades are formed by the pressing method by dies.The commonly used blade si ze for the household are 50"-55" -The raw material for the blades are obtained like aluminium or plastic.The fan size ranges from 13"-99" TESTING OF THE MOTOR SPEED: -For the motor part, it is tested for the speed before the assembling process. ASSEMBLING OF ROTOR AND STATOR: -The rotor and the stator are fitted in body -The axle is fitted and the windings,bearings, capacitor are placed. TOOLING AND GRINDING: -The metal used to make the stator and rotor undergoes tooling and grinding proc ess. PURCHASE OF OTHER REQUIRED ENTITIES -The capacitor, bearings, down rod are purchased from other manufacturing units according to the fan size. DESIGNING: -Various sizes of fan can be produced by changing the sweep of the fan.The sweep or the size of a ceiling fan is the measure from end to end diameter. When you switch on the fan, the total circle that is visible is the sweep of the fan. The fan is designed by a designing team. -Large Fans - 60" and Larger Oversized ceiling fans 56 inches and larger For rooms approximately 15' x 15' and larger R&D: -Research and Development of fan is done by a team of members on the existing te chniques and thereby making new changes and introducing new,simpler,efficient co ncepts. REQUIREMENTS: -Different size of fan is manufactured for different sizes of the room and the f an sweep plays an important role in the amount of air circulated by it. -A Survey is conducted to know the needs and requirements of the customers Fan is very common in every place be it home,office etc -Let us take an example of a ceiling fan, initially the electrician fits it in t
he ceiling and gives electrical supply and connection to it by connecting it wit
h a switch. DISTRIBUTION: -The fan is brought from a store and the other necessary components to run it li ke the switches, connecting wires etc -The vendor receives it from a wholeseller,which in turn receives it from distri butor, large manufacturer in packed boxes. PACKAGING: -The product is packed such that the blades and the body of the fan are packed s eparately.The canopies and packed separately. QUALITY TESTING: -Before the product is packed, it is tested for the quality, speed(rpm) and any other defects. ASSEMBLING OF TOP COVER,BOTTOM COVER AND THE SPINDLE: -The fan is assembled by fixing the outer body and the motor together as a singl e unit. PAINTING OF THE BLADES AND THE COVERS: -The blades and the outer case(canopies) for the motor is painted separately. FITTING OF BLADE CARRIER -blade carrier are fitted together with a tap and die to keep it intact. PRESSING: -The blades are formed by the pressing method by dies.The commonly used blade si ze for the household are 50"-55" -The raw material for the blades are obtained like aluminium or plastic.The fan size ranges from 13"-99" TESTING OF THE MOTOR SPEED: -For the motor part, it is tested for the speed before the assembling process. ASSEMBLING OF ROTOR AND STATOR: -The rotor and the stator are fitted in body -The axle is fitted and the windings,bearings, capacitor are placed. TOOLING AND GRINDING: -The metal used to make the stator and rotor undergoes tooling and grinding proc ess. PURCHASE OF OTHER REQUIRED ENTITIES -The capacitor, bearings, down rod are purchased from other manufacturing units according to the fan size. DESIGNING: -Various sizes of fan can be produced by changing the sweep of the fan.The sweep or the size of a ceiling fan is the measure from end to end diameter. When you switch on the fan, the total circle that is visible is the sweep of the fan. The fan is designed by a designing team. -Large Fans - 60" and Larger are used For rooms approximately 15' x 15' and lar ger -standard fan size 49"-56" are used For rooms approximately 12' x 12' or so. -Medium size fans 37"-48" are used For rooms approximately 10' x 10' or so. -Small size fans 36" and smaller are used For rooms approximately 6' x 6' or so . R&D: -Research and Development of fan is done by a team of members on the existing te chniques and thereby making new changes and introducing new,simpler,efficient co ncepts. REQUIREMENTS: -Different size of fan is manufactured for different sizes of the room and the f an sweep plays an important role in the amount of air circulated by it. -A Survey is conducted to know the needs and requirements of the customers