Professional Documents
Culture Documents
Mechanical
Anchoring
Product Catalogue
Chemical & Mechanical
Anchoring
Product Catalogue
Chemical Anchors Page 4
Introduction 4
Selection Guide 8
Injection Adhesives 10
Epcon C8
Installation Guide 34
No more dust!
No more hole cleaning!
Safe, secure Chemical Anchoring!
www.ramset.com.au
6 www.ramset.com.au 1300 780 063 www.ramset.co.nz
Chemical Anchoring
Ramset System
Dispensing Solutions
Bonding
Fixing Solutions
Rebar Size Range 8a32 10a32 10a40 10a40 10a24 8a32 10a24 10a24 N/A
Optimum Adhesive
Installation 5 a 40 5 a 35 5 a 40 20 a 40 5 a 30 5 a 30 5 a 30 5 a 30 -5 a 35
Temperature (C)
Loading Time
Hours @ 20C 16hrs 3hrs 12hrs 3hrs 50min 50min 50min 50min 20min
Dry or Damp
Loading Time
Hours @ 20C N/A
Flooded or 32hrs 48hrs 85hrs 24hrs 50min 50min 50min 40min
Underwater
Indicative
Load Ranking
(Dry and Damp)
Indicative
Load Ranking
(Flooded & N/A
Underwater)
EPCON EPCON
EPCON EPCON EPCON EPCON EPCON EPCON Drilled holes
Dynamic loading Fire Rated SeismicDynamicDrinking
loading water Fire Cracked
safe
Rated concreteSeismic
Drilled holesDrinking water
safe
Cored holes
Cracked concrete
Flooded holesDrilledOversized
holes holesCored holes
Solid Concrete
Flooded holes Oversized holes Solid Concret
mic loading
Seismic FireDrinking
Rated water
Dynamic loading
Seismic
Cracked concrete
FireDrinking
RatedDrilled
Dynamic
waterholes
loading
Seismic
CrackedCored
concrete
Fireholes
Drinking
RatedDynamic
Drilled
water
Flooded
holes
loading
Seismic
Cracked
holes Cored
concrete
Fire
Oversized
Rated
holes
Drinking
holes
Drilled
Dynamic
waterFlooded
holes
Seismic
Solid
loading
Cracked
holes
Concrete
concrete
Cored
Oversized
Fire
Drinking
holes
RatedDrilled
holes
water
Dynamic
Flooded
holes
Cracked
loading
Solid
Seismic
holes
Concrete
concrete
CoredOversized
Fire
holes
Drinking
Rated
Drilled
holes
Dynamic
water
Flooded
holes loading
Solid
Seismic
Cracked
holes
Concrete
Cored
concrete
Oversized
Fire
holes
Drinking
Ratedholes
Drilled
Dynamic
water
Flooded
holes
Solid
loading
Seismic
holes
Cracked
Concrete
Cored
concrete
Oversized
Fireholes
Drinking
Rated
holes
Drilled
water
Flooded
holes
Solid
Seismic
Cracked
holes
Concrete
Cored
concrete
Oversized
holes
Drinking
holes
Drilled
water
Flooded
holes
Solid
Cracked
holes
Concrete
Cored
concrete
Oversized
holes holes
DrilledFlooded
holes
Solid
holes
Concrete
Cored
Oversized
holes holesFloo
safe safe safe safe safe safe safe safe safe
Seismic
Cracked
ading concrete
FireDrinking
RatedDrilled
Dynamic
waterholes
loading
Seismic
CrackedCored
concrete
Fireholes
Drinking
Rated Drilled
water
Flooded
holesSeismic
Cracked
holes Cored
concrete
Oversized
holes
Drinking Dynamic
holes
Drilled
water loading
Flooded
holes
Solid
Cracked
holes
Concrete Fireholes
concrete
Cored RatedDrilled
Oversized holes
Dynamic
Flooded Seismic
holesloading
Solid
holes
Concrete
Cored Drinking
Oversized
Fire
holes water
Ratedholes
Dynamic
FloodedCracked
loading
Solid
Seismic
holes concrete
Concrete
Oversized
FireDrinking
Ratedholes Damp
Drilled
Dynamic
water holes
holes
loading
Solid
Seismic
Cracked Cored
Concrete Fireholes
concrete
Pull Rated Drilled
Drinking
down Flooded
water to Seismic
holes
Close holes Cored
Cracked Oversized
Drinking
concrete
Pullholes
down holes
water
Drilled
ZINC to Solid
Flooded
holes
Close Cracked
Concrete
holes
Galvanised concrete
Cored
Oversized DrilledFlooded
holesZINCholes
Stainless holesSolid
Galvanisedholes Cored
Concrete holes holesFlooded
Oversized
Stainless holes
Solid ConcreteOversized holes Solid
feature
safe safe safe safe safe safe edge feature safe edge Steel 316 Steel 316
kg kg
king
edDrilled
Dynamic
waterholes
loading
Seismic
CrackedCored
concrete
Fireholes
Drinking
Rated Drilled
water
Flooded
holesSeismic
Cracked
holes Cored
concrete
Oversized
holes
Drinking
holes
Drilled
waterFlooded
holes
Solid
Cracked
holes
Concrete
concrete
Cored HCR
Oversized
holes Drilled
holes Flooded
holesSolid
holes
Concrete
CoredOversized HCR
holes holesFlooded
Solid
holes
ConcreteOversized holes HCR HCR
Solid Concrete
Flooded holes
HCR HCR
Brick &
Hollow Wall HCR
Brick &
Hollow Wall HCR HCR
safe safe safe
se toZINCPull down
Galvanised Close toZINC
Stainless
Pull down
Galvanised Close toZINC
Pull
Stainless
downGalvanisedClose to ZINCStainless
Galvanised CloseZINC
Pull down to Stainless
Galvanised Stainless Galvanised
ZINC Stainless
Pull down Close to ZINC Galvanised Stainless
dge feature kg edge Steel feature
316 kg edge Steel
feature
316 kg edge Steel 316kg
feature edge Steel 316
kg
Steel 316 kg Steel
feature
316
kg
edge
kg
Steel 316
Brick & HCR Brick & HCR Brick & HCR Brick & HCR Brick & Brick & HCR Brick & HCR Brick & HCR Brick & HCR
EPCON Hollow Wall Hollow Wall EPCON Hollow Wall EPCON Hollow Wall Hollow Wall EPCON Solid Concrete EPCON
Hollow Wall Hollow Wall EPCON Hollow Wall EPCON Hollow Wall
Dynamic loading Fire Rated Pull down
Seismic Drinkingtowater Dynamic
nvanised
kg Close toZINC
Stainless
Pull down
Galvanised
kg Close toZINCStainless
Galvanised
kg ZINCStainless
Galvanised
kg Close
safe
PullCracked
downloading
Stainless concrete
kg
Fire
Drilled
Close Rated
holes Dynamic
toZINC Cored
Seismic
Pull down holes
loading
Galvanised
Drinking
Flooded
Fire
Close water
Rated holes
toZINC
safe
PullCracked
Oversized
down
Stainless concrete
Seismic holes Close
Galvanised
Drilled
SolidtoConcrete
Drinking holes Dynamic
water
ZINC Cored
loading
Cracked
Stainless holes
concrete
Galvanised
kg
Fire
Flooded
Rated
Drilled holes Dynamic
ZINC
holes Oversized
Seismic
loading
Cored
Stainless holes Drinking
holes
Galvanised
Fire
Solid
Rated
Flooded
safe
water
ConcreteDynamic
Cracked
Stainless
holes Seismic
loading
concrete
Oversized holes Drinking
Fire
Drilled
Rated
Solid
safe
water
holes
ConcreteDynamic
Cracked
Cored
Seismic
loading
concrete
holes Drinking
Fire
Drilled
Flooded
Rated
safe
water
holes
holes Cracked
Oversiz
Cored
Seismc
feature edge safe
edge Steel feature
316 edge Steel 316 Steel 316 Steel
feature
316 edge feature edge Steel feature
316 edge Steel 316 Steel 316 Steel 316
Damp holes Damp holes Damp holes Damp holes Damp holes Damp holes Damp holes Damp holes
ON Brick &
Hollow Wall
HCR Brick &
Hollow Wall
HCR Brick &
Hollow Wall
HCR Brick &
Hollow Wall
HCR Brick &
Hollow Wall
Brick &
Hollow Wall HCR HCR
Brick &
Hollow Wall
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete
Pull down Close to Hollow applications
safe Pull down ZINC Galvanised
Close to Stainless ZINC
Galvanised Stainless
ZINC
Stainless
Pull down
Galvanised
kg Close toZINC Stainless
Galvanised
kg ZINCStainless
Galvanised Stainless kg kg feature edge kg feature edge kg Steel 316 Steel 316
esSteel
feature
316 edgeholes Steel 316 Steel 316 Steel 316
HCR BrickAnchoring
Damp
Hollow applications Damp
Hollowholes
applications Damp holes
Hollow applications Hollow applications
Damp holes Hollow applications Hollow applications Hollowholes
Damp applications Hollow applications Hollow applications
& HCR Brick & HCR Brick & HCR HCR Brick & HCR Brick & Brick & Brick & HCR
Environment
Hollow Wall Hollow Wall Hollow Wall Hollow Wall kg Hollow Wall kg
Hollow Wall Hollow Wall
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete Brick &
Brick &
down
alvanised CloseZINC
toStainless
PullGalvanised
down CloseZINC
toStainless
PullGalvanised
down Close
safe ZINC
toStainless Galvanised ZINC
Stainless Galvanised Stainless
Pull down Close to Dynamic loading
Hollow Wall ZINC Hollow Wall
Galvanised Stainless
ure edgeSteel 316 feature
kg edgeSteel 316 feature edgeSteel 316 Steel 316 Steel 316feature edge Steel 316
Hollow applications Hollow applications Hollow applications Hollow applications Hollow applications Hollowholes
applications Hollow applications
rick &
Damp holes
Brick &
Damp holes
Brick & EPCON Damp holes
EPCONDamp holes Damp holes
Damp
Damp holes
Damp holes
Pull down Close to kg ZINC Galvanised Stainless Pull down Close to Pull down Close
ZINCto Galvanised Stainless
ZINC Galvanised Stainless
Damp holes Hollow applications feature edge Hollow applications
feature edge Steel 316
Hollow applications Steel 316 Hollow applications Hollow applications Hollow applications
feature edge Steel 316
8 www.ramset.com.au
Brick &
Hollow Wall HCR 1300 780 063 Cracked concrete
HCR
Selection Guide
Key to Selection Table
Load Ranking indicates load capacity relative to other Ramset Chemical Anchoring adhesives. For load design Refer to Ramset Specifiers Resource Book
Holes drilled with carbide bit and dust removed in accordance with steps 1 to 4 on page 35.
