Professional Documents
Culture Documents
2 - English
Important Safety Instructions
1. Read these instructions. CAN ICES-3(B)/NMB-3(B)
2. Keep these instructions. This Class B digital apparatus complies with Canadian ICES-003.
3. Heed all warnings. This device complies with FCC and Industry Canada RF radiation
4. Follow all instructions. exposure limits set forth for general population. It must not be co-
5. Do not use this apparatus near water. located or be operating in conjunction with any other antennas or
6. Clean only with a dry cloth. transmitters.
7. Do not block any ventilation openings. Install in accordance
with the manufacturers instructions. This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
8. Do not install near any heat sources, such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that (1) This device may not cause interference, and (2) this device must
produce heat. accept any interference, including interference that may cause
9. Protect the power cord from being walked on or pinched, undesired operation of the device.
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Product data logger
10. Only use attachments/accessories specified by the
manufacturer. This system features a product data logger that is designed to help
11. Unplug this apparatus during lightning storms or when unused Bose better understand product usage and performance over time.
for long periods of time. The product data logger records certain technical data and usage
12. Refer all servicing to qualified service personnel. Servicing is history, including but not limited to volume levels, on/off data, user
required when the apparatus has been damaged in any way: settings, source inputs, power output, and setup data. We may use
such as power supply cord or plug is damaged; liquid has this data to provide you with better service and support on your
been spilled or objects have fallen into the apparatus; the system and to improve product design in the future. Special equip-
apparatus has been exposed to rain or moisture, does not ment is required to read the data stored by the product data logger
operate normally, or has been dropped. and such data can only be retrieved by Bose if your system is re-
turned to Bose for service or as returned merchandise. The product
data logger does not collect any personally identifiable information
NOTE: This equipment has been tested and found to comply
about you and does not record title, genre or other information
with the limits for a Class B digital device, pursuant to Part 15 of
about the media content you access while using your system.
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, this is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, you are encouraged
to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a different circuit than the
one to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not expressly approved by Bose
Corporation could void the users authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause unde-
sired operation.
For the SoundTouch Wireless Adapter: This equipment should
be installed and operated with a minimum distance of 8 in. (20 cm)
between this device and your body.
English - 3
Important Safety Instructions
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Lead Mercury Cadmium Hexavalent Polybrominated Biphenyl Polybrominated diphenylether
Part Name (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE)
PCBs X O O O O O
Metal parts X O O O O O
Plastic parts O O O O O O
Speakers X O O O O O
Cables X O O O O O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in
SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit
requirement in SJ/T 11363-2006.
AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later.
Made for iPod, Made for iPhone, and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or
iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless performance.
AirPlay, iPad, iPhone, iPod, and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
Android and Google Play are trademarks of Google Inc.
MPEG Layer-3 audio coding technology licensed from Fraunfofer IIS and Thompson.
SoundTouch and the wireless note design are trademarks of Bose Corporation in the U.S. and other countries.
Wi-Fi is a registered mark of the Wi-Fi Alliance.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
The distinctive design of the Wave music system is a registered trademark of Bose Corporation in the U.S. and other countries.
2013 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
4 - English
Contents
Introducing SoundTouch from Bose Setting and Using the Alarms
Key benefits....................................................................................... 6 Alarm buttons and indicators................................................................ 18
Using the Alarm buttons................................................................ 18
Introduction Alarm status indicators................................................................... 18
About your Wave SoundTouch music system................................ 6
Setting the alarms.................................................................................... 18
System features............................................................................... 6
Using the alarms...................................................................................... 19
The demonstration CD..................................................................... 6
Turning an alarm on or off.............................................................. 19
The benefits of research.................................................................. 6
Snoozing an alarm........................................................................... 19
Unpacking the system............................................................................. 7
Stopping a sounding alarm............................................................ 19
Selecting a location.................................................................................. 7
Important setup options......................................................................... 7 Connecting Other Equipment
System connections................................................................................ 20
Setting up the System Using the AUX IN connector................................................................... 21
Placing the system on the pedestal..................................................... 8
Using headphones................................................................................... 21
Adding the system to your Wi-Fi network.......................................... 8
Using an external antenna..................................................................... 22
Installing the SoundTouch app................................................... 8
Connecting the system to your home Wi-Fi network................ 9 Personalizing Your Wave SoundTouch Music
Setting the clock....................................................................................... 9 System
Using the System The setup menu........................................................................................ 23
Remote control ........................................................................................ 10 Adjusting the snooze time..................................................................... 24
Touch pad................................................................................................... 10 Turning RDS on or off............................................................................... 24
Reading the display.................................................................................. 11 Selecting the continuous play source.................................................. 24
Turning the system on or off.................................................................. 11 Changing the time format...................................................................... 24
