You are on page 1of 16

Atlas Copco

Oil-injected Rotary Screw Compressors


MAS(+) GA 30+-90/MAS+ GA 37-90 VSD (30-90 kW/40-125 hp)
MAS+ GA 55-90PP (55-90 kW/75-120 hp)
The ultimate smart solution, driven by efficiency
Atlas Copcos Marine Air Systems bring you outstanding sustainability, reliability and performance, while minimizing the total cost of ownership.

You can choose between two compressor types MAS GA 30+-90 and MAS GA 37-90 VSD, either water-cooled or air-cooled, available as

MAS+ and MAS version. Built to perform even in the harshest environments at sea, these compressors keep your vessel and equipment

running efficiently.

New heights in sustainability


The MAS GA 30+-90 family stands for sustainable productivity
through lower lifecycle costs and maximum uptime. Operating
cost is minimized thanks to Marine Premium Efficiency motors
with integrated gearbox and the highly efficient element.
The integrated dryer R410A has a Global Warming Potential (GWP)
of 1725 and is compliant with all environmental classification
notations. Maximum uptime is achieved by maintenance from one
side and complete drive train accessibility.

New milestones in reliability


The reliability of the MAS GA 30+-90 range starts with the
cool canopy and low element outlet temperatures, an
Benchmarking performance oversized separate oil cooler and an aftercooler with
Outstanding performance is ensured by design, with Marine patented integrated mechanical separator. The three-
Premium Efficiency motors in combination with AtlasCopcos stage air/oil separation assures low oil consumption.
highly efficient element and an oversized cooling arrangement All electrical cubicles are in overpressure, increasing the
resulting in significant energy savings. Internal pressure drops lifetime of electrical components.
from inlet to discharge are optimized. Efficient smart
compressor controls and Atlas Copco algorithms minimize the
working pressure band, saving energy.
MAS+ GA VSD: Ultimate energy saver
Unique integrated Variable Speed Drive (VSD) technology for on average 35%
energy savings.
Industry-leading operating turndown range and flexible pressure selection: 4-13 bar.
Start under system pressure due to special VSD motor, no idling time.
Integrated Dryer Saver Cycle saves up to 60% of the dryers electrical consumption.
Smart Elektronikon graphic compressor controller with high-definition color display
working to a set point minimizes pressure drops.
MAS+ GA 55-90PP only available in water-cooled version.

MAS + GA: LEADING PERFORMANCE


Built according to all marine notified bodies.
The advanced Elektronikon control and monitoring system maximizes
overall compressor efficiency and reliability and reduces
maintenance costs.
Air dryer, compressed air filters and condensate treatment equipment
can be integrated in the compressor package which minimalizes
installation costs and space requirements.
Same performance as MAS GA.

MAS GA: PREMIUM COMPRESSOR

Designed, built and tested to meet the toughest conditions in


the engine room, such as ambient temperatures of


55C/131F, high humidity, vibrations, 22.5 inclination tests.
Can be delivered as air-cooled or water-cooled version.

VSD: Driving down your energy costs
Over 80% of a compressors lifecycle cost is taken up by the energy it consumes. To cut your energy costs, Atlas Copco

pioneered Variable Speed Drive (VSD) technology in the compressed air industry. VSD leads to major energy savings as

well as a substantial reduction in diesel and maintenance costs. Thanks to continual investments in this technology, Atlas

Copco offers the widest range of integrated VSD compressors on the market.

WHY ATLAS COPCO VARIABLE SPEED DRIVE TECHNOLOGY?


On average 35% energy savings* during fluctuations in production demand with an extensive turndown range.

Integrated Elektronikon Graphic controller controls the motor speed and high efficiency frequency inverter.

No wasted idling times or blow-off losses in normal operation.


Compressor can start/stop under full system pressure without the need to unload with special VSD motor.

Eliminates peak current penalty during start-up.


Minimizes system leakage due to a lower system pressure.


EMC Compliance to directives (2004/108/EG).