Drilled holes
Holes drilled with diamond core bit dust removed in accordance with steps 1,2 & 3 on page 35.
Cored holes
Damp holes
Water in Holes and not removed or water in holes for greater than 24 hours even if the water is
removed.
Flooded holes
Solid Concrete. All Ramset Chemical Anchoring adhesives are recommended for solid concrete
Solid Concrete
Suitable for installation in hollow clay brick and hollow concrete block in conjunction with perforated
sleeves & sieves. See pages 30 & 37
Hollow applications
Certified for load performance in tension zones and other cracked concrete applications.
Refer to Ramset Specifiers Resource Book
Cracked concrete
ETA
C8 -450
Epcon C8 is a high performance pure epoxy that meets the highest Advantages
international anchoring standards such as seismic and cracked
High load performance, versatile Pure Epoxy Chemistry
concrete. Independently tested and assessed for 100 year design life
under sustained loading means peace of mind for design engineers 100 year design life in sustained loading
and building contractors alike. Seismic Design Approved
Versatile Epcon C8 is suitable for extreme anchoring environments Cracked concrete and Tension zone approved
including core drilled holes, oversized diameters, flooded conditions Suitable for Flooded Holes, Oversized diameter, Core drilled holes
and underwater. Easy cold weather dispensing epoxy
Epcon C8 is ideal for applications requiring the highest bond Fire Rated for Rebar applications
strength and security. Certified for contact with Drinking water
Epcon C8 is suitable for use in a wide range of climate conditions. Electrical Insulator
It is easy to dispense in cold weather and its long working time is
ideal for deep embedment or hot climates. Typical Applications
Seismic Upgrade of concrete structures
Tunnel smoke ducts and corbells
Bridge construction and structural upgrades
Road and rail construction
Water infrastructure
Approvals
Certification Approval Number / Report Number
European Technical Approval ETAG 001-5 Option 1 ETA 10/0309
European Technical Approval ETAG 001-5 Option 1 ETA 07/0189
CSTB Fire Test Report to ISO834 26007642/b
DIBt Report Z-21.8-1866
WRAS Approval Contact with Drinking Water BS6920 MAT/LAB 622A
CSTB Seismic Applications Report 3/12-727
Bureau Veritas Electrical Resistance Test Report to CEI 60093 Nr 6010-1845
100 Year Design Life Swinburne University Report 5 September 2013
Hole
Condition
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete
safe
Injection Adhesives
Anchoring
EPCON
Rebar Size Range - 8 to 32 Environment
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored h
safe
45
40
Installation Range
35
Adhesive Substrate
30
Temperature
25
5C to 40C 5C to 40C HC
20
kg
Range
15
10
Brick &
Hollow Wall Pull down Close to ZINC Stainless
Galvanised
feature edge Steel 316
HCR
HCR
Damp holes
BrickBrick
& & Brick &
10 to 19C 14 min 23holes
Damp hours Hollow
Hollow WallWall 46 hours
Hollow Wall
Hollow applications
AU
ONLY
Key Features
Pure Epoxy
High bond Strength
Submerged Application
VmOpliCant
Injection Adhesives
Co
Tolerant of various
hole conditions
Quick 3 hour loading (REO502)
NEW
HIGH
PERFORMANCE
CARTRIDGE
Reo 502 is a high performance pure epoxy that provides high load Advantages
capacity combined with tolerance to adverse anchoring environments
High load performance
including core drilled holes, oversized diameters, flooded conditions
and underwater. Versatile Pure Epoxy Chemistry
One product for all anchoring environments simplifies product Suitable for Flooded Holes, Oversized diameter, core drilled holes
selection. and underwater
Reo 502 is available in two versions; Reo 502 EF for easy Quick 3 hour loading time @ 20C (Reo 502)
dispensing in cold conditions and standard Reo 502 with quick 3 Easy cold weather dispensing epoxy (Reo 502 EF)
hour setting. Long working time for deep embedment
Certified for repeated loading for 3 million cycles
Electrical insulator (non-conductive)
Typical Applications
Post - installed reinforcing bar connections for concrete walls,
columns and beams
Structural steel connections
Timber frame tie down per AS1684.2-1999
Starter Bars
Approvals
Certification Approval Number / Report Number
Repeated load AS1085.19 3 million Cycles
Hole
Condition
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete
Rebar Size Range - 10 to 40 safe
Injection Adhesives
Anchoring
EPCON Environment
Threaded Bar Size Range - M8 to M36 Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored h
safe
Substrates
REO502
EPCON EPCON
50
EPCON HCR
45
40
Installation
35
Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete
Adhesive Substrate
30
safeTemperature
25
Dynamic
Dynamic loading Fire Rated
loading Fire Rated Seismic Drinking
Seismic Drinking water Cracked
Cracked concrete Drilled
Drilled holes Cored Cored holes Flooded
Dynamic loading Fire Rated water Seismic concrete
Drinking water holes Cracked concreteholes Drilled Flooded
holes holes
20C to 40C 5C to 40C
20
safe
Max
10
Pull down 5
Close to ZINC Galvanised Stainless
Steel 316 Long Term:
0
45
REO502EF Temperature
Range
40
Installation
35
Adhesive Substrate
30
Temperature HC
25
kg
5C to 40C 5C to 30C
20
Range
15
10
Brick &
Hollow Wall Pull down Close to ZINC Stainless
Galvanised
feature edge Steel 316
HCR
HCR
Damp holes
HCR
Working and Loading Times PullPull
down down
feature
feature
Close
Close tokg to
Pull down
edgeedge feature
Close to ZINCZINC Galvanised Stainless
Galvanised ZINCStainless
Galvanised
SteelSteel
316316
Stainless
edge Steel 316
Reo 502 Reo 502 EF
ZINC Galvanised Stainless Brick &
Substrate Steel 316 Hollow
Timeapplications
to Full Load Capacity Hollow
TimeWall
to Full Load Capacity
Temperature Working Time Working Time
Dry and Damp Flooded and kgkg
kg Dry and Damp Flooded and
Underwater BrickBrick
& &
Underwater
Damp holes Brick &
Hollow
Hollow WallWall Hollow Wall 240 hours
5C - - - 32 min 96 hours
10C 27 min 8 hours 48 hours 22 min 48 hours 160 hours
Brick & Damp
Damp holesholes Damp holes
Hollow Wall 15C 23 min 5 hours 32 hours 17 min 22 hours 115 hours
Hollow applications
20C 20 min 3 hours 24 hours 13 min 12 hours 85 hours
25C 12 min 2.5 hours 15 hours - -
Hollow applications
-
Hollow applications Hollow applications
30C 8.5 min 2 hours 12 hours 8.5 min 6 hours 48 hours
Hollow applications
NZ
ONLY
Key Features
Pure Epoxy
High bond Strength
Submerged Application
VmOpliCant
Injection Adhesives
Co
Tolerant of various
hole conditions
Quick 3 hour loading
ISNE C6EF-600
Hole
Condition
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete
Rebar Size Range - 10 to 32 safe
Injection Adhesives
Substrates
EPCON
EPCON EPCON
Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete
safeThreaded Bar Size Range - M8 to M24 Dynamic
Dynamic loading Fire Rated
loading Fire Rated Seismic Drinking
Seismic
Dynamic loading
Drinking water Cracked
Fire Rated water Seismic
Cracked concrete Drilled
concrete Drilled holes Cored
Drinking water holes
Cored holes Flooded
Cracked concreteholes Drilled Flooded
holes holes
safe safe safe
Max
Long Term: Short Term:
Operating -40C 50C 80C
Temperature
Range
50
45
40
Epcon C6EF HCR
Installation
35
Adhesive Substrate
30
Temperature
25
5C to 35C 5C to 30C
20
Range
15
5
Galvanised
feature edge Steel 316
0
HCR
HCR
BrickBrick
& & Brick &
Damp holes Hollow
Hollow WallWall Hollow Wall
AU
ONLY FAST SETTING
HEAVY DUTY
Key Features
Fast Setting VmOpliCant
Co
Injection Adhesives
Heavy Duty
Ideal for wall frame tie down
ChemSet 801 is a heavy duty vinyl ester that sets fast for high Advantages
productivity.