Controlling the volume........................................................................... 11 Adjusting the display brightness.......................................................... 24
Setting the Sleep timer........................................................................... 11 Setting the room code............................................................................. 25
Turning the touch pad on or off............................................................. 25
Controlling the System using the App Changing the system standby timer.................................................... 25
Using the SoundTouch app.................................................................. 12 Performing a system reset..................................................................... 25
Getting help....................................................................................... 12
Downloading the app for your mobile device.............................. 12 Advanced Features
Controlling the system from another computer........................ 12 Disabling Wi-Fi capability...................................................................... 26
Re-enabling Wi-Fi capability................................................................... 26
Personalizing your Presets Restarting the SoundTouch pedestal................................................ 26
How presets work..................................................................................... 13 Performing a factory reset of the SoundTouch pedestal................ 26
What you need to know................................................................... 13 Alternate setup method.......................................................................... 26
Playing a preset........................................................................................ 13
Setting a preset........................................................................................ 13 Care and Maintenance
To set a preset................................................................................... 13 Troubleshooting....................................................................................... 27
To change a preset........................................................................... 13 Replacing the remote control battery.................................................. 28
Cleaning...................................................................................................... 28
Listening to other Sources Customer service...................................................................................... 28
Playing an AirPlay stream from an AirPlay compatible device........ 14 Limited warranty...................................................................................... 28
Listening to radio..................................................................................... 14 Technical information.............................................................................. 28
Selecting the radio band................................................................. 14
Viewing station information.......................................................... 14 Index
Tuning to an FM/AM station.......................................................... 14
Storing FM/AM radio station presets........................................... 14
TALK RADIO mode............................................................................ 15
Improving FM reception.................................................................. 15
Playing CDs................................................................................................ 15
Playing audio CDs............................................................................. 15
Playing MP3 CDs............................................................................... 16
English - 5
Introducing SoundTouch from Bose
With SoundTouch, you can stream Internet radio, music services,
and your music library. If you have Wi-Fi at home, youre ready to
About your Wave SoundTouch
enjoy your favorite music in any room you want. music system
Key benefits Your Wave SoundTouch music system provides an elegant way
to bring high quality sound wirelessly into any room. With the
Enjoy wireless access to Internet radio, music services and your addition of the SoundTouch pedestal to the Wave music system,
music library. you can listen to Wi-Fi music at the touch of a button. Use the free
Stream your favorite music easily with personalized presets. SoundTouch app to set up and control your system.
See Adding the system to your Wi-Fi network on page 8.
Works with your existing home Wi-Fi network.
Free SoundTouch app for your computer, smartphone, or tablet System features
provides more powerful control.
Lifelike, room-filling sound from a compact system that can play
Simply add additional systems at any time for a multi-room all of your music.
listening experience.
Enjoy all your music sources at the touch of a button: Internet
Wide selection of Bose audio systems lets your choose the right radio, your music library, DAB/FM/AM radio, and CDs.
solution for any room.
Stream your music via AirPlay from your iPhone, iPad, iPod
devices
AUX connector enables playback from an external media player
An Ethernet connector enables wired access to your home net-
work.
USB connectors for network setup.*
Free SoundTouch app for system setup and control
*The USB connectors on the back of the system (SETUP A and SETUP B)
are for setup only. The connectors are not designed to charge smartphones,
tablets, or similar devices.
The demonstration CD
We encourage you to listen to the
demonstration music CD included
in the carton. Simply insert the
demonstration disc and your Wave
SoundTouch music system will play
the CD automatically.
6 - English
Introduction
Unpacking the system Important setup options
Please check the shipping carton for the following items. Before you can enjoy listening to SoundTouch you must down-
load and run the SoundTouch app on a computer to connect the
Note: Do not connect any cables to the system until after you
launch the SoundTouch app. See Adding the system to system to your network.
your Wi-Fi network on page 8. Tip: If you want SoundTouch to play your iTunes or Windows
Media Player music library, use the computer where your
music library is stored.
AC power cord(s)
(The appropriate cord for
your region is provided)
Selecting a location
To enjoy maximum audio performance, place your Wave
SoundTouch music system across the room from where you will
be listening.
Be sure to place the system on a flat, stable surface.
For best audio performance, place the system within two feet of
a wall, and avoid placing directly in a corner.
CAUTIONS:
Do not place your Wave SoundTouch music system on a metal
surface. It could interfere with AM reception.
Do not place your Wave SoundTouch music system on a heat-
sensitive surface. Like all electrical equipment, it generates some
heat.
Do not use your Wave SoundTouch music system in a damp
location or any other place where moisture can get inside.
English - 7
Setting up the System
Placing the system on the pedestal Adding the system to your Wi-Fi network
The SoundTouch pedestal provides the network connection for Before you can use SoundTouch you must install the
the Wave music system. SoundTouch app on a computer that is on your home network.
Next, you will use the app to connect the Wave SoundTouch
Note: Before you start setting up this system, be sure to read
Important setup options on page 7. music system to the network. The app guides you through the
setup process.
1. Place the SoundTouch pedestal on a flat, stable surface. Make sure you follow the instructions on your computer.
2. Carefully set your Wave music system on top of the
Note: If you have already set up SoundTouch for another
SoundTouch pedestal. system, just launch the app and click
Make sure the rear feet of the Wave music system fit into Explore > Settings > Systems > Add System
the recesses on top of the SoundTouch pedestal. to add another system.
