You are on page 1of 3

TUGAS I

TA4115 EVALUASI STATISTIK DALAM EKSPLORASI MINERAL


CUT LEVELS IN ENDOMINES GOLD MINING

Oleh:
FINA FITRIANA R.
12113079

PROGRAM STUDI TEKNIK PERTAMBANGAN


FAKULTAS TEKNIK PERTAMBANGAN DAN PERMINYAKAN
INSTITUT TEKNOLOGI BANDUNG
2016

Endomines Mineral Reserves and Resources Summary

*Reserves and Resources estimated according the JORC-code and Fennoscandian Review Board
recommendations (except Kuittila)

All figures independently rounded


(1) Cut-off 1,5 g/t; top cut 10-20 g/t gold; waste rock dilution 10-20%; ore loss: stoping 5%;
drifting not modelled separately
(2) Cut-off 0,5 g/t; top cut 7 g/t gold; waste rock dilution 15%; ore loss 10%
(3) Cut off 0,5 g/t; top cut 11g/t (low grade domain) or 50 g/t gold (high grade domain)
(4) Cut-off 0,5 g/t, top cut 40 g/t gold; ore loss 5 %, waste rock dilution 15%
(5) Cut-off 1,0 g/t; ore loss 5%; dilution 15%
(6) Cut-off 1,0 g/t; top cut 25 g/t gold
(7) Cut-off 1,0 g/t; top cut 30 g/t gold
(8) Cut-off 0,5 g/t; top cut 7 g/t gold
(9) Cut-off 0,5 g/t, top cut 40 g/t gold
(10) Cut-off 0,5 g/t gold; no top cut
Troy ounce = 31,1035 g.
Conclusion:
Endomines using a process to reduce the grade of the outliers to a value that is representative of the
surrounding grade distribution. From the top-cut given above, appropriate top cut applied for the
resource/reserve estimates doesnt refer to graph from Fig.21 cut levels in gold mining as a function
of mean grade. There is no more description about how to define the top cut in this company. My
hypothesis is the the top cut are influenced by many factors such as tha kind of distributionof the
gold mineralization, the kind of reserve calculation, etc.

Reference.
http://www.endomines.com/index.php/deposit

You might also like