Heavy duty load performance
Fast setting makes ChemSet 801 ideal for applications requiring
Fast setting
fast installation such as hand rails, structural steel, timber frame hold
down, shelf angles etc Suitable for core drilled holes
Easy cold weather dispensing
Typical Applications
Timber frame tie down per AS1684.2-1999
Corrrosion resistant applications ( water treatment, Industrial)
Fabricated steel (Handrails, Sign posts, Safety rails, Structural
Steel)
Approvals
Certification Approval Number / Report Number
AS/NZS4020 Contact with Drinking Water AWQC 85026
Injection Adhesives
Hollow applications
Anchoring
EPCON Environment
Rebar Size Range - 10 to 24
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Co
safe
Substrates
Threaded Bar Size Range - M8 to M24
EPCON EPCON
EPCON HCR
Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete
safe Dynamic
Dynamic loading Fire Rated
loading Fire Rated Seismic Drinking
Seismic Drinking water Cracked
Cracked concrete Drilled
Drilled holes Cored Cored holes Flooded
Dynamic loading Fire Rated water Seismic concrete
Drinking water holes Cracked concreteholes Drilled Flooded
holes holes
safe safe safe
Pull down Close to ZINC Galvanised Stainless Max
feature edge Steel 316 Long Term: Short Term:
Operating
-40C 50C 80C
50
45 Temperature
Range
40
Installation
35
Adhesive Substrate
30
Temperature HCR
25
5C to 30C 0C to 40C
20
kg
Range
15
10
Brick &
0
HCR
HCR
Working and Loading HCR
Damp holes
Times
PullPull
down down Close
Close to to
Pull Time ZINCZINC Galvanised
Galvanised Stainless
ZINCStainless
kg
feature
feature
down
edgeedge feature to Full
Close toLoad Capacity Galvanised
SteelSteel
316316
Stainless
Substrate Temperature Working Time edge Steel 316
ZINC Galvanised Stainless Brick & Dry and Damp Flooded and Underwater
Steel 316 Hollow applications Hollow Wall
5C 18 min 145 minutes -
kg kg
kg
Hollow
Hollow applications
applications Hollow applications
CRACKED CONCRETE
Key Features CERTIFIED
Cracked Concrete Cerfified Structaset 401
ETAG-001-5 Option 1
Injection Adhesives
VmOpliCant
Co
StructaSet 401 is a heavy duty, fast setting Epoxy Acrylate certified Advantages
for challenging engineering designs such as cracked concrete,
Certified High load performance
tension zones, sustained loading applications.
50 year design life in sustained load applications
Ideal for structural steel, hand rails, balustrades, mechanical services,
road stitching, starter bars etc Certified for Cracked Concrete and Tension zones
Suitable for flooded and core drilled holes
Fast setting for high productivity
Easy cold weather dispensing
Certified for contact with drinking water
EPCON
Typical Applications Dynamic loading Fire Rated Seismic Drinking water
safe
Cracked concrete
Approvals
Pull down Close to ZINC Galvanised
Certification Approval Number / Report Number feature edge
Brick &
AS/NZS4020 Contact with Drinking Water AWQC 77922 Hollow Wall
Hollow applications
Damp holes
Hollow applications
Hole
Condition
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete
safe
Injection Adhesives
Anchoring
EPCON EPCON Environment
Rebar Size Range - 8 to 32
Dynamic loading Fire Rated Seismic
Dynamic loading Drinking water
Fire Rated Cracked concrete
Seismic Drilled holes
Drinking water Cored concrete
Cracked holes Flooded holes
Drilled holes Oversized
Cored h
safe safe
Substrates
EPCON EPCON
Threaded Bar Size Range - M8 to M30
EPCON HCR
Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete
safe Dynamic
Dynamic loading Fire Rated
loading Fire Rated Seismic Drinking
Seismic
Dynamic loading
Drinking water Cracked
Fire Rated water Seismic
Cracked concrete Drilled
concrete Drilled holes Cored
Drinking water holes
Cored holes Flooded
Cracked concreteholes Drilled Flooded
holes holes
safe safe safe
Pull down Close to ZINC Galvanised Stainless Max
feature edge Steel 316 Long Term: Short Term:
Operating
-40C 50C 80C
50
45 Temperature
Range
40
Installation
35
Adhesive Substrate
30
Temperature HCR HC
25
5C to 30C 0C to 40C
20
kg
Range
15
10
Brick &
0
Hollow
Pull Wall
down Close to Pull down ZINCto
Close Stainless
ZINC Stainless
Galvanised Galvanised
feature edge feature edge Steel 316 Steel 316
HCR
HCR
Damp holes
Hollow
Hollow applications
applications Hollow applications
ETA
in solid concrete
Injection Adhesives
Not just any polyester; Chemset 101 Plus is formulated using high Advantages
performance, Marine Grade Polyester Resin. The European Technical
Superior Marine Grade Polyester
Approval certification provides peace of mind that Chemset 101 Plus
will deliver what it promises: High Quality, consistent Load Capacity, Suitable for flooded holes
even in flooded holes Hollow Brick and Concrete Block
(See page 28 for perforated sleeves)
Solid Concrete
Styrene Free
Easy cold weather dispensing
Independent Certification
Fast Setting for High Productivity
Marine Grade Polyester
- 100% Bond Strength in Flooded Holes
- Resistant to alkaline environments
Thixotropic, non-sag formula for overhead and horizontal applications
Easy dispensing in cold climates
EPCON
Ideal for hollow substrates (withDynamic
accessories)
loading Fire Rated Seismic Drinking water Cracked concrete D
safe
Typical Applications
Fabricated steel (Handrails, Sign posts, Safety rails )
Gates, Fence posts, Rails to hollow brick and Block
Starter bars
Approvals
Pull down Close to ZINC Galvanised S
Certification Approval Number / Report Number feature edge S
Brick &
Hollow Wall
Damp holes
HCR
Hole
Condition
Pull down Close to ZINC Galvanised Stainless
Dynamic loading Dynamic
Fireloading
Rated Seismic
Fire Rated Drinking
Seismic water feature
Crackedwater
Drinking concreteCracked
Drilled
edge holes
concrete Cored
Drilled holes
holes Flooded
Cored holesholes Oversized
Flooded holesholes Steel
Solid
Oversized
316Concrete
holes Solid Concrete
safe safe
Injection Adhesives
kg
Anchoring
Rebar Size Range - 8 to 24
EPCON Environment Brick &
Hollow Wall
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored h
safe
Damp holes
45
Temperature
Range
40
Installation
35
Adhesive Substrate
30
Temperature HC
25
kg
5C to 30C
kg
0C to 40C
20
Range
15
10
HCR
HCR
Damp holes Damp holes
HCR
Working and Loading Times PullPull
down down
feature
feature
Close
Close tokg to
Pull down
edgeedge feature
Close to ZINCZINC Galvanised
edge
Stainless
Galvanised ZINCStainless
Galvanised
SteelSteel
316316
Stainless
Steel 316
ZINC Stainless
GalvanisedTemperature
Time to Full Load Brick
Capacity
&
Substrate Steel 316 HollowWorking
applications Time
Hollow applications Hollow Wall
Dry and Damp Flooded and Underwater
kg kg
kg
5C 18 min 145 minutes 145 minutes
BrickBrick
& & Brick &
Damp holes
10C 10 min 85 minutes Hollow
Hollow WallWall 85Hollow
minutes
Wall
For drilling dimensions and full Installation details, refer page 34. In hollow substrate, refer page 37
NOTE: Load Index is the relative load compared with other Chemical Anchoring products in the Ramset range and is intended to assist with product selection. Load Index is not intended to assist with load
design. For load capacity and design information, consult the Ramset Specifiers Resource Book available from Ramset in hard copy or download from the website
ETA
Key Features
Epcon C8
VmOpliCant
ETA ETA
HIGH PERFORMACE
Injection Adhesives
ETAG-001-5 Option 7
Structaset 401 Chemset Maxima
UFP300P
Approvals
Pull down Close to ZINC Galvanised St
Certification Approval Number / Report Numberfeature edge Ste
Brick &
Hollow Wall
Damp holes
Hollow applications
UltraFix Plus
Now Approved for Flooded holes!