Make sure the Wave music system sits flat and the side
edges of both units are aligned. Installing the SoundTouch app
1. From a computer that is on your Wi-Fi network, open a
browser and go to:
http://www.Bose.com/soundtouch_app
Tip: If you want SoundTouch to play your iTunes or
Windows Media Player music library, use the
SoundTouch computer where your music library is stored.
pedestal
8 - English
Setting up the System
Connecting the system to your home Setting the clock
Wi-Fi network
After plugging in your Wave SoundTouch music system, it is eas-
1. Make sure you have set up your system by following the steps ily operated using the remote control. Just aim the remote at the
in Placing the system on the pedestal on page 8. front panel and press the buttons.
2. Launch the app by double-clicking the SoundTouch icon. To set the clock:
The first time the app launches, it guides you through setting 1. Press and hold either Time or Time + for about one second.
up the system on your Wi-Fi network.
The app instructs you to connect the system.
3. When prompted by the app, connect your system to power:
A. Insert the small plug on the power cord into the AC Power
connector.
B. Plug the other end into an AC (mains) power outlet.
B
A
2. Release the selected Time button.
3. Press Time to adjust the displayed time backward or press
4. When prompted by the app, plug the small end of the USB Time + to adjust the displayed time forward until it matches
cable into the SETUP A connector on the SoundTouch the current time. You can also press and hold for rapid
pedestal. adjustment.
4. Wait five seconds for the system to exit the clock setup mode
automatically.
Note: To change the clock display from 12-hour (AM/PM)
time to 24-hour time, see Changing the time format on
page 24.
USB cable
SETUP A (provided)
5. Plug the other end of the USB cable into a USB port on your
computer.
6. Follow the instructions on your computer to complete setup,
including creating a SoundTouch account, locating your
music library, signing in to music services, exploring music,
and personalizing your presets.
English - 9
Using the System
Remote control
Your Wave SoundTouch music system is easily operated using
Note: Pressing , , or automatically turns on the
the remote control. Just aim the remote at the display and press
the buttons. The remote normally works within 20 feet of the dis-
Wave SoundTouch music system to the selected source.
play.
Note: Press-and-hold operations require holding the button down
for about one second.
Touch pad
Your Wave SoundTouch music system has a touch-sensitive
control under the top, front, center area of the top panel.
Momentarily placing your hand on the touch pad can turn your
Wave SoundTouch music system on or off (page 11), snooze a
sounding alarm, and reset it for the next day (page 19).
10 - English
Using the System
Reading the display Controlling the volume
Press and hold or to adjust the volume level.
Source indicators: CD, FM, AM, or AUX, and VOLUME - 0 (silent) to 99 (loud) appears on the display to
none for SoundTouch
indicate the level.
Play mode Clock Alarm status
English - 11
Controlling the System using the App
Using the SoundTouch app Controlling the system from another
computer
The SoundTouch app is a software application that enables you to
control SoundTouch from your computer, smartphone, or tablet. Once you set up the SoundTouch system on your home Wi-Fi
Using the app, your smart device acts as a rich remote for the network, you can control the system from any computer on the
SoundTouch source. same network.
The app enables you to manage your SoundTouch settings, 1. On the computer where you want to control the system,
explore local and global Internet radio stations, set and change open a browser and go to:
presets, stream music to the system, view what is playing, plus http://www.Bose.com/soundtouch_app
much more.
2. Download, install and launch the SoundTouch app.
After you set up the system on your network using the
SoundTouch app, you are ready to explore streaming music The sign-in screen appears.
and personalize your presets. You are ready to sign in to your SoundTouch account.
Getting help
If you need more information on using the system, use Help Tips or
Online help.
Help Tips
After setup is complete helpful tips appear on the screen, based on
the task you are trying to complete. These tips instruct you how to
use the system, including how to personalize your presets.
Online help
For information about using SoundTouch:
1. Click Explore > Help in the app.
2. Browse through the help topics.
12 - English
Personalizing your Presets
How presets work Setting a preset
You can personalize six presets to your favorite streaming music This section describes how to set and change a preset from the
services, stations, playlists, artists, albums or songs from your remote control.
music library. You can access your music at any time with a simple Note: For information on using the SoundTouch app to set and
touch of a button on the Wave SoundTouch system remote
change your presets, refer to the Help system in the app.
control.
Tip: You can also access your presets using the SoundTouch
app on your computer, smartphone, or tablet (see page To set a preset
12). 1. Stream music to the system using the app.
2. While the music is playing, press and hold a
What you need to know preset on the remote (about 2 seconds). The
system emits a tone when the preset is set.
You can set presets from the app and the Wave SoundTouch
system remote control.
To change a preset
If the preset source is your iTunes or Windows Media Player
music library, ensure the computer storing your music library Follow the instructions in To set a preset.
is on and connected to the same network as the Wave
SoundTouch system.
