You are on page 1of 2

SOLUTIONS

REMOTE TELEMETRY UNIT(RTU) FOR SUBSTATION AUTOMATION


Industry

: Process/Electrical Power
Distribution

Product

: Applitech SP-50 MINI RTU

energy measurement points can be provided if


requested at the time of ordering or can be
added later.

Specifications : Provide RTU for remote


monitoring and control of
substation Switchgear Status
Application

Our RTU comprises of following features:


1. Monitor status of Circuit breakers, Isolators,
Loss of Voltage and Bus Protection in the field.
2. Command Breakers
2. Database connectivity over standard protocol
After collecting this data, it is transmitted to the
SCADA/ADMS or vice versa using GSM/GRPS
link. This is achieved using the GSM/GPRS
network of the service provider.
Hardware

Our RTU includes a microprocessor based


controller with various communication options
like, GSM/GPRS Modbus, RF Radio and leased
line. The RTU can be upgraded to have energy
measurement modules where CT/PT can be
connected
to
measure
various
energy
parameters.
Local
displays
for
energy
parameters have also been provided to validate
energy readings against standard equipment..
Generally our RTU comes standard with a PLCC
modem/GSM GPRS modem unless specified
otherwise. Using this modem, data from our
RTU can be transmitted over power lines to any
central SCADA/ADMS system.

Software

The RTU is programmed to transmit digital data


for monitoring and control of breakers. Additional

The RTU will transmit data for up to 16 digital


points. It will log the time/date stamp each time
the digital point toggles. Additional digital points
can be configured upon request. It also
maintains a time/date stamped sequence of
events for each digital point at the ADMS level.
The RTU transmits the following digital data:
1. Main/Auxiliary Bus Loss of Voltage
(LOV).
2. Main/Auxiliary Bus Protection active
(BP).
3. Main/Auxiliary Bus Circuit Breaker and
Isolator Status.
4. Transfer Bus Circuit Breaker and
Isolator Status.
5. Circuit Breaker/Isolator status for all
Incomers
6. Trip Command for all Incomers
Features

This RTU is capable for monitoring Digital as


well as Analog data with capabilities of additional
I/O expansion on special request.
RTU
supports
protocol
standards
like
Modbus,TCP/IP which are most adoptable in
Process/Power Industry.
Microprocessor based control for monitoring
status of Circuit breakers and Isolators and for
Commanding the breakers
Optional Radio, leased line or PLCC modem
communication between RTU and SCADA
master instead of data transmission over
GSM/GPRS network.

HIGHLIGHTS OF APPLITECHS ELECTRICAL

Hence our RTU delivers the most value for


money.

REMOTE TELEMETRY UNIT (RTU)

Scalable/Modular RTU design capable of


accommodating future I/O expansion
requirements.

The functionality of communication with any


Intelligent Electronic Device (IED) in the substation provided by our Electrical RTU is far
greater than most standard Electrical RTUs.

Our RTU can transmit data over a wide


range of networks like PLCC, Radio, Leased
line, Wi-Fi/GPRS and over almost all
electrical industry standard protocols.

Proven interface of RTU to standard ODBC


Such as MS SQL, MYSQL, ORACLE etc.

BLOCK DIAGRAM OF APPLITECHS ELECTRICAL RTU SYSTEM


REMOTE SUB STATION

CENTRAL SCADA LOCATION

SWITCHGEAR
STATUS

BREAKER
COMMANDS

GSM-GPRS MODEM/
LEASEDLINE/
STATIC IP BROADBAND

APPLITECH
RTU
DATA TRANSMITTED OVER
GSM/GPRS NETWORK
GSM/GPRS
MODEM

ETHERNET
SWITCH

ADMS SERVER

SCADA SERVER

You might also like