HCR
Hole
Condition
Pull down Close to ZINC Galvanised Stainless
Dynamic loading Dynamic
Fireloading
Rated Seismic
Fire Rated Seismic water feature
Drinking Crackedwater
Drinking edge
concreteCracked
Drilled holes
concrete Cored
Drilled holes
holes Flooded
Cored holesholes holesholes Steel
Oversized
Flooded 316
Solid
OversizedConcrete
holes Solid Concrete
safe safe
Injection Adhesives
kg
Anchoring
Rebar Size Range - 8 to 24
EPCON Environment
Brick &
Hollow Wall
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored h
safe
Damp holes
45
40
Installation Range
35
Adhesive Substrate
30
Temperature
25
5C to 30C 0C to 40C HC
20
Range kg kg
15
10
HCR
HCR
Damp holes Damp holes
HCR
PullPull
down down Close
Close tokg to
Pull down Close to ZINCZINC Galvanised Stainless
Galvanised ZINCStainless
Galvanised Stainless
Working and Loading Times
feature
feature edgeedge feature edge SteelSteel
316316 Steel 316
ZINC Galvanised Stainless Brick &
Steel 316 Hollow applications
Hollow applications Time to Full LoadHollow
Capacity
Wall
Substrate Temperature Working Time
Dry and Damp
kg kg
kg Flooded and Underwater
BrickBrick
& &
5C 18 min 145holes
Damp minutes Hollow
Hollow WallWall 145 minutes
Brick &
Hollow Wall
10C 10 min 85 minutes 85 minutes
Brick & 20C 6 min 50 minutes
Damp
Damp holesholes 50 minutes
Damp holes
Hollow Wall
25C 5 min 40 minutes 40 minutes
Hollow applications
Hollow applications
For drilling dimensions and full Installation details, refer page 34. In hollow substrate, refer page 37
*NOTE: Load Index is the relative load compared with other Chemical Anchoring products in the Ramset range and is intended to assist with product selection. Load Index is not intended to assist with load
design. For load capacity and design information, consult the Ramset Specifiers Resource Book available from Ramset in hard copy or download from the website
NO MIXING NO MESS
NO WASTE
Epcon C8
ETA
VmOpliCant
ETA
Key Features Co
Anchoring Capsules
1 capsule = 1 fixing
ETA 10/0309 0679-CPD-0549 ETA 07/0189 0679-CPD-0276
European Technical Approval
ETAG-001-5 Option 7
ETA 13/0778 ETA 03/0008 0679-CPR-0011
CERTIFIED
Chemset 101 Plus & UltraFix Plus
DESIGN LIFE
Maxima glass capsules are the ideal solution for jobs with only a Advantages
few fixings where an injection product would be wasted. Maxima
The ideal overhead solution
glass capsules non-sag and rapid setting features make them the
best solution for anchoring overhead and in soffit. Certified High load performance
The glass breaks during installation and scours the walls of the One capsule = one fixing = no waste
borehole to create a strong secure bond in adverse conditions such 50 year design life in sustained load applications
as improperly cleaned, core drilled or flooded holes. They can even Suitable for flooded and core drilled holes
be installed underwater.
Rapid setting for high productivity
Maxima capsules are certified for 50 year design life under
sustained loading. Typical Applications
Ideal for structural steel, hand rails, balustrades, cable trays, Fabricated steel connections ( Hand rails, Gates, Fence posts,
mechanical services, Balustrade posts)
Structural Steel connections
EPCON
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete D
safe
Approvals
Pull down Close to ZINC Galvanised S
Certification Approval Number / Report Number feature edge S
Brick &
Hollow Wall
Damp holes
Hole
Condition
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded holes Oversized holes Solid Concrete
Anchoring Capsules
safe
Anchoring
Rebar Size Range - N/A
EPCON Environment
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored h
safe
45
40
Installation Range
35
Adhesive Substrate
30
Temperature
25
Range kg
15
10
Brick &
Hollow Wall Pull down Close to ZINC Stainless
Galvanised
feature edge Steel 316
HCR
HCR
Damp holes
BrickBrick
& & Brick &
0 to 10C - 60holes
Damp minutes Hollow
Hollow WallWall 120 minutes
Hollow Wall
Hollow
Hollow applications
applications Hollow applications
For drilling dimensions and full Installation details, refer page 34.
*NOTE: Load Index is the relative load compared with other Chemical Anchoring products in the Ramset range and is intended to assist with product selection. Load Index is not intended to assist with load
design. For load capacity and design information, consult the Ramset Specifiers Resource Book available from Ramset in hard copy or download from the website
Key Features
Grade 5.8 Carbon Steel
42um Hot Dip Galvanised
AISI 316 Stainless Steel
Materials
5.8 5.8
ZINC ZINC
ZINC ZINC
Galvanised Stainless
Galvanised Carbon
StainlessSteel Carbon Steel
Electroplated Electroplated
Electroplated Electroplated Steel 316 Steel 316
ChemSet Anchor Studs are made from Grade 5.8 carbon steel to Advantages
get the most out of adhesive tensile capacities and provide higher
High Performance Grade 5.8 Carbon Steel
shear capacities than regular Grade 4.6 grade studs. Galvanising of
ChemSet Anchor Studs meets Australian Standards. Stainless Steel Hot dip galvanised to AS1650 and AS1214
ChemSet Anchor Studs are high corrosion resistant AISI 316 (A4). Hot dip galvanised to 42 micron for exterior applications
External hex drive avoids jamming common with hex bar driven studs. High Performance AISI316 Stainless Steel for Coastal Applications
External hex does not collect rainwater leading to accelerated Pre-cut to standard chemical anchoring lengths
corrosion in internal hex drive. Supplied with nuts and washers
Depth set mark to ensure correct embedment
Reliable external hex drive for installing capsules
Ramset Quality
Materials
5.8 5.8
ZINC ZINC ZINC
Galvanised ZINC
Stainless Carbon Steel
Galvanised Stainless Carbon Steel
troplated Electroplated Electroplated Electroplated
Steel 316 Steel 316
Advantages
Internally threaded steel inserts are for use with Epcon C8, Epcon
Flush with concrete surface
C6EF, ChemSet Reo502 and StructaSet401 adhesives.
Available in zinc plated carbon steel or high corrosion resistant AISI Variable bolt head finish options
316 (A4). Ideal for applications where a bolt finish is required. Bolt is removable
No trip hazard
Typical Properties Shallow embedment
500 MPa Carbon Steel
Steel Grades
AISI 316 (A4) Stainless Steel
Threaded Inserts
Drilling Dimensions
Thread 5.8 5.8
Description Box Quantity
Size Diameter (mm) Depth (mm) ZINC ZINC ZINC ZINC Galvanised GalvanisedStainlessStainless
Carbon Steel
Carbon Steel
Electroplated Electroplated
Electroplated Electroplated Steel 316Steel 316
Typical Properties
Carbon Steel Stainless Steel
Overall Length, Effective Length, Thread Length, Tensile Yield UTS, fu UTS, fu
Thread Size Yield Strength, fy
L (mm) Le (mm) L2 (mm) Strength, fy (MPa) (MPa
(MPa)
(MPa)
M8 60 60 25 420 520 350 650
M10 65 65 32 420 520 350 650
M12 75 75 38 420 520 350 650
M16 125 125 50 420 520 - -
M20 170 170 63 420 520 - -
Key Features
Non- destructive
Corrosion resistant
Fast installation
Materials
Nylon
Installation
1. Drill a 12 mm diameter hole in solid brick using a masonry drill bit
all the way through the nearest brick and maximum 70 mm into
the second brick
3. Insert outer sleeve through first brick into the second until it
reaches the back of the hole
5. Insert the wall tie plunger into the outer sleeve all the way in
6. Adhesive will cure and hold the two brick leaves together
EPCON
ChemSet Anchor Fixings
Dynamic loading Fire Rated Seismic Drinking water Cracked concrete Drilled holes Cored holes Flooded
safe
Key Features
Secure fixing to hollow
substrates, Extruded Clay Brick,
Hollow Concrete Block
Materials HCR
Dosing Cap
Description To Suit Hole Diameters Part Number Pack Quantity
Dosing Cap 15, 18, 20, 25, 30, 40 mm 050969 5
Overhead Retaining
Overhead retaining collars enable threaded studs to remain in place when installed overhead (see page 34.)
Twin drive for powerful dispensing Reduces fatigue when dispensing a large number of cartridges
18V fits Ramset cordless power tools
CUAP CUAR18
Key Features
Robust All Metal design
Dispenses all products in the 450ml Epcong range Part No. CUAPN
SO55838
ISNP AU
ONLY
ISNE
SO55837
Description Compatible With Part Number Min Hole Diameter Max Hole Depth
AU
ONLY Epoxy Mixing Nozzle
C8-450, C801C,C801J, REO502J600,
ISNE 10mm
240mm
RE502EF600 (425mm extension)
HI Flo Nozzle C8-450, REO502J600, RE502EF600 S055837 22mm 190mm
Description Compatible With Part Number Min Hole Diameter Max Hole Depth
NZ
ONLY Epoxy Mixing Nozzle
C8-450, C6EF-600, S401, ISKP,
ISNE 10mm
240mm
UFP300P (425mm extension)
HI Flo Nozzle C8-450, C6EF-600 S055837 22mm 190mm
Installation Details Threaded Bar and ChemSet Anchors Studs in Solid Concrete
Refer to Engineers drawings for specified dimensions. In the absence of Engineer specification, the following dimensions are required.