You cannot set presets from an AirPlay stream or audio device
connected to AUX.
Playing a preset
Once you personalize your presets using the app, press on
the remote.
SOUNDTOUCH is displayed until content being streamed through
the SoundTouch pedestal is available.
Note: When you turn on the system for the first time and select
SoundTouch, content will not be available for several
seconds. After that, it will be much faster.
To skip forward or back through tracks, press (or press and hold)
Seek/Track forward or backward .
English - 13
Listening to other Sources
Playing an AirPlay stream from an AirPlay Tuning to an FM/AM station
compatible device When you press Radio, Seek/Track, or Tune/MP3 to tune to a
radio station, the frequency appears in the center of the display
After connecting the Wave SoundTouch music system to your while you are tuning.
Wi-Fi network, it is ready to stream audio from an AirPlay device
on the same Wi-Fi network.
1. Start a music app on your AirPlay device.
2. On the device, tap or click and select the SoundTouch Station frequency
system name assigned during setup. while tuning
Tip: Adjust the volume on the device to 75 percent of maximum
to ensure optimal volume control from the system. Press Seek/Track to find a lower-frequency
station with a strong signal;
3. Start playing music from the music app. Press Seek/Track to find a higher-frequen-
AIRPLAY appears on the display followed by information on cy station with a strong signal.
content playing.
Press Tune/MP3 < to manually tune to a lower
frequency.
Press Tune/MP3 > to manually tune to a higher
frequency.
Press and hold Tune/MP3 < to rapidly lower
the frequency.
Listening to radio Press and hold Tune/MP3 > to rapidly increase
the frequency.
Selecting the radio band
Press Radio to turn on the radio to the station last Note: If AM reception is weak, rotate your Wave SoundTouch
selected. Press Radio as necessary to select FM or AM. music system clockwise or counterclockwise to improve
AM reception. If FM reception is weak, make sure the power
Viewing station information cord is straightened as much as possible. To improve FM
reception, you can install an external FM antenna. See
When you select FM radio, Radio Data System (RDS) information
Using an external antenna on page 22.
for the current station is displayed. This is controlled by the RADIO
TEXT setting in the setup menu. To disable RDS and view only the
station frequency, change the RADIO TEXT setting to OFF. See Storing FM/AM radio station presets
Turning RDS on or off on page 24.
You can store up to six FM and six AM radio stations
RDS information displayed (RADIO TEXT- ON): for quick recall using the Presets buttons.
1. Tune to the station you want to save as a preset.
RDS information 2. Press and hold a preset button until you hear a double tone
and the preset number and station frequency appear on the
display.
3. Press a preset button quickly tune to a previously stored FM or
No RDS information displayed (RADIO TEXT- OFF): AM station.
Note: Storing a preset will replace any station previously stored to
that preset number.
Station
frequency
14 - English
Listening to other Sources
TALK RADIO mode Playing CDs
Talk radio broadcasts can be greatly affected by either the
microphone selection or the boosting of low frequencies by some Playing audio CDs
radio stations. They do so in an attempt to improve speech when
heard through conventional radios. In high-quality audio products, Insert the disc, label side up, into the CD slot below the display.
this results in sound that is unnatural or bass heavy. By selecting The disc player will automatically pull the disc in and begin playing.
the TALK RADIO mode, your Wave SoundTouch music system
automatically adjusts to compensate for artificially boosted low
frequencies.
When the radio is playing, press Play Mode twice to turn
the TALK RADIO mode on (TALK RADIO ON) or
off (TALK RADIO OFF).
Note: The TALK RADIO setting is automatically cancelled when
you tune to another station, switch to another source, or
turn your Wave SoundTouch music system off.
Press if the CD source is not selected.
English - 15
Listening to other Sources
Press Play/Pause to pause a playing CD. The Playing MP3 CDs
elapsed time flashes while paused. Press Play/ Your Wave SoundTouch music system can play MP3 music files
Pause again to resume play. recorded on CD-R and CD-RW discs. You can easily navigate
Press Seek/Track to skip to the beginning through your music files using the Tune/MP3 and Seek/Track
of the current track; Press Seek/Track remote control buttons.
again to skip to the beginning of the previous Note: MP3 is a music compression technology that reduces a
track. songs file size without noticeable effect in the quality of the
Press Seek/Track to skip to the next track. sound. Through compression algorithms, the MP3 format
makes it easy for you to store many times the number of
Press and hold Tune/MP3 < to scan backward songs you would find on a conventional audio CD. In fact,
quickly through a track. an MP3 CD can contain as much music as ten standard
Press Tune/MP3 > to scan forward quickly audio CDs on just one disc, which can then be organized
through a track. into folders on a PC before being stored on the disc.
Press Stop/Eject to stop a CD. Press Stop/ Music files on an MP3 CD are played according to the folder
Eject again to eject a CD. structure on the disc.
If a CD is playing, press-and-hold Stop/Eject For example:
to stop a CD and eject it.
Folders on CD: Play order:
Folder 00 Track1
Note: When you play a stopped CD it will always resume from the Root level
Track 2
place it was stopped. Folder 1 .