IME
NO IDLINGT
Air demand Energy consumption Air demand Energy consumption

Air demand Energy consumption Time Air demand MAS+ GA VSD energy consumption Time
Fixed speed load/unload

In almost every production environment, air demand fluctuates depending on different factors such as the time of
the day, week or even month. Extensive measurements and studies of compressed air demand profiles show that
many compressors have substantial variations in air demand.

On average 35% energy savings*

Atlas Copcos MAS+ GA VSD technology closely follows the air demand by
automatically adjusting the motor speed. This results in on average 35%
energy savings*. The lifecycle cost of a compressor can be cut by an
average of 22%. In addition, lowered system pressure with MAS+ GA VSD
dramatically minimizes energy use across your production.

Total compressor lifecycle cost


Energy Investment

Energy savings with VSD Maintenance

* Depending on total running hours.


How MAS+ GA VSD technology saves energy
Contact your local Atlas Copco representative for an audit of your compressed air system. A real-time measurement
simulation and audit report can be provided with recommendations for additional savings and sizing to meet your
compressed air needs.

AMPS STATUS OF GENERAL LOAD - NO LOAD COMPRESSOR

55.00
50.00

45.00

40.00
35.00

30.00

25.00
20.00

15.00

10.00
5.00 Unload and blow-off losses
Time

WHAT IS UNIQUE ABOUT THE INTEGRATED ATLAS COPCO GA VSD?


1 The Elektronikon controls both the compressor 6 Mechanical enhancements ensure that all com-
and the integrated converter, ensuring maximum ponents operate below critical vibration levels
machine safety within parameters. throughout the entire compressor speed range.

2 Flexible pressure selection from 4 to 13 bar with 7 A highly efficient frequency converter in a cool
electronic gearing reduces electricity costs. overpressure cubicle ensures stable operation in high
ambient temperatures up to 50C/122F*.
3 Special electric motor specifically designed for VSD * Standard up to 46C/114.8F.
operation (inverter duty motor). Bearings are protected
against induced bearing currents. Both motor and 8 No speed windows that can jeopardize the energy
converter are perfectly tuned for highest efficiency savings and the stable net pressure. Turndown
across the entire speed range. capability of the compressor is maximized to 80-85%.

4 Electric motor specifically designed for low 9 The cubicle cooling booster increases the lifetime of
operating speeds with clear attention to motor cooling electrical components due to a cool cubicle in
and compressor cooling requirements. overpressure and reduced dust ingress.

5 All Atlas Copco MAS +


GA VSD compressors are EMC 10 Net pressure band is maintained within 0.10 bar,
tested and certified. External sources do not influence 1.5 psi.
compressor operation, nor does the compressor affect the
operation of other instruments via emissions or via the power
supply line.

Operating range Non-integrated Atlas Copco Combined motor/converter efficiency


solution integrated solution

100%

minimum maximum minimum maximum


Flow Motor speed

Speed windows Non-integrated VSD Integrated VSD


High reliability and smart energy

1
Maintenance-free drive system
100% maintenance-free; totally enclosed and protected against dirt and dust.

Suitable for harsh environments.


High-efficiency drive arrangement; no coupling or slippage losses.


High ambient version for both MAS and MAS+ compressors up to 55C/131F.

2
Marine Premium Efficiency (60 Hz)
electrical motors
IP55, insulation Class F, B rise.

Non-drive side bearing greased for life.


Designed for continuous operation in harsh environments.



9

3
Robust spin-on oil filter
High-efficiency, removing 300% smaller particles

than a conventional filter.


Integrated bypass valve with the oil filter.
1 2

4
SIL Smart inlet lock system for
MAS+ GA VSD compressors
Superior designed vacuum and air pressure controlled

valve with minimal pressure drop and no springs.


Smart stop/start which eliminates back-pressure oil vapor.

5
Separate oversized oil cooler
and aftercooler
Low element outlet temperatures, ensuring long oil lifetime.
Removal of nearly 100% condensate by mechanical separator.
No consumables.
Eliminates possibility of thermal shocks in coolers.
Only for air-cooled versions.
10
Integrated highly efficient
R410A dryer
Excellence in air quality.

