You are on page 1of 8

222 TAGORE LANE, #01-11 TG BUILDING

SINGAPORE 787603
TEL: 6753-1188 FAX: 6452-9800
Email: sales@capmar.com.sg
Http: www.capmar.com.sg

(Co. Reg. No. 199305821H)


Oversea Offices: Jakarta-Surabaya

3 March 2015

OUR REF: Q/JC/2015.0120

Mr Ifan Yulfana
Marketing Manager

PT. Wokatuba Indonesia


Jl. Cut Meutia No.77 Sepanjang Jaya
Rawa Lumbu - Bekasi 17114, Indonesia
Tel/Fax: (62-21) 8241 3527
Website: www.wokatuba.co.id
Cell: 0812 8998 3966

RE: PT FEDERAL KARYATAMA HIGH-SHEAR DISPERSING MACHINE

Following our last visit to your clients office and have had meeting with their technical director, we are pleased
to offer the following for your consideration:

ALTERNATIVE-A

High-shear dispersing machine DISPAX-REACTOR DR 2000/40
Description:

The DISPAX-REACTOR DR 2000 is a three-stage inline dispersing machine. Finest emulsions and suspensions
can be produced in only one passage. The three rotor-stator-systems (generators) enable very small particle
resp. droplet sizes with a narrow particle distribution.

IKA offers a great variety of generators for the DISPAX-REACTOR DR 2000, so that the machine can be
perfectly adapted to your process.

In continuous processes the components to be dispersed are conveyed through the DISPAXREACTOR in one
passage.

In batch operation the machine is connected to a vessel for recirculating operation.

1
DISPAX-REACTOR DR CROSS SECTION


Advantages of the DISPAX-REACTOR DR 2000:

Stable construction in modular design


Improved dispersing and homogenizing performance
Great variety of dispersing tools for the most different processes
Easy scale-up due to eight different construction sizes
High quality seals in cartridge-construction
High quality surfaces
The machine is self-draining and CIP-resp. SIP-capable
Easy speed adjustment due to the belt drive
All product contacting parts made of stainless steel AISI 316L/316Ti
Other materials and surfaces available on request
Low noise level
Manufactured acc. to EHEDG-guidelines (European Hygienic Engineering and Design Group)
Certified acc. to 3A-Sanitary Standard
Ex-proof design acc. to ATEX-94/9/EC-guidelines available


1 Technical data: DISPAX-REACTOR Type DR 2000/40

1.1 General Technical Data


Max total capacity (ref. H2O): 70,000 litres/hr

Materials: The housing of all parts in contact with the product,


if not otherwise specified, are made out of:
Denominations: Stainless steel 316L and 316T
Surfaces: All parts in contact with the product, if not otherwise
specified, are polished to surface finish of:
Internal surfaces: Ra 0.8 1.2 um
External surfaces: Ra 3.2 um
2
All other parts are ground and painted with a chemical
resistant lacquer.
Color of base and lantern: Blue acc. To NCS4040 R80B (not in case of stainless
steel)

Max admissible operating data:


Temperature: -10 / +120C
Pressure: -1 / +16 bar

1.2 Scope of supply


Mixing tools
Generator 1: 2G (coarse)
Generator 2: 4M (medium)
Generator 3: 6F (fine)
Speed: 1,500 rpm
Circumferential speed: 23 m/s
Connections
Inlet
Type: DIN 2633 PN 16 flange
Nominal size: DN 150
Outlet
Type: DIN 263 PN 16 flange
Nominal size: DN 125

Double jacket: For heating/cooling of the process chamber by means


of water, steam or thermal oil.
Nominal size inlet/outlet: Connections G
Max admissible operating data:
Temperature: 120C
Pressure: 2.5 bar
Motor
Type of drive: 3-phase asynchrony motor with V-belt drive
Power: 75 kw
Motor speed: 1500 rpm
Voltage/frequency: 220/380V, 3 PH, 50 Hz
Protection class: F
Explosion-proof: No
Speed regulator: Possible (inverter not scope of supply)
Color of motor: Grey acc RAL 7015
Covering hood for the drive motor: Without
Base frame: For the safe installation of the machine and mounting
of the locking pressure system.
Setting up: The machine is equipped with 4 rubber-bonded metal
feet.
Bearing lantern: The bearing lantern contains the bearing of the tool
shaft and serves as basis for the components of the
process part.
Material: Grey cast iron GG25
Elastomer: FPM

Mechanical seal:
Type: Double mechanical seal
Material combination: Q1Q1VMG-BQ1VMG
Q1 = Silicone carbide
Q1 = Silicone carbide
V = Viton
M = Hastelloy
G = Stainless steel
B = Carbon, resin impregnated

3
Locking pressure system
Pressure locking vessel: For the cooling and lubrication of the mechanical seal,
vessel with a volume of 3 litres.
Version: Standard
Equipped with: Two level sight glasses, pressure admission valve,
refilling valve and manometer, connections for the
heating/cooling coil, flexible pressure hoses for inlet
and outlet of locking liquid.
Suitable barrier fluid: Water-glycol-mixture (max 5%) or white oil with
viscosity <10 mPas.

Documentation
Technical documentation: The machine will be supplied with a one-fold technical
documentation in English language consisting og:
- Instruction manual
- Dimension and assembly drawing
- Spare parts lists.

