You are on page 1of 5

MD AFZAL ALAM

Mobile : +91 7903950340


E-mail : Afzal.alam786786@gmail.com

Targeting Wellhead Operator/Field

Profile Skill Set


Summary
Highly motivated, enthusiastic, and skilled Professional with Operations and
over 8 years experience in Production Operation, Pre- maintenance
Commissioning, Commissioning and Maintenance of Oil & Gas
Pre- Commissioning
Plants in Middle East. To obtain a position that will enable me to
and Commissioning
use my strong organizational, educational, and technical skills,
to work well with Hydrocarbon process industry. Expertise in Testing and Inspectio
normal Operation, Start-up, Trouble Shooting, Shutdown
Operation and Maintains of Oil and Gas plant and well head Communication Skill
platforms. Conversant with latest Fire and Gas safety IT Skills
procedures and safe handling of equipments.
Safety- Process and
During my overseas assignment I had the opportunity to work Functional
with a large number of nationalities. This has increased my
interpersonal qualities coupled with my strong work ethic, has
enhanced my confidence to undertake team oriented and
individual assignments. I will not be intimidated by deadlines or
unexpected situations.

Work Experience
1. Company : Sohar rifinary (orpic)
Period : 14aprl. 2014 13Nov. 2016
Designation : Wellhead operator/Production operator
Responsibilities:
Daily inspections at each well head including recording flow rates, pressures an
temperature data, checking fluid levels, the electrical generator, the hydraul
system, safety valves and produce daily reports from the data collected. Report an
maintenance requirements.
Conduct specific assignments related to operating equipment and systems (such a
test separators, gas traps, gas skids, safety cabinets, manifolds, chokes, p

Afzal alam Page 1


receivers and launchers) under direct instructions.
Maintain surface equipment at the Wellhead, including checking hydraulic level
testing safety valves, inspecting for gas leaks, and taking appropriate action
rectify this.
Carries out well head sampling according to prescribed programs and observ
service companies carrying out such work. Return samples, where necessary,
Laboratory for analysis and testing.
Prepares the wellhead towers and sub-sea pipelines for maintenance as per th
established procedures when required, accompanies th
Instrument/Mechanical/Electrical Technicians to explain defects/defaults ensurin
safe preparation of equipment for routine planned maintenance, and test suc
repaired equipment to ensure smooth and efficient operation.
Informs Supervisor for the replenishment of stores stock items/chemicals necessa
for operating the wellhead tower and sub-sea pipelines, checks consignments an
endorses loading/delivery notes.
Assists as required the wireline and logging jobs of service companies on the we
head platforms.
Ensures that all activities are carried out with due regard to the companys safe
regulations and good housekeeping practices.
Prepares and performs well flow testing operations in accordance with programme
prepared by WHP Supervisor Record and report wellhead operating data to provide
history of flow characteristics.
Operates and maintain chemical injection and drain system, including filling u
chemicals, draining of sump tank into drums and/or boats, etc.
Assists in preparation, work and follow-up of maintenance activity on well hea
including Christmas tree maintenance. Participates in commissioning and shutdow
procedures.
Attend minor leaks, gland leaks, flange leak, Valve stems cleaning and greasin
Small coolers, strainers, filters cleaning etc.
Ensure all maintenance and non routine tasks are performed in full compliance wi
PTW system.
Observing all safety, fire and security rules and regulations, including the use
protective clothing and equipment and ensures that all personnel working in h
area comply with safety procedures. Ensures the maintenance of assigned area
clean and tidy conditions.

2. Company : Bapco
Period : March. 2012 to June. 2014
Designation : Field operator
Responsibilities:
Carry out duties as assigned and receives work instructions and execute
association with Shift Supervisor, Panel Operator & Senior Operator.
Monitor process parameters and make an appropriate adjustment when a deviatio
detected and or an upset condition occurred.
Ensure all process plant and utilities equipment's are in a good and in operab
condition to maintain high reliability of the plant.
Trouble shoot and corrective action in case plant shutdown.
Afzal alam Page 2
Perform reporting of daily activities, unsafe condition and PTW audit.
Participate in safety meeting within Operation organization, shares HSE informatio
issue with the group members and provide input.
Involve testing safety equipment and all alarm system periodically to ensure pla
operating in safely and plant emergency preparedness.
Maintain good housekeeping and ensure no pollution into the environment.
Monitor chemical and consumables material usage; ensure that all chemicals a
handled properly and following MSDS instructions.
Competent in Inlet Facilities Operation for Sour Gas (Slug Catchers, Separator
Steam Reboliers, Heat Exchangers, Steam Turbine Compressors, Condensa
Stabilization / Column, Pumps, Fin-Fan Coolers and Gas Metering. Fixed Roof Storag
Tanks and Utilities. Drinking/Service/Cooling Water, Nitrogen, Service / Instrume
Air, Fire Water Network.