.
Note: If you eject a CD but do not remove it from the CD player .
slot within 10 seconds, the CD player will pull the CD back Track 8
into the player and reload it. Folder 2
Folder 01 Track1
Track 2
CAUTION: DO NOT INSERT mini CDs or non-circular CDs into the .
Folder 3 .
disc player. These discs may not play properly and could interfere
with the systems ability to eject them. .
Track 8
16 - English
Listening to other Sources
Navigating through music files
Press Tune/MP3 < to skip to the previous
folder; press Tune/MP3 > to skip to the next
folder.
Press Seek/Track to skip to the beginning
of the current track; Press Seek/Track
again to skip to the beginning of the previous
track.
Press Seek/Track to skip to the next track.
When navigating an MP3 CD, folder number and track number are
displayed:
Once the track begins playing, artist name, song title, and elapsed
track time will return to the display:
English - 17
Setting and Using the Alarms
Alarm buttons and indicators Setting the alarms
The Wave SoundTouch music system has two independent You can choose the settings for each alarm by activating the Alarm
alarms, Alarm 1 and Alarm 2. Setup mode and displaying the settings for the alarm you want to
change.
Each alarm can be set for:
To setup Alarm 1 or 2:
Time
1. Press Alarm Setup to activate the Alarm Setup mode.
Wake-up source: buzzer, radio, or CD
Volume First, the alarm number and time start flashing (A).
Using the Alarm buttons After a moment, the current settings for Alarm 1 are
displayed (B).
Using the Alarm buttons on the bottom of the remote you can
setup and operate each alarm: A
Press to turn
Alarm 1 on or off.
1. Press to activate the Alarm Setup
mode and view Alarm 1 settings.
2. Press again to view Alarm 2 settings. B
AM
Note: You cannot select AUX or SoundTouch as the wake-up
PM source.
The alarm you set is turned on and the alarm time appears on
the display:
18 - English
Setting and Using the Alarms
Using the alarms
Turning an alarm on or off
Press or to turn the selected alarm on or off.
When an alarm is turned on, the alarm number and time appear in
the upper right corner of the display.
Alarm number
and time
Snoozing an alarm
To snooze a sounding alarm:
Touch the touch pad,
or press .
English - 19
Connecting Other Equipment
System connections
The connector panel of the Wave SoundTouch music system provides connections for external equipment.
4
3
2
1
11
10
9
8
7
6
5
1 FM 75 ANTENNA
3.5 mm FM antenna connector. See Using an external antenna on page 22.
2 Bose link
Input connector for the SoundTouch pedestal.
3 AUX IN
3.5 mm stereo input connector for external sources. See Using the AUX IN connector on page 21.
4 HEADPHONES
A 3.5 mm stereo headphone connector. See Using headphones on page 21.
5 Control button
Disables the Wi-Fi capability (page 26), initiates the alternate setup method (page 26), or restarts the S
oundTouch pedes-
tal (page 26).
6 Wi-Fi indicator:
Blinking white Connecting to Wi-Fi network
Solid white (dim) System off and connected to Wi-Fi network
Solid white (bright) System on and connected to Wi-Fi network
Blinking amber Disconnected from Wi-Fi network
Solid amber System is in setup mode
Off Wi-Fi networking disabled or system is connected to Ethernet
7 Ethernet connector
Used for a wired network connection.
8 SETUP A
A USB Micro-B connector used for connecting to a computer for performing system setup.
9 SETUP B
A USB Standard A connector reserved for future use.
10 SERVICE
Used for special service functions. Not for customer use.
20 - English
Connecting Other Equipment
Using the AUX IN connector Using headphones
When using a TV, DVD player, computer, video game or other audio For private listening, plug the headphones into the headphone
source, you can enhance your listening experience by playing the connector on the rear panel of the Wave SoundTouch music
audio device through your Wave SoundTouch music system. system.
Connecting an audio device to your Wave SoundTouch music Note: The system speakers are automatically muted when you
system requires one of the following cables: plug in your headphones.
AUX IN
English - 21
Connecting Other Equipment
Using an external antenna
The Wave SoundTouch music system power cord is used as an
antenna for FM radio. If, after adjusting the position of the power
cord, you still experience poor reception, you may need to install
an external antenna. An external dipole antenna can be ordered
through Bose Customer Service. See the phone numbers listed
inside the back cover of this guide.
1. Insert the 3.5 mm plug of the FM antenna into the
FM ANTENNA connector.
2. Extend the ends of the antenna as far from the unit and
other external equipment as possible to establish optimum
reception.
FM antenna
connector
22 - English
Personalizing Your Wave SoundTouch Music System
System settings were selected at the factory to satisfy most owners of a Wave SoundTouch music system.
However, if you wish to adjust the system settings, see the the instructions on the following pages.
Factory
System Setting Menu Item Setting Choices Description
Snooze Duration SNOOZE- 10 MIN 10 MIN, 20 MIN, Determines the snooze time duration.