Prices and commercial conditions:

Budgetary Price for DR 2000/40 machine as


As above detailed: EURO 210,000

Provision for expertise and labor of IKA engineers: EURO 3000.00


(mechanical) to supervise the installation and
Commissioning of the DR 2000/40 unit
(2 days for each machine)

Packaging and local handling charges: EURO 1200.00

Total CIF Jakarta Seaport: EURO 214,200.00

Delivery time: 20 weeks after confirmation

Payment term: 40% down payment and balance 60% by L/C at sight
(confirmed L/C to be received within 2 weeks from
date of firm order)

Validity: 60 days from date of offer.

4
ALTERNATIVE-B

High-shear dispersing machine DISPAX-REACTOR DR 2000/50
Description:

The DISPAX-REACTOR DR 2000 is a three-stage inline dispersing machine. Finest emulsions and suspensions
can be produced in only one passage. The three rotor-stator-systems (generators) enable very small particle
resp. droplet sizes with a narrow particle distribution.

IKA offers a great variety of generators for the DISPAX-REACTOR DR 2000, so that the machine can be
perfectly adapted to your process.

In continuous processes the components to be dispersed are conveyed through the DISPAXREACTOR in one
passage.

In batch operation the machine is connected to a vessel for recirculating operation.

DISPAX-REACTOR DR CROSS SECTION


Advantages of the DISPAX-REACTOR DR 2000:

Stable construction in modular design


Improved dispersing and homogenizing performance
Great variety of dispersing tools for the most different processes
Easy scale-up due to eight different construction sizes
High quality seals in cartridge-construction
High quality surfaces
5
The machine is self-draining and CIP-resp. SIP-capable
Easy speed adjustment due to the belt drive
All product contacting parts made of stainless steel AISI 316L/316Ti
Other materials and surfaces available on request
Low noise level
Manufactured acc. to EHEDG-guidelines (European Hygienic Engineering and Design Group)
Certified acc. to 3A-Sanitary Standard
Ex-proof design acc. to ATEX-94/9/EC-guidelines available


1 Technical data: DISPAX-REACTOR Type DR 2000/50

1.1 General Technical Data


Max total capacity (ref. H2O): 125,000 litres/hr

Materials: The housing of all parts in contact with the product,


if not otherwise specified, are made out of:
Denominations: Stainless steel 316L and 316T
Surfaces: All parts in contact with the product, if not otherwise
specified, are polished to surface finish of:
Internal surfaces: Ra 0.8 1.2 um
External surfaces: Ra 3.2 um
All other parts are ground and painted with a chemical
resistant lacquer.
Color of base and lantern: Blue acc. To NCS4040 R80B (not in case of stainless
steel)

Max admissible operating data:


Temperature: -10 / +120C
Pressure: -1 / +16 bar

1.2 Scope of supply


Mixing tools
Generator 1: 2G (coarse)
Generator 2: 4M (medium)
Generator 3: 6F (fine)
Speed: 1,500 rpm
Circumferential speed: 23 m/s
Connections
Inlet
Type: DIN 2633 PN 16 flange
Nominal size: DN 200
Outlet
Type: DIN 263 PN 16 flange
Nominal size: DN 125

Double jacket: For heating/cooling of the process chamber by means


of water, steam or thermal oil.
Nominal size inlet/outlet: Connections G
Max admissible operating data:
Temperature: 120C
Pressure: 2.5 bar
Motor
Type of drive: 3-phase asynchrony motor with V-belt drive
Power: 160 kw
Motor speed: 1500 rpm
Voltage/frequency: 220/380V, 3 PH, 50 Hz
Protection class: F

6
Explosion-proof: No
Speed regulator: Possible (inverter not scope of supply)
Color of motor: Grey acc RAL 7015
Covering hood for the drive motor: Without
Base frame: For the safe installation of the machine and mounting
of the locking pressure system.
Setting up: The machine is equipped with 4 rubber-bonded metal
feet.
Bearing lantern: The bearing lantern contains the bearing of the tool
shaft and serves as basis for the components of the
process part.
Material: Grey cast iron GG25
Elastomer: FPM

Mechanical seal:
Type: Double mechanical seal
Material combination: Q1Q1VMG-BQ1VMG
Q1 = Silicone carbide
Q1 = Silicone carbide
V = Viton
M = Hastelloy
G = Stainless steel
B = Carbon, resin impregnated

Locking pressure system


Pressure locking vessel: For the cooling and lubrication of the mechanical seal,
vessel with a volume of 3 litres.
Version: Standard
Equipped with: Two level sight glasses, pressure admission valve,
refilling valve and manometer, connections for the
heating/cooling coil, flexible pressure hoses for inlet
and outlet of locking liquid.
Suitable barrier fluid: Water-glycol-mixture (max 5%) or white oil with
viscosity <10 mPas.

Documentation
Technical documentation: The machine will be supplied with a one-fold technical
documentation in English language consisting og:
- Instruction manual
- Dimension and assembly drawing
- Spare parts lists.

Prices and commercial conditions:

Budgetary Price for DR 2000/40 machine as


As above detailed: EURO 252,000

Provision for expertise and labor of IKA engineers: EURO 3000.00


(mechanical) to supervise the installation and
Commissioning of the DR 2000/40 unit
(2 days for each machine)

Packaging and local handling charges: EURO 1500.00

Total CIF Jakarta Seaport: EURO 256,500.00

Delivery time: 20 weeks after confirmation

7
Payment term: 40% down payment and balance 60% by L/C at sight
(confirmed L/C to be received within 2 weeks from
date of firm order)

Validity: 60 days from date of offer.

We trust the above is favorable and we look forward to have further discussion with you on this offer.

Best Regards

JEFFREY CHUA

You might also like