Refer to Ramset Specifiers Anchoring Resource Book for load design (Available from Ramset or the website www.ramset.com.au)
Minimum Minimum Minimum
Drill Hole Maximum Maximum
Drill Hole Size, Tightening Edge Anchor Structural
Depth Fixture Fixture
Thread Size dh Torque, Tr Distance, Spacing, Thickness,
in Substrate Clearance Thickness
(mm) (Nm) ec ac bm
(mm) (mm) (mm)
(mm) (mm) (mm)
M8 10 80 10 15 10 35 50 100
M10 12 90 12 25 20 40 60 120
M12 14 110 15 30 40 50 75 140
M16 18 125 20 40 95 65 100 160
150 190
M20 24 24 80 180 80 120
170 220
160 200
M24 26 28 105 315 100 145
210 270
M30 32 270 32 - 650 120 180 300
M36 38 330 38 - 1150 145 220 365
Table 2. Chemical Anchor Installation Details for Threaded Bar and ChemSet Anchor Studs in solid Concrete
7
not carry full load capacity until concrete is at least 28 days old.
Threaded rod must have one end cut at approximately 45 to prevent unthreading
from the cured adhesive
Brick &
Hollow Wall
Hollow applications
HCR
HCR
down
down toto
Close
Close ZINC
ZINC Galvanised
Galvanised Stainless
Stainless www.ramset.co.nz 0800RAMSET (726739) 35
ure
ature edge
edge Steel
Steel316
316
Installation Instructions
Chemical Anchors Solid Concrete
1. 2. 3. 4. 5.
Installation Guide
6. 7.
1. Remove cap from cartridge and attach mixing nozzle. Refer to product 5. Insert fixing using a twisting / rotating motion into adhesive and wipe away
label for correct part number. any excess.
2. Load cartridge into dispensing gun (Ramset Part Numbers CUAP (Manual), 6. Allow adhesive to cure. Refer to product label or product pages in this
E108 (Manual), CUAPN (Pneumatic) and CUAR18 (18V Battery Powered) book or Technical Data Sheets for curing times at various temperatures.
3. Dispense a small quantity of adhesive (2 to 3 trigger pulls) to waste to 7. Load anchor and apply torque (to threaded fixings) after appropriate cure
ensure both adhesive components are balanced. time.
4. Insert mixing nozzle tip to bottom of hole (to avoid air bubbles) and inject
Avoid trapping air bubbles. Air bubbles reduce the bonded
adhesive. Gradually withdraw nozzle to keep the nozzle tip at the surface
area resulting in a lower load capacity
of the adhesive Continue injecting until hole is about filled.
Deep Embedment 1. 4.
For deep holes up to 425 mm, use an extension tube (included with ISNE
mixing nozzles).
For holes deeper than 425mm, use flexible pvc tube with a Ramset Dosing
Cap (Part Number 050969).
1. Break off larger discs from Dosing 5. Insert rod or bar with a twisting /
5.
Cap to obtain the correct diameter rotating motion. Wipe away any
2. Measure depth of hole. excess adhesive.
3. Attach dosing cap to end of 6. Load anchor and apply torque (to
extension tube. Measure and threaded fixings) after appropriate
mark half the hole depth on the cure time.
2. 6.
extension tube.
4. Insert extension tube to end of
hole and inject adhesive. Adhesive
in the hole will apply force to the
disc, pushing it back. Stop injecting
when mark on tube appears. 3.
Overhead Installation
Note: Dustless carbide system is recommened to eliminate falling dust and debris during overhead drilling.
Select correct retaining collar from page 31 for M12 and M16 threaded rod. For other threaded rod sizes and rebar, use plastic wedges after the anchor has
been installed.
1. Insert mixing nozzle tip to bottom of hole (to avoid air bubbles) and inject 3. Allow adhesive to cure. Refer to product label or product pages in this book or
adhesive. If using retaining collar, place it in the hole and insert nozzle as Technical Data Sheets for curing times at various temperatures.
illustrated. Gradually withdraw nozzle to keep the nozzle tip at the surface of 4. Load anchor and apply torque (to threaded fixings) after appropriate cure time.
the adhesive. Continue injecting until hole is about filled. Dosing Cap (Part
Number 050969) is recommended for deep holes and hole diameters > 18 1. 2. 3. 4.
mm.
2. Insert fixing using a twisting / rotating motion into adhesive and wipe away
any excess. Retaining collar will hold rod in place while adhesive sets. With no
retaining collar, hold fixings in place by inserting 4 x plastic wedges between
the fixing and the concrete.
Fixing positions Hollow Block 1. Drill hole using correctly sized drill bit
Installation Guide
1. One fixing per block cavity only. through wall of hollow block or brick, see 1.
2. Minimum edge distance - block pack or product information.
2. Clean hole with correctly sized hole
cleaning brush with stiff nylon or wire
bristles. Using a combination Push/Pull
and twisting (rotation) motion, ensure the
Correct installation sides of the hole are scrubbed at least 3
times for the full depth of the hole.
3. Hollow block studs, threaded studs 2.
or threaded rod to be used should be
Do not fix in orange areas cleaned and free from oil, grease, flaking
rust or debris.
4. Insert correct sleeve or sieve into hole,
see page 30.
5. Remove nut from the cartridge and
Incorrect installation - not attach the correct Ramset mixing nozzle.
recommended (Ultrafix Plus pull out and cut plastic 4.
bag)
6. Mount assembled cartridge into the
Ramset Universal Applicator (Mount
Ultrafix Plus in regular caulking gun).
Fixing positions Hollow Brick
1. Only one fixing recommended 7. Open the orange valve (Not necessary
per brick. for Ultrafix Plus). Turn so arrow points
2. Minimum edge distance 1 brick forward. Dispense adhesive to waste
until an even, uniform grey is achieved. 8.
Approximately 2-3 trigger pulls should be
adequate. The initial flow is unsuitable for
fastening and must not be used.
Correct installation
8. Inject adhesive until the sleeve/sieve
is filled, slowly withdraw nozzle and
complete filling.
9. Once the required fill is obtained release
the pressure by pressing rear trigger. 10.
10. Push the stud into the hole using a slow
twisting motion. Wipe away excess
material.
Performance will be significantly Incorrect installation -
reduced not recommended 11. Do not touch anchor until mixture has
hardened and do not load anchor until
curing is complete.
12. Attach fixture and tighten nut in
accordance with recommended
tightening torque.
Notes
Anchoring Principles 42
Selection Guide 44
Heavy Duty Anchors 45
SpaTec Plus
Boa Coil
TruBolt
Specialised Anchors 77
Stainless Steel Trubolt
InsulFast Drill Anchor
Seismic Anchors
Impact
Impact Setting Anchors are set with hammer blows. They can either be a
Shear (80 a 90)
single element or an anchor with an expander component. The difference
between Impact Setting Anchors and Displacement Setting Anchors is that
Impact Setting Anchors do not require a controlled measure to achieve a set.
Load Assisted
Load Assisted Anchors are set by the application of a tension load. They also
do not require a controlled measure to achieve a set. This type of anchor is
usually only used as a suspension anchor.
If your required load angle is more complex, i.e. a combination of tensile and
shear loads, please consult the Ramset Specifiers Resource Book or
Anchoring Methods qualified engineer for more information.
Expansion
Expansion Anchors are generally installed in a pre-drilled hole with a
diameter slightly larger than the outer diameter of the anchor. The anchors
diameter is then expanded at the bottom end utilising the appropriate setting
method. This expansion creates a high friction force between the base of Load Classification
the anchor and the wall of the hole. The surrounding substrate contains and Static Load
restricts the expansion forces and holds the anchor in place. An applied load is static when it changes very little over time.
Anchor Spacing
Taking into account the stress values created by mechanical anchors and the loads they are designed to support, the following points must be considered
when establishing the performance of each individual product (recommended load):
Anchoring Principles
The minimum distance between anchors (a)
The distance of anchors from edges of the slab or structure (e)
Concrete
Plasterboard
Aerated Concrete
Particleboard
Cement Sheet
Hollow Block
Hollow Brick
Hollow Slab
Solid Stone
Solid Block
Solid Brick
Timber
Mechanical Anchor
SpaTec Plus Safety Anchors 4
Boa Coil Expansion Anchors 4
Selection Guide
Related Products
DynaDrill Hole Cleaning Brush
Carbide Drill Bits Hole Cleaning Pump
Diamond Motor Wet and Dry Vacuum
Diamond Core Drill Bits
Installation
Part No Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
NZ SP06065
ONLY SP06080
M6
M6
5
20
65
80
10
10
12
12
70
70
55 100
70 100
SP08065 M8 1 65 12 14 80 61 100
SP08090 M8 20 90 12 14 80 80 50
SP12NUT M12 105
SP10075 M10 1 75 15 17 90 71 25
Part No Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
NZ SP08095F M8
ONLY SP10105F M10
26
27
95
105
12
15
14
17
80
90
86 50
97 25
SP12130F M12 40 130 18 20 90 120 10
Available to order.