50% reduction in energy consumption compared


to traditional dryers.
Zero ozone depletion.

Incorporates optional DD and PD filters according


to Class 1.4.1.
Can be equipped with optional bypass.

GWP <1850 (not applicable for MAS+ GA 55-90PP).


9
Cubicle cooling booster
Cubicle in overpressure minimizes ingress of

conductive dust.
Electrical components remain cool, enhancing
8

lifetime of components.
5

8
Elektronikon for remote
7 4
monitoring
Integrated smart algorithms reduce system

pressure and energy consumption.


Monitoring features include warning indications,

3 maintenance scheduling and online


visualization of machines condition.

7
Heavy-duty air intake filter
Protects the compressor components by

removing 99.9% of dirt particles down to 3


microns.
Differential inlet pressure for proactive

maintenance while minimizing pressure drop.

6
Electronic no-loss water drain
Ensures constant removal of condensate.
Manual integrated bypass for effective condensate removal in case of
power failure.
Integrated with compressors Elektronikon with warning/alarm features.
Not applicable for the MAS+ GA 55-90PP.
A step ahead in monitoring and controls
The next-generation Elektronikon operating system offers a wide variety of control and monitoring features that allow you to increase

your compressors efficiency and reliability. To maximize energy efficiency, the Elektronikon controls the main drive motor and regulates

system pressure within a predefined and narrow pressure band.

Improved user-friendliness
3.5-inch high-definition color display with clear pictograms
Graphical indication Serviceplan, remote control and

and extra 4th LED indicator for service. connectivity functions.


Graphical display of key parameters (day, week, month) and
Software upgrade available to control up to 6 compressors

32 language settings. by installing the optional integrated compressor controller.


Internet-based compressor visualization using a simple

Ethernet connection.
On-screen Delayed Second Stop function and VSD savings

indication.

Online & mobile monitoring


Monitor your compressors over the Ethernet with the
new Elektronikon controller. Monitoring features
include warning indications, compressor shut-down and
maintenance scheduling. The Atlas Copco App is
available for iPhone/Android phones as well as iPad
and Android tablets. It allows fingertip monitoring
of your compressed air system through your own
secured network.
Optional integrated compressor controller
Install, with a simple license, the optional integrated compressor controller and get simple, central control to reduce system pressure and

energy consumption in installations of up to 4 (ES4i) or 6 (ES6i) compressors.

Net Pressure WITHOUT CONTROL WITH CONTROL

1
2
Average Pressure
3 1 2 3 Average Pressure
Min. System Pressure Min. System Pressure

Compressors

The Elektronikon continuously monitors critical parameters. Monitoring features include service and warning indications, error detection, compressor
shut-down and maintenance scheduling.

Dual pressure set point & Delayed Second stop


Most production processes create fluctuating levels of demand use times. In addition, the sophisticated Delayed Second Stop
which, in turn, can create energy waste in low use periods. (DSS) runs the drive motor only when needed. As the desired
Using either the standard or graphic Elektronikon controller, system pressure is maintained while the drive motors run time
you can manually or automatically create two different system is minimized, energy consumption is kept at a minimum.
pressure bands to optimize energy use and reduce costs at low

Without DSS With DSS

Power Power

Loaded Loaded

Unloaded Unloaded
Time Time
Stopped
Saved energy

Integrated Dryer Saver Cycle


Saver Cycle technology reduces the energy consumption of the dew point suppression, the Elektronikon starts and stops the
integrated refrigerant dryers with the fan in light load dryer and the fan, minimizing energy use and protecting the air
applications. Using an ambient sensor to monitor the required system from corrosion.
Excellence in integrated air quality
Untreated compressed air contains moisture, aerosols and dirt particles that can damage your air system and contaminate your end product,

resulting in risk of corrosion and compressed air system leaks. Maintenance costs can far exceed air treatment costs. Our compressors provide the

clean, dry air that improves your systems reliability, avoids costly downtime and production delays, and safeguards the quality of your products.