30 MIN, 40 MIN,
50 MIN, 60 MIN
Radio Data System (RDS) RADIO TEXT- ON ON, OFF Enables (ON) or disables (OFF) the system to display RDS
Information information.
Continuous Play CONT PLAY- NO NO, AUX, FM, AM Determines which source will automatically play after a CD
ends.
Clock Time Format TIME- 12 HOUR 12-HOUR, Sets the clock display for 12-hour (AM/PM) or 24-hour time.
24-HOUR
Display High Brightness BRIGHT HI- 10 8-15 Sets the display brightness level when the unit detects high
Level ambient light conditions.
Display Low Brightness BRIGHT LO- 4 1-8 Sets the display brightness level when the unit detects low
Level ambient light conditions.
Room Code ROOM- B___ B _ _ _ , C _ _ _, Sets the room code for the Wave SoundTouch music
(Not applicable when using D _ _ , E _ _ _, system when it is connected to a Bose link network.
the SoundTouch pedes- F _ _ , G _ _, The dashes following the room letter indicate how the
tal.) H _ , I _ _ _, microswitches should be set on a Lifestyle remote control.
J _ _ , K _ _,
L _ , M _ _,
N _ , O _
Capacitive touch control TOUCH PAD- ON ON, OFF Enables (ON) or disables (OFF) the touch pad.
20-minute system standby AUTO OFF- YES YES, NO Enables (YES) or disables (NO) the 20-minute system
timer standby timer. Refer to Turning the system on or off on
page 11.
System Reset RESET ALL- NO NO, YES Restores the Wave SoundTouch music system to factory
settings.
English - 23
Personalizing Your Wave SoundTouch Music System
Adjusting the snooze time Changing the time format
This setting determines the duration of time the system remains You can choose to have the display show the time in
silent when the snooze function is activated. 12-hour (AM/PM) or 24-hour time.
1. Press and hold until -SETUP MENU- is displayed. 1. Press and hold until -SETUP MENU- is displayed.
2. Press repeatedly until SNOOZE- 10 MIN is displayed. 2. Press repeatedly until TIME- is displayed.
10-60 minutes (in 10-minute increments). 4. Press to exit the setup menu or wait 10 seconds for the
4. Press to exit the setup menu or wait 10 seconds for the setup menu to exit automatically.
Selecting the continuous play source 5. Press to set the low display brightness level
The Wave SoundTouch music system has a continuous play from 1-8.
feature. When a CD stops playing, you can program another source
to automatically start playing.
6. Press to exit the setup menu or wait 10 seconds for the
1. Press and hold until -SETUP MENU- is displayed. setup menu to exit automatically.
24 - English
Personalizing Your Wave SoundTouch Music System
Setting the room code Performing a system reset
Note: This setting is not applicable when using the SoundTouch If you wish, you can restore your Wave SoundTouch music
pedestal. system to the original factory settings.
Note: This reset function erases all FM and AM presets. It does
The Wave music system comes from the factory ready to operate
not affect your SoundTouch presets or your saved network
as a second room (room code B) when connected to a Bose link
credentials.
enabled Lifestyle system. If you want to use your Wave music
system with your Lifestyle system beyond a second room you will
need to change the room code to match that of the remote control 1. Press and hold until -SETUP MENU- is displayed.
you are using for that room.
Refer to your Lifestyle system owners guide for more information 2. Press repeatedly until RESET ALL- NO is displayed.
on room codes.
1. Press and hold until -SETUP MENU- is displayed. 3. Press to change RESET ALL- NO
The dashes following the room letter indicate how the 4. When PRESS PRESET 3 TO CONFIRM is displayed,
microswitches should be set on the Lifestyle remote control.
press Presets .
3. Press to select a room code other than room B. When the reset is complete, RESET COMPLETE is displayed.
English - 25
Advanced Features
Disabling Wi-Fi capability Alternate setup method
The SoundTouch pedestal has built-in Wi-Fi capability that Using this method you can set up your Wave SoundTouch music
nables wireless connectivity and AirPlay.
e system by first joining its own built-in Wi-Fi network, and then con-
necting to your home Wi-Fi network.
1. Press and hold the Control button on the back of the
SoundTouch pedestal for 6-10 seconds. Note: You may use this method to set up your system as an
AirPlay device only. To access the benefits of SoundTouch,
2. When the Wi-Fi indicator turns off, release the Control button.
such as streaming Internet radio and your music services,
you must finish setup using the SoundTouch app (see page
Re-enabling Wi-Fi capability 9).
To enable Wi-Fi, turn on the Wave SoundTouch music system 1. On the Wave SoundTouch music system remote, press the
again using the remote control. Power button to turn on the system.
2. On the back of the SoundTouch pedestal, press and hold
Restarting the SoundTouch pedestal the Control button for 2-6 seconds. When the amber Wi-Fi
indicator blinks, release the Control button. The Wi-Fi indicator
On the back of the SoundTouch pedestal, press and hold the should be solid amber.