Lead times apply.
SpaTec Plus Safety Anchors - Hex Bolt - Stainless Steel Grade AISI 316 (A4) ZINC
Electroplated
ZINC
Electroplated
Galvanised Stainless
Steel 316
5.8
Carbon Steel
Part No Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
SP10105SS M10 25 115 15 17 90 95 25
SP12120SS M12 25 120 18 20 105 105 25
SP16145ESS* M16 25 157 24 26 130 120 10
*The design engineer should ensure the structural element is capable of supporting these loads.
Refer to Ramset Specifiers Resource Book for more information or explanation of technical data.
5.8
ZINC ZINC Galvanised Stainless Carbon Steel
Electroplated Electroplated Steel 316
Related Products
DynaDrill Hole Cleaning Pump
Carbide Drill Bits Wet and Dry Vacuum
Diamond Motor Impact Wrench
Diamond Core Drill Bits Boa Coils
Hole Cleaning Brush
Part No Anchor Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size (mm) Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
BAC08075 13 12 75 13 14 90 59 50
BAC08100 13 30 100 13 14 100 84 50
BAC10090 16 12 90 16 19 105 71 25
BAC10125 16 40 125 16 19 130 106 25
BAC12115 19 25 115 19 21 120 93 20
Boa Coil Expansion Anchors - Indicative Working Loads in 32MPa Concrete ZINC
Electroplated
ZINC
Electroplated
Galvanised Stainless
Steel 316
5.8
Carbon Steel
Anchor Embedment Torque Min Edge Min Anchor Max Tensile Max Shear
Size Depth (mm) (turns to set) Distance (mm) Spacing (mm) Load, Na (kN)* Load, Va (kN)*
13 75 5 turns 80 160 12.6 15.4
16 90 5 turns 100 200 18.6 26.0
19 80 5 turns 120 230 19.6 28.4
*The design engineer should ensure the structural element is capable of supporting these loads.
Refer to Ramset Specifiers Resource Book for more information or explanation of technical data.
Anchor diameter
equals Hole diameter
Materials
Anti-rotation expansion sleeve
5.8
ZINC ZINC Galvanised Stainless Carbon Steel
Electroplated Electroplated Steel 316
Related Products
DynaDrill Hole Cleaning Pump
Carbide Drill Bits Wet and Dry Vacuum
Diamond Motor
Diamond Core Drill Bits
Hole Cleaning Brush
Part No Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length Qty
Part No Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length Qty
Heavy Duty Anchors
T12080GH M12 6 80 12 15 90 58 20
T12100GH M12 25 100 12 15 105 71 20
Part No Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length Qty
AU
ONLY
T06055 M6 15 55 6 8 55 38 100
T06085 M6 45 85 6 8 75 68 100
T06120 M6 80 120 6 8 75 103 50
T06150 M6 110 150 6 8 75 133 100
T06180 M6 140 180 6 8 75 163 100
T08065 M8 12 65 8 10 65 45 50
T08090 M8 40 90 8 10 75 70 50
T10075 M10 12 75 10 12 80 52 50
T10090 M10 30 90 10 12 90 67 50
T10120 M10 50 120 10 12 100 97 20
T12080 M12 6 80 12 15 90 58 20
T12100 M12 25 100 12 15 105 71 20
T12120 M12 45 120 12 15 105 93 20
T12140 M12 65 140 12 15 105 111 20
T12180 M12 100 180 12 15 125 151 20
T16110 M16 8 110 16 19 125 67 20
T16125 M16 20 125 16 19 135 85 20
T16150 M16 45 150 16 19 145 110 20
T16175 M16 70 175 16 19 145 135 20
T20140 M20 10 140 20 24 160 85 10
T20160 M20 35 160 20 24 170 115 10
T20215 M20 90 215 20 24 200 170 10
*The design engineer should ensure the structural element is capable of supporting these loads.
Refer to Ramset Specifiers Resource Book for more information or explanation of technical data.
Hardened, ductile
NEERWCS
carbon
steel construction
W EAD
Flanged/Washered Head prevents
head embedment into timber and
THR
provides larger clamping surface area
Clear branding of product for easy
identification and inspection after Serrated washer face aids clamping
installation of fixture to substrate and helps Patented WERCS sawtooth thread
guard against loosening design provides clearance for rapid
Materials removal of material
Reduces jamming
Reduces installation torque by around 50%
5.8 Increases ease of installation
ZINC ZINC Galvanised Stainless Carbon Steel
Electroplated Electroplated Steel 316
Installation
Part No Finish Anchor Maximum Overall Drill Fixture Hole Min Hole Socket Qty
Size Fixture Anchor Diameter Diameter Depth Size
(mm) Thickness Length (mm) (mm) (mm) (mm)
(mm) (mm)
NZ SHW4 -134 410SS 5mm 19mm 45mm 5mm 7mm 55mm Minus Fixture Thickness 8mm 100
ONLY SPF4 -334 410SS 5mm 69mm 95mm 5mm 7mm 105mm Minus Fixture Thickness 8mm 100
ONLY AS06075W100 ZINC 6mm 45 mm 75mm 6 mm 8 mm 85mm Minus Fixture Thickness 10 mm 100
AS06100W100 ZINC 6mm 70 mm 100mm 6 mm 8 mm 110mm Minus Fixture Thickness 10 mm 100
AS08060W100 ZINC 8mm 20 mm 60mm 8 mm 10 mm 75mm Minus Fixture Thickness 13 mm 100
AS08075W100 ZINC 8mm 35 mm 75mm 8 mm 10 mm 90mm Minus Fixture Thickness 13 mm 100
AS08100W100 ZINC 8mm 60 mm 100mm 8 mm 10 mm 115mm Minus Fixture Thickness 13 mm 100
AS10060W50 ZINC 10mm 10 mm 60mm 10 mm 13 mm 80 mm Minus Fixture Thickness 15 mm 50
AS10075W50 ZINC 10mm 25 mm 75mm 10 mm 13 mm 95 mm Minus Fixture Thickness 15 mm 50
AS10100W50 ZINC 10mm 50 mm 100mm 10 mm 13 mm 120 mm Minus Fixture Thickness 15 mm 50
AS12075W50 ZINC 12mm 15 mm 75mm 12 mm 15 mm 100 mm Minus Fixture Thickness 16 mm 50
AS12100W50 ZINC 12mm 40 mm 100mm 12 mm 15 mm 125 mm Minus Fixture Thickness 16 mm 50
AS12150W20 ZINC 12mm 90 mm 150mm 12 mm 15 mm 175 mm Minus Fixture Thickness 16 mm 20
AnkaScrew Screw-In Anchors - Indicative Working Loads in 32MPa Concrete
Anchor Size/ Embedment Min Edge Min Anchor Max Tensile Max Shear
Hole (mm) Depth (mm) Distance (mm) Spacing (mm) Load, Na (kN)* Load, Va (kN)*
6 45 60 35 4.1 4.5
8 60 80 45 6.6 8.4
10 75 100 60 9.8 13.8
12 90 120 70 14.4 16.7
*The design engineer should ensure the structural element is capable of supporting these loads.
Refer to Ramset Specifiers Resource Book for more information or explanation of technical data.