E
ZERO OZON N
DEPLETIO

On average 50% energy savings with


R410A integrated dryers
- Use of energy-efficient refrigerant R410A reduces operating costs.
- R410A refrigerant reduces global warming potential by an average
of 50%.
- Environmentally-friendly characteristics; zero ozone depletion.
- Unique Saver Cycle Control, with ambient temperature sensor and
based on dryer load and relative humidity of compressed air, saves
energy at partial load.
- Heat exchanger cross-flow technology with low pressure drop.
- Zero waste of compressed air thanks to no-loss condensate drain.
- Pressure dew point of 3C (100% relative humidity at 20C).

Integrated purity
The optional DD/PD filters and integrated refrigerant air dryer downstream equipment, increasing efficiency and ensuring
(IFD) efficiently remove moisture, aerosols and dirt particles to quality of your final product.
protect your investment. This air quality prolongs the life of

ISO quality class* Dirt particle size Water pressure dew point** Oil concentration

3.-.4 3 microns - 3 ppm

3.4.4 3 microns +3C, 37F 3 ppm

2.4.2 1 micron +3C, 37F 0.1 ppm

1.4.1 0.01 microns +3C, 37F 0.01 ppm

* The table values reflect the maximum limits according to the temperature ISO gravity class.
** Water pressure dew point based on 100% RH at 20C/68F.
MAS compressors:
compressed air at the point of use
With the industry-leading low noise operation and integration of air and condensate treatment equipment, the MAS GA offers complete

versatility for your working air on board. The compressors integrated design allows it to be installed in the workshop or close to the

accommodation area, especially for ships of offshore units working 24 hours a day.

Low installation costs


The MAS and MAS+ GA can operate close to the point of use eliminating the need for a dedicated compressor room.

The MAS and MAS+ GA are delivered ready for use minimizing production downtime and reducing installation costs.

Filtration equipment is integrated reducing the need for costly external piping and minimizing pressure drops (not applicable for

MAS+ GA 55-90PP).
Low noise enables the above to be a reality (not applicable for MAS+ GA 55-90PP).

Reduced energy and maintenance costs


With less external piping, the MAS(+) GA minimizes pressure drop across the system which can reduce energy costs.

The filtration system produces clean air to prevent network corrosion minimizing energy, repair and maintenance costs (not

applicable for MAS+ GA 55-90PP).


The MAS(+) GA operates at the lowest possible system pressure to reduce energy costs thanks to the Elektronikon advanced

monitoring system.
MAS PP compressors:
high performance marine air
Atlas Copcos Marine Air Systems PP compressors bring you the same optimum sustainability, reliability and performance as their MAS GA

counterparts, while boasting a very small footprint. Built to withstand the harshest environments at sea, these compressors are robust yet

extremely easy to maintain.

Compact & space-saving. Easy maintenance.


Superb reliability and durability. Optional canopy is available.


Low installation costs.

Optimize your system


Some applications may need or may benefit from additional options and more refined control/air treatment systems. To meet these
needs, Atlas Copco has developed options and easily integrated compatible equipment.

Description MAS MAS + MAS + PP

Marine motor -
Ambient temperature 55C
Controller with DSS function
Tropical thermostat
AM meter -
Halogen-free cabling -
Flame retardant wiring -
Doorstopper - -
Remote stop/start
Voltage-free contacts
Motor heating and thermistor protection -

Star-delta start
Variable Speed Drive (VSD) -

400/460/690 V 50 & 60 Hz
Main switch
Re-silent chocks
Approvals -

Built-in air dryer -

Oil-containing frame - -
Closed design *

* Extra canopy reducing noise level to 76 dB(a).


