Professional Documents
Culture Documents
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____
Sample Sample Sample Sample Sample
S.No DESCRIPTION Notation - Units
1 2 3
1 Item of Work BITUMINOUS MACADAM (Grading 2)
2 Date
3 Location
4 Weight of Empty Measuring cup W1 gm
5 Wt. of Empty measuring cup + Wt. of Aggregate
(passing 12.5 mm & retaining on 10 mm sieve ) W2 gm
6 Wt. of Aggregate
(passing 12.5 mm & retaining on 10 mm sieve ) (W2-W1)=W3 gm
7 Wt. of Impacted Aggregate W4 gm
8 (Wt.
retained on 2.36
of Fines mm )2.36 mm sieve )
(passing (W3-W4)=W5 gm
9 A. I. V. 100*W5/W3 %
10 Remarks
Name of Work :- _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____ _____
1 2 3 4 4
1 Item of Work. BITUMINOUS MACADAM (Grading 2)
2 Date.
3 Weight of Cone + Full of Sand ( 600 - 1000 ). W1 gm
4 Weight of Cone + Balance Sand after pouring (On Plain surface/ glass). W2 gm
5 Weight of SAND in Cone Only. (W1-W2)=W3 gm W4 in finding density of SAMPLE
6 Weight of Cone + Full of Sand ( 600 - 1000 ) W4 gm Must be equal to W1.
7 Weight of Cone + Balance Sand after pouring (In to calibrating cylinder) W5 gm
8 Weight of Sand in Calibrating Cylinder. (W4-W5-W3)=W6 gm
9 Internal diameter of CALIBRATING Cylinder. d cm
10 Internal depth of CALIBRATING Cylinder. h cm
11 Volume of CALIBRATING Cylinder. /4*d*d*h=V cc cc = cubic centimeter.
12 Density of SAND. W6/V = gm/cc 1 in finding density of SAMPLE
IN-SITU DENSITY BY "SAND REPLACEMENT" METHOD
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____ _____ _____ _____
Item of Work ::
Density of Sand 1 ( gm/ cc) :: Wt. of Cone of Sand W4 (gm) ::
1 2 3 4 4 4 4
F.I + E.I= pc
AEE/ DEE/
Data Sheet for Sieve Analysis of Aggregate ( IS : 2386 Part - 1 )
BITUMINOUS MACADAM (Grading 2)
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
AEE/ DEE/
AEE/ DEE/
IN-SITU DENSITY BY "SAND REPLACEMENT" METHOD
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____ _____ _____ _____
Item of Work ::
Density of Sand 1 ( gm/ cc) :: Wt. of Cone of Sand W4 (gm) ::
1 2 3 4 4 4 4
AEE/ DEE/
AEE/ DEE/
Aggregate Impact Value [ IS : 2386 (Part-4)]
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____
Sample Sample Sample Sample Sample
S.No DESCRIPTION Notation - Units
1 2 3
1 Item of Work CLOSE-GRADED PREMIX / MIXED SEAL SURFACING (Type A)
2 Date
3 Location
4 Weight of Empty Measuring cup W1 gm
5 Wt. of Empty measuring cup + Wt. of Aggregate
(passing 12.5 mm & retaining on 10 mm sieve ) W2 gm
6 Wt. of Aggregate
(passing 12.5 mm & retaining on 10 mm sieve ) (W2-W1)=W3 gm
7 Wt. of Impacted Aggregate W4 gm
8 (Wt.
retained on 2.36
of Fines mm )2.36 mm sieve )
(passing (W3-W4)=W5 gm
9 A. I. V. 100*W5/W3 %
10 Remarks
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____ _____ _____ _____
Sample
Sample
Sample
Sample
Sample
S.No DESCRIPTION Notation - Units
1 2 3 4 4 4 4 4
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____
Sample
Sample
Sample
Sample
S.No DESCRIPTION Notation - Units
1 2 3 4 4 4 4
AEE/ DEE/
AEE/ DEE/
DENSITY OF SAND & WEIGHT OF CONE OF SAND.