Control button for more than 10 seconds and then release it. After
several seconds the pedestal should turn on again and reconnect 3. On your computer, tablet, or smartphone, activate Wi-Fi and
with your network. join the Bose SoundTouch Wi-Fi Network.
Note: Restarting does not affect your SoundTouch presets or 4. Open a browser and type: http://192.168.1.1 in the address
your saved network credentials. field.
The Wi-Fi setup window appears on the screen.
Performing a factory reset of the 5. Select your home Wi-Fi network from the drop-down list.
SoundTouch pedestal 6. Enter your password (if required) and tap or click Connect.
The system attempts to connect to your home Wi-Fi network.
Factory reset of the SoundTouch pedestal clears all SoundTouch
source information and network credentials from the system and The SoundTouch pedestal Wi-Fi indicator temporarily blinks
returns it to original factory settings. white and turns solid white when connected to the network.
Note: This reset function erases your SoundTouch presets and Note: It may take a minute or two for the Wi-Fi indicator to turn
saved network credentials. It does not affect your FM and from solid amber to white.
AM presets.
7. On your computer, tablet or smartphone, return to the Wi-Fi
1. Ensure that the SoundTouch pedestal cable is inserted into control panel and rejoin your home Wi-Fi network.
the Bose link connector. 8. Once the system is on the network, follow these steps to
2. Disconnect the system from power. complete setup:
3. Press and hold the Control button on the back of the A. Download and launch the SoundTouch app.
SoundTouch pedestal. B. On the SOUNDTOUCH SYSTEM SETUP screen, select
4. While pressing and holding the Control button, reconnect this option:
power. IT IS ALREADY CONNECTED.
5. Hold the Control button for five seconds and then release it. Note: For more information on setup, see Installing the Sound-
The system restarts. Touch app on page 8.
6. Launch the SoundTouch app on your computer and add the
system to your network (see page 8).
26 - English
Care and Maintenance
Troubleshooting
Problem What to do
System does not function Make sure the power cord is fully plugged into a live AC (mains) power outlet.
Unplug the power cord from the AC wall outlet for 10 seconds and then reconnect it; this will reset the
system.
Tap the touch pad on the top of the system to see if the system turns on (page 11).
Unable to complete Ensure the SoundTouch pedestal is plugged into the Bose link connector and power is on.
SoundTouch setup Ensure network name and password are correct.
Ensure network service is available and that the Wave SoundTouch music system and computer are on
the same network.
Move the Wave SoundTouch music system closer to the wireless router.
Stop other audio or video streaming on your network.
Close the SoundTouch app, disconnect the USB cable and restart the setup process. Refer to Adding
the system to your Wi-Fi network on page 8.
Intermittent or no audio from Move the Wave SoundTouch music system away from possible interference, such as microwave ovens
SoundTouch or cordless phones.
Stop other audio or video streaming on your network.
Ensure the SoundTouch pedestal is plugged into the Bose link connector and connected to the same
network as the computer.
Ensure the system volume is not muted or too low.
Unplug the power cord; reconnect after one minute.
Unable to hear AirPlay Ensure the system and AirPlay device are connected to the same network.
Ensure the AirPlay device is playing; increase its volume.
On the AirPlay device, check that the Wave system is selected as the output speaker.
Move AirPlay device away from possible interference and closer to the wireless router or access point.
Note: Proximity of the AirPlay device to the system is not important, only to the wireless router or access
point.
No sound Turn the volume up.
Press the Mute button .
Eject the CD and reload it.
Press to listen to SoundTouch.
Make sure the SoundTouch pedestal is connected to your Wi-Fi network.
Press to listen to an external source connected to the AUX IN.
Make sure the external source is turned on and the volume on the external source is turned up.
Disconnect headphones from the system (connecting headphones mutes the speakers).
Poor sound quality If listening to an AM or FM source, try turning the Talk Radio mode on or off (page 15).
If listening to an external AUX source, make sure you are using a stereo cable and that it is fully inserted.
Remote control is Operate the remote control closer to the unit.
inconsistent or does Check that the remote control battery is installed with positive (+) polarity facing up.
not work Replace the remote control battery.
Check for interference from fluorescent room lighting, sunlight, or dust or dirt on lens.
Try the unit in a different location.
AM reception is weak Turn the system slightly one way and then the other to change the direction of the internal AM antenna.
Move the unit farther from a TV, refrigerator, halogen lamps, dimmer switches, or other electronic
equipment that generates electrical noise.
If neither suggestion works, you may be in an area of weak AM signal coverage.
FM reception is weak Extend the power cord as much as possible. The power cord acts as an FM antenna. See page 15.
See Using an external antenna on page 22.
CD does not play Check that the CD source is selected or press CD. The CD icon should appear on the display.
Check that the CD was loaded label-side up.
Check that the disc surface is clean, If not, try cleaning it.
Check that an audio CD was loaded, not a DVD.
Try another disc.
