You are on page 1of 4

For technical assistance, please contact :

Email: support@intelitek.com
Tel: 1800-777-6268 (toll free in the USA)
Website: www.intelitek.com
Tel: (603) 625-8600 Fax: (603) 625-2137
444 East Industrial Park Drive
Manchester, NH 03109-5317, USA

Assembly Instructions for I/O Experiment Table -


001201 (for version D and higher)

Figure 1: I/O Experiment Table

1 Cat No. N101931 Rev. A


For technical assistance, please contact :
Email: support@intelitek.com
Tel: 1800-777-6268 (toll free in the USA)
Website: www.intelitek.com
Tel: (603) 625-8600 Fax: (603) 625-2137
444 East Industrial Park Drive
Manchester, NH 03109-5317, USA

Figure 2: I/O Experiment Table Schematic


I/O Experiment Table 001201 (for version D and higher)
(+)
White

DC 12-24Vdc

(-)
Black

Lamp
COM Relay Output
Green

NO Relay Output
Blue
Buzzer

COM Relay Output


Gray

NO Relay Output
Purple

Microswitch 1
Input NPN
Brown

Microswitch 2
Input NPN
Red

Microswitch 3
Input NPN
Orange

Microswitch 4
Input NPN
Yellow

2 Cat No. N101931 Rev. A


For technical assistance, please contact :
Email: support@intelitek.com
Tel: 1800-777-6268 (toll free in the USA)
Website: www.intelitek.com
Tel: (603) 625-8600 Fax: (603) 625-2137
444 East Industrial Park Drive
Manchester, NH 03109-5317, USA

Figure 3: Controller USB I/O Connections

Figure 4: Controller USB-Pro I/O Connections

3 Cat No. N101931 Rev. A


For technical assistance, please contact :
Email: support@intelitek.com
Tel: 1800-777-6268 (toll free in the USA)
Website: www.intelitek.com
Tel: (603) 625-8600 Fax: (603) 625-2137
444 East Industrial Park Drive
Manchester, NH 03109-5317, USA

Table 1: I/O Experiment Table Suggested I/O Connections

Wire Color Microswitch Inputs Outputs Outputs Power


(Controller USB) (Controller USB-
(see graphic
PRO)
below)

White +12V / +24V

Black COM

Brown 1 1

Red 2 2

Orange 3 3

Yellow 4 4

Green Relay 1 COM Relay 2 COM

Blue Relay 1 NO Relay 2 NO

Gray Relay 2 COM Relay 3 COM

Purple Relay 2 NO Relay 3 NO

Note: For the Controller USB-PRO only, connect the red jumper wire from + COM A to +24V
Power Output.

1
4

3
2

4 Cat No. N101931 Rev. A

You might also like