Professional Documents
Culture Documents
COMPONENTS &
ACCESSORIES
NITROUS
CONTROLLERS &
ELECTRICAL
COMPONENTS
PLATES &
THROTTLE BODIES
NOZZLES
DISTRIBUTION
BLOCKS, FITTINGS,
HOSES & TUBING
System Requirements
FUEL PUMPS,
REGULATORS
& GAUGES
To supply the carburetor and the Sportsman Fogger System in carbureted applications,
use a fuel pump designed to operate between 5 and 10 psi with a flow rate of 0.1 gallons
per hour per horsepower at 6 psi. Fuel injected applications will require a fuel pump that
flows at least 0.1 gallons per hour at system pressure. For example at 42 psi flowing, a
motor that makes 450 hp while the nitrous system is activated will require at least 45 g.p.h.
at 42 psi flowing, and going down the track. Due to the high power levels and cylinder
pressures produced by Sportsman Fogger Systems it is highly recommended that you use
high quality forged pistons and rods as well as high quality racing ignition system with timing control. If horsepower gain is more than 40% of original, forged pistons are recommended.
Recommended Optional Accessories:
Nitrous pressure gauge
(see pg 82)
Fuel Pressure gauge
(see pg 82)
Nitrous bottle heater
(see pg 64)
Progressive nitrous controller
(see pg 66)
NOS Purge Valve
(see pg 62)
43
PART # INDEX
Not legal for sale or use on pollution controlled motor vehicles in the United States.
TOOLS &
MERCHANDISING
Note: NOS sells and supports a full line of competition NOS fuel system components.
SOLENOIDS
& JETS
POWERSPORTS
SYSTEMS
(A) Available with 15 lb. bottle. Add -15 to part number. (ex. xxxx-15NOS)
(B) Available with 20 lb. bottle. Add -20 to part number. (ex. xxxx-20NOS)
(C) Available with 5 lb. bottle. Add -05 to part number. (ex. xxxx-05NOS)
Street Fogger
DIRECT PORT
SYSTEMS
SUPERCHARGER &
TURBO SYSTEMS
Description
PLATE
SYSTEMS
HIDDEN
SYSTEMS
EXTRA
HORSEPOWER
SYSTEMS
EFI WET & DRY
SYSTEMS
50-250
TECHNICAL
SPORTSMAN FOGGER