English - 27
Care and Maintenance
Replacing the remote control battery Cleaning
Use only a soft dry cloth to clean your Wave SoundTouch music
WARNING: Keep the remote control battery away from children. It
system. If necessary, you may use a soft-bristled attachment to
may cause a fire or chemical burn if mishandled. Do not recharge,
gently vacuum the front of the enclosure. Do not use any liquid
disassemble, heat above 212F (100C), or incinerate. Dispose of a
cleaning solutions, solvents, chemicals, alcohol, ammonia, or
used battery promptly. Replace only with a battery of the correct type
abrasives.
and model number.
Do not allow liquids to spill into any openings in the enclosure. If
CAUTION: Danger of explosion if battery is incorrectly replaced. liquids get into the unit, unplug the product immediately. Call Bose
Replace only with an agency-approved (e.g. UL) CR2032 or Customer Support as soon as possible to arrange for service. See
DL2032 3-volt lithium battery. the list of phone numbers inside the back cover.
Limited warranty
e us s of
ed
to b pe
batt tions rating
ery for ty
uc pe
nstr e o
Technical information
e use s of
d
to b pe
batt tions rating
ery for ty
ruc pe
inst See o
AC power rating
120V 50/60Hz 60W max.
Dimensions
14.6 W x 8.6 D x 5.6 H (36.8 cm x 21.9 cm x 14.3 cm)
WARNING: Do not ingest battery, chemical burn hazard. The remote
Weight
control supplied with this product contains a coin/button cell battery.
If the coin/button cell battery is swallowed it can cause severe internal 9.9 lb (4.5 kg)
burns in just two hours and can lead to death. Keep new and used
batteries away from children. If the battery compartment does not
close securely, stop using the product and keep it away from children.
If you think the battery may have been swallowed or placed inside any
part of the body seek immediate medical attention.
3. Remove the old battery and install the new one with the plus
(+) symbol facing up.
e use of
to b types
d
bat ions ating
tery for
ruct per
inst See o
28 - English
Index
A E
acoustic waveguide 6 electrical noise sources 27
AC power 9 electrical outlet 9
AC power rating 28 enhanced sound from audio devices 21
AirPlay audio 14 external antennas 20
alarms 18, 19 external sources, connecting 20
alarm wake-up source 18 external sources, using 21
AM antenna, internal 27
ambient light conditions 23, 24 F
AM/PM (12-hour) time 9, 23, 24 factory settings 23, 25
AM radio 14 FM antenna 15
AM reception 14 FM radio 14
antennas, external 14, 20 FM reception 15
artist name 17 frequency display, radio 14
audio CD 15
audio device, connecting 21
H
AUX IN connector 20, 21 help, troubleshooting 27
B I
battery replacement 27 internal AM antenna 27
Bose link 20, 23, 25 L
brightness level 23, 24
Lifestyle system 23, 25
C limited warranty 28
carton contents 7 listening level, headphones 21
CD, MP3 types of 16 location, selecting 7
CD player 15 M
CD play mode 16, 17
MP3 CDs 16
CD source 10, 15
music files, navigating 17
CD source information 15
changing system settings 23 P
clock display 9, 11 personalizing the system 23
clock setup 9 play mode 16, 17
clock time 9 poor reception 14, 22
clock time format 9, 23, 24 power connection 9
computer 7, 8, 12, 13 power cord 9
connecting to network 9 power outage 9
connection panel 20 power saving mode 26
continuous play 23, 24 preset number 10, 14
controlling SoundTouch 12 presets, quick recall 10, 13, 14
customizing operation 23 presets, SoundTouch 13
D presets, storing radio 14
press and hold operation 10
demonstration CD 6
dimensions 28 Q
dipole antenna, external 22 quick recall, presets 14
display 11
display brightness 23, 24
downloading the SoundTouch app 8, 12
English - 29
Index
R U
radio alarm 18 unpacking the carton 7
radio data system (RDS) 14, 23, 24 using SoundTouch 7
radio station 14
RDS 14, 23, 24 V
rear panel 20 volume level 10, 11
recall presets 10
remote control 10
W
remote control battery 28 waveguide speaker technology 6
reset, wireless adapter 25 weak radio reception 14, 22
room code 23, 25 wireless adapter reset 25
S
scan through a track 16
setting alarms 18
setup menu 23
shipping carton 7
sleep timer 11
snooze control 19
snooze time 19
song title 17
sounding alarm 19
SoundTouch app 12
SoundTouch app installation 8
SoundTouch app URL 8
SoundTouch help 12
SoundTouch pedestal setup 8
SoundTouch presets 13
SoundTouch sources 12, 13
station frequency 14
stereo cables 21
stereo headphones connector 20, 21
stereo input connector 20
stopping an alarm 19
storing a radio preset 20
system operation 10
system reset 23, 25
system settings 23
system standby timer 11, 23, 25
T
talk radio broadcasts 15
TALK RADIO mode 15
technical information 28
touch pad 10
touch pad control 23
touch sensitive control 10
troubleshooting tips 27
tuning AM/FM radio 14
turning alarm on or off 19
turning the system on or off 11
TV, connecting to a 21
30 - English
2013 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM370769 Rev. 01