You are on page 1of 2

High-pressure hoses

2-4

5
6

1 Inner layer in various types of rubber


2 - 4 Reinforced layers braided nylon
5 Outer layer precission-machined
6 Rough outer surface before processing

Product Fitted for the purpose


The essential component of high-pressure
hose pumps is a hose that is constructed of Consistent tolerances, quality and
layers of rubber reinforced by winding seve-
shimming
ral layers of dyed nylon cords. The inner and
outer layers are extruded. The inner layer is Improved life from reduced friction
available in a range of rubber compounds.
Excellent suction performance
Bredel hoses have highpressure characteris- High pressure capability
tics and precise dimensions and give excel-
lent suction. The result: constant flow under Volumetric accuracy
varying suction and discharge conditions, and Exceptional performance when
extraordinary ability to handle viscous liquids.
handling highly viscous liquids
Since rubber cannot be over- or under- com-
pressed, hose lifetime and pump efficency are
both increased.
Inner diameter Wall thickness Tolerance of Maximum working Flow variation
(mm) (mm) wall thickenss pressure (bar) during life time
(+/- mm) (+/- %)
10 10,5 0,40 7,5 1
15 10,5 0,40 7,5 1
20 8,5 0,20 7,5 1
25 14,1 0,20 16 1
32 14,5 0,20 16 1
40 13,2 0,20 16 1
50 15,0 0,20 16 1
65 17,1 0,20 16 1
80 21,0 0,25 16 1
100 22,0 0,25 16 1
By configuring the right combination of pump and hose, Watson-Marlow Bredel pumps can meet the flow,
pressure and temperature characteristics of any application.

NATURAL RUBBER (NR) HYPALON (CSM)


Cis-Poly isoprene rubber. Chlorosuphonyl polyethylene
Always your first choice. rubber. This type of rubber
A highly resilient material has outstanding chemical
with outstanding abrasion resistance to highly concentra-
resistance. Generally resis- ted acids, bases, ozone,
tant to diluted acids and and other oxidising materials.
alcohols. Max. fluid temperature 80 C
Max. fluid temperature 80 C Min. temperature -10 C
Min. temperature -20 C

BUNA N (NBR) MARPRENE


Acrylonitrile butadiene Thermoplastic elastomer with
rubber. Approved to FDA and a wide chemical compatibility
3A standards, this durable and is highly resistant to oxi-
material is resistant to oils, dising agents such as ozone,
greases, alkalis and deter- peroxides and hypochlorite.
gents. It is suitable for a wide Marprene is also opaque
range of applications in the to both visible and ultra-
food industry. violet light, and maintains low
Max. fluid temperature 80 C permeability to gases such as
Min. temperature -10 C oxygen, carbon dioxide and
nitrogen.

EPDM PETROPROOF
Ethylene propylene diene Thermoplastic elastomer
rubber. A product with ex- that matches oil resistance
cellent chemical resistance, with the dynamic properties
especially to ketones, needed for long life in a hose
alcohols and concentrated pump.
acids.
Max. fluid temperature 90 C
Min. temperature -10 C

fluidity.nonstop is our promise and our commitment to a level of service and a quality of product, performance and epertise the like of which
has not been seen before.
We are Europes leading source of pumps and pump expertise for the process industry and we intend to maintain that position by working
fluidly, and ceaselessly, to bring you the best.
AxF-0100-02-228

www.axflow.nl
tel. +31 36 5381211

You might also like