: Standard : Optional - :Not available
Flow charts
VARIABLE SPEED DRIVE: MAS+ GA VSD

E A Intake air
B Air/oil mixture
C Oil
A
D Wet compressed air
E Condensate
D
F Dried compressed air
B
E
1 Aircooled version
2 Watercooled version
C
Vp
1

FIXED SPEED: MAS(+) GA

E
A Intake air
B Air/oil mixture
C Oil
D Wet compressed air
E Condensate
A D
B F Dried compressed air
E

C
Vp

A Intake air D Wet compressed air


MAS
B GA PP
+ Air/oil mixture
E Condensate

C Oil A F Dried compressed air

Cwa A Intake air


D
B B Air/oil mixture
C Oil
D Wet compressed air
C F Cooling water flow
Vp
Cwo

F
82896D

A Intake air D Wet compressed air

B Air/oil mixture F Cooling water flow

C Oil
MAS+ GA 37, 45 VSD Width 1766 mm, 69.5"
MAS+ GA 30+, 37, 45 Depth 970 mm, 38.2"
MAS GA 30+, 37, 45 Height 1800 mm, 70.9"
H
MAS+ GA 55, 75, 90 VSD Width 2316 mm, 91.2"
MAS+ GA 55, 75, 90 Depth 1080 mm, 42.5"
MAS GA 55, 75, 90 Height 1955 mm, 77"

Width 1540 mm, 60.6"


MAS+ GA 55, 75, 90PP Depth 1000 mm, 39.4"
Height 1540 mm, 60.6"
D
W
Technical specifications MAS(+) GA 30+-90 (50 Hz versions)
Outlet air temperature Weight Free Air Delivery*
Heat Cooling
Sound
Air-cooled Water-cooled Water- Dimensions dissipa- Water-
Air-cooled Air-cooled / level**
Compressor Without Without cooled 7.5 bar 8.5 bar 10 bar 13 bar tion cooled
kW With dryer Water-cooled
TYPE dryer dryer With dryer

L W H
P/ kg m/h kW l/min
(mm) (mm) (mm)

MAS( ) GA 30
+ +
30 a+7C a+3C cwt+7C cwt+3C 817/898 1766 970 1800 321 289 269 228 74 26 35
MAS(+) GA 37 37 a+7C a+3C cwt+7C cwt+3C 820/905 1766 970 1800 371 342 326 259 78 30 39
MAS(+) GA 45 45 a+7C a+3C cwt+7C cwt+3C 894/979 1766 970 1800 443 409 379 335 81 36 45
MAS(+) GA 55 55 a+7C a+3C cwt+7C cwt+3C 1229/1329 2316 1080 1955 522 503 477 405 78 43 65
MAS(+) GA 75 75 a+7C a+3C cwt+7C cwt+3C 1259/1379 2316 1080 1955 737 657 584 507 82 57 90
MAS(+) GA 90 90 a+7C a+3C cwt+7C cwt+3C 1425/1545 2316 1080 1955 866 865 777 652 82 72 90

Technical specifications MAS(+) GA 30+-90 (60 Hz versions)


Outlet air temperature Weight Free Air Delivery*
Heat Cooling
Sound
Air-cooled Water-cooled Water- Dimensions dissipa- Water-
Air-cooled Air-cooled / level**
Compressor Without Without cooled 7.4 bar 9.1 bar 10 bar 13 bar tion cooled
kW With dryer Water-cooled
TYPE dryer dryer With dryer

L W H
P/ kg m/h dB(A) kW l/min
(mm) (mm) (mm)

MAS( ) GA 30
+ +
30 a+7C a+3C cwt+7C cwt+3C 817/898 1766 970 1800 326 277 262 239 74 26 35
MAS(+) GA 37 37 a+7C a+3C cwt+7C cwt+3C 820/905 1766 970 1800 372 344 312 284 78 30 39
MAS(+) GA 45 45 a+7C a+3C cwt+7C cwt+3C 894/979 1766 970 1800 449 414 379 340 81 36 45
MAS(+) GA 55 55 a+7C a+3C cwt+7C cwt+3C 1229/1329 2316 1080 1955 554 494 452 411 78 43 65
MAS(+) GA 75 75 a+7C a+3C cwt+7C cwt+3C 1259/1379 2316 1080 1955 705 656 600 542 82 57 90
MAS(+) GA 90 90 a+7C a+3C cwt+7C cwt+3C 1425/1545 2316 1080 1955 927 865 796 716 82 72 90

