Professional Documents
Culture Documents
instrucciones de ordenador:
Presione los dos botones de 3 - 5 segundos (el botn de ajuste y el botn de
modo), hasta que la pantalla de todos los espectculos 8.
A continuacin, pulse el botn derecho para entrar en la opcin de idioma.
Pulse el botn derecho a elegir 'ENGL', A continuacin, pulse la izquierda para
confirmar.
Pulse el botn izquierdo cuando 'set-KM' La pantalla muestra, a continuacin,
se mostrar "SET-WS ', significa ajustar la circunferencia de la rueda.
'set-ODO' En la pantalla aparece, significa que el establecimiento de la
distancia total, el nmero ms alto es de 99999, a continuacin, pulse el botn
izquierdo para confirmar.
La siguiente imagen muestra la 'SERV / IC', significa establecer la punta de la
distancia de la reparacin, el nmero mximo es de 200 a 899, la prensa de
"Modo" para aumentar el nmero y oprima hacia la izquierda para confirmar.
Ajuste final que se muestra 'BATT YSE CAMBIO', Significa que cambiar la
batera si muestra en el futuro usando.
A continuacin, pulse el botn izquierdo, se mostrar "SET-KM ', Despus de
confirmar, se muestra' SET-KG 'es el peso de las personas. La funcin es el
estndar para el clculo de consumo de caloras del ciclista. Introduzca su peso
y confirme.
La ltima funcin es ajustar la hora.
KM / Seleccin Milla
peso Marco
unidad por defecto es KG. Pulse el botn derecho para cambiar entre KG y la
libra, a continuacin, confirme con el botn izquierdo. valor de peso
predeterminado es 065KG; puede restablecerla de izquierda a derecha con el
botn derecho y confirmar con el botn izquierdo; el rango es de 020KG 199KG.
Pulse el botn izquierdo para confirmar y entrar en el modo de ajuste de
recordatorio de mantenimiento.
funcin de conmutacin
Cuando entr en el modo de configuracin, de forma continua, pulse el botn
derecho para entrar en las funciones siguientes a su vez: la distancia total, sola
bicicleta la distancia, velocidad mxima, velocidad media, el tiempo de ciclo
nico, crongrafo, el kilometraje de cuenta atrs, el tiempo de cuenta atrs, el
consumo de caloras, el consumo de grasas, la temperatura, la exploracin, el
modo de visualizacin de la hora.
Modo de crongrafo
Pulse el botn izquierdo para empezar, de nuevo para hacer una pausa, y el
botn derecho para restablecer. Rango del tiempo: 0:00:00 - 9:59:59.
En este modo, al pulsar el botn izquierdo durante 3 segundos puede bloquear
este modo, cualquier operacin de tecla no est disponible. Si necesita
desbloquear eso, pulse el botn izquierdo durante 3 segundos.
Pulse el botn derecho para entrar en el modo de cuenta atrs kilometraje.
Modo temperatura
Por defecto muestra el valor Celsius de la temperatura actual. A largo
presionando el botn izquierdo durante 3 segundos puede cambiar a
temperatura Fehrenheit, y de larga presionando de nuevo se vuelve a la
temperatura Celsius.
Pulse el botn derecho para entrar en el modo de exploracin.
Modo de exploracin
modo de escaneo automtico: la pantalla muestra los valores de la nica
distancia en bicicleta, velocidad mxima, velocidad media, el tiempo de ciclo
nico a su vez.
Presione el botn derecho para finalizar el modo de escaneo y entrar en el
modo de ajuste.
KM / Mile Selection
Press the right button to select km/h or m/h. 1mile = 1.609km.
Press the left button to confirm and enter the weight setting mode.
Weight Setting
Default unit is KG. Press the right button to switch between KG and Pound, then
confirm it by the left button. Default weight value is 065KG; you can reset it from
left to right by the right button and confirm it by the left button; the range is
020KG - 199KG.
Press the left button to confirm and enter the maintenance reminder setting
mode.
Function Switch
When entered time setting mode, continuously press the right button to enter
the following functions in turn: total distance, single cycling distance, maximum
Chronograph Mode
Press the left button to begin, again to pause, and the right button to reset.
Timing range: 0:00:00 - 9:59:59.
Under this mode, pressing the left button for 3 seconds can lock this mode, then
any key operation is not available. If you need to unlock that, press the left
button for 3 seconds again.
Press the right button to enter the countdown mileage mode.
Temperature Mode
Default displays the Celcius value of the current temperature. Long-pressing the
left button for 3 seconds can switch to Fehrenheit temperature, and Longpressing again can back to Celcius temperature.
Press the right button to enter the scanning mode.
Scanning Mode
Auto scanning mode: Screen shows the values of single cycling distance,
maximum speed, average speed, single cycling time in turn.
Press the right button to end the scanning mode and enter the time setting
mode.
Sampler Mode
Under any mode, pressing the left button can enter the Sampler Mode. Under
this mode, the bottom of screen displays the current single cycling time;
pressing the right button can browse the sampled datas of single cycling
distance, maximum speed, average speed and single cycling time. Sample
operation during cycling doesn't affect the internal counting system.
Press the left button to end the sampler mode.
Backlight
Any time pressing any button can open the backlight and the light will last for 8
seconds; for longer lighting, simultaneously press the right and left buttons for 3
seconds to open and press again for 3 seconds to end.