5.8
ZINC ZINC Galvanised Stainless Carbon Steel
Electroplated Electroplated Steel 316
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
D6026 M4.5 3 26 6 8 30 23 100
DP06040 M4.5 12 38 6 8 45 34 100
DP06060 M4.5 30 57 6 8 55 53 100
DP08040 M6 6 40 8 10 50 34 100
DP08065 M6 25 66 8 10 65 60 50
DP08090 M6 50 92 8 10 75 86 50
DP10040 M8 3 41 10 12 50 34 50
DP10050 M8 20 49 10 12 55 42 50
DP10075 M8 30 76 10 12 65 69 50
DP10100 M8 50 103 10 12 80 96 25
AU
ONLY
DP10125 M8 80 124 10 12 85 117 25
DP12060 M10 10 55 12 15 70 47 25
DP12070 M10 15 70 12 15 70 62 25
DP12100 M10 45 98 12 15 95 90 20
DP12125 M10 70 126 12 15 95 118 20
DP16065 M12 6 62 16 19 80 51 20
DP16110 M12 35 106 16 19 120 95 10
DP16140 M12 65 140 16 19 120 129 10
DP20080 M16 8 81 20 24 100 70 10
DP20115 M16 25 113 20 24 125 102 5
DP20160 M16 70 157 20 24 155 146 5
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) Hole (mm) Depth (mm) Length (mm) Qty
DP10040GH M8 3 41 10 12 50 34 50
Medium Duty Anchors
AU
ONLY
DP10050GH M8 20 49 10 12 55 42 50
DP10075GH M8 30 76 10 12 65 69 50
DP10100GH M8 50 103 10 12 80 96 25
DP12060GH M10 10 55 12 15 70 47 25
DP12070GH M10 15 70 12 15 70 62 25
DP12100GH M10 45 98 12 15 95 90 20
DP12125GH M10 70 126 12 15 95 118 20
DP16065GH M12 6 62 16 19 80 51 20
DP16110GH M12 35 106 16 19 120 95 10
DP16140GH M12 65 140 16 19 120 129 10
DP20080GH M16 8 81 20 24 100 70 10
DP20115GH M16 25 113 20 24 125 102 5
DynaBolt Plus Sleeve Anchor Hex Nut - Stainless Steel Grade AISI 316 (A4) ZINC
Electroplated
ZINC
Electroplated
Galvanised Stainless
Steel 316
5.8
Carbon Steel
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) Hole (mm) Depth (mm) Length (mm) Qty
DP06040SS M4.5 12 38 6 8 45 34 100
DP06060SS M4.5 30 57 6 8 55 53 100
DP08040SS M6 6 40 8 10 50 34 100
DP08065SS M6 25 66 8 10 65 60 50
DP10050SS M8 20 49 10 12 55 42 50
DP10075SS M8 30 76 10 12 65 69 50
DP10100SS M8 50 103 10 12 80 96 25
DP12060SS M10 10 55 12 15 70 47 25
DP12070SS M10 15 70 12 15 70 62 25
AU
ONLY
DP12100SS M10 45 98 12 15 95 90 20
DP12125SS M10 70 126 12 15 95 118 20
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) Hole (mm) Depth (mm) Length (mm) Qty
AU
ONLY
DP08045H M6 15 45 8 10 55 34 100
DP08070H M6 32 70 8 10 65 60 50
DP10045H M8 8 45 10 12 55 34 50
DP10055H M8 20 55 10 12 55 42 50
DP10080H M8 30 80 10 12 80 69 50
DP10105H M8 60 105 10 12 85 96 25
DP12065H M10 15 65 12 15 75 47 25
DP12075H M10 20 75 12 15 75 62 25
DP12105H M10 50 110 12 15 95 90 20
DP16110H M12 49 110 16 19 95 95 10
DynaBolt Sleeve Anchor Hex Bolt- Stainless Steel Grade AISI 316 (A4) ZINC
Electroplated
ZINC
Electroplated
Galvanised Stainless
Steel 316
5.8
Carbon Steel
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
DP10105HSS M8 60 105 10 12 85 96 25
DP12075HSS M10 20 75 12 15 75 62 25
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) Hole (mm) Depth (mm) Length (mm) Qty
AU D6032R
ONLY DP06055R
M4.5 5 32 6 8 40 30 100
M4.5 25 55 6 8 50 25 100
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) Hole (mm) Depth (mm) Length (mm) Qty
D6034F M4.5 10 34 6 8 40 30 100
DP06060F M4.5 30 60 6 8 50 25 100
DP06075F M4.5 45 75 6 8 50 25 100
DP06100F M4.5 70 100 6 8 60 25 100
DP08060F M6 20 60 8 10 70 30 100
DP08085F M6 45 85 8 10 75 30 50
DP10075F M8 30 75 10 12 85 34 50
DP10100F M8 55 100 10 12 85 34 50
AU DP10125F
ONLY
M8 80 125 10 12 105 34 25
DynaBolt Sleeve Anchor Countersunk Head- Stainless Steel Grade AISI 316 (A4) ZINC
Electroplated
ZINC
Electroplated
Galvanised Stainless
Steel 316
5.8
Carbon Steel
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) Hole (mm) Depth (mm) Length (mm) Qty
AU DP06060FSS
ONLY DP06075FSS
M4.5 30 60 6 8 50 25 100
M4.5 45 75 6 8 50 25 100
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Medium Duty Anchors
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
DO6026S M4.5 - 26 6 - 30 23 500
D06038S M4.5 - 38 6 - 41 34 100
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
D08042E M6 - 42 8 - 50 34 100
AU
ONLY
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
D08045K M6 - 47 8 - 55 32 100
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
D08045X M6 - 47 8 - 55 32 100
*The design engineer should ensure the structural element is capable of supporting these loads.
Refer to Ramset Specifiers Resource Book for more information or explanation of technical data.
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
DynaBolt Decorative Post Head - Countersunk - ZincPlated & Stainless Steel 316 ZINC
Electroplated
ZINC
Electroplated
Galvanised
ZINC
Electroplated
Stainless
ZINC
Steel 316
Electroplated
5.8
Carbon Steel
Galvanised Stainless
Steel 316
5.8
Carbon Steel
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
DF045SS* M4.5 - 23 - 8 - - 100
AU RFM06
ONLY DF06SS*
M6 - 23 - 10 - - 100
M6 - 23 - 10 - - 100
RFM08 M8 - 27 - 12 - - 100
DF08SS* M8 - 27 - 12 - - 100
*Denotes Stainless Steel Grade AISI 316 (A4)
DynaBolt Decorative Post Head - Round - ZincPlated & Stainless Steel 316 ZINC
Electroplated
ZINC
Electroplated
Galvanised
ZINC
Electroplated
Stainless
ZINC
Steel 316
Electroplated
5.8
Carbon Steel
Galvanised Stainless
Steel 316
5.8
Carbon Steel
Part No. Thread Max Fixture Overall Anchor Drilled Hole Fixture Hole Min Hole Effective Order
Size Thickness (mm) Length (mm) (mm) (mm) Depth (mm) Length (mm) Qty
AU DR045SS* M4.5
ONLY DR06 M6 - 22 -
- 22 - 8 - - 100
10 - - 100
DR06SS* M6 - 22 - 10 - - 100
*Denotes Stainless Steel Grade AISI 316 (A4)
Internally threaded
anchor places
no restrictions on
fixture thickness
Medium Duty Anchors
5.8 5.8
ZINC ZINC
Galvanised Stainless
Galvanised Carbon
Stainless
Steel Carbon Steel
Electroplated Electroplated Steel 316 Steel 316
Related Products
DynaDrill Hole Cleaning Pump
Carbide Drill Bits Wet and Dry Vacuum
Diamond Motor DynaSet Setting Tool
Diamond Core Drill Bits Safety Ring Anchor
Hole Cleaning Brush
Installation
Part No Thread Thread Overall Anchor Drilled Hole Min Hole Setting Order
Size Length (mm) Length (mm) (mm) Depth (mm) Tool Qty
DSM06 M6 11 25 8 28 SETDS1 100
DSM08 M8 13 30 10 33 SETDS2 100
DSM10 M10 16 40 12 43 SETDS3 50
DSM12 M12 21 50 16 53 SETDS4 50
DSM16 M16 28 65 20 68 SETDS5 25
DSM20 M20 35 80 25 83 SETDS6 25
Part No Thread Thread Overall Anchor Drilled Hole Min Hole Setting Order
Size Length (mm) Length (mm) (mm) Depth (mm) Tool Qty
DSF06 M6 11 25 8 28 SETDS1 100
DSF10 M10 14 30 12 33 SETDF3 100
RAP01* M10 14 30 12 33 SETDF3 500
DSF12 M12 21 50 16 53 SETDS4 50
RAP12* M12 21 50 16 53 SETDS4 200
* Rod Anchoring Pack (RAP) includes setting tool in a handy carry bucket
Part No Thread Thread Overall Anchor Drilled Hole Min Hole Setting Order
Size Length (mm) Length (mm) (mm) Depth (mm) Tool Qty
DSM06SS M6 11 25 8 28 SETDS1 100
DSM08SS M8 13 30 10 33 SETDS2 100
DSM10SS M10 16 40 12 43 SETDS3 50
DSM12SS M12 21 50 15 53 SETDS4*/SETDSA4 50
DSM16SS M16 28 60 20 68 SETDS5 25
* Not to be used with DSM12SS when installing Safety Ring Anchor
Installation
1. Drill or core a 15mm hole to depth of 130mm 2.5mm. Clean the hole thorougly
with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or
vacuum.
2. Check depth is correct, using the reverse e nd of the setting tool (SETSA4).
The depth indicator groove MUST be level with the concrete surface.
3. Insert the DSM12SS into the hole
by knocking it in, using the reverse end of the setting tool.
4. Using a hammer and the setting tool, drive t he expansion plug into the anchor until
the depth indication groove is level with the c oncretesurface. If this cannot be
achieved, an alternative anchor point location must be selected.
5. Insert safety ring anchor and rubber seal. Tighten with a bar to the following
Tightening Specification:
a. Using a bar not more than 100mm long
(the bar should not bend during installation).
b. Using a 150mm long bar, not more than 10mm in diameter and of yield
strength not exceeding 300MPa. R10 reinforcement bar is suitable for this
purpose. When the bar starts to bend, the anchor ring should be returned back to
the closest vertical orientation.
Ensure the anchor ring is left in a vertical position.
The DynaSet will remain in position if the safety ring anchor is removed.