Name of Work :- _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____ _____
1 2 3 4 4
1 Item of Work. COARSE GRADED GRANULAR SUB-BASE (Grading III )
2 Date.
3 Weight of Cone + Full of Sand ( 600 - 1000 ). W1 gm
4 Weight of Cone + Balance Sand after pouring (On Plain surface/ glass). W2 gm
5 Weight of SAND in Cone Only. (W1-W2)=W3 gm W4 in finding density of SAMPLE
6 Weight of Cone + Full of Sand ( 600 - 1000 ) W4 gm Must be equal to W1.
7 Weight of Cone + Balance Sand after pouring (In to calibrating cylinder) W5 gm
8 Weight of Sand in Calibrating Cylinder. (W4-W5-W3)=W6 gm
9 Internal diameter of CALIBRATING Cylinder. d cm
10 Internal depth of CALIBRATING Cylinder. h cm
11 Volume of CALIBRATING Cylinder. /4*d*d*h=V cc cc = cubic centimeter.
12 Density of SAND. W6/V = gm/cc 1 in finding density of SAMPLE
Aggregate Impact Value [ IS : 2386 (Part-4)]
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____
Sample Sample Sample Sample Sample
S.No DESCRIPTION Notation - Units
1 2 3
1 Item of Work SEMI DENSE BITUMINOUS CONCRETE (Grading 2)
2 Date
3 Location
4 Weight of Empty Measuring cup W1 gm
5 Wt. of Empty measuring cup + Wt. of Aggregate
(passing 12.5 mm & retaining on 10 mm sieve ) W2 gm
6 Wt. of Aggregate
(passing 12.5 mm & retaining on 10 mm sieve ) (W2-W1)=W3 gm
7 Wt. of Impacted Aggregate W4 gm
8 (Wt.
retained on 2.36
of Fines mm )2.36 mm sieve )
(passing (W3-W4)=W5 gm
9 A. I. V. 100*W5/W3 %
10 Remarks
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____ _____ _____ _____
Sample
Sample
Sample
Sample
Sample
S.No DESCRIPTION Notation - Units
1 2 3 4 4 4 4 4
1 2 3 4 4 4 4
F.I + E.I= pc
AEE/ DEE/
Data Sheet for Sieve Analysis of Aggregate ( IS : 2386 Part - 1 )
SEMI DENSE BITUMINOUS CONCRETE (Grading 2)
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
AEE/ DEE/
AEE/ DEE/
DENSITY OF SAND & WEIGHT OF CONE OF SAND.
Name of Work :- _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____ _____
1 2 3 4 4
1 Item of Work. SEMI DENSE BITUMINOUS CONCRETE (Grading 2)
2 Date.
3 Weight of Cone + Full of Sand ( 600 - 1000 ). W1 gm
4 Weight of Cone + Balance Sand after pouring (On Plain surface/ glass). W2 gm
5 Weight of SAND in Cone Only. (W1-W2)=W3 gm W4 in finding density of SAMPLE
6 Weight of Cone + Full of Sand ( 600 - 1000 ) W4 gm Must be equal to W1.
7 Weight of Cone + Balance Sand after pouring (In to calibrating cylinder) W5 gm
8 Weight of Sand in Calibrating Cylinder. (W4-W5-W3)=W6 gm
9 Internal diameter of CALIBRATING Cylinder. d cm
10 Internal depth of CALIBRATING Cylinder. h cm
11 Volume of CALIBRATING Cylinder. /4*d*d*h=V cc cc = cubic centimeter.
12 Density of SAND. W6/V = gm/cc 1 in finding density of SAMPLE
Aggregate Impact Value [ IS : 2386 (Part-4)]
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____
Sample Sample Sample Sample Sample
S.No DESCRIPTION Notation - Units
1 2 3
1 Item of Work WET MIX MACADAM
2 Date
3 Location
4 Weight of Empty Measuring cup W1 gm
5 Wt. of Empty measuring cup + Wt. of Aggregate
(passing 12.5 mm & retaining on 10 mm sieve ) W2 gm
6 Wt. of Aggregate
(passing 12.5 mm & retaining on 10 mm sieve ) (W2-W1)=W3 gm
7 Wt. of Impacted Aggregate W4 gm
8 (Wt.
retained on 2.36
of Fines mm )2.36 mm sieve )
(passing (W3-W4)=W5 gm
9 A. I. V. 100*W5/W3 %
10 Remarks
1 2 3 4 4 4 4
F.I + E.I= pc
AEE/ DEE/
Data Sheet for Sieve Analysis of Aggregate ( IS : 2386 Part - 1 )
WET MIX MACADAM
Name of Work :: _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
_____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
AEE/ DEE/
AEE/ DEE/