You are on page 1of 3

Course Code : MEE2001

Pre-requisite : MEE1001
Module
1

MACHINE DRAWING

T P J

0 2 4

Topics

L Hrs

SLO

Basics of Machine Drawing: Introduction Projections Classifications of machine drawing- BIS specifications - Sectioning
Dimensioning methods: Counter Sink, Counter Bores, Spot Faces,
Chamfers, Screw Threads, Tapered Features, Title block of Industrial
drawing and Bill of Materials.
Limits and Fits: Classifications and of Fits, Selection of Fits,
Representation on Drawings, Tolerance Grade, Computations of
Tolerance, Positions of Tolerance, Fundamental of Deviations, Shaft
and Hole Terminology, Method of placing limit dimensions.
Geometrical Tolerances: Need of Geometrical Tolerance,
Geometrical Characteristics of Symbols, Indication of MMC, LMC,
Interpretation and Indication of Geometrical Tolerance and
Dimensioning.
Conventional Representations: Materials - Interrupted views and
Braking of Shaft, Pipe, Bar - Surface finishing & Machining
Symbols.
Screwed Fastenings and Joints: Screwed Fastenings - Screw
Thread Nomenclature and types, Joints: Bolts and Nuts, Key, Cotter,
Riveted, Pin, Welded joints. Pulleys and Couplings.
Contemporary Discussion
Total Lecture Hours

1,4,5

1,4,5

1,4,5

1,4,5,6,
11,17

1,4,5,6,
11,17

15
# Mode: Flipped Class Room, [Lecture to be videotaped], Use of physical and
computer models to lecture, Industrial Visit, challenging assignments, minimum
of 2 guest lectures by industry experts.
Laboratory
Laboratory: Minimum Seven exercises using CAD solid modeling software. For
each exercise, 3D part modeling, Detailing and Assembly have to be submitted.
1. 3D Modeling, assembly and detailing of joints.
2. 3D Modeling, assembly and detailing of couplings.
3. 3D Modeling, assembly and detailing of bearings.
4. 3D Modeling, assembly and detailing of valves.

30

1, 5, 6,
17

5. 3D Modeling, assembly and detailing of automotive components.


6. 3D Modeling, assembly and detailing of machine elements.
7. 3D Modeling, assembly and detailing of manufacturing components.
Project: Project work of their choice like new product design/design 60 [Non-contact
improvement of existing product. The project content should have innovation Hours]
and novelity in concepts. It is essential to apply the knowledge gained in this
course and incorporate them in the project. The project report should consists of
inidvidual part drawing, assembly drawing and final production drawing. Final
project report has to be submitted at the end the course.

Guidelines for Project:

The project will be a group project with a maximum of 3 members in a group.


The size will reflect the complexity of the project. Students should make sure
that the concepts to be studied are reflected in the project and that there is an
innovative component .

There will be a minimum of three reviews conducted in a semester and the


marks will be awarded and taken for final assessment. The marks distribution for
3 reviews will be 20:30:50.

Minimum pass marks for project is 50%. If the student fails to get 50%,
he/she has to re-register and redo in a subsequent semester.
If the student has got >= 50% in project, and fails in Theory, then the
same marks can be taken up for grading purposes after he/she completes
the Theory FAT.
Evaluation is through continuous assessment with 3 reviews. No separate
FAT.

Sample Project:

Design and drafting of double wishbone suspension system for a


passenger car.
Design of five point toggle clamp for a plastic injection molding
machine.
Design of final drive assembly for an automobiles.

1, 4, 5, 6,
11, 17,
18

Text Book
1. Bhatt, N.D. (2014), Machine Drawing , Published by R.C.Patel, Chartstar Book Stall, Anand, India.
References Books
1. Ajeet Singh (2012), Machine drawing, Tata McGraw Hill, 2nd edition.
2. Brain Griffiths (2003), Engineering Drawing for manufacture, Kogan page science,USA.
3. N.D.Junnarkar. (2004), Machine Drawing, Pearson education, 1st edition.
Mode of Evaluation
Recommended by the Board of Studies on:
Date of Approval by the Academic Council:
Compiled by

Digital Assignments /Seminars/ Surprise Test


/CAT/FAT
3.3.2016
18.3.2016
Prof. A. Ananda Babu
Prof. K. Annamalai

You might also like