Countersunk
Materials
5.8 5.8
ZINC
ZINC ZINC
Galvanised Stainless
Galvanised Carbon
Stainless
Steel Carbon Steel
Electroplated
Electroplated Electroplated Steel 316 Steel 316
Part No Anchor Max Fixture Overall Anchor Drilled Hole Min Hole Order
Size (mm) Thickness (mm) Length (mm) (mm) Depth (mm) Qty
ED05033 5 6 33 5 40 100
AU
ONLY
ED05050 5 20 50 5 45 100
ED06042 6 12 42 6 50 100
ED06055 6 25 55 6 50 100
ED06075 6 40 70 6 50 100
AU ED08080 8
ONLY ED08120 8
30 75 8 80 50
75 120 8 95 50
EasyDrive Nylon Anchors - Stainless Steel AISI 316 (A4) Drive Screw ZINC
Electroplated
ZINC
Electroplated
Galvanised Stainless
Steel 316
5.8
Carbon Steel
Part No Anchor Max Fixture Overall Anchor Drilled Hole Min Hole Order
Size (mm) Thickness (mm) Length (mm) (mm) Depth (mm) Qty
ED05033SS 5 6 33 5 40 100
ED06042SS 6 12 42 6 50 100
ED06055SS 6 25 55 6 50 100
ED06075SS 6 40 70 6 50 100
Materials
Nylon 5.8 5.8
ZINC
olid Concrete ZINC
ZINC ZINC
Galvanised
Solid Brick Stainless
Galvanised Carbon
Stainless
Steel Carbon Steel
Electroplated Electroplated
Electroplated Electroplated Steel 316 Steel 316
5.8 5.8
ZINC
Galvanised Stainless
ZINC Carbon Steel
Galvanised Stainless Carbon Steel
Electroplated Electroplated
Steel 316 Steel 316
Note: The ShureDrive Drive Anchor should not be used for top fix or
overhead appications
Specification
Material Zinc Alloy Body, Carbon Steel Nail
Corrosion Protection Zinc Plating Related Products
Head Style - Anchor Mushroom DynaDrill / Hammer Drill Driver
Fixing Method Through Fixture Carbide Drill Bits
Setting Method Impact Hole Cleaning Pump
Anchoring Method Interference Fit Wet and Dry Vacuum
Drilled Hole Diameters 5mm, 6mm
Anchor Lengths 22mm, 30mm, 50mm
Maximum Fixture Thickness 3mm, 5mm, 25mm
Substrates Concrete, Stone, Solid Brick, Solid Block,
Grout Filled Block, Hollow Brick, Hollow Block,
Hollow Slab
ShureDrive Anchors
Part No Anchor Max Fixture Overall Anchor Head Drilled Fixture Hole Min Hole Order
Size Thickness Length Hole Depth Qty
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
SDM05022 5 3 22 11 5 6 30 100
SDM06030 6 5 30 13 6 7 35 100
SDM06030SS 6 5 30 13 6 7 35 100
SDM06050 6 25 50 13 6 7 55 100
Pre-assembled washer
improves pullover strength
(CW - Washered range only)
Light Duty Anchors
Materials
5.8 5.8
ZINC
Galvanised Stainless
ZINC Carbon Steel
Galvanised Stainless Carbon Steel
Electroplated Electroplated
Steel 316 Steel 316
Caution
Always wear eye protection when setting concrete nails.
Always strike the nail head squarely with the hammer face.
Specification
Material Carbon Steel
Corrosion Protection Zinc Plating, Mechanical Galvanising
Head Style Flat, Countersunk, Bullet
Fixing Method Through fixture
Setting Method Impact
Anchoring Method Interference fit
Shank Diameters 2.4mm, 3.2mm, 3.8mm
Anchor Length 25mm, 30mm, 40mm, 50mm,
60mm, 75mm
Maximum Fixture Thickness up to 50mm
Substrates Concrete, Solid Block
Concrete Nails
Part No Description Shank (mm) Overall Length (mm) Order Qty
AU
ONLY
CD425 Plain 2.4 25 100
CD430 Plain 2.4 30 100
CD440 Plain 2.4 40 100
CD525 Plain 3.2 25 100
CD540 Plain 3.2 40 100
CF650 Plain 3.8 50 100
CF660 Plain 3.8 60 100
CF675 Plain 3.8 75 100
CW415 Washered 2.4 15 100
CW415Q500 Washered 2.4 15 500
CW420 Washered 2.4 20 100
CW420Q500 Washered 2.4 20 500
CW425 Washered 2.4 25 100
CW425Q500 Washered 2.4 25 500
CW430 Washered 2.4 30 100
CW430Q500 Washered 2.4 30 500
CW440 Washered 2.4 40 100
CK540 Striated 3.2 38 100
CK750 Striated 3.6 50 100
CK760 Striated 4.0 63 100
CK775 Striated 4.2 75 100
Trubolt
Concrete
Ramset TruBolt Advantages:
A self expanding stud anchor. Torque controlled mechanical
through fixing, for speed and afficiency on site. Conforms to
ETA option 1, approved for an assured fix into cracked and
non-cracked concrete.
ETA Option 1 approved anchor For cracked and non-
cracked concrete
Highest Performance in Cracked Concrete for floor, wall
and overhead applications
TR020 Fire tested Fire Rated Performance up to 120
minutes
FM Approved
Transport for London Underground authorised for use
Nut of Class 8 European Standard
Approvals
Certification
European Technical Approval ETAG 001-5 Option 1
FM Approved
Transport for London Underground authorised for use
Substrates
Concrete
Solid Stone
Applications
All steel constuctions
Facades
Curtain wall
Staircases
Ladders
Technical Specification Guide railings
Bolt: A4 70 grade X2 Cr Ni Mo 17-12-2 NF ISO / DIS 3506-1 Stadium seating
Expansion sleeve: A4 grade X2 Cr Ni Mo 17-12-2 NF EN 10088-2
Washer: A4 grade X5 Cr Ni Mo a1-12-2
Nut: A4 80 grade X5 Cr Ni Mo 17-12-2 F ISO / DIS 3606 2 100134
Installation
1. Drill or core a hole to the recommended diameter (same as the TruBolt) and depth using the
fixture as a template.
Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump,
compressed air, or vacuum.
2. Insert the anchor through the fixture and drive with a hammer until the washer contacts the fixture.
3. Tighten the nut with a torque wrench to the specified assembly torque.
NZ
ONLY
Product Range - ISO Universal Insulation Anchor Indicative Loads - Wall Insulation Substrates
Anchor (mm) C20/25 Tensile Load (kN) Hollow Concrete Block Tensile Solid Brick Tensile Load (kN)
Load (kN)
10 - 30 0.15kN 0.07kN 0.15kN
Product Range - ISO Universal Insulation Anchor Indicative - Soffit Insulation Substrates
Anchor (mm) C20/25 Tensile Load (kN) Hollow Concrete Block Tensile Solid Brick Tensile Load (kN)
Load (kN)
10 - 30 0.07kN 0.04kN 0.07kN
Insulation Anchor Ma
AU
ONLY
Gripping barbs
Specialised Anchors
Extruded Polystyrene Fibreglass / Rockwool Expanded Polystyrene
(Compatibility dependent on ability
to drill through insulation)
Installation
1. Drill an 8mm hole through the insulation and a further 45mm into the
substrate.
2. Insert the anchor through the insulation and into the pre-drilled hole.
3. Using light hammer blows, drive the anchor into the hole until the head of
the anchor is in contact with the insulation and the insulation is firmly held
against the substrate.
Seismic
Starter Bars
Rebar connections
EPCONC8 used to
for wall, slab, CSTB-3/12-727
install post-installed
columns and beams Test as per ACI 355.4
rebar
Starter Bars
Anchor Type Anchor Size (Nominal) Drill Bit Size Socket Type & Size Anchor Part Number
Tapcon Screw Anchor
8mm x 55mm 6.5mm DR.DEEP IMP SOCKET 10mm 3511407
Tapcon Screw Anchor 8mm x 75mm 6.5mm DR.DEEP IMP SOCKET 10mm 3507407
Tapcon Screw Anchor
9.5mm x 75mm 9.5mm DR.DEEP IMP SOCKET 15mm LDT3830
Tapcon Screw Anchor 9.5mm x 100mm 9.5mm DR.DEEP IMP SOCKET 15mm LDT3840
Tapcon Screw Anchor 13mm x 150mm 13mm DR.DEEP IMP SOCKET 19mm LDT1260
SAMMYS Screw Anchor for
M10 x 45mm 6.5mm SAMMYS #14 P/No 8113910 8173957
Threaded Rod
SpaTec Plus Anchor 15mm x 105mm 15mm Socket to suit M10 Hex Head SP10105
Anti-rotation barbs
Flush head
Plasterboard & Cavity Anchors
NYLON METAL
STATE BRANCHES
In the interests of product improvement, Ramset reserves the right to alter product specifications as required. Information included in this resource book is correct at time of printing.
It is the responsibility of the user to ensure product selected is appropriate for its intended use. For further technical information go to www.ramset.com.au or contact Ramset on the numbers
indicated. ITW Australia Pty. Ltd. ABN 63 004 235 063 trading as Ramset Copyright 2015 Trademarks of Cetram Pty. Ltd. used under license by Ramset
PART No.RAMCMA2015ANZ