You are on page 1of 2

GD&T Symbols Reference

GD&T Control
Name Summary Description
Symbol Type

Controls the straightness of a feature in relation to its own perfect


Form Straightness
form

Form Flatness Controls the flatness of a surface in relation to its own perfect form

Controls the form of a revolved surface in relation to its own


Form Circularity
perfect form by independent cross sections

Form Cylindricity Like circularity, but applies simultaneously to entire surface

Profile of a Controls size and form of a feature. In addition it controls the


Profile
Surface location and orientation when a datum reference frame is used.

Profile Profile of a Line Similar to profile of a surface, applies to cross sections of a feature

Controls the orientation of a feature which is nominally


Orientation Perpendicularity
perpendicular to the primary datum of its datum reference frame

Controls orientation of a feature at a specific angle in relation to


Orientation Angularity
the primary datum of its datum reference frame

Controls orientation of a feature which is nominally parallel to the


Orientation Parallelism
primary datum of its datum reference frame

Controls the location and orientation of a feature in relation to its


Location Position
datum reference frame

Location Concentricity Controls concentricity of a surface of revolution to a central datum

Location Symmetry Controls the symmetry of two surfaces about a central datum

Controls circularity and coaxiality of each circular segment of a


Runout Circular runout
surface independently about a coaxial datum

Controls circularity, straightness, coaxiiality, and taper of a


Runout Total runout
cylindrical surface about a coaxial datum

SEE WHAT YOURE MISSING Copyright Sigmetrix, LLC


GD&T Symbols Reference
Symbol Meaning Symbol Meaning

LMC Least Material Condition Dimension Origin

MMC Maximum Material Condition Counterbore

Tangent Plane Countersink

Projected Tolerance Zone Depth

Free State All Around

Diameter Between

Radius Target Point

Spherical Radius Conical Taper

Spherical Diameter Slope

Controlled Radius Square

Statistical Tolerance

{77} Basic Dimension

(77) Reference Dimension

5X Places

Our GD&T Advisor software solution provides the automation you need to make manual GD&T methods a thing
of the past! This unique, state-of-the-art solution accelerates the design process, saving valuable time, and
reduces the manufacturing costs like scrap and change orders, saving thousands of dollars every year.

This reference guide brought to you compliments of Sigmetrix the world leader in tolerance analysis and
design optimization solutions. To learn more about the GD&T Advisor solution or any of our tolerance analysis
software and services, contact us at info@sigmetrix.com.

SEE WHAT YOURE MISSING Copyright Sigmetrix, LLC

You might also like