You are on page 1of 2

TABLE OF CONTENT

ABSTRACT
(Abstract should be organized around three chapters; The motive of the work as first
paragraph, how the work was realized second paragraph, and the results obtained that justify
the intent of the research)

CHAPTER ONE: INTRODUCTION


1.0 Introduction (This introduction should be captivating to the reader)
1.1 Problems/Reasons why the research is necessary (Problem Statement)
1.2 Aim(s)
1.3 Objectives
1.4 Scope (scope defines the extent of coverage of the research work)
1.5 Report Presentation outlined (summarizes what other chapters in the report contains)

CHAPTER TWO: LITERATURE REVIEW


2.0 Introduction (This introduction is not like that of chapter one. It gives insight to what
will be discussed in the chapter)
2.1 Review of related work/studies concerning the topic under consideration (references
must be cited in the text)
2.2 Background literatures of project under consideration (every other theory (with
citations) that we need to know which is relevant and helpful to the pursuit of this research
work)
2.3 And any other theory that is relevant to the topic
.
.

CHAPTER THREE: DESIGN ANALYSIS OF ..


3.0 Introduction. (This introduction gives insight to what will be discussed in the chapter)
3.1 Design considerations and specifications
3.2 Design analysis of each components of the system (excluding theoretical
explanations)
3.3 Flowchart of the microcontroller program (for those working on microcontroller-
based projects)
3.4 Principle of operation of the working circuit (includes the complete circuit diagram)

CHAPTER FOUR: Construction, Testing, and Results


4.0 Introduction (This introduction gives insight to what will be discussed in the chapter)
4.1 Construction (casing layout and dimension, casing material, As-built pictures of
constructed work)
4.2 Testing (what did you test for, and why? How did you connect your meter during
testing?)
4.3 Results (results obtained from the tests carried out)
4.4 Bill of Engineering Measurement and Evaluation

CHAPTER FIVE: CONCLUSION AND RECOMMENDATION(S)


5.0 Introduction (This introduction gives insight to what will be discussed in the chapter)
5.1 Conclusion
5.2 Recommendation(s) (for further work)
REFERENCES

APPENDIX (All data sheets of major components used must be attached as appendix)

Note: all text written in green letters are not part of the table of content. They are written
clarity. If you are not still clear on any point, see me in my office.)

You might also like