3. Company : QP (QATAR PETROLIUM) Dukan Field, QATAR


Period : Feb. 2009 to Jan. 2012
Designation : Wellhead operator/Field operator
Responsibilities:
Patrols the assigned area, monitors/controls, as directed by Shift Supervisor, variou
production and utility systems (e.g. unmanned satellite station, Flow line
wellheads, process common facilities, process trains, vendor packages and maj
rotating equipments).
Check and record in the plant log sheet twice a day a variety of readings such as o
and gas flow, temperature and pressure, and record unusual occurrences aft
reporting them to Shift Supervisor.
Take field reading on regular interval and record operating parameters.
Perform regular sampling as per the established procedure and schedule.
Closely coordinate with shift supervisors and panel operators in start-up, shutdow
and any other routine activities and emergencies.
Stays on the job until properly relieved and does not leave the general are
of responsibility or work without the permission of the Shift Supervisor or Sh
Superintendent on-duty.
During the startup of equipment remotely (such as booster pumps, air compressor
separators) assist in checking and following the startup sequence.
Assist in isolating, draining, purging and handing over equipments for maintenanc
on inspection and check the equipments for its correct operation when th
maintenance job is completed.
Participate, under instructions, in launching pigs into pipelines; prepare pig receiv
stations, remove the pig and check it for damage under the guidance of seni
supervisor.
Attend minor leaks, gland leaks, flange leak, Valve stems cleaning and greasin
Small coolers, strainers, filters cleaning etc.
Observing all safety, fire and security rules and regulations, including the use
protective clothing and equipment and ensures that all personnel working in h
area comply with safety procedures. Ensures the maintenance of assigned area
clean and tidy conditions.

4. Company : National Petrochemical Industrial Co. (NATPET), KSA


Afzal alam Page 3
Period : Dec. 2007 to Jan. 2009
Designation : Mechanical Technician
Responsibilities:
Provided the manpower & material requirements and planned the commissioning
start-up activity.
Checked the alignment without & with piping / final testing / punch listing an
clearing of punch items.
Performed the test run of the mechanical equipment and ensured operatin
parameters.
Monitored the vibration, speed and temperature of rotating equipment.
Assured complete technical integrity and all HSE requirements.
Executed the function testing of mechanical systems in accordance with applicab
mechanical commissioning procedures.

5. Company : Bahrain Petroleum Company (BAPCO), BAHRAIN


Period : Oct. 2006 to Nov. 2007
Designation : Mechanical Technician
Responsibilities:
Carrying out maintenance, repair and overhaul of a variety of plant equipment.
Dismantle, repair or replace parts, re-assemble & alignment either on site or in th
workshop. Carry out appropriate final tests under supervision.
Oversaw the Maintenance of Relive Valves, Control Valves, Gate Valve, Butterfly
Check Valve, NRV and PCV.
Flange management using hydraulic equipments like toque and tensioning tools.
Maintenance Operations under PTW system, Tool Box talk, Risk Assessment, LO/L
Carry out Emergency Response Role.

6. Fertilizers And Chemicals Travancore Ltd. (FACT), INDIA


July. 2004 to Sept. 2006
Mechanical Technician
Responsibilities:
Inspection and maintenance of Static equipment like Furnace, Columns, filters, He
exchangers.
Dismantle, repair or replace parts, re-assemble & alignment either on site or in th
workshop. Carry out appropriate final tests under supervision.
Arrangement of job preparation erection of pipelines, flow lines, plants piping.
Pipelines, Pressure safety valves periodic removal and fixing back.
Trainings
Oil and Gas Field Process Operator Level 1 (NACELL)
BOSIET (OPITO APPROVED) (Certificate No: 52515700220714133327)
H2s \ BA Awareness Course From Qatar Gas and Qatar Petroleum
Permit To Work (PTW) From ZADCO, Qatar Gas, QP
Fire Fighting, Fire Watch and Confined space Training
10 Life Saving Rules Training
Defensive Driving from Qatar Gas

Education
DME(3 Year Diploma in Mechanical Engineering)
Afzal alam Page 4
SSLC(Secondary School Leaving Certificate)

IT Skills
Microsoft word, Excel, Power point, Outlook and Tools
Microsoft project

Personal Details
Date of Birth : 06/02/1992
Nationality : Indian
Languages Known : English, Hindi, urdu
Passport No : M0696683
Expiry Date :
Driving License : Qatar and Indian Driving License Holder
Marital Status : Married
No. of Dependents : 3

Afzal alam Page 5

You might also like