* Unit performance measured according to ISO 1217, Annex C, Edition 4


Reference conditions:
Absolute inlet pressure 1 bar (14.5 psi)

Intake air temperature 20C, 68F

FAD is measured at the following working pressures:


7.5 bar versions at 7 bar

8.5 bar versions at 8 bar

10 bar versions at 9.5 bar

13 bar versions at 12.5 bar

** A-weighted emission sound pressure level at the work station, Lp WSA (re 20 Pa) dB (with uncertainty 3 dB).
Values determined according to noise level test code ISO 2151 and noise measurement standard ISO 9614.
Pressure dew point of integrated refrigerant dryer at reference conditions: 2C to 3C, 36F to 37F.
Technical specifications MAS+ GA 55-90PP (50 Hz versions)

Outlet air temperature Weight Free Air Delivery*


Heat Cooling
Sound
Air-cooled Water-cooled Water- Dimensions dissipa- Water-
Air-cooled Air-cooled / level**
Compressor Without Without cooled 7.5 bar 8.5 bar 10 bar 13 bar tion cooled
kW With dryer Water-cooled
TYPE dryer dryer With dryer

L W H
P/ kg m/h dB(A) kW l/min
(mm) (mm) (mm)

MAS GA 55PP
+
55 N/A N/A cwt+7C N/A 930 1540 1000 1540 517 498 472 401 85 48 55
MAS+ GA 75PP 75 N/A N/A cwt+7C N/A 930 1540 1000 1540 729 651 578 502 85 64 90
MAS+ GA 90PP 90 N/A N/A cwt+7C N/A 980 1540 1000 1540 857 857 770 646 85 80 90
MAS+ GA 55PP1 55 N/A N/A cwt+7C N/A 930 1540 1000 1540 582 545 509 435 85 48 55
MAS+ GA 75PP1 75 N/A N/A cwt+7C N/A 930 1540 1000 1540 760 720 652 561 85 64 90
MAS+ GA 90PP1 90 N/A N/A cwt+7C N/A 980 1540 1000 1540 967 945 859 755 85 80 90

1
Max. ambient temperature 46C

Technical specifications MAS+ GA 55-90PP (60 Hz versions)

Outlet air temperature Weight Free Air Delivery*


Heat Cooling
Sound
Air-cooled Water-cooled Water- Dimensions dissipa- Water-
Air-cooled Air-cooled / level**
Compressor Without Without cooled 7.4 bar 9.1 bar 10 bar 13 bar tion cooled
kW With dryer Water-cooled
TYPE dryer dryer With dryer

L W H
P/ kg m/h dB(A) kW l/min
(mm) (mm) (mm)

MAS GA 55PP
+
55 N/A N/A cwt+7C N/A 930 1540 1000 1540 548 489 447 407 85 48 55
MAS+ GA 75PP 75 N/A N/A cwt+7C N/A 930 1540 1000 1540 698 650 594 536 85 64 90
MAS+ GA 90PP 90 N/A N/A cwt+7C N/A 980 1540 1000 1540 918 857 788 709 85 80 90
MAS+ GA 55PP1 55 N/A N/A cwt+7C N/A 930 1540 1000 1540 599 531 487 444 85 48 55
MAS+ GA 75PP1 75 N/A N/A cwt+7C N/A 930 1540 1000 1540 771 688 651 584 85 64 90
MAS+ GA 90PP1 90 N/A N/A cwt+7C N/A 980 1540 1000 1540 996 917 860 789 85 80 90

1
Max. ambient temperature 46C

Technical specifications MAS+ GA 37-90 VSD (50/60 Hz versions)

Capacity FAD* Weight


Installed motor Noise Weight
Working pressure WorkPlace
Compressor power level** WorkPlace
Full Feature
TYPE l/s m /h
3
cfm

bar(e) psig min max min max min max kW hp dB(A) kg lbs kg lbs

MAS+ GA 4 58 26.0 124 96 444 55 263 37 50 66/67 1042 2297 1127 2485
37 VSD
7 102 26.0 123 96 444 55 260 37 50 66/67 1042 2297 1127 2485
10 145 25.8 107 90 384 55 226 37 50 66/67 1042 2297 1127 2485
13 189 40.3 87 144 312 85 185 37 50 66/67 1042 2297 1127 2485
MAS+ GA 4 58 26.0 146 96 528 55 310 45 60 69/72 1100 2425 1190 2624
45 VSD
7 102 26.0 145 96 522 55 307 45 60 69/72 1100 2425 1190 2624
10 145 25.8 128 90 462 55 271 45 60 69/72 1100 2425 1190 2624
13 189 40.3 107 144 384 85 226 45 60 69/72 1100 2425 1190 2624
MAS + GA 4 58 32.4 197 114 708 69 418 55 75 69/72 1380 3042 1480 3263
55 VSD
7 102 26.0 175 96 630 55 371 55 75 69/72 1380 3042 1480 3263
10 145 25.4 155 90 558 54 328 55 75 69/72 1380 3042 1480 3263
13 189 37.0 129 132 462 78 273 55 75 69/72 1380 3042 1480 3263
MAS+ GA 4 58 37.8 250 138 900 80 529 75 100 69/70 1534 3382 1654 3646
75 VSD
7 102 37.4 250 132 900 79 530 75 100 69/70 1534 3382 1654 3646
10 145 48.1 219 174 792 102 465 75 100 69/70 1534 3382 1654 3646
13 189 58.3 182 210 654 124 386 75 100 69/70 1534 3382 1654 3646
MAS+ GA 4 58 37.0 293 132 1056 78 621 90 125 73/74 1534 3382 1654 3646
90 VSD
7 102 39.4 292 144 1050 84 619 90 125 73/74 1534 3382 1654 3646
10 145 48.3 257 174 924 102 545 90 125 73/74 1534 3382 1654 3646
13 189 59.4 214 216 774 126 454 90 125 73/74 1534 3382 1654 3646

* Unit performance measured according to ISO 1217, Annex E, Edition 4


Reference conditions:
Absolute inlet pressure 1 bar (14.5 psi)

Intake air temperature 20C, 68F

FAD is measured at the following working pressures:


7.5 bar versions at 7 bar

8.5 bar versions at 8 bar

10 bar versions at 9.5 bar

13 bar versions at 12.5 bar

** A-weighted emission sound pressure level at the work station, Lp WSA (re 20 Pa) dB (with uncertainty 3 dB).
Values determined according to noise level test code ISO 2151 and noise measurement standard ISO 9614.
Pressure dew point of integrated refrigerant dryer at reference conditions: 2C to 3C, 36F to 37F.
Driven by innovation
With more than 140 years of innovation and experience, Atlas Copco will deliver the
products and services to help maximize your companys efficiency and productivity.
As an industry leader, we are dedicated to offering high air quality at the lowest

2935 0901 44 - 2013, Atlas Copco Airpower NV, Belgium. All rights reserved. Designs and specifications are subject to change without notice or obligation. Read all safety instructions in the manual before usage.
possible cost of ownership. Through continuous innovation, we strive to safeguard
your bottom line and bring you peace of mind.

Building on interaction
As part of our long-term relationship with our customers, we have accumulated
extensive knowledge of a wide diversity of processes, needs and objectives. This
gives us the flexibility to adapt and efficiently produce customized compressed air
solutions that meet and exceed your expectations.

A committed business partner


With a presence in over 170 countries, we will deliver high-quality customer
service anywhere, anytime. Our highly skilled technicians are available 24/7
and are supported by an efficient logistics organization, ensuring fast delivery
of genuine spare parts when you need them. We are committed to providing
the best possible know-how and technology to help your company produce,
grow, and succeed. With Atlas Copco you can rest assured that your superior
productivity is our first concern!

www.atlascopco.com/marine

You might also like